This removes the magic numbers previously used for controlling the fade
mode, which are really not readable at all unless you already know what
they mean.
0: FADE_NONE
1: FADE_FULLY_BLACK
2: FADE_START_FADEOUT
3: FADE_FADING_OUT
4: FADE_START_FADEIN
5: FADE_FADING_IN
There is also the macro FADEMODE_IS_FADING, which indicates when the
intention is to only check if the game is fading right now, which wasn't
clearly conveyed previously.
I also took the opportunity to clean up the style of any lines I
touched. This included rewriting if-else chains into case-switches,
turning one-liner if-then statements into proper blocks, fixing up
comments, and even commenting the `fademode == FADE_NONE` on the tower
spike checks (which, it was previously undocumented why that check was
there, but I think I know why it's there).
As for type safety, we already get some by transforming the variable
types into the enum. Assignment is prohibited without a cast. But,
apparently, comparison is perfectly legal and won't even give so much as
a warning. To work around this and make absolutely sure I made all
existing comparisons now use the enum, I temporarily changed it to be an
`enum class`, which is a C++11 feature that makes it so all comparisons
are illegal. Unfortunately, it scopes them in a namespace with the same
name as a class, so I had to temporarily define macros to make sure my
existing code worked. I also had to temporarily up the standard in
CMakeLists.txt to get it to compile. But after all that was done, I
found the rest of the places where a comparison to an integer was used,
and fixed them.
This prevents writing to unlock.vvv or settings.vvv if the game hasn't
made an attempt to load them yet. Otherwise, if the game aborted via
VVV_exit() because of, say, failure to parse a graphics file, it would
overwrite perfectly existing valid save data since it hasn't loaded it
yet.
Fixes#870.
This is mainly to make sure the game is definitely set to fullscreen in
Big Picture and on the Steam Deck, and to also remove windowed options
that wouldn't make sense if you're not on a desktop (toggling
fullscreen, resize to nearest). Those options would also be removed on
console and mobile too.
There's a bit of an annoying bug where if you launch the game in forced
fullscreen mode, but then exit and relaunch in normal mode, your game
will have fullscreen window sizes but it won't be fullscreen. This is
because forced fullscreen mode tries to preserve your non-forced
fullscreen setting, but due to the way window sizes are stored and
queried, it can't preserve the non-forced window size. This is a bit
difficult to work around, so I'm just putting in a FIXME here because we
can fix it later and I'd rather have a slightly buggy forced fullscreen
mode than not have one at all.
Closes#849.
Here's my notes on all the existing functions and what kind of time
formats they output:
- Game::giventimestring(int hrs, int min, int sec)
H:MM:SS
MM:SS
- Game::timestring()
// uses game.hours/minutes/seconds
H:MM:SS
MM:SS
- Game::partimestring()
// uses game.timetrialpar (seconds)
MM:SS
- Game::resulttimestring()
// uses game.timetrialresulttime (sec) + timetrialresultframes (1/30s)
MM:SS.CC
- Game::timetstring(int t)
// t = seconds
MM:SS
- Game::timestringcenti(char* buffer, const size_t buffer_size)
// uses game.hours/minutes/seconds/frames
H:MM:SS.CC
MM:SS.CC
- UtilityClass::timestring(int t)
// t = frames, 30 frames = 1 second
S:CC
M:SS:CC
This is kind of a mess, and there's a lot of functions that do the same
thing except using different variables. For localization, I also want
translators to be able to localize all these time formats - many
languages use the decimal comma instead of the decimal point (12:34,56)
maybe some languages really prefer something like 1時02分11秒44瞬...
Which I don't know to be correct, but it's good to be prepared for it
and not restrict translators arbitrarily to only changing ":" and "."
when we can start making the system better in the first place.
I added a new function, UtilityClass::format_time. This is the place
where all time formats come together, given the number of seconds and
optionally frames. I have simplified the above-mentioned functions
somewhat, but I haven't given them a complete refactor or renaming -
I mainly made sure that they all use the same backend so I can make the
formats consistent and properly localizable.
(And before we start shoving more temporary char buffers everywhere
just to get rid of the std::string's, maybe we need to think of a
globally used working buffer of size SCREEN_WIDTH_CHARS+1, as a
register of sorts, for when any line of text needs to be made or
processed, then printed, and then goes unused. Maybe help.textrow,
or something like that.)
As for this commit, the available time formats are now more consistent
and changed a little in some places. Leading zeroes for the first unit
are now no longer included, time trial results and the Super Gravitron
can now display hours when they went to 60 minutes before, and we now
always use .CC instead of :CC. These are the formats:
- H:MM:SS
- H:MM:SS.CC
- M:SS
- M:SS.CC
- S.CC (only used when always_minutes=false, for the Gravitrons)
Here's what changes to the current functions:
- Game::partimestring() is removed - it was used in two places, and
could be replaced by game.timetstring(game.timetrialpar)
- Game::giventimestring(h,m,s) and Game::timestring() are now wrappers
for the other functions
- The four remaining functions (Game::resulttimestring(),
Game::timetstring(t), Game::timestringcenti(buffer, buffer_size)
and UtilityClass::timestring(t)) are now wrappers for the "central
function", UtilityClass::format_time.
- UtilityClass::twodigits(int t) is now unused so it's also removed.
- I also added int UtilityClass::hms_to_seconds(int h, int m, int s)
This includes:
- Removing the constructor in favor of actually being able to see that
there's an actual function called being made initializing the struct
- Removing the use of a reference in Screen::init() in favor of using a
pointer
- Adding the struct qualifier everywhere (it's not much typing),
although technically you could typedef it in C, but I'd rather much
not typedef just to remove a tag qualifier
I know earlier I removed the gameScreen extern in favor of using
screenbuffer, but that was only to be consistent. After further
consideration, I have found that it's actually really stupid.
There's no reason to be accessing it through screenbuffer, and it's
probably an artifact of 2.0-2.2 passing stack-allocated otherwise-global
classes everywhere through function arguments. Also, it leads to stupid
bugs where screenbuffer could potentially be NULL, which has already
resulted in various annoying crashes in the past. Although those could
be fixed by simply initializing screenbuffer at the very top of main(),
but, why not just scrap the whole thing anyway?
So that's what I'm doing.
As a nice side effect, I've removed the transitive include of Screen.h
from Graphics.h. This could've been done already since it only includes
it for the pointer anyway, but it's still good to do it now.
It's been long overdue that this variable be named properly. 2.2 added
integer scaling mode (thanks Ethan), 2.3 renamed it to scaling mode. Now
2.4 will properly call it what it is so people won't be confused by it.
The ScreenSettings struct member is renamed from stretch to scalingMode
along with the Screen class member being renamed, as well as the
toggleStretchMode function being renamed to toggleScalingMode as well.
Unfortunately, due to compatibility, we can't change the <stretch> XML
tag.
VVV_min/max are functions that only operate on ints, and SDL_min/max are
macros that operate on any type but double-evaluate everything.
I know I more-or-less said earlier that SDL_min/max were dumb but I've
changed my mind and think it's better to use them, taking care to make
sure you don't double-evaluate, rather than trying to generate your own
litany of functions with either your own hand-rolled generation macros,
C++ templates, C11 generics, or GCC extensions (that last one you'd
technically use in a macro but it doesn't really matter), all of which
have more downsides than just not double-evaluating.
And the upside of not double-evaluating is that you're disencouraged
from having really complicated single-line min/max expressions and
encouraged to precompute the values beforehand anyway so the final
min/max is more readable. And furthermore you'll notice when you
yourself end up doing double-evaluations anyway. I removed a couple
instances of Graphics::len() being double-evaluated in this commit (as
well as cleaned up some other min/max-using code). Although the only
downside to those double-evaluations was unnecessary computation,
rather than checking the wrong result or having multiple side effects,
thankfully, it's still good to minimize double-evaluations where
possible.
This adds centiseconds to the in-game timer, as well as the time trial
timer.
This is to aid speedrun moderators in determining when exactly a run was
completed, which they can't easily do if the timer only has a precision
up to a second.
Currently, all game-gamestate variables are just ints. This is not
particularly type-safe, in case the number of enums changes. To verify
that all current uses of the game-gamestate variables actually use the
enums, change them to be typed with the enum instead.
