I do this because we declare-and-initialize some variables in the case.
This isn't strictly necessary, since there's no cross-initialization
errors since it's the last case in the switch, but I'd just like to be
future-proof.
Instead of repeating 'ed.level[curlevel]' (or even worse, you type in
that giant expression inside the brackets instead of reusing
'curlevel'), why not just type 'room'? As an added bonus, I added bounds
checks so 'room' is always guaranteed to point to an existing object.
There are some levels that index 'ed.level' out of bounds, and I'd like
to make their behavior properly defined instead of being undefined. One
of the things usually true about out-of-bounds rooms is that they're
always tiles2.png (that means an edlevelclass tileset that isn't 0),
because the chance of the memory location being exactly 0 is smaller
than it being nonzero. So the out-of-bounds room has tileset 1.
Again, it used this severely overcomplicated expression for god knows
what reason. I've replaced it with a simpler one. Also it's const just
to indicate intent.
Previously it copy-pasted this god-awful overcomplicated expression
(possibly for cursed ActionScript legacy reasons?) everywhere, instead
of putting it in a variable, or even just using a simpler one like the
one I replaced it with.
Now the obj.createentity() and obj.createblock() calls are much nicer.
Now if your cursor was at the bottom of the screen when you entered
playtesting but then was moved to the top during playtesting, when you
exit, the roomname won't instantly disappear and then sheepishly rise
back up again.
And if your cursor was at the bottom of the screen when you entered
playtesting, and exited still being that way, the roomname will rise
back down again and won't instantly disappear.
Both of these behaviors make the roomname movement much more continuous
than it was previously, and it feels smoother and less janky.
Also, use inspecial() instead of writing out each part of the
conditional separately. This just basically adds the insecretlab
conditional to the if-statement, which shouldn't be a big deal.
There's no reason you shouldn't be allowed to press Enter on teleporters
during playtesting.
Well, except that you can press Esc in the teleporter menu in order to
go to the pause menu, which isn't intended in playtesting. But I can
just add a check there so that pressing Esc closes the teleporter menu
instead, it's fine.
graphics.textbox.clear() should be used instead of
graphics.textboxremove() or graphics.textboxremovefast(), because even
with graphics.textboxremovefast(), you'll still have to process at least
one frame of GAMEMODE logic before the text boxes are actually properly
removed, and this caused a 1-frame glitch when exiting playtesting with
text boxes on-screen and then re-entering playtesting.
Technically I could've only fixed it in Game::returntoeditor(), but I
wanted to be safe, so I also fixed it in scriptclass::hardreset(), too.
This fixes a bug where the settings menu would immediately be brought up
if you used Esc to exit playtesting, unless you were an incredible ninja
and only pressed it for exactly one frame.
This fixes an annoying bug where if you use Up or Down to press ACTION
on the "All crewmates rescued!" dialogue whenever you rescue the last
crewmate during playtesting, it'll move you to the room above or below
you. This is because ed.keydelay isn't set to 6 (which is the standard
value that it gets set to whenever you press most keys in the editor),
but now it is.
The shouldreturntoeditor variable is supposed to be used because it
fixes the warp background not being reset if you exit into a
horizontally/vertically warping room with a different background. It
also properly resets other variables, which is good, too.
Instead of using gamestates, just directly use the 'script' attribute of
a script box if it is non-empty.
This is accomplished by having to return the index of the block that the
player collides with, so callers can inspect the 'script' attribute of
the block themselves, and do their logic accordingly.
game.customscript is an unnecessary middleman, but it will be kept
around for compatibility reasons. However, it's still possible to crash
the game, so I'm adding this bounds check.
To avoid going through gamestates, we'll need to carry the name of the
script on the script box itself. And to do that, we'll need to set the
'script' attribute of script boxes when translating edentities into real
entities in custom levels.
This patch optimizes the loop used to limit the framerate in 30-FPS-only
mode so that it uses SDL_Delay() instead of an accumulator. This means
that the game will take up less CPU power in 30-FPS-only mode. This also
means that the game loop code has been simplified, so there's only two
while-loops, and only two places where game.over30mode is checked, thus
leading to easier-to-understand logic.
Using an accumulator here would essentially mean busywaiting until the
34 millisecond timer was up. (The following is just what leo60228 told
me.) Busywaiting is bad because it's inefficient. The operating system
assumes that if you're busywaiting, you're performing a complex
calculation and handles your process accordingly. And this is why
sleeping was invented, so you could busywait without taking up
unnecessary CPU time.
When I moved duplicate player entity removal to
scriptclass::hardreset(), I also inadvertently made it so all non-player
entities got removed as well, even though this wasn't my intent. And
thus, pressing Enter to restart a time trial removes every entity except
the player, since it calls script.hardreset().
The time trial script.hardreset() is bad for other reasons (see #367),
however it's still a good idea to reset only what's needed in
script.hardreset().
There's a bug where playtesting from Ved doesn't properly play the music
of the level, due to no fault with Ved.
This was because the music was being faded out by
scriptclass::startgamemode() case 23 after main() called music.play().
To fix this, just call music.play() when all the other variables are
being set in Game::customloadquick().
So you get a trophy and achievement for completing the game in Flip
Mode. Which begs the question, how does the game know that you've played
through the game in Flip Mode the entire way, and haven't switched it
off at any point? It looks like if you play normally all the way up
until the checkpoint in V, and then turn on Flip Mode, the game won't
give you the trophy. What gives?
Well, actually, what happens is that every time you press Enter on a
teleporter, the game will set flag 73 to true if you're NOT in Flip
Mode. Then when Game Complete runs, the game will check if flag 73 is
off, and then give you the achievement and trophy accordingly.
However, what this means is that you could just save your game before
pressing Enter on a teleporter, then quit and go into options, turn on
Flip Mode, use the teleporter, then save your game (it's automatically
saved since you just used a teleporter), quit and go into options, and
turn it off. Then you'd get the Flip Mode trophy even though you haven't
actually played the entire game in Flip Mode.
Furthermore, in 2.3 you can bring up the pause menu to toggle Flip Mode,
so you don't even have to quit to circumvent this detection.
To fix both of these exploits, I moved the turning on of flag 73 to
starting a new game, loading a quicksave, and loading a telesave (cases
0, 1, and 2 respectively in scriptclass::startgamemode()). I also added
a Flip Mode check to the routine that runs whenever you exit an options
menu back to the pause menu, so you can't circumvent the detection that
way, either.
The music for the Tower is supposed to be ecroF evitisoP in Flip Mode,
and Positive Force when not in Flip Mode. However, if you go to the
options from the pause menu and toggle Flip Mode, the music isn't
changed.
Fixing this is pretty simple, just check the current area if not in a
custom level and play the correct track accordingly when toggling Flip
Mode from in-game.
Gamestates 300..336 are used to start scripts in custom levels. However,
it looks like instead of having the cases have common code, each
individual case was copy-pasted numerous times, which is pretty
wasteful.
std::string is one of those special types that has a constructor that
just initializes itself to a blank state automatically. This means all
`std::string`s are by default already `""`, so there's no need to set
them. And in fact, cppcheck throws out warnings about performance due to
initializing `std::string`s this way.
I ran the game through cppcheck and it spat out a bunch of member
attributes that weren't being initialized. So I initialized them.
In the previous version of this commit, I added constructors to
GraphicsResources, otherlevelclass, labclass, warpclass, and finalclass,
but flibit says this changes the code flow enough that it's risky to
merge before 2.4, so I got rid of those constructors, too.
Looks like coins were basically a scrapped mechanic, although I'm not
sure what these attributes were for. I guess counting the number of
coins in each room? But why, when you can just make a function to count
them automatically? Whatever.
This is just in case these values happen to be used without being
initialized or anything. I vaguely recall someone reporting an issue
where they didn't have a "Documents" folder on Windows and their level
folder ended up being a garbage path, so it's good to do this.
There's a bug in the cutscene that plays if your companion is Vitellary
in the room "Now Stay Close To Me...". The relevant gamestate is
gamestate 43, which for Vitellary calls the script `int1yellow_4`.
When Vitellary says the text box "That big... C thing! I wonder what it
does?", Terry intended for Vitellary to change his facing direction to
the left, as you can see with the command `changedir(yellow,0)` in the
original scripting. `changedir()` just changes the `dir` attribute of an
entity, and a `dir` of 0 means face left and a `dir` of 1 means face
right.
Then when Vitellary says "Maybe we should take it back to the ship to
study it?", Terry intended for him to face rightwards once again, as
indicated by the `changedir(yellow,1)` command.
Unfortunately, what happens instead is that when Vitellary says the
first text box ("That big... C thing! I wonder what it does?"), he turns
left for precisely one frame, and then afterwards goes back to facing
right. Then the second text box comes around, but he's already facing
right. How come?
Well, the problem here is that Vitellary's AI for "follow Viridian" is
overriding his `dir` attribute. Vitellary's AI says "get close to
Viridian", but Vitellary is already close enough to them that he stays
put. However, he still turns to face them as part of that AI.
To fix that, we need to put him in the AI mode that specifically says to
face left, with the command `changeai(yellow,faceleft)`. That way, he no
longer has the AI mode of following Viridian, and he will actually look
left for the intended duration instead of only looking left for one
frame.
But then we have another problem. When the cutscene ends, Vitellary no
longer follows Viridian. I mean it makes sense - we just placed him in
"only face left" mode, not "follow Viridian" mode! And this is not
merely a visual problem, because Vitellary is a supercrewmate and the
game won't let the player walk off the screen if Vitellary isn't
offscreen yet.
To fix THAT issue, we'll need to put Vitellary back in "follow Viridian"
mode. It turns out that the `changeai()` command was more intended for
scripting crewmates (entity type 12), NOT supercrewmates (entity type
14). As such, the command assumes that you'll want state numbers that
apply to entity type 12, such as 10, 11, 12, 13, and 14, even though the
only one that applies to entity type 14 is state 0, and every other
state number just makes it so that the entity doesn't move an inch. And
specifying faceleft/faceright is just state number 17.
Luckily, we can still pass the raw state number to `changeai()`, we
don't have to use its intended names. So I do a `changeai(yellow,0)` to
set Vitellary's state number back to 0 when it comes time to make him
face right again.
As a bonus, I added comments to the changed lines. This is a semi-obtuse
method of scripting, so it's always good to clarify.
The spikes are removed if the game is in no death or time trial mode,
however the removal is accomplished by modifying a static array. So if
the player switches to no death or time trial mode and switches back to
regular play, the spikes will no longer be present until the game is
restarted.
This simple fix writes the spikes back to the static array if the game
is not in no death or time trial mode. Another option is to maintain 2
static arrays - one with the spikes and one without - but that is
needlessly wasteful and prone to mistakes (one array updated but not the
other).
For some reason, there were just exact duplicates of the talkgreen_2
script and alarmon/alarmoff commands. I have no idea why, but cppcheck
identified them.
Graphics::drawmenu() no longer has copy-pasted code for each individual
case. Instead, the individual cases have their own adding on to common
code, which is far easier to maintain.
Also, the only difference Graphics::drawlevelmenu() does is in some
y-positioning stuff. There's no reason to make it a whole separate
function and duplicate everything AGAIN. So it's been consolidated into
Graphics::drawmenu() as well, and I've added a boolean to draw a menu
this way if it's the level menu.
Instead, the string in MenuOption is just a buffer of 161 chars, which
is 40 chars (160 bytes if each were the largest possible UTF-8 character
size) plus a null terminator. This is because the maximum length of a
menu option that can be fit on the screen without going past is 40
chars.
There's no need to use a template here. Just manually call SDL_tolower()
or SDL_toupper() as needed.
Oh yeah, and use SDL_tolower() and SDL_toupper() instead of libc
tolower() and toupper().
I don't know how no one realized that the for-loop to (poorly)
initialize m_headers was basically unnecessary, and that the memset()
should've just been used instead. Well, except it should also be
replaced with SDL_memset(), but that's besides the point.
Also, I decided to hardcode the 128 thing less, in case people want to
fork the source code and make a build where it's changed.
So, originally, I wanted to keep them on Game, but it turns out that if
I initialize it in Game.cpp, the compiler will complain that other files
won't know what's actually inside the array. To do that, I'd have to
initialize it in Game.h. But I don't want to initialize it in Game.h
because that'd mean recompiling a lot of unnecessary files whenever
someone gets added to the credits.
So, I moved all the patrons, superpatrons, and GitHub contributors to a
new file, Credits.h, which only contains the list (and the credits max
position calculation). That way, whenever someone gets added, only the
minimal amount of files need to be recompiled.
They're always the same size, so there's no need for them to be vectors.
Also made the number of elements in ed.level/kludgewarpdir controllable
by maxwidth/maxheight.
I removed editorclass::saveconvertor() because I didn't want to convert
it to treat ed.contents like an array, because it's unused so I'd have
no way of testing it, plus it's also unused so it doesn't matter. Might
as well get rid of it.
These unused vars are:
- Graphics::bfontmask_rect
- Graphics::backgrounds
- Graphics::bfontmask
- GraphicsResources::im_bfontmask
While it seems that Graphics::backgrounds was indexed in
Graphics::drawbackground(), in reality there was never anything in that
vector and thus actually using it would cause a segfault.
map.contents always has 1200 tiles in it, there's no reason it should be
a vector.
This is a big commit because it requires changing all the level classes
to return a pointer to an array instead of returning a vector. Which
took a while for me to figure out, but eventually I did it. I tested to
make sure and there's no problems.
They're always fixed-size anyways, there's no need for them to be
vectors.
Also used the new INBOUNDS_ARR() macro for the map.explored bounds
checks in Script.cpp, and made map.explored a proper bool array instead
of an int array.
Again, basically no reason for it to exist on the class itself.
The usage of the variable was replaced with temp2 instead of temp
because there was already a temp variable in the function it was used
in.
Since they're always fixed-size, they don't need to be dynamically-sized
vectors.
entityclass::customcrewmoods is now a proper bool instead of an int now,
and I replaced the hardcoded constant 6 with a static const int Game
attribute to make it easier to change.
These are the besttimes, besttrinkets, bestlives, and bestrank
attributes of Game. bestframes was already a plain array.
As these are always fixed-sized, there's no reason for them to be
vectors. Also, I put their size in a static const int so it's easy to
change how many of them there are.
They're always fixed-size, so there's no need to them to be a dynamic
vector.
I changed their type to `bool` too because they don't need to be `int`s.
Also, I replaced the hardcoded 25 constant with at least a name, in case
people want to change it in the future.
It could index the `words` array out-of-bounds if there were more than
40 arguments in a command. Not like that would ever happen, but it's
still good to be sure.
In summary, if you got to gamestate 1002 or 1012 without an advancetext,
and you had completestop on, you were basically softlocked. So just add
those gamestates there and advance the gamestate if advancetext is off.
This infinite loop would occur because once you pressed left or right,
the game keeps searching through all the list of teleporters until it
finds one that is unlocked. But if there's none that are unlocked, then
the game goes into an infinite loop, which brings up the Not Responding
dialog on Windows so you can kill it.
Normally, you're not supposed to have no teleporters unlocked while
being able to access a teleporter, but you can achieve this by going to
Class Dismissed from a custom level (while making sure you don't start
in 0,0, because there's a teleporter there that you would unlock).
The solution is to make sure at least one teleporter is unlocked before
doing any searching.
A do-while is just a while-loop, but the inner block will always run
once before the conditional is checked.
It looks like in order to achieve this desired behavior (always run the
block once before checking the conditional), instead of using a do-while
loop, Terry just used a normal while-loop and copy-pasted the inner
block on the outside.
So I'm de-duplicating the code.
This was caused by the fact that not all unlocks were done through the
Game::unlocknum() function. Some just set the unlock number directly.
But it's fixed now.
Ved has this useful feature where instead of having to manually travel
to a room whose coordinates you know, you can just press G and type in
coordinates to go there.
VCE added this, but I changed the text to be "x,y" instead of "(x,y)"
because otherwise it could confuse someone into thinking they need to
type parentheses when in reality they don't need to and typing them will
just make it not work.
Also I made sure to add an error message if the user types in an invalid
format. Failing silently would just confuse people, and maybe they'll
start thinking the feature doesn't work or something like that. VCE
doesn't have this helpful error message.
Lastly, VCE has a bug where if you use the shortcut to go from one
horizontally/vertically warping room to another, the background of the
previous room will still be there and scroll off with the background of
the room you went to, instead of just having the new background only.
This is because they forgot a 'graphics.backgrounddrawn = false;'. But
don't worry, *I* didn't forget about it.
This is basically FIQ's patch from VCE, except he never upstreamed it
because he said something along the lines of it seeming to not fit the
purpose of upstream.
But anyway, it basically just de-duplicates all the text input and text
finishing handling code and cuts down on the large amount of copy-paste
in the editor functions. It makes things way more maintainable.
Interesting note, it seems like FIQ had the intent to refactor the text
input in editor settings (i.e. the level metadata details), but never
got around to it in VCE. Maybe we'll finish that job for him later.
The problem we're running into is entirely contained in the Screen - we need to
either decouple graphics context init from Screen::init or we need to take out
the screenbuffer interaction from loadstats (which I'm more in favor of since we
can just pull the config values and pass them to Screen::init later).
Allowing users to reverse cycle tilesets/tilecols/enemies prevents them
from having to press the hotkey a zillion times in order to get to the
one they want if the one they want just happens to be behind the current
one they're on.
This tilecol conveniently lets players use one of the unpatterned Space
Station tilesets you see on the left side of tiles.png but never get to
use without Direct Mode.
It does have a few weird quirks, but it should be safe to use.
Previously, it was:
if (ed.settingsmod)
{
(Settings menu controls)
...
}
else
{
(Literally everything else
Also a bunch of copy-pasted ed.keydelay checks)
...
}
Now it is:
if (ed.settingsmod)
{
(Settings menu controls)
...
}
else if (ed.keydelay > 0)
{
ed.keydelay--;
}
else if (key.keymap[SDLK_LCTRL] || key.keymap[SDLK_RCTRL])
{
// Ctrl modifiers
...
}
else if (key.keymap[SDLK_LSHIFT] || key.keymap[SDLK_RSHIFT])
{
// Shift modifiers
...
}
else
{
// No modifiers
ed.shiftkey = false;
...
}
It might not counteract how completely huge this code is, but it's at
least organized better.
Also, I had to change the map resize logic around slightly, else it'll
get triggered any time you do a shift modifier keypress.
Their drawframe needs to be incremented by 2 instead of 1, because
they're double-sized.
Animation type 3 is used by the cloud emitter in The Solution is
Dilution, animation type 6 is used by the radar dish in Comms Relay.
Animation type 4 is used by the maverick bus in B-B-B-Busted, but it's
not noticeable since it spawns offscreen. This bug would cause all of
those entities to appear incorrectly for the deltaframes between the
tick the room got loaded and the next tick after that.
This is noticeable in flibit's tweet showing off my over-30-FPS patch:
https://twitter.com/flibitijibibo/status/1273983014930993153
Now that you have a mini menu in MAPMODE, it's a bit annoying to have to
deal with the slowed-down timestep when pressing left/right/ACTION
inside it. Especially since going to an options menu restores the
timestep back to normal (because it's in TITLEMODE). Also removed it
from TELEPORTERMODE for consistency.
That way, they don't show up as "?: something else" and their proper
names are shown.
I didn't update the song numbers to include the newly-allowed songs
because otherwise it'd no longer correlate with what song numbers you
use for the music() simplified command.
This is basically just bolting on the "frames" part of a time trial
score. There's not enough space to properly show it on the time trial
select screen, maybe we can figure something out later. But I at least
want to implement the functionality now.
This doesn't make the editor completely accessible on controller, but
it's a good start at least. VCE already let you move between rooms with
the D-Pad, though.
These functions will only complain once if they receive an out-of-bounds
tile. And it's only once because these functions are called frequently
in rendering code.
A macro WHINE_ONCE() has been added in order to not duplicate code.
Disabling the one-way recolor if assets are mounted is needed to make
existing levels not look bad, but what about levels that want to use the
recolor anyway?
The best solution here is to just introduce another bool into the XML,
and make the re-color opt-in and only present if assets are mounted if
that tag is present.
Some levels (like Unshackled) have decided to manually re-color the
one-way tiles on their own, and us overriding their re-color is not
something they would want. This does mean custom levels with custom
assets don't get to take advantage of the re-color, but it's the exact
same behavior as before, so it shouldn't really matter that much.
I would've liked to specifically detect if a custom tiles.png or
tiles2.png was in play, rather than simply disabling it if any asset was
mounted, but it seems that detecting if a specific file was mounted from
a specific zip isn't really PHYSFS's strong suit.
One-ways have always had this problem where they're always yellow. That
means unless you specifically use yellow, it'll never match the tileset.
The best way to fix this without requiring new graphics or changing
existing ones is to simply re-tint the one-way with the given color of
the room. That way, the black part of the tile is still black, but the
yellow is now some other color.
Ved has this useful feature where you can "lock" a gravity line or warp
line in place, meaning it'll no longer extend its length until it
touches a tile. A line is locked if the p4 of the edentity is 1.
VVVVVV doesn't support this, but now it does. The horrifying thing is
that it stretches the lines out *while rendering the line*, so it looks
like logic and rendering aren't that separate after all (although, I
already learned that when I did my over-30-FPS patch).
