Since musicWriteBlob is a temporary object that gets destroyed at the
end of musicclass::init(), in order to make sure we don't leak memory
and lose all the pointers to the blocks we just allocated in
musicWriteBlob, we need to call its clear() method after writing
BinaryMusic.vvv.
musicReadBlob was used for both MMMMMM and PPPPPP soundtracks. This
causes a memory leak if you have mmmmmm.vvv installed, because the
pointers holding each allocated block of MMMMMM would be lost when
PPPPPP got loaded. Valgrind complains about this memory leak.
This is in contrast to 2.2 and previous behavior, where musicReadBlob
was only a temporary object instead of being held in musicclass.
However, this wasn't really a memory leak (moreso something that just
didn't get cleaned up when closing the game), but it did get turned into
a leak when per-level assets mounting and unmounting got introduced in
2.3 (loading a level with custom assets after starting the game with an
mmmmmm.vvv, or exiting out of a level that had an mmmmmm.vvv, would
cause the game to leak memory). Leo recognized this, and moved
musicReadBlob onto musicclass in a separate 2.3 PR, but either he didn't
think about what was happening here too closely, or he didn't use
Valgrind, because he forgot about the memory leak caused by re-using the
same binaryBlob for PPPPPP and MMMMMM.
So instead, just use two different binaryBlob objects for MMMMMM and
PPPPPP. That way, no memory leaks happen.
I'm going to introduce another binaryBlob object in to the mix, and I
want to be able to re-use an existing FOREACH_TRACK #define without
having to copy-paste it again. So, TRACK_NAMES now takes in a blob
parameter, which will be passed to the temporary FOREACH_TRACK #define.
This removes the music cleanup code from musicclass::init(), and
requires that we also call destroy() in Graphics::reloadresources().
This is because we'll need to re-use the musicclass cleanup code
elsewhere, and we don't want to copy-paste the cleanup code. Or at
least, I don't (but I'm not a game dev, game devs copy-paste all the
friggin' time).
It doesn't feel quite write leaving all the buffer creation code in
main(), even though it's perfectly okay to do so and it doesn't result
in any memory mismanagement that Valgrind can report; so I'm factoring
all of it out to a separate function, Graphics::create_buffers().
As a bonus, we no longer have to keep qualifying with `graphics.` in the
buffer creation code, which is nice.
These destroy all the buffers that are created on the Graphics class.
Since these buffers can't be created at the same time as the rest of
Graphics is (due to the fact that they require knowing the pixel format
of the game screen), they can't be destroyed at the same as the rest of
Graphics is, either.
This is a very complicated way of zeroing out grphx (instead of using
SDL_zero()), which itself is completely unnecessary because grphx.init()
gets called immediately afterwards anyway.
It should be next-line brace, not same-line brace. Even in a codebase
that uses same-line braces everywhere, I still prefer having next-line
braces inside functions (because they're at the top level, and you can't
next them). But regardless, this should still be next-line brace like
(most of) the rest of the codebase.
The function previously conditionally freed a m_memblocks pointer if its
corresponding m_headers was valid. This makes me slightly worried about
the possibility that memory would be allocated, but the header would
still be marked as invalid.
I don't see how that could happen, but it's better to be safe than
sorry. SDL_free() does a guaranteed NULL pointer check (like most SDL
functions), so it's okay to pass NULL pointers to it.
Just to be sure, I'm also zeroing m_memblocks and m_headers after
freeing everything in the function.
MSVC complains about these, doesn't seem like GCC does. These can be
safely removed because they're unreachable, and they always follow a
case-switch or similar that has a default case which this code is a
duplicate of anyway. (Unless it isn't, in which case all the better to
remove it, becausee otherwise it looks misleading or confusing to casual
glances at the code.)
find_tag() would commit out-of-bounds indexing if someone made a level
file with malformed XML entity encodings in the metadata tags.
This would happen if the end of the string followed immediately after an
ampersand and hash, or if there wasn't a semicolon ending an XML entity.
Valgrind complains about these, so I've fixed it.
This fixes a bug where "12" gets properly evaluated as 12, but "148"
gets evaluated as 1408. It's because `place` gets multiplied by `radix`
again, so `retval` gets multipled by 100 instead of 10.
There's no reason to have a `place` variable, so I've removed it
entirely. This simplifies the function a little bit.
The previous person who wrote this (a girl named Misa) clearly didn't
understand the reason why you couldn't compare line[line.length()-1]
directly to a string literal. It's because the former is a char, and the
latter is a pointer to a char. Both are ints, so it compiles fine, but
it doesn't do what you want it to.
Why not just make the latter a char instead of a string literal? Well,
because you can, but also I clearly didn't think this through earlier,
so that's why I didn't do it in the first place.
But this is fixed now.
This avoids an unnecessary copy of the input std::vector, since we don't
need to modify it for anything. This cuts down on unnecessary memory
operations.
Apart from the std::string, this function no longer uses the STL.
ss_toi() is a simple function - it converts the input into an int,
taking as many digits as possible until it reaches a non-digit
character, at which point it stops. It's trivial to implement this
without the STL.
I could've used Int() here, but that would've required copying the
string to a temporary buffer to insert a null-terminator (we can't just
use a pointer-and-length data type either, the string functions don't
operate like that - one disadvantage of C strings!). Instead, I decided
to implement my own conversion to int here, because I don't think the
way we humans write our Arabic numerals is going to change anytime soon.
Also, the std::string input is now passed by const reference, instead of
making a copy - cutting down on unnecessary memory operations.
I personally like putting the asterisk with the type, because despite
the language parsing the asterisk as a part of the name, the pointer
part is clearly a part of the return type of the function. Also,
put constness here, to indicate that the input won't be modified inside
the function.
This comment indicates that the function is used by
UtilityClass::GCString(). Which is unnecessary, because the reader can
trivially search for usages of GCChar in the file itself (the 'static'
preceding the function should be a good enough hint) - and if there
aren't any, then the reader will know the function is unused, whereas if
they read the comment, they would have been under the assumption that it
wasn't used. (There might also a compiler warning about it being unused,
which would be more confusing if the comment was still there.)
Point is, comments can get outdated, so removing the comment here makes
the code more self-documenting.
This is a re-do of 942217f871 (#509), but
with a more conservative fix that only resets the player's newxp and
newyp when they respawn from a checkpoint or spawn in to the map.
Unlike the previous patch, if the player were to suddenly collide with a
conveyor or horizontally-moving platform during gameplay, their
y-position would revert back to the intended next y-position of the
previous frame. But this is the same behavior as before, I haven't ever
seen such a contrived situation come up, and this behavior is probably
more preferable for gameplay than actually going to the conveyor, so
it's fine.
I also decided to reset newxp here, and not just newyp, because while
resetting newyp seems to be enough, it's safer to also reset newxp (and
so future readers won't question why only newyp is reset but not newxp).
I tested this and it once again fixes the death loop issue from earlier,
while also still allowing for that Trench Warfare trick to be possible
(I tested it with the libTAS movie I mentioned in #606; it syncs fine).
There are no other known regressions resulting from this fix
(hopefully).
This reverts commit 942217f871.
This fix (of a regression of a fix) has a regression where immediately
flipping off of horizontally-moving platforms or conveyors will no
longer provide you with a "boost" given certain vertical pixel
alignments.
The regression that this fix fixed will be fixed another way.
Fixes#606.
This works on macOS, Wayland, and a few more esoteric platforms. X11
doesn't have a concept of DPI-awareness. Note that with this flag
SDL_GetWindowSize() isn't guaranteed to return the actual window size.
Retextured checkpoints have always been in the game, but clicking on
them in the editor would lead to them losing their retextured-ness. So,
checkpoints should be left alone if their p1 isn't either 0 or 1. Also,
they don't show up properly in the editor, so that's fixed, too.
Retextured and flipped terminals were added in 2.3, and show up properly
in-game, but don't properly show up in the editor, either. So now they
show up in the editor. Additionally, clicking on them will flip the
terminal as well, but only if its p1 is 0 or 1, just like checkpoints
now do.
This call to Makebfont() always existed, but ever since 2.3's per-level
custom assets were added, graphics.reloadresources() also calls
graphics.Makebfont(), meaning this call is unnecessary. Calling it twice
results in graphics.bfont and graphics.flipbfont having twice the number
of elements, until custom assets get mounted (or unmounted, technically).
This does the same thing as the last commit, but for No Death Mode
instead of Time Trials. Whenever you die in No Death Mode, or complete
it, all the relevant variables get copied to variables prefixed with
'ndmresult' that never get reset by script.hardreset(), and these
variables are what titlerender() use, instead of the "live" ones.
This makes it so when a Time Trial gets completed, all the relevant
variables get copied onto variables prefixed with 'timetrialresult',
which never get reset by script.hardreset(). Then titlerender() will use
those variables accordingly.
There are multiple different exit paths to the main menu. In 2.2, they
all had a bunch of copy-pasted code. In 2.3 currently, most of them use
game.quittomenu(), but there are some stragglers that still use
hand-copied code.
This is a bit of a problem, because all exit paths should consistently
have FILESYSTEM_unmountassets(), as part of the 2.3 feature of per-level
custom assets. Furthermore, most (but not all) of the paths call
script.hardreset() too, and some of the stragglers don't. So there could
be something persisting through to the title screen (like a really long
flash/shake timer) that could only persist if exiting to the title
screen through those paths.
But, actually, it seems like there's a good reason for some of those to
not call script.hardreset() - namely, dying or completing No Death Mode
and completing a Time Trial presents some information onscreen that
would get reset by script.hardreset(), so I'll fix that in a later
commit.
So what I've done for this commit is found every exit path that didn't
already use game.quittomenu(), and made them use game.quittomenu(). As
well, some of them had special handling that existed on top of them
already having a corresponding entry in game.quittomenu() (but the path
would take the special handling because it never did game.quittomenu()),
so I removed that special handling as well (e.g. exiting from a custom
level used returntomenu(Menu::levellist) when quittomenu() already had
that same returntomenu()).
The menu that exiting from the level editor returns to is now handled in
game.quittomenu() as well, where the map.custommode branch now also
checks for map.custommodeforreal. Unfortunately, it seems like entering
the level editor doesn't properly initialize map.custommode, so entering
the level editor now initializes map.custommode, too.
I've also taken the music.play(6) out of game.quittomenu(), because not
all exit paths immediately play Presenting VVVVVV, so all exit paths
that DO immediately play Presenting VVVVVV now have music.play(6)
special-cased for them, which is fine enough for me.
Here is the list of all exit paths to the menu:
- Exiting through the pause menu (without glitchrunner mode)
- Exiting through the pause menu (with glitchrunner mode)
- Completing a custom level
- Completing a Time Trial
- Dying in No Death Mode
- Completing No Death Mode
- Completing an Intermission replay
- Exiting from the level editor
- Completing the main game
Comments in general don't get verified by the compiler, but
commented-out code is even worse. Especially since this looks to be
outdated code.
As always, if we need some of this code, then we can just look back in
the Git history.
While compiling in release mode, GCC warns about these two potentially
being used uninitialized further down. The only way this could happen is
if the case-switches below didn't match up with a case, which would
require the game to be in an invalid state (and have invalid values for
rcol and spcol), but it's better to be safe than sorry.
During 2.3 development, there's been a gradual shift to using SDL stdlib
functions instead of libc functions, but there are still some libc
functions (or the same libc function but from the STL) in the code.
Well, this patch replaces all the rest of them in one fell swoop.
SDL's stdlib can replace most of these, but its SDL_min() and SDL_max()
are inadequate - they aren't really functions, they're more like macros
with a nasty penchant for double-evaluation. So I just made my own
VVV_min() and VVV_max() functions and placed them in Maths.h instead,
then replaced all the previous usages of min(), max(), std::min(),
std::max(), SDL_min(), and SDL_max() with VVV_min() and VVV_max().
Additionally, there's no SDL_isxdigit(), so I just implemented my own
VVV_isxdigit().
SDL has SDL_malloc() and SDL_free(), but they have some refcounting
built in to them, so in order to use them with LodePNG, I have to
replace the malloc() and free() that LodePNG uses. Which isn't too hard,
I did it in a new file called ThirdPartyDeps.c, and LodePNG is now
compiled with the LODEPNG_NO_COMPILE_ALLOCATORS definition.
