- If the level font is higher than 10 pixels, the third description
line (Desc3) is disabled and unavailable. CJK languages require less
characters to convey the same message (140 characters caused people
to cram tweets in all languages except CJK) and this gives us enough
room in the levels list without having to cram the metadata even more
than it already was or showing less levels per page.
- The "Untitled Level" and "by Unknown" now selectively show up in the
interface font instead of the level font.
None of the structs in the new font system ended up being "publicly"
accessible, they were all treated as implementation details for
Font.cpp to use, so these structs are now fully defined in Font.cpp
only.
The last two deprecated functions are:
- Graphics::Print
- Graphics::PrintWrap
These are used a lot, but they're relatively easy to replace, since the
only flag I probably have to immediately worry about is PR_CEN. I do
often need to add PR_FONT_* flags but I don't need to add any
PR_2X/PR_3X/PR_4X anymore.
Only three deprecated functions remain:
- Graphics::Print
- Graphics::PrintWrap
- Graphics::bigprint
I also fixed multiline transparent textboxes having their outlines
overlap the text itself, and fixed textboxclass::padtowidth assuming
glyph widths of 8 (it made the hints at the start of intermission 1
run offscreen for example)
Only four deprecated functions remain:
- Graphics::Print
- Graphics::PrintWrap
- Graphics::bigprint
- Graphics::bprint
Graphics::bprint is the least-used one of them, and after that, the
other functions are used a LOT, but it'll be a lot faster to go through
them, since I have less and less flags to worry about. I'll probably
start using Vim macros again like I did for loc::gettext()ing strings,
or maybe I'll automate this completely.
I migrated all of them to font::print, so they can now be removed.
Six deprecated print functions left! (Of which some are used a whole
lot, it's simpler if the lesser-used ones are gone first.)
This used some constants counting numbers of characters
(LEN_INTERIM_COMMIT and LEN_BRANCH_NAME) and even an SDL_arraysize,
all multiplied by 8, to get the length of the displayed text.
Now it just uses the new PR_RIGHT flag of font::print.
I did also force the 8x8 font for all the interim information, since
the date kinda overlapped with the menu options... And all of these
lines only show up in interim versions anyway, except for the version
number - which is left in the interface font for consistency with the
rest of the menu in non-interim versions. The inconsistency in interim
versions doesn't really matter all that much I think, it's just some
technical/debug info.
I migrated all graphics.len calls over to font::len (and also migrated
prints mainly surrounding those graphics.len's) so the old len function
is now completely removed.
I especially focused on graphics.len and the print calls around them,
because graphics.len calls appear a bit less often, might be overlooked
when migrating print calls (thus possibly using different fonts by
accident) and are often used for some kind of right-alignment or
centering which can be changed into PR_RIGHT or PR_CEN with a different
X anyway.
Notably, I also added a new function to generate these kinds of
sliders: ....[]............
Different languages means that the slider for analogue stick
sensitivity needs to be longer to fit possibly long words for
Low/Medium/High, and then different font sizes means that the longer
slider won't fit onscreen in a language that needs a 12-wide font. So
slider_get() can take a "target width", which dynamically changes the
number of characters depending on the width of them in the interface
font.
I kinda forgot that I could force the 8x8 font instead of adapting the
characters in the slider to the font, and other ideas (like using
different characters or a more graphical progress bar) have been
brought up on Discord, so this might all change again sooner or later.
If you for example have your VVVVVV set to English, have the option for
Chinese selected, and then the window loses focus, the English pause
screen would show up in the Chinese font. This is now fixed.
meta.xml can now have a <font> tag, which gives the name of the font
that the language needs. This will directly control the interface font
when the language is active, and will soon also control the font used
for each option on the language screen.
Also added some borders to more of the text in room name translator
mode, fixed a positioning issue if the interface font is not 8x8, and
migrated the trophy texts to font::print_wrap (including
PR_COLORGLYPH_BRI that still needed to be done)
Activity zones need to be in the interface font if the message is from
the system (like Press ENTER to activate terminal, which may be in a
different language) and in the level font if it's a customized message
(setactivitytext).
Graphics::drawtextbox was counting the textbox width and height in
8x8 characters, even including the borders as characters, so it'd need
to be told what the font for the textbox is, and then probably only the
height needs to be adapted to the font and not the width because that's
adapted to the screen width... So just call Graphics::drawpixeltextbox
directly instead. It was already weird enough how actual cutscene
textboxes called Graphics::drawtextbox with x/8, y/8 before the
previous commit, (when you already have the pixel width and height!)
only to have that be a wrapper for drawpixeltextbox by doing x*8, y*8.
Some textboxes need to be in the level font (like room names, cutscene
dialogue, etc - even in the main game), and some need to be in the
interface font (like when you collect a shiny trinket or crewmate). So
most of these textboxes now have graphics.textboxprintflags(font_flag)
as appropriate.
