When editorclass::reset() was resetting the contents of the level
previously, it was mixing up the X and Y bounds. The Y bound was
supposed to be 30*maxheight, and the X bound was supposed to be
40*maxwidth. Instead, it took 30*maxwidth as its Y bound and
40*maxheight as its X bound.
Then, when it actually indexes the contents vector to set each tile to
0, it used 30*maxwidth instead of 40*maxwidth.
The difference between width and height is a bit hard to spot, but one
thing you can do to remember the difference is to remember the fact that
X corresponds with width, and Y corresponds with height. Also, rooms are
40 by 30 tiles, and so X (and therefore width) should correspond with
40, and Y (and therefore height) should correspond with 30.
As a result of mixing up the variables, whenever you played a 20x20 map,
quit the level and then started making a new 20x20 map, the tiles of the
last four rows of the previous map would persist, from y=16 (1-indexed)
all the way to y=20 (1-indexed).
I don't recall anyone ever running into this bug before, which is a bit
strange. But if no one truly has ever ran into this bug before, then I'm
genuinely surprised.
While working on the patch to fix the enemy type room property of each
room not getting reset, and testing the fix, I noticed that for some
reason some contents of the previous level I played in order to test the
enemy type property persisting was ALSO persisting alongside the enemy
type property.
Then I read the code and when I realized that the X and Y bounds were
getting mixed up I groaned. Very loudly.
This fixes a bug where if you loaded a level, then started making a new
level in the editor, the enemy types from the previous level would
persist.
While working on VVVVVV: Community Edition and adding a new room
property for enemy speed, I noticed that enemy type was not getting
reset at all. After some testing, I confirmed that this was the case. So
this bug is fixed now.
This fixes a bug where you could get mismatched text and background
colors on the menu screen by being in the Tower and exiting at a certain
time. The background when mismatched will always be red, which seems to
have something to do with the fact that when you enter the Tower the
game always sets the background to be red. I could get a quick repro
setup going by starting in the checkpoint in Teleporter Divot, then
quickly entering the Tower, exiting, then re-entering, then pressing Esc
and quitting - all done very quickly.
The important thing about this mismatch is that it's only temporary, and
will be corrected when you press ACTION and the color of the text and
background in the menu both change at the same time, which is what
map.nexttowercolour() does. So all I do is simply call that function
when exiting to the menu, and it will fix the color mismatch.
Earlier in 53950e14de65a54d9369c5183a16337782d3dc4e, I made playing a
song while a song was already fading quickly fade out the current song,
but then added an exception for if the fade came from the musicfadeout()
command. This commit adds another exception for if the fade came from
niceplay(), since otherwise the music transitions between areas in the
game would go too quick.
This fixes an issue where you could softlock the game if you exited
playtesting mode by pressing Esc while a "- Press ACTION to advance text
-" prompt was onscreen, then re-entered playtesting and then started any
script.
The "- Press ACTION to advance text -" prompt is most directly
controlled by game.advancetext, but when it appears game.pausescript is
usually set as well. You need to have both variables on at the same time
in order to press ACTION. If only advancetext is on, then you won't be
able to flip but can still move around, but if only pausescript is on,
then the game softlocks because the only way you can turn pausescript
off is by pressing ACTION, but the game will only let you press ACTION
if *both* advancetext and pausescript are on.
This fixes a bug where bringing up the pause screen while in a tower
would draw the room you entered BEFORE the tower during the time it took
for the pause screen to be brought up or down.
This fixes a bug in the editor where if you had cutscene bars active
while exiting playtesting, when you re-entered playtesting, the bars
would do their closing animation even though they should be already
gone.
Out-of-bounds array access is Undefined Behavior, which means Bad
Things.
In this particular case, it was indexing an array by using the
`testeditor` variable. Which is fine, except it was indexing that array
*in a conditional that only happens if `testeditor` is -1*. So it was
indexing an array at position -1, which is Out of Bounds and is Not
Good.
