If you have invincibility enabled and push the camera, the background
would smear. This is because the game doesn't calculate the proper
bscroll and bypos of the tower background, and also doesn't end up
redrawing it.
We do both these things now, so this is fixed.
These places didn't assign map.oldypos when they assigned map.ypos. This
could have only resulted in visual glitches, but it's good to be
consistent and proactively fix these.
This fixes issues where they would be silent for 1 frame due to frame
ordering, resulting in a weird-sounding beginning of these tracks due to
a lack of attack (in the musical sense).
This is similar to the issue where tracks fading in would suddenly be
loud for 1 frame, again due to frame ordering.
This fixes issues with music playing, only for it to fade out
afterwards. This happened if tracks 0 or 7 were played after fading out,
because playing other tracks reset the fade booleans (by calling a
fade-in), but not tracks 0 or 7.
The previous fade system used only one variable, the amount of volume to
fade per frame. However, this variable was an integer, meaning any
decimal portion would be truncated, and would lead to a longer fade
duration than intended.
The fade per volume is calculated by doing MIX_MAX_VOLUME / (fade_ms /
game.get_timestep()). MIX_MAX_VOLUME is 128, and game.get_timestep() is
usually 34, so a 3000 millisecond fade would be calculated as 128 /
(3000 / 34). 3000 / 34 is 88.235..., but that gets truncated to 88, and
then 128 / 88 becomes 1.454545..., which then gets truncated to 1. This
essentially means 1 is added to or subtracted from the volume every
frame, and given that the max volume is 128, this means that the fade
lasts for 128 frames. Now, instead of the fade duration lasting 3
seconds, the fade now lasts for 128 frames, which is 128 * 34 / 1000 =
4.352 seconds long.
This could be fixed using floats, but when you introduce floats, you now
have 1.9999998 problems. For instance, I'm concerned about
floating-point determinism issues.
What I've done instead is switch the system to use four different
variables instead: the start volume, the end volume, the total duration,
and the duration completed so far (called the "step"). For every frame,
the game interpolates which value should be used based on the step, the
total duration, and the start and end volumes, and then adds the
timestep to the step. This way, fades will be correctly timed, and we
don't have potential determinism issues.
Doing this also fixes inaccuracies with the game timestep changing
during the fade, since the timestep is only used in the calculation
once at the beginning in the previous system.
To exclude gravitron squares, the game excluded all entities whose
`size` was 12 or higher. The `size` of the player when they transform
into VVVVVV-Man is 13.
We have already inadvertently fixed VVVVVV-Man not warping vertically in
2.2. This was done with the previous room transition/warping code
refactors; the gravitron square conditionals were simply excluded from
the vertical warp code, because there's no situation where there would
ever be a gravitron square outside the screen vertically.
As with making rescuable crewmates warpable, I have yet to ever see
people use VVVVVV-Man in a custom level. It's not like they would want
to use it anyway; VVVVVV-Man is really, really buggy. And it's probably
better to make it less buggy, starting with this commit.
That being said, VVVVVV-Man's collision when warping horizontally is
really janky, so I still wouldn't use it.
The game excluded every entity whose `type` was 50 or higher. The `type`
of rescuable crewmates is 55.
Could some levels be broken by this behavior? Unlikely; without warping,
the crewmates would end up falling out of the room and would become
unrescuable. So this is more likely to fix than to break.
But more importantly, *no one knows that rescuable crewmates don't
warp*. If anyone would know, it would be me, because I've been in the
custom levels community for over 7 years - and yet, during that time, I
have not seen anyone run into this corner case. If they did, I would
remember! This implies that people simply have never thought about
putting rescuable crewmates in places where they would warp - or they
have, ran into this issue, and worked around it.
With those two reasons, I'm comfortable fixing this inconsistency.
This saves one indentation level. I also fixed the comments a bit
(multiline instead of single-line, "gravitron squares" instead of "SWN
enemies", also commented the player exclusion from horizontal wrapping
in vertically-wrapping rooms).
This fixes a bug where using the fullscreen toggle keybind (Alt+Enter,
Alt+F, or F11) wouldn't update the color of the "resize to nearest" menu
option. The color doesn't functionally change anything - the option
still won't work, and will still have the message telling you that you
need to be in windowed mode when you move your menu selection to it -
but it's an easy inconsistency to fix; just move the menu recreation in
to Screen::toggleFullScreen() itself.
The game dereferences graphics.screenbuffer without checking it first...
it's unlikely to happen, but the least we can to do be safe is to add a
check and assert here.
If there were two scripts with the same name, removing one of them would
only remove the other script from the script name list, and not also
remove the contents of said script - leading to a desync in state, which
is probably bad.