Lastly, I also refactored the awful strcpy() and strcat() usages in
PLATFORM_migrateSaveData() to use SDL_snprintf() instead. I know save
migration is getting axed in 2.4, but it still bothers me to have
something like that in the codebase otherwise.
Without further ado, here is the full list of functions that the
codebase now uses:
- SDL_strlcpy() instead of strcpy()
- SDL_strlcat() instead of strcat()
- SDL_snprintf() instead of sprintf(), strcpy(), or strcat() (see above)
- VVV_min() instead of min(), std::min(), or SDL_min()
- VVV_max() instead of max(), std::max(), or SDL_max()
- VVV_isxdigit() instead of isxdigit()
- SDL_strcmp() instead of strcmp()
- SDL_strcasecmp() instead of strcasecmp() or Win32 strcmpi()
- SDL_strstr() instead of strstr()
- SDL_strlen() instead of strlen()
- SDL_sscanf() instead of sscanf()
- SDL_getenv() instead of getenv()
- SDL_malloc() instead of malloc() (replacing in LodePNG as well)
- SDL_free() instead of free() (replacing in LodePNG as well)
This patch de-duplicates the tool drawing code a bit in the menu that
gets brought up when you press Space in the level editor, as well as
fixes several bugs related to the fact that the original author(s) of
the code decided to copy-paste everything. (It was most likely Terry,
judging by the distinct lack of whitespace between tokens in the code.)
There are two "pages" of tools that get shown when you open the tool
menu, according to your currently-selected tool.
1. On the first page, your currently-selected tool gets a brighter
outline. However, on the second page, the code to draw the outline over
your currently-selected tool is missing. So I've fixed that.
2. On the first page, the glyph indicator next to the tool icon also
gets brighter when you have that tool selected. However, on the
second page, the code that drew the brighter-colored indicator got
ran before the code that drew the normal-colored indicator, so this
was never shown. This is also fixed.
3. The glyph indicator of the gravity line tool didn't get brighter when
you had it selected, due to its special-cased copy-pasted code
drawing its brighter color before drawing its normal color. This has
also been fixed.
4. Lastly, the tool menu no longer draws the brighter-colored glyphs on
top of the normal-colored glyphs. Instead, the menu will simply draw
the brighter-colored glyphs and will not draw the normal-colored
glyphs in the first place. This is because double-drawing text like
this will look bad if the user has a custom font.png that has
translucent pixels, like I do.
All of these bugs have been fixed by paying off the technical debt of
copy-pasting code.
This variable seems to have been intended to make sure
game.savestatsandsettings() was called at the end of the frame, or make
sure that it didn't get called more than once per frame. I don't see any
frame ordering-related reason why it needs to be called specifically at
the end of the frame (the function doesn't modify any state), so it's
more plausible that it was added to make sure it didn't get called more
than one per frame.
However, upon further analysis, none of the code paths where
game.savemystats is used ever calls or sets game.savemystats more than
once, and a majority of the code directly calls
game.savestatsandsettings() anyway, so there's no reason for this
variable to exist. If we ever need to make sure it doesn't get called
more than once, and there's no way to change the code paths around to
prevent it otherwise, we can use the defer callbacks system that I added
to #535, when it gets merged.
These variables basically serve no purpose. map.customx and map.customy
are clearly never used. map.finalx and map.finaly, on the other hand,
are basically always game.roomx and game.roomy respectively if
map.finalmode is on, and if it's off, then they don't matter.
Also, there are some weird and redundant variable assignments going on
with these; most notably in map.gotoroom(), where rx/ry (local
variables) get assigned to finalx/finaly, then finalx/finaly get
assigned to game.roomx/game.roomy, then finalx/finaly get assigned to
rx/ry. If finalx/finaly made a difference, then there'd be no need to
assign finalx/finaly back to rx/ry. So it makes the code clearer to
remove these weird bits of code.
2.3's per-level assets feature also added a hotkey to reload the custom
assets of the level you're currently editing in the editor, so you
wouldn't have to re-load the level yourself. This hotkey is F9, but
however, it hasn't been documented in the hotkey list brought up by
pressing Shift, until now.
This patch cleans up unnecessary exports from header files (there were
only a few), as well as adds the static keyword to all symbols that
aren't exported and are specific to a file. This helps the linker out in
not doing any unnecessary work, speeding it up and avoiding silent
symbol conflicts (otherwise two symbols with the same name (and
type/signature in C++) would quietly resolve as okay by the linker).
Line clipping and second-frame edge-flipping have been broken since #539
was merged (d910c5118d). The cause of this
is moving the onground/onroof code around.
A proper loop order fix is going to come once #535 gets finalized and
merged, so this is a stopgap measure just to make sure people don't
report that line clipping or second-frame edge-flipping are broken in
current builds of 2.3.
There is a certain ordering of which corners you click on to place enemy
and platform boundaries, and script boxes. You must first click on the
top-left corner, then click on the bottom-right corner. The visual box
that is drawn after you've first clicked on the top-left corner clearly
shows this intended way of doing things.
However, it seems like despite the visuals, the game didn't properly
prevent you from clicking on the corners in the wrong way. If you placed
it from top-right to bottom-left, or bottom-left to top-right, then the
game would place the boxes accordingly, and they would have a weird
shape where two of its opposite sides would just be missing. But,
placing them from bottom-right to top-left is prevented accordingly.
The bug comes down to a simple use of "or", instead of the correct
"and". This isn't the first time the wrong conjunction was used in a
conditional... (8260bb2696, #136)
Since the code block that the if-statement guards is the code that will
execute if the corners placed were correct, the if-statement thus should
be written in the positive case and use a more restrictive "and",
instead of the negative case, which would use a more looser "or". There
are less cases that are correct than cases which are incorrect - in this
case, there is only 1 correct way of doing things (top-left to
bottom-right), compared to 3 incorrect ways of doing things (top-right
to bottom-left, bottom-left to top-right, bottom-right to top-left) - so
when thinking of positive cases, you should be using "and".
Or, you can always just test it. This bug has been in the game since
2.0, so it seems like no one just tested that incorrect input actually
didn't work.
Ever since 2.0, the colors of some of the Time Trial trophies in the
Secret Lab don't correspond to the crewmate of the given level. The
trophy for the Tower uses Victoria's color, and the Lab trophy uses
Vermilion's color. The Space Station 2 trophy uses Viridian's color, and
the Final Level trophy uses Vitellary's color.
This doesn't appear to be intentional, and it would be odd if it was,
since this game matches the colors everywhere else (each zone on the map
is colored with their respective crewmate in mind, for instance). Also,
the Lab trophy has the sad expression, which is Victoria's trait - it
would be weird if this was intended for Vermilion instead.
But the biggest piece of evidence that this was unintentional is the
corresponding comment for each color in Graphics::setcol(). It mislabels
yellow as cyan, cyan as yellow, blue as red, and red as blue.
To fix this, I simply have to set the correct color for each trophy in
case 25 of entityclass::createentity(). I could fix it in
Graphics::setcol() itself, but custom levels might depend on those
certain colors being the way they are, so it's a safer bet to just fix
it in the trophy creation case itself.
The diff of this might look weird. Even though all I'm doing is changing
some value assignments around, it looks like the "patience" algorithm
thinks I'm moving a whole case of the trophy switch-case around.
So... it looks like being able to switch through tilesets backwards has
been in 2.3 for a while, guess no one just uses 2.3 or the level editor
that much. It seems like it's always been broken, too.
If you were on the Space Station tileset (tileset 0), pressing Shift+F1
would keep you on the Space Station tileset instead of switching to the
Ship (tileset 4).
It looks like the problem here was mixing size_t and int together - so
the modulus operation promoted the left-hand side to size_t, which is
unsigned, so the -1 turned into SIZE_MAX, which is 18446744073709551615
on my system. You'll note that that ends in a 5, so the number is
divisible by 5, meaning taking it modulo 5 leads to 0. So the tileset
would be kept at 0.
At least unsigned integer underflow/overflow is properly defined, so
there's no UB here. Just careless type mixing going on.
The solution is to make the modulus an int instead of a size_t. This
introduces an implicit conversion, but I don't care because my compiler
doesn't warn about it, and implicit conversion warnings ought to be
disabled on MSVC anyway.
This fixes a bug where if you entered a tower before watching the
credits sequence, the credits sequence would have mismatched text and
background colors.
This bug happened because entering a tower modified the r/g/b attributes
of mapclass, and updated graphics.towerbg, without updating
graphics.titlebg too. Then gamecompleterender() uses the r/g/b
attributes of mapclass.
The solution is to put the r/g/b attributes on TowerBG instead. That
way, entering a tower will only modify the r/g/b attributes used to
render towers, and won't affect the r/g/b attributes used to render the
credits sequence.
Additionally, I also de-duplicated the case-switch that updated the
r/g/b attributes based off of the current colstate, because it got
copy-pasted twice, leading to three instances of one piece of code.
This fixes a bug where if you completed a custom level during
command-line playtesting, when returning to the title screen, the
background would be red and the text would be white.
This is because playtesting skips over the code path of pressing ACTION
to start the game and advance to the title screen, and the code path of
that ACTION press specifically initializes the title screen colors to
cyan.
This is also caused by the fact that completing a custom level doesn't
call map.nexttowercolour(), but my guess is that the intent there was
that the player would select a custom level, complete it, and return to
the title screen on the same screen with the same colors, so I decided
not to add a map.nexttowercolour() there.
Instead, I've moved the cyan color initialization to main(), so that it
is always executed no matter what, and doesn't require you to take a
specific code path to do it.
With commit 48313169b6 (PR #453),
AllyTally added a single-case patch for a regression, instead of fixing
it at its root cause.
In fact, that commit only fixes the music if Presenting VVVVVV is
playing while exiting to the menu, not if you enter a level that plays
Presenting VVVVVV - so it only fixes it going one way, and not going the
other way around; neither fixing also all the other cases this could
happen.
It doesn't, say, fix the case where you are exited to the menu
automatically after collecting the last crewmate in the level (or if the
level calls gamestate 1013 itself), which is what happens in my MIRA-VIU
TAS video at the end, and which I noted in the description of that video
( https://www.youtube.com/watch?v=OYQO4ePbYW4&t=111 ).
So, the problem here is that when musicclass::play() is called, it sees
that currentsong is the same as its input, and decides that since the
music is already playing, it shouldn't play the music again. Thus, the
music fades out, and we get silence instead of the music playing again.
But I said this was a regression. Why didn't this happen in 2.2? Well,
it's because of the fact that 2.2 sets currentsong to -1 (no music
playing at all) immediately when starting a fadeout, and not when the
fadeout completes (commit facb079b35,
PR #316). As you can imagine, this discrepancy could lead to bugs, given
that the game would think that music wasn't playing when in actuality it
was, but fixing this bug could also break code that expected this wrong
behavior. And in this case, it has.
So to properly fix the root cause of this, instead of naïvely
single-case patching out every case that comes up randomly, in
musicclass::play(), the function will now ignore if the input given is
the same as currentsong if the music is currently fading out.
This reverts commit 48313169b6, "Don't
fade music out when returning to the menu if it's Presenting VVVVVV".
This commit is being reverted because it is only a single-case patch -
that is, it fixes only a single symptom of the bug, and not its
underlying cause.
This is also another conditional where the rest of the function is
nested. Furthermore, in order to not repeat ourselves, I've also decided
to unconditionally assign currentsong to t, because if t is -1
currentsong gets assigned to -1 anyway - so it's the same thing, but
it's much easier to see and think about.
This removes an indentation level, and makes it easier to reason about
the function since you essentially now view it as the function returning
right there.
This prevents issues when calling std::abs with a float on some older
compilers. While it would normally be promoted to an int, std::abs is
special due to being overloaded despite being a C function. This can
cause errors due to the compiler being unable to find a float overload.
SDL_abs doesn't have this problem, since it's a normal C function.
When gamemode(teleporter) gets run in a script, it brings up a read-only
version of the teleporter screen, intended only for displaying rooms on
the minimap.