For a long time, VVVVVV has had an issue where if you used custom
graphics with translucent pixels (i.e. pixels whose opacity was neither
0% nor 100%, but somewhere between 0% and 100%), those pixels would end
up looking very ugly. They seemed to be overlaid on top of some weird
blue color, instead of actually being translucent.
This bug only occurred when in-game and not in towermode. So, most of
the time, basically. The translucent pixels only displayed properly
inside the Tower, both minitowers, and the editor (when not
playtesting).
I traced this down to the use of the magic number 0xDEADBEEF in
Graphics::drawmap() and Graphics::drawfinalmap(). Looks like someone had
fun finding a color. Was it you, simoroth? Anyway, I've changed it so it
simply uses 0 instead. Note that this magic number needs to be changed
for BOTH FillRect() and OverlaySurfaceKeyed(), or else the game's
background will be some random solid color instead of actually being
drawn properly.
There's a long-standing issue where the Direct Mode status of the loaded
custom map in memory never resets properly. So if you load a level with
a certain layout of Direct Mode rooms, that same layout will be
preserved if you start making a new level in the editor. This commit
fixes that issue.
Similar to 2ebccbc3e9, there's also a
long-standing bug where if you backspace an empty line (and this time,
the line IS actually already empty, not merely
emptied-earlier-in-the-frame), the game will quickly delete more blank
lines if there are any above the blank line you deleted. Again, this is
annoying too, if you so happen to need to use lots of blank lines.
To fix this, it's simple - just set ed.keydelay to 6 when the game
backspaces an empty line. Then it won't be so trigger-happy in deleting
blank lines.
There is a long-standing bug with the script editor where if you delete
the last character of a line, it IMMEDIATELY deletes the line you're on,
and then moves your cursor back to the previous line. This is annoying,
to say the least.
The reason for this is that, in the sequence of events that happens in
one frame (known as frame ordering), the code that backspaces one
character from the line when you press Backspace is ran BEFORE the code
to remove an empty line if you backspace it is ran. The former is
located in key.Poll(), and the latter is located in editorinput().
Thus, when you press Backspace, the game first runs key.Poll(), sees
that you've pressed Backspace, and dutifully removes the last character
from a line. The line is now empty. Then, when the game gets around to
the "Are you pressing Backspace on an empty line?" check in
editorinput(), it thinks that you're pressing Backspace on an empty
line, and then does the usual line-removing stuff.
And actually, when it does the check in editorinput(), it ACTUALLY asks
"Are you pressing Backspace on THIS frame and was the line empty LAST
frame?" because it's checking against its own copy of the input buffer,
before copying the input buffer to its own local copy. So the problem
only happens if you press and hold Backspace for more than 1 frame.
It's a small consolation prize for this annoyance, getting to
tap-tap-tap Backspace in the hopes that you only press it for 1 frame,
while in the middle of something more important to do like, oh I don't
know, writing a script.
So there are two potential solutions here:
(1) Just change the frame ordering around.
This is risky to say the least, because I'm not sure what behavior
depends on exactly which frame order. It's not like it's key.Poll()
and then IMMEDIATELY afterwards editorinput() is run, it's more
like key.Poll(), some things that obviously depend on key.Poll()
running before them, and THEN editorinput(). Also, editorinput() is
only one possible thing that could be ran afterwards, on the next
frame we could be running something else entirely instead.
(2) Add a kludge variable to signal when the line is ALREADY empty so
the game doesn't re-check the already-empty line and conclude that
you're already immediately backspacing an empty line.
I went with (2) for this commit, and I've added the kludge variable
key.linealreadyemptykludge.
However, that by itself isn't enough to fix it. It only adds about a
frame or so of delay before the game goes right back to saying "Oh,
you're ALREADY somehow pressing backspace again? I'll just delete this
line real quick" and the behavior is basically the same as before,
except now you have to hit Backspace for TWO frames or less instead of
one in order to not have it happen.
What we need is to have a delay set as well, when the game deletes the
last line of a char. So I set ed.keydelay to 6 as well if editorinput()
sses that key.linealreadyemptykludge is on.