Fixing this isn't as simple as removing the break statement - I either
also have to decrement the loop variable when removing the script, or
iterate backwards. I chose to iterate backwards here because it
relocates less memory than iterating forwards.
No need to use it when good ol' loops work just fine.
Iterating backwards is correct here, in case there happen to be more
than one of the item in the vectors, and also to minimize the amount of
memory that needs to be relocated.
This is a simple change - we draw minimap.png, instead of the generated
custom map, if it is a per-level mounted custom asset.
Custom levels have already been able to utilize minimap.png, but it was
limited - they could do gamemode(teleporter) in a script, and that would
show their customized minimap.png, but it's not like the player could
look at it during gameplay.
I would have done this earlier if I had figured out how to check if a
specific asset was mounted or not.
Previously, if the game couldn't set the write dir to the base
directory, or couldn't make the base directory, or couldn't calculate
the base directory, it would probably dereference NULL or read from
uninitialized memory or murder your family or something. But now, I've
eliminated the potential Undefined Behavior from the code dealing with
the base path.
Previously, this function had a bug due to failing to account for array
decay. My solution was to just repeat the MAX_PATH again. But in
hindsight I realize that's bad because it hardcodes it, and introduces
the opportunity for an error where we update the size of the original
path but not the size in the function.
So instead, just pass the size through to the function.
I don't want to add too many asserts, because sometimes it's okay if a
file is missing (mmmmmm.vvv). But currently, the game basically expects
all images and sound effects to be present. That might change in the
future, but for now, these asserts are okay.
FILESYSTEM_loadFileToMemory() dereferenced pointers without checking if
they were valid... I don't know of any cases where they could have been
NULL, but better safe than sorry.
So, the codebase was kind of undecided about who is responsible for
initializing the parameters passed to FILESYSTEM_loadFileToMemory() - is
it the caller? Is it FILESYSTEM_loadFileToMemory()? Sometimes callers
would initialize one variable but not the other, and it was always a
toss-up whether or not FILESYSTEM_loadFileToMemory() would end up
initializing everything in the end.
All of this is to say that the game dereferences an uninitialized
pointer if it can't load a sound effect. Which is bad. Now, I could
either fix that single case, or fix every case. Judging by the title of
this commit, you can infer that I decided to fix every case - fixing
every case means not just all cases that currently exist (which, as far
as I know, is only the sound effect one), but all cases that could exist
in the future.
So, FILESYSTEM_loadFileToMemory() is now guaranteed to initialize its
parameters even if the file fails to be loaded. This is better than
passing the responsibility to the caller anyway, because if the caller
initialized it, then that would be wasted work if the file succeeds
anyway because FILESYSTEM_loadFileToMemory() will overwrite it, and if
the file fails to load, well that's when the variables get initialized
anyway.
My next commit will involve using goto to jump to the end of a function
to initialize the variables to NULL, but that results in a compiler
error if we have initializations in the middle of the function. We might
as well put all declarations at the top of each block anyway, to help
the move to C, so I'm doing this now.
Since the length variable in the STDIN block now overshadows the length
variable in the outer block, I've renamed the length variable in the
block to stdin_length.
These casts are sprinkled all throughout the graphics code when creating
and initializing an SDL_Rect on the same line. Unfortunately, most of
these are unnecessary, and at worst are wasteful because they result in
narrowing a 4-byte integer into a 2-byte one when they don't need to
(SDL_Rects are made up of 4-byte integers).
Now, removing them reveals why they were placed there in the first place
- a warning is raised (-Wnarrowing) that implicit narrowing conversions
are prohibited in initializer lists in C++11. (Notably, if the
conversion wasn't narrowing, or implicit, or done in an initializer
list, it would be fine. This is a really specific prohibition that
doesn't apply if any of its sub-cases are true.)
We don't use C++11, but this warning can be easily vanquished by a
simple explicit cast to int (similar to the error of implicitly
converting void* to any other pointer in C++, which works just fine in
C), and we only need to do it when the warning is raised (not every
single time we make an SDL_Rect), so there we go.
This fixes a bug where after loading in to the level editor, pressing
Esc and then switching your option to something other than the first
option, then pressing Esc again to close the menu, then pressing Esc
once more would not keep your menu option.
This is because the code that checks if Menu::ed_settings is already in
the stack doesn't account for if ed_settings is the current menu - the
current menu doesn't get put in to the stack.
In hindsight, maybe I could have designed the new menu system better so
the current menu IS on the stack, and/or should have used a
statically-allocated linked list for each menu name for the stack frames
(instead of an std::vector) and asserted if a menu that already existed
in the stack was created instead... that'll have to be done later,
though.