(As an aside, we should probably rename this so that it can't be
confused with Terry's state machine that has several different ways to
exploit to warp you to the credits, but that's something to do later.)
The game will now assert if the main menu is created while
ingame_titlemode is true, or if we attempt to load into a mode while
it's true. And if assertions are disabled then it just stops doing it
anyway.
I don't think there's any way to get a glitched ingame_titlemode again,
ever since I removed save data deletion taking you back to the main
menu. But I've had enough bugs with the fact that we more-or-less use
the same state for main menu options and in-game options, and that
glitched ingame_titlemode bug DID just happen, so I'm taking
precautions.
While I was testing deleting data while you were in-game, I noticed that
deleting data gave you all the "Win with less than X deaths" trophies,
even if you never got any of them before deleting data. Well, it turns
out that if you have the best game death count of 0, then you win every
trophy, and if you have the best game death count of -1 then that means
you haven't completed the game yet.
This reset was added in e3bfc79d4a, so at
least it's not in 2.3, but I only have myself to blame for making this
mistake. Whoops.
* Add `setactivityposition(x,y)`, add new textbox color `transparent`
This commit adds a new internal command as a part of the visual activity zone changes I've been making.
This one allows the user to reposition the activity zone to anywhere on the screen.
In addition, this commit adds the textbox color `transparent`, which just sets r, g and b to 0.
rgb(0, 0, 0) normally creates the color black, however in VVVVVV textboxes, it makes the background
of them invisible, and makes the text the off-white color which the game uses elsewhere.
* add new variables to hardreset
* Fix unwanted text centering; offset position by 16, 4
It makes sense for `setactivityposition(0, 0)` to place the activity zone in the default position,
so the x has been offset by 16, and the y has been offset by 4.
Text was being automatically centered, meaning any activity zone which wasn't centered had misplaced text.
This has been fixed by calculating the center manually, and offsetting it by the passed value.
Believe it or not, there are still some remnants of the ActionScript
coding standards in the codebase! And one of them sometimes pops up
whenever an integer division happens.
As it so happens, it seems like division in ActionScript automatically
produces a decimal number. So to prevent that, the game sometimes
subtracts off the remainder of the number to be divided before
performing the division on it.
Thus, we get statements that look like
(a - (a % b)) / b
And probably more parentheses surrounding it too, since it would be
copy-pasted into yet another larger expression, because of course it
would.
`(a % b)` here is subtracting the remainder of `a` divided by `b`, using
the modulo operator, before it gets divided by `b`. Thus, the number
will always be divisible by `b`, so dividing it will mathematically not
produce a decimal number.
Needless to say, this is unnecessary, and very unreadable. In fact, when
I saw these for the first time, I thought they were overcomplicated
_modulos_, _not_ integer division! In C and C++, dividing an integer by
an integer will always result in an integer, so there's no need to do
all this runaround just to divide two integers.
To find all of these, I used the command
rg --pcre2 '(.+?).+?-.+?(?=\1).+?%.+?([\d]+?).+?\/.+?(?=\2)'
which basically matches expressions of the form 'a - a % b / b', where
'a' and 'b' are identical and there could be any characters in the
spaces.
Constants.h will house constants like the screen size and others. But
basically only the screen size for now.
Now we don't have to type that "4 bytes per 40 chars (whole screen)"
comment everywhere...
Since those are all downstream recipients of either static storage or
memory that doesn't move for the duration of the custom level, it's okay
to make these be `const char*`s without having to redo any of the RAII
memory management.
mapclass::currentarea() is included in this as well. I also cleaned up
Tower.cpp's headers to fix some transitive includes because I was
removing UtilityClass.h includes from all other level files too.
The "Untitled room" names no longer show any coordinates, because doing
so would require complicated memory management that's completely
unneeded. No one will ever see them, and if they do they already know
they have a problem anyway. The only time they might be able to see them
is if they corrupted the areamap, but this was only possible in 2.2 and
previous by dying outside the room deaths array in Outside Dimension
VVVVVV, which has since been patched out. Besides, sometimes the
"Untitled room" gets overwritten by something else anyway (especially in
Finalclass.cpp), so it really, really doesn't matter.
So, I ended up breaking supercrewmate spawning with that roomchange
refactor. However, upon investigating how to fix it, I was running into
a weird interpolation issue due to scmmoveme, as well as the companion
spawning in the ground in "Very Good". And I was wondering why I or no
one else ended up running into them.
Well, as it turns out, scmmoveme ends up doing absolutely nothing. There
are only two instances where scmmoveme is used. The first is if you
respawn in "Very Good", and somehow have your scmprogress set to that
room. But that's impossible, because whenever you respawn, your
scmprogress is always set to the one after the room you respawn in. Even
if you respawned in the room previous to "Very Good" (which is "Don't
Get Ahead of Yourself!"), it still wouldn't work, since the logic always
kicks in when a gotoroom happens, and not only when a supercrewmate is
actually spawned. Since the scmprogress doesn't match, that case never
gets triggered, and we get to the second time scmmoveme is used, which
is in the catch-all case that always executes.
This second instance... also does nothing, because since we just
respawned, and our scmprogress got set to the room ahead of us, there is
no supercrewmate on screen. Then getscm() returns 0, and the player is
always indice 0, so the only thing we end up doing is setting the
player's x-position to their own x-position. Brilliant.
Anyway, this code results in interpolation issues and the supercrewmate
spawning in the ground on "Very Good" if you die, when my fix is
applied, because my fix moves this logic around to a different frame
order, and that actually ends up making scmmoveme no longer dead code.
So to recap: we have dead code, which looks like it does something, but
doesn't. But if you move it around in a certain way, it ends up having
harmful effects. One of the joys of working on this game...
It's also hilarious that it gets saved to the save file. Why? The only
time this variable is true, it is for literally less than a frame,
because it always gets set to false, because you always respawn using a
gotoroom whenever the supercrewmate dies, because you never respawn in
the same room as a supercrewmate, because Intermission 1 was
deliberately designed that way (else you'd keep continually dying since
the supercrewmate wouldn't move out of the way).
When you're on the music changing screen in the editor, it plays the
current track. When you return, it stops playing the track. However, if
you press escape, it doesn't stop playing the track. This is because
pressing escape just returns to the previous menu without stopping
playing the track.
To fix this, I just added some kludge in the return menu function. This
is kinda super bad but it works for now and is just something to clean
up later. Maybe like each menu having exit callbacks or something, I
dunno.
This is kinda a regression, kinda sorta not. In 2.2 and previous,
pressing escape would just close the settings menu entirely, which also
bypassed the music fadeout. 2.3 made it so pressing escape doesn't
entirely close the settings menu, and just returns to the previous menu,
which fails in a different way. But the intended way is definitely to
select the return option and having the music fade out.
This function now properly deletes the Super Gravitron record, the Super
Gravitron rank, and the best game deaths. They were not being properly
reset previously, meaning you would have to go into your save file to
properly clean out your save data.
This was done in 2.2 and previous probably to fix the fact that there
were multiple conflicting audio controls (the player wants to mute the
audio but the game wants to fade in the audio), but is now actively
harmful since 2.3, because muting the game while finishing the
completion prompt means the music will never come back in, even after
unmuting.
I also notice that when collecting a custom crewmate, the game checks
for the level's start music instead of if there's actually a current
song playing right now. I don't know why this was done, because it
would've been better to copy-paste the trinket collection logic here.
It's entirely possible for the audio to just be muted and never come
back if the level has no start music but plays a song by using a script.
Anyways, leaving it alone because it's quite possible that a level might
be intentionally designed around this, I can't really tell the
intentions of every level creator, and it's easy to work around (either
don't use custom crewmates, which every modern level basically does
nowadays, or just set the start music).
For some reason, when completing a custom level and fading to the menu,
the game attempts to fade the music in and also fade the music out at
the same time. This results in nothing happening at all, and in 2.2 and
previous, results in audio fading out from max volume while the game is
frozen on a black screen after the fadeout.
To avoid any potential badness, just remove these.
If it's at all possible to use `const std::string&` when passing
`std::string`s around, then we use it. This is to limit the amount of
memory usage as a result of the frequent use of `std::string`s, so the
game no longer unnecessarily copies strings when it doesn't need to.
