I have spelled out each overloaded version instead, and only the
overloads that are actually used - which just happens to be everything
except the 8-argument one. I don't want to deal with callers right now
(there are too many of them), so I'm not going to change the names that
the callers use, nor do I want to change the amount of arguments any
existing callers use right now - but we will have to deal with them in
one way or another when we move to C.
The script command createentity() is always an int. But not only that,
every time createentity() is used, its arguments are always treated like
ints. Always. I knew that vx/vy were floats because of the int casts in
the function, but I didn't even realize that xp/yp were floats, too,
until I checked just now! That's how much they're treated like ints.
All int casts in createentity() have also been removed, due to being
unnecessary (either because of us suppressing MSVC implicit conversion
warnings, or because there are now no longer any conversions happening).
This boolean is assigned, and it is checked... but it's never assigned
to true, thus making it useless. I also checked 2.2 source and the same
thing happens there; to prevent any confusion, I'm removing this.
So... I did see that map.ypos was a float when I added over-30-FPS mode,
because map.oldypos wasn't there before... I'm guessing that I kind of
just ignored it at the time. But, c'mon, map.ypos and map.oldypos are
always treated as ints, so there's literally no reason for them to be
actually floats in reality. I didn't even know they were anything other
than ints until I checked Map.h.
This is quite simple - whenever the user uses their keyboard or
controller, we hide the mouse cursor. Whenever they move the mouse, we
show it again. This makes it so the cursor gets out of the way when they
play the game, but reappears when they need it.
There is also a timeout, to prevent strobing if the user decides to use
the keyboard/controller and mouse at the same time. There is no timeout
from hiding the mouse cursor, but there is a timeout from showing the
mouse cursor - this because it's okay if the mouse lingers for a few
frames when you start using the keyboard, but really annoying if the
mouse doesn't instantly appear when you move it.
The config option has been removed. I'm going to implement something
that automatically shows and hides the mouse cursor whenever
appropriate, which is better than a config option.
These are two C++ features that we don't need, don't use, and will never
use in the future. Apparently the best way of doing this in CMake is to
fiddle with the CXX_FLAGS using regex.
Now this is one less flag I need to supply myself when I invoke CMake...
This variable is not defined anywhere and never has been since the
source code release (which is when this CMake file was first created).
To make things clearer, I'm cleaning this variable up.
A function like add_definitions() adds definitions to ALL targets, not
just VVVVVV. This kind of namespace pollution is messy, and could result
in bugs if you pollute with the right kind of pollutant.
So instead of using add_definitions(), use target_compile_definitions().
And instead of using include_directories(), use
target_include_directories().
All the C third-party dependencies are C90, and all the C files we have
are also C90 (well, almost, but that's easily sorted). So we have
basically no reason to not go with C90 here.
The only wrinkle is, turning C extensions off for physfs-static results
in linker errors because PhysFS implicitly uses alloca() without
including it properly (on Linux). I am not the only one who has ran into
this - see https://icculus.org/pipermail/physfs/2020-April/001293.html -
and it's a bug with PhysFS. The workaround I've gone with is to enable C
extensions. (There might also be some funkiness with PhysFS's use of the
`inline` keyword, so enabling extensions will paper over that as well.)
So there were actually only two instances of C99-style end-of-line
comments in C files - and technically one of them was just a C file
including MakeAndPlay.h.
It seems like CMake 3.1.3 introduced the C/C++ standard properties,
while the minimum version of this CMake file is 2.8.12. So we do what
FAudio does, which is print a warning if the CMake version is too old
and otherwise use it if we have the feature.
They're the same thing, but using option() better conveys intent.
However this can't be done for anything that isn't a bool, which the
CUSTOM_LEVEL_SUPPORT option is not (it's a tri-state string).
These were introduced in 098fb77611 - did
Leo not know that they were already there at the top of the file? This
does the same thing, except it only sets it for VVVVVV instead of
everything (so this wouldn't set it for the third-party dependencies).
If a track was restarted after it faded out, then it wouldn't play. This
is because currentsong wasn't set to -1 after fading out, and that is
because the fade out calls pause() instead of haltdasmusik() when it
finishes.
Unlike f196fcd896, this fixes the time
trial music while keeping it to the same behavior as 2.2, and fixes
every single possible case that this music bug could have happened.
This reverts only a part of f196fcd896 -
as the original commit author did not do their changes atomically, they
also squashed in a de-duplication within the same commit. So I'm only
reverting the part of the commit that wasn't the de-duplication, which
is simply the changes to the music.fadeout() calls.
This is being (partially) reverted for several reasons:
1. It's not the correct behavior. What this does instead is persist the
track through after you restart the time trial, instead of fading it
out, then restarting it again. This is in contrast to behavior in
2.2, and I see no reason to not keep the same behavior.
2. It's a single-case patch. The time trials are not the only time in
the game a music track could fade out and then be restarted with the
same track - custom levels could do the same thing too. Instead of
fixing only one case, we should strive to fix EVERY case.
The original commit author (trelbutate) also didn't write anything in
the commit description of f196fcd896. What
you should write in the commit description is things like rationale,
analysis, and other good information that would be useful to anyone
looking at your commit to understand why you did what you did. Having no
commit description leaves readers in the dark as to why you did what you
did.
Thus, I don't know why trelbutate went with this solution, or if they
knew that it was only a single-case patching, or if they knew that it
wasn't 2.2 behavior.
By not writing the commit description, they miss a chance for
reflection; speaking from personal experience, I myself have gone back
and improved my commits countless times because I wrote commit
descriptions for every single one of them, and sometimes whenever I
write them, I think to myself "hang on a minute, that doesn't sound
quite right" and end up finding improvements.
If trelbutate wrote a commit description, they might have realized that
it wasn't 2.2 behavior, and gone back and fixed up their commit to be
correct. As it stands, though, they didn't have to think about it in the
first place because they never bothered to write a commit description.
edteleportent is a global variable that gets assigned whenever the
player collides with a warp token, and gets read from later down the
line in gamelogic(). While I don't know of any way to cause anything bad
with this (and I did try), storing a temporary indexing variable like
this is only bound to be a liability in the future - so we might as well
prevent badness now by adding a bounds check here.
This fixes a bug where quitting to the menu from command-line
playtesting with -playassets specified would always use those assets
when loading back in to any custom level. This also fixes loading in to
a custom level quicksave always using the command-line playtesting
arguments instead of using the actual quicksave.
In a vertically-warping room, the 'height' of the room becomes 232
pixels, regardless of if you have a room name or not. So the remaining 8
rows of pixels at the bottom of the screen corresponds with the first 8
rows of pixels at the top of the screen, and entities in the bottom 8
rows of pixels get teleported to the top of the screen.
The screen wrapping drawing code doesn't draw entities in the top 8 rows
of pixels at the bottom, leading to a discontinuous effect where it
looks like vertically-warping entities don't neatly change from the
bottom to the top or vice versa - this is especially noticeable with
enemies. To fix this, just increase the threshold for drawing top
entities at the bottom of the screen by 8 pixels.
When an entity vertically warps, it teleports upwards or downwards by
232 pixels. However, the graphics code draws them with an offset of 230
pixels. This is off by 2 pixels, but it's enough to make a
downwards-moving enemy look like it suddenly collides with the bottom of
the screen (in a room without a room name) before it warps, especially
if you go frame-by-frame.
It seems like for whatever reason that the frames portion of save files
is never read from, and always zeroed. Well, technically they get parsed
but the result is immediately discarded afterwards.
I see no reason to do this, so I'm removing these zeroes.
This fixes being able to make music fully fade in (or out) by unfocusing
the game, or making the fade bars fully fade in (or out) by unfocusing
the game, or racking up the timer while the game is unfocused.
In 2.2 and previous, the game would call resetgameclock() every frame
for the last 30 frames of the time trial countdown in order to make sure
it gets reset. This was in a render function, and didn't get brought out
in 2.3, so 2.3 resets the game clock *while rendering*, which is kinda
bad and is an oversight on my part for not noticing.
Instead of doing that, just add a conditional to the timer so that it
won't tick during the time trial countdown. This fixes#699 even further
by making it so the time trial par can't even be lost during the
countdown, because the timer won't tick up - so you can never get a sad
squeak to play by pausing the game or unfocus-pausing it during the
countdown.
For some reason, resetgameclock() is only ever used in gamerender(), and
everywhere else just zeroes the clock manually. This is weird to me, so
I've made it so everywhere that zeroes the clock uses the
resetgameclock() function to do so.
Otherwise, if the timer ticked up past the par (via using the unfocus
pause or pause menu), it would result in the sad squeak being played
every frame because the game would constantly be setting
timetrialparlost, then moving to the code block below, assuming that
since timetrialparlost that we haven't lost the par already, and playing
the squeak.
timetrialparlost gets reset in hardreset() and startgamemode() anyways,
so there's no need to be constantly resetting this variable.
Fixes#699.
It turns out this entire chunk of code is simply unneeded (and is
actively harmful) since when we're done with the time trial,
quittomenu() gets called, and that removes the previous stack frame
anyway.
I'm guessing that I added this code, then added quittomenu(), then
didn't consider how this code and quittomenu() would mix. But anyways,
this bug is fixed.
Fixes#714.
This seems to be a comment left by Ethan that he never got around to. So
I did it for him.
What I've done is made it so FileSystemUtils.cpp knows what a binary
blob is, and moved the binary blob loading code directly to
FileSystemUtils.cpp. To do this, I removed the private access modifier
from binaryBlob - I don't think we'll need it, and anyways when we move
to C we can't use it.
Along the way, I also cleaned up the style of the function a bit - the
null termination offset is no longer hardcoded, and the function no
longer mixes code and declarations together in the same block.
I also noticed that when printing all the filenames at the end, a single
invalid header would stop the whole loop instead of just being skipped
over... this seems to be a bug to me, so I've made it so invalid headers
just get skipped over instead of stopping the whole loop.
In FileSystemUtils.h, I used a forward declaration. In hindsight,
incomplete forward declarations should basically always be done in
header files if possible, otherwise this introduces the possibility of
transitive includes - if a file includes this header and it does a full
include, the file is silently able to use the full header, whereas if
it's a forward declaration, then the moment the file tries to use the
full header it fails, and then it's forced to include the full header
for itself. But uh, that's a code cleanup for later.
While fixing all the other music bugs, I discovered that starting
playtesting in the editor wouldn't play the level music.
The problem is that the editor playtesting start code calls
music.fadeout() before calling music.play(). This queues up the track
from the music.play() call. After that, what should happen is that
processmusic() processes the fade, the fade is then finished, and then
after that it sees that the music is halted so it can play the queued
track.
Instead what happens is that the function first attempts to play the
music before the fade is processed and finished, so play() will re-queue
the music again, but the queue gets cleared right after that (this is a
subtle bit of behavior - it means if the game fails to play a queued
track due to it fading, it's not going to re-queue it again and end up
in some sort of infinite loop).
This is a frame ordering issue - the function is tripping over itself
when it shouldn't be. To fix it, just put the queue processing code
after the fade processing code.
This fixes the 2.2-and-below music blocking workaround not working in
2.3.