RoomnameTranslator.cpp is now also migrated to the new print system -
in room name translator mode, the room name is now displayed in the 8x8
font if it's untranslated and the level font if it is.
Level text such as room names, text box content, and the contents of
the script editor need to be displayed in the level-specific font, and
tweaked to look right. This involves displaying less lines in the
script editor, making text boxes bigger, displaying some text higher
and some text lower. This is still unfinished, but it's the real start
of a migration to font::print functions!
find_font_by_name() just finds the index of a given font name. This
index is supposed to be stored and reused, because the font (for a
language/level) won't be changed very often. So this function would
only run when getting the language metadata, when loading a level, etc.
All global fonts and all custom fonts in a level are now loaded, and
added to their respective "vectors". The selected font is still always
as the global font.png, and the custom level font also isn't selected
yet, but it's now easier to implement that.
Also, I added FILESYSTEM_enumerateAssets, which #902 already has but I
needed it now. I also rewrote it to not use std::vector<std::string>.
That was my idea, it's also how FILESYSTEM_getLanguageCodes worked,
so for symmetry, that function is getting changed as well.
The font::len function now handles the printing scale, so it can
immediately return the scaled length instead of having the caller
calculate it. The print function now handles CJK low/high flags and
vertically centers CJK text by default (instead of letting it stick
out on the bottom).
The following functions were moved directly:
- next_wrap
- next_wrap_s
- string_wordwrap
- string_wordwrap_balanced
- string_unwordwrap
These ones will probably still need get a flags argument, except for
string_unwordwrap (since they need to know what font we're talking
about.
The implementation of graphics.len has also been moved to Font.cpp,
but graphics.len still exists for now and is deprecated.
graphics.PrintWrap is now also deprecated. An advantage of the new
version (with flags) is that it'll be possible to do things like put
a border around wrapped text, wrap text at larger scales, etc, but
these things don't work perfectly yet.
This commit also has some other fixes, like the default advance of
6 pixels for characters 0x00-0x1F in 8x8 fonts.
There has always been a mess of different print functions that all had
slightly different specifics and called each other:
Print(x, y, text, r, g, b, cen)
nothing special here, just does what the arguments say
PrintAlpha(x, y, text, r, g, b, a, cen)
just Print but with an alpha argument
PrintWrap(x, y, text, r, g, b, cen, linespacing, maxwidth)
added for wordwrapping, heavily used now
bprint(x, y, text, r, g, b, cen)
prints an outline, then just PrintAlpha
bprintalpha(x, y, text, r, g, b, a, cen)
just bprint but with an alpha argument
bigprint(x, y, text, r, g, b, cen, sc)
nothing special here, just does what the arguments say
bigbprint(x, y, text, r, g, b, cen, sc)
prints an outline, then just bigprint
bigrprint(x, y, text, r, g, b, cen, sc)
right-aligns text, unless cen is given in which case it just
centers text like other functions already do?
bigbrprint(x, y, text, r, g, b, cen, sc)
prints an outline, then just bigrprint
We need even more specifics with the new font system: we need to be
able to specify whether CJK characters should be vertically centered or
stick out on the top/bottom, and we sometimes need to pass in
brightness variables for colored glyphs. And text printing functions
now fit better in Font.cpp anyway. So there's now a big overhaul of
print functions: all these functions will be replaced by font::print
and font::print_wrap (the former of which now exists). These take flags
as their first argument, which can be 0 for a basic left-aligned print,
PR_CEN for centered text (set X to -1!!!) PR_BOR for a border (instead
of functions like bprint and bigbprint), PR_2X, PR_3X etc for scaling,
and these can be combined with |.
Some text, for example [Press ESC to return to editor], fades in/out
using the alpha value, which is passed to the print function. In some
other places (like Press ENTER to teleport, textboxes, trophy text...)
text can fade in or out by direct changes to the RGB values. This means
regular color-adjusted white text can change color, but colored button
glyphs can't, since there's no way to know in the print system what the
maximum RGB values of a specific textbox are supposed to be, so the
only thing it can do is draw the button glyphs at full brightness,
which looks bad. Therefore, you can now also pass in the brightness
value via the flags, with PR_COLORGLYPH_BRI(255).
Since there's now a new XML-based font metadata file format to obsolete
the .txt file with all the glyphs, this commit switches the built-in
font to that new format.
This is still a work in progress, but the existing font system has been
removed and replaced by a new one, in Font.cpp.
Design goals of the new font system include supporting colored button
glyphs, different fonts for different languages, and larger fonts than
8x8 for Chinese, Japanese and Korean, while being able to support their
30000+ characters without hiccups, slowdowns or high memory usage. And
to have more flexibility with fonts in general. Plus, Graphics.cpp was
long enough as-is, so it's good to have a dedicated file for font
storage.
