might consider adding an Español (latam) edit next year, but this is
enough for 2.4. We're using "Español (es)" instead of "Castellano"
because our translator prefers it
This commit adds translation credits to the game's end credits
screen. Note that this is not implemented into the menu credits
screen yet. The translator name list is subject to tweaks, and
additionally some localised strings ("Localisation Project Led by"
and "Pan-European Font Design by") run off the screen in some
languages (Catalan, Spanish, Irish, Italian, Dutch, European
Portuguese and Ukrainian) and will need to be addressed later.
I put a main focus on the first cutscenes in the game, changing the
first "Uh oh..." from something like "Oh dear..." to "Oh no..." to make
sure it always sounds right. (The real translation of "Uh oh" is "O-o",
but that seemed too easy to read wrong for the first line in the game
that I wanted to avoid it altogether.)
Textboxes created with graphics.createtextboxflipme() use PR_FONT_LEVEL
by default, but can be overridden with graphics.textboxprintflags() to,
for example, set PR_FONT_INTERFACE. This happens for the textboxes on
the Game Complete screen, which use interface text. The textboxes are
centered by setting the X position to -1 though, which means they're
solely centered based on the width of the first line, in the level
font (because the font hasn't been changed to the interface font yet).
Normally, this isn't a problem, because in the main game (where the
Game Complete screen usually appears), the level font is always equal
to the interface font. However, in custom levels you can still get it
(by calling gamestate 3500) and in that case some of the text may be
misaligned. This change fixes that by adding graphics.textboxcenterx()
to these textboxes.
As far as I can tell, these are the only textboxes that are centered
by just x=-1 despite changing the font afterwards.
If you had a pink space station background, and switched to a different
tileset, some solid tiles would be placed instead. This commit fixes
that by transforming the room into the basic autotiling tiles before
changing the tileset itself. The reason why I chose this solution is
because it will help with a future change, being unhardcoding warp zone
backgrounds (which'll help with custom autotiling, if that becomes a
thing.)
Now that the language files are fairly stable, we should be able to do
this without any accidental reverts taking place (if any do happen, it
should be easy to see and prevent)
With the recent change to drawing overlays (images and sprites) from
PR #1058, it's starting to get a bit hairy. This names the conditionals
responsible for determining if the text box is transparent (checking
that all of its RGB is 0) and if overlays should be drawn or not (which
is now either when it's opaque or transparent).
Textsprites and textimages no longer wait for the opacity
value in order to display within transparent textboxes.
Text sprites in normal opaque textboxes are not affected
by this change.
Fixes#1057.
Based on Ethan's hunch, I simply removed the format comparison that
decides whether to halt and restart, or reuse the voice. Voices are
now always restarted when playing a new track.
This also simplifies the code somewhat: `MusicTrack::musicVoiceFormat`
was now no longer used, and an `if (!IsHalted())` was no longer
necessary because `Halt()` already does that. So those are now removed
as well.
This string is used both in time trials (alongside "MORTS :" and
"BLINGS :") as well as outside time trials if you enable the in-game
timer. In English, this looks like "TIME:1:23.45". Since French adds
a space before the colon, it will look like "TEMPS :1:23.45" instead.
Therefore, I've added a space after the colon as well.
At first my CJK changes also misaligned this sprite, and my solution
that time was to position the textbox higher depending on the height
of the textbox, so it would be centered around the crewmate sprite
(which stayed at a hardcoded place onscreen). Recently, #987 changed
these sprites to be relative to the position of the textbox instead of
relative to the screen, which is much more logical, but it stopped
centering these sprites again. But it's an easy fix: simply account for
the extra-added height when adding the sprite in.
This hasn't been relevant for years now. Even in 2.3, this wasn't
relevant, but we added a disclaimer saying that it only applies to 2.2.
But now issue #1052 has been opened specifically pointing to this
section as something that should be removed. Therefore, I'm removing it.
This fixes a regression caused by PR #923 (the PR that moved rendering
to be GPU-based) where the interpolation of the horizontal and vertical
warp backgrounds (in over-30-FPS mode) was in the wrong direction, which
makes them look blurry.
This happens because the arguments to the `lerp` function were in the
wrong, reverse order.
On the VVVVVV Discord server, Ally raised the argument that they were in
the same order before she made the changes; therefore the previous code
was also incorrect and it wasn't her fault. However, this argument is
incorrect, because in that case, the reverse order _is_ the correct
order.
The reason that it's now the wrong order is because the output of `lerp`
is now being used as the argument to a source rectangle. Previously, the
output of `lerp` was being used as the offset argument to
`ScrollSurface`, which is analogous to being a destination rectangle.
Fixes#1038.
The main issue was mostly that we have to build C files as C++ in some
cases, and extern "C" wasn't being used everywhere, so linker errors
popped up. The rest is the usual tedious VS2010 stuff like casting void*
to other stuff, so this commit as a whole is pretty boring!
*subject to changes
Also, Traditional Chinese is current using the Simplified Chinese graphics, which is acceptable but not ideal:
Obey -> 服從 (ok to use simplified 服从)
Lies -> 謊言 (ok to use simplified 谎言)
The other words are the same for Simplified Chinese and Traditional Chinese.
commit 3d6802add8
Author: Dav999 <dav999.tolp@gmail.com>
Date: Thu Oct 19 17:16:01 2023 +0200
Change AVOID to FAINIC in Irish
commit 21fd84f479
Author: Dav999 <dav999.tolp@gmail.com>
Date: Thu Oct 19 17:04:27 2023 +0200
Partial final strings for Esperanto
This does not yet include the new localization credits, but I already
had all the other strings.
commit 45382a358c
Author: Dav999 <dav999.tolp@gmail.com>
Date: Thu Oct 19 17:01:30 2023 +0200
Final strings for Dutch
I also decided to change AVOID from ONTWIJKEN to ONTWIJK, to make it
a bit more fitting as if it's an actual word enemy with length
restrictions, heh. (Not that it's an abbreviation - it's just an
imperative instead of an infinitive. And those terms I had to look up)
This commit adds new debug lines while you're NOT hovering over an
entity or a block. Additionally, coordinates are now displayed smaller,
to not take up as much vertical space.