The issue was that when the music got halted by the script, the fade
volume would still be processing, silently being decremented in the
background. So the script playing the track afterwards would make the
game queue it (as it was called during the fade), but then the music is
halted so the game would attempt to play it, but the fade is STILL
happening so it wouldn't actually play it and would attempt to queue the
track again.
However, that queue gets discarded immediately afterwards because the
music.play() call happened inside the code responsible for playing the
queued music, and that code unconditionally clears the queue variables
immediately after calling play(). So that's good to know - if the game
queues a song, but fails to play it because of a fade, it's not going to
immediately re-queue it and potentially get stuck in a loop of
infinitely queueing the same song over and over again each frame.
Anyways, the source of the problem is not resetting the fade booleans
when halting music, so I've reset them.
Fixes#701.
The problem here is that even though we start playing the music when the
volume is set to zero, mixer's state doesn't have volume zero, so
whatever it plays next will be the very first quanta of the track but at
the previous volume (in this case, the maximum volume). To fix this,
just update mixer when we update the volume here - it's okay to not
account for user volume because it ends up being zero anyway.
Fixes#710.
This fixes a bug where fading music in but not going through the
music.play() path wouldn't start the fade volume from zero. If this
happened, then the previous volume would persist, and if the previous
volume was the max volume, then that essentially canceled out the
fade-in and prevented it from happening at all. But now all paths to
fadeMusicVolumeIn() set the volume to zero first, instead of only the
caller of music.play().
When you pick up a trinket in the wild, the music gets silenced, so it
silently plays in the background until you advance the trinket text.
However, foundtrinket (used when Victoria or Vitellary give you a
trinket) is inconsistent with this, and halts the music instead of
silencing it.
This was probably due to the musicfadein script command not being
implemented, so Terry or Simon had to simply make do and halt the music
instead. But musicfadein is implemented and is being used in the trinket
cutscenes, so this is another inconsistency that I will fix.
When you pick up a trinket in the wild, the music will fade back in
afterwards. However, the special trinket cutscenes (where Victoria or
Vitellary will directly give you a trinket) are inconsistent with this,
and restart the music instead of fading it back in.
Looking at the scripts themselves, it immediately becomes obvious the
reason for this inconsistency - 2.2 and previous didn't implement the
musicfadein command, so it couldn't be used, and Terry or Simon simply
had to make do with simply restarting the music. However, 2.3 implements
musicfadein, so we can simply swap it out and remove the
trinketscriptmusic command.
This is 2.2 behavior, which I forgot to keep. Otherwise, if music has
halted and you try to play the same track, it simply won't work, because
the current song is the same as the song you're trying to play. This is
what happened with the trinket scripts - the game halted music, then
tried to play the same track.
Fixes#712.
It's not really used because CreateDirectory doesn't support setting
chmod values, but it does clarify intent of the argument.
Co-authored-by: Ethan Lee <flibitijibibo@gmail.com>
In #52 I fixed VVVVVV not being able to handle filepaths with non-ASCII
characters on Windows. 2f0a0bce4c and
aa5c2d9dc2 reintroduce this problem,
however, by reverting the definition of mkdir to how it was before the
fix and using the non-Unicode version of CreateDirectory. And I can
confirm that VVVVVV indeed doesn't make its folder anymore with a
Windows username of "тест". This commit fixes that issue.
This adds music and volume sliders to the audio options. To use the
sliders, you navigate to the given option, then press ACTION, and your
selection will be transferred to the slider. Pressing left or right will
move the slider accordingly. Then you can press ACTION to confirm the
volume is what you want and deselect it, or you can press Esc to cancel
the volume change, and it will revert to the previous volume; both
actions will write your settings to disk.
Most of this commit is just adding infrastructure to support having
sliders in menus (without copy-pasting code), which is a totally
completely new user interface that has never been used before in this
game. If we're going to be adding something new, I want to make sure
that it at least is done the RIGHT way.
Closes#706.
This adds <musicvolume> and <soundvolume> tags to unlock.vvv and
settings.vvv, so users' volume preferences will be persistent across
game sessions. This does not add the user interface to change them from
in-game; the next commit will do that.
This function is simple - it takes a given buffer and its size, fills it
with a certain character, and null-terminates it. It's meant to be used
with freshly-created buffers, so we don't copy-paste code.
Pressing return in gameplay options would send you back to the pause
menu instead of the general options menu, and pressing return in graphic
options would send you back to the pause menu instead of the general
options menu, too. Additionally, pressing Esc in graphic options would
also send you back to the pause menu instead of the general options
menu.
Like I said before, the menu system is still a bit hardcoded in some
places, and these happened because Terry forgot to update them when he
changed the menus around.
Fixes#711.
The in-game menu code is better than it was in 2.2 but still pretty
hardcoded, so to fix this just change each individual case around. This
bug happened because the "options" button was in the place where "quit
to menu" was previously, but Terry forgot to update it when changing all
the options around.
PhysFS requires a write dir to create a directory, so the first PHYSFS_mkdir
never could have worked. Because of that we need to go back to the old mkdir,
and since we're bringing that back we can reuse it for saves/levels, because we
know it works and we don't have to worry about middlewares ruining anything.
When a text box in the script system (not the gamestate system) is
displayed onscreen and "- Press ACTION to advance text -" is up, the
game sets pausescript to true, so the script system won't blare past the
text box and keep executing. Then it also sets advancetext to true.
Crucially, these two variables are different, so if you have pausescript
true but advancetext false, then what happens?
Well, you get softlocked. There's no way to continue the script.
How is this possible? Well, you can teleport to the (0,0) teleporter
(the teleporter in the very top-left of the map) and regain control
during the teleporter animation. To do that, in 2.2 and below, you have
to press R at the same time you press Enter on the teleporter, or in 2.3
you can simply press R during the cutscene. Then once you teleport to
the room, it's really precise and a bit difficult (especially if
Viridian is invisible), but you can quickly walk over to the terminal in
that room and press Enter on it.
Then what will happen is the terminal script will run, but the
teleporter gamestate sequence will finish and turn advancetext off in
the middle of it. And then you're softlocked.
To fix this, just add a check so if we're in gamestate 0 and there's a
script running, but we have pausescript on and advancetext off, just
turn pausescript off so the game automatically advances the script.
This softlock was reported by Tzann on the VVVVVV speedrunning Discord.
If you manage to get softlocked by being stuck in completestop, the next
thing you'll notice is that quitting to the menu or loading back in will
not reset this.
So you can actually softlock yourself in 2.3 by doing the trinket
cutscene, then quitting to the menu (because 2.3 lets you open the pause
menu during completestop). This is a bug, and should be fixed.
You can skip the "You have found a shiny trinket!" cutscene. The
conditions are that this can only be done in the main game, in the main
dimension (no Polar Dimension), the checkpoint that you last touched
must not be in the same room as the trinket, and you have to have
skipped the Comms Relay cutscene. To do the skip, you press R on the
exact frame (or previous frame, if input delay is enabled) that Viridian
touches the trinket. Then, the gamestate will be immediately set to 0
(because of the gotoroom) and the cutscene will be skipped.
Speedrunners of the main game, well, run the main game already, the
only trinket in the Polar Dimension is not one you want to do a death
warp at, and they have a habit of automatically skipping over the Comms
Relay cutscene because they press R at the beginning of the run when
Viridian teleports to Welcome Aboard, to warp back to the Ship and so
they can leave rescuing Violet for later.
So someone reported softlocking themselves by doing the trinket text
skip in 2.3. The softlock is because they're stuck in a state where
completestop is true but can't advance to a state that turns it off. How
does this happen? It's because they pressed R too late and interrupted
the gamestate sequence. In 2.2 and previous, if you're in the gamestate
sequence then you can't press R at all, but 2.3 removes this restriction
(on account of aiming to prevent softlocks). So only on the very first
frame can you death warp and interrupt the gamestate sequence before it
happens at all.
Anyways to fix this, just turn completestop off automatically if we're
in gamestate 0 and there's no script running.
This softlock was reported by Euni on the VVVVVV speedrunning Discord.
So some people reported the levels list crashing when they loaded it.
But this wasn't reproducible every time. They didn't provide any
debugging information, so I had to use my backup plan: doing a full
audit of the code path taken for loading the levels list.
And then I found this. It turns out this was because I used a
LOAD_ARRAY_RENAME() macro on an std::vector. You can't do that because
you need to use push_back() to resize a vector, so the macro will end up
indexing into nothing, causing a segfault. However, this code path would
only be taken if you have an old levelstats.vvv, from 2.2 and previous -
which explains why it wasn't 100% reproducible. But now that I know you
need an old levelstats.vvv, this bug happens 100% of the time.
Anyways, to fix this, just ditch the macro and expand it manually, while
replacing the indexing with a proper usage of push_back().
While the game does support playing levels with filenames that don't
have the .vvvvvv extension, it doesn't do it well.
Namely, those files can't be loaded or saved into the editor (because a
.vvvvvv always gets tacked on to your input when saving or loading). In
2.3, this gets worse because you can't load a level without a .vvvvvv
extension from command-line playtesting (because a .vvvvvv automatically
gets added) and you can't load per-level custom assets.
The only place where extensionless level files are supported is when
loading level metadata. But this makes it so they no longer work. This
is technically an API break, but it's easily fixed (just add the
.vvvvvv), plus there's nothing to be gained from not having an
extension, plus basically no one ever actually did this in the first
place (as far as I know, I am the only person to have ever done this,
and no one else ever has).
This fixes an issue where you would be able to mount things other than
custom assets in per-level custom asset directories and zips.
To be fair, the effects of this issue were fairly limited - about the
only thing I could do with it was to override a user-made quicksave of a
custom level with one of my own. However, since the quicksave check
happens before assets are mounted, if the user didn't have an existing
quicksave then they wouldn't be able load my quicksave. Furthermore,
mounting things like settings.vvv simply doesn't work because assets
only get mounted when the level gets loaded, but the game only reads
from settings.vvv on startup.
Still, this is an issue, and just because it only has one effect doesn't
mean we should single-case patch that one effect only. So what can we
do?
I was thinking that we should (1) mount custom assets in a dedicated
directory, and then from there (2) mount each specific asset directly -
namely, mount the graphics/ and sounds/ folders, and mount the
vvvvvvmusic.vvv and mmmmmm.vvv files. For (1), assets are now mounted at
a (non-existent) location named .vvv-mnt/assets/. However, (2) doesn't
fully work due to how PhysFS works.
What DOES work is being able to mount the graphics/ and sounds/ folders,
but only if the custom assets directory is a directory. And, you
actually have to use the real directory where those graphics/ and
sounds/ folders are located, and not the mounted directory, because
PHYSFS_mount() only accepts real directories. (In which case why bother
mounting the directory in the first place if we have to use real
directories anyway?) So already this seems like having different
directory and zip mounting paths, which I don't want...
