In-game because that's where screen effects are used the most. But on
the title screen, screen effects are used when you press ACTION to start
the game, and when you enable screen effects, too.
Otherwise, we don't need screen effects for any other game-gamestate.
This de-duplicates the screen effects rendering code by putting it
inside a function, Graphics::renderwithscreeneffects(), and using that
instead of copy-pasted code.
The code to decrement the timers for flashing and shaking is now handled
outside the game-gamestate case-switch, instead of having to be
duplicated inside each render function.
As a bonus, I made it so the timer decrements even if screen effects are
disabled. This is to prevent any theoretical situation where the timer
can "pile up" due to disabled screen effects not letting it tick down.
This removes a lot of duplicate code, which towerrender() mostly
consisted of, even though the only difference is that it draws a
separate map and screen edge spikes are drawn.
This removes lots of duplicated code that drawtowerentities() did,
because all that really changed was accounting for map.ypos (which can
be done conditionally) and where and when the room wrapped (which can
also be done conditionally).
This fixes an oddity that's only visual, which could only happen in
custom levels by using the createentity() internal command.
For the same reason that the second through fourth tiles of moving
platforms on the top and left was buggily rendered, SDL_BlitSurface()
strikes again to mutate the SDL_Rect we pass it and render the next
SDL_BlitSurface() call inbounds, even though we don't need it to.
Previously, the game could end up rendering a warping sprite twice due
to the fact that it could run "if entity is on the right side of the
screen" right after "if entity is on the left side of the screen" (but
not the other way around). This is most noticeable if you have a custom
player sprite with translucent pixels and stand on the left side of a
warping screen, but the code suggests it happens when warping through
the top of the screen, too.
Instead of doing
if (!obj.entities[i].invis)
{
...
}
It's better to do
if (obj.entities[i].invis)
{
continue;
}
...
It reduces the indentation by one level, which is always a good thing.
In the last commit, I removed having the flip mode conditional directly
inside the sprite-drawing code for each size type, which would reduce
the indentation one level. However, I opted to hold off un-indenting
until this commit, otherwise it would've produced too much noise.
The game uses flipsprites.png instead of sprites.png when in flip mode,
mostly to add exceptions for sprites that SHOULDN'T be flipped in flip
mode.
Looks like to achieve this, the routines for sprite drawing got
copy-and-pasted every single time flipsprites.png needed to be
conditionally used, resulting in large amounts of copy-pasted code. And
this copy-pasted code resulted in copy-paste errors, with relating to
VVVVVV-Man, because apparently due to two copy-pasting errors, the
combined giant crewmate in the epilogue uses flipsprites.png even if you
aren't in flip mode, and it also uses the width instead of the height of
sprites_rect when in flip mode (although, this doesn't end up mattering,
but still).
The solution here is to simply change the referenced sprites vector to a
pointer that can conditionally change based on the game being in flip
mode or not.
Looks like I forgot to test that my music silencing patch didn't break
the music being silent during the "You have found a shiny trinket" and
"You have found a shiny crewmate" text boxes. So I've added a check for
game.completestop in the music handling in main.cpp.
Found this bug while I was testing my towerlogic/gamelogic merge patch.
The problem here is that we're directly using the C stdio library,
instead of using PHYSFS's stuff. So I've added a function
FILESYSTEM_delete() that does exactly that.
This commit fixes a slightly frustrating thing where if you start a new
game, and then exit before saving, "start game" will always take you to
a new game, even though you have unlocked things like the Secret Lab or
Time Trials.
Now, if you select "new game" (only possible if you have something
unlocked), then quit before saving, "start game" will still take you to
the play menu, but "continue" is replaced with "start" and "new game" is
gone.
This will be a useful shorthand to ask "do we have the Secret Lab, or
any Time Trial, or Intermission replays, or No Death Mode, or Flip Mode
unlocked?"
This fixes being able to rack up a large amount of stack frames by
pressing Esc repeatedly in the editor, which would be a problem if you
were to then return to the main menu afterwards.