This change was half-backported from the localization branch, except I
just came up with "scaling mode" as a better term than the more generic
"graphics mode". It doesn't make sense to still have the option be
called "toggle letterbox" because a third option (integer mode) was
added at some point.
The options for fullscreen and scaling mode were at the top, then there
were various other graphical options, and then the option to resize to
the nearest window size that is of an integer multiple was all the way
below that. Now that last option is moved to be right below the other
options related to window sizing.
VVVVVV's menus are kind of packed to the brim, so I thought it was time
to recategorize the menus a little bit. There's now a new "advanced
options" menu which holds the following options which were moved out of
graphic options, game options and especially accessibility options:
- toggle mouse
- unfocus pause
- fake load screen
- room name background
- glitchrunner mode
I also made the positioning of the titles and descriptions more
consistent, and made some options which were moved to the new menu not
so abbreviated ("load screen" and "room name bg")
For whatever reason, not all arguments of createentity() are exposed in
the command.
We have to keep in mind that (1) unspecified arguments default to 0
(instead of the 320 and 240 for argument 8 and 9 that createentity()
usually defaults to), and that (2) arguments persist across commands.
(Why not get rid of argument persistence, you say? Unfortunately, some
levels rely on argument persistence to call gotoposition() without
specifying the third argument, even though you're supposed to specify
all three arguments.)
To add these arguments without breaking levels, I re-added the
createentity() defaults of 320 and 240 for args 8 and 9, and then I
reset the new arguments afterwards when I'm done. Technically this could
be bad if other commands used those higher arguments, but none of them
really do. (Except createcrewman(), but it only sets argument 6 to 0
sometimes anyway, but argument 6 is already supposed to default to 0.)
The game for some reason had this thing where it would not draw the
diagonal background tiles if you had animated backgrounds turned off.
Which is weird, because spikes with that background are still drawn as
spikes with that background. And also, it doesn't do this for any of the
tower hallway rooms, which is inconsistent.
Better to simplify the logic in Render.cpp anyways by removing
graphics.drawtower_nobackground() and making it really clear what
exactly we'll do if backgrounds are turned off. ("Aren't we already not
drawing the background? What's this _nobackground() function for?")
Flip Mode will now be in the game options menu if either:
(1) You're playing the M&P version.
(2) You have it unlocked and you came here from the in-game pause
screen.
This is because if you're playing M&P, you'd have to close the game,
edit unlock.vvv, and re-launch the game to toggle Flip Mode, since
there's no other way to do so. And if you're playing the full version,
you'd have to save and exit your session in order to toggle Flip Mode.
If you want your game window to simply be exactly 320x240, or 640x480,
or 960x720 etc. then it's really annoying that there's no easy way to do
this (to clarify, this is different from integer mode, which controls
the size of the game INSIDE the window). The easiest way would be having
to close the game, go into unlock.vvv, and edit the window size
manually. VCE has a 1x/2x/3x/4x graphics option to solve this, although
it does not account for actual monitor size (those 1x/2x/3x/4x modes are
all you get, whether or not you have a monitor too small for some of
them or too big for any of them to be what you want).
I discussed this with flibit, and he said that VCE's approach (if it
accounted for monitor size) wouldn't work on high-retina displays or
high DPIs, because getting the actual multiplier to account for those
monitors is kind of a pain. So the next best thing would be to add an
option that resizes to the nearest perfect multiple of 320x240. That way
you could simply resize the window and let the game correct any
imperfect dimensions automatically.
The Alt+Enter Glitch is a funny glitch where if you press any toggle
fullscreen keybind during a cutscene, Viridian will stop moving (if
they're being moved by a walk()) and ACTION will start being held down
for them. Meaning in most cases you can interrupt a walk and flip at the
same time.
This can obviously break cutscenes if a casual just wants to toggle
fullscreen, so I'm fixing it. But it will be unfixed in glitchrunner
mode in case you want to glitch out custom levels (I know I do).
More information on the Alt+Enter Glitch is available here:
https://gitgud.io/infoteddy/vvvvvv-knowledge/blob/master/bugs/bugs.md#the-altenter-glitch
(The page is a bit outdated, some bugs have been fixed in 2.3 already.)
It's sometimes unwanted by people, and it's unwanted enough that there
exist instructions to hexedit the binary to remove it (
https://distractionware.com/forum/index.php?topic=3247.0 ).
Fun fact, the unfocus pause didn't exist in 2.0.
There were a few problems with the old way of doing things:
(1) Level stats were an ad-hoc object. Basically, it's an object whose
attributes are stored in separate arrays, instead of being an actual
object with its attributes stored in one array.
(2) Level filenames with pipes in them could cause trouble. This is
because the filename attribute array was stored in the XML by being
separated by pipes.
(3) There was an arbitrary limit of only having 200 level stats, for
whatever reason.
To remedy this issue, I've made a new struct named CustomLevelStat that
is a proper object. The separate attribute arrays have been replaced
with a proper vector, which also doesn't have a size limit.
For compatibility with versions 2.2 and below, I've kept being able to
read the old format. This only happens if the new format doesn't exist.
However, I also WRITE the old format as well, in case you want to go
back to version 2.2 or below for whatever reason. It's slightly
wasteful to have both, but that way there's no risk of breaking
compatibility.
Centiseconds won't be saved to any save file or anything. This is just
to make speedrunning a bit more competitive, being able to know the
precise time of a time trial or full game run.
The time trial par time on the result screen always has ".99" after it.
This is basically due to the game comparing the number of seconds to the
par number of seconds using less-than-or-equal-to instead of simply
less-than.
The only reason why gray Warp Zone entities were green originally was
because there is a giant concatenated list of tileset+tilecol
combinations, and by using tileset 3 tilecol 6 you're using the entry
of tileset 4 tilecol 0, which is the green Ship tileset.
So without interfering with the green Ship tileset's entry, I've decided
that the best thing to do is to just add special cases. The enemy color
was easy enough to fix. The platform color was also easy to fix.
However, there exist no existing textures for gray conveyors, so at that
point I decided to just tint the existing green one gray, and then I did
the same for platforms.
This patch is very kludge-y, but at least it fixes a semi-noticeable
visual issue in custom levels that use internal scripts to spawn
entities when loading a room.
Basically, the problem here is that when the game checks for script
boxes and sets newscript, newscript has already been processed for that
frame, and when the game does load a script, script.run() has already
been processed for that frame.
That issue can be fixed, but it turns out that due to my over-30-FPS
game loop changes, there's now ANOTHER visible frame of delay between
room load and entity creation, because the render function gets called
in between the script being loaded at the end of gamelogic() and the
script actually getting run.
So... I have to temporary move script.run() to the end of gamelogic()
(in map.twoframedelayfix()), and make sure it doesn't get run next
frame, because double-evaluations are bad. To do that, I have to
introduce the kludge variable script.dontrunnextframe, which does
exactly as it says.
And with all that work, the two-frame (now three-frame) delay is fixed.
It's annoying for casuals to have to close the game if they manage to
get themselves to turn into VVVVVV-Man, but it's amusing enough to
glitchrunners that they mess about with VVVVVV-Man in the main game,
clipping through walls everywhere (well, they call it Big Viridian, but
still).
Ironically enough, resetting more variables in script.hardreset() makes
the glitchy fadeout system even more glitchy. Resetting map.towermode,
for example, makes it so that if you're in towers when you quit to the
menu, script.hardreset() makes it so that the game thinks you're no
longer inbounds (because it no longer thinks you're in a tower and thus
considers coordinates in the space of 40x30 tiles to be inbounds instead
of 40x700 or 40x100 tiles to be inbounds), calls map.gotoroom(), which
resets the gamestate to 0. So if we're using the old system, it's better
to reset only as much as needed.
And furthermore, we shouldn't be relying on script.hardreset() to
initialize variables for us. That should be done at the class
constructor level. So I've gone ahead and initialized the variables in
class constructors, too.
This was fixed in 2.3 because one of the side effects of this janky
system was being able to accidentally immediately quit to the title if
the screen was black during a cutscene, which is something very likely
to happen to casual players.
Anyway, credits warp uses this gamestate-based system because it
utilizes quitting to the title screen doing gamestate 80. From there,
you increment the gamestate to gamestate 94 to use the Space Station 2
expo script.
This is the second part of what is necessary for credits warp to work.
The speedrunners call this "text storage". You need to get the
advancetext prompt up without a text box in order to be able to
increment the gamestate without bound. In 2.0, script.hardreset() reset
the text boxes, but not the prompt.
This is the first part of what is necessary for credits warp to work.
If the "- Press ACTION to advance text -" prompt is up, and you manage
to keep it up, then you can indefinitely increment the gamestate by
pressing ACTION.
This is first used in credits warp to teleport to the start of Space
Station 2 (by utilizing the Eurogame expo script, triggered by a
gamestate), and then again later by using a teleporter that has a high
gamestate number to increment to the [C[C[C[C[Captain!] cutscene.
Glitchrunner mode is intended to re-enable glitches that existed in
older versions of VVVVVV. These glitches were removed because they could
legitimately affect a casual player's experience. Glitches like various
R-pressing screwery, Space Station 1 skip, telejumping, Gravitron
out-of-bounds, etc. will not be patched.
It should've checked the final spacing and not the intermediate maximum
value. I had changed some things around, and now the minimum spacing
was 5 instead of 0 by mistake.
All menus had a hardcoded X position (offset to an arbitrary starting
point of 110) and a hardcoded horizontal spacing for the "staircasing"
(mostly 30 pixels, but for some specific menus hardcoded to 15, 20 or
something else). Not all menus were centered, and seem to have been
manually made narrower (with lower horizontal spacing) whenever text
ran offscreen during development.
This system may already be hard to work with in an English-only menu
system, since you may need to adjust horizontal spacing or positioning
when adding an option. The main reason I made this change is that it's
even less optimal when menu options have to be translated, since
maximum string lengths are hard to determine, and it's easy to have
menu options running offscreen, especially when not all menus are
checked for all languages and when options could be added in the middle
of a menu after translations of that menu are already checked.
Now, menus are automatically centered based on their options, and they
are automatically made narrower if they won't fit with the default
horizontal spacing of 30 pixels (with some padding). The game.menuxoff
variable for the menu X position is now also offset to 0 instead of 110
The _default_ horizontal spacing can be changed on a per-menu basis,
and most menus (not all) which already had a narrower spacing set,
retain that as a maximum spacing, simply because they looked odd with
30 pixels of spacing (especially the main menu). They will be made even
narrower automatically if needed. In the most extreme case, the spacing
can go down to 0 and options will be displayed right below each other.
This isn't in the usual style of the game, but at least we did the best
we could to prevent options running offscreen.
The only exception to automatic menu centering and narrowing is the
list of player levels, because it's a special case and existing
behavior would be better than automatic centering there.
The tilesheets in question are font.png, tiles.png, tiles2.png,
tiles3.png, entcolours.png, teleporter.png, sprites.png, and
flipsprites.png.
This patch removes the hardcoded dimensions when scanning the
tilesheets, because it's simpler that way. It also de-duplicates it so
it isn't a bunch of copy-paste, by using macros. (I had to use macros
because it was the easiest way to optionally pass in some extra code in
the innermost for-loop.)
Also, if the dimensions of a scanned tilesheet aren't exactly multiples
of the dimensions of the tile unit for that given tilesheet (e.g. if the
dimensions of a scanned tiles.png are not exact multiples of 8), then an
SDL_SimpleMessageBox will show up with the error message, a puts() of
the error message will be called, and the program will exit.
It seems like they were unfinished. This commit makes them properly
work.
When a track is stopped with stopmusic() or musicfadeout(),
resumemusic() will resume from where the track stopped. musicfadein()
does the same but does it with a gradual fade instead of suddenly
playing it at full volume.
I changed several interfaces around for this. First, setting currentsong
to -1 when music is stopped is handled in the hook callback that gets
called by SDL_mixer whenever the music stops. Otherwise, it'd be
problematic if currentsong was set to -1 when the song starts fading out
instead of when the song actually ends.
Also, music.play() has a few optional arguments now, to reduce the
copying-and-pasting of music code.
Lastly, we have to roll our own tracker of music length by using
SDL_GetPerformanceCounter(), because there's no way to get the music
position if a song fades out. (We could implicitly keep the music
position if we abruptly stopped the song using Mix_PauseMusic(), and
resume it using Mix_ResumeMusic(), but ignoring the fact that those two
functions are also used on the unfocus-pause (which, as it turns out, is
basically a non-issue because the unfocus-pause can use some other
functions), there's no equivalent for fading out, i.e. there's no
"fade out and pause when it fully fades out" function in SDL_mixer.) And
then we have to account for the unfocus-pause in our manual tracker.
Other than that, these commands are now fully functional.
This fixes a corner case where using gamestate 82 from the editor would
put you in a softlock because it would return to the editor settings
menu, which only functions in EDITORMODE and results in a softlock in
TITLEMODE.
This is already done for invincibility. It's kind of unnecessary, but
it's just to make sure if for some reason in the future variables like
insecretlab/intimetrial/nodeathmode don't get reset when exiting to the
menu.
To fix this annoying flicker (which, btw, took me WAY too long to do), I
had to introduce yet another kludge variable to signal that the
horizontal/vertical warp background should be re-initialized on the
pause screen.
I think I could technically keep the 'graphics.backgrounddrawn = false;'
in maplogic() and remove the 'graphics.backgrounddrawn = false;' in
Game::returntopausemenu(), but I'm keeping that other one around because
it doesn't hurt and just as a general precaution and safety measure.
This makes it so the tower background doesn't persist and scroll upwards
if you exit the menu in a warp zone horizontal or vertical room.
Ugh, and while we're on the subject of separating the in-game tower
background and the menu tower background, could we PLEASE separate the
horizontal / vertical warp backgrounds from the tower backgrounds, too?!
Another thing that's annoyed me a lot is being unable to simply press
Esc to close the pause menu. You'd have to hover over the "return to
game" or "keep playing" option. This would be even more annoying with
more options on the menu, so allowing to press Esc is a nice
quality-of-life thing.
Otherwise you could keep re-pressing ACTION on the "yes" option and keep
stalling it until it finally faded out, or quickly go back past menu
options or something.
Otherwise the menu background would have this rendering glitch where the
bypos of the in-game tower wouldn't divide easily and have a bunch of
jitters in an otherwise smooth but overall still somewhat smooth
background.
Also set map.tdrawback to true when leaving the menu.
This is to fix the interpolated color of the tower background
persisting, as well as making sure the menu background doesn't persist
when exiting.
This would be fine, under the assumption that you could never reach the
menu from outside the menu. Well, now you can, so now this has to play
the correct song instead of track 6.
This is to pre-emptively prevent piling up stack frames for what I'll be
adding next, which is pressing Esc in the options menu in-game
automatically moving you back to MAPMODE.
Since the exact same tower background is also used on the menu, we need
to save the current state of the background when entering the menu
(before overwriting it), and then put it back when we're done. Maybe we
ought to separate the in-game and menu tower backgrounds...
This also fixes a semi-hilarious bug where you could make Panic Room go
in the other direction by simply going to the options menu in-game.
This is accomplished by adding convenience functions
mapclass::bg_to_kludge() and mapclass::kludge_to_bg().
Well this is a bit annoying. I can call graphics.updatetowerbackground()
just fine, but I have to get at the title color update routine inside
titlelogic(), which is hard-baked in. So I have to pull that code
outside of the function, export it in the header, and then call it when
I transition to TITLEMODE.
So now the options do what they do. However, I still need to fix the
1-frame glitch when switching to TITLEMODE, as well as make returning
from the menu return back to MAPMODE, as well as making this better menu
integrate seamlessly with the existing menus.
This prevents from having to repeat 'if (game.menupage == ...)'
everywhere, which makes for more concise code.
I know you're technically supposed to indent the cases surrounded by
if-guards, but I don't think indenting them here would help anything.
I'd only indent it if the 'if' had an 'else', for example. But if it
surrounds the whole case, then there's no need for indentation.
Similar to Graphics::map_tab(), this ensures that I don't have to
copy-paste printing the map options for every single game.menupage case
I want, and in this case that's a good thing because there'll be 4
game.menupage cases I'll be using.
This basically adds an extra '|| game.inintermission' because it seems
like the original code forgot about that conditional. You can't save in
level replays, so there's no need to say "You will lose any unsaved
progress." in intermission replays.
In my previous PR, I wrongly assumed that I could just replace the `i`
handling code of those options with an `i++;` at the beginning, and thus
I could put all blocks' `i++;` into ARG_INNER(). Well I was wrong,
because the code was written the original way for a reason, namely that
we still need `i` to point to the -playx/y/rx/ry/gc/music argv so we can
re-compare which argument led us into this code block.
Any decent compiler will optimize this so that it's still only two
function calls (or it gets inlined). However, it's still not very
readable, so I've assigned the result to a variable and used that
instead.
Instead of copy-pasting everything and changing a few parts, just have
something that handles that tiny part. This reduces the amount of code
size the custom level CREW page takes up by half.
This will be used to keep some text positions the same when in Flip
Mode, instead of having to copy and paste code.
This function being at the very top of the file kind of violates
locality, but it has to be done because it can't be a macro.
Previously, the code to print all tab names was copied to every single
tab, resulting in 12 more superfluous print statements than needed. This
commit uses graphics.map_tab to de-duplicate all the code.
This function is useful to de-duplicate all the map page names at the
bottom, which are MAP, CREW/SHIP/GRAV, STATS, and SAVE. If selected, it
will surround the text in square brackets and automatically handle the
positioning.
Shamelessly copy-pasted from Dav999's localization branch.
Just to be helpful if someone has a failing FILESYSTEM_init(), but
doesn't know that's their issue and keeps wondering why VVVVVV just
exits with code 1.
The command-line argument parsing code has a lot of copy-paste. This
copy-paste would get even worse if I added safety checks to make sure
you couldn't index argv out-of-bounds by having an argument like
`-renderer` without having anything after it, i.e. you'd be doing the
command `./VVVVVV -renderer`.
Previously, only the playtest arguments (apart from the recently-added
`playassets`) had this safety check, but the message it printed whenever
the safety check failed was always "-playing option requires one
argument" regardless of whatever argument actually failed to be parsed.
So I fixed it so that all arguments actually output the correct
corresponding failed argument instead.
Also, `strcmp(argv[i], <name>) == 0` is really kind of noisy, even if
you understand what it does perfectly well.
So I refactored it with a bunch of macros. ARG() just does the strcmp()
char* comparison, and ARG_INNER() does the safety check and returns 1,
along with printing a message, if the safety check fails.
This is used if you're loading a level file from STDIN. The game needs
to know the actual level assets directory you're referring to, since
when it gets the level from STDIN, it doesn't know the actual filename
of the level.
Fixes#309.
The assets mounting code was put directly in editorclass::load(), but
now it's in a neat little function so it can be called from multiple
places without having to call editorclass::load().
This ensures that endsWith() can be used outside of editor.cpp.
When leo60228 originally wrote endsWith(), it was static, but I asked
him on Discord just now and he more-or-less confirmed that it's fine if
it's not static. If it was static, it would be confined to
UtilityClass.cpp now instead!
Ugh, this is terrible and stupid and I hate myself for it.
Anyway, since the SDL2 VSync hint only applies when the renderer is
created, we have to re-create the renderer whenever VSync is toggled.
However, this also means we need to re-create m_screenTexture as well,
AND call ResizeScreen() after that or else the letterbox/integer modes
won't be applied.
Unfortunately, this means that in main(), gameScreen.init() will create
a renderer only to be destroyed later by graphics.processVsync().
There's not much we can do about this. Fixing this would require putting
graphics.processVsync() before gameScreen.init(). However, in order to
know whether the user has VSync set, we would have to call
game.loadstats() first, but wait, we can't, because game.loadstats()
mutates gameScreen! Gahhhhhh!!!!
@leo60228 suggested to fix that problem (
https://github.com/TerryCavanagh/VVVVVV/pull/220#issuecomment-624217939
) by adding NULL checks to game.loadstats() and then calling it twice,
but then you're trading wastefully creating a renderer only to be
destroyed, for wastefully opening and parsing unlock.vvv twice instead
of once. In either case, you're doing something twice and wasting work.
Otherwise a NO_CUSTOM_LEVELS build would fail. Also I got rid of the
'graphics.flipmode = false;' in the fixed loop because I don't think it
does anything.
This is needed for the next step. I want to put all the loop stuff in
their own functions so the code isn't one huge blob, but to do that I'll
need to make 'time' a global variable, but I can't do that because
actually 'time' is already a function, apparently, and you're only
allowed to shadow variables when already inside a function.
Like actual entities, editor ghost colors were updating every render
frame instead of logic frame. So just like actual entities, I added a
realcol attribute to them that editorrender() uses instead, and added
code to update said realcol attribute in editorlogic(). That way the
colors don't go by too quickly (especially the death color).
Just like all the other fixes, the variable that controls the amount of
ghosts to show was being updated every render frame instead of every
logic frame.
This is because due to the game loop changes in this over-30-FPS patch,
editorrender() can be called and undo graphics.backgrounddrawn being set
to false once again. Solution here is to make it so it keeps being set
to false until game.shouldreturntoeditor is turned off, which has also
been moved to editorlogic().