I tried to unify the directory and zip paths and get around the real
directory limitation. So for mounting each individual asset (i.e.
graphics/, sounds/, but especially vvvvvvmusic.vvv and mmmmmm.vvv), I
tried doing PHYSFS_openRead() followed by PHYSFS_mountHandle() with that
PHYSFS_File, but this simply doesn't work, because PHYSFS_mountHandle()
will always create a PHYSFS_Io object, and pass it to a PhysFS internal
helper function named openDirectory() which will only attempt to treat
it as a directory if the PHYSFS_Io* passed is NULL. Since
PHYSFS_mountHandle() always passes a non-NULL PHYSFS_Io*,
openDirectory() will always treat it like a zip file and never as a
directory - in contrast, PHYSFS_mount() will always pass a NULL
PHYSFS_Io* to openDirectory(), so PHYSFS_mount() is the only function
that works for mounting directories.
(And even if this did work, having to keep the file open (because of the
PHYSFS_openRead()) results in the user being unable to touch the file on
Windows until it gets closed, which I also don't want.)
As for zip files, PHYSFS_mount() works just fine on them, but then we
run into the issue of accessing the individual assets inside it. As
covered above, PHYSFS_mount() only accepts real directories, so we can't
use it to access the assets inside, but then if we do the
PHYSFS_openRead() and PHYSFS_mountHandle() approach,
PHYSFS_mountHandle() will treat the assets inside as zip files instead
of just mounting them normally!
So in short, PhysFS only seems to be able to mount directories and zip
files, and not any loose individual files (like vvvvvvmusic.vvv and
mmmmmm.vvv). Furthermore, directories inside directories works, but
directories inside zip files doesn't (only zip files inside zip files
work).
It seems like our asset paths don't really work well with PhysFS's
design. Currently, graphics/, sounds/, vvvvvvmusic.vvv, and mmmmmm.vvv
all live at the root directory of the VVVVVV folder. But what would work
better is if all of those items were organized into a subfolder, for
example, a folder named assets/. So the previous assets mounting system
before this patch would just have mounted assets/ and be done with it,
and there would be no risk of mounting extraneous files that could do
bad things. However, due to our unorganized asset paths, the previous
system has to mount assets at the root of the VVVVVV folder, which
invites the possibility of those extraneous bad files being mounted.
Well, we can't change the asset paths now, that would be a pretty big
API break (maybe it should be a 2.4 thing). So what can we do?
What I've done is, after mounting the assets at .vvv-mnt/assets/, when
the game loads an asset, it checks if there's an override available
inside .vvv-mnt/assets/, and if so, the game will load that asset
instead of the regular one. This is basically reimplementing what PhysFS
SHOULD be able to do for us, but can't. This fixes the issue of being
able to mount a quicksave for a custom level inside its asset directory.
I should also note, the unorganized asset paths issue also means that
for .zip files (which contain the level file), the level file itself is
also technically mounted at .vvv-mnt/assets/. This is harmless (because
when we load a level file, we never load it as an asset) but it's still
a bit ugly. Changing the asset paths now seems more and more like a good
thing to do...
This will clarify which directory, exactly, failed to mount. I know it
gets printed earlier in the mounting process, but it can't hurt to print
it twice, just to be sure. Also this is for consistency.
Default function arguments are the devil, and it's better to be more
explicit about what you're passing into the function. Also because we
might become C-only in the future and to help faciliate that, we should
get rid of C++-isms like default function arguments now.
PHYSFS_getDirSeparator() already gets called and stored in pathSep at
the top of FILESYSTEM_init(). So clearly, two people worked on this
function and forgot that both pieces of code existed at the same time
(or it was one person independently forgetting both).
PhysFS uses platform-independent notation, so we really don't need to
care about getting the correct dir separator here. Especially since we
don't ever do so anywhere else (e.g. load/saveTiXml2Document()), either.
This is to make it clear that this is not a general-purpose mounting
function; it is a helper function for FILESYSTEM_mountAssets()
specifically for treating a directory or file as an assets directory,
and mounting assets from there.
There's no reason to handle mounting .zip files differently than
mounting a directory... we already mount .data.zip files using
FILESYSTEM_mount(), so why go through the trouble of opening a .zip
manually (which means on Windows the .zip can't be touched for the
duration of playing the custom level), making up a place to mount it at,
and then mount that made-up name, instead of just using
FILESYSTEM_mount()?
Whoever cobbled this asset mounting thing together really didn't fully
understand what they were doing.
This way, we avoid the unnecessary graphics.reloadresources() call - if
we can't mount assets, why bother reloading resources?
The return type of FILESYSTEM_mount() has been changed from void to bool
to indicate success, accomodating its callers accordingly.
I haven't been able to reproduce this old thing on any setup I have. The patch
from 2013 was originally for X11, and Wayland's fullscreen doesn't allow for
this sort of thing, so let's start scoping this down for eventual removal when
X11 is finally out of our minds forever.
So it looks like facb079b35 (PR #316) had
a few issues.
The SDL performance counter doesn't really work that well. Testing
reveals that unfocusing and focusing the game again results in
the resumemusic() script command resuming the track at the wrong time.
Even when not unfocusing the game at all, stopping a track and resuming
it resumes it at the wrong time. (Only disabling the unfocus pause fixes
this.)
Furthermore, there's also the fact that the SDL performance counter
keeps incrementing when the game is paused under GDB. So... yeah.
Instead of dealing with the SDL performance counter, I'm just going to
pause and resume the music directly (so the stopmusic() script command
just pauses the music instead). As a result, we no longer can keep
constantly calling Mix_PauseMusic() or Mix_ResumeMusic() when focused or
unfocused, so I've moved those calls to happen directly when the
relevant SDL events are received (the constant calls were originally in
VCE, and whoever added them (I'm pretty sure it was Leo) was not the
sharpest tool in the shed...).
And we are going to switch over to using our own fade system instead of
the SDL mixer fade system. In fact, we were already using our own fade
system for fadeins after collecting a trinket or a custom level
crewmate, but we were still using the mixer system for the rest. This is
an inconsistency that I am glad to correct, so we're also doing our own
fadeouts now.
There is, however, an issue with the fade system where the length it
goes for is inaccurate, because it's based on a volume-per-frame second
calculation that gets truncated. But that's an issue to fix later - at
least what I'm doing right now makes resumemusic() and musicfadein()
work better than before.
musicclass already had a resume() function for music.
These are just wrappers around the appropriate SDL_mixer functions, to
avoid direct function calls to the mixer API. So if we ever need to do
something with all callers of pausing and resuming in the future, or we
switch to a different audio backend, the work is already done for us.
Also it just looks cleaner to be calling our musicclass function instead
of doing a direct API call to the mixer.
This makes it so to reuse this code, we don't have to copy-paste it.
Additionally, I added a check for the milliseconds being 0, to avoid a
division by zero. Logically and mathematically, if the fade amount is 0
milliseconds, then that means the fade should happen instantly -
however, dividing by zero is undefined (both in math and in C/C++), so
this check needs to be added.
This is an option for speedrunners whose muscle memory is precisely
trained and used to the 1-frame input delay that existed in 2.2 and
below. It is located in Game Options -> Advanced Options, and is off by
default.
To re-add the 1-frame input delay, we simply move the key.Poll() to the
start of the frame, instead of before an input function gets ran -
undoing what #535 did.
There is a frame ordering-sensitive issue here, where toggling
game.inputdelay at the wrong time could cause double-polling. However,
we only toggle it in an input function, which regardless is always
guaranteed to be ran after key.Poll() (it either happened at the start
of the frame or just before the input function got ran), so this is not
an issue. But, in case we ever need to toggle this variable in the
future, we can just use the defer callbacks system to defer the toggle
to the end of the frame - also added by #535.
Added at the request of Habeechee on the VVVVVV speedrunning Discord
server.
This fixes being unable to use teleporters while the "- Press ACTION to
advance text -" prompt is up, which is used to perform credits warp.
In 2.2 and 2.0, this advancetext check was only in gamerender() for
rendering the "- Press ENTER to Teleport -" prompt and didn't affect any
logic. In 2.3, I moved the check (and the rest of the conditional it was
in) to gamelogic() - same as the activity zone prompt conditionals - so
if you gained control while being in a prompt zone, the prompt wouldn't
suddenly appear[1].
As a side effect, this ended up aligning rendering and logic together,
so if you couldn't see the teleporter prompt, you weren't able to
teleport - whereas in 2.2 and 2.0, you could still use the teleporter
even though the prompt wasn't up.
So by removing the advancetext check, you are now able to use the
teleporter again, AND the "- Press ENTER to Teleport -" prompt will also
show up as well.
Habeechee reported this regression on the VVVVVV speedrunning Discord
server.
[1]: f07a8d2143, PR #421
One of the solutions to the quit signal unfocus pause regression is to
add a no-op delta func to the unfocused func table. However, this
results in the game being stuck in unfocus pause forever, because when
it reaches the end of a list on a delta func, it won't reassign the
active functions - only when the end of a list is a fixed func will it
do so. A workaround is to then add a no-op fixed func afterwards, but
that's inelegant.
The solution in the end to the quit signal regression is to not bother
with adding a delta func, so the game as of right now actually never has
a delta func at the end of a list, and probably never will - but this is
one piece of technical debt I don't want to leave laying around. In case
we're ever going to put a delta function at the end of a list, I've made
it so that delta functions will now reassign the list of active funcs if
they happen to be at the end of the func list.
This fixes a regression introduced by #535 where a quit signal (e.g.
Ctrl-C) sent to the window while the game was in unfocus pause wouldn't
close the game.
One problem was that key.quitProgram would only be checked when control
flow switched back to the outer loop in main(), which would only happen
when the loop order state machine switched to a delta function. As the
unfocused func table didn't have any delta functions, this means
key.quitProgram would never be checked.
So a naïve solution to this would just be to add a no-op delta func
entry to the unfocused func table. However, we then run into a separate
issue where a delta function at the end of a func list never reassigns
the active funcs, causing the game to be stuck in the unfocus pause
forever. Active func reassignment only happens after fixed funcs. So
then a naïve solution after that would be to simply add a no-op fixed
func entry after that. And indeed, that would fix the whole issue.
However, I want to do things the right way. And this does not seem like
the right way. Even putting aside the separate last-func-being-delta
issue, it mandates that every func list needs a delta function. Which
seems quite unnecessary to me.
Another solution I considered was copy-pasting the key.quitProgram check
to the inner loops, or adding some sort of signal propagation to
the inner loops - implemented by copy-pasting checks after each loop -
so we didn't need to copy-paste key.quitProgram... but that seems really
messy, too.
So, I realized that we could throw away key.quitProgram, and simply call
VVV_exit() directly when we receive an SDL_QUIT event. This fixes the
issue, this removes an unnecessary middleman variable, and it's pretty
cleanly and simply the right thing to do.
This includes all text from the Gravitron and Super Gravitron.
This is to make the text more readable if they are placed in weird
situations - for example, in custom levels, where the background these
texts get placed on could be anything (custom level makers are crazy!).
It's just like bigprint() except it duplicates some of the calculations
because I didn't want to make a bigprintoff() function which would
duplicate even more code. I'm beginning to think these text printing
functions are completely horrible to work with...
In case they get drawn against a non-contrasting background, it's still
useful to keep them readable by outlining them. This could happen if
someone were to use the Game Complete gamestate sequence in a custom
level (or presses R during Game Complete).
Flip Mode flips all the unfocus pause screen text upside-down, to make
it read in reverse order. This looks kind of strange to me, and I don't
think it was intended. So I'm flipping the text again so it's the right
way up in Flip Mode.