The level debugger is toggleable in playtesting mode by pressing Y.
You can toggle whether or not the game is paused inside of the debugger
by pressing TAB. The debugger screen allows you to see entity and block
properties, and allows you to move them around.
The hardest room used to be stored as a room name in whatever language
it was in when you last died enough times to break the record (before
localization, that was always English). Even after localization became
a thing we could get away with this since we only had a single font,
but now we might have actual question marks appearing when the new font
doesn't support characters from the old language.
Therefore, this commit adds more info about the hardest room to save
files - everything that is needed to know in order to do the
translation at display time. These are hardestroom_x and hardestroom_y
for the room coordinates, as well as hardestroom_specialname to mark
special names, in addition to changing the stored room name back to
English. I've also added hardestroom_finalstretch in case we later
decide to drop the English name as a key and rely on just the
coordinates (even though I think that change itself would be more
complicated than any simplification it would accomplish, and I don't
think it's necessary, but better to have it if we do need it later)
As described in #1016, there used to be a bug that inflated
levelstats.vvv in 2.3, which was fixed in 2.4, but there was no way
for inflated files to get smaller yet.
This commit changes the storage of levelstats from a std::vector of
structs to a std::map, so that uniqueness is guaranteed and thus the
stats can be optimized automatically. And it also simplifies *and*
optimizes the code that handles the levelstats - no more big loops that
iterated over every element to find the matching level.
(Farewell to the "life optimisation and all that" comment, too)
I tested this with both my own levelstats.vvv, as well as some inflated
ones (including Balneor's 93 MB one) and saw this code correctly reduce
the filesize and speed up the levels list.
Fixes#1016.
The declarations of `std::vector<std::string> customlevelnames` and
`std::vector<int> customlevelscores` are made quite early in the
function, commented with "Old system", but the place where the old
system is processed is after a big chunk of code that processes the new
system (and indeed never uses these vectors). So for readability,
they're now closer to where they're used.
`levelcomplete` and `gamecomplete` were hardcoded using textbox colors
which were offset by 1. This PR fixes that, no longer requiring
slightly-off colors, and instead adding a new property to textboxes
which tell the game to display either level complete or game complete.
This commit adds a system for displaying sprites in textboxes, meant to
replace the hardcoded system in the main game. This does not support
levelcomplete.png and gamecomplete.png yet, which will most likely just
be special cases.
This ensures loading a 2.4 save in the English-only 2.3 or earlier
doesn't result in missing characters because a translated area name
appears in the save file. We are not reading from <summary> anymore
in 2.4.
The way this is done is by not translating the area names inside
mapclass::currentarea(), but at the callsites other than the one which
saves the <summary>.
For both `tele` and `quick`, I removed these attributes of class Game:
- std::string *_gametime
- int *_trinkets
- std::string *_currentarea
- bool *_crewstats[numcrew]
All this info can now be gotten from members of Game::last_telesave and
Game::last_telesave. I've also cleaned up the continue menu to not have
all the display code appear twice (once for telesave and once for
quicksave).
RIP "Error! Error!" though lol
This is what got saved to the area part of the <summary> tags, and it
was specifically set upon pressing ACTION to save in the map menu.
Which meant tsave.vvv may not get an accurate area name (notably
"nowhere" if you hadn't quicksaved before in that session) even though
it's not displayed anywhere so it didn't really matter. But this
variable can be removed - there's only one place where <summary> is
written for both quicksaves and telesaves, so that now gets the area
at saving time.
Fun fact: custom level quicksaves also have a <summary> tag, and it's
even less functional than the one in tsave.vvv, because it stores
whatever main-game area name applies to your current coordinates.
So I simply filled in the level's name instead (just like what the
actual save box says).
Game::telesummary and Game::quicksummary stored the summary string for
the save files - which is the <summary> tag that says something like
"Space Station, 10:30:59". The game only ever displays the quicksave
variant of these two, for "Last Save:" on the map menu's SAVE tab.
So the telesave has a <summary> too, but it's never displayed anywhere.
(In fact, the area is often set to "nowhere"...)
However, the summary strings have another function: detect that both
the telesave and quicksave exist. If a summary string for a save is
empty, then that save is considered not to exist.
I'm refactoring the summary string system, by making the new variables
Game::last_telesave and Game::last_quicksave of type struct
Game::Summary. This struct should have all data necessary to display
the summary string at runtime, and thus translate it at runtime (so
we don't store a summary in a certain language and then display it in
the wrong font later - the summary can always be in the current
language). It also has an `exists` member, to replace the need to
check for empty strings.
The <summary> tag is now completely unused, but is still written to
for older versions of the game to read.
(This commit does not add the new string to the language files, since
Terry now added it separately in his own branch)
It used to take a single int: the area number returned by
mapclass::area(roomx, roomy). All uses of currentarea() were called
with an extra area() call as its argument. Additionally, there's a
good reason why currentarea() should have the room coordinates: in one
of the cases that it's called, there's a special case for the ship's
coordinates. This results in the SAVE screen in the map menu being able
to show "The Ship", while the continue screen shows "Dimension VVVVVV"
instead. Therefore, why not put that exception inside currentarea()
instead, and remove a few callsite map.area() wrappers by making
currentarea() take the room x and y coordinates?