This is to make sure no lerping occurs in 30-FPS mode, otherwise things
might look weird. A good case that this fixes is how entities look in a
double-gotoroom (they should be completely frozen in 30-FPS mode).
There is now an option in "graphic options" named "toggle fps", which
toggles whether the game visually runs at 1000/34 FPS or over 1000/34
FPS. It is off by default.
I've had to put the entire game loop in yet another set of braces, I'll
indent it next commit.
What happens here is that the entity gets created and then gets
immediately updated on the next frame, but there's no time for their
walkingframe of 0 to be rendered, so it'll look like they have just
started with walkingframe 1. However in the delta-timestep rendering
it'll render with walkingframe 0. So we need to fix their drawframe and
increment it when creating them.
Looks like mapclass::changefinalcol() is called whenever you enter a
room in Outside Dimension VVVVVV.
mapclass::changefinalcol() changes the tile, but it doesn't update their
drawframe. So after that function is called, update their drawframe.
If you update their drawframe while inside that function, then when the
platform actually cycles color it'll cycle backwards quickly sometimes,
which is not ideal.
When I loaded the room where Vitellary is in Space Station 2, I saw this
1-frame glitch happen despite my previous efforts to prevent it. So now
it's fixed.
This is because otherwise, on my Linux system at least, the game will
take up a lot of CPU that it doesn't really need to (I only have a 60hz
monitor).
On Windows, it looks like Windows already enforces V-sync for
applications anyway, unless they have exclusive fullscreen control.
Linux doesn't enforce V-sync on apps and lets them take up as much CPU
as they want, so I'm putting this here to limit the framerate.
The game is already actually 30 FPS anyway, the nice smooth FPS is just
visual. V-sync won't introduce any more "input lag" than already exists.
By "hidden names", I'm referring to "Dimension VVVVVV" and "The Ship"
popping up on the quit/pause/teleporter screens, even though those rooms
don't have any roomnames.
Apparently my commit to fix roomname re-draw bleed on the
quit/pause/teleporter screens exposed yet another hardreset()-caused
bug. The issue here is that since hardreset() sets game.roomx and
game.roomy to 0, map.area() will no longer work properly, and since the
hidden roomname check is based on map.area(), it will no longer display
"Dimension VVVVVV" or "The Ship" once you press ACTION to quit. It used
to do this due to the re-draw bleed, but now it doesn't.
I saw that roomnames didn't get reset in hardreset(), so the solution
here is to re-factor hidden names to be an actual variable, instead of
being implicit. map.hiddenname is a variable that's set in
mapclass::loadlevel(), and if isn't empty, it will be drawn on the
quit/pause/teleporter screens. That way it will still display "Dimension
VVVVVV" and "The Ship" when you press ACTION to quit to the menu.
EDIT: Since PR #230 got merged, this commit is no longer strictly
necessary, but it's still good to refactor hidden names like this.
As much as it looks cool to have a slowly-scrolling background on the
title screen, it's quite annoying that slowmode applying on the title
screen mean that your keypresses are less responsive.
This adds Graphics::crewcolourreal(), which is like the
entityclass::crewcolour() that the editor already uses, except for the
real color instead of the color ID. Also, editorclass now has an
attribute `entcolreal` so enemy colors don't update more than 30 frames
a second.
The solution is to draw another row of incoming textures. And also just
draw another row of textures when the background needs to be redrawn,
otherwise it'll flicker when the color changes while you're holding down
ACTION.
To fix this, I draw another row/column of incoming textures. But of
course, I have to extend the size of the towerbuffer, otherwise the
incoming textures will just be gone.
This could happen if you held down ACTION in the credits, looks like the
background doesn't keep up for some reason. That's another bug to fix,
but at least I can fix this overdraw.
This is only noticeable if you have a font with translucent pixels, like
I do. But it gets really noticeable really quickly with this over-30-FPS
patch because the render functions are continuously called every
delta-timestep. To prevent this, just fill the backbuffer with black
before rendering anything.
There's still a problem in that the flickering that would lead to this
overdraw in the first place still exists. But at least if it'll flicker,
it'll flicker black and not overdraw.
Currently it interpolates it based on the current state of game.swngame,
but when game.swngame changes the interpolation doesn't know that it has
JUST changed or anything. So add a kludge variable to fix this
off-by-one.
This was especially noticeable in slowmode, where after going to an
adjacent room, it would look like they stopped for a split second. This
commit makes it so they smoothly continue their journey after switching
rooms.
The integer cast is to round off any fractional part of the velocity so
that they don't make a difference and result in the oldxp/oldyp being
one pixel off. Especially since the player's y-velocity fluctuates while
standing unflipped on the floor.
Incidentally enough, this seems to only have been a problem with screen
transitions for some reason. No other uses of gotoroom() (such as the
one where gotoroom() is called every other frame, or every frame) seem
to have resulted in this "pausing" behavior, or at least a reversion
back to 30 FPS movement. I don't know why.
Otherwise it'll go by too quickly.
Also something subtle here - I didn't make it conditional on
game.advancetext, so now it'll still decrement even if you have
advancetext up.
This makes editor notes fade out smoothly. And even though the notedelay
only gets decremented by one every editor-frame (the editor runs at
1000/24 FPS fixed-timestep here), it actually gets multiplied by 4, so a
floating-point interpolated value would make a difference here.
This is because their oldxp wasn't being updated when they move (or
rather, teleport) and wrap around the screen.
These enemies are ZZT centipedes, but they're referred to as ASCII
snakes in comments in the code.
These colors were of the colors of each crewmate, the inactive crewmate
color, and the color of the trinket and clock on the quicksave/summary
screens.
These colors all used fRandom() and so kept updating too quickly because
they would be recalculated every time the delta-timestep render function
got called, which isn't ideal. Thus, I've had to add attributes onto the
Graphics class to store these colors and make sure they're only
recalculated in logic functions instead.
Thankfully, the color used for the sprites on the time trial results
screen doesn't use fRandom(), so I don't have to worry about those.
There's a new version of Graphics::drawsprite() that takes in a pre-made
color already, instead of a color ID. As well, I've also added
Graphics::updatetitlecolours() to update these colors on the title
screen.
Okay, so the problem here is that Graphics::setcol() is called right
before a sprite is drawn in a render function, but render functions are
done in deltatime, meaning that the color of a sprite keeps being
recalculated every time. This only affects sprites that use fRandom()
(the other thing that can dynamically determine a color is help.glow,
but that's only updated in the fixed-timestep loop), but is especially
noticeable for sprites that flash wildly, like the teleporter, trinket,
and elephant.
To fix this, we need to make the color be recalculated only in the
fixed-timestep loop. However, this means that we MUST store the color of
the sprite SOMEWHERE for the delta-timesteps to render it, otherwise the
color calculation will just be lost or something.
So each entity now has a new attribute, `realcol`, which is the actual
raw color used to render the sprite in render functions. This is not to
be confused with their `colour` attribute, which is more akin to a color
"ID" of sorts, but which isn't an actual color.
At the end of gamelogic(), as well as when an entity is first created,
the `colour` is given to Graphics::setcol() and then `realcol` gets set
to the actual color. Then when it comes time to render the entity,
`realcol` gets used instead.
Gravitron squares are a somewhat tricky case where there's technically
TWO colors for it - one is the actual sprite itself and the other is the
indicator. However, usually the indicator and the square aren't both
onscreen at the same time, so we can simply switch the realcol between
the two as needed.
However, we can't use this system for the sprite colors used on the
title and map screen, so we'll have to do something else for those.
In order to make sure colors don't update more than 1000/34 frames per
second, I'll have to move the color-setting part of this function
somewhere else.
Just a small thing, but if you teleported out of a tower with the
top/bottom screen spikes being onscreen (by dying, for example), they
would retract once you went back in to a tower. Small little thing, but
it's a good thing to polish.
Otherwise, the tile animations will go too fast. However, the overall
color cycling hasn't been going fast, since it was never in gamerender()
in the first place.
When you pressed and released ACTION to speed up the credits, the
credits position would end up being 1 frame off from the background.
This is due to the fact that we update the tower background after we
update the credits position, so this commit moves the tower background
update before the credits position update.
These special images are the crewmates, Level Complete, and Game
Complete images. They flashed depending on if you were lucky and
happened to got your delta-timesteps just right when text boxes were
fading in and out.
Honestly, I'm surprised text box fading in/out hasn't ran into this
issue before. It's insane luck that this issue hasn't occurred before or
anything.
Well, anyways, to fix this, there's now an attribute `allowspecial` on
text boxes, and an optional parameter of the same name for
Graphics::createtextbox(). This attribute is the only thing that will
let these special text box images render. And any createtextbox()es that
utilize these special images have been updated accordingly.
By "frame" here I'm referring to the fixed-timestep, not a visual
delta-timestep.
Anyway, the problem is because crewmates' drawframes wait for
entityclass::animateentities() to be called in gamelogic(). In the
old, 30-FPS-only system, this entityclass::animateentities() would be
called in gamerender(), before any actual rendering would take place.
However, I've had to move it out of gamerender() because otherwise
entities would animate too fast. As a result, since gamerender() could
be called in between the entity creation and gamelogic(), a
less-than-1-frame visual glitch could happen.
The solution is to set the entity's drawframe as well when fixing facing
the player in Map.cpp.
Incidentally enough, this de-duplicates the amount of times this code
has been copy-pasted from 4 times to 2.
Anyways, this makes it so the crew don't go lightning fast on the
summary screen, the NDM game-over screen, the NDM win screen, and the
pause screen in the main game. It was slightly hilarious seeing them go
really quickly, actually. It was like they were running away from a
giant monster or something.
Just to make sure it's extra smooth. Not that it will be noticeable, and
you can't access the Secret Lab in slowmode without modifying the game,
but it's nice to have this.
Otherwise it'll go by really fast and rapidly pulsate. To the point
where it seems like it would be an epilepsy trigger, although I
wouldn't know anything about epilepsy other than that it's bad.
Ok, now THIS takes the cake for "only really noticeable in slowmode",
because it only ever moves at 1 pixel per second. And even then,
slowmode shouldn't apply on the title screen, so it won't even show up
there once I get around to doing that change.
This is so the background doesn't NYOOOOM past at light speed. Although
for a game set in space like VVVVVV, light speed ain't bad.
And this finally requires that editorlogic() have a call to
Graphics::updatebackground().
To make it real smooth, just in case it was noticeable that it only
updated at 1000/34 FPS before (well, except in slowmode, it's really
noticeable THERE).
Also this removes the re-typing out of (game.act_fade/10.0f) for every
single R, G, and B in gamerender().
This makes text boxes fade in and out pretty smoothly.
This requires that the textboxclass::setcol() be in Graphics::drawgui(),
so now it's moved there.
Text box fading is only really noticeable if you're playing in slowmode.
This has to be done in order to fix rendering when on a conveyor or
moving platform and actively moving with or against it. Pretty sure this
shouldn't break anything, oldxp/oldyp is mostly visual after all (and by
the time it's used for gravity line collision checking,
updateentitylogic() would've already gotten around to it anyway).
Incidentally, this also fixes a jitter that would occur if you were
moving at the time you died or collected a trinket or custom crewmate,
due to the game temporarily freezing and either doing deathsequence or
completestop.
Now it's really, really smooth. Except for like the last frame when it
goes down, which I sometimes didn't notice (but maybe it didn't happen
every time due to being lucky on the delta timesteps or something,
whatevs.)
Since "if (graphics.resumegamemode)" and "if (menuoffset > 0)" both do
the same thing, they've been combined with an "or" conjunction.
As well, the map.extrarow check in maplogic() has been refactored to use
a variable instead of duplicating the entire code block. Not that it
matters anyway, because the difference between 240 and 230 is only 10
pixels, far short of the 25 pixel increment that bringing the menu up
and down uses, and both 240 and 230 integer-divided by 25 have the same
non-remainder value of 9.
Otherwise the screen will shake too fast for my liking.
Also I'm planning to add an FPS limiting option later (because right
now, un-capping the FPS is pretty wasteful and eats up lots of
resources, especially since I have only a 60hz monitor), and it'd feel
weird if screen shaking updated every delta timestep.
This fixes entities being drawframe 0 for 1 frame when being first
created. Incidentally, this also fixes entities created during
completestop being the player sprite, too, which is something not many
people notice.
For some reason, it was put near the start of gamerender(), even though
since it handles edge-flipping it seems like it should be in the logic
function already.
This makes sure entity animations don't animate as fast as possible, and
also fixes edge-flipping on normal surfaces.
This prevents undefined behavior because we use oldxp/oldyp to do linear
interpolation.
It's also initialized in entclass::entclass(), just to be sure. And I've
deduplicated the regular xp/yp initialization in createentity(), too.
I've added a function Graphics::lerp() which simply interpolates between
two values given a certain alpha value. It's just like drawing a
straight line between two points.
Also, Graphics now has an `alpha` attribute, and it is set on every
deltatime update to be used in linear interpolation.
Ok, and this is where the fun starts.
In an ideal world, this would be the end of this patch. However, of
course, there are many, MANY places in the game that update
fixed-timestep timers DIRECTLY inside the render function, which is not
ideal because it means those timers go super fast.
I'll have to fix those later.
Ok, NOW indent it. I didn't indent it previously because the diffs are
annoying to read if there's an indent that doesn't otherwise change
anything (and even now it's pretty annoying to read).
Alright, this is the start of the over-30-FPS patch!
First things first, we'll need to make it possible to have a separate
deltatime loop outside of the fixed timestep loop. And for that, we
can't be using SDL_Delay(), as SDL_Delay() (as you might imagine) blocks
the whole program.
Instead we'll be using this thing called an accumulator. It looks at how
long the previous poll took (the raw deltatime), and lets timesteps pass
accordingly.
On a side note, I've had to split the `time` and `timePrev` declaration
each onto their own separate line, otherwise there's undefined behavior
from `time` not being initialized.
I use `accumulator = fmodf(...)` instead of `accumulator -=
timesteplimit` because otherwise it'll fast-forward if it's behind,
which is a jarring thing to see.
Also in preparation for what's going to come down the over-30-FPS road,
I've also added `deltatime` and `alpha`. `deltatime` is going to be used
if the game is in slowdown mode, and `alpha` is going to be used for
linear interpolation of animations.
By the way, what was the main game loop previously (and is now the new
timestep loop) is now in an extra set of curly braces, but I haven't
indented it yet to reduce the noise in this commit.
This prevents being able to "roll over" the amount of minutes to 0 (by
simply waiting for the timer to tick past one hour) and being able to
get a result of 00:13 when your result is really 01:00:13.
By looking only at the minutes, the game would read 01:00:13 as 00:13
instead. So simply add the amount of hours to the time trial result.
This is needed for MinGW when compiling C++98, apparently. I put it in
an if-guard because otherwise there'll be a warning from MY compiler
about redefinitions.
If you exited to the menu normally (i.e. got on a code path that went
through Game::quittomenu()), the menu music wouldn't play. This is
because FILESYSTEM_unmountassets() was put after music.play(6). So the
game would play the custom level's track 6, and then unmount it, which
meant it could no longer play track 6, but there's nothing telling the
game to play track 6 again. So I just changed the frame ordering around.
I also added a comment to make sure anyone reading the code is aware of
the frame order dependency.
If you exited from the editor, custom assets would not be unmounted. But
I made sure to put the FILESYSTEM_unmountassets() before the
music.play(6) because otherwise the menu music wouldn't play.
You could also exit to the menu from a custom level using the
rollcredits() command, so I made sure to put a
FILESYSTEM_unmountassets() when returning to the menu from the credits
as well. I also made sure to put it before the music.playef(18) so
there's no risk of the sound effect not playing properly, or not playing
the non-level-specific one.
I added a comment to both FILESYSTEM_unmountasset()s to make sure anyone
reading the code is aware of the frame order dependency.
This is really awful, but there's not much we can do.
TinyXML-2 no matter what will never stop on newlines, so without
changing the XML parser, this is the best we can do - just remove the
"\n " (that's a linefeed plus exactly 12 spaces) if it
appears at the end of the contents of an edentity tag.
Also a giant comment for good measure.
Looks like duplicate player entities persisting across rooms is a
semi-useful feature used by some levels. Still, though, it's a bit of a
nuisance to have duplicate player entities persisting across game
sessions. And levels can't rely on this persistence anyway, anyone could
just close the game and re-open it to get rid of the duplicate entities
regardless.
If a trinket or crewmate ID is out-of-bounds, it will not be created.
This is not only because the `collect`/`customcollect` check in
entityclass::createentity() would then be out-of-bounds, but also
touching it would also be out-of-bounds, too.
Display trinkets will always be created if the ID is out-of-bounds.
Apparently some people (@AllyTally) have been creating display trinkets
with IDs of -1 in order to get a display trinket that always shows up,
which is rather horrifying. But it makes sense, there's a lot more
nonzero int values than there are the amount of int values that are
zero, so it's fairly likely that the `collect` check will always come up
to be true (nonzero). Also, it's more useful to be able to have a
display trinket that always shows up without having to collect a trinket
beforehand, than it is to have it not be created (because technically by
default, you're already in the world where you don't have it created).
Display trinkets still have their `para` set to their ID, though, and if
they managed to gain an `onentity` of 1, bad things could happen... So
just to be sure, I added INBOUNDS checks to crewmates and trinkets in
entityclass::updateentities() so no UB will happen if you collect a
crewmate/trinket with an out-of-bounds ID. Also, I de-duplicated the
`collect`/`customcollect` setting, too.
The flashy color of the elephant can be hard on people's eyes,
especially if they're the type who want screen effects disabled because
they might have epilepsy. The elephant takes up a good 3/4ths of the
screen, you know. If screen effects are disabled, the elephant will use
color 22, which is a neutral gray.
I'm only adding this because the VVVVVV speedrun mods (@tzann, @mohoc)
invalidate all runs that have the elephant texture removed, even though
many people would be looking at a potentially epilepsy-inducing image
many times a day grinding 100% speedruns. (Imo, their justification for
this is flimsy at best.)
The only class that actually needs its i/j/k kept is scriptclass,
because some custom levels rely on it for creating custom activity
zones. So I haven't touched that.
Other than that, there's no chance that anything important relies on
i/j/k in any other class. For that to be the case, it would have to use
i/j/k without initializing it beforehand, and that can simply be
detected by removing the attribute from the header file and seeing where
the compiler complains. And the compiler complains only about cases
where it's initialized first. (Note that due to this check, I *haven't*
removed Graphics's `m` as it precisely does exactly this, using it
without initializing it first.)
Interestingly enough, otherlevelclass and towerclass have unused i/k
variables for whatever reason.
This prevents the game from being saved if you manage to trigger a
savetele() during a "special" gamemode (like if you use the Gravitron
out-of-bounds glitch when replaying Intermission 2, then go to Game
Complete that way).
If you don't have a font.txt, it could happen that a font index is
requested that's out-of-bounds. And that would result in a segfault. So
to fix that I'm adding INBOUNDS checks to all functions that index the
fontmap.
This fixes indexing out-of-bounds in the functions that draw all the
special images such as the elephant and teleporters. Let's make sure the
game doesn't segfault.
I tracked down all the functions that took in an entity's drawframe and
made sure that no matter what value an entity's drawframe was, the game
would never segfault.
To deal with using a different image file for Flip Mode, it looks like
copy-paste was used. This isn't exactly maintainable code. So I'm
replacing it with a reference that changes depending on if the game is
in Flip Mode or not, instead.
Removing the player entity has all sorts of nasty effects, such as
softlocking the game because many inputs require there to be a player
present, such as opening the quit menu.
The most infamous glitch to remove the player entity is the Gravitron
Fling, where the game doesn't see a gravity line at a specific
y-position in the current room, and when it moves the bottom gravity
line it moves the player instead. When the gravity line gets outside the
room, it gets destroyed, so if the player gets dragged outside the room,
they get destroyed, too. (Don't misinterpret this as saying anytime the
player gets dragged outside the room, they get destroyed - it's only the
Gravitron logic that destroys them.)
Also, there are many places in the code that use entity-getting
functions that have a fallback value of 0. If it was possible to remove
the player, then it's possible for this fallback value of 0 to index
obj.entities out-of-bounds, which is not good.
To fix this, entityclass::removeentity() is now a bool that signifies if
the entity was successfully removed or not. If the entity given is the
player (meaning it first checks if it's rule 0, just so in 99% of cases
it'll short-circuit and won't do the next check, which is if
entityclass::getplayer() says the indice to be removed is the player),
then it'll refuse to remove the entity, and return false.
This is a change in behavior where callers might expect
entityclass::removeentity() to always succeed, so I changed the
removeentity_iter() macro to only decrement if removing the entity
succeeded. I also changed entityclass::updateentities() from
'removeentity(i); return true;' to 'return removeentity(i);'.
Apparently it results in Undefined Behavior if the argument given isn't
representable as an unsigned char. This means that (potentially) plain
char and signed chars could be unsafe to use as well.
It's rare that this could happen in practice, though. std::isdigit() is
only used by is_positive_num() which is only used by find_tag(), so
someone would have to deliberately put something crazy after an `&#` in
a custom level file in order for this to happen. Still, better to be
safe than sorry and all.