Instead, if Menu::ed_settings is already in the stack, the game will
simply return to that menu instead of creating it. Else, it will just
create the menu.
Also, as extra attention to detail, I made sure that the menu create or
return only happens if Esc opens the settings menu, and not when Esc is
closes it.
This stabilizes the code that handles the menu that you land on if you
press Esc and quit to the menu.
Instead of using Game::returnmenu(), we now use the new function
Game::returntomenu() to clearly express intent that we want to return to
a specific menu. So I've added another kludge variable
Game::wasinintermission for the was-in-intermission case.
Also, I made it so that if you didn't have a main game telesave or
quicksave, you just get brought back to the main menu. Because you
shouldn't be able to go to the play menu without a quicksave or
telesave.
When exiting from a game-gamestate which may have been entered through a
varying amount of menus, the solution is to not use Game::returnmenu(),
and to instead have a way to go back to a certain given menu.
This commit fixes a bug where the second, third, and fourth tiles of
moving platforms would render offset from the first tile if the moving
platform hit the top or left edge of the screen.
This is due to the fact that SDL_BlitSurface() will end up changing the
coordinates of the rectangle we pass to it to be 0 if they're negative,
but only after it's already been drawn. Previously, we kept re-using the
same rectangle each time we drew each segment of the moving platform,
but since it only changes the draw rectangle after it's already been
drawn, the first tile shows up fine, but not the rest of the tiles,
hence resulting in an offset.
To fix this, we do the same thing as we did for drawing the "really big
sprite" (size-type 9): just reset the rectangle we use every time we
draw a segment of the moving platform.
They're literally the exact same thing, except one is 4 and the other
has an 8. No need to have all that copy-pasted code.
Actually, the only other difference was that size-type 8 set the
drawRect to sprites_rect instead of tiles_rect for some reason? Even
though it doesn't matter, anyway, because SDL_BlitSurface() only cares
about the X and Y you pass it, not the width and height, which is the
only difference between tiles_rect and sprites_rect.
To make sure that people wouldn't wonder where size-type 8 went if they
saw a blank space between size-type 7 and size-type 9, I kept the
size-type 8 conditional, but inside it is just a comment telling you to
go to size-type 2.
Instead of copy-pasting all the BlitSurfaceStandard()s all over again,
just make the referenced vector a pointer that changes depending on
map.custommode.
There's a noticeable seam in the horizontal and warp backgrounds
whenever you enter a new room. Entering a new room triggers the game to
re-draw the entire warp background instead of simply scrolling what it
already has. This seam is the result of the initial background draw
being misaligned with the rest of the scrolling.
If you get out your measuring tools, you'll see that it's misaligned by
exactly 3 pixels (this applies to both horizontal and vertical warping).
If you look at the part of the code where the game draws fresh warping
textures after scrolling the existing ones offscreen, you'll see it
starts with an offset of 317, which is exactly 320 minus 3. And for
vertical, it uses 237, which is exactly 240 minus 3.
This is where the misalignment comes from. Since the incoming textures
are drawn 3 pixels to the left, but the initial draw isn't, this results
in a misalignment and causes the seam.
To fix this, draw the initial draw of the horizontal and vertical warp
backgrounds 3 pixels to the left.
It looks like one bracket got out-of-place for whatever reason. This
doesn't affect the case-switch at all, due to how case-switches work,
but it's still weird to look at.
Indentation has been updated accordingly.
Some custom levels have their own custom music and sync that music to
scripted cutscenes, which is actually pretty impressive. However,
they've always run into a small thorn, which is that you can easily
desync the music by unfocusing the game, because the audio will keep
playing when the game is unfocused.
This should remove that thorn by pausing the audio on unfocus, and
resuming when focused, so that the music can no longer desync, but you
can still pause the game by unfocusing it.
This is yet another feature in VCE that hasn't been upstreamed until
now.