Pressing Esc to cancel the confirm quit menu didn't play the squeak, in
contrast to pressing ACTION to cancel it, so now it does; pressing Esc
to close the pause menu or pressing ACTION will also now play the
Viridian squeak too.
vx/vy mean x-velocity and y-velocity... except here, where it seems like
they're used as extra parameters that do different things depending on
the entity. But it seems like at one point they were actually meant to
be the speed of the entity (this is the case for the unused decorative
particle entities), and then just never got renamed when they weren't.
The custom levels community named these two parameters meta1 and meta2
in the reference list of entities for the createentity() script command,
so that's what I'm naming them here. This will avoid confusion (I know
that some people reading this function have genuinely mistaken the vx/vy
for actually meaning x-velocity and y-velocity, simply because they were
named that way).
I have spelled out each overloaded version instead, and only the
overloads that are actually used - which just happens to be everything
except the 8-argument one. I don't want to deal with callers right now
(there are too many of them), so I'm not going to change the names that
the callers use, nor do I want to change the amount of arguments any
existing callers use right now - but we will have to deal with them in
one way or another when we move to C.
The script command createentity() is always an int. But not only that,
every time createentity() is used, its arguments are always treated like
ints. Always. I knew that vx/vy were floats because of the int casts in
the function, but I didn't even realize that xp/yp were floats, too,
until I checked just now! That's how much they're treated like ints.
All int casts in createentity() have also been removed, due to being
unnecessary (either because of us suppressing MSVC implicit conversion
warnings, or because there are now no longer any conversions happening).
This boolean is assigned, and it is checked... but it's never assigned
to true, thus making it useless. I also checked 2.2 source and the same
thing happens there; to prevent any confusion, I'm removing this.
So... I did see that map.ypos was a float when I added over-30-FPS mode,
because map.oldypos wasn't there before... I'm guessing that I kind of
just ignored it at the time. But, c'mon, map.ypos and map.oldypos are
always treated as ints, so there's literally no reason for them to be
actually floats in reality. I didn't even know they were anything other
than ints until I checked Map.h.
This is quite simple - whenever the user uses their keyboard or
controller, we hide the mouse cursor. Whenever they move the mouse, we
show it again. This makes it so the cursor gets out of the way when they
play the game, but reappears when they need it.
There is also a timeout, to prevent strobing if the user decides to use
the keyboard/controller and mouse at the same time. There is no timeout
from hiding the mouse cursor, but there is a timeout from showing the
mouse cursor - this because it's okay if the mouse lingers for a few
frames when you start using the keyboard, but really annoying if the
mouse doesn't instantly appear when you move it.
The config option has been removed. I'm going to implement something
that automatically shows and hides the mouse cursor whenever
appropriate, which is better than a config option.
These are two C++ features that we don't need, don't use, and will never
use in the future. Apparently the best way of doing this in CMake is to
fiddle with the CXX_FLAGS using regex.
Now this is one less flag I need to supply myself when I invoke CMake...
This variable is not defined anywhere and never has been since the
source code release (which is when this CMake file was first created).
To make things clearer, I'm cleaning this variable up.
A function like add_definitions() adds definitions to ALL targets, not
just VVVVVV. This kind of namespace pollution is messy, and could result
in bugs if you pollute with the right kind of pollutant.
So instead of using add_definitions(), use target_compile_definitions().
And instead of using include_directories(), use
target_include_directories().
All the C third-party dependencies are C90, and all the C files we have
are also C90 (well, almost, but that's easily sorted). So we have
basically no reason to not go with C90 here.
The only wrinkle is, turning C extensions off for physfs-static results
in linker errors because PhysFS implicitly uses alloca() without
including it properly (on Linux). I am not the only one who has ran into
this - see https://icculus.org/pipermail/physfs/2020-April/001293.html -
and it's a bug with PhysFS. The workaround I've gone with is to enable C
extensions. (There might also be some funkiness with PhysFS's use of the
`inline` keyword, so enabling extensions will paper over that as well.)
So there were actually only two instances of C99-style end-of-line
comments in C files - and technically one of them was just a C file
including MakeAndPlay.h.
It seems like CMake 3.1.3 introduced the C/C++ standard properties,
while the minimum version of this CMake file is 2.8.12. So we do what
FAudio does, which is print a warning if the CMake version is too old
and otherwise use it if we have the feature.
They're the same thing, but using option() better conveys intent.
However this can't be done for anything that isn't a bool, which the
CUSTOM_LEVEL_SUPPORT option is not (it's a tri-state string).
These were introduced in 098fb77611 - did
Leo not know that they were already there at the top of the file? This
does the same thing, except it only sets it for VVVVVV instead of
everything (so this wouldn't set it for the third-party dependencies).