This fixes a compile error that could happen where the compiler doesn't
know what std::isdigit() is, but I'm puzzled as to why this wasn't
happening earlier, 'cause I've only been reported that it happens by
only one person.
Continuing from #280, another potential source of out-of-bounds indexing
(and thus, Undefined Behavior badness) comes from script commands. A
majority of them don't do any input validation at all, which means the
potential for out-of-bounds indexing and segfaulting in custom levels.
So it's always good to add bounds checks to them.
Interesting note, the only existing command that has bounds checks is
the flag() command. That means you can't turn out-of-bounds flags on or
off. But there's no bounds checks for ifflag(), or customifflag(), which
means you CAN index out-of-bounds with those commands! That's a bit bad
to do, so.
Also, I decided to add the bounds checks for playef() at the
musicclass::playef() level, instead of just the level of the playef()
command. I don't know of any other cases outside of the command where
musicclass::playef() will index out of bounds, but musicclass is the one
containing the indexed vector anyway, I wanted to cover more cases, and
it's better to be safe than sorry.
And this the function with the least amount of cases where its sentinel
value is used unchecked. Thankfully. obj.getplayer() was a bit of a slug
to get through.
obj.getplayer() can return -1, which can cause out-of-bounds indexing of
obj.entities, which is really bad. This was by far the most changes, as
obj.getplayer() is the most used entity-getting function that returns
-1, as well as the most-used function whose sentinel value goes
unchecked.
To deal with the usage of obj.getplayer() in mapclass::warpto(), I just
added general bounds checks inside that function instead of changing all
the callers.
A few months ago, I added ghosts to the VVVVVV: Community Edition editor. I was told recently I should think
about upstreaming it, and with Terry saying go ahead I finally ported them into VVVVVV. There's one slight
difference however--you can choose whether you have them or not in the editor's settings menu. They're off by
default, and this is saved to the save file.
Anyway, when you're playtesting, the game saves the players position, color, room coordinates and sprite every 3
frames. The max is 100, where if it tries to add more, the oldest one gets removed.
When you exit playtesting, the saved positions appear one at a time, and you can use the Z key to speed it up.
[Here's a video of them in action.](https://o.lol-sa.me/4H21zCv.mp4)
2.2 and earlier had this god-awful thing where it put the closing tag of
an edentity onto the next line, and then kept the indentation the same.
This requires parsing the XML in an extremely specific way (i.e.
ignoring the whitespace) so the newline and indentation isn't taken as
part of the actual contents of the tag.
2.3 removed this awful whitespace entirely to make it easier on parsers.
When I tested #270, I tested against a 2.3 re-save of Dimension Open and
diffed the two, because I thought testing against the original version
of the level would result in a bunch of noise I didn't want due to the
whitespace change. Well, I did exactly what I intended, and ended up
ignoring the whitespace change so much that levels saved in this stupid
format ended up getting broken.
Luckily, we can just tell TinyXML-2 to parse a document exactly like how
TinyXML-1 would've parsed it, by supplying the COLLAPSE_WHITESPACE enum
to it (by default it's on PRESERVE_WHITESPACE).
This removes the TinyXML source files, removes it from CMakeLists.txt,
removes all the includes, and removes the functions
FILESYSTEM_saveTiXmlDocument() and FILESYSTEM_loadTiXmlDocument() (use
FILESYSTEM_saveTiXml2Document() and FILESYSTEM_loadTiXml2Document()
instead).
Additionally I've cleaned up the tinyxml2.h include in FileSystemUtils.h
so that it doesn't actually include tinyxml2.h unnecessarily, meaning a
change to TinyXML2 shouldn't rebuild all files that include
FileSystemUtils.h.
Seems a bit wasteful to do the whole "parse the XML document thing"
instead of a simple file check. It doesn't even fail if the XML document
is invalid, but whatever.
Ok, so it was a bit of a struggle at first figuring out the new API, but
honestly it wasn't so bad in the end.
I made a copy of my old unlock.vvv before testing this, and checking
with `diff` the only difference is the new `encoding="UTF-8"` in the XML
declaration, which isn't a bad thing.
Surprisingly, I only had to change some names and stuff around at the
top of the function. The rest of the function could be left untouched
and it worked fine.
Some of the file was indented with two spaces and the rest indented with
tabs. It feels like two different people worked on the file, one more
than the other. Since most of it uses two spaces, I'll just replace the
tabs with two spaces.
This is to respect the fact that the top half of the file is indented
with spaces, while the bottom half is indented with tabs.
Graphics::reloadresources() is on the bottom half.
The previous way manually concatenated the first 7 characters of the
string together (and had an std::min() calculation). The new way instead
does std::string::substr(), which is much more snappy.
The actual unindent is done in a separate commit to minimize noise,
because diffs are terrible at clearly conveying unindents (it should put
all the minus lines together and all the plus lines together, too).
The entirety of the rest of scriptclass::loadcustom() is encased in a
block that first checks if the script with the name even exists. Instead
of indenting the rest of the function, just invert the check and reduce
indentation level.
This commit refactors custom level scripts to no longer be stored in one
giant vector containing not only every single script name, but every
single script's contents as well. More specifically,
scriptclass::customscript has been converted to an std::vector<Script>
scriptclass::customscripts (note the extra S), and a Script is just a
struct with an std::string name and std::vector<std::string> contents.
This is an improvement in both performance and maintainability. The game
no longer has to look through script contents in case they're actually
script names, and then manually extract the script contents from there.
Instead, all it has to do is look for script names only. And the
contents are provided for free. This results in a performance gain.
Also, the old system resulted in lots of boilerplate everywhere anytime
scripts had to be handled or parsed. Now, the boilerplate is only done
when saving or loading a custom level. This makes code quality much,
much better.
To be sure I didn't actually change anything, I tested by first saving
Dimension Open in current 2.3 (because current 2.3 gets rid of the
awful edentity whitespace), and then resaved it on this patch. There is
absolutely no difference between the current-2.3-resave and
this-patch-resave.
This enforces the C++03 standard for people making pull requests who may
not realize their fancy features are too new and shouldn't be used
(cough, cough, @leo60228).
I did some internet searching and this is what I got from this page:
https://crascit.com/2015/03/28/enabling-cxx11-in-cmake/
This resulted in two bugs:
1. Custom assets would not be unmounted when quitting to the menu.
2. Custom assets would be unmounted when playtesting a level.
The solution is to unmount assets in Game::quittomenu() instead.
Main game would retain custom level assets, now fixed. Also, custom fonts load properly. Finally, levels can be stored as a zip and placed in the levels folder, with the .vvvvvv file at the root of the zip and custom asset folders (graphics, sounds etc) also at the root.
Previously, the editor would always say it saved or loaded a level,
even if it was not successful. For example, because a file to load does
not exist, a file to save has illegal characters in its name or the
name is too long to be stored. Now failure is reported. Also, when
quitting the editor and saving before quitting is unsuccessful, the
editor will abort quitting.
I think it's a bit silly to always include the Steam and GOG APIs
whenever we build VVVVVV, since the only time they'll ever be used is in
a live build and not a dev build.
So now Steam and GOG are disabled by default. If you want them, you'll
need to add -DSTEAM=ON or -DGOG=ON respectively at CMake time. They're
also both automatically enabled for release builds.
This commit adds bounds checks to those commands in case say()/reply()
asks for more lines than there are left in the all-script-lines buffer
(not just the current script, so in order for it to segfault your script
has to be last in the all-script-lines vector), and in case text() asks
for more lines than there are in the rest of the rest of the parsed
internal script.
For some reason, scriptclass::loadcustom() sometimes refers to
`customscript` as `script.customscript` instead of `customscript`. The
`script.` is unnecessary.
Although it's not an issue, this should minimize the stack footprint of
calling scriptclass::load(), especially if it goes down to calling
scriptclass::loadcustom() or scriptclass::loadother().
Otherwise, it would end up indexing a vector out-of-bounds, which is UB
and causes a segfault, too. This is used in some constructs like
say(-1)
<internal command>
where the text contents don't matter, only that a text box shows up.
The `speak` command is the exact same as the `speak_active` command,
except without one line of code. So instead of copy-pasting the entire
thing, it's better to just combine them into the same chunk of code.
Instead each line is now held in a const char* array, like it should be.
This results in less work for the compiler, especially with
optimization, since every time the compiler encounters a constant
argument in a function, it has to go off and locate a place to put it.
But if we're upfront and say, hey, here's all the strings we ever need
conveniently packaged into one place, it'll be much more cooperative.
I have the feeling that none of the devs understood what extern did, and
they kind of just sprinkled it everywhere until things started working.
But like all other classes, it should just be one line in the class's
respective header file, and shouldn't be so messy.
When the game loads a room in a custom level, previously it would load
the tilemap of that room into ed.swapmap, and then mapclass::loadlevel()
would manually go through each element in ed.swapmap to set each tile in
`contents`. Why do that, when you can just return the vector from
editorclass::loadlevel() and set it directly? ed.swapmap is really
unnecessary.
It's a bit bad for the compiler if you have lots of function calls with
hardcoded strings in them, because every time the compiler encounters
one, it has to go out of its way to find a dedicated storage location
for the string, which is really inefficient. And it does this
inefficient thing every single time.
There's not much of an impact compiling these lists, but I at least want
to encourage this sort of code style, instead of the push_back(string)
style, in case we ever need a hardcoded array of things later.
Resetting game.activeactivity fixes triggering Undefined Behavior if you
quit to the menu while standing inside an activity zone, and then
re-entered the game. Resetting game.act_fade also fixes the activity
zone prompt fadeout that happens once the above segfault is fixed.
Don't worry, other activity-zone like variables such as teleporter
prompts and trophy text are already covered. obj.trophytext is reset in
scriptclass::hardreset(), too, and game.readytotele is reset every time
mapclass::gotoroom() is called, and mapclass::gotoroom() is called every
time a gamemode is started.
For some reason, the only way to get a cyan crewmate is by cycling
through an already-existing crewmate by keeping left-clicking on it.
This is because when you cycle through crewmate colors, the allowed
colors are 0-5, but when you place down a crewmate, it picks a random
color from 1-5, which seems to be a bit consistent.
So placing and cycling a crewmate now use the same color ranges.
Blackout mode doesn't work properly, because the game doesn't actually
black out the screen, it merely stops drawing things. Oh and only some
things at that, some other things are still drawn. This results in a
freeze-frame effect, which is apparently fixed in the Switch version.
Custom levels utilize this freeze-frame effect, so it's a bit annoying
that the "Game paused" screen draws on top of it and makes it so that
the freeze-frame freezes on "Game paused" until blackout is turned off.
So I'm making it so that "Game paused" doesn't get drawn in blackout
mode. However it will still do graphics.render() because otherwise it'll
just result in a black screen.
This fixes being able to trigger Undefined Behavior by pressing R when
not in-bounds in the Outside Dimension VVVVVV map, usually when you're
falling upwards towards Game Complete.
I also put bounds checks on normal roomdeaths for good measure. You'll
never know when you need it.
Instead of using somewhat-obtuse for-loops to initialize or reset these
vectors, it takes up less lines of code and is clearer if we use
std::vector::resize() and std::vector::clear() instead.
Since translucent roomname backgrounds were introduced in
TerryCavanagh/VVVVVV#122, it exposes one glaring flaw with the game that
until now has been kept hidden: in rooms with room names, the game
cheapens out with the tile data and doesn't have a 30th row, because the
room name would hide the missing row. As a result, rooms with room names
have 29 rows instead of 30 to fill up the entire screen. And it looks
really weird when there's nothing but empty space behind the translucent
room name background.
To remedy this, I added one row to each room with a room name in the level.
First, I had to filter out all the rooms with no room names. However, that's
actually all contained in Otherlevel.cpp, the Overworld, which contains 221
rooms (8 of which are the Secret Lab, 6 more of which are the Ship, so 207 are
the actual Overworld, right? Wrong, 2 of those Overworld no-roomname rooms are
in the Lab, so there are actually 205 Overworld rooms). The remaining level
data files all contain rooms with room names.
But the process wasn't that easy. I noticed a while ago that each room
contains 29 `tmap.push_back()`s, one for each row of the room, and each row is
simply a string containing the 40 tiles for that row, concatenated with
commas.
However, I decided to actually check my intuition by doing a grep on each
level file and counting the number of results, for example `grep 'push_back'
Labclass.cpp | wc -l`. Whatever number comes out should be divisible by 29.
That particular grep on Labclass.cpp returns 1306, which divided by 29 is 45
with a remainder of 1.
So what does that mean? Does that mean there's 45 rooms each, and 1 leftover
row? Well, not exactly. The extra row comes from the fact that Outer Space has
30 rows instead of 29. Outer Space is the room that comes up when the game
finds a room is non-existent, which shouldn't happen with a properly-working
game, except in Outside Dimension VVVVVV. In fact, each level file has their
own Outer Space, and every single Outer Space also has 30 rooms. So really,
this means there are 44 rooms in the Lab and one Outer Space room. (Well, in
reality, there are 46 rooms in the Lab, because 2 of them use the Outside
tileset but have no room names, so they're stored in Otherlevel.cpp instead.)
We find the same result for the Warp Zone. `grep 'push_back' WarpClass.cpp |
wc -l` returns 697, which is 24 remainder 1, meaning 23 rooms of 29 rows and 1
room of 30 rows, which corresponds with 23 rooms in the Warp Zone and one
Outer Space room.
However, Outside Dimension VVVVVV + Tower Hallways and Space Station 1 and 2
are both odd curiosities. Finalclass.cpp contains Outside Dimension VVVVVV,
(which is Intermission 1 and 2 and the Final Level), but also the Tower
Hallway rooms, i.e. the auxiliary Tower rooms that are not a part of the main
tower. Spacestation2.cpp contains both Space Station 1 and 2, so don't be
deceived by the name.
`grep 'push_back' Finalclass.cpp | wc -l` returns 1597, which is actually 55
remainder 2. So... are there two rooms with 30 rows? Yes, in fact, The
Gravitron and Outer Space both contain 30 rows. So there are actually 55 rooms
stored in Finalclass.cpp (not including the minitowers Panic Room and The
Final Challenge), 54 rooms of actual level data and one Outer Space room, and
breaking down the 54 rooms even further, 51 of them are actually in Outside
Dimension VVVVVV and 3 of them are Tower Hallways. Of the 51 Outside Dimension
VVVVVV rooms, 14 of those are Intermission 1, 4 of them are Intermission 2,
and the rest of the 33 rooms are the Final Level (again, not including the
minitowers).
`grep 'push_back' Spacestation2.cpp | wc -l` returns 2148, which is 74
remainder 2. Are there two rooms with 30 rows again? No; one of those counted
2148 rows is a false-positive, because there's an if-else in Prize for the
Reckless that replaces the row with spikes with a row without spikes if you
are in a time trial or in No Death Mode. So there's 73 rooms in Space Station
1 and 2, and one Outer Space room.
With all this in mind, I decided to duplicate the current last row of each
room, the 29th row, to add a 30th row. However, I wasn't going to do this
automatically! But neither was I going to write some kludge-y code to parse
each nightmare of a level file and duplicate the rows that way.
Enter: Vim macros! (Er, well, actually, I use Neovim.) I first did
`/push_back`, so that pressing `n` would keep going to the next `push_back` in
the file. Then I went to the 29th row of the first room in the file, did a
`Yp`, and then started my macro with `qq`. The macro went like this: `30nYp`,
which is simply going to the 29th row of the next room over and duplicating
it. And that's all there was to it. However, I had to make sure that (1) my
cursor was before the `push_back` on the line of the 29th row of the room, and
(2) that I didn't skip rooms, both of which were problems I encountered when
pressing Ctrl+Z a given invocation of the macro (the Ctrl+Z is just a
metaphor, you actually undo by typing `u` in Vim). And also I had to make sure
to be careful around the extra lines of `push_back`s in Prize for the Reckless
and The Gravitron, and make sure I didn't run past the end of the file and
loop back around. Thankfully, all Outer Space rooms are at the end of each
file.
But first, I had to increase the number of rows drawn in Graphics.cpp by 1 in
order to compensate for this, and do the same when reading the tile data in
Map.cpp. I had to change fillcontent(), drawmap(), drawfinalmap(),
drawtowermap(), and drawtowermap_nobackground(). Funnily enough, the tower
functions already used 30 rows, but I guess it's an off-by-one due to the
camera scrolling, so they now draw 31 rows each.
Then, I went in-game to make sure that the row behind each room name looked
fine. I checked EVERY single room with a room name. I turned on invincibility
mode and added a temporary line to hardreset() that always turned on
game.nocutscenes for a smoother playtesting experience. And to make sure that
rooms which have entirely empty bottom rows actually still have 30 rows,
instead of having 29 and the game assuming that the 30th row was empty
(because that sounds like it could lead to Undefined Behavior), I added this
temporary debugging line to the start of mapclass::fillcontent():
printf("(%i,%i) has %i rows\n", game.roomx, game.roomy, (int) tmap.size());
Everywhere I checked - and I made sure to check all rooms - every room had 30
rows and not 29 rows.
Unfortunately, some rooms simply couldn't be left alone with their 29th row
duplicated and had to be manually edited. This was because the 29th row would
contain some edge tiles because the player would be able to walk somewhere on
the 28th, 27th, and 26th rows, and if you duplicated said edge tiles behind
the room name, it would look bad.
Here's a list of rooms whose 30th rows I had to manually edit:
- Comms Relay
- The Yes Men
- Stop and Reflect
- They Call Him Flipper
- Double-slit Experiment
- Square Root
- Brought to you by the letter G
- The Bernoulli Principle
- Purest Unobtainium
- I Smell Ozone
- Conveying a New Idea
- Upstream Downstream
- Give Me A V
- $eeing Dollar $ign$
- Doing Things The Hard Way
- Very Good
- Must I Do Everything For You?
- Now Stay Close To Me...
- ...But Not Too Close
- ...Not as I Do
- Do Try To Keep Up
- Whee Sports
- As you like it
This is actually a strange case where it looked bad because of the 29th
row, instead of the 30th row, and I had to change the 29th row instead of
the 30th row to fix it.
- Maze With No Entrance
- Ascending and Descending
- Mind The Gap
Same strange case as "As you like it" (it's the 29th row I had to change
that was the problem, not the 30th).
- 1950 Silverstone Grand V
- The Villi People
I found that Panic Room and The Final Challenge also looked strange behind the
roomname background, but I can't do much about either because towers' tile
data wrap around at the top and bottom, and if I added another row to either
it would be visible above the room name.
I've considered updating the development editors with these new level tiles,
but I decided against it as the development editors are already pretty
outdated anyway.
This didn't cause any issues on the old push_back(string) system, but it
causes a huge alignment issue now. Don't know why these 7 zeroes are
here, but I'm fixing them.
It's a bit inconsistent how every time you toggle flip mode, it does
this flashing and shaking (and different SFX), regardless of whether or
not you're turning it on or off. To be more consistent with what happens
when you toggle screen effects, only turning on Flip Mode should do the
flashing/shaking/game-saved sound, and turning it off should just play
the Viridian squeak.
It's always personally irked me that the only time you get a Viridian
squeak when pressing ACTION to start fading out and going in-game is
when you start playing a custom level. And that's only if you don't have
a quicksave.
To make things more consistent (and to add more polish to the game), I
made sure there was a music.playef(11) every time game.mainmenu gets
set. I also made sure that this doesn't result in double-squeaking, i.e.
music.playef(11) being called twice, which can be very loud and
ear-hurting.
If you started a new game while having had a save (meaning you selectedd
"new game" while it wasn't in the same position as "continue"), then
saved and quit, your cursor will now end up at "continue" instead of
"new game". (If you didn't save, then your cursor would be out-of-bounds
and end up at position 0 anyway.)
For some reason (probably a copy-paste error), this XML tag gets atoi()
called on it before being assigned to Game::hardestroom. And only when
loading a quicksave, at that.
This would result in Game::hardestroom being set to an empty string,
which if you kept until Game Complete, would end up rendering as a
single null byte (if you even have a font face for said null byte).
I'm not sure how this error compiles in the first place, but whatever.
Whenever I compile with -O2, GCC gives me a warning that the return
value of fread() is being ignored. Which is a fair point, it means that
we're not doing proper error handling if something goes wrong. But I'm
also going to check the return value of fwrite() for good measure.
I believe that checking that this number is not equal to length is the
way to catch all errors and output an error message accordingly. I
didn't use ferror() or feof() mostly because I think it takes up too
much code. Also an error from fwrite() only says "Warning" because I
don't think there's much we can do if we don't fully write all bytes to
the intended file.
Previously, it was used to parse 30 strings whenever loading a room. But
now it's no longer used since we just assign the tilemap to the vector
directly.
They are now stored in const int arrays instead. Except for the Prize
for the Reckless room, which I made sure had its spikes removed in No
Death Mode and the Time Trial.
Instead, they're all stored in a constant int array.
I made sure The Gravitron still has 30 rows just like Outer Space,
though I don't think it matters.
Previously:
- Linux: xdg-open
- Everything else: open
Now:
- macOS and Haiku: open
- Everything else: xdg-open
This is all according to a comment by leo60228 in PR #203.
This change makes it so that in in-editor playtesting, the code to
handle pressing ENTER on activity zones is the same code to handle
pressing ENTER on activity zones in custommodeforreal.