This fixes a bug where the player could bring up the map on the very
first frame of a gamemode(game) animation. This is because the menu
animation checked graphics.menuoffset, but graphics.menuoffset wouldn't
have changed at that point because it only set graphics.resumegamemode.
Instead, just check for graphics.resumegamemode directly. We also need
to assign it to false whenever the map is closed so the player won't be
prevented from using the map screen again.
This fixes all the headaches about map.extrarow having to be the correct
value and which way it should be and whatnot. The latest headache was
the detection that prevent user-initiated menu animations while an
animation was already happening being tripped because
graphics.menuoffset would be 230 (due to closing the menu while being in
a room without a room name), but then going to a room with a room name
would check for 240 instead, and 230 is less than 240. (The numbers are
the wrong way round because I got the ternaries the wrong way round, but
even if the numbers are the correct way round, the bug would still
happen, but it would just be reversed.)
So instead, I've just made it 240 for both. This doesn't change the
duration of the menu animation (because the animation moves in
increments of 25, and 230 / 25 == 240 / 25 under integer division). It
might change the animation slightly, but it was already inconsistent
anyway because map.extrarow was always set to be 1 in custom levels, and
I legitimately would not be able to tell the difference without
recording the animations and nitpicking it frame-by-frame.
Fixes#841.
The player gets kicked out of the Super Gravitron if they have
invincibility or slowdown enabled. However, this can be confusing if no
message pops up
( https://steamcommunity.com/app/70300/discussions/0/3039355280230178910/ )
. So I've made it so that a text box will pop up when they get kicked
out.
This makes it so it's not even possible to stay on the TELEPORTERMODE
screen by opening the map while it's being brought down. It also makes
it so the map animation is able to be canceled when being brought up
just by opening the map and closing it.
Fixes#833.
Also, add a sync parameter to avoid calling syncfs too often.
Calling syncfs twice in a row is both inefficient and leads to errors
displaying twice. This allows us to bypass it when saving unlock.vvv as
part of savestatsandsettings.
This is a pretty hefty commit! But essentially, I made a new editorclass
object, and moved all functions and variables that only get used in the
in-game level editor to that class. This cleanly demarcates which things
are in the editor and which things are just general custom level stuff.
Then I fixed up all the callers. I also fixed up some NO_CUSTOM_LEVELS
and NO_EDITOR ifdefs, too, in several places.
This accompanies the editor.cpp -> CustomLevels.cpp change; I'll be
splitting out the editor functions in the next commit. The name of the
include guard has been changed as well, but not anything else.
All XML functions now check the return value of
tinyxml2::XMLDocument::Error() after each document gets loaded in to
TinyXML-2. If there's an error, then all functions return. This isn't
strictly necessary, but printing the error message that TinyXML-2 is the
bare minimum we could do to be useful.
Additionally, I've standardized the error messages of missing or
corrupted XML files.
Also, the way the game went about making the XML handles was... a bit
roundabout. There were two XML handles, one for the document and one for
the root element - although only one XML handle suffices. So I've
cleaned that up too.
I could've gone further and added error checking for a whole bunch of
things (e.g. missing elements, missing attributes), but this is good
enough.
Also, if unlock.vvv or settings.vvv don't exist yet, the game is
guaranteed to no-op instead of continuing with the function. Nothing bad
seems to happen if the function continues, but the return statements
should be there anyway to clearly indicate intent.
If settings.vvv doesn't exist, loadsettings() calls savesettings(), but
savesettings() already prints a message if settings.vvv doesn't exist.
So then the output would look like
No settings.vvv found. Creating new file
No settings.vvv found
Which is clearly redundant.
The same thing happens with unlock.vvv, but in that case the following
prints instead
No unlock.vvv found. Creating new file
No Stats found. Assuming a new player
I will need to be able to return from this function if there's an XML
error, otherwise writing out the control flow manually gets really
nasty. And while I'm at it, it's some a nice de-duplication as well.
To do this, we create a temporary struct that bundles up all the
information we want for the summary, and pass it in to the intermediate
load function.
Furthermore, we can get rid of reading map.finalstretch - it affects
nothing. map.finalmode is still needed, however, because of the usage of
map.area().
We need to check for graphics.setflipmode, not graphics.flipmode,
because graphics.flipmode only gets assigned at the end of the frame
(due to the deferred callback). Otherwise, returning from the options
menu would always turn flag 73 on, which would make you ineligible to
get the Flip Mode trophy, even if you're in Flip Mode.
Originally this started as a "deduplicate a bunch of duplicated code in script commands" PR,
but as I was working on that, I discovered there's a lot more that needs to be done than
just deduplication.
Anything which needs a crewmate entity now calls `getcrewmanfromname(name)`, and anything which
just needs the crewmate's color calls `getcolorfromname(name)`. This was done to make sure that
everything works consistently and no copy/pasting is required. Next is the fallback; instead of
giving up and doing various things when it can't find a specific color, it now attempts to treat
the color name as an ID, and if it can't then it returns -1, where each individual command handles
that return value. This means we can keep around AEM -- a bug used in custom levels -- by not
doing anything with the return value if it's -1.
Also, for some reason, there were two `crewcolour` functions, so I stripped out the one in
entityclass and left (and modified) the one in the graphics class, since the graphics class also
has the `crewcolourreal` function.
The purpose of this variable was to keep track of if gamelogic() called
map.gotoroom() at any point during its execution. So map.gotoroom()
always unconditionally set it to true, and then gamelogic() would check
it later.
Well, there's no need to put that in a global variable and do it like
that! It makes it less clear when you do that.
So what I've done instead is made a temporary macro wrapper around
map.gotoroom() that also sets roomchange to true. I've also made it so
any attempt to use map.gotoroom() directly results in failure (and since
then using map.gotoroom() in the wrapper macro would also fail, I've had
to make a gotoroom wrapper function around map.gotoroom() so the wrapper
macro itself doesn't fail).
To match the option to nuke all main game save data, there is also now
an option to nuke all custom level save data separately (which is just
all custom level quicksaves, along with stars for level completion). It
has its own confirmation menu too. It does not delete any levels from
the levels folder.
Custom level quicksaves are NOT affected by the clear data menu, so the
player should be able to delete quicksaves this way. The quicksave
confirmation menu now has an extra option to delete the save (and that
option also has its own confirmation menu before deleting).
It's possible to get one page of levels by removing all the built-ins,
either by removing them directly from data.zip or by putting files with
the same filenames as them in your level folder that don't contain
nothing.
And hey, there's already a check for if no levels exist at all, so why
not check for this too?
Previously, you would only get the trinket completion star if you got
the exact same amount of trinkets as there are custom entity trinkets in
the level file. But if you got more (say, if the level spawned extra
"bonus trinkets"), you wouldn't be able to get the star.
This is true of the custom crewmate case as well, but I've decided to
not change that case, because there are still downsides to the resulting
behavior and it's better to just leave it alone because it's rare for it
to happen anyways.
Since custom levels have gained the functionality to show trinkets on
the minimap, it's nice to just save the showtrinkets variable directly
to the save file, without having to make level makers handle it
themselves.
If you have unfocus pause off, and unfocus audio pause off, then this command will go into effect.
When it's set to on, the audio will pause when you unfocus the game. When it's set to off, the
audio will not. This is different from the setting, and gets saved to the save file.
If a zip file is improperly structured, a message will be displayed when
the player loads the level list.
This will only display the last-displayed improper zip, because there
only needs to be one displayed at a time. Also because doing anything
more would most likely require heap allocation, and I don't want to do
that.
Some people prefer the 2.2 behavior where unfocusing pauses the game,
but the music still plays. One such person is Trinket9 on the VVVVVV
Discord server, who wanted it that way.
The reason audio pausing was added in the first place was to prevent
desyncing music in levels with cutscenes that synced to music. Rather
than reverting it, let's add this option instead.
Previously, turning glitchrunner mode on essentially locked you to
emulating 2.0, and turning it off just meant normal 2.3 behavior. But
what if you wanted 2.2 behavior instead? Well, that's what I had to ask
when a TAS of mine would desync in 2.3 because of the two-frame delay
fix (glitchrunner off), but would also desync because of 2.0 warp lines
(glitchrunner on).
