So, earlier in the development of 2.0, Simon Roth (I presume)
encountered a problem: Oh no, all my backgrounds aren't appearing! And
this is because my foregroundBuffer, which contains all the drawn tiles,
is drawing complete black over it!
So he had a solution that seems ingenius, but is actually really really
hacky and super 100% NOT the proper solution. Just, take the
foregroundBuffer, iterate over each pixel, and DON'T draw any pixel
that's 0xDEADBEEF. 0xDEADBEEF is a special signal meaning "don't draw
this pixel". It is called a 'key'.
Unfortunately, this causes a bug where translucent pixels on tiles
(pixels between 0% and 100% opacity) didn't get drawn correctly. They
would be drawn against this weird blue color.
Now, in #103, I came across this weird constant and decided "hey, this
looks awfully like that weird blue color I came across, maybe if I set
it to 0x00000000, i.e. complete and transparent black, the issue will be
fixed". And it DID appear to be fixed. However, I didn't look too
closely, nor did I test it that much, and all that ended up doing was
drawing the pixels against black, which more subtly disguised the
problem with translucent pixels.
So, after some investigation, I noticed that BlitSurfaceColoured() was
drawing translucent pixels just fine. And I thought at the time that
there was something wrong with BlitSurfaceStandard(), or something.
Further along later I realized that all drawn tiles were passing through
this weird OverlaySurfaceKeyed() function. And removing it in favor of a
straight SDL_BlitSurface() produced the bug I mentioned above: Oh no,
all the backgrounds don't show up, because my foregroundBuffer is
drawing pure black over them!
Well... just... set the proper blend mode for foregroundBuffer. It
should be SDL_BLENDMODE_BLEND instead of SDL_BLENDMODE_NONE.
Then you don't have to worry about your transparency at all. If you did
it right, you won't have to resort this hacky color-keying business.
*sigh*
For some reason, the cursor would be either disabled and re-enabled if
you switched to windowed mode, or it would be always enabled if you
switched to fullscreen mode. This only happened when you toggled
fullscreen using the Alt+Enter, Alt+F, or F11 keybinds, and the
fullscreen option in graphic options doesn't have this problem.
This cursor toggling business seems like an arcane incantation back in
the days of SDL1.2, now since no longer necessary with SDL2. However,
after some testing, it seems like removing these indecipherable runes
don't cause any harm, so I'm going to remove them.
Fixes#371.
Achievements could be unlocked in custom levels/make and play, so this adds the wrapper function `game.unlockAchievement` which calls `NETWORK_unlockAchievement` if `map.custommode` is false.
Also, this function and `Game::unlocknum` have both been `ifdef`ed to be empty if MAKEANDPLAY is defined.
Okay, so basically here's the include layout that this game now
consistently uses:
[The "main" header file, if any (e.g. Graphics.h for Graphics.cpp)]
[blank line]
[All system includes, such as tinyxml2/physfs/utfcpp/SDL]
[blank line]
[All project includes, such as Game.h/Entity.h/etc.]
And if applicable, another blank line, and then some special-case
include screwy stuff (take a look at editor.cpp or FileSystemUtils.cpp,
for example, they have ifdefs and defines with their includes).
Including a header file inside another header file means a bunch of
files are going to be unnecessarily recompiled whenever that inner
header file is changed. So I minimized the amount of header files
included in a header file, and only included the ones that were
necessary (system includes don't count, I'm only talking about includes
from within this project). Then the includes are only in the .cpp files
themselves.
This also minimizes problems such as a NO_CUSTOM_LEVELS build failing
because some file depended on an include that got included in editor.h,
which is another benefit of removing unnecessary includes from header
files.
Whoops.
Noticed this earlier when I was merging upstream back into VCE, and
interestingly enough, it doesn't look like cppcheck warns about
undeffing a non-existent define.
This patch optimizes the loop used to limit the framerate in 30-FPS-only
mode so that it uses SDL_Delay() instead of an accumulator. This means
that the game will take up less CPU power in 30-FPS-only mode. This also
means that the game loop code has been simplified, so there's only two
while-loops, and only two places where game.over30mode is checked, thus
leading to easier-to-understand logic.