However, ever since 2.3 allowed bringing up the map screen during
cutscenes (in order to prevent softlocks), bringing up the map screen
during this mode would (1) do an unnecessary animation of suddenly
switching back to the game and bringing up the menu screen again (even
though the menu screen has already been brought up), and (2) would let
you close the menu entirely and go back to GAMEMODE, thus
unintentionally closing the teleporter screen and kind of ruining the
cutscene.
To fix this, when you bring up the map screen, it will instead instantly
transition to the map screen. And when you bring it down, it will also
instantly transition back to the teleporter screen.
But that's not all. The previous behavior was actually kind of a nice
failsafe, in that if you somehow got stuck in a state where a script ran
gamemode(teleporter), but stopped running before it could take you out
of that mode by running gamemode(game), then you could return to
GAMEMODE yourself by bringing up the map screen and then bringing it
back down. So I've made sure to keep that failsafe behavior, only as
long as there isn't a script running.
When bringing up the map screen, the game does a small menu animation
where the menu comes in from the bottom. The code to calculate the menu
offset is copy-pasted everywhere, so I thought I'd de-duplicate it to
make my life easier when working with it. I also included the
game.gamestate assignment in the de-duplicated function, so it would be
easier for a future bugfix.
At the same time, I'm also removing all the BlitSurfaceStandard()s that
copied menubuffer to backBuffer. The red flag is that this blit happened
for every single entry point to MAPMODE and TELEPORTERMODE, except for
the script command gamemode(teleporter). Pressing Enter to bring up the
map screen, pressing Enter to quit the Super Gravitron, pressing Esc to
bring up the pause screen, and pressing Enter to bring up the teleporter
screen all do this blit, so if this blit was there to fix a bug, then
there's a bug with using the script command gamemode(teleporter)... but,
as far as I can tell, there isn't.
That's because the blit basically does nothing. All the blit does is
copy menubuffer onto backBuffer. Then the next thing that happens is
that either maprender() or teleporterrender() will be called, and the
first thing that those functions will always do is fill backBuffer with
solid black, completely overriding the previous blit. So that's why
removing this blit won't have any effect, and it can be safely removed
for code clarity.
When I did #569, I forgot that taking out the code path that set the
player's invis to false meant that the player would still be invisible
upon loading back in to the game if they exited the game while
invisible. Taking out that code path also meant that if game.lifeseq was
nonzero, it wouldn't be reset properly, either. So this fixes those
things.
When I did #567, I didn't test it. And I should have tested it, because
it made the player invisible. This is because map.resetplayer() also
sets the invis attribute of the player to true as well, and I only undid
it setting game.lifeseq to 10.
So instead, I'll just add a flag to map.resetplayer() that by default
doesn't set game.lifeseq or the player's invis attribute. And I tested
it this time, and it works fine. I tested both respawning after death
and exiting to the menu and loading in the game again.
When exiting a level, music.init() gets called again, and every time it
gets called after the first time it gets called, it will free all music
tracks.
To do so, it calls Mix_FreeMusic(). Unfortunately, if there is music
fading, Mix_FreeMusic() will call SDL_Delay(), which will result in
annoying no-draw frames. Meaning, the screen freezes and doesn't draw
anything, and has to wait a bit before continuing.
Here's the relevant piece of code from SDL2_mixer's music.c:
if (music == music_playing) {
/* Wait for any fade out to finish */
while (music->fading == MIX_FADING_OUT) {
Mix_UnlockAudio();
SDL_Delay(100);
Mix_LockAudio();
}
if (music == music_playing) {
music_internal_halt();
}
}
This is especially annoying if you're a TASer, because no-draw frames in
a libTAS movie aren't guaranteed to last for a consistent number of
frames when you change your inputs around.
After this patch, as long as your computer can unmount and re-mount
assets fast enough (it doesn't seem like mine can, unfortunately), then
you won't get any freezes when exiting a level that has custom assets.
(This freeze didn't happen when loading a level because the title screen
music fadeout upon pressing ACTION had enough time to fully complete
before the level got loaded.)
There's a small inconsistency where the first time you load in to the
game, game.lifeseq is at 0, but when you exit to the menu and load in
again, game.lifeseq becomes 10. This is visible as Viridian blinking
when loading in only after the first time you load in, and this also
means that after the first time you load in, you also have to wait 5
frames before being able to move Viridian.
The reason for this inconsistency is because on the first time you load
in to the game, there are no entities loaded in obj.entities yet, so the
game creates a player entity, and doesn't mess with game.lifeseq. When
you exit and then load in for the second time, obj.entities contains at
least one entity (all the entities from the room you just exited out of
- map.gotoroom() hasn't even been called yet, so it doesn't even check
for only the player entity), so the game calls map.resetplayer()
instead, and map.resetplayer() sets game.lifeseq to 10.
There's even an inconsistency to this inconsistency - when you die in No
Death Mode, all entities will be removed from obj.entities, so the next
time you load in to the game, game.lifeseq will be 0.
This inconsistency is pretty minor in the grand scheme of things, but
it still bothers me, so I'm going to fix it.
Since INTERIM_COMMIT is a char array whose size we know for sure at
compile time, and which we also know is an array (instead of being a
pointer), we can take the SDL_arraysize() of it. However,
SDL_arraysize() doesn't account for the null terminator unlike
SDL_strlen(), so we'll have to do it ourselves. But at least we are
guaranteed to get a constant value at compile time, unlike if we use
SDL_strlen(), which would be repeatedly evaluating a constant value at
runtime.
To my knowledge, there's no equivalent SDL_arraysize() for constant
strings, and a quick `rg` (ripgrep) for "sizeof" in the SDL include/
folder doesn't show anything like that. So we'll just have to use the
SDL_arraysize() - 1 and deal with it.
The previous implementation of showing the commit hash on the title
screen used a preprocessor definition added at CMake time to pass the
hash and date. This was passed for every file compiled, so if the date
or hash changed, then every file would be recompiled. This is especially
annoying if you're working on the game and switching branches all the
time - the game has at least 50 source files to recompile!
To fix this, we'll switch to using a generated file, named
Version.h.out, that only gets included by the necessary files (which
there is only one of - Render.cpp). It will be autogenerated by CMake
(by using CONFIGURE_FILE(), which takes a templated file and does a
find-and-replace on it, not unlike C macros), and since there's only one
file that includes it, only one file will need to be recompiled when it
changes.
And also to prevent Version.h.out being a required file, it will only be
included if necessary (i.e. OFFICIAL_BUILD is off). Since the C
preprocessor can't ignore non-existing include files and will always
error on them, I wrapped the #include in an #ifdef VERSION_H_EXISTS, and
CMake will add the VERSION_H_OUT_EXISTS define when generating
Version.h.out. The wrapper is named Version.h, so any file
that #includes the commit hash and date should #include Version.h
instead of Version.h.out.
As an added bonus, I've also made it so CMake will print "This is
interim commit [HASH] (committed [DATE])" at configure time if the game
is going to be compiled with an interim commit hash.
Now, there is also the issue that the commit hash change will only be
noticed in the first place if CMake needs to be re-ran for anything, but
that's a less severe issue than requiring recompilation of 50(!) or so
files.
While working on #535, I noticed this bug.
When going to Graphic Options or Game Options from the pause menu,
kludge_ingametemp was intended to save the current menu stack frame
BEFORE either of those menus got created. However, it was actually
assigned afterwards, meaning kludge_ingametemp would always be either
Menu::graphicoptions or Menu::options.
This meant that the returntomenu() in returntopausemenu() would always
attempt to return to the current in-game menu, and seeing as it's the
same menu, would re-create the menu, instead of returning to the
previous menu before it.
This patch also fixes a potential source of a trivial memory leak, if
someone were to keep entering and exiting Graphic Options or Game
Options from the pause menu. It would keep piling up duplicate Graphic
Options or Game Options stack frames, which would never get removed.
However, they do get removed when you exit to the menu properly, by
returntomenu() again, so this doesn't seem like that serious of an
issue, but it's still good to fix.
While I was working on #535, I noticed that all the call sites of
script.run() have the exact same code, namely:
if (script.running)
{
script.run();
}
I figured, why not move the script.running check into the function
itself? That way, we won't have to duplicate the check every single
time, and we don't risk forgetting to add the check and causing a bug
because of that.
The check was already duplicated once since 2.0 (it's used in both
GAMEMODE and TELEPORTERMODE), and with the fix of the two-frame delay in
2.3, it's now duplicated twice, leading to THREE instances of this check
in the code, when there should be only one.
To fix this bug, all we have to do is just pass the existing
ScreenSettings* that we have in loadstats() to savestats(), and in
loadsettings() to savesettings().
Fixes#556. Depends on #558.
Another step to fix the bug #556 is to allow Game::savestats() to accept
a pointer to an existing ScreenSettings struct. This entails refactoring
Game::savesettings() and Game::serializesettings() to accept the
function as well, along with adding Screen::GetSettings() so the
settings of the current Screen can be easily grabbed.
In order to be able to fix the bug #556, I'm planning on adding
ScreenSettings* to the settings.vvv write function. However, that
entails adding another argument to Game::savesettings(), which is going
to be really messy given the default argument of Game::savestats().
That, combined with the fact that the code comment at the site of the
implementation of Game::savestats() being wrong (!!!), leads me to
believe that using default function arguments here isn't worth it.
Instead, what I've done is made it so callers are explicit about whether
or not they're calling savestats(), savesettings(), or both at the same
time. If they are calling both at the same time, then they will be using
a new function named savestatsandsettings().
In short, these are the interface changes:
* bool Game::savestats(bool) has been removed
* bool Game::savestatsandsettings() has been added
* void Game::savestats_menu() has been renamed to
void Game::savestatsandsettings_menu()
* All previous callers of bool Game::savestats() are now using bool
Game::savestatsandsettings()
* The one caller of bool Game::savestats(bool) is now using bool
Game::savestats()
While there already exists an option to skip the fake loading screen
entirely (without requiring an ACTION press), there are several reasons
for including this option as well:
* So people upgrading from 2.2 won't have to sit through the fake
loading screen the first time they open 2.3.
* So if people are too lazy to use the existing option, they can use
this one instead.
* So tool-assisted speedruns (TASes) of this game can skip the fake
loading screen without requiring an existing settings.vvv beforehand.
This last one is the biggest reason for me, since I'm not sure what
TASVideos.org rules are regarding existing save files, but with this
change nobody has to worry about their rules and can safely just
press ACTION to skip the fake loading screen automatically.
`success = success && savesettings();` is now changed to
`success &= savesettings();`. It's bitwise, and I think C++ should have
had a &&= for completeness, but it shouldn't matter here.
Changing settings would most of the time attempt to save unlock.vvv and
now also settings.vvv, but there would be no feedback whether the files
have been saved successfully or not. Now, if saving fails when changing
settings in the menu, a warning message will be shown. The setting will
still be applied of course, but the user will be informed it couldn't
be saved. This message can be silenced until the game is restarted,
because I can imagine this could get very annoying when someone already
knows their settings aren't writeable.
Also, some options didn't even save settings in the first place. These
are turning off invincibility, and by coincidence precisely all the
options in the advanced options menu. I made sure these options now do
so.
As part of fixing #464, I'll need to move these pieces of code around
easily. In #220 I just kind of shoved them awkwardly in whatever
fixed function would be last called in the gamestate loop, which I
shouldn't have done as I've now had to make formal fixed-render
functions anyway. Because these fixed functions need to be called
directly before a render function, and I'm fixing the order to put
render functions in their proper place, so I need to be able to move
these around easily, and making them function calls instead of inlined
makes them easier to manipulate.
Today, I saw a video posted by Chelito on the VVVVVV speedrunning
Discord where he died inside a gravitron square over and over after the
Gravitron in Intermission 2 ended.
https://cdn.discordapp.com/attachments/234787368522088448/779074864660480020/What.mp4
This is caused by the fact that after the Gravitron ends, the game no
longer considers you to be inside swnmode, so it won't move the enemies
offscreen when you die.
To fix this, after the Gravitron ends, the game will switch to swngame
8, where it will keep you inside swnmode until all gravitron squares are
offscreen. This means that gravitron squares that are onscreen after the
Gravitron ends will be moved offscreen if you die, preventing the above
death loop from happening.