What I've done is made it so there are three states to glitchrunner mode
now: 2.0 (previously just the "on" state), 2.2 (previously a state you
couldn't use), and "off". Furthermore, I made it an enum, so in case
future versions of the game patch out more glitches, we can add them to
the enum (and the only other thing we have to update is a lookup table
in GlitchrunnerMode.c). Also, 2.2 glitches exist in 2.0, so you'll want
to use GlitchrunnerMode_less_than_or_equal() to check glitchrunner
version.
In earlier 2.3, if the roomname was empty, Dimension VVVVVV was used
instead. However, instead of doing that, it's better to just use the
hiddenname instead. Both because it's less hardcoded, and some rooms
have hidden names that aren't Dimension VVVVVV.
Upon further discussion it was decided to keep the soundtrack as originally
shipped, instead of changing it after the fact.
This reverts commit cf51379097.
This fixes an oversight that could lead to confusion by the player.
showtargets is the variable that shows all unexplored teleporters on the
map as a question mark, so players know where to head to to make
progress. However, it previously was not directly saved to the main game
file. Instead, it would be set to true if flag 12 was turned on in the
save file.
How well does flag 12 correlate with showtargets?
Well, the script that turns on showtargets (bigopenworld and
bigopenworldskip) doesn't turn it on. Neither does completing Space
Station 1.
This flag is only turned on when the player activates Violet's activity
zone for the first time.
Therefore, it's entirely possible that a new player could complete Space
Station 1, then save their game, and come back to resume playing later.
When they do come back, the question marks that Violet told them about
won't show up on the minimap, and they'll be confused. They may not know
where to go.
And it is completely unintuitive for them to know that in order to get
the question marks to show up again, they have to not only talk to
Violet, but then save the game again, and reload the save. Especially
since the question marks only show up after you reload the save, and not
when you talk to Violet (because flag 12 is only a proxy for
showtargets, not the actual variable itself).
So what's the solution? Just save showtargets to the save file directly.
This is a lot of copy-pasted code, but a little bit of copy-pasting
never hurt anyone...
The keybind to interact with activity zones and teleporters is now
separate from the keybind to open the map, or return to the editor from
in-editor playtesting, or restart a time trial. The keybind is now E,
and the default controller bind is X. No controller button prompts, but
the game didn't have controller button prompts anyways, so whatever.
Doing this now because if people's muscle memory are going to be broken
by not being able to spam the map keybind anymore, at least we can help
a bit by changing the keybind so they can keep spamming it - their
muscle memory is going to be broken anyways.
This option has to be enabled by going to the speedrunner menu options
and selecting "interact button". It is disabled by default.
All prompt text needs to be string-interpolated every time they are
drawn, because it is possible for people to change which interact button
they use in the middle of gameplay, via the in-game options.
Closes#736.
After the dimension destabilizes, the song that plays is Positive Force.
Which has already been played twice in the game at that point (first in
Tower, then in the Gravitron). Since Piercing the Sky is unused, why not
play a song that the player hasn't heard before? It would also be
musically fitting for the scenario.
The song gets played in two places - one for if you have cutscenes
enabled, and one for if you don't - so we just need to change both of
them.
I asked Terry in Discord DMs if he wanted this change and he approved of
it.
If you had Flip Mode enabled when exiting from in-game options, the game
would flash the in-game options menu as flipped for 1 frame before
returning to the pause menu.
To fix this, just defer the Flip Mode variable assignment to be done at
the end of the frame.
It turns out, despite the game attempting to prevent you from using
invincibility or slowdown in the Super Gravitron by simply preventing
you from entering the Secret Lab from the menu, it's still possible to
enter the Super Gravitron with it anyways. Just have invincibility or
slowdown (or both!) enabled, enter the game normally, and talk to
Victoria when you have 20 trinkets, to start the epilogue cutscene.
Yeah, that's a pretty big gaping hole right there...
It's also possible to do a trick that speedrunners use called
telejumping to the Secret Lab to bypass the invincibility/slowdown
check, too.
So rather than single-case patch both of these, I'm going to fix it as
generally as possible, by moving the invincibility/slowdown check to the
gamestate that starts the Super Gravitron, gamestate 9. If you have
invincibility/slowdown enabled, you immediately get sent back to the
Secret Lab. However, this check is ignored in custom levels, because
custom levels may want to use the Super Gravitron and let players have
invincibility/slowdown while doing so (and there are in fact custom
levels out in the wild that use the Super Gravitron; it was like one of
the first things done when people discovered internal scripting).
No message pops up when the game sends you back to the Secret Lab, but
no message popped up when the Secret Lab menu option was disabled
previously in the first place, so I haven't made anything WORSE, per se.
A nice effect of this is that you can have invincibility/slowdown
enabled and still be able to go to the Secret Lab from the menu. This is
useful if you just want to check your trophies and leave, without having
to go out of your way to disable invincibility/slowdown just to go
inside.
This factors out the slowdown and invincibility conditionals to a
function. This means less copy-pasted code, and it also conveys intent
(that we don't want to allow competitive options if we have either of
these cheats enabled).
This function isn't implemented in the header because then we would have
to include Map.h for map.invincibility, and transitive includes are
evil. Although, map.invincibility ought to be on Game instead (it was
only mapclass due to 2.2-and-previous argument passing), but that's a
bunch of variable reshuffling that can be done later.
They are now factored out to an inline function named incompetitive().
This is so their usage can be changed without having to change each
individual one in every place. This also clarifies the intent of using
these conditionals (they are for when we're in a "competitive" mode).
This boolean is assigned, and it is checked... but it's never assigned
to true, thus making it useless. I also checked 2.2 source and the same
thing happens there; to prevent any confusion, I'm removing this.
The config option has been removed. I'm going to implement something
that automatically shows and hides the mouse cursor whenever
appropriate, which is better than a config option.
This fixes a bug where quitting to the menu from command-line
playtesting with -playassets specified would always use those assets
when loading back in to any custom level. This also fixes loading in to
a custom level quicksave always using the command-line playtesting
arguments instead of using the actual quicksave.
It seems like for whatever reason that the frames portion of save files
is never read from, and always zeroed. Well, technically they get parsed
but the result is immediately discarded afterwards.
I see no reason to do this, so I'm removing these zeroes.
In 2.2 and previous, the game would call resetgameclock() every frame
for the last 30 frames of the time trial countdown in order to make sure
it gets reset. This was in a render function, and didn't get brought out
in 2.3, so 2.3 resets the game clock *while rendering*, which is kinda
bad and is an oversight on my part for not noticing.
Instead of doing that, just add a conditional to the timer so that it
won't tick during the time trial countdown. This fixes#699 even further
by making it so the time trial par can't even be lost during the
countdown, because the timer won't tick up - so you can never get a sad
squeak to play by pausing the game or unfocus-pausing it during the
countdown.
For some reason, resetgameclock() is only ever used in gamerender(), and
everywhere else just zeroes the clock manually. This is weird to me, so
I've made it so everywhere that zeroes the clock uses the
resetgameclock() function to do so.
This adds music and volume sliders to the audio options. To use the
sliders, you navigate to the given option, then press ACTION, and your
selection will be transferred to the slider. Pressing left or right will
move the slider accordingly. Then you can press ACTION to confirm the
volume is what you want and deselect it, or you can press Esc to cancel
the volume change, and it will revert to the previous volume; both
actions will write your settings to disk.
Most of this commit is just adding infrastructure to support having
sliders in menus (without copy-pasting code), which is a totally
completely new user interface that has never been used before in this
game. If we're going to be adding something new, I want to make sure
that it at least is done the RIGHT way.
Closes#706.
This adds <musicvolume> and <soundvolume> tags to unlock.vvv and
settings.vvv, so users' volume preferences will be persistent across
game sessions. This does not add the user interface to change them from
in-game; the next commit will do that.
When a text box in the script system (not the gamestate system) is
displayed onscreen and "- Press ACTION to advance text -" is up, the
game sets pausescript to true, so the script system won't blare past the
text box and keep executing. Then it also sets advancetext to true.
Crucially, these two variables are different, so if you have pausescript
true but advancetext false, then what happens?
Well, you get softlocked. There's no way to continue the script.