For a long time, the script editor has had a bug where it would let you
put the cursor on a nonexistent script line, which would APPEAR to be
the last line of the script... but in reality, it WASN'T the last line
of the script, and in fact, the ACTUAL last line was the line ABOVE the
script.
So, if you typed anything on this nonexistent line, it would appear to
get erased when exiting the script. Thus, people have (erroneously)
misdiagnosed this as the script editor somehow being trigger-happy and
erasing lines when it shouldn't be, when in reality it should've have
let you gone onto that line in the first place!
Hiding the mouse cursor does makes sense in a lot of situations I agree, but it's very much a preference thing, and I don't see a good reason to change the original behavour. Some people (i.e. me) don't like cursors disappearing in windowed mode when you move the cursor over the screen, but most importantly, it makes the editor much less pleasant to use (since you're relying on the 30fps editor cursor box).
I'd be happy to support, say, a setting that allowed you to disable the mouse cursor, or even a 15 second time-out which makes the cursor disappear if not moved (and reappear once moved), but just having it off by default feels wrong to me.
Yikes. Somebody brought this to my attention, I didn't even remember that I'd written it. "Spa" or "Spastic" is kind of a south park esque slang term that used to be pretty common in Ireland, which I used without even thinking about it. It's definitely not something I would say anymore, 10 years on, and it's something I shouldn't have said at the time either. I'm sorry :(
(somebody on twitter was asking me about how much cleaning up of the source code I did before launching this. I think this commit kinda answers that)
* Add entity type attribute checks to getcrewman()
This means that the game is no longer able to target other non-crewmate
entities when it looks for a crewmate.
This has actually happened in practice. A command like
position(cyan,above) could position the text box above a horizontal warp
line instead of the intended crewmate.
This is because getcrewman() previously only checked the rule attributes
of entities, and if their rule happened to be 6 or 7. Usually this
corresponds with crewmates being unflipped or flipped, respectively.
But warp lines' rules overlap with rules 6 and 7. If a warp line is
vertical, its rule is 5, and if it is horizontal, its rule is 7.
Now, usually, this wouldn't be an issue, but getcrewman() does a color
check as well. And for cyan, that is color 0. However, if an entity
doesn't use a color, it just defaults to color 0. So, getcrewman() found
an entity with a rule of 7 and a color of 0. This must mean it's a cyan
crewmate! But, well, it's actually just a horizontal warp line.
This commit prevents the above from happening.
If you're in the room being targeted when a `warpdir()` command is run,
and it sets the warp direction to none (warp dir 0), and if you're in a
Lab or Warp Zone room, the background will be set to the wrong one,
because it will always set the background to the stars-going-left
background, instead of setting it to the Lab background or the
stars-going-up background.
However, this is only a visual glitch, and is a temporary one, because
if you manage to trigger a `gotoroom()` on the room, it will get set to
its proper background.
This commit makes it so if you're in a Lab room, the background gets set
to the Lab background, and if you're in a Warp Zone room, the background
gets set to the stars-going-up background.
There are three map-related vectors that need to be reset in hardreset:
`map.roomdeaths`, `map.roomdeathsfinal`, and `map.explored`. All three
of these vectors use the concatenated rows system, whereby each room is
given a room number, calculated by doing X + Y*20, and this becomes
their index in each vector.
There's a double-nested for-loop to handle resetting all of these, where
the outer for-loop iterates over the Y-axis and the inner for-loop
iterates over the X-axis, but only `map.explored` is properly reset.
That's because it's the only vector that properly indexes using X +
Y*20. The other vectors reset using X, so previously, only the first row
of `map.roomdeaths` and `map.roomdeathsfinal` got reset, corresponding
with only the first row of rooms in both Dimension VVVVVV and Outside
Dimension VVVVVV getting reset.
This commit makes sure that both get reset properly.
There are two main problems with flipgravity():
1. It doesn't work for an already-flipped crewmate.
2. It doesn't work on the player.
This commit addresses both of those issues.