PR #468 made it so you can use the menus while in a cutscene, in order
to counteract softlocks. However, this has resulted in more
unintentional behavior:
- `gamemode(teleporter)` breaks when opening the ENTER menu (Misa
mentioned this)
- The player can now interrupt shakes and walks, and have their timers
run out before resuming the cutscene
- After completing the game, the player can warp to the ship while a
dialogue is active, and prevent themselves from advancing text (plus
it's always rude to just teleport away while someone's talking)
- The player can peek at the map before hidecoordinates is run, and can
also peek at what the game does with missing/rescued crewmates during
cutscenes
This commit fixes the latter two issues. While a script is running,
only the SAVE tab is now available. Therefore the player can still get
themselves out of softlocks as intended, but they do things like
looking at the map or teleporting away during a cutscene.
It wasn't a direct duplicate of key.sensitivity, but it was still
basically the same thing. Although to be fair, at least the case-switch
conversion didn't get duplicated everywhere unlike game.slowdown.
So now key.sensitivity functions the same as game.controllerSensitivity,
and it only gets converted to its actual value whenever a joystick input
happens in key.Poll(), unlike previously where it got converted every
single frame on the title screen (there was even a comment that said
"TODO bit wasteful doing this every poll").
game.gameframerate seems to exist for converting the value of
game.slowdown into an actual timestep value, when really the timestep
value should just use game.slowdown directly with a fast lookup table.
Otherwise, there's a bunch of duplicated game.slowdown case-switches
everywhere, which adds up to a large, annoying pile should the values be
changed in the future. But now the duplicate variable has been removed,
and with it, all the copy-pasted case-switches.
Also, the game speed text rendering in Menu::accessibility and
Menu::setslowdown has been factored out to a function and de-duplicated
as well.
There were some duplicate Screen configuration variables that were on
Game, when there didn't need to be.
- game.fullScreenEffect_badSignal is a duplicate of
graphics.screenbuffer->badSignalEffect
- game.fullscreen is a duplicate of !graphics.screenbuffer->isWindowed
- game.stretchMode is a duplicate of graphics.screenbuffer->stretchMode
- game.useLinearFilter is a duplicate of
graphics.screenbuffer->isFiltered
These duplicate variables have been removed now.
I put indentation when handling the ScreenSettings struct in main() so
the local doesn't live for the entirety of main() (which is the entirety
of the program).
Apparently, the amount of digits in a commit hash that git will output
varies depending on how many objects are in the repository that the hash
gets pulled from. The more objects, the more digits needed to avoid a
hash collision.
Sources:
https://stackoverflow.com/q/18134627/#comment26560283_18134919https://stackoverflow.com/a/21015031/
So that means we'll have to dynamically account for the length of the
commit hash in order to get it properly right-aligned with the rest of
the text.
For some reason, music.usingmmmmmm automatically gets set to true in
musicclass::init(). I assume this was because it would get re-assigned
by game.usingmmmmmm in the game startup code anyway, but now that
musicclass::init() can be called more than once, this variable will just
get set to true when it shouldn't be, causing a confusing desync just
like the one I described in my previous commit, where you would have
PPPPPP or MMMMMM on the title screen, but closing the game and
re-launching it would play the other soundtrack instead.
Again, these duplicate variables should be removed, but that's going to
be a separate patch. In the meantime, I'm removing this variable
assignment.
musicclass::init() re-initializes every attribute of musicclass
unnecessarily, when initialization should be put in a constructor
instead. This is bad, because music.init() gets called whenever we enter
and exit a custom level that has assets.
Otherwise, this would result in a bug where music.usingmmmmmm would be
reset, causing you to revert to PPPPPP on the title screen whenever you
enter a level with MMMMMM selected and exit it.
This also causes a confusing desync between game.usingmmmmmm and
music.usingmmmmmm since the values of the two variables are now
different (these duplicate variables should probably be removed, too,
and a lot of other duplicate variables like these exist, too, which are
a real headache). Which means despite MMMMMM playing on the title
screen, exiting the game and re-launching it will play PPPPPP instead.
What's even more is that going to game options and switching to PPPPPP
will play PPPPPP, but afterwards launching and re-entering will play
MMMMMM. Again, having duplicate variables is very bad, and should
probably be fixed, but that's a separate patch.
...you die and the platform's x-coordinate is to the left of x=152.
Which means if you die and the platform isn't completely clear of the
space of its adjacent disappearing platform.
The block needs to be updated accordingly with calls to
obj.nocollisionat() and obj.moveblockto(), else the block will simply be
left behind and the platform will no longer have any collision. This is
in contrast to 2.2 behavior, where the platform would simply
unconditionally create a new block, which would actually end up with a
duplicate block since the previous block didn't get cleaned up, but this
didn't cause any problems because the room was carefully designed so you
would never be able to touch that previous block after you died and
respawned at the checkpoint. But it's still there.
I also added comments to document what this kludge code did, because
otherwise it would be mysterious to readers who are unfamiliar with it.
Fixes#543.
What's the difference between a slash sign and a percent sign? Well, a
percent sign is just a slash sign with two extra oranges in between, but
those two oranges make a huuuuge difference...
I can't really make the filter update only every timestep, because it's
per-pixel and operates on deltaframes too, so it TECHNICALLY runs faster
in over-30-FPS mode than not. That said, it's not really noticeable, the
filter doesn't look bad for updating more often or anything. However, I
can at least interpolate the scrolling, so it's smooth in over-30-FPS
mode.
Originally this function was made because it needed to be exported to
gameinput(), but this piece of code is actually also used in
gamecompletelogic(). So it's good to de-duplicate it here, too.
Assigning these variables is now wholly unnecessary ever since #522 got
merged, and in fact setting graphics.backgrounddrawn to false actually
causes the warp background to "skip" when the map screen gets closed. So
this fixes that bug, too.
This kludge variable was used to re-set the warp background after coming
back from the in-game settings menus. But since #522 got merged, this
has no longer been necessary.
This check is clearly meant for destroying the factory clouds in the
room "Level Complete!" in the main game, but it covers all rooms on row
8, instead of only (13,8). Adding an x-room check restricts this
behavior to only (13,8).
Trinket9 reported that this weird behavior of destroying specifically
above y-position 60 was undesirable, since they were creating an enemy
with this `behave` in a room on row 8 and it kept disappearing
instantly.
First, the variable has been inverted, because it's bad practice to have
booleans with negative names. Secondly, instead of magically setting a
signaling variable when calling fadeout(), fadeout() now has a parameter
to set the quick_fade attribute, which is much cleaner than doing the
magical assignment that could potentially look unrelated.
fadeoutqueuesong basically does the same thing as nicechange - they both
queue a song to be played when the current track is done fading out.
Except, for some reason, I decided to add fadeoutqueuesong instead of
using the existing nicechange/nicefade system.
This has consequences where fadeoutqueuesong would step on the toes of
nicechange. In the case of #390, nicechange would say "let's play
Potential for Anything" when entering the Super Gravitron, but
fadeoutqueuesong had previously said "let's play Pipe Dream" because of
the player having just exited the Super Gravitron. fadeoutqueuesong took
priority because it came first in musicclass::processfade(), and when it
called play(), the Mix_PlayingMusic() in the nicechange check afterwards
would say music would already be playing at that point, so the
nicechange wouldn't take effect.
In the end, the solution is to just merge the new system into the
already-existing system.
Fixes#390.
Just looked over this and had to do a double-take. It should be
num_mmmmmm_tracks, not num_pppppp_tracks, because MMMMMM comes first in
the vector of music tracks.
Here's what causes #401: After the fade to menu delay ticks down to 0,
the game calls game.quittomenu(), but the rest of mapinput() still
executes. This means that the block that detects your ACTION press gets
executed, because there's a check that fadetomenudelay is less than or
equal to 0, and, well, it is.
So if you've pressed ACTION on the exact frame that it counts down to 0,
then the game detects your ACTION press, then processes it accordingly,
and then sets the fadetomenudelay, which means it'll get reactivated the
next time you open the map screen. But at this point, you get sent to
TITLEMODE, because game.quittomenu() set game.gamestate accordingly.
(This is why resetting game.fadetomenu or game.fadetomenudelay in
game.quittomenu() or script.hardreset() won't fix this bug.)
The solution here is to add a game.fadetomenu check to the ACTION press
processing.
Same-frame state transition logic is hard... actually, any sort of thing
where two things happen on the same frame is really annoying.
This also applies to fadetolab and fadetolabdelay, too.
Fixes#401.
The game previously did this dumb thing where it lumped in all its
settings with its file that tracked your records and unlocks,
`unlock.vvv`. It wasn't really an issue, until 2.3 came along and added
a few settings, suddenly making a problem where 2.3 settings would be
reset by chance if you decided to touch 2.2.
The solution to this is to move all settings to a new file,
`settings.vvv`. However, for compatibility with 2.2, settings will still
be written to `unlock.vvv`.
The game will prioritize reading from `settings.vvv` instead of
`unlock.vvv`, so if there's a setting that's missing from `unlock.vvv`,
no worries there. But if `settings.vvv` is missing, then it'll read
settings from `unlock.vvv`. As well, if `unlock.vvv` is missing, then
`settings.vvv` will be read from instead (I explicitly tested for this,
and found that I had to write special code to handle this case,
otherwise the game would overwrite the existing `settings.vvv` before
reading from it; kids, make sure to always test your code!).
Closes#373 fully.
This fixes a deltaframe glitch where the "- Press ENTER to Teleport -"
prompt would show up for a split second if you exited the game while the
prompt was fully faded in, and then re-entered it.
cppcheck said: "Logical disjunction always evaluates to true".
Yes. Yes it does. Whoops. I learned how to specify ranges like this in
high school math and still screw it up...
In C++, when you have two variables in different scopes with the same
name, the inner scope wins. Except you have to be really careful because
sometimes they're not (#507). So it's better to just always have unique
variable names and make sure to never clash a name with a variable in an
outer scope - after all, the C++ compiler and standard might be fine
with it, but that doesn't mean humans can't make mistakes reading or
writing it.
Usually I just renamed the inner variables, but for tx/ty in editor.cpp,
I just got rid of the ridiculous overcomplicated modulo calculations and
replaced them with actual simple modulo calculations, because the
existing ones were just ridiculous. Actually, somebody ought to find
every instance of the overcomplicated modulos and replace them with the
actual good ones, because it's really stupid, quite frankly...
Whenever you delete all your save data, your settings aren't changed at
all, and you could resave them if you fiddled with a setting somewhere.
But the full game doesn't count Flip Mode as a setting, instead it
counts it as an unlock. This means deleting your save data would unset
Flip Mode in M&P, which would seem weird because in M&P it's just a
simple setting.
For consistency, Flip Mode shouldn't be unset when deleting save data in
M&P.
This commit fixes a bug that also sometimes occurred in 2.2, where the
teleporter sprite would randomly turn into a solid color and just be a
solid circle with no detail.
Why did this happen? The short answer is an incorrect lower bound when
clamping the teleporter sprite index in `Graphics::drawtele()`. The long
answer is bad RNG with the teleporter animation code. This commit fixes
the short answer, because I do not want to mess with the long answer.
So, here is what would happen: the teleporter's `tile` would be 6. The
teleporter code decrements its `framedelay` each frame. Then when it
reached a `framedelay` of 0, it would call `fRandom()` and essentially
ask for a random number between 0 and 6. If the RNG ended up being
greater than or equal to 4, then it would set its `walkingframe` to -5.
At the end of the routine, the teleporter's `drawframe` ends up being
its `tile` plus its `walkingframe`. So having a `walkingframe` of -5
here is fine, because its `tile` is 6.
Until it isn't. When its `tile` becomes 2, it still keeps its
`walkingframe` around. The code that runs when its `tile` is 2 does have
the possibility of completely resetting its `walkingframe` to be in
bounds (in bounds after its `tile` is added), but that only runs when
its `framedelay` is 0, and in the meantime it'll just use the previous
`walkingframe`.
So you could have a `walkingframe` of -5, plus a `tile` of 2, which
produces a `drawframe` of -3. Then `Graphics::drawtele()` will clamp
that to 0, which just means it'll draw the teleporter backing, and the
teleporter backing is a simple solid color, so the teleporter will end
up being completely and fully solid.