This removes the need to copy-paste code and adapt it to in-editor
playtesting. And thus, this fixes an editor artifact where you can press
ENTER on activity zones while doing the death animation, even though you
can't do that when you're playing custom levels normally.
Since this is at the start of maprender(), the text boxes drawn by this
function will get hidden behind everything else being drawn on top of
it. Thus, it'll only result in a glitchy rendering where the text boxes
at the very top of the screen will be rendered in the roomname space of
the map screen.
To fix this rendering glitch, just remove the drawgui(). It's useless
anyway since it's being drawn behind everything else, so no need to have
it here.
We need to replace an "or" with an "and".
My best guess for this oversight happening was because of the weird
ordering. The code originally did "temp < 30" first and "temp > -30"
second instead of the other way around. With the weird ordering, it
becomes more natural to insert an "or" instead of an "and". So I swapped
around the ordering just for good measure.
This is also fixed in the mobile version.
This fixes horizontal and vertical warp backgrounds not resetting, and
also a bunch of other 1-frame glitches, most noticeably cutscene bars
and fadeouts.
This adds a new variable shouldreturntoeditor to Game to signal whether
or not it should return to editor at the end of the frame.
It's a bit annoying how vvvvvvman status is preserved between in-game
sessions, and the only thing reset is the color. This is annoying
because it means you have to close the game to reset vvvvvvman.
But now it'll be reset properly. I chose to put this reset code in
mapclass::resetplayer() instead of scriptclass::hardreset() because it
seemed like the more appropriate place. It's where all other properties
of the player are reset, after all.
This is to be extra safe and ensure that your hard-earned record isn't
lost at all.
In 2.2, the game didn't save your Super Gravitron record at all. It only
saved it if you closed the game by quitting to the title screen and
pressing ACTION on "quit game". You couldn't press Alt+F4, and you
couldn't press X, you had to do it that way, otherwise your record would
be lost.
In 2.3 right now, the game WILL save your unlock.vvv when you close the
game gracefully by any means, but this still means that if it doesn't
otherwise close gracefully (like, say, a crash), it won't save your
record. It feels like we shouldn't rely on this catch-all saving to save
Super Gravitron records.
Flag 67 seems to be a general-purpose Game Complete flag. It's used to
replace the CREW option with the SHIP option on the pause screen.
Unfortunately, it gets turned on too early during Game Complete. Right
when Viridian starts to teleport, you can bring up the pause screen and
select the SHIP option.
It will teleport you to the ship coordinates, but still keep you in
finalmode, and since the ship coordinates are at 102,111 (finalmode is
only around 46,54), you'll still be stuck in Outside Dimension VVVVVV,
and you've interrupted the Game Complete gamestate by switching to the
teleporting gamestate. Oh, and your checkpoint is set, too, so you can't
even press R. Oh and since there's no teleporter, and checkpoint setting
doesn't check the sentinel value, this results in Undefined Behavior,
too.
So this results in an in-game softlock. The only option you can do is
quit the game at this point.
To fix this issue, just move turning on flag 67 before the savetele() in
gamecompletelogic2().
This makes it so if you bring up the quit screen during a faded-out
screen, you will at least see the screen and won't see black. And also
the fade-in and fade-out animations will still work on the quit screen.
And more importantly, I tested and there's no 1-frame flicker or
anything.
This was used by the old system, which also had an over-reliance on
Terry's State Machine. And due to the fact that it relied on fademode,
it also meant that bringing up the pause screen while faded-out would
result in the player getting sent back to the menu, so one accidental
Esc press during a cutscene could mean countless hours of progress lost
(especially in custom levels).
This would cause the editor to think that it itself is in the middle of
fading to the menu, and so then will fade to the menu, thus losing any
unsaved work without warning.
Having to rely on a script means the fade out wouldn't be self-contained
in MAPMODE, which could cause a small issue where you could die during
the return to the lab. But that issue is now fixed. There's no need to
use the script, and anyway the endcutscene() and untilbars() in said
script don't do anything because there are no cutscene bars in the first
place, so no need to worry about those.
Again, what I've done here is removed the over-reliance on Terry's State
Machine to return to the lab, and just moved it into separate variables
instead. This means that returning to the lab is ALMOST entirely
self-contained in MAPMODE, except there's a quick jaunt over to GAMEMODE
to run a script because you can only run scripts in GAMEMODE.
Alright, so what I've done here is made exiting to the menu entirely
separate from Terry's State Machine, and thus it can now take place
entirely within MAPMODE instead of having to go back to GAMEMODE. Also,
it's faster by 15 frames since we don't need to wait for the map screen
to go back down.
This cleans up a whole lot of kludge variables, because this aggressive
hardreset() right as ACTION is pressed doesn't do anyone any favors.
This aggressive hardreset() was probably here because of the whole fact
that exiting to the menu uses Terry's State Machine, to minimize the
chances of interruption, but it actually causes more issues and allows
towers to interrupt the fadeout. And we should fix the root cause (the
usage of the state machine) instead of patching together some kludge.
I don't want the quit code to only be in the state machine, but I'll
keep the gamestate around for compatibility reasons (there are custom
levels that directly use gamestate 80 to quit to the menu).
Due to the previous commit, these will no longer be regularly taking in
out-of-bounds entity indices. Or at least they shouldn't, so I'm putting
in these print statements here on the off-chance that they do.
Otherwise, this would result in the game updating an entity twice, which
isn't good. This is most noticeable in the Gravitron, where many
Gravitron squares are created and destroyed at a time, and it's
especially noticeable during the part near the end of the Gravitron
where the pattern is two Gravitron squares, one at the top and bottom,
and then two Gravitron squares in the middle afterwards. The timing is
just right such that the top one of the two middle ones would be
misaligned with the bottom one of the two when a Gravitron square gets
outside the screen.
To do this, I changed entityclass::updateentities() into a bool, and
made every single caller check its return value. I only needed to do
this for the ones preceding updateentitylogic() and
entitymapcollision(), but I wanted to play it safe and be defensive, so
I did it for the disappearing platform kludge, as well as the
updateentities() within the updateentities() function.
Apparently, the game just leaves minitowermode on, which can cause
issues if you're in a horizontal warping room (and not any other room
type, due to how frame ordering works). This would manifest itself as a
wrong warp to (20,20) because the game is trying to apply the hardcoded
minitower screen transitions when it shouldn't be.
The main ones to beware of here are entityclass::updateentities(),
entityclass::updateentitylogic(), and entityclass::entitymapcollision().
They would index out-of-bounds and thus commit Undefined Behavior if the
entity was removed in entityclass::updateentities(). And it would've
been fine enough if I only added bounds checks to those functions.
However, I decided to be a bit more defensive and play it safe, and
added bounds checks to ALL functions taking in not only an entity
indice, but also blocks and linecrosskludge indices.
Otherwise, if you died after entering a room with a horizontal or
vertical warp background (but not the all-sides warp background), the
warp background would be the first thing you see when going to the Game
Over screen, and would then start scrolling downwards with the proper
tower background coming in from the top.
This oversight seems to have always been in the game.
Was No Death Mode actually tested? Like, did anyone ever play through
the entire game without dying in the Warp Zone, or even AFTER completing
the Warp Zone, like, ever?
When you complete the game, you're now redirected to the play menu. This
is because your quicksave will have been deleted so you can't go back to
the summary menu.
When you complete a custom level, you'll go back to the levels list, in
case you started the level from a quicksave.
Looks like there wasn't a custommode check for the spawning of crewmates
based on which crewmates were rescued, but now there is.
This has gone undiscovered for a long time, mostly because people don't
use the rescued() internal command.
While I was working on my over-30-FPS patch, I found out that the tower
background in the credits scroll was being completely re-drawn every
single frame, which was a bit wasteful and expensive. It's also harder
to interpolate for my over-30-FPS patch. I'm guessing this constant
re-draw was done because the math to get the surface scroll properly
working is a bit subtle, but I've figured the precise math out!
The first changes of this patch is just removing the unconditional
`map.tdrawback = true;`, and having to set `map.scrolldir` everywhere to
get the credits scrolling in the right direction but make sure the title
screen doesn't start scrolling like a descending tower, too.
After that, the first problem is that it looks like the ACTION press to
speed up the credits scrolling doesn't speed up the background, too. No
problem, just shove a `!game.press_action` check in
`gamecompletelogic()`.
However, this introduces a mini-problem, which is that NOW when you hold
down ACTION, the background appears to be slowly getting out of sync
with the credits text by a one-pixel-per-second difference. This is
actually due to the fact that, as a result of me adding the conditional,
`map.bscroll` is no longer always unconditionally getting set to 1,
while `game.creditposition` IS always unconditionally getting
decremented by 1. And when you hold down ACTION, `game.creditposition`
gets decremented by 6.
Thus, I need to set `map.bscroll` when holding down ACTION to be 7,
which is 6 plus 1.
Then we have another problem, which is that the incoming textures desync
when you press ACTION, and when you release ACTION. They desync by
precisely 6 pixels, which should be a familiar number. I (eventually)
tracked this down to `map.bypos` being updated at the same time
`map.bscroll` is, even though `map.bypos` should be updated a frame
later AFTER updating `map.bscroll`.
So I had to change the `map.bypos` update in `gamecompleteinput()` and
`gamecompletelogic()` to be `map.bypos += map.bscroll;` and then place
it before any `map.bscroll` update, thus ensuring that `map.bscroll`
updates exactly one frame before `map.ypos` does. I had to move the
`map.bypos += map.bscroll;` to be in `gamecompleteinput()`, because
`gamecompleteinput()` comes first before `gamecompletelogic()` in the
`main.cpp` game loop, otherwise the `map.bypos` update won't be delayed
by one frame for when you press ACTION to make it go faster, and thus
cause a desync when you press ACTION.
Oh and then after that, I had to make the descending tower background
draw a THIRD row of incoming tiles, otherwise you could see some black
flickering at the bottom of the screen when you held down ACTION.
All of this took me way too long to figure out, but now the credits
scroll works perfectly while being more optimized.
I had forgotten that the game flashed and did screen-shaking when you
pressed ACTION to quicksave.
While testing for my over-30-FPS patch I stumbled across this.
It's less code being copied and pasted, especially since for my
over-30-FPS patch I would have to make a separate function for each if
both of them were still there, but if they're unified into one then I
will only have to make one more function.
And since map.scrolldir is now used outside of GAMEMODE, we'll need to
reset it in hardreset() and when exiting playtesting.
Due to the previous commit, the descending tower background now has to
account for map.bscroll, or else it will be off by one pixel from the
incoming textures. But ascending tower backgrounds work fine, so no need
to do anything with those.
Looks like this was done as a quick fix instead of taking the time to
figure out the math needed to actually draw the incoming textures, which
is fair enough - it only makes one room, Panic Room, slightly laggier.
While I was working on my over-30-FPS patch, though, I came across the
fact that this background kept getting entirely redrawn every frame, and
it seems like it would be easier to interpolate descending tower
backgrounds if we scrolled what was already there instead.
Here, we have to draw two rows of incoming textures, otherwise the
scrolling surface will produce black lines.
Previously, if you had backgrounds disabled in accessibility options,
and went to the editor and opened up the editor menu, it would be drawn
straight on top of what was already there in the editor instead of being
drawn on top of black. So now it's drawn on top of black.
I want exiting No Death Mode to go back to the "play modes" menu, not to
the "start game" menu, because it's too far back. Also do the same if
you either die or complete No Death Mode.
Also I initialized Game::wasinintermission, probably a good thing to
initialize variables.
During testing, I made a cursed level that set the flash timer to
precisely 1,000,000 frames. It turns out that if I activated the timer
in playtesting, exited playtesting, and exited the editor without ever
re-entering playtesting, the timer still kept going. So to prevent being
able to do that, we should hardreset() when exiting the editor.
In-game because that's where screen effects are used the most. But on
the title screen, screen effects are used when you press ACTION to start
the game, and when you enable screen effects, too.
Otherwise, we don't need screen effects for any other game-gamestate.
This de-duplicates the screen effects rendering code by putting it
inside a function, Graphics::renderwithscreeneffects(), and using that
instead of copy-pasted code.
The code to decrement the timers for flashing and shaking is now handled
outside the game-gamestate case-switch, instead of having to be
duplicated inside each render function.
As a bonus, I made it so the timer decrements even if screen effects are
disabled. This is to prevent any theoretical situation where the timer
can "pile up" due to disabled screen effects not letting it tick down.
This removes a lot of duplicate code, which towerrender() mostly
consisted of, even though the only difference is that it draws a
separate map and screen edge spikes are drawn.
This removes lots of duplicated code that drawtowerentities() did,
because all that really changed was accounting for map.ypos (which can
be done conditionally) and where and when the room wrapped (which can
also be done conditionally).
This fixes an oddity that's only visual, which could only happen in
custom levels by using the createentity() internal command.
For the same reason that the second through fourth tiles of moving
platforms on the top and left was buggily rendered, SDL_BlitSurface()
strikes again to mutate the SDL_Rect we pass it and render the next
SDL_BlitSurface() call inbounds, even though we don't need it to.
Previously, the game could end up rendering a warping sprite twice due
to the fact that it could run "if entity is on the right side of the
screen" right after "if entity is on the left side of the screen" (but
not the other way around). This is most noticeable if you have a custom
player sprite with translucent pixels and stand on the left side of a
warping screen, but the code suggests it happens when warping through
the top of the screen, too.
Instead of doing
if (!obj.entities[i].invis)
{
...
}
It's better to do
if (obj.entities[i].invis)
{
continue;
}
...
It reduces the indentation by one level, which is always a good thing.
In the last commit, I removed having the flip mode conditional directly
inside the sprite-drawing code for each size type, which would reduce
the indentation one level. However, I opted to hold off un-indenting
until this commit, otherwise it would've produced too much noise.
The game uses flipsprites.png instead of sprites.png when in flip mode,
mostly to add exceptions for sprites that SHOULDN'T be flipped in flip
mode.
Looks like to achieve this, the routines for sprite drawing got
copy-and-pasted every single time flipsprites.png needed to be
conditionally used, resulting in large amounts of copy-pasted code. And
this copy-pasted code resulted in copy-paste errors, with relating to
VVVVVV-Man, because apparently due to two copy-pasting errors, the
combined giant crewmate in the epilogue uses flipsprites.png even if you
aren't in flip mode, and it also uses the width instead of the height of
sprites_rect when in flip mode (although, this doesn't end up mattering,
but still).
The solution here is to simply change the referenced sprites vector to a
pointer that can conditionally change based on the game being in flip
mode or not.
Looks like I forgot to test that my music silencing patch didn't break
the music being silent during the "You have found a shiny trinket" and
"You have found a shiny crewmate" text boxes. So I've added a check for
game.completestop in the music handling in main.cpp.
Found this bug while I was testing my towerlogic/gamelogic merge patch.
The problem here is that we're directly using the C stdio library,
instead of using PHYSFS's stuff. So I've added a function
FILESYSTEM_delete() that does exactly that.
This commit fixes a slightly frustrating thing where if you start a new
game, and then exit before saving, "start game" will always take you to
a new game, even though you have unlocked things like the Secret Lab or
Time Trials.
Now, if you select "new game" (only possible if you have something
unlocked), then quit before saving, "start game" will still take you to
the play menu, but "continue" is replaced with "start" and "new game" is
gone.
This will be a useful shorthand to ask "do we have the Secret Lab, or
any Time Trial, or Intermission replays, or No Death Mode, or Flip Mode
unlocked?"
This fixes being able to rack up a large amount of stack frames by
pressing Esc repeatedly in the editor, which would be a problem if you
were to then return to the main menu afterwards.
Instead, if Menu::ed_settings is already in the stack, the game will
simply return to that menu instead of creating it. Else, it will just
create the menu.
Also, as extra attention to detail, I made sure that the menu create or
return only happens if Esc opens the settings menu, and not when Esc is
closes it.
This stabilizes the code that handles the menu that you land on if you
press Esc and quit to the menu.
Instead of using Game::returnmenu(), we now use the new function
Game::returntomenu() to clearly express intent that we want to return to
a specific menu. So I've added another kludge variable
Game::wasinintermission for the was-in-intermission case.
Also, I made it so that if you didn't have a main game telesave or
quicksave, you just get brought back to the main menu. Because you
shouldn't be able to go to the play menu without a quicksave or
telesave.
When exiting from a game-gamestate which may have been entered through a
varying amount of menus, the solution is to not use Game::returnmenu(),
and to instead have a way to go back to a certain given menu.
This commit fixes a bug where the second, third, and fourth tiles of
moving platforms would render offset from the first tile if the moving
platform hit the top or left edge of the screen.
This is due to the fact that SDL_BlitSurface() will end up changing the
coordinates of the rectangle we pass to it to be 0 if they're negative,
but only after it's already been drawn. Previously, we kept re-using the
same rectangle each time we drew each segment of the moving platform,
but since it only changes the draw rectangle after it's already been
drawn, the first tile shows up fine, but not the rest of the tiles,
hence resulting in an offset.
To fix this, we do the same thing as we did for drawing the "really big
sprite" (size-type 9): just reset the rectangle we use every time we
draw a segment of the moving platform.
They're literally the exact same thing, except one is 4 and the other
has an 8. No need to have all that copy-pasted code.
Actually, the only other difference was that size-type 8 set the
drawRect to sprites_rect instead of tiles_rect for some reason? Even
though it doesn't matter, anyway, because SDL_BlitSurface() only cares
about the X and Y you pass it, not the width and height, which is the
only difference between tiles_rect and sprites_rect.
To make sure that people wouldn't wonder where size-type 8 went if they
saw a blank space between size-type 7 and size-type 9, I kept the
size-type 8 conditional, but inside it is just a comment telling you to
go to size-type 2.
Instead of copy-pasting all the BlitSurfaceStandard()s all over again,
just make the referenced vector a pointer that changes depending on
map.custommode.
There's a noticeable seam in the horizontal and warp backgrounds
whenever you enter a new room. Entering a new room triggers the game to
re-draw the entire warp background instead of simply scrolling what it
already has. This seam is the result of the initial background draw
being misaligned with the rest of the scrolling.
If you get out your measuring tools, you'll see that it's misaligned by
exactly 3 pixels (this applies to both horizontal and vertical warping).
If you look at the part of the code where the game draws fresh warping
textures after scrolling the existing ones offscreen, you'll see it
starts with an offset of 317, which is exactly 320 minus 3. And for
vertical, it uses 237, which is exactly 240 minus 3.
This is where the misalignment comes from. Since the incoming textures
are drawn 3 pixels to the left, but the initial draw isn't, this results
in a misalignment and causes the seam.
To fix this, draw the initial draw of the horizontal and vertical warp
backgrounds 3 pixels to the left.
It looks like one bracket got out-of-place for whatever reason. This
doesn't affect the case-switch at all, due to how case-switches work,
but it's still weird to look at.
Indentation has been updated accordingly.
Some custom levels have their own custom music and sync that music to
scripted cutscenes, which is actually pretty impressive. However,
they've always run into a small thorn, which is that you can easily
desync the music by unfocusing the game, because the audio will keep
playing when the game is unfocused.
This should remove that thorn by pausing the audio on unfocus, and
resuming when focused, so that the music can no longer desync, but you
can still pause the game by unfocusing it.
This is yet another feature in VCE that hasn't been upstreamed until
now.
It looks like this variable was originally intended to keep track of th
volume of the game, but then it was used as a boolean in main.cpp to
make sure the game didn't call Mix_Volume() and Mix_VolumeMusic() every
frame.
However, it is now a problem, because I put the music mute handling code
in the very branch that game.globalsound protects against, but since
game.globalsound is here, if I mute the music, then mute the whole game,
then unmute the music, and then unmute the whole game, sound effects
will no longer be muted but the music will still be muted, until I mute
and unmute the whole game again. This is annoying and inconsistent, so
I'm removing this check from the 'if (!game.muted)' branch.
Plus, given that the Mix_VolumeMusic() and Mix_Volume() calls happen
every frame if the game is muted anyways, it doesn't seem to be a
problem to call these every frame.
These do basically nothing. The only time they're used is
getGlobalSound() in an if-statement in main.cpp, but all that
if-conditional does is call setGlobalSound() anyway, which is something
that doesn't really have any side effects. So I'm removing these vars to
simplify the code.
This is for people who want to use their own soundtrack while playing
the game, but who don't want to mute the sound effects as well.
This feature was added to VCE, but it was added in the strangest way. It
was made an option in "game options" instead of being a keybind, and I
don't know why.
The environment variable SteamTenfoot corresponds with the game running
in Steam Big Picture mode or SteamOS if it is defined. There's a
certification process for both full controller support and Big Picture
mode, and being able to launch a file window in Big Picture mode is an
instant cert failure.
Have to add some includes and put these behind some ifdefs, of course.
I'm pretty sure FreeBSD and OpenBSD and Haiku are POSIX enough that the
"open" command will work on them, too.
I would've loved to make FILESYSTEM_openDirectoryEnabled a simple bool
instead of a function, but I ran into issues with putting it in the
FileSystemUtils header file, so I'll just make it a function and call it
a day.
This fixes a bug where levels in the levels list duplicate if there's an
invalid file (such as a folder) in the levels directory.