It looks like this variable was originally intended to keep track of th
volume of the game, but then it was used as a boolean in main.cpp to
make sure the game didn't call Mix_Volume() and Mix_VolumeMusic() every
frame.
However, it is now a problem, because I put the music mute handling code
in the very branch that game.globalsound protects against, but since
game.globalsound is here, if I mute the music, then mute the whole game,
then unmute the music, and then unmute the whole game, sound effects
will no longer be muted but the music will still be muted, until I mute
and unmute the whole game again. This is annoying and inconsistent, so
I'm removing this check from the 'if (!game.muted)' branch.
Plus, given that the Mix_VolumeMusic() and Mix_Volume() calls happen
every frame if the game is muted anyways, it doesn't seem to be a
problem to call these every frame.
These do basically nothing. The only time they're used is
getGlobalSound() in an if-statement in main.cpp, but all that
if-conditional does is call setGlobalSound() anyway, which is something
that doesn't really have any side effects. So I'm removing these vars to
simplify the code.
This is for people who want to use their own soundtrack while playing
the game, but who don't want to mute the sound effects as well.
This feature was added to VCE, but it was added in the strangest way. It
was made an option in "game options" instead of being a keybind, and I
don't know why.
The environment variable SteamTenfoot corresponds with the game running
in Steam Big Picture mode or SteamOS if it is defined. There's a
certification process for both full controller support and Big Picture
mode, and being able to launch a file window in Big Picture mode is an
instant cert failure.
Have to add some includes and put these behind some ifdefs, of course.
I'm pretty sure FreeBSD and OpenBSD and Haiku are POSIX enough that the
"open" command will work on them, too.
I would've loved to make FILESYSTEM_openDirectoryEnabled a simple bool
instead of a function, but I ran into issues with putting it in the
FileSystemUtils header file, so I'll just make it a function and call it
a day.
This fixes a bug where levels in the levels list duplicate if there's an
invalid file (such as a folder) in the levels directory.
It looks like it happens because we don't free the memory if
PHYSFS_readBytes() encounters an error, even though we should. Then we
get into Undefined Behavior territory and end up reusing memory, and
here it just happens that previously, parsing the entire XML document
for each level file was enough to make the loaded file pointer point to
garbage that would fail the metadata check, but if we optimize it so we
don't parse the entire XML document, it starts reusing memory instead.
To find each individual tag quickly, to optimize levels list loading.
I opted to not read the tags <Created>, <Modified>, and <Modifiers> as
they're actually pretty useless.
Also I've added a tag finder for <MetaData> but it's not meant to be
used directly, it's only used to check that the tag exists.
This turns the implicit-fallthrough warning into a full compile-time
error.
Implicit fallthrough is when you forget a break statement in a
case-switch, thus letting one case fall through into the next case and
causing debugging headaches.
This is different from the good type of fallthrough that you use to have
one case with multiple different names, like so:
case 0:
case 1:
case 2:
In that case, it's obvious that you want to have fallthrough there.
The problem was, if you were in a time trial and quit, it wouldn't go
back to selecting your current time trial. But also if you were in a
custom level and quit, you would still be on the playerworlds menu.
The problem was twofold: first, I simply wasn't doing the custommode
check. But secondly, I couldn't use map.custommode directly, because
whenever you quit the game aggressively hardreset()s everything
immediately when you press ACTION.
There's probably a good reason for that aggressive hardreset(), so I
won't touch that hardreset() in any way. Instead, I had to introduce two
kludge variables wasintimetrial and wasincustommode to Game, and use
those to do the check proper.
This makes it more convenient if you have a large levels directory, as
some people in the VVVVVV custom levels community do.
On the first page, this option will change to be "last page" instead.
Since the addition of another menu option pushes up the list of levels
too close to the selected level data itself, I've had to move the list
of levels down by 4 pixels (but "next page"/"previous page"/"return to
menu" are still in their same position).
This feature was already added to VCE but hasn't been upstreamed until
now.
This also replaces some createmenu()s with returnmenu()s as needed even
when said createmenu()s already didn't go to the main menu.