During the final stretch, after Viridian turns off the Dimensional
Stability Generator, the map goes all psychedelic and changes colors
every 40 frames. Entities change their colors too, including conveyors,
moving platforms, and disappearing platforms.
But play around with the disappearing platforms for a bit and you'll
notice they seem a bit glitchy. If you run on them at the right time,
the tile they use while disappearing seems to abruptly change whenever
the color of the room changes. If there's a color change while they're
reappearing (when you die and respawn in the same room as them), they'll
have the wrong tile and look like a conveyor. And even if you've never
interacted with them at all, dying and respawning in the same room as
them will change their tile to something wrong and also look like a
conveyor.
So, what's the problem? Well, first off, the tile of every untouched
disappearing platform changing into a conveyor after you die and respawn
in the same room is caused by a block of code in gamelogic() that gets
run on each entity whenever you die. This block of code is the exact
same block of code that gets ran on a disappearing platform if it's in
the middle of disappearing.
As a quick primer, every entity in the game has a state, which is just a
number. You can view each entity's state in
entityclass::updateentities().
State 0 of disappearing platforms is doing nothing, and they start with
an onentity of 1, which means they turn to state 1 when they get
touched. State 1 moves to state 2. State 2 does some decrementing, then
moves to state 3 and sets the onentity to 4. State 3 also does nothing.
After being touched, state 4 makes the platform reappear and move to
state 5, but state 5 does the actual reappearing; state 5 then sets the
state back to 0 and onentity back to 1.
So, back to the copy-pasted block of code. The block of code was
originally intended to fast-forward disappearing platforms if they were
in the middle of disappearing, so the player respawn code would properly
respawn the disappearing platform, instead of leaving it disappeared.
What it does is keep updating the entity, while the state of the entity
is 2, until it is no longer in state 2, then sets it to state 4.
Crucially, the original block of code only ran if the disappearing
platform was in state 2. But the other block of code, which was
copy-pasted with slight modifications, runs on ALL disappearing
platforms in final stretch, regardless of if they are in state 2 or not.
Thus, all untouched platforms will be set to state 4, and state 4 will
do the animation of the platform reappearing, which is invalid given
that the platform never disappeared in the first place. So that's why
dying and respawning in the same room as some disappearing platforms
during final stretch will change their tiles to be conveyors.
It seems to me that doing anything with death is wrong, here. The root
cause is that map.changefinalcol() "resets" the tile of every
disappearing platform, which is a function that gets called on every
color change. The color change has nothing to do with dying, so why
fiddle with the death code?
Thus, I've deleted that entire block of code.
What I've done to fix the issue is to make it so the tile of
disappearing platforms aren't manually controlled. You see, unlike other
entities in the game, the tile of disappearing platforms gets manually
modified whenever it disappears or reappears. Other entities use the
tile as a base and store their tile offset in the separate walkingframe
attribute, which will be added to the tile attribute to produce the
drawframe, which is the final thing that gets rendered - but for
disappearing platforms, their tile gets directly incremented or
decremented whenever they disappear or reappear, so when
map.changefinalcol() gets ran to update the tile of every platform and
conveyor, it basically discards the tile offset that was manually added
in.
Instead, what I've done is make it so disappearing platforms now use
walkingframe, and thus their final drawframe will be their tile plus
their walkingframe. Whenever map.changefinalcol() gets called, it is now
free to modify the tile of disappearing platforms accordingly - after
all, the tile offset is now stored in walkingframe, so no weird
glitchiness can happen there.
Ethan, you forgot this other one.
I do have to rejiggle the control flow of the function a bit, so it
doesn't leak memory upon failure. (Although the SDL message box leaks
memory anyway because of X11 so... whatever.) Also, there's a NULL check
for if SDL_GetBasePath() fails now.
According to SDL documentation[1], the returned pointer needs to be
freed. A glance at the source code confirms that the function allocates,
and also Valgrind complains about it.
Also if it couldn't allocate, the game no longer segfaults (std::strings
do not check if the pointer is non-NULL for operator+=).
[1]: https://wiki.libsdl.org/SDL_GetClipboardText
Since mainmenu is only ever used in Input.cpp, I might as well make it
clearer by moving it into a static global variable in Input.cpp. (The
same applies to fadetolab/fadetomenu, but I didn't think much about
those at the time... that'll be a refactor for later.)
While I've decoupled fademode from gamemode starting, being faded out on
the title screen results in a black screen and you being unable to make
any input. So we'll need to store the current fademode in a temporary
variable when going to in-game options, then put it back when we return
to the pause menu. Yes, you can turn on glitchrunner mode during the
in-game options, and then immediately return to the pause menu to
instantly go back to the title screen; this is intended.
Due to frame ordering, putting the fademode back needs to be deferred to
the end of the frame to prevent a 1-frame flicker.
It's actually sufficient enough to do this temporary fademode storage to
fix the whole thing, but I also decided to decouple fademode and
gamemode starting just to be sure.
Assuming glitchrunner mode is off, if you open the pause menu while
fully faded-out and then go to Graphic Options or Game Options, then the
'mode' that you selected previously will kick in again and you'll be
suddenly warped back.
So if you previously started a new game in the main game (mode 0, also
the selected mode if you do this from command-line playtesting), and
then open the pause menu and go to in-game options, then you'll suddenly
go back to starting a new game again. If you had started a custom level,
doing this will warp you back to the start of the level again.
The problem is simple - when the title screen is fully faded out, it
calls startgamemode(). So the solution is simple as well - just decouple
the fademode from calling startgamemode(), and use a different variable
to know when to actually call startgamemode().
Custom levels can have warp lines. If you have a warp line and a warping
background in the same room, the warp line takes precedence over the
warp background.
However, whenever you enter a room with a warp line and warp background,
any entities on the warping edges will be drawn with screenwrapping for
one frame, even though they never wrapped at all.
This is due to frame ordering: when the warp line gets created,
obj.customwarpmode gets set to true. Then when the screen edges and
warping logic gets ran, the very first thing that gets checked is this
exact variable, and map.warpx/map.warpy get set appropriately - so
there's no way the entity could legitimately screenwrap.
However, that happens in gamelogic(). gamelogic() is also the one
responsible for creating entities upon room load, but that happens after
the obj.customwarpmode check - so when the game gets around to rendering
in gamerender(), it sees that map.warpx or map.warpy is on, and draws
the screenwrapping, even though map.warpx/map.warpy aren't really on at
all. Only when gamelogic() is called in the frame later do map.warpx and
map.warpy finally get set to false.
To fix this, just set map.warpx and map.warpy to false when creating
warp lines.
I just spotted this one - if vy isn't bounds-checked, this causes bogus
input from the createentity() script command to commit Undefined
Behavior. Should've spotted this one when I was adding bounds checks to
the rest of createentity() earlier, but at least it's fixed now.
This makes it easier to add bounds checks to all accesses of
map.explored. Also, all manually-written existing bounds checks have
been removed, because they're going to go into the new getters and
setters.
The getter is mapclass::isexplored() and the setter is
mapclass::setexplored().
It is no longer possible to cause Undefined Behavior via accessing
out-of-bounds room properties.
What happens instead is - if you attempt to fetch an out-of-bounds room
property, you get a "blank" room property that just has all of the
defaults, plus its tileset is 1 because all tilesets that are nonzero
use tiles2.png, and it closely emulates the previous behavior where it
was some bogus value but definitely not zero. Its Direct Mode is also 1,
because the tiles contained within it are just mishmashed repeats of
existing tiles on the map, and we shouldn't autotile that.
The roomname also gets cleared in case the user attempts to set the room
name of an out-of-bounds room property.
If you attempt to set the property of an out-of-bounds room property,
then nothing happens.
This replaces all raw ed.level accesses with new setter and getter
funcs, which makes it easier to add bounds checks later. And I've also
removed all the manually-written bounds checks, since they will go into
the new getter and setter.
To get the room properties of a specific room, you use
editorclass::getroomprop(), which returns a pointer to the room
properties - then you just read off of that pointer. To set a room
property, you use editorclass::setroom<PROP>(), where <PROP> is the name
of the property. These are maintained using X macros to avoid
copy-pasting. editorclass::getroompropidx() is a helper function and
shouldn't be used directly.
This removes all traces of Undefined Behavior from getting and placing
tiles.
This mimics the previous behavior (2.2 and below) as reasonably as
possible. `vmult` was previously a vector, there was a bunch of unused
space directly after the end of the usable space of the vector, which
was all filled with zeroes. The same goes for `contents`, having
previously been a vector, and so having a bunch of zeroes immediately
following the end of the in-bounds space. That's why both are 0 if you
index them out of bounds.
This makes it easier to add bounds checks to all accesses of
ed.contents.
To do this, I've added editorclass::gettile(), editorclass::settile(),
and editorclass::getabstile() (with a helper function of
editorclass::gettileidx() that really shouldn't be used directly), and
replaced all raw accesses of ed.contents with those functions
appropriately.
This also makes the code more readable, as a side effect.
The existing bounds checks were correct sometimes but other times were
not.
The bounds check for 2x2 and 2x1 sprites only covered the top-left
sprite drawn; the other sprites could still be out of bounds. But if the
top-left sprite was out of bounds, then none of the other sprites
wouldn't be drawn - although it ought to be that the other sprites still
get attempted to be drawn. So I've updated the bounds checks
accordingly, and now an out of bounds top-left sprite won't prevent the
drawing of the rest of the sprites.
Similarly, if the sprite of a Gravitron square was out of bounds, that
would prevent its indicators from being drawn. But the indicators
weren't being bounds-checked either (2.3 lets you have less than 1200
tiles in a given tilesheet). So the bounds check has been moved to only
cover the drawframe and the indicator indexes accordingly, and an out of
bounds sprite won't prevent attempting to draw the indicators.
It is possible for any of the QueryIntAttribute()s to fail, most
commonly if the attributes don't exist. If that happens, then that part
of the temporary edentity won't be initialized, and we'll end up having
a partially-uninitialized edentity - then doing much of anything with it
will result in undefined behavior.
To fix this, just initialize the temporary edentity.
If an XML tag doesn't contain anything inside, pText will be NULL. If
that happens without being checked, then NULL will be passed to
SDL_strcmp(). SDL_strcmp() will either call libc strcmp() or use its own
implementation; both implementations will still dereference the NULL
without checking it.
This is undefined behavior, so I'm fixing it. The solution is to do what
is done with all other XML parsing functions, and to make sure pText
gets set to a safe empty string (which is just a pointer to a null
terminator) if it happens to be NULL.
PR #279 added game.gametimer solely for the editor ghosts feature. It
seems that whoever originally wrote it (Leo for the now-dead VVVVVV:
Community Edition, I believe) forgot that the game already had its own
timer, that they could use.
The game timer does increment on unfocus pause (whereas this doesn't),
but that's a separate issue, and it ought to not do that.
So #434 didn't end up solving the deltaframe flashing fully, only
reduced the chances that it could happen.