It looks like it happens because we don't free the memory if
PHYSFS_readBytes() encounters an error, even though we should. Then we
get into Undefined Behavior territory and end up reusing memory, and
here it just happens that previously, parsing the entire XML document
for each level file was enough to make the loaded file pointer point to
garbage that would fail the metadata check, but if we optimize it so we
don't parse the entire XML document, it starts reusing memory instead.
To find each individual tag quickly, to optimize levels list loading.
I opted to not read the tags <Created>, <Modified>, and <Modifiers> as
they're actually pretty useless.
Also I've added a tag finder for <MetaData> but it's not meant to be
used directly, it's only used to check that the tag exists.
This turns the implicit-fallthrough warning into a full compile-time
error.
Implicit fallthrough is when you forget a break statement in a
case-switch, thus letting one case fall through into the next case and
causing debugging headaches.
This is different from the good type of fallthrough that you use to have
one case with multiple different names, like so:
case 0:
case 1:
case 2:
In that case, it's obvious that you want to have fallthrough there.
The problem was, if you were in a time trial and quit, it wouldn't go
back to selecting your current time trial. But also if you were in a
custom level and quit, you would still be on the playerworlds menu.
The problem was twofold: first, I simply wasn't doing the custommode
check. But secondly, I couldn't use map.custommode directly, because
whenever you quit the game aggressively hardreset()s everything
immediately when you press ACTION.
There's probably a good reason for that aggressive hardreset(), so I
won't touch that hardreset() in any way. Instead, I had to introduce two
kludge variables wasintimetrial and wasincustommode to Game, and use
those to do the check proper.
This makes it more convenient if you have a large levels directory, as
some people in the VVVVVV custom levels community do.
On the first page, this option will change to be "last page" instead.
Since the addition of another menu option pushes up the list of levels
too close to the selected level data itself, I've had to move the list
of levels down by 4 pixels (but "next page"/"previous page"/"return to
menu" are still in their same position).
This feature was already added to VCE but hasn't been upstreamed until
now.
This also replaces some createmenu()s with returnmenu()s as needed even
when said createmenu()s already didn't go to the main menu.
Now when you exit the level editor, you'll be selecting the "level
editor" option in "play levels", and if you exit from a level you'll
still be selecting that level in the levels list.
Furthermore, regardless of what you're exiting, your cursor position
will be remembered.
This is to not reset your cursor position every time you return on
something. It's also to automatically keep track of which menu was the
previous menu instead of manually hardcoding said previous menu.
You were able to mismatch the color of the quicksave/telesave summary
and the text/background by pressing Esc when in the "continue" menu,
then pressing ACTION on "no, return".
This commit fixes that bug by putting the map.settowercolour(3) inside
the Menu::continuemenu creation code itself. However, since the
Menu::youwannaquit code does map.nexttowercolour() right after it does
the game.createmenu(), we also need to put the map.nexttowercolour()
before the game.createmenu() beforehand so it doesn't mess up the cyan
color that Menu::continuemenu sets.
Additionally, I removed the map.settowercolour() from the input handling
of Menu::play, as it's superfluous.
This marks pressing ACTION on "next page" in the levels list, credits,
pressing ACTION on "continue" in "You have unlocked" menus, and pressing
ACTION on an unlock option in the unlock menu and time trial unlock menu
as being the same menu.
This is to prevent creating unnecessary stack frames when using said
menu options in those menus.
These aren't necessary, the menu will update regardless. There isn't
even such a call for the mouse cursor toggle option, that's how
unnecessary it is.
Unless it's the main menu, or unless it's not the same menu. Whether or
not the menu is the same is left up to the caller, because some menus
could be the same but use different names, so we can't simply
automatically check that the names are different and assume that they
aren't the same menu.
This temp variable isn't used anywhere else, and even if it was it's set
to something every time it's used, so there's no risk of this commit
breaking any backwards compatibility.
I assume it was so a dev could mark the spot where they needed to put in
the analogue toggle, and they found a unique yet easy to remember
sequence of characters to Ctrl+F as a marker.
Looks like it was a remnant from the Flash days, and the "delete your
saves if you want to use slowdown" was a bit too mean so it stopped
being a thing in the C++ version.
Much more stylistic, you don't need to repeat "game.currentmenuname" for
each case, and you don't need to deal with the dangling first "if" that
doesn't have an "else".
I presume it was meant to have the text of the currently-selected menu
option inside it, before the code switched over to using the indice of
the currently-selected menu instead? Would've been more error-prone to
use the text name directly.
Stringly-typed things are bad, because if you make a typo when typing
out a string, it's not caught at compile-time. And in the case of this
menu system, you'd have to do an excessive amount of testing to uncover
any bugs caused by a typo. Why do that when you can just use an enum and
catch compile-time errors instead?
Also, you can't use switch-case statements on stringly-typed variables.
So every menu name is now in the enum Menu::MenuName, but you can simply
refer to a menu name by just prefixing it with Menu::.
Unfortunately, I've had to change the "continue" menu name to be
"continuemenu", because "continue" is a keyword in C and C++. Also, it
looks like "timetrialcomplete4" is an unused menu name, even though it
was referenced in Render.cpp.
I think it's about time that this number be updated, yeah? This isn't to
say that 2.3 is finished or almost finished or anything, this is just to
clearly differentiate that this isn't 2.2.
If you have invincibility mode or slowdown enabled, the game will not
let you select the Secret Lab, Time Trials, or No Death Mode. To make
this clearer, this commit grays out said options if they are disabled
for that reason.
The game won't let you select the Secret Lab if you're in invincibility
mode, probably so you can't set illegitimate Super Gravitron records
just by standing there and doing nothing.
However, for some reason, it'll still let you select the Secret Lab even
if you've slowed down the game. For consistency, let's prevent selecting
the Secret Lab if the game isn't running at fullspeed, too.
I've converted every "else if"-chain in menu render/input code to be a
case-switch, except for the levels list, the "game options" menu
(because it has the MMMMMM menu option which isn't a compile-time
constant), and the "play" menu (because it has the Secret Lab menu
option which also isn't a compile-time option).
I also did NOT convert some case-switches relating to unlocks in
Input.cpp, mostly because they use a system where the "if we have this
unlocked" conditional is a part of the "if this is the current menu
option" conditional, and they use the 'else' branch to play a sad sound
if that "if we have this unlocked" conditional fails.
I've also converted the game.gameframerate and game.crewrescued() "else
if"-chains to be case-switches instead.
There was one level that was indented with 2 spaces instead of 4, which
made everything else look weird. Then some lines were randomly indented
further for no reason.
Doing this before the next commit is done so as to not make the next
commit noisier.
This removes duplicate code that came about as a result of various
possible permutations of menu options, depending on being M&P, having no
custom level support, having no editor support, and having MMMMMM.
The menus with such permutations are the following:
- main menu
- "start game" is gone in MAKEANDPLAY
- "player levels" is gone in NO_CUSTOM_LEVELS
- "view credits" is gone in MAKEANDPLAY
- "game options"
- "unlock play data" is gone in MAKEANDPLAY
- "soundtrack" is gone if you don't have an mmmmmm.vvv file
- "player levels"
- "level editor" is gone in NO_EDITOR
I achieve this de-duplication by clever use of calculating offsets,
which I feel is the best way to de-duplicate the code with the least
amount of work, if a little brittle.
The other options are to (1) put function pointers on each MenuOption
object, which is pretty verbose and would inflate Game::createmenu() by
a lot, (2) switch all game.currentmenuoption checks to instead check for
the text of the currently-selected menu option, which is very
error-prone because if you make a typo it won't be caught at
compile-time, (3) add a unique ID to each MenuOption object that
represents a text but will error at compile-time if you make a typo,
however this just duplicates all the menu option text, which is more
code than was duplicated previously.
So I just went with this one.
I don't know why you would have to have both defined simultaneously, but
now you can.
The compile fail was caused by the fact that if both were defined, then
there would be an expression like this in Map.cpp:
switch (t)
{
case 0:
}
which is an invalid expression.
The solution is to put 'case 0:' into the MAKEANDPLAY ifdef-guard as
well.
Just like I moved the menu ACTION press handler, I'm doing this as well.
It only removes one level of indentation, but it makes titlerender()
easier to understand.
Just like before, I have to put the separate function first, else
titlerender() won't know what it is.
Previously, the code looked something like:
else { if (...) {...} else { if (...) {...} else { etc. } }
And kept indenting every time there was an else-if.
This commit puts all else-ifs on the same indentation level, so it
doesn't slowly push the code to the right.
This takes out 3 indentation levels from the ACTION press handling,
making titleinput() easier to read as a whole.
Unfortunately, we have to put menuactionpress() first, even though I'd
want it the other way around, otherwise titleinput() won't know what it
is.
If we need it (which I don't think we will be anytime soon) we can
always just get it back through source control. Otherwise, it simply
gets in the way.
Firstly, menu options are no longer ad-hoc objects, and are added by
using Game::option() (this is the biggest change). This removes the
vector Game::menuoptionsactive, and Game::menuoptions is now a vector of
MenuOption instead of std::string.
Secondly, the manual tracker variable of the amount of menu options,
Game::nummenuoptions, has been removed, in favor of using vectors
properly and using Game::menuoptions::size().
As a result, a lot of copy-pasted code has been removed from
Game::createmenu(), mostly due to having to have different versions of
menus depending on whether or not we have certain defines, or having an
mmmmmm.vvv file inside the VVVVVV directory. In the old days, you
couldn't just add or remove a menu option conveniently, you had to
shuffle around the position of every other menu option too, which
resulted in lots of copy-pasted code. But now this copy-pasted code has
been de-duplicated, at least in Game::createmenu().
This removes map.numshinytrinkets in favor of using
map.shinytrinkets.size(). Having automatic length tracking is much less
error-prone and less tedious.
It's treated like a bool anyway, so might as well make it one.
This also necessitates updating every single instance where it or an
element inside it is used, too.
Looks like it was here from that arg passing stuff from earlier, as a
workaround to not pass args around. Well, there's no need to create an
extra UtilityClass now either, just use the one in the global namespace.
Previously, it existed solely to count the number of trinkets and
crewmates when loading a level, because we were keeping track of the
amount of them manually, incrementing and decrementing every time a
trinket or crewmate was added or removed, but loading a new level
represented a case that could potentially not be an increment or
decrement.
However, since the amount tracking is now handled automatically, this
function now does nothing, and can be safely removed.
Same principle as removing the separate variable to track number of
collected trinkets. This means it's less error-prone as we're no longer
tracking number of trinkets separately.
In the function that counts the number of trinkets, I would've liked to
have used std::count_if(). However, the most optimal way would require
using a lambda, and lambdas are too new for the C++ standard we're
using. So I just bit the bullet and counted them manually.
game.trinkets is supposed to be correlated with obj.collect, however why
not just count obj.collect directly?
This turns game.trinkets into a function, game.trinkets(), which will
directly count the number of collected trinkets and return it. This will
fix a few corner cases where the number of trinkets can desync with the
actual collection statuses of trinkets.
In order to keep save compatibility with previous versions of VVVVVV,
the game will still write the <trinkets> variable. However, it will not
read the <trinkets> variable from a save file.
It's a bit rude to put the user back at the main menu after toggling
something. Maybe they also wanted to do something else in the menu while
they're toggling MMMMMM, there's no reason to immediately put them back
there.
Whenever you collect a trinket, game.stat_trinkets gets updated (if
applicable) to signify the greatest amount of trinkets you have ever
collected in the game. However, custom levels shouldn't be able to
affect this, as their trinkets are not the same trinkets as the main
game.
It turns out that when the game warps moving platforms, it won't remove
the block from the position before they warped. Eventually, these blocks
will pile up and will never be removed, causing a memory leak.
I noticed that the code for going to the adjacent room when offscreen
and for warping instead if the room is warping was a bit
copy-and-pasted. To clean up the code a bit, there's now 5 separate
checks in gamelogic():
if (map.warpx)
if (map.warpy)
if (map.warpy && !map.warpx)
if (!map.warpy)
if (!map.warpx)
I made sure to preserve the previous weird horizontal warping behavior
that happens with vertical warping (thus the middle one), and to
preserve the frame ordering just in case there's something dependent on
the frame ordering.
The frame ordering is that first it will warp you horizontally, if
applicable, then it will warp you vertically, if applicable. Then if you
have vertical warping only, that weird horizontal warp. Then it will
screen transition you vertically, if applicable. Then it will screen
transition you horizontally, if applicable.
To explain the weird horizontal warp with the vertical warp: apparently
if an entity is far offscreen enough, and if that entity is not the
player, it will be warped horizontally during a vertical warp. The
points at which it will warp is 30 pixels farther out than normal
horizontal warping.
I think someone ran into this before, but my memory is fuzzy. The best I
can recall is that they were probably createentity()ing a high-speed
horizontally-moving enemy in a vertically warping room, only to discover
that said enemy kept warping horizontally.
As a result of the previous commit, textboxclass::clear() is now unused.
textboxclass::firstcreate() was already useless. So remove both those
functions and initialize the values in the textboxclass constructor.
This removes the variables graphics.ntextbox, as well as removing
'active' from each text box object. Thus, all text boxes are really
real, and you don't have to check its 'active' variable.
Something that's slightly annoying is that in order to make the vector
of text boxes be properly used, the text box cannot remove itself.
Because the text box does not know it's in a vector. So move the removal
of the text box to drawgui() instead.
Just like earlier, these are of the form
if (cond1) { if (cond2) { if (cond3) { thing; } } }
and are really annoying to read.
Also this removes the remnants of the 'active' system that have been
replaced with 'if (true)' conditionals in order to not add noise to the
diff.
Previously, it was used in order to clear a block and deactivate it, and
the constructor function simply called clear() in order to not duplicate
code. However, clear() is no longer necessary (just remove the block
from the blocks vector), and so we can put initialization right back in
the constructor function.
It turns out the game engaged in pseudo-UB when removing activity zones,
which got turned into actual UB due to the previous commit.
There were three places where this could happen:
- Pressing ENTER on an activity zone in normal gameplay
- Pressing ENTER on an activity zone in in-editor playtesting (because
the code is duped here)
- Pressing ESC and quitting to menu while standing inside an activity
zone
In all cases, game.activeactivity would still be pointing to a
non-existent activity zone. This activity zone in the previous system
would simply be a block with a false 'active', and in the system where
C++ vectors are used properly, would index past the blocks array.
In fact, it is a bug that when you press ENTER on an activity zone, the
activity zone prompt suddenly turns to black, then immediately
disappears. It was pointing to a block that had its clear() method
called, which is why it was all black, and it was an inactive block!
This commit makes it so pressing ENTER on an activity zone smoothly
fades out the activity zone prompt instead of being sudden black.
This removes the variables obj.nblocks, as well as removing the 'active'
attribute from the block object. Now every block is guaranteed to be
real without having to check the 'active' variable.
Removing a block while iterating now uses the removeblock_iter() macro.
Previously there was an entclass::clear(), and initialization of an
entclass was done by calling clear() in order to not duplicate code. But
now there's no need for an entclass::clear(), and it is in fact unused
(just call entityclass::removeentity() instead), so I'm removing this
function.
I guess these were here earlier when there were 'active' conditionals,
but then I removed those, so now they look weird next to the 'i != j'
conditionals, so I'm removing them.
These would be of the form
if (cond1) { if (cond2) { if (cond3) { thing; } } }
which is really annoying to read and could've been written as
if (cond1 && cond2 && cond3) { thing; }
so that's what I'm fixing here.
There will be another commit later that fixes this but in places related
to blocks.
Not sure why this function is here. It makes sense if you know that the
game will only do certain moving platform things if you already have a
moving platform in the room, however apparently this function has
absolutely nothing to do with it.
This function's sole purpose was to make sure obj.nentity was in sync,
and that obj.nentity-1 pointed to the last 'active' entity in
obj.entities. But now that obj.nentity is removed and we use
obj.entities.size() instead, it is no longer necessary.
In the previous commit, if an if-statement consisted solely of checking
the active attribute of an entity, I temporarily changed it to 'true'
and put a comment to remove it later, because it would add too much
noise to unindent everything in the same commit.
This removes the variables obj.nentity and obj.nlinecrosskludge, as well
as removing the 'active' attribute from the entity class object. Now
every entity you access is guaranteed to be real and you don't have to
check the 'active' variable.
The biggest part of this is changing createentity() to modify a
newly-created entity object and push it back instead of already
modifying an indice in obj.entities.
As well, removing an entity now uses the new obj.removeentity() function
and removeentity_iter() macro.
Also when we switch everything to not use 'active', we'll need this
macro to remove entities while iterating forwards through the vector one
at a time.
Ok, once we switch everything over to not use the 'active' system, it's
easier to read removeentity(t) than it is to read
entities.erase(entities.begin() + t).
This moves the setenemyroom() function onto the entity object itself, so
I can more easily change all 'entities[k].' to 'entity.' in
entityclass::createentity() later.
Additionally, I've had to move the rn() macro from Entity.h to Ent.h, or
else entclass::setenemyroom() won't know what it is.
This moves the setenemy() function onto the entity object itself,
instead of having to give the indice of the entity in obj.entities. This
makes the code more object-oriented so later I can simply change all
'entities[k]' to 'entity.' in entityclass::createentity().
It is an exact duplicate of musicclass::haltdasmusik(), so use that
function instead and update callers. Looks like
musicclass::haltdasmusik() came first, anyway (musicclass::stopmusic()
was only used in editor.cpp).
Looks like musicfade is an unused variable, anyway. I might remove it,
but I have some plans in the future that involve repairing what it was
intended for, so I'll hold off on removing it (and some other unused
variables in Music.cpp) for now.
As discussed earlier, some custom levels have taken advantage of the
fact that songs 0 and 7 loop and also fade in when using PPPPPP while
having an mmmmmm.vvv file present.
The problem is that it would index out-of-bounds if you did this, but
this UB hasn't caused an exception until my change to refactor
script-related vectors by removing their separate length-trackers.
Most of the code was already commented out, and those comments were
removed in earlier commits, but this removes all recording variables
from Game and simplifies the game-gamestate handling in main.cpp a
little bit.
Just a miscellaneous code cleanup.
There's no glitches that take advantage of the previous situation,
namely that 'temp' was a global variable in Logic.cpp and editor.cpp.
Even if there were, it seems like it would easily lead to some undefined
behavior. So it's good to clean this up.
This is the "Behavioral logic", "Basic Physics", and "Collisions with
walls" trio.
They were originally aligned but then I removed global args, thus
misaligning them. So now I'm re-aligning them back again.
Surprisingly not that many. It looks like at one point in development,
damage blocks were created for every single spike in the Tower, before
it was too laggy so they switched to directly checking collision with
the tile instead.
This removes a bunch of commented-out code that was clearly kept from
the Flash version, even though the Flash graphics API is much different
than SDL's. Also removes a bunch of TODOs that either say nothing, or
say something whose meaning has been totally lost to time due to being
completely vague, or something that's already been done and someone
forgot to remove the TODO.
Most of this is telecookie/quickcookie stuff, which was used in the
Flash version, but there's no longer any such thing as a save cookie.
Also one TODO that says to make a function that's now been made.
Unlike, say, the scriptclass i/j/k stuff, these tempstrings are only
purely visual, and there's no known glitches to manipulate them anyway.
Thus I think it's safe to make this cleanup.
It looks like this may have been used earlier in development, judging
from the name, obviously, but right now it seems like it's used as an
error message if a main game level is asked for an invalid room (well,
only two of them - the Lab and Warp Zone). It should probably be
formalized into an error system, if we want to keep teststring, and also
people would never see it anyway because I don't think there's a
reliable and consistent way to trigger loading a non-existent room.
I have seen someone manage to load a non-existent Warp Zone room only
one time, but even then this teststring didn't pop up. So this
teststring doesn't even trigger in the right circumstances.
Also, when it does pop up, as far as I can tell it will stay onscreen,
which is kinda annoying. So I'm just removing this ancient relic from
the code.
To be fair, it was more on the level of entire functions using different
indentation than the surrounding code, but it's not consistent enough
for me to justify leaving it alone.
Looks like this function was created because editorclass::load() takes
in a string by reference, not by value, and thus mutates it afterwards,
so if you passed a string in when you didn't want it to be mutated, bad
things would happen.
However, a better workaround for the above issue would simply to
duplicate the string and pass that string instead, thus the original
string wouldn't be affected.
To reiterate, I just want to remove the mixed indentation that just
randomly pops up in the middle of a file, because it gets annoying.
Thus, the indentation of a particular piece of code should simply match
the surrounding code. And I consider it completely fine that this file
switches from indenting 4-wide spaces to tabs starting from
Graphics::setcol() onwards. I don't think it's worth it to untabify
Graphics::setcol() and below.
This removes all indentation that suddenly switches in the middle of a
function. Most particularly egregious offenses are the ones made by the
person who has 2-wide tabs, but keeps tabbing up to make each
indentation level match up with the 4-wide spaces, so to them (and only
them) it will look just fine, but since by default tabstop is 8-wide,
their lines are pushed off all the way to the right.
This changes something like UtilityClass::String to help.String,
basically. It takes less typing this way, and is a neat effect of having
global args actually be global variables.