Now when you exit the level editor, you'll be selecting the "level
editor" option in "play levels", and if you exit from a level you'll
still be selecting that level in the levels list.
Furthermore, regardless of what you're exiting, your cursor position
will be remembered.
This is to not reset your cursor position every time you return on
something. It's also to automatically keep track of which menu was the
previous menu instead of manually hardcoding said previous menu.
You were able to mismatch the color of the quicksave/telesave summary
and the text/background by pressing Esc when in the "continue" menu,
then pressing ACTION on "no, return".
This commit fixes that bug by putting the map.settowercolour(3) inside
the Menu::continuemenu creation code itself. However, since the
Menu::youwannaquit code does map.nexttowercolour() right after it does
the game.createmenu(), we also need to put the map.nexttowercolour()
before the game.createmenu() beforehand so it doesn't mess up the cyan
color that Menu::continuemenu sets.
Additionally, I removed the map.settowercolour() from the input handling
of Menu::play, as it's superfluous.
This marks pressing ACTION on "next page" in the levels list, credits,
pressing ACTION on "continue" in "You have unlocked" menus, and pressing
ACTION on an unlock option in the unlock menu and time trial unlock menu
as being the same menu.
This is to prevent creating unnecessary stack frames when using said
menu options in those menus.
These aren't necessary, the menu will update regardless. There isn't
even such a call for the mouse cursor toggle option, that's how
unnecessary it is.
Unless it's the main menu, or unless it's not the same menu. Whether or
not the menu is the same is left up to the caller, because some menus
could be the same but use different names, so we can't simply
automatically check that the names are different and assume that they
aren't the same menu.
This temp variable isn't used anywhere else, and even if it was it's set
to something every time it's used, so there's no risk of this commit
breaking any backwards compatibility.
I assume it was so a dev could mark the spot where they needed to put in
the analogue toggle, and they found a unique yet easy to remember
sequence of characters to Ctrl+F as a marker.
Looks like it was a remnant from the Flash days, and the "delete your
saves if you want to use slowdown" was a bit too mean so it stopped
being a thing in the C++ version.
Much more stylistic, you don't need to repeat "game.currentmenuname" for
each case, and you don't need to deal with the dangling first "if" that
doesn't have an "else".
I presume it was meant to have the text of the currently-selected menu
option inside it, before the code switched over to using the indice of
the currently-selected menu instead? Would've been more error-prone to
use the text name directly.
Stringly-typed things are bad, because if you make a typo when typing
out a string, it's not caught at compile-time. And in the case of this
menu system, you'd have to do an excessive amount of testing to uncover
any bugs caused by a typo. Why do that when you can just use an enum and
catch compile-time errors instead?
Also, you can't use switch-case statements on stringly-typed variables.
So every menu name is now in the enum Menu::MenuName, but you can simply
refer to a menu name by just prefixing it with Menu::.
Unfortunately, I've had to change the "continue" menu name to be
"continuemenu", because "continue" is a keyword in C and C++. Also, it
looks like "timetrialcomplete4" is an unused menu name, even though it
was referenced in Render.cpp.
I think it's about time that this number be updated, yeah? This isn't to
say that 2.3 is finished or almost finished or anything, this is just to
clearly differentiate that this isn't 2.2.
If you have invincibility mode or slowdown enabled, the game will not
let you select the Secret Lab, Time Trials, or No Death Mode. To make
this clearer, this commit grays out said options if they are disabled
for that reason.
The game won't let you select the Secret Lab if you're in invincibility
mode, probably so you can't set illegitimate Super Gravitron records
just by standing there and doing nothing.
However, for some reason, it'll still let you select the Secret Lab even
if you've slowed down the game. For consistency, let's prevent selecting
the Secret Lab if the game isn't running at fullspeed, too.
I've converted every "else if"-chain in menu render/input code to be a
case-switch, except for the levels list, the "game options" menu
(because it has the MMMMMM menu option which isn't a compile-time
constant), and the "play" menu (because it has the Secret Lab menu
option which also isn't a compile-time option).