I've had the Level Complete image flash a few times when the Game Saved
text box pops up. This seems to be because the Level Complete image is
based off of the text box being at y-position 12, and the Game Saved
text box is also at y-position 12. Level Complete only gets drawn if the
text box additionally has a red channel value of 165, and the Game Saved
text box has a red channel value of 174. However, there is a check that
the text box be fully opaque first before drawing special images. So
what went wrong?
Well, after thinking about it for a while, I realized that even though
there is indeed an opaqueness check, the alpha of the text box updates
BEFORE it gets drawn. And during the deltaframes immediately after it
gets updated, the text box is considered fully opaque. It's completely
possible for the linear interpolation to end up with a red channel value
of 165 during these deltaframes, while the text box is opaque as well.
As always, it helps if you have a high refresh rate, and run the game
under 40% slowdown.
Anyways, so what's the final fix for this issue? Well, use the text box
'target' RGB values instead - its tr/tg/tb attributes instead of its
r/g/b attributes. They are not subject to interpolation and so are
completely reliable. The opaqueness check should still be kept, though,
because the target values don't account for opaqueness. And this way, we
get no more deltaframe flashes during text box fades.
An even better fix would be to not use magic RGB values to draw special
images... but that'd be something to do later.
Clang warns on this. This doesn't fix anything but it does ensure that
whoever's reading it won't be focused as to whether or not omitting the
second set of braces is legal or not.
Previously, with the wrong loop order, this kludge needed to exist so
entities in finalmode didn't have wrong colors for 1 frame when entering
a room. But now the loop order has been fixed, and so this kludge is no
longer needed.
In 2.2, at render time, the game rendered screenshakes and flashes if
their timers were above 0, and then decremented them afterwards. The
game would also update the analogue filter right before rendering it,
too.
In 2.3, this was changed so the flash and screenshake timers were
unified, and also done at the end of the frame - right before rendering
happened. This resulted in 1-frame flashes and screenshakes not
rendering at all. The other changes in this patchset don't fix this
either. The analogue filter was also in the wrong order, but that is
less of an issue than flashes and screenshakes.
So, what I've done is made the flash and screenshake timers update right
before the loop switches over to rendering, and only decrements them
when we switch back to fixed functions (after rendering). The analogue
filter is also updated right before rendering as well. This restores
1-frame flashes and screenshakes, as well as restores the correct order
of analogue filter updates.
This reintroduces 2-frame edge-flipping after the 1-frame input delay
got removed. This is because along with processing input and moving
Viridian, logical onground/onroof assignments need to processed in the
same between-render sequence as well - otherwise Viridian only gets 1
frame of edge-flipping due to frame ordering.
I will need to separate these into two different variables because I
will need to move logical onground/onroof assignments to the start of
gamelogic() - if I kept them together, however, that would change the
visuals of onground/onroof, which I want to keep consistent with 2.2.
To do this, GAMEMODE input needs to be processed, and Viridian needs to
be moved, in the same sequence between render frames. So just move
gameinput to after gamerender. Yes, this is not 2.2 order, but gameinput
only handles player input and nothing else - plus a 1-frame input delay
feels really awful to play with in over-30-mode.
In order to re-remove the 1-frame input delay, we will have to poll
input right after rendering a frame - in other words, just before an
input function gets called.
To do this, I've added a new function enum type - Func_input - that is
the same as a fixed function, but before its function gets called,
key.Poll() gets called. And all input functions have been updated to use
this enum accordingly.
This once again fixes the facing directions of crewmates upon room load,
except now it covers more cases.
So, here is the saga so far:
- 2.0 (presumably) to 2.2: crewmate direction fix is special-cased at
the end of mapclass::loadlevel(). Only covers crewmates created during
the room load, does not cover crewmates created from scripts, only
covers state 18 of crewmates.
- 2.3 currently (after #220): crewmate direction fix is moved to
entityclass::createentity(), which covers every avenue of crewmate
creation (including from scripts), but still only covers state 18.
- This commit: crewmate direction fix now covers every possible state of
the crewmate, also does not copy-paste any code.
What I've done instead is to make it so createentity() will immediately
call updateentities() on the pushed-back entity. This is kludge-y, but
is completely okay to do, because unlike other entities, crewmate
entities never change their state or have any side-effects from
double-evaluation, meaning calling updateentities() on them is
idempotent and it's okay to call their updateentities() more than once.
This does have the slight danger that if the states of crewmates were to
change in the future to no longer be idempotent, this would end up
resulting in a somewhat hard-to-track-down double-evaluation bug, but
it's worth taking that risk.
This fix is not applied to entity 14 (the supercrewmate) because it is
possible that calling updateentities() on it will immediately remove the
entity, which is not idempotent (it's changing the state of something
outside the object). Supercrewmates are a bit difficult to work with
outside of the main game anyways, and if you spawn them you could
probably just use the changedir() script command to fix their direction,
so I'm not inclined to fix this for them anyway.
This copy-pasted code only existed because the previous loop order was
incorrect and rendered entities before they would get properly updated
by the fixed render function. Now, the fixed render function is
guaranteed to be called before the render function, so we can rely on
that to update the drawframe and realcol of entities instead of
duplicating the code ourselves in createentity().
The drawframe assignment is still kept to fix the case where dying while
completestop is active (i.e. during a trinket or crewmate rescue
cutscene) and respawning in a different room won't turn everything into
Viridian sprites.
The background would change for 1 frame before sending you back to the
pause menu or editor settings. The map.nexttowercolour() call needs to
be deferred until the end of the frame.
The new loop order introduces a glitch where the menu would display
whichever menu was saved to kludge_ingametemp for 1 frame right as the
user returned to the pause menu. This happened because the
game.returntomenu() happens in titleinput(), which comes before
titlerender(). To fix this, we just need to defer it to the end of the
frame.
game.shouldreturntoeditor was added to fix a frame ordering issue that
was causing a bug where if you started playtesting in a room with a
horizontal/vertical warp background, and exited playtesting in a
different room that also had a horizontal/vertical warp background and
which was different, then the background of the room you exited in would
slowly scroll offscreen, when you re-entered the editor, instead of the
background consisting entirely of the actual background of the room.
Namely, the issue was that the game would render one more frame of
GAMEMODE after graphics.backgrounddrawn got set to false, and re-set it
to true, thus negating the background redraw, so the editor background
would be incorrect.
With defer callbacks, we can now just use a couple lines of code,
instead of having to add an extra kludge variable and putting handling
for it all over the code.
Sometimes, there needs to be code that gets ran at the end of the game
loop, otherwise rendering issues might occur. Currently, we do this by
special-casing each deferred routine (e.g. shouldreturntoeditor), but it
would be better if we could generalize this deference instead.
Deferred callbacks can be added using the DEFER_CALLBACK macro. It takes
in one argument, which is the name of a function, and that function must
be a void function that takes in no arguments. Also, due to annoying C++
quirks, void functions taking no arguments cannot be attributes of
objects (because they have an implicit `this` parameter), so it's
recommended to create each callback separately before using the
DEFER_CALLBACK macro.
Otherwise, the player would appear to "zip" during the deltaframes
between their previous position and their new position. This did not
happen in the previous game loop order and only happens in the new one.
Previously, before the game loop order got fixed, going to the in-game
settings would switch over to the new render function too early, causing
a deltaframe glitch that had to be fixed. But now, the render function
only gets switched when the current gamestate's function list gets
finished executing, so the game won't suddenly switch to titlerender()
in the middle of the ACTION press to the in-game settings screen.
As a consequence, titleupdatetextcol() no longer needs to be exported to
Input.cpp.
The previous location of this loop was placed there because it happened
just after the end of the render function. Now that the loop order is
fixed, the first thing that happens after the render function is the
start of gamelogic(), so this loop should go there now, else entity
positions won't be interpolated.
Also it now preincrements instead of postincrements because I like
preincrements.
Okay, so the reason why all render functions were moved to the end of
the frame in #220 is because it's simpler to call two fixed functions
and then a delta function instead of one fixed function, then a delta
function, and then another fixed function.
This is because fixed functions need special handling inside
deltaloop(), and you can't simply duplicate this handling after calling
a delta function. Oh, and to make matters worse, it's not always
fixed-delta-fixed, sometimes (like in MAPMODE and TELEPORTERMODE) it's
delta-fixed-fixed, so we'd need to handle that somehow too.
The solution here is to generalize the game loop and factor out each
function, instead of hardcoding it. Instead of having hardcoded
case-switches directly in the loop, I made a function that returns an
array of functions for a given gamestate, along with the number of
functions, then the game loop processes it accordingly. In fixedloop(),
it iterates over the array and executes each function until it reaches a
delta function, at which point it stops. And when it reaches the end of
the array, it goes back to the start of the array.
But anyway, if it gets to a delta function, it'll stop the loop and
finish fixedloop(). Then deltaloop() will call the delta function. And
then on the next frame, the function index will be incremented again, so
fixedloop() will call the fixed functions again.
Actually, the previous game loop was actually made up of one big loop,
with a gamestate function loop nested inside it, flanked with code that
ran at the start and end of the "big loop". This would be easy to handle
with one loop (just include the beginning and end functions with the
gamestate functions in the array), except that the gamestate functions
could suddenly be swapped out with unfocused functions (the ones that
run when you unfocus the window) at any time (well, on frame boundaries,
since key.isActive only got checked once, guarding the entire "inner
loop" - and I made sure that changing key.isActive wouldn't immediately
apply, just like the previous game loop order) - so I had to add yet
another layer of indirection, where the gamestate functions could
immediately be swapped out with the unfocused functions (while still
running the beginning and end code, because that was how the previous
loop order worked, after all).
This also fixes a regression that the game loop that #220 introduced
had, where if the fixed functions switched the gamestate, the game would
prematurely start rendering the gamestate function of the new gamestate
in the deltaframes, which was a source of some deltaframe glitches. But
fixing this is likely to just as well cause deltaframe glitches, so it'd
be better to fix this along with fixing the loop order, and only have
one round of QA to do in the end, instead of doing one round after each
change separately.
Fixes #464... but this isn't the end of the patchset. There are bugs
that need to be fixed, and kludges that need to be reverted.
Y-position 180 would be the position of the Level Complete and Game
Complete special text boxes in Flip Mode. However, since the y-position
of flipme text boxes actually no longer change (because we have to
accomodate changing Flip Mode on-the-fly), these text boxes will never
actually be y-position 180 - so we should remove these checks for
clarity.
A-ha! I've spotted an inconsistency! The normal trinket collection text
boxes (gamestate 1000-1003) is aware of Flip Mode, and will position
themselves accordingly to read the correct way in Flip Mode. However,
foundtrinket() doesn't do this.
Well, now it does.
This is why the text box attribute was named flipme, after all.
You may have noticed that the flipme command inverts textflipme instead
of simply setting it to true. Well, that's because it should be the same
as the previous behavior, which was essentially to invert it instead of
setting it to true - i.e. calling flipme twice would keep the original
text box position in Flip Mode, which means it would be upside-down
(this is a lot of flipping to keep track of...) - because flipme added
to texty in-place instead of simply assigning to it. (It did the
calculation incorrectly in 2.2 and previous, but I digress.)
Similarly, textflipme is not reset in hardreset(), because none of the
other script text box variables are reset either.