Now that it does nothing due to some earlier changes, it's a useless
function that does nothing. (Well, it was already a useless function,
but those earlier changes made it clearer just exactly how useless it
is.) So remove that function and remove all its callsites.
'swfStage' gets set to 'stage' in updategraphicsmode() but... that does
absolutely nothing, because they both contain exactly the same thing.
And these variables aren't referenced anywhere else. So I'm removing
both of these variables.
Although it keeps getting set to true and false in various places, it
never once gets checked, essentially deeming it a variable that's used
but does nothing.
The 'r', 'g', and 'b' arguments do absolutely nothing. Except unlike
Graphics::drawtile(), there's only one version of Graphics::drawtile2(),
so just remove those args and update callers.
The 'r', 'g', and 'b' arguments do absolutely nothing, even though
they're used in the version of Graphics::drawtile() that's more used. So
delete the other version without those extra arguments, and then remove
the extra arguments from the remaining version. And then update callers.
This removes all global args in all functions in titlerender.cpp.
Additionally, all 'dwgfx' has been renamed to 'graphics' in that file
(there are a lot of them, as you might guess).
This commit removes the passing around of global args in the logic
functions. Additionally, all 'dwgfx' has been replaced with 'graphics'
in Logic.cpp.
This removes global arg passing from all functions on editorclass.
Callers have been updated correspondingly. Additionally, all 'dwgfx' has
been replaced with 'graphics' in editor.cpp.
This commit removes all global args from the parameters of each function
on the scriptclass object, and updates all places they are called
accordingly. It also changes all instances of 'dwgfx' to 'graphics' in
Script.cpp.
Interestingly enough, it looks like editor.h depended on Script.h's
class define of the musicclass. I've temporarily placed the class define
in editor.h, but by the end of this patchset it'll be gone.
This removes global args from all functions on the Graphics class.
Callers of those functions in other files have been updated accordingly.
Of course, since Graphics.cpp is already in the Graphics namespace,
I do not need to change all 'dwgfx' to 'graphics' in Graphics.cpp.
This commit removes the global args being passed around from the
function args on the mapclass object, as well as updating all callers in
other files to not have those args. Furthermore, 'dwgfx' has been
renamed to 'graphics' in Map.cpp.
This commit removes all global args from functions on the entityclass
object, and updates the callers of those functions in other files
accordingly (most significantly, the game level files Finalclass.cpp,
Labclass.cpp, Otherlevel.cpp, Spacestation2.cpp, WarpClass.cpp, due to
them using createentity()), as well as renaming all instances of 'dwgfx'
in Entity.cpp to 'graphics'.
I've decided to call dwgfx/game/map/obj/key/help/music the "global args".
Because they're essentially global variables that are being passed
around in args.
This commit removes global args from all functions on the Game class,
and deals with updating the callsites of said functions accordingly. It
also renames all usages of 'dwgfx' in Game.cpp to 'graphics', since the
global variable is called 'graphics' now.
Interesting to note, I was removing the class defines from Game.h, but
it turns out that Graphics.h depends on the mapclass and entityclass
defines from Game.h. And also Graphics.h spelled mapclass wrong (it
forgot the "class") so I just decided to use that existing line instead.
This is only temporary and after all is said and done, at the end of
this pull request those class defines will be gone.
This is a refactor that turns the script-related arrays `ed.sb`, and
`ed.hooklist` into C++ vectors (`script.commands` was already a vector, it was
just misused). The code handling these vectors now looks more like idiomatic
C++ than sloppily-pasted pseudo-ActionScript. This removes the variables
`script.scriptlength`, `ed.sblength`, and `ed.numhooks`, too.
This reduces the amount of code needed to e.g. simply remove something from
any of these vectors. Previously the code had to manually shift the rest of
the elements down one-by-one, and doing it manually is definitely error-prone
and tedious.
But now we can just use fancy functions like `std::vector::erase()` and
`std::remove()` to do it all in one line!
Don't worry, I checked and `std::remove()` is in the C++ standard since at least
1998.
This patch makes it so the `commands` vector gets cleared when
`scriptclass::load()` is ran. Previously, the `commands` vector never actually
properly got cleared, so there could potentially be glitches that rely on the
game indexing past the bounds set by `scriptlength` but still in-bounds in the
eyes of C++, and people could potentially rely on such an exploit...
However, I checked, and I'm pretty sure that no such glitch previously existed
at all, because the only times the vector gets indexed are when `scriptlength`
is either being incremented after starting from 0 (`add()`) or when it's
underneath a `position < scriptlength` conditional.
Furthermore, I'm unaware of anyone who has actually found or used such an
exploit, and I've been in the custom level community for 6 years.
So I think it's fine.
Someone being mean could've overwritten the telesaves of unsuspecting
players, or unlocked a bunch of stuff which they shouldn't have for
those players, using things like the telesave() command and gamestates.
To prevent this, return early in Game::savequick(), Game::savetele(),
and Game::unlocknum() if we are in custommode.
Instead of passing the error codes out of the function, just handle the
errors directly as they happen, and fail gracefully if something goes
wrong instead of continuing.
Whenever you would press Alt+Enter, or Alt+F, or on macOS Command+Enter,
or on macOS Command+F, or F11, the game would print this useless error
message to console, every single time: "Error: failed: " and it would
concatenate SDL_GetError() after it, but most of the time SDL_GetError()
is blank, so it would print just that.
Instead, what the fullscreen shortcut will now do is check the result of
the relevant SDL functions, BEFORE it decides to print an error message.
And when it DOES print an error message, it will be less vague and will
say instead "Error: toggling fullscreen failed: <output of
SDL_GetError()>".
This means Screen::ResizeScreen() and Screen::toggleFullScreen() are now
int-returning functions. Ideally, every function interfacing with SDL
would return an error code, but that's too much for this simple patch.
Additionally, I took the opportunity to clean up the surrounding
formatting of the code a bit, most notably dedenting the
keypress-clearing stuff by one tab level, converting the
shortcut-handling code to spaces, and removing commented-out code.
Each check has been put in its own variable, so the final conditional is
more readable, and the ifdef is no longer right smack in the middle of
an if-statement.
Also the control flow has been changed (the "else" has been removed from
the shortcut-checking conditional) so I could put the variables closer
to the actual conditional itself. I don't think it affects anything,
though.
This patch allows the use of pressing F11 to toggle fullscreen, as well as
allowing the use of Right Command when using the Command+Enter/F shortcut on
macOS. Apparently Alt+Enter isn't the only shortcut to toggle fullscreen,
Alt+F also works, which I didn't know before.
I'm adding F11 as a shortcut because it's a far more natural shortcut to
toggle fullscreen than this Alt+Enter or Alt+F business, which seems to be a
relic mimicking some other games and some Microsoft stuff?
I'm also adding RCommand+Enter/F because I see no reason not to. If you can
use RAlt on non-macOS, why can't you use RCommand on macOS, too?
I also cleaned up the formatting relating to the shortcut code, and made sure
the closing parenthesis was outside the ifdef so my text editor wouldn't
highlight the parenthesis inside the non-macOS ifdef-branch as a dangling
closing parenthesis, because it assumes the one in the branch above is the
actual closing parenthesis and doesn't parse macros.
If you Alt+Tabbed while in fullscreen mode, the game would stay in
fullscreen instead of switching to windowed, but there was a chance it
would EITHER use the same internal resolution which would mismatch the
window resolution (don't know when exactly this happens, but still) and
stay being in an actual windowed mode, OR switch between
fullscreen/windowed every other time you re-focused the window, which is
annoying.
Now, whenever you Alt+Tab in fullscreen, the game will be in windowed
mode, and then when you re-focus it will go back to fullscreen.
Consistently.
Previously, the only way to guarantee that the game actually saved your
unlock.vvv after changing an option, was to ensure you pressed ACTION on
the "quit game" menu option.
This makes Alt+F4 graceful in that pressing it will also save
unlock.vvv, as it should. Now truly UN-graceful ways of exiting the
game, such as SIGSEGV, SIGABRT, or pkill -9 or pkill -15 will not save
unlock.vvv, as should be the case.
Text outline is not drawn on roomtext when you're actually playing the
game, so don't draw the outline in the editor, either.
FIQ mistakenly added text outline to roomtext in
ca9f577fc4.
There's an if-else chain that first deals with figuring out if there's
an entity where your left-click happened, and to do this it uses
edentat(), which returns a sentinel value of -1 if there is NOT an
entity where your cursor is.
It's very important to check that the value returned ISN'T -1 before you
start indexing the 'edentity' vector, since if you DO index it with that
-1, it'll result in Undefined Behavior because you're doing an
out-of-bounds array access.
Now, here's what the if-else chain looked like before:
if(tmp==-1 && ed.free(ed.tilex,ed.tiley)==0)
{
...
}
else if(edentity[tmp].t==1)
The bug here is very subtle but it was an easy oversight. Basically, if
'ed.free' ended up not being zero, control flow would jump to the next
"else if" over, which then ends up asking for the -1th index of
'edentity', which is Undefined Behavior.
This undefined behavior has now resulted in a crash on my system after
TerryCavanagh/VVVVVV#172, due it shuffling things around juuuuust enough
such that this UB would end up resulting in a segfault instead of
chugging along and working fine. For me and my system, this meant that
if my first left-click in the editor upon opening the game was me
placing down a tile and not placing down an entity, the game would
crash. But, it would be fine if I first placed down an entity and then
afterwards placed down tiles, because it's UB.
And I'm almost certain this was the cause of the very strange bug where
you couldn't hold down left-click for the foreground-placing tool (but
you COULD for the background-placing tool) that seemed to occur most
often on Windows (TerryCavanagh/VVVVVV#25).
The solution to this is to stick in another conditional in the tree
before any indexing occurs, such that there's no way any other
conditionals with the indexing in the conditional tree could end up
being hit. In summary, the if-else chain looks like this now:
if(tmp==-1 && ed.free(ed.tilex,ed.tiley)==0)
{
...
}
else if(tmp == -1)
{
//Important! Do nothing, or else Undefined Behavior will happen
}
else if(edentity[tmp].t==1)
This turns the array 'edentity' into a proper vector, and removes the need to
use a separate length-tracking variable and manually keep track of the actual
amount of edentities in the level by using the long-winded
'EditorData::GetInstance().numedentities'. This manual tracking was more
error-prone and much less maintainable.
editorclass::naddedentity() has been removed due to now functionally being the
same as editorclass::addedentity() (there's no more
'EditorData::GetInstance().numedentities' to not increment) and for also being
unused in the first place.
editorclass::copyedentity() has been removed because it was only used to shift
the rest of the edentities up manually, but now that we let C++ do all the
hard work it's no longer necessary.
This refactors the roomtext code to (1) not use ad-hoc objects and (2)
not use a separate length-tracking variable to keep track of the actual
amount of roomtext in a room.
What I mean by ad-hoc object is, instead of formally creating a
fully-fledged struct or class and storing one vector containing that
object, this game instead hacks together an object by storing each
attribute of an object in different vectors.
In the case of roomtext, instead of making a Roomtext object that has
attributes 'x', 'y', and 'text', the 'text' attribute of each is stored
in the vector 'roomtext', the 'x' attribute of each is stored in the
vector 'roomtextx', and the 'y' attribute of each is stored in the
vector 'roomtexty'. It's only an object in the sense that you can grab
the attributes of each roomtext by using the same index across all three
vectors.
This makes it somewhat annoying to maintain and deal with, like when I
wanted add sub-tile positions to roomtext in VVVVVV: Community Edition.
Instead of being able to add attributes to an already-existing
formalized Roomtext object, I would instead have to add two more
vectors, which is inelegant. Or I could refactor the whole system, which
is what I decided to do instead.
Furthermore, this removes the separate length-tracking variable
'roomtextnumlines', which makes the code much more easy to maintain and
deal with, as the amount of roomtext is naturally tracked by C++ instead
of us having to keep track of the actual amount of roomtext manually.
This fixes a source of undefined behavior, where the int returned by
ss_toi() would be random garbage memory if the string passed into it
would be empty. That's because if the string is empty, there are no
characters to parse, so nothing simply gets put into x.
The easiest way to pass an empty string in to ss_toi() would be to use
script commands with empty arguments.
The problem was that the code seemed to be wrongly copy-pasted from the
code for generating the trinket-found text boxes (to the point where
even the comment for the crewmate-found text boxes didn't get changed
from "//Found a trinket!").
For the trinket-found text boxes, they use y-positions 85 and 135 if not
in flip mode, and y-positions 105 and 65 if the game IS in flip mode.
These text boxes are positioned correctly in flip mode.
However, for the crewmate-found text boxes, they use y-positions 85 and
135 if not in flip mode, as usual, but they use y-positions 105 and 135
if the game IS in flip mode. Looks like someone forgot to change the
second y-position when copy-pasting code around.
Which is actually a bit funny, because I can conclude from this that it
seems like the code to position these text boxes in flip mode was
bolted-on AFTER the initial code of these text boxes was written.
I can also conclude (hot take incoming) that basically no one actually
ever tested this game in flip mode (but that was already evident, given
TerryCavanagh/VVVVVV#140, less strongly TerryCavanagh/VVVVVV#141, and
TerryCavanagh/VVVVVV#142 is another flip-mode-related bug which I guess
sorta kinda doesn't really count since text outline wasn't enabled until
2.3?).
So I fixed the second y-position to be 65, just like the y-position the
trinket text boxes use. I even took the opportunity to fix the comment
to say "//Found a crewmate!" instead of "//Found a trinket!".
Previously, when MMMMMM is installed but the user is using PPPPPP, niceplay would still restart the song even if it's the same. That has been fixed. In addition, Plenary and Path Complete no longer loop when MMMMMM is installed but PPPPPP is in use.
This fixes another way you could end up typing on a non-existent line in
the script editor.
In a script with only 1 line, which is empty, the game would let you
press backspace on it, removing the line. This results in you typing on
a non-existent line.
You will keep typing on it until you either close the script or press
Up. If you press Up, you will be unable to get back to the non-existent
line, for it doesn't exist - but the text you typed on the non-existent
line will still be there, until you close the script and re-open it.
This makes the "[Press ENTER to return to editor]" fade out after a few frames, allowing screenshots of custom levels to be cleaner and to make sure nothing is obscured while the user is editing their level.
This commit also adds alpha support in BlitSurfaceColoured, where it takes into account the alpha of the pixel *and* the alpha of the color.
`graphics::getRGBA(r,g,b,a)` was added to help with this.
Following discussion on TerryCavanagh/VVVVVV#153, I suggested that
instead of reverting my M&P guards from TerryCavanagh/VVVVVV#124 (which
would only revert it for The Final Level, The Lab, Overworld, and The
Tower, leaving Space Station 1 & 2 and The Warp Zone alone which could
potentially cause the same problem that motivated
TerryCavanagh/VVVVVV#153), we should initialize the map data with 0s
instead.
It turns out that the line `tstring=tstring[tstring.size()-1];` also appears once in Scripts.cpp.
This causes the game to segfault after activating a terminal with an empty line at the end of it.
I added a quick `if` around this line, and set `tstring` to an empty string when needed.
In `editor.cpp`, there's a few sections of code that try and index stuff using `string.length()-1`.
This causes issues where if the string is empty, the result is -1, causing undefined behavior.
Flibit fixed a few of these cases, like on line `375` of editor.cpp:
`if((int) tstring.length() - 1 >= 0) // FIXME: This is sketchy. -flibit`
It turns out that one of these weren't caught, over at line `471`.
`tstring=tstring[tstring.length()-1];`
This causes builds compiled on Windows to segfault if you load more than one level in the editor.
I added a quick `if` around it, setting `tstring` to an empty string, which seems to fix the problem.
It's really obvious that screen shaking is not processed in towers if
you bring up the pause menu then quickly quicksave and bring it back
down. The screen won't shake, but it will suddenly start shaking if you
exit the tower, finishing off the stalled screenshake timer.
If you died in (11,7) and a moving platform was to the left of the line
x=152, even if it was moving vertically it would get snapped to x=152,
in custom levels.
Surprised nobody has ran into this before (although people have ran into
the other kludge, which is placing tile 59 at [18,9] if you're in a room
on either the line x=11 or y=7).
Previously, in tower mode, being inside walls would just kill you, unlike
being inside walls outside tower mode, which was somewhat confusing.
Also, spikes behaved differently with regards to invincibility, being
unsolid in towers but solid outside them.
This does not change the behaviour of the "edge" spikes in towers.
The only places where you can die in a room without a room name is the
Overworld, and I feel that calling it Dimension VVVVVV is appropriate.
You can't naturally die in The Ship nor the Secret Lab, and you can only
do it by pressing R, so I didn't feel it appropriate to add checks to
make the hardest room be "The Ship" or "The Secret Lab" if you managed
to get your hardest room to be a room in either of those areas.
If you looked at the "- Press ENTER to Teleport -" text in flip mode,
you might have noticed that the outline looked pretty strange and
glitched-out for some reason. It's just the outline rendering
upside-down. To fix this, make PrintOff() use flipbfont instead of
bfont.
The problem with flipme() was that it WAS properly reflecting
("reflecting" as in mirroring over a given line) the text box over the
line y=120, BUT it forgot to account for the height of the text box.
Thus, the text box position would be off by the length of its own
height. And when the text box got taller, this offset would worsen and
worsen.
In flip mode, warping entities would appear to change color for a brief
moment. This is actually them defaulting to the actual color used in
flipsprites.png, instead of first being whited-out and then re-colored
using graphics.setcol().
To fix this, use BlitSurfaceColoured() and pass `ct` along instead of
using BlitSurfaceStandard().
This is useful for distributions, which may not want to put data.zip in
the same directory as the binary. This can't be distribution-specific
due to the license ("Altered source/binary versions must be plainly
marked as such, and must not be misrepresented as being the original
software.").
If you died in Prize for the Reckless, which is at (11,7), and respawned
in the same room, tile 59 (a solid invisible tile) would be placed at
[18,9] to prevent the moving platform from going back through the
quicksand.
Unfortunately, the way that this kludge was added is poor.
First, the conditional makes it so that it doesn't happen in ONLY
(11,7). Instead of being behind a positive conditional, the tile is
placed in the else-branch of an if-conditional that checks for the
normal case, i.e. if the current room is NOT (11,7), thus being a
negative conditional.
In other words, the positive conditional is "game.roomx == 111 &&
game.roomy == 107". To negate it, all you would have to do is
"!(game.roomx == 111 && game.roomy == 107)".
However, whoever wrote this decided to go one step further, and actually
DISTRIBUTE the negative into both statements. This would be fine, except
if they actually got it right. You see, according to De Morgan's laws,
when you distribute a negative across multiple statements you not only
have to negate the statements themselves, but you have to negate all the
CONJUNCTIONS, too. In other words, you have to change all "and"s into
"or"s and all "or"s into "and"s.
Instead of making the conditional "game.roomx != 111 || game.roomy !=
107", the person who wrote this forgot to replace the "and" with an
"or". Thus, it is "game.roomx != 111 && game.roomy != 107" instead. As a
result, if we re-negate this and take a look at the positive
conditional, i.e. the conditional that results in the else-branch
executing, it turns out to be "game.roomx == 111 || game.roomy == 107".
This ends up forming a cross-shape of rooms where this kludge happens.
As long as your room is either on the line x=11 or on the line y=7, this
kludge will execute.
You can see this if you go to Boldly To Go, since it is (11,13), which
is on the line x=11. Checkpoint in that room, then touch a disappearing
platform, wait for it to fully disappear, then die. Then an invisible
tile will be placed to the left of the spikes on the ceiling.
Anyway, to fix this, it's simple. Just change the "and" in the negative
conditional to an "or".
The second problem was that this kludge was happening in custom levels.
So I've added a map.custommode check to it. I made sure not to make the
same mistake originally made, i.e. I made sure to use an "or" instead of
an "and". Thus, when you re-negate the negative conditional and turn it
into the positive conditional, it reads: "game.roomx == 111 &&
game.roomy == 107 && !map.custommode".
(19,8) is hardcoded to warp on all-sides no matter what. This is fine,
except for the fact that it was doing this in custom levels, too, even
despite the fact that the warp background and color would be overridden
anyway. The only workaround was to add a warp line to the room in custom
levels. I've added a check for custommode so that this won't happen.
The game uses magic values x=-500 and y=-500 to indicate when a text box
should be centered horizontally or vertically. It does this for x=-1
too, but it's buggy because it only looks at the first line of the text
box to center it. In this commit I fix it so that it will look at all of
the lines of the text box to center it instead.
This uses utfcpp combined with a custom font, in the form of a PNG and text file. By default, the game acts exactly as it did before; custom fonts can be provided by third parties.
This fixes a bug where warp lines created through createentity wouldn't
work without there already being a warp line present in the room as an
edentity.
This fixes a bug where if warpdir() was used during in-editor
playtesting, the changed warp direction would persist even when leaving
playtesting.
This would be very annoying to correct back every time you playtested
and warpdir() was used, so I've added some kludge to store the actual
warp direction of each room when entering playtesting, and then set the
warp directions back when leaving playtesting.
This commit makes `help`, `graphics`, `music`, `game`, `key`, `map`, and
`obj` essentially static global objects that can be used everywhere.
This is useful in case we ever need to add a new function in the future,
so we don't have to bother with passing a new argument in which means we
have to pass a new argument in to the function that calls that function
which means having to pass a new argument into the function that calls
THAT function, etc. which is a real headache when working on fan mods of
the source code.