To fix this, I just made `Graphics::drawtele()` clamp to 1 on the lower
bound, instead of 0. So if it ever gets passed a negative teleporter
index, it'll just draw the normal teleporter sprite instead, which is
better.
This fixes the draw order by drawing all other entities first, before
then drawing all humanoids[1] after, including the player afterwards.
This is actually a regression fix from #191. When I was testing this, I
was thinking about where get a crewmate in front of another entity in
the main game, other than the checkpoints in Intermission 1. And then I
thought about the teleporters, because I remember the pre-Deep Space
cutscene in Dimension Open looking funny because Vita ended up being
behind the teleporter. (Actually, a lot of the cutscenes of Dimension
Open look funny because of crewmates standing behind terminals.)
So then I tried to get crewmates in front of teleporters. It actually
turns out that you can't do it for most of them... except for Verdigris.
And then that's what I realized why there was an oddity in WarpClass.cpp
when I was removing the `active` system from the game - for some reason,
the game put a hole in `obj.entities` between the teleporter and the
player when loading the room Murdering Twinmaker. In a violation of
Chesterton's Fence (the principle that you should understand something
before removing it), I shrugged it off and decided "there's no way to
support having holes with my new system, and having holes is probably
bad anyway, so I'm going to remove this and move on". The fact that
there wasn't any comments clarifying the mysterious code didn't help
(but, this *was* 2.2 code after all; have you *seen* 2.2 code?!).
And it turns out that this maneuver was done so Verdigris would fill
that hole when he got created, and Verdigris being first before the
teleporter would mean he would be drawn in front of the teleporter,
instead of being behind it. So ever since
b1b1474b7b got merged, there has actually
been a regression from 2.2 where Verdigris got drawn behind the
teleporter in Murdering Twinmaker, instead of properly being in front of
it like in 2.2 and previous.
This patch fixes that regression, but it actually properly fixes it
instead of hacking around with the `active` system.
Closes#426.
[1]: I'm going to go on a rant here, so hear me out. It's not explicitly
stated that the characters in VVVVVV are human. So, given this
information, what do we call them? Well, the VVVVVV community (at least
the custom levels one, I don't think the speedrunning community does
this or is preoccupied with lore in the first place) decided to call
them "villis", because of the roomname "The Villi People" - which is
only one blunder in a series of awful headcanons based off of the
assumption that the intent of Bennett Foddy (who named the roomnames)
was to decree some sort of lore to the game. Another one being
"Verdigris can't flip" because of "Green Dudes Can't Flip". Then an OC
(original character) got named based off of "The Voon Show" too. And so
on and so forth.
"Humanoid" is just a word for "crewmate or player" but without having to
say "crewmate or player". This is just to make it so humanoids get drawn
after all other entities get drawn, meaning humanoids will be drawn on
top.
I'm going to refactor drawing an entity out to a separate function, and
since I'm going to do that, I might as well make some things const to
clarify intent first and foremost and possibly improve performance or
compiler optimization.
My previous custom level forwards compatibility would only work if you
saved to the same filename as you read from. But what if you saved to a
new filename? Well, your extra XML is lost.
Not to worry, I've introduced a variable that remembers the filepath of
the currently-loaded level (the existing `filename` attribute is kind of
weird and not really suited for this purpose, so). I tried to make it a
simple `const char*`, but it turns out that's bad when you take the
`c_str()` of an `std::string` that then gets destroyed, so it's best to
use `std::string` in an `std::string` world.
So now when you save a level, it'll attempt to open the original file,
and if that doesn't exist then your extra XML gets lost anyway, but I
shouldn't be expected to keep your XML if you delete the original file.
Custom level files now have forwards compatibility - except that some
XML objects will simply discard contents and attributes they don't see
fit. For instance, edentities and level properties will not preserve
newer attributes or contents.
This is because preserving them would require having to track the XML
object as part of the edentity internally, because the edentity might
change places or even be deleted throughout the course of editing
someone's level.
I opted to not add support for preserving objects like these, because
frankly, the put-everything-in-one-file level format was and still is a
terrible idea, and we should probably switch to a new format in the
future that isn't single-file. So when that happens, there won't be a
need to preserve XML attributes on edentities.
When I encountered this function, I asked myself, why make a dedicated
function instead of casting to int?
Well, as it turns out, you can't just cast to int, because you have to
convert it to a string by doing help.String(number).c_str(), like all
the other ints. So it's actually more wasteful to do it the normal way
instead of using BoolToString().
That is, until my recent changes came along and made it so that you can
just provide an int and it'll automatically be converted to a string, no
questions asked. Now, it's more optimal to do a straight cast to int
instead of having to go through a middleman function. So this function
is getting axed in favor of casting to int instead.
This file is probably the biggest one, as there will be more settings
added in the future and we don't want people's settings to be erased. Of
course, this file will be migrated to a settings.vvv sometime later in
2.3 in order to prevent 2.2 from erasing 2.3 settings.
These XML functions will be useful for de-duplicating copy-pasted XML
handling code, while also making it so elements will get updated in
place instead of being thrown out and starting from scratch every time a
file is saved.
Now that tower, title, and horizontal/veritcal warp backgrounds all use
separate buffers, there's no longer any need to temporarily store
variables as a workaround for the buffers stepping on each other.
Instead of using the same tower buffer that gets used for towers, use a
separate buffer instead so there's no risk of stepping on the tower
buffer's toes at the wrong point in time.
This commit combined with the previous one fixes#369.
With the previous commit in place, we can now simply move some usages of
the previous towerbg to use a separate object instead. That way, we
don't have to mess with a monolithic state, or some better way to phrase
what I just said, and we instead have two separate objects that can
coexist side-by-side.
Previously, the tower background was controlled by a disparate set of
attributes on Graphics and mapclass, and wasn't really encapsulated. (If
that's what that word means, I don't particularly care about
object-oriented lingo.) But now, all relevant things that a tower
background has has been put into a TowerBG struct, so it will be easy to
make multiple copies without having to duplicate the code that handles
it.
Yet another set of temporary variables is on a global class when they
shouldn't be. These two are only used in tower background functions and
are never used anywhere else, so they're clearly temporaries.
For some reason, this `tl` is a `point`? But the only other time the
name `tl` is used elsewhere in the code is a float on a `textboxclass`.
Regardless, this is unused.
This function was only used in assigments to mapclass::towercol. But
that variable is unused, and has been removed, so after removing that
variable, this one is unused, too.
On the deltaframes of the tower background, there would be "pixel bleed"
if the tower background would be scrolling from the top. This is because
there wouldn't be any more pixels from above the screen to grab, because
the background rendering functions didn't draw any pixels above the
screen. But they couldn't draw any pixels above the screen, because that
was simply the end of the buffer. But now that the buffer is expanded,
we can now draw above the screen, and fix this glitchy interpolation
rendering.
In order to fix the weird title screen pixels at the top on deltaframes,
we'll need to have a bit more space at the top. Also to the left, in
case we need a background to scroll from the left in the future.
These commands now use the INBOUNDS_ARR() macro to convey intent, and to
make sure that if the size of the array changes in the future, that the
bounds check wouldn't end up being wrong. Also fixed some code style for
the flag() and ifcrewlost() commands.
Scripting crewmates apparently have a specific hardcoded rule in their
follow-player code that makes it so if they're in (10,5) and are to the
left of the line x=155, they will refuse to continue following the
player. This was clearly done to make it so Vitellary in the main game
wouldn't overlap the teleporter, and that was clearly done to make it so
it wouldn't look like he would go behind the teleporter, which would
look weird (I also noticed this in #513).
I stumbled across this code and thought that just like other weird
main-game code that shouldn't apply in custom levels (#136, #137, #144),
this should be fixed, too.
The window icon is simply another asset that can be customized by level
makers. And in fact, one of my levels changes the window icon. It's
simply named VVVVVV.png, but it doesn't sit in the graphics folder,
rather it sits in the root VVVVVV directory.
I noticed that this asset was missed when per-level assets loading was
added, so I decided to add it in.
There's a NULL check on screenbuffer because reloadresources() gets
called before screenbuffer's init() does.
The intent of #504 was to make it so oldxp/oldyp would never be messed
with for over-30-FPS stuff, but I forgot that I changed these
assignments in my over-30-FPS patch when I was doing #504. So these
assignments have been restored to the way they were in 2.2, and is
fixed now.
While my previous commit fixes the glitchy y-position when you get stuck
inside a conveyor, I noticed that getting inside a conveyor seems to
always push the player out, despite conveyors sharing the same code with
moving platforms, which has code to temporarily disable their own
collision when the player gets stuck inside them, so that the player
DOESN'T get pushed out.
Well, it turns out that the reason this happens is because conveyors in
a room that get placed during mapclass::loadlevel() get tile 1 placed
underneath them. This is mostly so moving platforms will collide with
them, because otherwise platforms don't collide with other platforms,
and a conveyor is considered a platform.
This means that a conveyor without any tiles behind it will simply get
the player stuck if they get inside it, and the player won't be pushed
out. This is bad, because conveyors don't move, so they'll be stuck
there forever until they press R (or save, quit, and load). This
situation doesn't come up in the main game, but it COULD come up in
custom levels that use the internal createentity() command to create
conveyors that don't have any tiles behind them.
It seems good to fix this as well, while we're at it fixing conveyor
physics, so I'm fixing this as well.
There is this issue with conveyors where if you collide with them, your
intended next y-position doesn't get updated to the position of the
conveyor, and then your y-position gets set to your intended next
y-position. This also applies to horizontally moving platforms.
This bug used to not produce any problems, if at all, until #502 got
merged. Since then, respawning from checkpoints that are on conveyors
would sometimes not update your y-position at all, making it possible to
get stuck inside a death loop that would require you to exit the game
and re-enter it.
But you can always reliably create this bug simply by going into the
editor and placing down a conveyor and checkpoint on top of each other.
Then enter and exit playtesting a bunch of times, and you'll notice the
glitchy y-position Viridian keeps taking on.
The root cause of this is how the game moves the player whenever they
stand on the top or bottom of a conveyor (or a horizontally moving
platform). The game sets their intended next x-position (newxp), then
calls obj.entitymapcollision() on them. This would be okay, except their
intended next y-position (newyp) doesn't get set along with their newxp,
so entitymapcollision() will use the wrong newyp, then find that there
is nothing that will collide with the player at that given newyp, then
update the yp of the player to the wrong newyp.
So, the platform logic simply doesn't set the player's newyp. Why does
the player have the wrong newyp? It's because moving platforms (and
conveyors) are updated first before all other entities are, and this
includes the code that checks the player for collisions with moving
platforms. That's right: the moving platform collision code gets ran
before the player properly gets updated. This means that the game will
use the newyp of the previous frame, which could be anything, really,
but it most likely just means the intended next y-position of the player
gets canceled, leaving the player with the same y-position they had
before.
Okay, but this bug only seems to happen when you put a checkpoint inside
a conveyor (or a moving platform that hasn't started moving yet) and
start playtesting from it, so why doesn't this bug happen more often,
then? Well, it's probably because of luck and coincidence. Most of the
time, if you're colliding with a conveyor or horizontally moving
platform, you probably have a correct newyp from the previous frame of
the game, so there'd be no problems. And before #502 got merged, this
previous frame would be provided by the player having to fall to the
surface due to the y-offset of their savepoint. However, if you make it
so that you immediately teleport on to a conveyor (because you died),
then this bug will rear its ugly head.
I got this warning during compilation because there were two nested for
loops both defining i. Better to have different names to make sure some
compilers won't overwrite the outer variable with the inner one.
I was investigating a desync in my Nova TAS, and it turns out that
the gravity line collision functions check for the `oldxp` and `oldyp`
of the player, i.e. their position on the previous frame, along with
their position on the current frame. So, if the player either collided
with the gravity line last frame or this frame, then the player collided
with the gravity line this frame.
Except, that's not actually true. It turns out that `oldxp` and `oldyp`
don't necessarily always correspond to the `xp` and `yp` of the player
on the previous frame. It turns out that your `oldyp` will be updated if
you stand on a vertically moving platform, before the gravity line
collision function gets ran. So, if you were colliding with a gravity
line on the previous frame, but you got moved out of there by a
vertically moving platform, then you just don't collide with the gravity
line at all.