How is this possible? Well, you can teleport to the (0,0) teleporter
(the teleporter in the very top-left of the map) and regain control
during the teleporter animation. To do that, in 2.2 and below, you have
to press R at the same time you press Enter on the teleporter, or in 2.3
you can simply press R during the cutscene. Then once you teleport to
the room, it's really precise and a bit difficult (especially if
Viridian is invisible), but you can quickly walk over to the terminal in
that room and press Enter on it.
Then what will happen is the terminal script will run, but the
teleporter gamestate sequence will finish and turn advancetext off in
the middle of it. And then you're softlocked.
To fix this, just add a check so if we're in gamestate 0 and there's a
script running, but we have pausescript on and advancetext off, just
turn pausescript off so the game automatically advances the script.
This softlock was reported by Tzann on the VVVVVV speedrunning Discord.
You can skip the "You have found a shiny trinket!" cutscene. The
conditions are that this can only be done in the main game, in the main
dimension (no Polar Dimension), the checkpoint that you last touched
must not be in the same room as the trinket, and you have to have
skipped the Comms Relay cutscene. To do the skip, you press R on the
exact frame (or previous frame, if input delay is enabled) that Viridian
touches the trinket. Then, the gamestate will be immediately set to 0
(because of the gotoroom) and the cutscene will be skipped.
Speedrunners of the main game, well, run the main game already, the
only trinket in the Polar Dimension is not one you want to do a death
warp at, and they have a habit of automatically skipping over the Comms
Relay cutscene because they press R at the beginning of the run when
Viridian teleports to Welcome Aboard, to warp back to the Ship and so
they can leave rescuing Violet for later.
So someone reported softlocking themselves by doing the trinket text
skip in 2.3. The softlock is because they're stuck in a state where
completestop is true but can't advance to a state that turns it off. How
does this happen? It's because they pressed R too late and interrupted
the gamestate sequence. In 2.2 and previous, if you're in the gamestate
sequence then you can't press R at all, but 2.3 removes this restriction
(on account of aiming to prevent softlocks). So only on the very first
frame can you death warp and interrupt the gamestate sequence before it
happens at all.
Anyways to fix this, just turn completestop off automatically if we're
in gamestate 0 and there's no script running.
This softlock was reported by Euni on the VVVVVV speedrunning Discord.
So some people reported the levels list crashing when they loaded it.
But this wasn't reproducible every time. They didn't provide any
debugging information, so I had to use my backup plan: doing a full
audit of the code path taken for loading the levels list.
And then I found this. It turns out this was because I used a
LOAD_ARRAY_RENAME() macro on an std::vector. You can't do that because
you need to use push_back() to resize a vector, so the macro will end up
indexing into nothing, causing a segfault. However, this code path would
only be taken if you have an old levelstats.vvv, from 2.2 and previous -
which explains why it wasn't 100% reproducible. But now that I know you
need an old levelstats.vvv, this bug happens 100% of the time.
Anyways, to fix this, just ditch the macro and expand it manually, while
replacing the indexing with a proper usage of push_back().
This is an option for speedrunners whose muscle memory is precisely
trained and used to the 1-frame input delay that existed in 2.2 and
below. It is located in Game Options -> Advanced Options, and is off by
default.
To re-add the 1-frame input delay, we simply move the key.Poll() to the
start of the frame, instead of before an input function gets ran -
undoing what #535 did.
There is a frame ordering-sensitive issue here, where toggling
game.inputdelay at the wrong time could cause double-polling. However,
we only toggle it in an input function, which regardless is always
guaranteed to be ran after key.Poll() (it either happened at the start
of the frame or just before the input function got ran), so this is not
an issue. But, in case we ever need to toggle this variable in the
future, we can just use the defer callbacks system to defer the toggle
to the end of the frame - also added by #535.
Added at the request of Habeechee on the VVVVVV speedrunning Discord
server.
While I've decoupled fademode from gamemode starting, being faded out on
the title screen results in a black screen and you being unable to make
any input. So we'll need to store the current fademode in a temporary
variable when going to in-game options, then put it back when we return
to the pause menu. Yes, you can turn on glitchrunner mode during the
in-game options, and then immediately return to the pause menu to
instantly go back to the title screen; this is intended.
Due to frame ordering, putting the fademode back needs to be deferred to
the end of the frame to prevent a 1-frame flicker.
It's actually sufficient enough to do this temporary fademode storage to
fix the whole thing, but I also decided to decouple fademode and
gamemode starting just to be sure.
If an XML tag doesn't contain anything inside, pText will be NULL. If
that happens without being checked, then NULL will be passed to
SDL_strcmp(). SDL_strcmp() will either call libc strcmp() or use its own
implementation; both implementations will still dereference the NULL
without checking it.
This is undefined behavior, so I'm fixing it. The solution is to do what
is done with all other XML parsing functions, and to make sure pText
gets set to a safe empty string (which is just a pointer to a null
terminator) if it happens to be NULL.
PR #279 added game.gametimer solely for the editor ghosts feature. It
seems that whoever originally wrote it (Leo for the now-dead VVVVVV:
Community Edition, I believe) forgot that the game already had its own
timer, that they could use.
The game timer does increment on unfocus pause (whereas this doesn't),
but that's a separate issue, and it ought to not do that.
The background would change for 1 frame before sending you back to the
pause menu or editor settings. The map.nexttowercolour() call needs to
be deferred until the end of the frame.
The new loop order introduces a glitch where the menu would display
whichever menu was saved to kludge_ingametemp for 1 frame right as the
user returned to the pause menu. This happened because the
game.returntomenu() happens in titleinput(), which comes before
titlerender(). To fix this, we just need to defer it to the end of the
frame.
game.shouldreturntoeditor was added to fix a frame ordering issue that
was causing a bug where if you started playtesting in a room with a
horizontal/vertical warp background, and exited playtesting in a
different room that also had a horizontal/vertical warp background and
which was different, then the background of the room you exited in would
slowly scroll offscreen, when you re-entered the editor, instead of the
background consisting entirely of the actual background of the room.
Namely, the issue was that the game would render one more frame of
GAMEMODE after graphics.backgrounddrawn got set to false, and re-set it
to true, thus negating the background redraw, so the editor background
would be incorrect.
With defer callbacks, we can now just use a couple lines of code,
instead of having to add an extra kludge variable and putting handling
for it all over the code.
This ensures that if the player decides to toggle Flip Mode while one of
these text boxes is up, they won't be oriented improperly. Additionally,
it also de-duplicates a bunch of Flip Mode check code, which is also a
win.
The "Game Saved" text box, along with its associated telesave() call,
exists in both Game.cpp and Script.cpp, so one of them is the copy-paste
of the other. Unfortunately this copy-paste resulted in an inconsistency
where both of them don't check for the same things when deciding whether
or not the telesave should actually happen (this is why you don't
copy-paste, kids... it's scary!).
Either way, de-duplicating this now is less work for me later.
Every Level Complete sequence is the same copy-pasted thing, but with
minor changes. To make my work easier, I'm de-duplicating them so I have
less text boxes to change later, and less grind to grind.
These commented-out code blocks just get in the way of clarity when I'm
refactoring flipped textboxes created in the gamestate system. So I'm
getting rid of them. If we need them back, we always have Git history.
To do this, I've added Graphics::setbars(), to make sure
oldcutscenebarspos always gets assigned when cutscenebarspos is. This
fixes potential deltaframe rendering issues if these two mismatch.
While working on #535, I noticed that editormenuactionpress() still
didn't do the explicit void declaration. Then I ran `rg 'void.*\(\)'`
and found three other functions that I somehow missed in #628. Whoops.
Well, now they no longer are missed.
This is a small quality-of-life tweak that makes it so if you're in the
middle of editing a level, you don't have to save the level, exit to the
menu, change whatever setting you wanted, re-enter the editor, and type
in the level name, just to change one setting. This is the same as
adding Graphic Options and Game Options to the in-game pause menu,
except for the editor, too.
To do this, I'm reusing Game::returntopausemenu() (because all of its
callers are the same callers for returning to editor settings) and
renamed it to returntoingame(), then added a variable named
ingame_editormode to Game. When we're in the options menus but still in
the editor, BOTH ingame_titlemode and ingame_editormode will be true.