Note that this changes NONE of the existing function signatures, it
merely just makes those variables accessible everywhere in the same way
`script` and `ed` are.
Also note that some classes had to be initialized after the filesystem
was initialized, but C++ would keep initializing them before the
filesystem got initialized, because I *had* to put them at the top of
`main.cpp`, or else they wouldn't be global variables.
The only way to work around this was to use entityclass's initialization
style (which I'm pretty sure entityclass of all things doesn't need to
be initialized this way), where you actually initialize the class in an
`init()` function, and so then you do `graphics.init()` after the
filesystem initialization, AFTER doing `Graphics graphics` up at the
top.
I've had to do this for `graphics` (but only because its child
GraphicsResources `grphx` needs to be initialized this way), `music`,
and `game`. I don't think this will affect anything. Other than that,
`help`, `key`, and `map` are still using the C++-intended method of
having ClassName::ClassName() functions.
This has two benefits:
(1) The game uses less resources when it is asked to gotoroom to the
same room because it is no longer redrawing the warp background
every single frame, which is very wasteful.
(2) The warp background no longer freezes or flickers if the player is
standing inside a gotoroom script box (which calls gotoroom every
frame or every other frame, because every time the gotoroom happens
the script box gets reloaded).
First, two bug fixes. Room text input mode wasn't properly unset
upon pressing Esc, making the prompt get stuck, requiring you to
add roomtext again and finish it to make it go away. Secondly,
escaping script text input would remove the wrong entity.
I also tweaked the handling slightly so that instead of deleting
the entity if it already existed if escaping from text input,
it merely reverts the change in script name/roomtext to what it
was previously.
I considered refactoring the editor text input handler entirely,
but figured such a change would be a bit too extensive for the
purpose of this repository.
Ingame entities are drawn backwards, probably to draw the player on top,
being entity 0 (usually, at least). Make the level editor draw entities
in the same order.
This is to make sure that the room data of those areas are not
distributed with the M&P binary, even if they are already inaccessible
because of other M&P ifdefs (I tested).
When the game enter towermode, it adjusts player amd camera x/y depending
on what screen the player entered it from (The Tower) or the loadlevel
mode ("minitowers"; Panic Room and The Final Challenge). This code didn't
account for respawning to checkpoints. This is unlikely to matter in most
circumstances, but can cause problems in some corner cases, or with R abuse.
This could cause a player to die, respawn outside camera edges and then
immediately die again due to the edge spikes, repositioning the camera
properly. Invincibility would cause further issues, but that's Invincibility
Mode for you -- if this was the only problem I wouldn't bother.
I added a check that repositions the tower camera appropriately if a player
enter a tower as part of the respawn process.
FillRect() is similar enough to memset when blending isn't used, so the
game will take a fast path drawing the roomname background when the
background is opaque.
This is the variable dwgfx.translucentroomname and <translucentroomname>
in unlock.vvv.
This lets you see through the black background of the roomname at the
bottom of the screen, i.e. it makes the roomname background translucent.
So you can see if someone decides to hide pesky spikes there.
The roomname background used to just be a simple SDL_Rect that was drawn
using SDL_FillRect with a color of 0. Unfortunately, it seems that you
cannot use transparent colors with SDL_FillRect, it just defaults to
being fully opaque. However, you CAN draw surfaces with translucency,
which seems like the easiest thing to do. But the first step is to
convert the roomname background to an SDL_Surface.
This replaces the FillRect()s with SDL_BlitSurface() in the three places
roomnames are drawn: in towerrender, in gamerender, and in editorrender.
For some reason, there are two lines that have been copy-pasted the
exact same way and in the exact same place, namely being at the end of
each branch of the if-else conditional, which makes them be executed no
matter what. If they're going to be executed no matter what, we might as
well make it clearer and take those two lines out of each branch.
I ran the game through Valgrind to catch various issues.
One thing caught my attention -- map.resumedelay. This is
used by The Tower/etc to add a delay before the game is
resumed (probably for camera controls delaying it) for
spawning the player. This variable was uninitialized. Notably,
if I explicitly set it to 592851 or similar, it reproduces the
bug, even if I cannot reproduce it with my typical compilation
flags. So fixing this by initializing it to 0, alongside some
other Valgrind warnings, should fix the problem entirely.
* Add a null terminator to loaded TinyXML files
The TinyXML parse() function expect a C-like string, including terminator.
When xml loading was changed, it loaded the file, but included no such thing.
Thus, we load the file, then reallocate the memory so that we can insert a
null terminator to it, before passing it to parse().
* Tweak TinyXML file loading
Instead of first loading the file content into memory, then reallocate it
to add a null pointer, add an argument to the file load function for whether
to append a null terminator or not, defaulting to false. It still returns the
length without the null pointer in case a length ptr is passed.
An earlier change caused TinyXml to prettyprint specifically the
contents of entities (script names and roomtext) a bit more than
before in level files, and added an unusually high amount of whitespace
(particularly, it added an empty line to every entity). This happens
because, for some reason, an empty string is explicitly being added
when creating an entity XML element. The line is so mysterious it feels
like it probably somehow solved a nasty bug long ago and shouldn't be
touched, but it was probably just a mistake, and with all that
whitespace it doesn't look good.
Previously, if it was called in a custom level, it would say "out of
Twenty" no matter what, even if the level had zero trinkets. This commit
fixes that.
Previously, it was a hardcoded list going up to fifty.
This time, it's less hardcoded. Most of the time, it will take a number,
find out its tens-place word, find out its ones-place word, and combine
the two together. There are special cases for the teens, and the numbers
zero through nine, and one hundred.
Also, now if it is given a negative value, it will just return "???"
instead.
If there are more than one hundred it will still say "Lots".
2.2 will handle this just fine, because there are 100 slots allocated
for trinkets and crewmates, and it will save and load all 100 slots just
fine. Except, it only resets the first 20 slots when starting a level
from the beginning, but that's minor and already fixed in 2.3 anyway.
This commit makes it so you can now place up to one hundred trinkets and
crewmates in the editor.
When editorclass::reset() was resetting the contents of the level
previously, it was mixing up the X and Y bounds. The Y bound was
supposed to be 30*maxheight, and the X bound was supposed to be
40*maxwidth. Instead, it took 30*maxwidth as its Y bound and
40*maxheight as its X bound.
Then, when it actually indexes the contents vector to set each tile to
0, it used 30*maxwidth instead of 40*maxwidth.
The difference between width and height is a bit hard to spot, but one
thing you can do to remember the difference is to remember the fact that
X corresponds with width, and Y corresponds with height. Also, rooms are
40 by 30 tiles, and so X (and therefore width) should correspond with
40, and Y (and therefore height) should correspond with 30.
As a result of mixing up the variables, whenever you played a 20x20 map,
quit the level and then started making a new 20x20 map, the tiles of the
last four rows of the previous map would persist, from y=16 (1-indexed)
all the way to y=20 (1-indexed).
I don't recall anyone ever running into this bug before, which is a bit
strange. But if no one truly has ever ran into this bug before, then I'm
genuinely surprised.
While working on the patch to fix the enemy type room property of each
room not getting reset, and testing the fix, I noticed that for some
reason some contents of the previous level I played in order to test the
enemy type property persisting was ALSO persisting alongside the enemy
type property.
Then I read the code and when I realized that the X and Y bounds were
getting mixed up I groaned. Very loudly.
This fixes a bug where if you loaded a level, then started making a new
level in the editor, the enemy types from the previous level would
persist.
While working on VVVVVV: Community Edition and adding a new room
property for enemy speed, I noticed that enemy type was not getting
reset at all. After some testing, I confirmed that this was the case. So
this bug is fixed now.
This fixes a bug where you could get mismatched text and background
colors on the menu screen by being in the Tower and exiting at a certain
time. The background when mismatched will always be red, which seems to
have something to do with the fact that when you enter the Tower the
game always sets the background to be red. I could get a quick repro
setup going by starting in the checkpoint in Teleporter Divot, then
quickly entering the Tower, exiting, then re-entering, then pressing Esc
and quitting - all done very quickly.
The important thing about this mismatch is that it's only temporary, and
will be corrected when you press ACTION and the color of the text and
background in the menu both change at the same time, which is what
map.nexttowercolour() does. So all I do is simply call that function
when exiting to the menu, and it will fix the color mismatch.
Earlier in 53950e14de65a54d9369c5183a16337782d3dc4e, I made playing a
song while a song was already fading quickly fade out the current song,
but then added an exception for if the fade came from the musicfadeout()
command. This commit adds another exception for if the fade came from
niceplay(), since otherwise the music transitions between areas in the
game would go too quick.
This fixes an issue where you could softlock the game if you exited
playtesting mode by pressing Esc while a "- Press ACTION to advance text
-" prompt was onscreen, then re-entered playtesting and then started any
script.
The "- Press ACTION to advance text -" prompt is most directly
controlled by game.advancetext, but when it appears game.pausescript is
usually set as well. You need to have both variables on at the same time
in order to press ACTION. If only advancetext is on, then you won't be
able to flip but can still move around, but if only pausescript is on,
then the game softlocks because the only way you can turn pausescript
off is by pressing ACTION, but the game will only let you press ACTION
if *both* advancetext and pausescript are on.
This fixes a bug where bringing up the pause screen while in a tower
would draw the room you entered BEFORE the tower during the time it took
for the pause screen to be brought up or down.
This fixes a bug in the editor where if you had cutscene bars active
while exiting playtesting, when you re-entered playtesting, the bars
would do their closing animation even though they should be already
gone.
Out-of-bounds array access is Undefined Behavior, which means Bad
Things.
In this particular case, it was indexing an array by using the
`testeditor` variable. Which is fine, except it was indexing that array
*in a conditional that only happens if `testeditor` is -1*. So it was
indexing an array at position -1, which is Out of Bounds and is Not
Good.
For a long time, VVVVVV has had an issue where if you used custom
graphics with translucent pixels (i.e. pixels whose opacity was neither
0% nor 100%, but somewhere between 0% and 100%), those pixels would end
up looking very ugly. They seemed to be overlaid on top of some weird
blue color, instead of actually being translucent.
This bug only occurred when in-game and not in towermode. So, most of
the time, basically. The translucent pixels only displayed properly
inside the Tower, both minitowers, and the editor (when not
playtesting).
I traced this down to the use of the magic number 0xDEADBEEF in
Graphics::drawmap() and Graphics::drawfinalmap(). Looks like someone had
fun finding a color. Was it you, simoroth? Anyway, I've changed it so it
simply uses 0 instead. Note that this magic number needs to be changed
for BOTH FillRect() and OverlaySurfaceKeyed(), or else the game's
background will be some random solid color instead of actually being
drawn properly.
There's a long-standing issue where the Direct Mode status of the loaded
custom map in memory never resets properly. So if you load a level with
a certain layout of Direct Mode rooms, that same layout will be
preserved if you start making a new level in the editor. This commit
fixes that issue.
Similar to 2ebccbc3e9, there's also a
long-standing bug where if you backspace an empty line (and this time,
the line IS actually already empty, not merely
emptied-earlier-in-the-frame), the game will quickly delete more blank
lines if there are any above the blank line you deleted. Again, this is
annoying too, if you so happen to need to use lots of blank lines.
To fix this, it's simple - just set ed.keydelay to 6 when the game
backspaces an empty line. Then it won't be so trigger-happy in deleting
blank lines.
There is a long-standing bug with the script editor where if you delete
the last character of a line, it IMMEDIATELY deletes the line you're on,
and then moves your cursor back to the previous line. This is annoying,
to say the least.
The reason for this is that, in the sequence of events that happens in
one frame (known as frame ordering), the code that backspaces one
character from the line when you press Backspace is ran BEFORE the code
to remove an empty line if you backspace it is ran. The former is
located in key.Poll(), and the latter is located in editorinput().
Thus, when you press Backspace, the game first runs key.Poll(), sees
that you've pressed Backspace, and dutifully removes the last character
from a line. The line is now empty. Then, when the game gets around to
the "Are you pressing Backspace on an empty line?" check in
editorinput(), it thinks that you're pressing Backspace on an empty
line, and then does the usual line-removing stuff.
And actually, when it does the check in editorinput(), it ACTUALLY asks
"Are you pressing Backspace on THIS frame and was the line empty LAST
frame?" because it's checking against its own copy of the input buffer,
before copying the input buffer to its own local copy. So the problem
only happens if you press and hold Backspace for more than 1 frame.
It's a small consolation prize for this annoyance, getting to
tap-tap-tap Backspace in the hopes that you only press it for 1 frame,
while in the middle of something more important to do like, oh I don't
know, writing a script.
So there are two potential solutions here:
(1) Just change the frame ordering around.
This is risky to say the least, because I'm not sure what behavior
depends on exactly which frame order. It's not like it's key.Poll()
and then IMMEDIATELY afterwards editorinput() is run, it's more
like key.Poll(), some things that obviously depend on key.Poll()
running before them, and THEN editorinput(). Also, editorinput() is
only one possible thing that could be ran afterwards, on the next
frame we could be running something else entirely instead.
(2) Add a kludge variable to signal when the line is ALREADY empty so
the game doesn't re-check the already-empty line and conclude that
you're already immediately backspacing an empty line.
I went with (2) for this commit, and I've added the kludge variable
key.linealreadyemptykludge.
However, that by itself isn't enough to fix it. It only adds about a
frame or so of delay before the game goes right back to saying "Oh,
you're ALREADY somehow pressing backspace again? I'll just delete this
line real quick" and the behavior is basically the same as before,
except now you have to hit Backspace for TWO frames or less instead of
one in order to not have it happen.
What we need is to have a delay set as well, when the game deletes the
last line of a char. So I set ed.keydelay to 6 as well if editorinput()
sses that key.linealreadyemptykludge is on.
For a long time, the script editor has had a bug where it would let you
put the cursor on a nonexistent script line, which would APPEAR to be
the last line of the script... but in reality, it WASN'T the last line
of the script, and in fact, the ACTUAL last line was the line ABOVE the
script.
So, if you typed anything on this nonexistent line, it would appear to
get erased when exiting the script. Thus, people have (erroneously)
misdiagnosed this as the script editor somehow being trigger-happy and
erasing lines when it shouldn't be, when in reality it should've have
let you gone onto that line in the first place!
Hiding the mouse cursor does makes sense in a lot of situations I agree, but it's very much a preference thing, and I don't see a good reason to change the original behavour. Some people (i.e. me) don't like cursors disappearing in windowed mode when you move the cursor over the screen, but most importantly, it makes the editor much less pleasant to use (since you're relying on the 30fps editor cursor box).
I'd be happy to support, say, a setting that allowed you to disable the mouse cursor, or even a 15 second time-out which makes the cursor disappear if not moved (and reappear once moved), but just having it off by default feels wrong to me.
Yikes. Somebody brought this to my attention, I didn't even remember that I'd written it. "Spa" or "Spastic" is kind of a south park esque slang term that used to be pretty common in Ireland, which I used without even thinking about it. It's definitely not something I would say anymore, 10 years on, and it's something I shouldn't have said at the time either. I'm sorry :(
(somebody on twitter was asking me about how much cleaning up of the source code I did before launching this. I think this commit kinda answers that)
* Add entity type attribute checks to getcrewman()
This means that the game is no longer able to target other non-crewmate
entities when it looks for a crewmate.
This has actually happened in practice. A command like
position(cyan,above) could position the text box above a horizontal warp
line instead of the intended crewmate.
This is because getcrewman() previously only checked the rule attributes
of entities, and if their rule happened to be 6 or 7. Usually this
corresponds with crewmates being unflipped or flipped, respectively.
But warp lines' rules overlap with rules 6 and 7. If a warp line is
vertical, its rule is 5, and if it is horizontal, its rule is 7.
Now, usually, this wouldn't be an issue, but getcrewman() does a color
check as well. And for cyan, that is color 0. However, if an entity
doesn't use a color, it just defaults to color 0. So, getcrewman() found
an entity with a rule of 7 and a color of 0. This must mean it's a cyan
crewmate! But, well, it's actually just a horizontal warp line.
This commit prevents the above from happening.
If you're in the room being targeted when a `warpdir()` command is run,
and it sets the warp direction to none (warp dir 0), and if you're in a
Lab or Warp Zone room, the background will be set to the wrong one,
because it will always set the background to the stars-going-left
background, instead of setting it to the Lab background or the
stars-going-up background.
However, this is only a visual glitch, and is a temporary one, because
if you manage to trigger a `gotoroom()` on the room, it will get set to
its proper background.
This commit makes it so if you're in a Lab room, the background gets set
to the Lab background, and if you're in a Warp Zone room, the background
gets set to the stars-going-up background.
There are three map-related vectors that need to be reset in hardreset:
`map.roomdeaths`, `map.roomdeathsfinal`, and `map.explored`. All three
of these vectors use the concatenated rows system, whereby each room is
given a room number, calculated by doing X + Y*20, and this becomes
their index in each vector.
There's a double-nested for-loop to handle resetting all of these, where
the outer for-loop iterates over the Y-axis and the inner for-loop
iterates over the X-axis, but only `map.explored` is properly reset.
That's because it's the only vector that properly indexes using X +
Y*20. The other vectors reset using X, so previously, only the first row
of `map.roomdeaths` and `map.roomdeathsfinal` got reset, corresponding
with only the first row of rooms in both Dimension VVVVVV and Outside
Dimension VVVVVV getting reset.
This commit makes sure that both get reset properly.
There are two main problems with flipgravity():
1. It doesn't work for an already-flipped crewmate.
2. It doesn't work on the player.
This commit addresses both of those issues.
For reference, here is the list of scores for a custom level:
0 - not played
1 - finished
2 - all trinkets
3 - finished, all trinkets
Previously, you could've played a level and finished it and set a score
of 3. Then you could re-play the entire level, but manage to only get a
score of 1, i.e. only finished but not with all trinkets. Then your
score for that level would get set back to 1, which basically nullifies
the time you spent playing that level and getting all of the trinkets.
This commit makes it so your new score will get set only if it is higher
than the previous one.
This disables being able to press M to mute while editing a script in
the script editor. It also disables it in the script list, too, but I'm
hoping no one thinks that's an issue, because I personally don't think
it is.
This fixes a bug where if you died after activating a teleporter prompt
and then respawned in the same room as the teleporter, the teleporter
prompt would go away. Which would be very annoying if you wanted to, you
know, teleport.
You don't even have to R-press to make this happen. "Level Complete!"
and Energize are two teleporter rooms in the main game that have hazards
in them.
I see no reason to set game.activetele to false when dying. For one, it
gets set to false during a gotorom anyway. For another, I couldn't get
the game to activate the teleport prompt in a room without a teleporter
in my testing, mostly because when you touch a teleporter, your
checkpoint is set to that teleporter, so you can't R-press to go to
another room and carry over the teleport prompt.
This uncomments the code for the font outline. Now, you will see the
font outline on text that had it in the Flash version, most notably "-
Press ENTER to Teleport -" and the time trial overlay text.
This also fixes a problem with the commented code, where un-centered
text didn't outline properly.
The game makes sure that the player entity is never destroyed, but in
doing so, it doesn't destroy any duplicate player entities that might
have been created via strange means e.g. a custom level doing a
createentity with t=0.
Duplicate player entities are, in a sense, not the "real" player entity.
For one, they can take damage and die, but when they do they'll still be
stuck inside the hazard, which can result in a softlock. For another,
their position isn't updated when going between rooms. It's better to
just destroy them when we can.
This is similar to what was reverted in 3011911 but this time should use
syntax available even before C++11, tested on Clang with
`-std=c++98 -Wall -pedantic`.
I've never given out my real name online, so I'll sort my username as a
last name. My personal preference would have been to sort the list by
first name instead of last name, since that'd be clearer, plus you
often recognize people by their first name rather than their last name.
The TinyXml functions to load and save files don't properly support
unicode file paths on Windows, so in order to support that properly, I
saw no other option than to do the actual loading and saving via PHYSFS
(or to use the Windows API on Windows and retain doc.LoadFile and
doc.SaveFile on other OSes, but that'd be more complicated and
unnecessary, we already have PHYSFS, right?).
There are two new functions in FileSystemUtils:
bool FILESYSTEM_saveTiXmlDocument(const char *name, TiXmlDocument *doc)
bool FILESYSTEM_loadTiXmlDocument(const char *name, TiXmlDocument *doc)
Any instances of doc.SaveFile(<FULL_PATH>) have been replaced by
FILESYSTEM_saveTiXmlDocument(<VVVVVV_FOLDER_PATH>, &doc), where
<FULL_PATH> included the full path to the saves or levels directory,
and <VVVVVV_FOLDER_PATH> only includes the path relative to the VVVVVV
directory.
When loading a document, a TiXmlDocument used to be created with a full
path in its constructor and doc.LoadFile() would then be called, now a
TiXmlDocument is constructed with no path name and
FILESYSTEM_loadTiXmlDocument(<VVVVVV_FOLDER_PATH>, &doc) is called.
There's now a thin layer of UTF-16 around the WinAPI functions to get
the path to the Documents folder and to create a new directory, so that
account usernames with non-ASCII characters do not result in no VVVVVV
folder being created or used.