This ensures that if the player decides to toggle Flip Mode while one of
these text boxes is up, they won't be oriented improperly. Additionally,
it also de-duplicates a bunch of Flip Mode check code, which is also a
win.
createtextboxreal() is the same as createtextbox(), but with a flipme
parameter added to create text boxes that have their flipme attribute
set to true. createtextbox() just calls createtextboxreal() with flipme
set to false, and createtextboxflipme() just calls createtextboxreal()
with flipme set to true; this is because I do not want to use C++
function overloading.
Instead of calculating the y-position of the text box when it's created,
we will store a flag that says whether or not the text box should be
flipped in Flip Mode (and thus stay right-side-up), and when it comes
time to draw the text box, we will check Flip Mode and calculate the
position then.
Instead of duplicating the same variables over and over again,
Graphics::drawgui() can just make its own SDL_Rect. It's not that hard.
As far as I can tell, textrect was always being properly kept up to date
by the time Graphics::drawgui() got around to rendering
(textboxclass::resize() keeps being called a LOT), so this shouldn't be
a noticeable change from the user perspective.
The "Game Saved" text box, along with its associated telesave() call,
exists in both Game.cpp and Script.cpp, so one of them is the copy-paste
of the other. Unfortunately this copy-paste resulted in an inconsistency
where both of them don't check for the same things when deciding whether
or not the telesave should actually happen (this is why you don't
copy-paste, kids... it's scary!).
Either way, de-duplicating this now is less work for me later.
Every Level Complete sequence is the same copy-pasted thing, but with
minor changes. To make my work easier, I'm de-duplicating them so I have
less text boxes to change later, and less grind to grind.
These default arguments are never used anywhere. And if they were used
anywhere, it'd be better to explicitly say 255,255,255 than make readers
have to look at the header file to see what these default to. Also, this
creates four different overloads of createtextbox(), instead of only
two - but we ought to not be using function overloading anyway.
These commented-out code blocks just get in the way of clarity when I'm
refactoring flipped textboxes created in the gamestate system. So I'm
getting rid of them. If we need them back, we always have Git history.
Since the only difference is the y-positions, I've decided to remove the
copy-pasted code. A better solution would be to have a function that
draws multiline text and handles it accordingly in Flip Mode, but that
could be done later.
The only difference between Flip Mode and normal mode is the y-position
and sprite used to draw the crewmates. Everything else is the same, so
I've removed the copy-pasted portion.
The diff might look a bit ugly due to the unindentation.
Since the only difference in Flip Mode is the positiveness/negativeness
of the iterator variable, plus the starting y-offset, I've removed the
copy-pasted code and did this instead.
The diff might look a bit ugly due to the unindentation.
Like cutscene bars, I've added Graphics::setfade(), to ensure that no
deltaframe rendering glitches happen due to oldfadeamount not being
updated properly.
And indeed, this fixes a deltaframe rendering glitch that happens if you
return to the editor from playtesting on a faded-out screen, then fade
out again (by either re-entering playtesting and then cause a fadeout to
happen again, or by quitting from the editor afterwards). The same
glitch also happens outside of in-editor playtesting if you exit to the
menu while the screen is faded out.
To do this, I've added Graphics::setbars(), to make sure
oldcutscenebarspos always gets assigned when cutscenebarspos is. This
fixes potential deltaframe rendering issues if these two mismatch.
While working on #535, I noticed that editormenuactionpress() still
didn't do the explicit void declaration. Then I ran `rg 'void.*\(\)'`
and found three other functions that I somehow missed in #628. Whoops.
Well, now they no longer are missed.
This is a small quality-of-life tweak that makes it so if you're in the
middle of editing a level, you don't have to save the level, exit to the
menu, change whatever setting you wanted, re-enter the editor, and type
in the level name, just to change one setting. This is the same as
adding Graphic Options and Game Options to the in-game pause menu,
except for the editor, too.
To do this, I'm reusing Game::returntopausemenu() (because all of its
callers are the same callers for returning to editor settings) and
renamed it to returntoingame(), then added a variable named
ingame_editormode to Game. When we're in the options menus but still in
the editor, BOTH ingame_titlemode and ingame_editormode will be true.
This is a small quality-of-life thing that makes it so you don't have to
move your menu selection all the way over to the "return" button in
order to return to the previous menu. You can just press Escape instead
to return to the previous menu. The previous behavior of pressing Escape
was to bring up the 'confirm quit' menu, or if you were in an options
menu in-game, return to the pause menu.
If you're on the main menu (and thus don't have any previous menu) and
press Escape, the game will instead bring up the 'confirm quit' menu.
For consistency, the "quit game" option on the main menu will also bring
up the 'confirm quit' menu as well, instead of immediately closing the
game.
Pressing the controller button mapped to Escape will also work as well.
The only menus that don't have return buttons are the 'countdown' menus
- so the game will not let you press Escape if there's a menu countdown
happening.
Now that pressing Escape in the 'continue' menu will just bring you back
to the 'play' menu, there's no need to specifically put
map.nexttowercolour() first when canceling the 'confirm quit' menu.
As part of my work in #535, I've noticed that 2.3 currently with 2.2
loop order doesn't have interpolated cutscene bars. This is because
cutscene bars in 2.3 get updated at the start of the frame, which
interpolates them correctly until the render functions are put in their
proper place.
There is, however, a somewhat bigger issue, outside the scope of #535,
where cutscene bars always get updated regardless of which gamemode you
are in. Previously in 2.2 and previous, cutscene bars only got updated
in GAMEMODE and TELEPORTERMODE; sometime during 2.3, the cutscene bars
timer got pulled out of all the individual game modes and moved to the
very start of the loop. (I was probably the one who did this change;
I've been caught in a trap of my own devising.)
Thus, going to MAPMODE during the cutscene bars animation doesn't keep
their position paused like it would in 2.2. This is also categorically a
more-than-visual change, since the untilbars() script command depends
on the cutscene bars timer. I see no reason for the cutscene bars to
behave differently in this way than 2.2; #535 would also end up doing
the same fix more-or-less anyway.
Since TELEPORTERMODE currently uses the same renderfixed function as
MAPMODE, I've had to add a teleporterrenderfixed() that just calls
maprenderfixed(), but also does the cutscene bars timer.
As a partial fix for #618, adding the SDL2 version number to the README
will clarify that you need a specific version of SDL2 in order to
compile (and run) the current version of the game (2.3 at the time of
writing); in the future, the SDL2 dependency will be upgraded with each
SDL release.
This is to avoid error messages that complain about missing symbols like
SDL_zeroa() (added in SDL 2.0.14) not being present at the time of
compilation.
Closes#626.
This moves the responsibility of toggling fullscreen when any of the
three toggle fullscreen keybinds are pressed (F11, Alt+Enter, Alt+F)
directly into key.Poll() itself, and not its caller (which is main() -
more specifically, fixedloop()). Furthermore, the fullscreen toggle
itself has been moved to a separate function that key.Poll() just calls,
to prevent cluttering key.Poll() with more business logic (the function
is already quite big enough as it is).
As part of my work in re-removing the 1-frame input delay in #535, I'm
moving the callsite of key.Poll() around, and I don't want to have to
lug this block of code around with it. I'd rather refactor it upfront
than touch any more lines than necessary in that PR.
This fixes a bug where the resumemusic() script command would always
play MMMMMM track 15 (or, if you're using PPPPPP, just not work). This
is because musicclass::haltdasmusik() assigns resumesong AFTER calling
Mix_HaltMusic(), but the songend() callback fires before the resumesong
assignment, meaning resumesong gets set to -1 instead of whatever
currentsong was previously.
To fix this, just move the assignment into the callback itself (I don't
know why this wasn't done before). I could have moved it to before the
Mix_HaltMusic() call, but moving it into the callback itself fixes it
for all cases of the music stopping (such as when the music fades out).
This avoids the room name awkwardly moving back up if the cursor is at
the bottom of the screen in a room with a room name, then the user
switches to a room without a room name, then moves the cursor away from
the bottom, then switches to a named room - even though the cursor was
already away from the bottom of the screen.
Conversely, if the user moves their cursor to the bottom of the screen
in an unnamed room, then switches into a named room, the room name will
already have been hidden and they won't need to wait for it to hide.
This fixes the drawer suddenly popping up only to disappear, if the user
leaves a Direct Mode room into a non-Direct Mode room when the drawer
hasn't closed all the way, and then re-enters a Direct Mode room.
Gravity line correction no longer happens on every deltaframe. This
means less CPU time is wasted. Although, there's probably no need to
correct gravity lines on every single frame... hm... well, that's an
optimization for later (there's plenty of other stuff to cache, like
minimap drawing or editor foreground drawing).
Since it only ever gets assigned from FILESYSTEM_getUserSaveDirectory(),
and that function returns a C string, and the variable is only ever read
from again, this doesn't need to be an std::string.
In #553, when Dav999 added error messages to settings menus if the game
was unable to successfully save the changed settings, he seemed to have
forgotten the PPPPPP/MMMMMM toggle option.
However, I can fully blame him for only that miss. The Flip Mode options
were using game.savemystats (which was removed in #591), so if he
searched for all instances of game.savestats()
(game.savestatsandsettings() was only added in #557), he would've missed
the game.savemystats.
Later, when I did #591, I didn't realize that I should've replaced the
ones in the Flip Mode options with game.savestatsandsettings_menu(), so
part of the blame does fall on me.
Anyways, this is fixed now.
If there was absolutely no music playing, and you went to the in-game
options to switch between MMMMMM and PPPPPP, the behavior would be a bit
glitchy.
If you started with PPPPPP, switching once to MMMMMM wouldn't play
anything, but then switching back to PPPPPP would play MMMMMM track 15.
Then switching back to MMMMMM wouldn't do anything, but then switching
back to PPPPPP again would play PPPPPP track 15 - and from there, the
behavior is stable.
If you started with MMMMMM, switching once to PPPPPP would play MMMMMM
track 15. Then switching back to MMMMMM wouldn't do anything, but then
switching back to PPPPPP would play PPPPPP track 15 - and as above, the
behavior is stable after that.
Anyways, the point is, -1 shouldn't be passed to musicclass::play()
unless you want glitchy things. And I'm not patching -1 out of
musicclass::play() itself, because passing negative numbers results in a
useful glitch (that's existed since 2.2) where you can play MMMMMM
tracks while having PPPPPP selected, effectively doubling the amount of
usable music tracks within a custom level; it also seems like the game
does -1 checks elsewhere, so I'm just being consistent with the rest of
the game (although, yes, I am technically single-case patching this).
I ran Include What You Use on the file, and a BUNCH of transitive
includes showed up.
colourTransform is used in the file, so GraphicsUtil.h needs to be
included. libc floor() is used in the file, so math.h needs to be
included (I'm removing this next...). NULL is used, so stddef.h. And
stdlib.h is used because we use rand() directly instead of going through
fRandom(). Speaking of which, we use fRandom(), so Maths.h needs to be
included, too.
So, 2.3 added recoloring one-way tiles to no longer make them be always
yellow. However, custom levels that retexture the one-way tiles might
not want them to be recolored. So, if there are ANY custom assets
mounted, then the one-ways will not be recolored. However, if the XML
has a <onewaycol_override>1</onewaycol_override> tag, then the one-way
will be recolored again anyways.