The old font system worked with a std::vector<SDL_Surface*> to store
8x8 surfaces for each character, and a std::map<int,int> to store
mappings between codepoints and vector indexes.
The new system has a per-font collection of pages for every block of
0x1000 (4096) codepoints, that may be allocated as needed. A glyph on
a page contains the index of the glyph in the image (giving its
coordinates), the advance (how much the cursor should advance, so the
width of that glyph) and some flags which would be at least whether the
glyph exists and whether it is colored.
Most of the *new* features aren't implemented yet; it's currently
hardcoded to the regular 8x8 font.png, but it should be functionally
equivalent to the previous behavior. The only thing that doesn't really
work yet is level-specific font.png, but that'll be supported again
soon enough.
This commit also adds fontmeta (xml) support.
Since the fonts folder is mounted at graphics/, there are two main
options for recognizing non-font.png fonts: the font files have to be
prefixed with font (or font_) or some special file extension is
involved to signal what files are fonts. I always had a font.xml in
mind (so font_cn.xml, font_ja.xml, etc) but if there's ever gonna be
a need for further xml files inside the graphics folder, we have a
problem. So I named them .fontmeta instead.
A .fontmeta file looks somewhat like this:
<?xml version="1.0" encoding="UTF-8"?>
<font_metadata>
<width>12</width>
<height>12</height>
<white_teeth>1</white_teeth>
<chars>
<range start="0x20" end="0x7E"/>
<range start="0x80" end="0x80"/>
<range start="0xA0" end="0xDF"/>
<range start="0x250" end="0x2A8"/>
<range start="0x2AD" end="0x2AD"/>
<range start="0x2C7" end="0x2C7"/>
<range start="0x2C9" end="0x2CB"/>
...
</chars>
<special>
<range start="0x00" end="0x1F" advance="6"/>
<range start="0x61" end="0x66" color="1"/>
<range start="0x63" end="0x63" color="0"/>
</special>
</font_metadata>
The <chars> tag can be used to specify characters instead of in a .txt.
The original idea was to just always use the existing .txt system for
specifying the font charset, and only use the XML for the other stuff
that the .txt doesn't cover. However, it's probably better to keep it
simple if possible - having to only have a .png and a .fontmeta seems
simpler than having the data spread out over three files. And a major
advantage: Chinese fonts can have about 30000 characters! It's more
efficient to be able to have a tag saying "now there's 20902 characters
starting at U+4E00" than to include them all in a text file and having
to UTF-8 decode every single one of them.
If a font.txt exists, it takes priority over the <chars> tag, and in
that case, there's no reason to include the <chars> tag in the XML.
But font.txt has to be in the same directory as font.png, otherwise it
is rejected. Same for font.fontmeta. If neither font.txt nor <chars>
exist, then the font is seen as a 2.2-and-below-style ASCII font.
In <special>: advance is the number of pixels the cursor advances after
drawing the character (so the width of the character, without affecting
the grid in the source image), color is whether the character should
have its original colors retained when printed (for button glyphs).
As for <white_teeth>:
The renderer PR has replaced draw-time whitening of sprites/etc
(using BlitSurfaceColoured) by load-time whitening of entire images
(using LoadImage with TEX_WHITE as an argument).
This means we have a problem: fonts have always had their glyphs
whitened at printing time, and since I'm adding support for colored
button glyphs, I changed it so glyphs would sometimes not be whitened.
But if we can't whiten at print time, then we'd need to whiten at load
time, and if we whiten the entire font, any colored glyphs will get
destroyed too. If you whiten the image selectively, well, we need more
code to target specific squares in the image, and it's kind of a waste
when you need to whiten 30000 12x12 Chinese characters when you're only
going to need a handful, but you don't know which ones.
The solution: Whitening fonts is useless if all the non-colored glyphs
are already white, so we don't need to do it anyway! However, any
existing fonts that have non-white glyphs (and I know of at least one
level like that) will still need to be whitened. So there is now a
font property <white_teeth> that can be specified in the fontmeta,
which indicates that the font is already pre-whitened. If not
specified, traditional whitening behavior will be used, and the font
cannot use colored glyphs.
The MAKEANDPLAY, NO_CUSTOM_LEVELS, and NO_EDITOR defines remove content
or features. However, they then raise several warnings because of some
cases, functions, or variables that end up not being used.
This silences them by using the UNUSED macro, or by adding a default
catch-all case if the define is defined (so unhandled cases will still
raise warnings in a build that doesn't have these defines).
We get these warnings because of the typedefs for 64-bit integers in
PhysFS's header files. The compiler will treat them as extensions and
will still compile it fine but it does mean we aren't strictly standards
conforming. Which really isn't a problem anyway. Probably.
This adds the build type in brackets in `-version` output after e.g.