I also did NOT convert some case-switches relating to unlocks in
Input.cpp, mostly because they use a system where the "if we have this
unlocked" conditional is a part of the "if this is the current menu
option" conditional, and they use the 'else' branch to play a sad sound
if that "if we have this unlocked" conditional fails.
I've also converted the game.gameframerate and game.crewrescued() "else
if"-chains to be case-switches instead.
There was one level that was indented with 2 spaces instead of 4, which
made everything else look weird. Then some lines were randomly indented
further for no reason.
Doing this before the next commit is done so as to not make the next
commit noisier.
This removes duplicate code that came about as a result of various
possible permutations of menu options, depending on being M&P, having no
custom level support, having no editor support, and having MMMMMM.
The menus with such permutations are the following:
- main menu
- "start game" is gone in MAKEANDPLAY
- "player levels" is gone in NO_CUSTOM_LEVELS
- "view credits" is gone in MAKEANDPLAY
- "game options"
- "unlock play data" is gone in MAKEANDPLAY
- "soundtrack" is gone if you don't have an mmmmmm.vvv file
- "player levels"
- "level editor" is gone in NO_EDITOR
I achieve this de-duplication by clever use of calculating offsets,
which I feel is the best way to de-duplicate the code with the least
amount of work, if a little brittle.
The other options are to (1) put function pointers on each MenuOption
object, which is pretty verbose and would inflate Game::createmenu() by
a lot, (2) switch all game.currentmenuoption checks to instead check for
the text of the currently-selected menu option, which is very
error-prone because if you make a typo it won't be caught at
compile-time, (3) add a unique ID to each MenuOption object that
represents a text but will error at compile-time if you make a typo,
however this just duplicates all the menu option text, which is more
code than was duplicated previously.
So I just went with this one.
I don't know why you would have to have both defined simultaneously, but
now you can.
The compile fail was caused by the fact that if both were defined, then
there would be an expression like this in Map.cpp:
switch (t)
{
case 0:
}
which is an invalid expression.
The solution is to put 'case 0:' into the MAKEANDPLAY ifdef-guard as
well.
Just like I moved the menu ACTION press handler, I'm doing this as well.
It only removes one level of indentation, but it makes titlerender()
easier to understand.
Just like before, I have to put the separate function first, else
titlerender() won't know what it is.
Previously, the code looked something like:
else { if (...) {...} else { if (...) {...} else { etc. } }
And kept indenting every time there was an else-if.
This commit puts all else-ifs on the same indentation level, so it
doesn't slowly push the code to the right.
This takes out 3 indentation levels from the ACTION press handling,
making titleinput() easier to read as a whole.
Unfortunately, we have to put menuactionpress() first, even though I'd
want it the other way around, otherwise titleinput() won't know what it
is.
If we need it (which I don't think we will be anytime soon) we can
always just get it back through source control. Otherwise, it simply
gets in the way.
Firstly, menu options are no longer ad-hoc objects, and are added by
using Game::option() (this is the biggest change). This removes the
vector Game::menuoptionsactive, and Game::menuoptions is now a vector of
MenuOption instead of std::string.
Secondly, the manual tracker variable of the amount of menu options,
Game::nummenuoptions, has been removed, in favor of using vectors
properly and using Game::menuoptions::size().
As a result, a lot of copy-pasted code has been removed from
Game::createmenu(), mostly due to having to have different versions of
menus depending on whether or not we have certain defines, or having an
mmmmmm.vvv file inside the VVVVVV directory. In the old days, you
couldn't just add or remove a menu option conveniently, you had to
shuffle around the position of every other menu option too, which
resulted in lots of copy-pasted code. But now this copy-pasted code has
been de-duplicated, at least in Game::createmenu().
This removes map.numshinytrinkets in favor of using
map.shinytrinkets.size(). Having automatic length tracking is much less
error-prone and less tedious.