However, this behavior changed in 2.3 after my over-30-FPS patch got
merged (#220). That patch took advantage of the existing `oldxp` and
`oldyp` entity attributes, and uses them to interpolate their positions
during rendering to make everything look real smooth.
Previously, `oldxp` and `oldyp` would both be updated in
`entityclass::updateentitylogic()`. However, I moved it in that patch to
update right before `gameinput()` in `main.cpp`.
As a result, `oldyp` no longer gets updated whenever the player stands
on a vertically moving platform. This ends up desyncing my TAS.
As expected, updating `oldyp` in `entityclass::movingplatformfix()` (the
function responsible for moving the player whenever they stand on a
vertically moving platform) makes it so that my TAS syncs, but the
visuals are glitchy when standing on a vertically moving platform. And
as much as I'd like to get rid of gravity lines checking for whether
you've collided with them on the previous frame, doing that desyncs my
TAS, too.
In the end, it seems like I should just leave `oldxp` and `oldyp` alone,
and switch to using dedicated variables that are never used in the
physics of the game. So I'm introducing `lerpoldxp` and `lerpoldyp`, and
replacing all instances of using `oldxp` and `oldyp` that my over-30-FPS
patch added, with `lerpoldxp` and `lerpoldyp` instead.
After doing this, and applying #503 as well, my Nova TAS syncs after
some minor but acceptable fixes with Viridian's walkingframe.
This commit restores the evaluation order of moving platforms and conveyors to
be what it was in 2.2. The evaluation order changed in 2.3 after the patchset
to improve the handling of the `obj.entities` and `obj.blocks` vectors (#191).
By evaluation order, I'm talking about the order in which platforms and
conveyors will be evaluated (and thus will take priority) if Viridian stands
on both a conveyor or platform at once, and they either have different speeds
or are pointing in different directions. Nowhere in the main game is there a
place where you can stand on two different conveyors/platforms at once, so
this is solely within the territory of custom levels, which is my specialty.
So what caused this evaluation order to change? Well, every moving platform
and conveyor in the game is actually made up of two objects: an entity, and a
block. The entity is the part that moves around, and the block is the part
that actually has the collision.
But if the entity is the part that moves around, and entities and blocks are
in entirely separate vectors, how is the block part going to move along with
it? Well, maybe you'd guess some sort of unique ID system, but spend some time
digging around the code and you won't find any trace of any (there's no
attribute on an entity to store such an ID, for starters).
Instead, what the game does is actually remove all blocks that coincide with
the exact top-left corner of the entity, and then create a new one. Destroying
and creating blocks like this all the time is hugely wasteful, but hey, it
worked.
So why did the evaluation order change in 2.3? Well, to understand that,
you'll need to understand 2.2's `active` system. Instead of having an object
be real simply by virtue of it existing, 2.2 had this system where the object
was only real if it had its `active` attribute set to true. In other words,
you would be looking at a fake object that didn't actually exist if its
`active` attribute was false.
On the surface, this doesn't seem that bad. But this can lead to "holes" in a
given vector of objects. A hole is simply an inactive object neighbored by
active objects (or the inactive object could be the first one in the vector,
but then have an active object immediately following it).
If you have a vector of 3 objects, all of them active, then removing the
second one will result in the vector containing an active object, followed by
an inactive object, followed by an active one. However, since the switch to
more properly use vectors instead of relying on this `active` system, there's
no longer any way for holes to exist in a vector. Properly removing an object
from a vector will just shift the rest of the objects down, so if we remove
the second object after the vector fix, then this will simply move the third
object into the slot of where the second object used to be.
So, what happens if you destroy a block and then create a new one in the
`active` system? Let's say that your `obj.blocks` looks like this, and here
I'm denoting each block by writing out its coordinates:
[30,60] [70,90] [80,100]
and that you want to update the position of the second one, because the entity
that that blocks belongs to has been updated. Okay, so, you delete that block,
which then makes things look like this:
[30,60] [-] [80,100]
and then afterwards, you create a new block with the updated position,
resulting in this:
[30,60] [74,90] [80,100]
Since `entityclass::createblock()` will find the first block slot that has a
false `active` attribute, it puts the new object in the same slot as the old
one. What has been essentially done here is that the slot of the block has
basically been reserved for the new block with the new position. Here, the
evaluation order of each block will stay the same.
But then 2.3 comes along and changes things up. So we start with an
`obj.blocks` like this again:
[30,60] [70,90] [80,100]
and we want to update the second block, like before. So we remove the second
block, resulting in this:
[30,60] [80,100]
It should be obvious that unlike before, where the third block stayed in the
third slot, the third block has now been moved to the second slot. But
continuing on; we are now going to create the new block with its updated
position, resulting in this:
[30,60] [80,100] [70,90]
At this point, we can see that the evaluation order of these blocks has been
changed due to the fact that the third block has now been moved to the slot
that was previously the slot of the second block.
So what can we do about this? Well, we can basically emulate what VVVVVV did
in 2.2, which is disable a block without actually removing it - except I'm not
going to reintroduce an `active` attribute or anything. I'll disable the
collision of all blocks at a certain position by setting their widths and
heights to 0, and then re-enable them later by finding the first block at that
same position, updating its position, and re-assigning its width and height
again.
The former is what `entityclass::nocollisionat()` does; the latter is what
`entityclass::moveblockto()` does. The former mimicks turning off the `active`
attribute of all blocks sharing a certain top-left corner; the latter mimicks
creating a new block - and it will only do this for one block, because
`entityclass::createblock()` in 2.2 only looked for the first block with a
false `active` attribute.
Now, some quirks relied on the previous behavior of destroying and creating
blocks, but all of these quirks have been preserved with the way I implemented
this fix.
The first quirk is that platforms passing through 0,0 will destroy all spike
hitboxes, script boxes, activity zones, and one-way hitboxes in the room. The
hitboxes of moving platforms, disappearing platforms, 1x1 quicksand, and
conveyors will not be affected.
This is a consequence of the fact that the former group uses the `x` and `y`
of their `rect`, while the latter group uses the `xp` and `yp` attributes. So
the `xp` and `yp` of the former are both 0. Meaning, a platform passing
through 0,0 destroys them all.
Having these separate coordinates seems like an artifact from the Flash days.
(And furthermore, there's an unused `x` and `y` attribute on all blocks,
making for technically three separate sets of coordinates! This should
probably be cleaned up, except for what I'm about to say...) But actually, if
you merge both sets of coordinates into one, this lets moving platforms
destroy script boxes and activity zones if it passes through the top-left
corner of them, which is probably far worse than the destruction being
localized to a specific coordinate that would never likely be reached
normally.
This quirk is preserved just fine without any special-casing, because instead
of destroying all blocks at 0,0, they just get disabled, which does the same
job. This quirk seems trivial to fix if I made it so that the position of a
platform's block was updated instantaneously instead of having one step to
disable it and another step to re-enable it, but I aim to preserve as much
quirks as possible.
The second quirk is that a moving platform passing through the top-left corner
of a disappearing platform or 1x1 quicksand will destroy the block of that
disappearing platform. This is because, again, when a moving platform updates,
it destroys all blocks at its previous position, not just only one block. This
is automatically preserved because this commit just disables the block of the
disappearing platform instead of removing it. Just like the last one, this
quirk seems extremely trivial to fix, and this time by simply making it so
`entityclass::nocollisionat()` would have a `break` statement, i.e. only
disabling the first block it finds instead of all blocks it finds, but I want
to keep all quirks that are possible to keep.
The last quirk is that, apparently, in order to prevent pushing the player
vertically out of a moving platform if they get inside of one, the game
destroys the block of the moving platform. If I had missed this edge case,
then the block would've been destroyed, leaving the moving platform with no
collision. But I caught it in my testing, so the block gets disabled instead
of destroyed. Also, it seems obtuse for those who don't understand why a
platform's block gets destroyed or disabled whenever the player collides with
it in `entityclass::collisioncheck()`, so I've put up a comment documenting it
as well.
The different platform evaluation order desyncs my Nova TAS, but after
applying this patchset and #504, my TAS syncs fine (save for the different
walkingframe from starting immediately on the ground instead of in the air
(#502), but that's minor and can be easily fixed).
I've attached a test level to the pull request for this commit (#503) to
demonstrate that this patchset not only fixes platform evaluation order, but
preserves some bugs and quirks with the existing block system.
The first room demonstrates the fixed platform evaluation order, by stepping
on the conveyors that both point into each other. In 2.2, Viridian will move
to the right of the background pillar, but in 2.3, Viridian will move to the
left of the pillar. However, after applying this patch, Viridian will now move
to the right of the pillar once again.
The second room demonstrates that the platform-passing-through-0,0 trick still
works (as explained above).
The last room demonstrates that platforms passing through the top-left corners
of disappearing platforms or 1x1 quicksand will remove the blocks of those
entities, causing Viridian to immediately pass through them. This trick is
still preserved after my patchset is applied.
Previously, setting the actual volume of the music was all over the
place. Which isn't bad, but when I added being able to press N to mute
the music specifically, I should've made it so that there would be a
volume variable somewhere that the game looks at if the music is
unmuted, and otherwise sets the actual volume to 0 if the game is muted.
This resulted in things like #400 and #505 and having to add a bunch of
special-cased checks like game.musicmuted and game.completestop. But
instead of adding a bunch of special-case code, just make it so there's
a central place where Mix_VolumeMusic() actually gets called, and if
some piece of code wants to set the music volume, they can set
music.musicVolume. But the music handling logic in main.cpp gets the
final say on whether to listen to music.musicVolume, or to mute the game
entirely.
This is how the music handling code should have been from the start
(when pressing N to mute the music was added).
Fixes#505.
The value of the macro might not change in the future, but it's there
for a reason. That reason being to improve code readability, because
otherwise 128 would just be a magic number that plopped in out of
nowhere. Sometimes the game uses MIX_MAX_VOLUME, other times it uses
128, so to be consistent I'm just going to enforce MIX_MAX_VOLUME
entirely.
This reverts commit cf5ad166e3.
My implementation will make it so single-case patches like this commit
won't be necessary anymore (there's no need to add a special-case check
for game.musicmuted, the way that I'm gonna do it). In fact, it's better
if I just revert the commit entirely.
It seems like the start point of a custom level and all checkpoints in
the game end up putting your spawn point one pixel away from the surface
it touches, which seems like an oversight. I'm going to enforce some
consistency here and make it so that all spawn points, whenever you
start from a start point or a checkpoint, will always be correctly
positioned flush with the surface they're standing on, and not one pixel
more or less than that.
An exotic checkpoint is a checkpoint with a sprite that is neither the
flipped checkpoint nor unflipped checkpoint. More specifically, it's a
checkpoint whose edentity p1 attribute is something other than 0 or 1.
Normally, whenever you touch an exotic checkpoint in-game, your
savepoint's y-position and gravitycontrol don't get touched. However, in
the editor, spawning from an exotic checkpoint means that your
gravitycontrol gets set to a value that is neither 0 nor 1. In this
invalid gravitycontrol state, Viridian is treated like they're flipped,
but they cannot unflip.
This is an inconsistency between the editor and in-game, so I'm fixing
it. Now, spawning from an exotic checkpoint in the editor will just set
your gravitycontrol to 0, i.e. unflipped.
So, 77a636509b fixed the fact that you
only got 1 frame of onground/onroof when standing on a vertical moving
platform, but removing those lines entirely means that it takes 1 frame
before the onground/onroof of 2 actually takes effect. This desyncs my
Nova TAS, so it seems important to fix.
The onroof/onground attributes are used to determine if the player is
standing on a surface and is eligible to flip. Most notably, it is an
integer and not a boolean, and it starts at 2, giving the player 2
frames to edge-flip, i.e. they can still flip 2 frames after walking off
an edge.
However, these attributes are unnecessarily reassigned in
movingplatformfix() (which is the function that deals exclusively with
vertically-moving platforms; horizontal moving platforms get their own
hormovingplatformfix()). Whoever wrote this misunderstood what
onroof/onground meant; they thought that they were booleans, and so set
them to true, instead of the proper value of 2. This ends up setting
onroof/onground to 1 instead of 2, causing a discrepancy with vertical
moving platforms and the rest of the surfaces in the game.