"VVVVVV v2.4". The build type is MAKEANDPLAY, NO_CUSTOM_LEVELS, or
NO_EDITOR (which are not necessarily mutually exclusive).
This is appended on to the end of the first line so as to not break
Ved's existing `-version` check which only checks if the beginning of
STDOUT is "VVVVVV" followed by any version number.
This makes it so that whenever the game loads a script as directed by a
script command, it will first try to load the script from the processed
argument, and if that fails only then will it try to load the script
from the raw argument.
This fixes a regression reported by Dav999 in the custom level "Vungeon"
created by Dynaboom, where a script `ifflag`s to `aselectP1.1` even
though the actual script name is `aselectp1.1`. In 2.3, it would
lowercase `aselectP1.1` and load the script properly, but previous to
this commit it would try to load the script with a capital name and then
fail.
This aborts and prints the error from SDL_GetError() if
SDL_CreateWindow() or SDL_CreateRenderer() fails.
We abort because there's not much point in continuing if the window or
renderer can't be created. There might be a use case for running the
game in headless mode, but let's code that in explicitly if we ever want
it.
This sets the minimum window size (to 320 x 240), so that the window
cannot be resized to lower than that.
This is because there's no utility in having a game window smaller than
that, and it provides a bonus convenience of being able to resize the
game to exactly 320x240 without needing to be exactly precise about it.
This idea was suggested by Dav999.
The `point` struct was a relic of ActionScript and was added because of
the Flash 'point' object. However, it seems like Simon Roth didn't
realize that SDL has its own point struct.
With this, `Maths.h` can be un-included from a couple headers, which
exposes the fact that `preloader.cpp` was relying on `Maths.h` being
transitively included from `Graphics.h`.
Dav999 added `#include "Localization.h"` before `#include "KeyPoll.h"`,
when it should go after instead, because the letter L comes after the
letter K in the English alphabet.
Ever since VVVVVV was initially ported to C++ in 2.0, it has used surfaces from SDL. The downside is, that's all software rendering. This commit moves most things off of surfaces, and all into GPU, by using textures and SDL_Renderer.
Pixel-perfect collision has been kept by keeping a copy of sprites as surfaces. There's plans for pixel-perfect collision to use masks instead of reading pixel data directly, but that's out of scope for this commit.
- `graphics.reloadresources()` is now called later in `main`, because textures cannot be created without a renderer.
- This commit also removes a bunch of surface functions which are no longer needed.
- This also recaches target textures in certain places for d3d9.
- graphics.images was converted to a fixed-size array.
- fillbox and fillboxabs use SDL_RenderDrawRect instead of drawing an outline using four filled rectangles
- Update my name in the credits
The pixel border around the map fits to map size normally. However, when
the map is off, it's always the dimensions of the full size map, and the
border didn't reflect that, so if the custom minimap was off, and the
map wasn't the full size, it wouldn't fit correctly.
This bug was introduced in PR #898.
The branch name will be added to the window title if it is an interim
version, e.g. "VVVVVV [master]".
This makes it easier for developers to tell at a glance which build of
the game they're running.
While the window is initialized with 640x480, the screen settings
defaulted to 320x240, which is a tiny window. The screen settings take
priority over the initialized window, so people with no previous
settings file will get 320x240. This makes it so they get 640x480
instead.
The window is still initialized to 640x480 (constants used for clarity)
just in case there's some weirdness if it's initialized to a potentially
odd resolution from the user's settings file.
This is useful for developers who may have multiple builds of the game
from various different branches and may easily forget which build of the
game is what.
This shows up in the bottom-right corner of the title screen and also
with the `-version` command-line option, and in the status message
printed when building the game.
Unfortunately there needs to be an intermediate surface for proper alpha
color blending to happen via SDL_BlitSurface. The exact SDL blending
logic seems complicated and unclear for me to implement at the moment,
and my attempts kind of failed, so this is just a stopgap measure to at
least get the game rendering how it was before I screwed it up.
This refactors them to not allocate a temporary surface by instead
simply drawing directly to the destination surface.
This means re-implementing the original semantics of SDL_BlitSurface in
them, which is the function signature they (and BlitSurfaceStandard)
were based off of. So now if src_rect or dest_rect are NULL, it
automatically uses a rect of the entirety of the corresponding surface,
and other things like that. And also some other optimizations like
no-opping if the alpha is 0 (because then nothing will be drawn), and
critical checks (not drawing if the destination pixel is out of bounds,
because then otherwise it would wrap around, or at least that's what it
did when I tested it).
This resulted in a bunch of code that would really suck to copy-paste
because then you'd have to remember to update the other copy, so I
refactored them further and put the common code into one function, while
separating the different code (the exact transformation they do) into
different functions that get passed in through function pointers.
In general, "temp" is a bad name because it could mean anything. In this
case the buffer isn't really temporary and it's only used for drawing
the menu with a certain offset, so I made it use a better name. But also
because I'm going to be adding temporary buffers so I don't want the
names to be confused.