Using an accumulator here would essentially mean busywaiting until the
34 millisecond timer was up. (The following is just what leo60228 told
me.) Busywaiting is bad because it's inefficient. The operating system
assumes that if you're busywaiting, you're performing a complex
calculation and handles your process accordingly. And this is why
sleeping was invented, so you could busywait without taking up
unnecessary CPU time.
There's a bug where playtesting from Ved doesn't properly play the music
of the level, due to no fault with Ved.
This was because the music was being faded out by
scriptclass::startgamemode() case 23 after main() called music.play().
To fix this, just call music.play() when all the other variables are
being set in Game::customloadquick().
The problem we're running into is entirely contained in the Screen - we need to
either decouple graphics context init from Screen::init or we need to take out
the screenbuffer interaction from loadstats (which I'm more in favor of since we
can just pull the config values and pass them to Screen::init later).
Now that you have a mini menu in MAPMODE, it's a bit annoying to have to
deal with the slowed-down timestep when pressing left/right/ACTION
inside it. Especially since going to an options menu restores the
timestep back to normal (because it's in TITLEMODE). Also removed it
from TELEPORTERMODE for consistency.
The Alt+Enter Glitch is a funny glitch where if you press any toggle
fullscreen keybind during a cutscene, Viridian will stop moving (if
they're being moved by a walk()) and ACTION will start being held down
for them. Meaning in most cases you can interrupt a walk and flip at the
same time.
This can obviously break cutscenes if a casual just wants to toggle
fullscreen, so I'm fixing it. But it will be unfixed in glitchrunner
mode in case you want to glitch out custom levels (I know I do).
More information on the Alt+Enter Glitch is available here:
https://gitgud.io/infoteddy/vvvvvv-knowledge/blob/master/bugs/bugs.md#the-altenter-glitch
(The page is a bit outdated, some bugs have been fixed in 2.3 already.)
This patch is very kludge-y, but at least it fixes a semi-noticeable
visual issue in custom levels that use internal scripts to spawn
entities when loading a room.
Basically, the problem here is that when the game checks for script
boxes and sets newscript, newscript has already been processed for that
frame, and when the game does load a script, script.run() has already
been processed for that frame.
That issue can be fixed, but it turns out that due to my over-30-FPS
game loop changes, there's now ANOTHER visible frame of delay between
room load and entity creation, because the render function gets called
in between the script being loaded at the end of gamelogic() and the
script actually getting run.
So... I have to temporary move script.run() to the end of gamelogic()
(in map.twoframedelayfix()), and make sure it doesn't get run next
frame, because double-evaluations are bad. To do that, I have to
introduce the kludge variable script.dontrunnextframe, which does
exactly as it says.
And with all that work, the two-frame (now three-frame) delay is fixed.
In my previous PR, I wrongly assumed that I could just replace the `i`
handling code of those options with an `i++;` at the beginning, and thus
I could put all blocks' `i++;` into ARG_INNER(). Well I was wrong,
because the code was written the original way for a reason, namely that
we still need `i` to point to the -playx/y/rx/ry/gc/music argv so we can
re-compare which argument led us into this code block.
Just to be helpful if someone has a failing FILESYSTEM_init(), but
doesn't know that's their issue and keeps wondering why VVVVVV just
exits with code 1.
The command-line argument parsing code has a lot of copy-paste. This
copy-paste would get even worse if I added safety checks to make sure
you couldn't index argv out-of-bounds by having an argument like
`-renderer` without having anything after it, i.e. you'd be doing the
command `./VVVVVV -renderer`.
Previously, only the playtest arguments (apart from the recently-added
`playassets`) had this safety check, but the message it printed whenever
the safety check failed was always "-playing option requires one
argument" regardless of whatever argument actually failed to be parsed.
So I fixed it so that all arguments actually output the correct
corresponding failed argument instead.