The bigger mistake here is duplicating code that never needed to be
duplicated. The onroof/onground assignment in gamelogic() works
perfectly fine for vertical moving platforms. Indeed, after testing it
with libTAS, I can confirm that removing the duplicate assignments
restores being able to edge-flip off of moving platforms with 2 frames
of leeway, instead of only 1 frame. It also doesn't change how long it
takes for the onroof/onground to get set when the player is recognized
as standing on a vertically-moving platform, either.
And so, it's better to not duplicate this code, because when you
duplicate it you run the risk of making a mistake, as I just
demonstrated.
By "unnecessary qualifiers to self", I mean something like using the
'game.' qualifier for a variable on the Game class when you're inside a
function on the Game class itself. This patch is to enforce consistency
as most of the code doesn't have these unnecessary qualifiers.
To prevent further unnecessary qualifiers to self, I made it so the
extern in each header file can be omitted by using a define. That way,
if someone writes something referring to 'game.' on a Game function,
there will be a compile error.
However, if you really need to have a reference to the global name, and
you're within the same .cpp file as the implementation of that object,
you can just do the extern at the function-level. A good example of this
is editorinput()/editorrender()/editorlogic() in editor.cpp. In my
opinion, they should probably be split off into their own separate file
because editor.cpp is getting way too big, but this will do for now.
This is a refactor that simply moves all temporary variables off of
entityclass, and makes it so they are no longer global variables. This
makes the resulting code easier to understand as it is less entangled
with global state.
These attributes were:
- colpoint1
- colpoint2
- tempx
- tempy
- tempw
- temph
- temp
- temp2
- tpx1
- tpy1
- tpx2
- tpy2
- temprect
- temprect2
- x (actually unused)
- dx
- dy
- dr
- px
- py
- linetemp
- activetrigger
- skipblocks
- skipdirblocks
Most of these attributes were assigned before any of the times they were
used, so it's easy to prove that ungloballing them won't change any
behaviors. However, dx, dy, dr, and skipblocks are a bit more tricky to
analyze. They relate to blocks, with dx, dy, and dr more specifically
relating to one-way tiles. So after some testing with the quirks of
one-way tiles, it seems that the jankiness of one-way tiles haven't
changed at all, either.
Unfortunately, the attribute k is clearly used without being assigned
beforehand, so I can't move it off of entityclass. It's the same story
with the attribute k that Graphics has, too.
This prevents users from being confused whenever they type a pipe in the
script editor, then save the level and load it again and see their
script lines unexpectedly splitting in two. Now if you attempt to type a
pipe, it simply won't happen at all.
Fixes#379.
It's possible that SDL_atoi() could call the libc atoi(), and if a
string is provided that's too large to fit into an integer, then that
would result in undefined behavior. To avoid this, use SDL_strtol()
instead.
Instead of copying to a temporary string, just use SDL_strncmp(). Also,
I checked the blame, and apparently I committed the line that used
strcmp() instead of SDL_strcmp(), for whatever reason. But that's fixed
now.
For some reason, the variable `k` is on entityclass and gets mutated in
createentity() and createblock(). Then updateentities() uses it without
checking if it's valid, because either `k` or the size of `entities`
could have changed in the meantime. To fix any potential undefined
behavior, these bounds checks should be added.
This fixes a bug where font_positions wouldn't get cleared after exiting
a custom level that had a font.txt if it didn't exist in the default
graphics, leading to messed-up-looking font rendering.
This bug was originally discovered by Ally.
You're intended to rescue Violet first, and not second, third, or
fourth, and especially not last.
If you rescue her second, third, or fourth, your crewmate progress will
be reset, but you won't be able to re-rescue them again. This is because
Vitellary, Verdigris, Victoria, and Vermilion will be temporarily marked
as rescued during the `bigopenworld` cutscene, so duplicate versions of
them don't spawn during the cutscene, and then will be marked as missing
later to undo it.
This first issue can be trivially fixed by simply toggling flags to
prevent duplicates of them from spawning during the cutscene instead of
fiddling with their rescue statuses.
However, there is still another issue. If you rescue Violet last, then
you won't be warped to the Final Level, meaning you can't properly
complete the game. This can be fixed by adding a `crewrescued() == 6`
check to the Space Station 1 Level Complete cutscene. There is
additionally a temporary unrescuing of Violet so she doesn't get
duplicated during the `bigopenworld` cutscene, and I've had to move that
to the start of the `bigopenworld` and `bigopenworldskip` scripts,
otherwise the `crewrescued() == 6` check won't work properly.
I haven't added hooks for Intermission 1 or 2 because you're not really
meant to play the intermissions with Violet (but you probably could
anyway, there'd just be no dialogue).
Oh, and the pre-Final Level cutscene expects the player to already be
hidden before it starts playing, but if you rescue Violet last the
player is still visible, so I've fixed that. But there still ends up
being two Violets, so I'll probably replace it with a special cutscene
later that's not so nonsensical.
I have no idea why neither conveyors and moving and disappearing
platforms rendered in the editor or in-game use
Graphics::drawentcolours(), but this needs to be bounds-checked just as
I did for the in-game rendering function.
The entity getters I'm referring to are entityclass::getscm(),
entityclass::getlineat(), entityclass::getcrewman(), and
entityclass::getcustomcrewman().
Even though the player should always exist, and the player should always
be indice 0, I wouldn't want to make that assumption. I've been wrong
before.
Also, these functions returning 0 lull you into a false sense of
security. If you assume that commands using these functions are fine,
you'll forget about the fact that `i` in those commands could be
potentially anything, given an invalid argument. In fact, it's possible
to index createactivityzone(), flipgravity(), and customposition()
out-of-bounds by setting `i` to anything! Well, WAS possible. I fixed it
so now they can't.
Furthermore, in the game.scmmoveme block in gamelogic(), obj.getplayer()
wasn't even checked, even though it's been checked in all other places.
I only caught it just now because I wanted to bounds-check all usages of
obj.getscm(), too, and that game.scmmove block also used obj.getscm()
without bounds-checking it as well.
When this is done, there is potential for a mistake to occur when
writing out the bounds check, which is eliminated when using the macro
instead. Luckily, this doesn't seem to have happened, but what's even
worse is I hardcoded 400 instead of using SDL_arraysize(ed.level), so if
the size of ed.level the bounds checks would all be wrong, which
wouldn't be good. But that's fixed now, too.
This is because if they are manually written out, they are more likely
to contain mistakes.
In fact, after further review, there are several functions with
incorrect manually-written bounds checks:
* entityclass::entitycollide()
* entityclass::removeentity()
* entityclass::removeblock()
* entityclass::copylinecross()
* entityclass::revertlinecross()
All of those functions forgot to do 'greater than or equal to' instead
of 'greater than' when comparing against the size of the vector. So they
were erroneous. But they are now fixed.
It's better to do INBOUNDS_VEC(i, obj.entities) instead of 'i > -1'.
'i > -1' is used in cases like obj.getplayer(), which COULD return a
sentinel value of -1 and so correct code will have to check that value.
However, I am now of the opinion that INBOUNDS_VEC() should be used and
isn't unnecessary.
Consider the case of the face() script command: it's not enough to check
i > -1, you should read the routine carefully. Because if you look
closely, you'll see that it's not guaranteed that 'i' will be initialized
at all in that command. Indeed, if you call face() with invalid
arguments, it won't be. And so, 'i' could be something like 215, and
that would index out-of-bounds, and that wouldn't be good. Therefore,
it's better to have the full bounds check instead of checking only one
bounds. Many commands are like this, after some searching I can also
name position(), changemood(), changetile(), changegravity(), etc.
It also makes the code more explicit. Now you don't have to wonder what
-1 means or why it's being checked, you can just read the 'INBOUNDS' and
go "oh, that checks if it's actually inbounds or not".
For some reason it called obj.getplayer() and did nothing with the
result. Weird. But it does say "Test script for space station" above.
Removing this fixes an 'unused variable' warning.
With the scope of these variables reduced, it makes analyzing this
function easier, as you can now clearly see all temporary variables are
actually initialized before they're used.
Since there's an INBOUNDS_ARR() macro, it's much better to specify the
macro for the vector is a macro for the vector, to avoid confusion.
All usages of this macro have been renamed accordingly.
Stuck prevention (pushing the player/supercrewmate out if they are
inside a wall) has been factored out into its own function, so it's no
longer copy-pasted but slightly tweaked just for the supercrewmate.
Instead of having two separate functions to move entities along vertical
moving platforms, one for the player and one for the supercrewmate, they
have been consolidated into one function.
In-level, they were made to be gray in #323. The editor does not reflect this however; they're still shown as
green. For the same reasons in #323, this adds special cases to draw the entities as gray.
Closes#372.
Also, I changed my name in contributors.txt to be my username as I didn't feel comfortable with it being my name.
Co-authored-by: Misa <ness.of.onett.earthbound@gmail.com>
The game has four different functions for the same XML schema:
Game::loadtele(), Game::savetele(), Game::loadquick(), and
Game::savequick(). This essentially means one XML schema has been
copy-pasted three different times.
I can at least trim that number down to being copy-pasted only one time
by de-duplicating the reading and writing part. So both Game::loadtele()
and Game::loadquick() now use Game::readmaingamesave(), and
Game::savetele() and Game::savequick() now use
Game::writemaingamesave().
This will make it take less work to add XML forwards compatibility
(#373).
Due to #464, standing inside a gravity line during a gotoroom that
occurs every frame will end up with the gravity line being gray instead
of being white. To temporarily fix this (until #464 is properly fixed),
I decided to add some kludge that colors it white if its onentity is 1.
I tested this patch with gravity lines in both constant-gotoroom and
normal environments, and it seems to be fine for both.
In 2.0, 2.1, and 2.2, calling flipgravity() on an entity that wasn't
rule 6 would change it to rule 7. In 2.3 currently, doing this will only
change it to rule 7 if it's already rule 6, starting with the
introduction of the change where if an entity was rule 7 it would be
changed to rule 6.
The crewmate conversion trick has been restored, but converting an
entity to a crewmate will change its rule to 6, not 7 like in pre-2.3.
If you want it to be changed to rule 7 instead of 6, you'd have to call
flipgravity() twice in 2.3 and only once in pre-2.3, which would make
maintaining compatibility between versions a bit harder.
So to fix this, I'm inverting it so that if you call flipgravity() on an
entity that isn't rule 7, it will be converted to rule 7, and only if
it's rule 7 will it be converted to rule 6.
This is a followup to b7cf6855b0 and
10ed0058fd.
In 2.2, if you had a duplicate player entity, there'd be no way to get
rid of it. Except for the recently-discovered Arbitrary Entity
Manipulation glitch, where you set `i` to the indice of the entity and
call flipgravity() on it, turning its rule to 7 and making it no longer
a player entity.
However, I patched this useful mechanic out when I made it so that you'd
no longer be able to convert entities with rule 0 to rule 6
(10ed0058fd, upheld in
b7cf6855b0), because doing so would mean
being able to softlock the game by not having any player entity.
So, in this patch, I'm making it so that you CAN convert duplicate
player entities to crewmates (and thus basically destroy them), but you
can't do that to the TRUE player entity (i.e. the first entity indice
that has rule 0, which is basically always indice 0).
This patch fixes a regression caused by commit
6b1a7ebce6.
When you spawn a crewmate with an invalid color, by doing something like
`createentity(100,100,18,-1,0)` (here the color is -1, which is
invalid), a white crewmate with the color of solid white (255, 255, 255)
would appear.
That is, until AllyTally came along and committed commit
6b1a7ebce6 (Make "[Press ENTER to
return to editor]" fade out after a bit) (PR #158). Then after that
commit, it would seem like the crewmate didn't appear, but in reality
they were just invisible, because they had an invisible color.
As part of Ally's changes, to properly support drawing text with a
certain amount of alpha, she made BlitSurfaceColoured() account for the
alpha of the color given instead of only caring about the RGB of the
color, discarding the alpha, and using the alpha of the surface it was
drawing instead. This effectively made it so the alpha of whatever it
was drawing would be 255 all the time, except for if you had custom
textures and your custom textures had translucent pixels.