Honestly not too sure why we ever wrote the mask handling logic
ourselves instead of using SDL functions. Hell, we even used SDL_MapRGB
for Graphics::getRGB before.
`ct` was used to be a variable that a color was temporarily stored in
before being passed to a draw function. But this is unnecessary and you
might as well just have a temporary of the color directly. I guess this
was the practice used because temporaries were apparently really bad in
Flash.
setcolreal() was added in 2.3 to do basically the same thing (set it
directly from entities' realcol attributes). But it's no longer needed.
Correspondingly, Graphics::setcol has been renamed to Graphics::getcol
and now returns an SDL_Color, and Graphics::huetilesetcol has been
renamed to Graphics::huetilegetcol for the same reason.
Some functions (notably Graphics::drawimagecol and
Graphics::drawhuetile) were relying on the `ct` to be implicitly set and
weren't ever having it passed in directly. They have been corrected
accordingly.
colourTransform is a struct with only one member, a Uint32. The issue
with `Uint32`s is that it requires a bunch of bit shifting logic to edit
the colors. The issue with bit shifting logic is that people have a
tendency to hardcode the shift amounts instead of using the shift amount
variables of the SDL_PixelFormat, which makes it annoying to change the
color masks of surfaces.
This commit fixes both issues by unhardcoding the bit shift amounts in
DrawPixel and ReadPixel, and by axing the `Uint32`s in favor of using
SDL_Color.
According to the SDL_PixelFormat documentation (
https://wiki.libsdl.org/SDL2/SDL_PixelFormat ), the logic to read and
draw to pixels from colors below 32-bit was just wrong. Specifically,
for 8-bit, there's a color palette used instead of some intrinsic color
information stored in the pixel itself. But we shouldn't need that logic
anyways because we don't use colors below 32-bit. So I axed that too.
This makes it so temporary variables have their scopes reduced (if
possible). I also didn't hesitate to fix style issues, such as their
names ("temp" is such a bad name), making them const if possible, and
any code it touched too.
It previously duplicated the for-loop twice, once for tiles.png and
tiles2.png, which just made me sad. Now it doesn't do that.
Also it previously had an alternate tileset == 10 condition for
tiles.png, which didn't seem to do anything because there's no such
thing as tileset 10, and anyways it's useless in-game because when
playing in the actual game it won't draw tiles.png, so I removed it. I
don't know why it was there in the first place.
Since I removed the temp variable from the outer scope, the other usage
of it has to be updated.
For some reason they all have their executable bits set. Presumably this
is because they were made on an NTFS system where every file is
executable (which doesn't sound secure at all but that's another story).
This allows translators to test all text boxes in the scripts. It
doesn't run the scripts themselves - it only shows the basic appearance
of each text box individually, so context may be lost but it's good to
have a way to see any text boxes that might otherwise not be easily
seen because they require specific circumstances to appear.
Did another complete proofread of all the non-roomnames (hadn't looked
through *everything* in a while), and it's just three little things
that I felt would be important enough to tweak.
The strings "Vitellary"/"Vermilion"/"Verdigris"/"Victoria" now have two
cases to support changing them for the intermission replay menu options
(like "with Vitellary").
Also, the string "< and > keys change tool" is now "{button1} and
{button2} keys change tool", so it can be changed dynamically without
having to retranslate the string.
I wanted to not complicate the system with different string cases (like
cgettext) if possible, and I have been able to keep the main strings a
simple English=Translation mapping thus far, but apparently strings
like "Rescued!" (which are one string in English), have to be
translated for the correct gender in some languages. So this was a good
time to add support for string cases anyway.
It's a number that can be given to a string to specify the specific
case it's used, to disambiguate identical English keys. In the case of
"Rescued!" and "Missing...", male versions of the string are case 1,
female versions are case 2, and Viridian being missing is case 3. Of
course, if a language doesn't need to use different variants, it can
simply fill in the same string for the different cases.
If any other string needs to switch to different cases: distinguish
them in the English strings.xml with the case="N" attribute (N=1 and
higher), sync language files from the translator menu (existing
translations for the uncased string will simply be copied to all cases)
and change loc::gettext("...") to loc::gettext_case("...", 1),
loc::gettext_case("...", 2), etc.
With a single README.txt for both translators and maintainers, both
have to read through info that's not relevant for them, because
translators don't need to worry about the specifics of adding new
English strings and recompiling the game, and programmers don't need to
worry about the specifics of how to translate things. Now it's split
into README-translators.txt and README-programmers.txt.
I would, of course, recommend translators to translate the roomnames
while playing the full game (optionally in invincibility) so they can
immediately get all the context and maybe the most inspiration. And if
you want to go back into a specific level, then there's always the time
trials and intermission replays which will give you full coverage of
all the room names.