Since it only ever gets assigned from FILESYSTEM_getUserSaveDirectory(),
and that function returns a C string, and the variable is only ever read
from again, this doesn't need to be an std::string.
There's no need to create an std::string for every single element just
to see if it's a key name.
At least in libstdc++, there's an optimization where std::strings that
are 16 characters or less don't allocate on the heap, and instead use
the internal 16-char buffer directly in the control structure of the
std::string. However, it's not guaranteed that all the element names
we'll get will always be 16 chars or less, and in case the std::string
does end up allocating on the heap, we have no reason for it to allocate
on the heap; so we should just convert these string comparisons to C
strings instead.
Now that recreating the same menu keeps currentmenuoption, we can remove
all these superfluous assignments. This means repeating ourselves less;
in case the option numbers change in the future, we won't have to
remember to update these reassignments, too.
When recreating the same menu, there's basically no reason to reset the
currently-selected menu option. (Also, no need to worry about indexing
out of bounds or anything - the number gets checked while iterating over
all menu options; it's never used to actually index anything. At worst
there might be a 1-frame flicker as the bounds code in gameinput() kicks
in, but that shouldn't happen anyways.)
Apparently in C, if you have `void test();`, it's completely okay to do
`test(2);`. The function will take in the argument, but just discard it
and throw it away. It's like a trash can, and a rude one at that. If you
declare it like `void test(void);`, this is prevented.
This is not a problem in C++ - doing `void test();` and `test(2);` is
guaranteed to result in a compile error (this also means that right now,
at least in all `.cpp` files, nobody is ever calling a void parameter
function with arguments and having their arguments be thrown away).
However, we may not be using C++ in the future, so I just want to lay
down the precedent that if a function takes in no arguments, you must
explicitly declare it as such.
I would've added `-Wstrict-prototypes`, but it produces an annoying
warning message saying it doesn't work in C++ mode if you're compiling
in C++ mode. So it can be added later.
This patch restores some 2.2 behavior, fixing a regression caused by the
refactor of properly using std::vectors.
In 2.2, the game allocated 200 items in obj.entities, but used a system
where each entity had an `active` attribute to signify if the entity
actually existed or not. When dealing with entities, you would have to
check this `active` flag, or else you'd be dealing with an entity that
didn't actually exist. (By the way, what I'm saying applies to blocks
and obj.blocks as well, except for some small differing details like the
game allocating 500 block slots versus obj.entities's 200.)
As a consequence, the game had to use a separate tracking variable,
obj.nentity, because obj.entities.size() would just report 200, instead
of the actual amount of entities. Needless to say, having to check for
`active` and use `obj.nentity` is a bit error-prone, and it's messier
than simply using the std::vector the way it was intended. Also, this
resulted in a hard limit of 200 entities, which custom level makers ran
into surprisingly quite often.
2.3 comes along, and removes the whole system. Now, std::vectors are
properly being used, and obj.entities.size() reports the actual number
of entities in the vector; you no longer have to check for `active` when
dealing with entities of any sort.
But there was one previous behavior of 2.2 that this system kind of
forgets about - namely, the ability to have holes in between entities.
You see, when an entity got disabled in 2.2 (which just meant turning
its `active` off), the indices of all other entities stayed the same;
the indice of the entity that got disabled stays there as a hole in the
array. But when an entity gets removed in 2.3 (previous to this patch),
the indices of every entity afterwards in the array get shifted down by
one. std::vector isn't really meant to be able to contain holes.
Do the indices of entities and blocks matter? Yes; they determine the
order in which entities and blocks get evaluated (the highest indice
gets evaluated first), and I had to fix some block evaluation order
stuff in previous PRs.
And in the case of entities, they matter hugely when using the
recently-discovered Arbitrary Entity Manipulation glitch (where crewmate
script commands are used on arbitrary entities by setting the `i`
attribute of `scriptclass` and passing invalid crewmate identifiers to
the commands). If you use Arbitrary Entity Manipulation after destroying
some entities, there is a chance that your script won't work between 2.2
and 2.3.
The indices also still determine the rendering order of entities
(highest indice gets drawn first, which means lowest indice gets drawn
in front of other entities). As an example: let's say we have the player
at 0, a gravity line at 1, and a checkpoint at 2; then we destroy the
gravity line and create a crewmate (let's do Violet).
If we're able to have holes, then after removing the gravity line, none
of the other indices shift. Then Violet will be created at indice 1, and
will be drawn in front of the checkpoint.
But if we can't have holes, then removing the gravity line results in
the indice of the checkpoint shifting down to indice 1. Then Violet is
created at indice 2, and gets drawn behind the checkpoint! This is a
clear illustration of changing the behavior that existed in 2.2.
However, I also don't want to go back to the `active` system of having
to check an attribute before operating on an entity. So... what do we
do to restore the holes?
Well, we don't need to have an `active` attribute, or modify any
existing code that operates on entities. Instead, we can just set the
attributes of the entities so that they naturally get ignored by
everything that comes into contact with it. For entities, we set their
invis to true, and their size, type, and rule to -1 (the game never uses
a size, type, or rule of -1 anywhere); for blocks, we set their type to
-1, and their width and height to 0.
obj.entities.size() will no longer necessarily equal the amount of
entities in the room; rather, it will be the amount of entity SLOTS that
have been allocated. But nothing that uses obj.entities.size() needs to
actually know the amount of entities; it's mostly used for iterating
over every entity in the vector.
Excess entity slots get cleaned up upon every call of
mapclass::gotoroom(), which will now deallocate entity slots starting
from the end until it hits a player, at which point it will switch to
disabling entity slots instead of removing them entirely.
The entclass::clear() and blockclass::clear() functions have been
restored because we need to call their initialization functions when
reusing a block/entity slot; it's possible to create an entity with an
invalid type number (it creates a glitchy Viridian), and without calling
the initialization function again, it would simply not create anything.
After this patch is applied, entity and block indices will be restored
to how they behaved in 2.2.
The current way "arrays" from XML files are loaded (before this commit
is applied) goes something like this:
1. Read the buffer of the contents of the tag using TinyXML-2.
2. Allocate a buffer on the heap of the same size, and copy the
existing buffer to it. (This is what the statement `std::string
TextString = pText;` does.)
3. For each delimiter in the heap-allocated buffer...
a. Allocate another buffer on the heap, and copy the characters from
the previous delimiter to the delimiter you just hit.
b. Then allocate the buffer AGAIN, to copy it into an std::vector.
4. Then re-allocate every single buffer YET AGAIN, because you need to
make a copy of the std::vector in split() to return it to the caller.
As you can see, the existing way uses a lot of memory allocations and
data marshalling, just to split some text.
The problem here is mostly making a temporary std::vector of split text,
before doing any actual useful work (most likely, putting it into an
array or ANOTHER std::vector - if the latter, then that's yet another
memory allocation on top of the memory allocation you already did; this
memory allocation is unavoidable, unlike the ones mentioned earlier,
which should be removed).
So I noticed that since we're iterating over the entire string once
(just to shove its contents into a temporary std::vector), and then
basically iterating over it again - why can't the whole thing just be
more immediate, and just be iterated over once?
So that's what I've done here. I've axed the split() function (both of
them, actually), and made next_split() and next_split_s().
next_split() will take an existing string and a starting index, and it
will find the next occurrence of the given delimiter in the string. Once
it does so, it will return the length from the previous starting index,
and modify your starting index as well. The price for immediateness is
that you're supposed to handle keeping the index of the previous
starting index around in order to be able to use the function; updating
it after each iteration is also your responsibility.
(By the way, next_split() doesn't use SDL_strchr(), because we can't get
the length of the substring for the last substring. We could handle this
special case specifically, but it'd be uglier; it also introduces
iterating over the last substring twice, when we only need to do it
once.)
next_split_s() does the same thing as next_split(), except it will copy
the resulting substring into a buffer that you provide (along with its
size). Useful if you don't particularly care about the length of the
substring.
All callers have been updated accordingly. This new system does not make
ANY heap allocations at all; at worst, it allocates a temporary buffer
on the stack, but that's only if you use next_split_s(); plus, it'd be a
fixed-size buffer, and stack allocations are negligible anyway.