When I added one-way recoloring, I didn't intend for any custom asset to
disable the recoloring; I only did it because I couldn't find a way to
check if a specific file was customized by the custom level or not.
However, I have figured out how to do so, and so now tiles.png one-way
recolors will only be disabled if there's a custom tiles.png, and
tiles2.png one-way recolors will only be disabled if there's a custom
tiles2.png.
In order to make sure we're not calling PhysFS functions on every single
deltaframe, I've added caching variables, tiles1_mounted and
tiles2_mounted, to Graphics; these get assigned every time
reloadresources() is called.
This function will check if a specific file is a mounted per-level
custom asset, instead of being a variable that's true if ANY file is a
mounted asset.
Now you only have to call one function (and pass it a tile number) to
figure out if you should recolor a one-way tile or not, and you don't
have to copy-paste.
It's only used in FileSystemUtils and never anywhere else, especially
not Graphics. Why is this on Graphics again?
It's now a static variable inside FileSystemUtils. It has also been
renamed to assetDir for consistency with saveDir and levelDir. Also,
it's a C string now, and is no longer an STL string.
There's no need to create an std::string for every single element just
to see if it's a key name.
At least in libstdc++, there's an optimization where std::strings that
are 16 characters or less don't allocate on the heap, and instead use
the internal 16-char buffer directly in the control structure of the
std::string. However, it's not guaranteed that all the element names
we'll get will always be 16 chars or less, and in case the std::string
does end up allocating on the heap, we have no reason for it to allocate
on the heap; so we should just convert these string comparisons to C
strings instead.
This bug is technically NOT a regression - the code responsible for it
has been around since the source release.
However, it hasn't been a problem until Graphic Options and Game Options
were added to the pause screen. Since then, if you opened the pause menu
in Flip Mode, pressing up would move to the menu option below, and
pressing down would move to the menu option above. Notably, left and
right still remain the same.
This is because the map screen input code assumes that the menu options
will be flipped around - however, this has never been the case. What
happens instead is that the menu options get flipped around time when in
Flip Mode - flipping what's already flipped - so it ends up the same
again.
(Incidentally enough, the up/down reversing code is present on the title
screen, and is correct - if you happen to set graphics.flipmode to true
on the title screen, the title screen doesn't negate the flipped menu
options, so pressing up SHOULD be treated like pressing down, and vice
versa. However, in 2.3, it's not really possible to set
graphics.flipmode to true on the title screen without using GDB or
modifying the game. In 2.2 and previous, you can just complete the game
in Flip Mode, and the variable won't be reset; 2.3 cleaned up all exit
paths to the menu to make sure everything got reset.)
This isn't a problem when there's only two options, but since 2.3 adds
two more options to the pause screen, it's pretty noticeable.
Anyway, this is fixed by simply removing the branch of the
graphics.flipmode if-else in mapinput(). The 'else' branch is now the
code that gets executed unconditionally. Don't get confused by the diff;
I decided to unindent in the same commit because it's not that many
lines of code.
This fixes a "root cause" bug (that's existed since 2.2 and below) where
recreated surfaces wouldn't preserve the blend mode of their original
surface.
The surface-level (pun genuinely unintended) bug that this root bug
fixes is the one where there's no background to the room name during the
map menu animation in Flip Mode.
This is because the room name background relies on graphics.backBuffer
being filled with complete black. This is achieved by a call to
ClearSurface() - however, ClearSurface() actually fills it with
transparent black (this is not a regression; in 2.2 and previous, this
was an "inlined" FillRect(backBuffer, 0x00000000)). This would be okay,
and indeed the room name background renders fine in unflipped mode - but
it suddenly breaks in Flip Mode.
Why? Because backBuffer gets fed through FlipSurfaceVerticle(), and
FlipSurfaceVerticle() creates a temporary surface with the same
dimensions and color masks as backBuffer - it, however, does NOT create
it with the same blend mode, and kind of sort of just forgets that the
original was SDL_BLENDMODE_NONE; the new surface is SDL_BLENDMODE_BLEND.
Thus, transparency applies on the new surface, and instead of the room
name being drawn against black, it gets drawn against transparency.
Here I'm using "surface recreation" to mean allocating a new surface
with almost the exact same properties as a given previous. As you can
see, GraphicsUtil likes to recreate surfaces all the time - copying the
masks and flags (unused lol) of an existing surface - and only varies it
by the dimensions of the new surface.
As you can see, this is a lot less wordy and a lot less repetitive than
copy-pasting it a bunch.
In normal mode, the room name is at the bottom of the screen. When you
bring up the map screen, it appears as if the room name is moving up
from the bottom of the screen, and the map screen is "pushing" it up.
The effect is pretty seamless, and when I first played the game (back in
2014), I thought it was pretty cool.
However, in Flip Mode, the room name is at the top of the screen. So one
would expect the menu animation to come from above the screen. Well, no,
it still goes from the bottom of screen; ruining the effect because it
seems like there are two room names on the screen, when there ought to
be only one.
To be fair, I only noticed this while fixing another bug now, but it's
one of those things you can't unsee (I have cursed you with knowledge!);
not to mention that I probably only didn't notice this because I don't
play in Flip Mode that often (and I'd wager almost no one does; Flip
Mode previous to 2.3 seems to have been really untested, like I said
in #165). It feels like a bit of an oversight that the direction of the
animation is the same direction as in unflipped mode. So I'm fixing
this.
If you stood in two activity zones at once, you'll automatically select
the one that got created first. And when you activated it, the activity
zone prompt would switch to fading out the prompt of the OTHER activity
zone, the one you didn't activate.
This wasn't a problem in 2.2 and previous, because the fading animation
was simply bugged and defaulted to being solid black. However, in 2.3,
the fading animation is fixed, so this is possible.
Also, this really only happens in the main game. Since there's only one
type of useful activity zone in custom levels - namely the terminal
activity zone - if two activity zones did happen to overlap, activating
one of them wouldn't result in visibly fading out a different activity
zone (because they both look the same); furthermore custom level makers
are careful to not overlap terminal activity zones, lest this result in
player confusion; furthermore the placed activity zones only cover a
small area, whereas in the main game, crewmates' activity zones are
pretty big.
(Technically, you CAN create main game activity zones in custom levels,
but those are hardcoded to call main game scripts, and basically nobody
uses them.)
So what's the solution? Simply adding game.hascontrol and script.running
checks to the updating of game.activity_last[prompt|r|g|b].
Why not add those checks to the assignment of game.activeactivity, just
above? Because that would introduce a frame ordering issue (that
would NOT be (automatically) fixed by #535) where the eligibility of
pressing Enter on an activity zone now checks if you were standing in an
activity zone LAST frame, and not THIS frame. (I tested this with
libTAS.) Better to fiddle with the rendering code than fiddle with the
actual physics code.
The specific spot I used to test this was standing in Violet's activity
zone and the activity zone of the ship radio terminals (the three
terminals on the ground in her room); the ship radio terminals are
first-placed, so if you're testing this (and you should!), make that the
prompt is of the ship radio activity zone before activation.
This probably should've been moved to RenderFixed a while ago, because
it's unnecessary to run this on every single deltaframe.
The only minor wrinkle here is that this means rendering of activity
zone fades will be delayed for 1 frame, but #535 will fix that.
Since you're now allowed to bring up the map screen during cutscenes,
you've also been able to activate activity zones and teleporter prompts
during cutscenes. This only really affects custom levels; nowhere in the
main game can you overlap with an activity zone while in a cutscene.
To fix this, I've just added a script.running check to Enter keybind
processing.
I was looking through all calls to game.returnmenu(), and I noticed that
the return option in the game pad screen didn't have a
map.nexttowercolour(). I tested it and, yep, returning from there
doesn't update the background color.
So that should be fixed now.
I'm... not sure why this was here? It's absolutely not needed.
I'm guessing maybe at one point during development, there might have
been wanted a special song to be played during the credits, or no song
at all (although the function being niceplay() instead of play() seems
to support the first possibility) - but there's no need for this to be
here.
Now that recreating the same menu keeps currentmenuoption, we can remove
all these superfluous assignments. This means repeating ourselves less;
in case the option numbers change in the future, we won't have to
remember to update these reassignments, too.
When recreating the same menu, there's basically no reason to reset the
currently-selected menu option. (Also, no need to worry about indexing
out of bounds or anything - the number gets checked while iterating over
all menu options; it's never used to actually index anything. At worst
there might be a 1-frame flicker as the bounds code in gameinput() kicks
in, but that shouldn't happen anyways.)
Zip files that have been successfully mounted in editorclass::loadZips()
will now be ignored when the game does its second pass over the levels
directory. Otherwise, this would produce a superfluous error message,
because the game would attempt to parse the zip file as a level file
(when it's not a level file and is in fact a binary file).
This returns if the file given is mounted or not. 2.3 added level zip
support, so whenever the game loads level metadata, it will mount any
zip files in the levels directory; this function can be used to check if
any of those files have been mounted, and ignore them if so.
Otherwise, this would produce a superfluous warning message in the
console. Directories are now ignored and never attempted to be opened;
so now any warning messages printed out are genuine file that something
has genuinely gone wrong with.
Well, there's still a warning message printed if there's a symlink to a
directory; this is rarer, but it's still a false positive.
This function will be used to differentiate files from directories.
Or at least that was the hope. Symlink support was added in 2.3, but it
doesn't seem like PHYSFS_stat() lets you follow the symlink to check if
what it points to is itself a file or directory. And there doesn't seem
to be any function to follow the symlink yourself...
So for now, this function considers symlinks to directories to be files.
PHYSFS_readBytes() returns a PHYSFS_sint64, but we forcefully shove it
into a 32-bit signed integer.
Fixing the type of this doesn't have any immediate consequences, but
it's good for the future in case we want to use the return value for
files bigger than 2 gigabytes; it doesn't harm us in any way, and it's
just better housekeeping.
PHYSFS_fileLength() returns -1 if the file size can't be determined. I'm
going to set it to 0 instead, because it seems like that's more
well-behaved with consumers.
Take lodepng_decode24() or lodepng_decode32(), for example - from a
quick glance at the source, it only takes in a size_t (an unsigned
integer) for the filesize, and one of the first things it does is malloc
with the given filesize. If the -1 turns into SIZE_MAX and LodePNG
attempts to allocate that many bytes... well, I don't know of any
systems that have 18 exabytes of memory. So that seems pretty bad.
The function returns a PHYSFS_sint64, but we forcefully shove it into a
PHYSFS_uint32. This means we throw away all the negative numbers, which
is bad because the function returns -1 if the size of the file can't be
determined; plus, we also throw away 32 bits of information, reducing
our range of supported file sizes from 9 exabytes to 4 gigabytes.
File size support is only as good as the weakeast link, and it looks
like one of the consumers of FILESYSTEM_loadFileToMemory(),
SDL_RWFromConstMem(), only takes in a signed 32-bit integer of size;
however, I would still like to do at least the bare minimum to support
as many file sizes as we can, and changing types around is one of those
bare minimums.
I had misread this line in #629 and thought that it was just clearing
the entire surface, when really it was filling the surface with opaque
black. ClearSurface() would instead make it transparent, which would
mean when it got drawn, it would get drawn against blue, and not black.