However, the time trials weren't really made for room name translation.
They have some annoying features like the instant restart when you
press ENTER at the wrong time, they remove context clues like
teleporters and companions, but the worst problem is that the last room
in a level is often completely untranslatable inside the time trials
because you immediately get sent to the results screen...
So, I added a new menu in the translator options, "explore game", which
gives you access to all the time trials and the two intermissions, from
the same menu. All these time trials (which they're still based off of,
under the hood) are stripped of the annoying features that come with
time trials. These are the changes I made to time trial behavior in
translator exploring mode:
- No 3-2-1-Go! countdown
- No on-screen time/death/shiny/par
- ENTER doesn't restart, and the map menu works. The entire map is also
revealed.
- Prize for the Reckless is in its normal form
- The teleporters in Entanglement Generator, Wheeler's Wormhole and
Level Complete are restored as context for room names (actually, we
should probably restore them in time trials anyway? Their "press to
teleport" prompt is already blocked out in time trials and they do
nothing other than being a checkpoint. I guess the reason they were
removed was to stop people from opening the teleporter menu when that
was not specifically blocked out in time trials yet.)
- The companions are there at the end of levels, and behave like in no
death mode (become happy and follow you to the teleporter). Also for
context.
- At the end of each level, you're not suddenly sent to the menu, but
you can use the teleporter at your leisure just like in the
intermission replays. In the Final Level, you do get sent to the menu
automatically, but after a longer delay.
I made another mark on VVVVVV: don't be startled, I added gamestates.
I wanted all teleporters at the end of levels to behave like the ones
at the end of the intermission replays, and all handling for
teleporting with specific companions is already done in gamestates, so
rather than adding conditional blocks across 5 or so different
gamestates, it made more sense to make a single gamestate for
"teleporting in translator exploring mode" (3090). I also added an
alternative to having to use gamestate 3500 or 82 for the end of the
final level: 3091-3092.
One other thing I want to add to the "explore game" menu: a per-level
count of how many room names are left to translate. That shouldn't be
too difficult, and I'm planning that for the next commit.
This is a single block of code so it was easy to split from the
foundation commit.
This commit is part of rewritten history of the localization branch.
The original (unsquashed) commit history can be found here:
https://github.com/Dav999-v/VVVVVV/tree/localization-orig
This involves loc::gettext_roomname and loc::gettext_roomname_special.
This commit is part of rewritten history of the localization branch.
The original (unsquashed) commit history can be found here:
https://github.com/Dav999-v/VVVVVV/tree/localization-orig
This mainly adds loc::gettext calls and replaces SDL_snprintf by
VFormat for the percentage.
This commit is part of rewritten history of the localization branch.
The original (unsquashed) commit history can be found here:
https://github.com/Dav999-v/VVVVVV/tree/localization-orig
This replaces SDL_snprintf by VFormat for the time strings, and makes
number_words get translated numbers.
This commit is part of rewritten history of the localization branch.
The original (unsquashed) commit history can be found here:
https://github.com/Dav999-v/VVVVVV/tree/localization-orig
This mainly adds loc::gettext calls for all the menu titles and
explanations. It also redesigns the time trial screen.
This commit is part of rewritten history of the localization branch.
The original (unsquashed) commit history can be found here:
https://github.com/Dav999-v/VVVVVV/tree/localization-orig
This mainly adds loc::gettext calls for menu option labels.
This commit is part of rewritten history of the localization branch.
The original (unsquashed) commit history can be found here:
https://github.com/Dav999-v/VVVVVV/tree/localization-orig
setLevelDirError was changed from snprintf-style to VFormat, but it's
only used in that file so...
This commit is part of rewritten history of the localization branch.
The original (unsquashed) commit history can be found here:
https://github.com/Dav999-v/VVVVVV/tree/localization-orig
This adds loc::gettext for all "Press {button} to explode" and friends,
and also changes the interact_prompt function in Render.cpp to expect
{button} instead of %s.
This commit is part of rewritten history of the localization branch.
The original (unsquashed) commit history can be found here:
https://github.com/Dav999-v/VVVVVV/tree/localization-orig
The affected functions are:
- editormenuactionpress
- editorinput
- editorclass::switch_tileset
- editorclass::switch_tilecol
- editorclass::switch_enemy
- editorclass::switch_warpdir
This mainly adds loc::gettext calls.
This commit is part of rewritten history of the localization branch.
The original (unsquashed) commit history can be found here:
https://github.com/Dav999-v/VVVVVV/tree/localization-orig
This commit adds most of the code changes necessary for making the game
translatable, but does not yet "unhardcode" nearly all of the strings
(except in a few cases where it was hard to separate added
loc::gettexts from foundational code changes, or all the localization-
related menus which were also added by this commit.)
This commit is part of rewritten history of the localization branch.