This improves performance when loading any sort of XML file, especially
loading custom levels - which, on my system at least, I can noticeably
tell (there's less of a freeze when I load in to a custom level with
lots of scripts). It also decreases memory usage, because the heap isn't
being used just to iterate over some delimiters when XML files are
loaded.
Instead of checking the length() of an std::string, just check if
pText[0] is equal to '\0'.
This will have to be done anyway, because I'm going to get rid of the
std::string allocation here, and I noticed this inefficiency in the
indentation, so I'm going to remove it.
The actual unindent will be done in the next commit.
This now means every XML array loading is done with common,
re-duplicated code. The only exceptions to this are special cases other
than the the majority of cases; the majority being a simple matter of
reading an array of integers and putting it into another array.
Seems like the only reason I hadn't caught the <customlevelscore> tag
until now was because I was focused on de-duplicating all the array
loads in Game::loadstats() and below, forgetting about
Game::loadcustomlevelstats().
In order to be able to use the LOAD_ARRAY() and LOAD_ARRAY_RENAME()
macros in Game::loadcustomlevelstats(), they have to be moved to earlier
in the file.
Valgrind reported this.
The error here is that the buffer here is only guaranteed to be
initialized up until (and including) the null-terminator, by
SDL_snprintf(). Iterating over the entire allocated buffer is bad and I
should feel bad as the girl who wrote this code; doing that reads
uninitialized memory and passes it to SDL_tolower().
As a bonus, the iterator increment is now a preincrement instead of a
postincrement.
This does the same thing as the last commit, but for No Death Mode
instead of Time Trials. Whenever you die in No Death Mode, or complete
it, all the relevant variables get copied to variables prefixed with
'ndmresult' that never get reset by script.hardreset(), and these
variables are what titlerender() use, instead of the "live" ones.
This makes it so when a Time Trial gets completed, all the relevant
variables get copied onto variables prefixed with 'timetrialresult',
which never get reset by script.hardreset(). Then titlerender() will use
those variables accordingly.
There are multiple different exit paths to the main menu. In 2.2, they
all had a bunch of copy-pasted code. In 2.3 currently, most of them use
game.quittomenu(), but there are some stragglers that still use
hand-copied code.
This is a bit of a problem, because all exit paths should consistently
have FILESYSTEM_unmountassets(), as part of the 2.3 feature of per-level
custom assets. Furthermore, most (but not all) of the paths call
script.hardreset() too, and some of the stragglers don't. So there could
be something persisting through to the title screen (like a really long
flash/shake timer) that could only persist if exiting to the title
screen through those paths.
But, actually, it seems like there's a good reason for some of those to
not call script.hardreset() - namely, dying or completing No Death Mode
and completing a Time Trial presents some information onscreen that
would get reset by script.hardreset(), so I'll fix that in a later
commit.
So what I've done for this commit is found every exit path that didn't
already use game.quittomenu(), and made them use game.quittomenu(). As
well, some of them had special handling that existed on top of them
already having a corresponding entry in game.quittomenu() (but the path
would take the special handling because it never did game.quittomenu()),
so I removed that special handling as well (e.g. exiting from a custom
level used returntomenu(Menu::levellist) when quittomenu() already had
that same returntomenu()).
The menu that exiting from the level editor returns to is now handled in
game.quittomenu() as well, where the map.custommode branch now also
checks for map.custommodeforreal. Unfortunately, it seems like entering
the level editor doesn't properly initialize map.custommode, so entering
the level editor now initializes map.custommode, too.
I've also taken the music.play(6) out of game.quittomenu(), because not
all exit paths immediately play Presenting VVVVVV, so all exit paths
that DO immediately play Presenting VVVVVV now have music.play(6)
special-cased for them, which is fine enough for me.
Here is the list of all exit paths to the menu:
- Exiting through the pause menu (without glitchrunner mode)
- Exiting through the pause menu (with glitchrunner mode)
- Completing a custom level
- Completing a Time Trial
- Dying in No Death Mode
- Completing No Death Mode
- Completing an Intermission replay
- Exiting from the level editor
- Completing the main game
Comments in general don't get verified by the compiler, but
commented-out code is even worse. Especially since this looks to be
outdated code.
As always, if we need some of this code, then we can just look back in
the Git history.
During 2.3 development, there's been a gradual shift to using SDL stdlib
functions instead of libc functions, but there are still some libc
functions (or the same libc function but from the STL) in the code.
Well, this patch replaces all the rest of them in one fell swoop.
SDL's stdlib can replace most of these, but its SDL_min() and SDL_max()
are inadequate - they aren't really functions, they're more like macros
with a nasty penchant for double-evaluation. So I just made my own
VVV_min() and VVV_max() functions and placed them in Maths.h instead,
then replaced all the previous usages of min(), max(), std::min(),
std::max(), SDL_min(), and SDL_max() with VVV_min() and VVV_max().
Additionally, there's no SDL_isxdigit(), so I just implemented my own
VVV_isxdigit().
SDL has SDL_malloc() and SDL_free(), but they have some refcounting
built in to them, so in order to use them with LodePNG, I have to
replace the malloc() and free() that LodePNG uses. Which isn't too hard,
I did it in a new file called ThirdPartyDeps.c, and LodePNG is now
compiled with the LODEPNG_NO_COMPILE_ALLOCATORS definition.
Lastly, I also refactored the awful strcpy() and strcat() usages in
PLATFORM_migrateSaveData() to use SDL_snprintf() instead. I know save
migration is getting axed in 2.4, but it still bothers me to have
something like that in the codebase otherwise.
Without further ado, here is the full list of functions that the
codebase now uses:
- SDL_strlcpy() instead of strcpy()
- SDL_strlcat() instead of strcat()
- SDL_snprintf() instead of sprintf(), strcpy(), or strcat() (see above)
- VVV_min() instead of min(), std::min(), or SDL_min()
- VVV_max() instead of max(), std::max(), or SDL_max()
- VVV_isxdigit() instead of isxdigit()
- SDL_strcmp() instead of strcmp()
- SDL_strcasecmp() instead of strcasecmp() or Win32 strcmpi()
- SDL_strstr() instead of strstr()
- SDL_strlen() instead of strlen()
- SDL_sscanf() instead of sscanf()
- SDL_getenv() instead of getenv()
- SDL_malloc() instead of malloc() (replacing in LodePNG as well)
- SDL_free() instead of free() (replacing in LodePNG as well)
This variable seems to have been intended to make sure
game.savestatsandsettings() was called at the end of the frame, or make
sure that it didn't get called more than once per frame. I don't see any
frame ordering-related reason why it needs to be called specifically at
the end of the frame (the function doesn't modify any state), so it's
more plausible that it was added to make sure it didn't get called more
than one per frame.
However, upon further analysis, none of the code paths where
game.savemystats is used ever calls or sets game.savemystats more than
once, and a majority of the code directly calls
game.savestatsandsettings() anyway, so there's no reason for this
variable to exist. If we ever need to make sure it doesn't get called
more than once, and there's no way to change the code paths around to
prevent it otherwise, we can use the defer callbacks system that I added
to #535, when it gets merged.
These variables basically serve no purpose. map.customx and map.customy
are clearly never used. map.finalx and map.finaly, on the other hand,
are basically always game.roomx and game.roomy respectively if
map.finalmode is on, and if it's off, then they don't matter.
Also, there are some weird and redundant variable assignments going on
with these; most notably in map.gotoroom(), where rx/ry (local
variables) get assigned to finalx/finaly, then finalx/finaly get
assigned to game.roomx/game.roomy, then finalx/finaly get assigned to
rx/ry. If finalx/finaly made a difference, then there'd be no need to
assign finalx/finaly back to rx/ry. So it makes the code clearer to
remove these weird bits of code.
This patch cleans up unnecessary exports from header files (there were
only a few), as well as adds the static keyword to all symbols that
aren't exported and are specific to a file. This helps the linker out in
not doing any unnecessary work, speeding it up and avoiding silent
symbol conflicts (otherwise two symbols with the same name (and
type/signature in C++) would quietly resolve as okay by the linker).
When gamemode(teleporter) gets run in a script, it brings up a read-only
version of the teleporter screen, intended only for displaying rooms on
the minimap.