Whoops.
These float attributes are assigned to, and then never read again. The
coordinate systems of blocks are a bit of a mess - some use xp/yp, some
use xp/yp and rect.x/rect.y - but I can confidently say that these are
never used, because it compiles fine if I remove the attributes from the
class, plus remove all assignments to it.
Screen.cpp wasn't explicitly including SDL.h, instead relying on
Screen.h to include it.
It was also relying on SDL.h to include stdio.h on Linux, which breaks
because SDL.h doesn't include stdio.h on Windows. So stdio.h is now
explicitly included as well.
stdlib.h is not used in this file.
After reasoning about it for a bit, there's no reason for these checks
to be here. `zip_normal` will either be
/home/infoteddy/.local/share/VVVVVV/levels if the asset directory is a
directory, or levels/levelname.zip if the asset directory is inside the
same zip as the level is. I don't see how they could ever be data.zip.
My guess is because of the VCE bug where it messed up its search path,
and before that bug was fixed, it had to be worked around here by
explicitly blacklisting data.zip here. When the assets mounting stuff
was ported from VCE to vanilla, vanilla didn't have the problem, and so
this data.zip blacklisting stuff was unnecessary.
Either way, I see no reason for this, so I'm going to remove it.
There is no need to use heap-allocated strings here, so I've refactored
them out. I've also cleaned up both of the functions a bit, because the
line spacing of the previous version was completely non-existent, brace
style was same-line instead of next-line, and the variable names were a
bit misleading (in FILESYSTEM_mountassets(), there is a `zippath` AND a
`zip_path`, which are two completely different variables).
Also, FILESYSTEM_mount() now prints an error message and bails if
PHYSFS_getRealDir() returns NULL, whereas it didn't do that before.
The function is literally just an alias for PHYSFS_exists(), which does
not exclusively check for directories. Plus, the function is also used
to check if a non-directory file exists. Why is this function named
"directoryExists"?!
The info message when a .data.zip file is mounted is now differentiated
from the message when an actual directory is mounted (the .data.zip
message specifies ".data.zip").
The error message for an error occurring when loading or mounting a .zip
is now capitalized.
The "Custom asset directory does not exist" now uses puts(), because
there's no need to use printf() here.
I don't know why this is here; it's unused. I don't know why the
compiler doesn't warn about this being unused either - maybe it's
secretly being used? That also means I'm not sure if the compiler is
optimizing this away or not. Anyway, this is getting removed.
The STL here cannot be completely eliminated (because the custom entity
object uses std::string), but at least we can avoid unnecessarily making
std::strings until the very end.
There's not really any reason for this function to use heap-allocated
strings. So I've refactored it to not do that.
I would've used SDL_strrstr(), if it existed. It does not appear to
exist. But that's okay.
PhysFS by default just uses system malloc(), realloc(), and free(); it
provides a way to change them, with a struct named PHYSFS_Allocator and
a function named PHYSFS_setAllocator().
According to PhysFS docs, this function should be called before
PHYSFS_init(), which is why this allocator stuff is handled in
FileSystemUtils.cpp.
Also, I've had to make two "bridge" functions, because PHYSFS_Allocator
wants pointers to functions taking in `PHYSFS_uint64`s, not `size_t`s.
ClearSurface() is less verbose than doing it the old way, and also
conveys intent clearer. Plus, some of these FillRect()s had hardcoded
width and height values, whereas ClearSurface() doesn't - meaning this
change also has better future-proofing, in case the widths and heights
of the surfaces involved change in the future.
When you pass NULL in for the SDL_Rect* parameter to SDL_FillRect(), SDL
will automatically fill the entire surface with that color. There's no
need for us to create the SDL_Rect ourselves.
This is a function that does what it says - it clears the given surface.
This just means doing a FillRect(), but it's better to use this function
because it conveys intent better.
This is pretty old commented-out code from earlier versions of the game;
they are no longer useful, and are just distracting. If we need them, we
can always refer back to this commit (but I sincerely doubt that we'll
need them).
Apparently in C, if you have `void test();`, it's completely okay to do
`test(2);`. The function will take in the argument, but just discard it
and throw it away. It's like a trash can, and a rude one at that. If you
declare it like `void test(void);`, this is prevented.
This is not a problem in C++ - doing `void test();` and `test(2);` is
guaranteed to result in a compile error (this also means that right now,
at least in all `.cpp` files, nobody is ever calling a void parameter
function with arguments and having their arguments be thrown away).
However, we may not be using C++ in the future, so I just want to lay
down the precedent that if a function takes in no arguments, you must
explicitly declare it as such.
I would've added `-Wstrict-prototypes`, but it produces an annoying
warning message saying it doesn't work in C++ mode if you're compiling
in C++ mode. So it can be added later.
One of these days, I need to get around to running Include What You Use
on this codebase. Until then, while I was working on #624, I noticed
these; I'm removing them now.
The recently released SDL 2.0.14 adds a native function for opening URIs
from the host system, superseding the OS-specific implementations of
FILESYSTEM_openDirectory.
This fixes a regression where moving platforms had no collision. Because
their width and height would be maintained, but their type would be -1.
(Also because I didn't test enough.)
In #565, I decided to set blocks' types to -1 when disabling them, to be
a bit safer in case there was some code that used block types but not
their width and heights. However, this means that when blocks get
disabled and re-created in the platform update loops, their types get
set to -1, which effectively also disables their collision.
In the end, I'll just have to compromise and remove setting blocks to
type -1. Because in a better world, we shouldn't be destroying and
creating blocks constantly just to move some platforms - however, fixing
such a fundamental problem is beyond the scope of at least 2.3 (there's
also the fact that this problem also results in some bugs that are a
part of compatibility, whether we like it or not). So I'll just remove
the -1.
next_split_s() could potentially commit out-of-bounds indexing if the
amount of source data was bigger than the destination data.
This is because the size of the source data passed in includes the null
terminator, so if 1 byte is not subtracted from it, then after it passes
through the VVV_min(), it will index 1 past the end of the passed buffer
when null-terminating it.
In contrast, the other argument of the VVV_min() does not need 1
subtracted from it, because that length does not include a null
terminator (next_split() returns the length of the substring, after all;
not the length of the substring plus 1).
(The VVV_min() here also shortens the range of values to the size of an
int, but we'll probably make size_t versions anyway; plus who really
cares about supporting massively-sized buffers bigger than 2 billion
bytes in length? That just doesn't make sense.)
If PHYSFS_enumerate() isn't successful, we now print that it wasn't
successful, and print the PhysFS error message. (We should get that
logging thing going sometime...)
Note that level dir listing still uses plenty of STL (including the end
product - the `LevelMetaData` struct - which, for the purposes of 2.3,
is okay enough (2.4 should remove STL usage entirely)); it's just that
the initial act of iterating over the levels directory no longer takes
four or SIX(!!!) heap allocations (not counting reallocations and other
heap allocations this patch does not remove), and no longer does any
data marshalling.
Like text splitting, and binary blob extra indice grabbing, the current
approach that FILESYSTEM_getLevelDirFileNames() uses is a temporary
std::vector of std::strings as a middleman to store all the filenames,
and the game iterates over that std::vector to grab each level metadata.
Except, it's even worse in this case, because PHYSFS_enumerateFiles()
ALREADY does a heap allocation. Oh, and
FILESYSTEM_getLevelDirFileNames() gets called two or three times. Yeah,
let me explain:
1. FILESYSTEM_getLevelDirFileNames() calls PHYSFS_enumerateFiles().
2. PHYSFS_enumerateFiles() allocates an array of pointers to arrays of
chars on the heap. For each filename, it will:
a. Allocate an array of chars for the filename.
b. Reallocate the array of pointers to add the pointer to the above
char array.
(In this step, it also inserts the filename in alphabetically -
without any further allocations, as far as I know - but this is a
COMPLETELY unnecessary step, because we are going to sort the list
of levels by ourselves via the metadata title in the end anyways.)
3. FILESYSTEM_getLevelDirFileNames() iterates over the PhysFS list, and
allocates an std::vector on the heap to shove the list into. Then,
for each filename, it will:
a. Allocate an std::string, initialized to "levels/".
b. Append the filename to the std::string above. This will most
likely require a re-allocation.
c. Duplicate the std::string - which requires allocating more memory
again - to put it into the std::vector.
(Compared to the PhysFS list above, the std::vector does less
reallocations; it however will still end up reallocating a certain
amount of times in the end.)
4. FILESYSTEM_getLevelDirFileNames() will free the PhysFS list.
5. Then to get the std::vector<std::string> back to the caller, we end
up having to reallocate the std::vector again - reallocating every
single std::string inside it, too - to give it back to the caller.
And to top it all off, FILESYSTEM_getLevelDirFileNames() is guaranteed
to either be called two times, or three times. This is because
editorclass::getDirectoryData() will call editorclass::loadZips(), which
will unconditionally call FILESYSTEM_getLevelDirFileNames(), then call
it AGAIN if a zip was found. Then once the function returns,
getDirectoryData() will still unconditionally call
FILESYSTEM_getLevelDirFileNames(). This smells like someone bolting
something on without regard for the whole picture of the system, but
whatever; I can clean up their mess just fine.
So, what do I do about this? Well, just like I did with text splitting
and binary blob extras, make the final for-loop - the one that does the
actual metadata parsing - more immediate.
So how do I do that? Well, PhysFS has a function named
PHYSFS_enumerate(). PHYSFS_enumerateFiles(), in fact, uses this function
internally, and is basically just a wrapper with some allocation and
alphabetization.
PHYSFS_enumerate() takes in a pointer to a function, which it will call
for every single entry that it iterates over. It also lets you pass in
another arbitrary pointer that it leaves alone, which I use to pass
through a function pointer that is the actual callback.
So to clarify, there are two callbacks - one callback is passed through
into another callback that gets passed through to PHYSFS_enumerate().
The callback that gets passed to PHYSFS_enumerate() is always the same,
but the callback that gets passed through the callback can be different
(if you look at the calling code, you can see that one caller passes
through a normal level metadata callback; the other passes through a zip
file callback).
Furthermore, I've also cleaned it up so that if editorclass::loadZips()
finds a zip file, it won't iterate over all the files in the levels
directory a third time. Instead, the level directory only gets iterated
over twice - once to check for zips, and another to load every level
plus all zips; the second time is when all the heap allocations happen.
And with that, level list loading now uses less STL templated stuff and
much less heap allocations.
Also, ed.directoryList basically has no reason to exist other than being
a temporary std::vector, so I've removed it. This further decreases
memory usage, depending on how many levels you have in your levels
folder (I know that I usually have a lot and don't really ever clean it
up, lol).
Lastly, in the callback passed to PhysFS, `builtLocation` is actually no
longer hardcoded to just the `levels` directory, since instead we now
use the `origdir` variable that PhysFS passes us. So that's good, too.
If PHYSFS_mountHandle() failed to mount a zip file, we would print
PhysFS's error message straight, without any surrounding context. This
seems a little weird, and doesn't maximize understanding for readers;
I've made it so now the error message is "Could not mount <zip file>:
<PhysFS error>".