The original (unsquashed) commit history can be found here:
https://github.com/Dav999-v/VVVVVV/tree/localization-orig
This is needed for the limits check in the translator menu.
This commit is part of rewritten history of the localization branch.
The original (unsquashed) commit history can be found here:
https://github.com/Dav999-v/VVVVVV/tree/localization-orig
This just adds booleans roomname_special to the level classes in
preparation for the localization system to use them.
This commit is part of rewritten history of the localization branch.
The original (unsquashed) commit history can be found here:
https://github.com/Dav999-v/VVVVVV/tree/localization-orig
A relevant paragraph copied from the original commit history:
The idea is that we store all strings somewhere managed, and then the
hashmap only needs pointers to those strings. For storing strings, I
created a `Textbook` structure, which consists of one or more 50 KB
"pages" (allocated as needed) on which you can simply write strings in
both languages back-to-back with `textbook_store(textbook, text)` and
get pointers to each of them. (I was originally going to just use one
big buffer and realloc to double the size when filled up, but then the
hashmap would be full of dangling pointers...) When needed, like when
switching to a different language, an entire textbook can be freed at
once.
This commit is part of rewritten history of the localization branch.
The original (unsquashed) commit history can be found here:
https://github.com/Dav999-v/VVVVVV/tree/localization-orig
This has a lot of characters that different languages need.
This commit is part of rewritten history of the localization branch.
The original (unsquashed) commit history can be found here:
https://github.com/Dav999-v/VVVVVV/tree/localization-orig
I think this is because if you both check that __has_builtin is defined
and use it in the same 'if' preprocessor statement, it can error because
there's no equivalent to short-circuiting in preprocessor statements.
_SDL_HAS_BUILTIN should be safer.
This creates the game over screen for dying in No Death Mode. It's three
lines long and it's only called once. There's no reason it has to be a
separate function. From the name it sounds like it was meant to be a
generic function but it's anything but that. So just inline it in to
where it's called.
This fixes a bug where players could flip in mid-air at the start of
custom levels whose start points were in mid-air, because
onground/onroof were not being reset. This could also be done when
loading in to a save with a checkpoint in mid-air. All that's required
is to exit the game while standing on a surface (or otherwise having a
nonzero onground/onroof).
This reminded me that there were other variables on the player entity
persisting through that made loading in to a level not have a totally
clean slate, such as walkingframe (which could affect sequencing
individual TASes together into one TAS), so it's better to just destroy
the player entity and recreate it.
Except some attributes still have to be persisted for 2.2 and 2.0
glitchrunner mode. But it's better that this is done via a whitelist
rather than a blacklist.
The player duplicate removal code in hardreset is mostly redundant now
(except for some very unlikely corner cases), but there's nothing wrong
with having redundant code as long as it's not harmful. I had a
paragraph here justifying why it could be removed but decided it was
simpler to just keep it.
This print is useful to know if an achievement (one that's not already
unlocked) would actually be unlocked in an end user environment, while
running the game in a dev environment.
Also fixed up the style of the function because it was definitely
inconsistent with the surrounding code.
This overhauls scriptclass::gamemode massively.
The first change is that it now uses an enum, and enforces using that
enum via using its type instead of an int. This is because whenever
you're reading any calls to startgamemode, you have no idea what magic
number actually corresponds to what unless you read startgamemode
itself. And when you do read it, not every case is commented adequately,
so you'd have to do more work to figure out what each case is. With the
enum, it's obvious and self-evident, and that also removes the need for
all the comments in the function too. Some math is still done on mode
variables (to simplify time trial code), but it's okay, we can just cast
between int and the enum as needed.
The second is that common code is now de-duplicated. There was a lot of
code that every case does, such as calling hardreset, setting Flip Mode,
resetting the player, calling gotoroom and so on.
Now some code may be duplicated between cases, so I've tried to group up
similar cases where possible (most notable example is grouping up the
main game and No Death Mode cases together). But some code still might
be duplicated in the end. Which is okay - I could've tried to
de-duplicate it further but that just results in logic relevant to a
specific case that's located far from the actual case itself. It's much
better to leave things like setting fademode or loading scripts in the
case itself.
This also fixes a bug since 2.3 where playing No Death Mode (and never
opening and closing the options menu) and beating it would also give you
the Flip Mode trophy, since turning on the flag to invalidate Flip Mode
in startgamemode only happened for the main game cases and in previous
versions the game relied upon this flag being set when using a
teleporter for some reason (which I removed in 2.3). Now instead of
specifying it per case, I just do a !map.custommode check instead so it
covers every single case at once.
While refactoring scriptclass::startgamemode, I noticed that these
variables weren't being reset. Fortunately, this doesn't seem to have
affected anything because they get overwritten one way or another in
startgamemode. But it's good just to be defensive and reset them anyway.