However, the default color set by Graphics::setcol() if you didn't
provide a valid color index was 0xFFFFFF. Which is only (255, 255, 255)
but ends up having an alpha value of 0 (because it's actually
0x00FFFFFF). And all colors drawn with alpha 0 end up being drawn with
alpha 0 after 6b1a7ebce6. So
invalid-colored entities will end up being invisible.
To fix this, I just decided to add alpha to the default value instead.
In addition, I used getRGB() to be consistent with all the other colors
in the function.
This is a regression from 25779606b4
(PR #74).
On the one hand, I should've thought this through carefully when
implementing the fix for the lower-score overwrite bug. On the other
hand, flibit didn't seem to notice either. And on the third hand, no one
else seems to have noticed, when they have had over 8 months to do so.
Not even the person who originally reported the lower-score overwrite
bug and also reported other bugs I hadn't noticed (e.g. the "You have
rescued a crewmate!" in Flip Mode) noticed this bug, which I believe was
weee50. But to be fair, he does seem to be less active nowadays.
On the fourth hand, I only realized the cause of the duplicate bug after
stepping through it in GDB, instead of just looking at it and going "hey
wait a minute" earlier. I'm surprised it didn't take me longer to
realize the problem.
I'm not sure what all these hands mean anymore, or where I'm getting
extra hands from. Whatever. This regression is fixed now.
So, I was staring at VVVVVV code one day, as I usually do, and I noticed
that warp lines had this curious code in entityclass::updateentities()
that set their statedelay to 2, and I thought, hm, maybe the pre-2.1
warp line bypass is caused by this statedelay. And, it doesn't seem like
this is the primary code used to detect if the player collides with warp
lines, the actual code is commented with "Rewritten system for mobile
update" and bolted-on in gamelogic() instead of properly being in
entityclass::entitycollisioncheck().
So, after getting tripped up on the misleading indentation of that
"Rewritten system" block, I removed the rewritten system, re-added
collision detection for rule 7 (horizontal warp lines), and after
checking the resulting behavior, it appears to be nearly identical to
that of warp lines in 2.0.
You see, if you use warp lines to flip up from the top of the screen
onto the bottom of the screen, close to the edge of the bottom of the
screen, Viridian's head will display on the top of the screen in 2.0. In
2.1 and later, this doesn't happen, confirming that my theory is
correct. I also performed warp line bypass multiple times in 2.0 and
with my restored code, and it is pretty much the exact same behavior.
So now, the pre-2.1 warp line bypass glitch has been re-enabled in
glitchrunner mode.
This misleading indentation makes it really easy to misanalyze this
block as only containing the statements up to obj.customwarplinecheck(),
when in reality it contains everything up to the modifying of
map.warpx/map.warpy. I have made this misanalysis just now in my attempt
to figure out the pre-2.1 warp line bypass glitch, and I don't like it.
So I'm fixing this indentation now.
So there's this trick that I recently discovered, since many script
commands don't initialize `i` it's possible to use them to manipulate
arbitrary entities by specifying their indice.
This means in 2.2 you can convert entities to pseudo-crewmates by
changing their rule to 6. Except in 2.3, this was fixed when I fixed the
command to work on flipped crewmates as well. So I'm restoring this
functionality, but I recognize the protection that my previous change to
the command did in preventing levels from destroying the player entity
by changing the player's rule to something nonzero, so instead of
removing the if-conditional entirely, I'm making it so that it will only
set the rule if the entity's rule isn't 0.
For some reason, GetSubSurface() and ApplyFilter() were hardcoding the
bits-per-pixel and/or mask arguments to SDL_CreateRGBSurface(). I've
made them simply re-use the bits-per-pixel and masks of the input
surfaces they operate on, but the bits-per-pixel should always be 32 and
masks should always go first-byte alpha, second-byte red, third-byte
green, fourth-byte blue.
The game usually runs on little-endian anyways, but even if it did run
on big-endian, it doesn't check endianness everywhere so these checks
are useless. Furthermore, the code should be written so that endianness
doesn't matter in the first place.
Neither of these were used anywhere, so to simplify the code and prevent
having potentially broken code that's never shown to be broken because
it's never tested, I'm removing these.
For some reason, there's some color-clamping code in this function
directly after already-existing color-clamping code. This code dates
back to 2.2. And also, there's a smaller lower-bound of -1 for the red
channel, despite the fact that this smaller value doesn't matter because
the red would get clamped to 0 by the first code anyway.
So even if this was put here for some strange reason, it doesn't matter
because it doesn't do anything anyway.
It's trivially easy to send the scripting system into an infinite loop
on the same frame (i.e. without any script delay in between, i.e. within
the same execution of script.run()). Just take a look at these two
scripts:
a:
iftrinkets(0,b)
#
b:
iftrinkets(0,a)
#
The hashes are to prevent the scripting system from parsing iftrinkets()
using the internal version instead of the simplified version, because
after doing a simplified iftrinkets(), the parser will (to oversimplify)
execute the last line of the script as internal.
Anyway, sending the game into an infinite loop like this will cause the
Not Responding dialog on Windows.
So to prevent this from happening, I've added an execution counter to
scriptclass::run(). If it gets too high, we're in an infinite loop and
so we stop running the script.
I noticed that if I have a large amount of entities in the room, the
game starts to freeze and one frame would take a very long time. I
identified an obvious cause of this, which is that the entity collision
checking in entityclass::entitycollisioncheck() is O(n²), n being the
number of entities in the room.
But it doesn't need to be O(n²). The only entities you need to check
against all other entities are the player and the supercrewmate. You
don't need to "test entity to entity" if 99% of the pairs of entities
you're checking don't involve the player or supercrewmate.
How do we make it O(n)? Well, just hoist the rule 0 and type 14 checks
out of the inner for-loop. That way, the inner for-loop won't be
unconditionally ran, meaning that in most cases it will always be O(n).
However, if you start having large amounts of duplicate player or
supercrewmate entities (I don't know why you would), it would start
approaching O(n²), but I feel like that's fair in that case. But most of
the time, it will be O(n).
So that's how collision checking is now O(n) instead.
There's not really any good reason to prevent this action during a fade
animation. That just makes the fade timer one more potential contributor
to a softlock.
I'm leaving the fademode conditional on the Time Trial quick restart,
though - removing it would mean being able to quick restart during a
fade-in, and thus being able to spam Enter over and over to keep
re-starting the fade animation, which looks goofy.
The hooks to bring up the map screen, pause screen, quit from Super
Gravitron, restart Time Trial, and commit suicide have now been hoisted
out of the for-loop that checked for a player entity. None of these
actions require a player entity, and there's no good reason to take away
your control from any of these actions, especially being able to quit to
the menu. The only actions inside the for-loop now are activating a
terminal and activating a teleporter, both of which require a player
entity to be standing in front of a terminal or teleporter, and both of
which have good reasons to be temporarily disabled.
This makes it so the fix for crewmates' drawframes being wrong for
1-frame is fixed for all crewmates regardless of when they get created.
Sure, crewmates created in mapclass::loadlevel() have their drawframes
fixed there, but for crewmates that get created from scripting (such as
Violet when gotorooming to the Ship teleporter room after Space Station
1), this fix doesn't apply to them. But now it does, and Violet will no
longer be facing the wrong way for 1 frame when teleporting to the Ship
teleporter room in the Space Station 1 Level Complete cutscene.
If the player is stuck in a wall (which shouldn't happen in the first
place), their sprite would always default to being flipped, even if they
were unflipped.
Being stuck in a wall is characterized by having both positive onfloor
and onground.
It's perfectly acceptable to have both warp lines and a warping
background in the same room. Many levels do this exact thing, I would
say at least 30 or so levels, many of them popular and played by many,
and this has never caused any issues at all.
All that having both warp lines and warp BG does is make it so the
warping of the warping background gets overriden by the warp lines, but
make it so the background is still a warp background. So in effect, you
can have a warp background without any warping. This is perfectly
defined behavior. Except, for whatever reason, it's unintentional, and
the editor tries to prevent you from doing it.
Key word being "tries". The code to prevent having both warp types is
bugged (at least when you change the warp BG. The check when you place
warp lines seems to be solid). It compares the p1 and p2 attributes of
warp lines to the x-coordinate and y-coordinate of the room, despite p1
and p2 having nothing to do with room coordinates. p1 is the type of the
warp line and should be treated as an enum, and p2 is the offset of the
warp line from the top/left of the screen. This results in this check
sometimes working if you're unlucky, but never actually working properly
most of the time. This means people can first place warp lines, and then
change the warp background later, to have both warp lines and a warp
background.
Having these checks just further complicates the code, makes it more
error-prone, and just inconveniences people when they want to do
something that's perfectly fine to do. So it's best if we just remove
these checks.
Fixes#402 (Violet appearing 1 frame after the Ship teleporter room
appears).
The root cause of this bug is due to the game loop order changes made
with the over-30-FPS patch. 2.2's game loop order was gameinput(),
gamerender(), then gamelogic(). In 2.3, gamerender() was moved to the end
as it required special code to render more than 30 frames a second. So
2.3's game loop order is gameinput(), gamelogic(), then gamerender().
In hindsight, I could have preserved the game loop order, but this would
require some more complex code in the game loop than what is there
currently. Fixing it now would fix rendering glitches such as this one
(along with being able to remove script.dontrunnextframe with the
two-frame-delay fix), but it could also introduce new rendering glitches
we don't yet know about. After discussing this in Discord DMs with
flibit, we agreed that the game loop order should be fixed in 2.4
instead.
When the game teleports you, gamelogic() runs script.teleport(). This
function will gotoroom to the teleporter destination, then it loads the
teleport script. Some teleport scripts (such as levelonecomplete, which
creates Violet) expect that their entities will be created, and more
generally that their script will be ran, on the same frame that the
gotoroom happens, i.e. by the time that the next gamerender() happens,
i.e. script.run() should be ran before the next gamerender() happens.
This would be true on the old game loop order, but with the new game
loop order, gamerender() gets ran directly after gamelogic() with no
script.run() in between.
To fix this, I did the same thing I did with the two-frame-delay fix
(#317), where I ran the script for that frame, but in order to prevent
running it twice I set script.dontrunnextframe to true.
This is a follow-up to #421.
The game would draw the activity zone if there was one active at all,
and would ignore game.act_fade. Normally this wouldn't be a problem, but
since #421, it's possible that there could be an active activity zone
but game.act_fade would still be 5. This would happen if you entered a
new activity zone while a cutscene was running.
To fix this, just make it so that the prompt gets drawn on its own and
only depends on the state of game.act_fade (or game.prev_act_fade), and
won't be unconditionally drawn if there's an active activity zone. As a
bonus, this de-duplicates the drawing of the activity prompt, so it's no
longer copy-pasted.
This fixes a bug where opening a script, then closing the script but not
exiting the script list, then opening a script again (it can be the same
script as before) would result in you being unable to type in the
script. You would have to close the script, then close the script list,
then re-open the script list in order to be able to type properly.
This was caused by the fact that key.enabletextentry() was being called
when the script list was opened, but key.disabletextentry() was being
called when closing a script. So the fix for this is to simply move the
key.enabletextentry() to its proper place, which is when the script is
being opened, and not when the script list is.
Some levels rely specifically on the fact that certain script boxes are
loaded using gamestates, instead of directly loading the script and
bypassing the gamestate system. Then weird things could happen. This
restores compatibility with those levels.
mapclass::twoframedelayfix() doesn't need to be updated because the
point of that function is to bypass the gamestate system entirely
anyways.
There's not really any need for it to be there. It gets called when the
Time Trial restarts, as restarting the Time Trial calls
script.startgamemode(), which calls script.hardreset() anyway.
Furthermore, since script.hardreset() is removed, we can also remove two
lines that are meant to work around the fact that everything gets reset,
which is now no longer the case.
Fixes#367.
Previously, it was assuming that the number of PPPPPP/MMMMMM tracks
would always be 16, since if that wasn't the case... then the game would
rudely and abruptly segfault when attempting to load the file. Huh.
But now that the game properly deals with invalid headers, it's possible
for the number of tracks to be 0. So I'll need to remove this
assumption.