However, ever since 2.3 allowed bringing up the map screen during
cutscenes (in order to prevent softlocks), bringing up the map screen
during this mode would (1) do an unnecessary animation of suddenly
switching back to the game and bringing up the menu screen again (even
though the menu screen has already been brought up), and (2) would let
you close the menu entirely and go back to GAMEMODE, thus
unintentionally closing the teleporter screen and kind of ruining the
cutscene.
To fix this, when you bring up the map screen, it will instead instantly
transition to the map screen. And when you bring it down, it will also
instantly transition back to the teleporter screen.
But that's not all. The previous behavior was actually kind of a nice
failsafe, in that if you somehow got stuck in a state where a script ran
gamemode(teleporter), but stopped running before it could take you out
of that mode by running gamemode(game), then you could return to
GAMEMODE yourself by bringing up the map screen and then bringing it
back down. So I've made sure to keep that failsafe behavior, only as
long as there isn't a script running.
When bringing up the map screen, the game does a small menu animation
where the menu comes in from the bottom. The code to calculate the menu
offset is copy-pasted everywhere, so I thought I'd de-duplicate it to
make my life easier when working with it. I also included the
game.gamestate assignment in the de-duplicated function, so it would be
easier for a future bugfix.
At the same time, I'm also removing all the BlitSurfaceStandard()s that
copied menubuffer to backBuffer. The red flag is that this blit happened
for every single entry point to MAPMODE and TELEPORTERMODE, except for
the script command gamemode(teleporter). Pressing Enter to bring up the
map screen, pressing Enter to quit the Super Gravitron, pressing Esc to
bring up the pause screen, and pressing Enter to bring up the teleporter
screen all do this blit, so if this blit was there to fix a bug, then
there's a bug with using the script command gamemode(teleporter)... but,
as far as I can tell, there isn't.
That's because the blit basically does nothing. All the blit does is
copy menubuffer onto backBuffer. Then the next thing that happens is
that either maprender() or teleporterrender() will be called, and the
first thing that those functions will always do is fill backBuffer with
solid black, completely overriding the previous blit. So that's why
removing this blit won't have any effect, and it can be safely removed
for code clarity.
To fix this bug, all we have to do is just pass the existing
ScreenSettings* that we have in loadstats() to savestats(), and in
loadsettings() to savesettings().
Fixes#556. Depends on #558.
Another step to fix the bug #556 is to allow Game::savestats() to accept
a pointer to an existing ScreenSettings struct. This entails refactoring
Game::savesettings() and Game::serializesettings() to accept the
function as well, along with adding Screen::GetSettings() so the
settings of the current Screen can be easily grabbed.
In order to be able to fix the bug #556, I'm planning on adding
ScreenSettings* to the settings.vvv write function. However, that
entails adding another argument to Game::savesettings(), which is going
to be really messy given the default argument of Game::savestats().
That, combined with the fact that the code comment at the site of the
implementation of Game::savestats() being wrong (!!!), leads me to
believe that using default function arguments here isn't worth it.
Instead, what I've done is made it so callers are explicit about whether
or not they're calling savestats(), savesettings(), or both at the same
time. If they are calling both at the same time, then they will be using
a new function named savestatsandsettings().
In short, these are the interface changes:
* bool Game::savestats(bool) has been removed
* bool Game::savestatsandsettings() has been added
* void Game::savestats_menu() has been renamed to
void Game::savestatsandsettings_menu()
* All previous callers of bool Game::savestats() are now using bool
Game::savestatsandsettings()
* The one caller of bool Game::savestats(bool) is now using bool
Game::savestats()
`success = success && savesettings();` is now changed to
`success &= savesettings();`. It's bitwise, and I think C++ should have
had a &&= for completeness, but it shouldn't matter here.
Changing settings would most of the time attempt to save unlock.vvv and
now also settings.vvv, but there would be no feedback whether the files
have been saved successfully or not. Now, if saving fails when changing
settings in the menu, a warning message will be shown. The setting will
still be applied of course, but the user will be informed it couldn't
be saved. This message can be silenced until the game is restarted,
because I can imagine this could get very annoying when someone already
knows their settings aren't writeable.
Also, some options didn't even save settings in the first place. These
are turning off invincibility, and by coincidence precisely all the
options in the advanced options menu. I made sure these options now do
so.
It wasn't a direct duplicate of key.sensitivity, but it was still
basically the same thing. Although to be fair, at least the case-switch
conversion didn't get duplicated everywhere unlike game.slowdown.
So now key.sensitivity functions the same as game.controllerSensitivity,
and it only gets converted to its actual value whenever a joystick input
happens in key.Poll(), unlike previously where it got converted every
single frame on the title screen (there was even a comment that said
"TODO bit wasteful doing this every poll").
game.gameframerate seems to exist for converting the value of
game.slowdown into an actual timestep value, when really the timestep
value should just use game.slowdown directly with a fast lookup table.
Otherwise, there's a bunch of duplicated game.slowdown case-switches
everywhere, which adds up to a large, annoying pile should the values be
changed in the future. But now the duplicate variable has been removed,
and with it, all the copy-pasted case-switches.
Also, the game speed text rendering in Menu::accessibility and
Menu::setslowdown has been factored out to a function and de-duplicated
as well.
There were some duplicate Screen configuration variables that were on
Game, when there didn't need to be.
- game.fullScreenEffect_badSignal is a duplicate of
graphics.screenbuffer->badSignalEffect
- game.fullscreen is a duplicate of !graphics.screenbuffer->isWindowed
- game.stretchMode is a duplicate of graphics.screenbuffer->stretchMode
- game.useLinearFilter is a duplicate of
graphics.screenbuffer->isFiltered
These duplicate variables have been removed now.
I put indentation when handling the ScreenSettings struct in main() so
the local doesn't live for the entirety of main() (which is the entirety
of the program).
Assigning these variables is now wholly unnecessary ever since #522 got
merged, and in fact setting graphics.backgrounddrawn to false actually
causes the warp background to "skip" when the map screen gets closed. So
this fixes that bug, too.
This kludge variable was used to re-set the warp background after coming
back from the in-game settings menus. But since #522 got merged, this
has no longer been necessary.
The game previously did this dumb thing where it lumped in all its
settings with its file that tracked your records and unlocks,
`unlock.vvv`. It wasn't really an issue, until 2.3 came along and added
a few settings, suddenly making a problem where 2.3 settings would be
reset by chance if you decided to touch 2.2.
The solution to this is to move all settings to a new file,
`settings.vvv`. However, for compatibility with 2.2, settings will still
be written to `unlock.vvv`.
The game will prioritize reading from `settings.vvv` instead of
`unlock.vvv`, so if there's a setting that's missing from `unlock.vvv`,
no worries there. But if `settings.vvv` is missing, then it'll read
settings from `unlock.vvv`. As well, if `unlock.vvv` is missing, then
`settings.vvv` will be read from instead (I explicitly tested for this,
and found that I had to write special code to handle this case,
otherwise the game would overwrite the existing `settings.vvv` before
reading from it; kids, make sure to always test your code!).
Closes#373 fully.
Whenever you delete all your save data, your settings aren't changed at
all, and you could resave them if you fiddled with a setting somewhere.
But the full game doesn't count Flip Mode as a setting, instead it
counts it as an unlock. This means deleting your save data would unset
Flip Mode in M&P, which would seem weird because in M&P it's just a
simple setting.
For consistency, Flip Mode shouldn't be unset when deleting save data in
M&P.
When I encountered this function, I asked myself, why make a dedicated
function instead of casting to int?
Well, as it turns out, you can't just cast to int, because you have to
convert it to a string by doing help.String(number).c_str(), like all
the other ints. So it's actually more wasteful to do it the normal way
instead of using BoolToString().
That is, until my recent changes came along and made it so that you can
just provide an int and it'll automatically be converted to a string, no
questions asked. Now, it's more optimal to do a straight cast to int
instead of having to go through a middleman function. So this function
is getting axed in favor of casting to int instead.
This file is probably the biggest one, as there will be more settings
added in the future and we don't want people's settings to be erased. Of
course, this file will be migrated to a settings.vvv sometime later in
2.3 in order to prevent 2.2 from erasing 2.3 settings.