They are not reset in 2.2 or 2.0 glitchrunner mode because dying during
exiting to the menu is needed for credits warp, and that means the
checkpoint position needs to be maintained through.
This is to indicate when a code path is absolutely, for certain, 100%
unreachable. Useful as the default case inside a case-switch that is for
sure 100% exhaustive because it's inside the case of another case-switch
(and the default case is there to suppress compiler warnings about the
case-switch not being exhaustive), which is a situation coming up in my
scriptclass::startgamemode refactor.
It does this by deliberately invoking undefined behavior, either using a
compiler builtin that does the same thing or being a noreturn function
that returns. (And undefined behavior is not undefined behavior if it is
not executed in a code path, otherwise all NULL checks would be useless
because it'd dereference something that could be NULL in another code
path.)
I have no idea why they were floats in the first place. They are
coordinates, and coordinates are integer positions in this game. They
get converted to float only to be explicitly `static_cast`ed back to
ints in `testwallsy`.
This variable passes along the rule of the entity, which is an int. No
idea why it was converted to a float. Thankfully this is only used for
an unused block type, so it doesn't really matter.
This makes it so room names are no longer pointers to someone else's
memory, and instead to set them you use `mapclass::setroomname`. If the
string is short enough to fit in a static, no-alloc buffer, then it gets
copied there. Otherwise, a new heap allocation is made that duplicates
the string, and the new pointer is used instead.
This makes it possible for room names to contain arbitrary data whose
origin is temporary (e.g. from a script command that could be added in
the future).
This replaces all calls to SDL_free with a new macro, VVV_free, that
nulls the pointer afterwards. This mitigates any use-after-frees and
also completely eliminates double-frees. The same is done for any
function to free specific objects such as SDL_FreeSurface, with the
VVV_freefunc macro.
No exceptions for any of these calls, even if the pointer is discarded
or zeroed afterwards anyway. Better safe than sorry.
This is a macro rather than a function that takes in a
pointer-to-pointer because such a function would have type issues that
require casting and that's just not safe.
Even though SDL_free and other SDL functions already check for NULL, the
macro has a NULL check for other functions that don't. For example,
FAudioVoice_DestroyVoice does not check for NULL.
FILESYSTEM_freeMemory has been axed in favor of VVV_free because it
functionally does the same thing except for `unsigned char*` only.
Trinket and teleporter legends would be drawn even if they were out of
bounds. Trinket legends in particular were easy to do because you can
just place a trinket in a custom level and resize the map to not include
the room of the trinket.
Now, there are checks added so they won't be added if they are out of
bounds. This is in line with the fact that, since 2.3, if a trinket
exists outside of the map in custom levels, it won't count towards the
number of trinkets.
It's becoming pretty clear that the size of the map is important enough
to be queried a lot, but each time it's something like `map.custommode ?
map.customwidth : 20` and `map.custommode ? map.customheight : 20` which
is not ideal because of copy-pasting.
Furthermore, even `map.customwidth` and `map.customheight` are just
duplicates of `cl.mapwidth` and `cl.mapheight`, which are only set in
`customlevelclass::generatecustomminimap`. This is a bit annoying if you
want to, say, add checks that depend on the width and height of the
custom map in `mapclass::initcustommapdata`, but `map.customwidth` and
`map.customheight` are out of date because `generatecustomminimap`
hasn't been called yet. And doing the ternary there requires a `#ifndef
NO_CUSTOM_LEVELS` to reference `cl.mapwidth` and `cl.mapheight` which is
just awful.
So I'm axing `map.customwidth` and `map.customheight`, and I'm axing all
the ternaries that are duplicating the source of truth in
`MapRenderData`. Instead, there will just be one function to call for
the width and height, `mapclass::getwidth` and `mapclass::getheight`,
and everyone can simply call those without needing to do ternaries or
duplication.
The existing code was allergic to putting spaces between tokens, and had
some minor code duplication that I took the time to clean up as well.
The logic should be easier to follow now that the for-loops are no
longer duplicated for each of the map zoom levels.
I tested this by temporarily disabling map fog entirely and going
through a couple different custom levels to compare their minimap with
the existing code. These were A New Dimension and 333333 for 1x, Golden
Spiral and VVVV 4k for 2x, and VVVVVV is NP-Hard for 4x. There was no
difference in the output, not even a single pixel.
This adds color support to the output of the console on Windows. Now if
you're using Windows 10 build 1511 or later (I think it's build 1511
anyway; they added more VT sequence support in later versions), you will
see colors by default. This isn't due to Windows helping in any way;
this commit has to specifically enable it with SetConsoleMode() because
by default, Windows won't enable color support unless we enable it. (Or
if it's enabled in the registry, but having to go through the registry
to enable basic shit like that is completely fucking stupid.)
I tested this in my Windows 10 virtual machine and it's completely
working.