Also, `strcmp(argv[i], <name>) == 0` is really kind of noisy, even if
you understand what it does perfectly well.
So I refactored it with a bunch of macros. ARG() just does the strcmp()
char* comparison, and ARG_INNER() does the safety check and returns 1,
along with printing a message, if the safety check fails.
This is used if you're loading a level file from STDIN. The game needs
to know the actual level assets directory you're referring to, since
when it gets the level from STDIN, it doesn't know the actual filename
of the level.
Fixes#309.
Ugh, this is terrible and stupid and I hate myself for it.
Anyway, since the SDL2 VSync hint only applies when the renderer is
created, we have to re-create the renderer whenever VSync is toggled.
However, this also means we need to re-create m_screenTexture as well,
AND call ResizeScreen() after that or else the letterbox/integer modes
won't be applied.
Unfortunately, this means that in main(), gameScreen.init() will create
a renderer only to be destroyed later by graphics.processVsync().
There's not much we can do about this. Fixing this would require putting
graphics.processVsync() before gameScreen.init(). However, in order to
know whether the user has VSync set, we would have to call
game.loadstats() first, but wait, we can't, because game.loadstats()
mutates gameScreen! Gahhhhhh!!!!
@leo60228 suggested to fix that problem (
https://github.com/TerryCavanagh/VVVVVV/pull/220#issuecomment-624217939
) by adding NULL checks to game.loadstats() and then calling it twice,
but then you're trading wastefully creating a renderer only to be
destroyed, for wastefully opening and parsing unlock.vvv twice instead
of once. In either case, you're doing something twice and wasting work.
Otherwise a NO_CUSTOM_LEVELS build would fail. Also I got rid of the
'graphics.flipmode = false;' in the fixed loop because I don't think it
does anything.
This is needed for the next step. I want to put all the loop stuff in
their own functions so the code isn't one huge blob, but to do that I'll
need to make 'time' a global variable, but I can't do that because
actually 'time' is already a function, apparently, and you're only
allowed to shadow variables when already inside a function.
This is to make sure no lerping occurs in 30-FPS mode, otherwise things
might look weird. A good case that this fixes is how entities look in a
double-gotoroom (they should be completely frozen in 30-FPS mode).
There is now an option in "graphic options" named "toggle fps", which
toggles whether the game visually runs at 1000/34 FPS or over 1000/34
FPS. It is off by default.
I've had to put the entire game loop in yet another set of braces, I'll
indent it next commit.
This is because otherwise, on my Linux system at least, the game will
take up a lot of CPU that it doesn't really need to (I only have a 60hz
monitor).
On Windows, it looks like Windows already enforces V-sync for
applications anyway, unless they have exclusive fullscreen control.
Linux doesn't enforce V-sync on apps and lets them take up as much CPU
as they want, so I'm putting this here to limit the framerate.
The game is already actually 30 FPS anyway, the nice smooth FPS is just
visual. V-sync won't introduce any more "input lag" than already exists.
As much as it looks cool to have a slowly-scrolling background on the
title screen, it's quite annoying that slowmode applying on the title
screen mean that your keypresses are less responsive.
To fix this, I draw another row/column of incoming textures. But of
course, I have to extend the size of the towerbuffer, otherwise the
incoming textures will just be gone.
This has to be done in order to fix rendering when on a conveyor or
moving platform and actively moving with or against it. Pretty sure this
shouldn't break anything, oldxp/oldyp is mostly visual after all (and by
the time it's used for gravity line collision checking,
updateentitylogic() would've already gotten around to it anyway).
Incidentally, this also fixes a jitter that would occur if you were
moving at the time you died or collected a trinket or custom crewmate,
due to the game temporarily freezing and either doing deathsequence or
completestop.
Otherwise the screen will shake too fast for my liking.
Also I'm planning to add an FPS limiting option later (because right
now, un-capping the FPS is pretty wasteful and eats up lots of
resources, especially since I have only a 60hz monitor), and it'd feel
weird if screen shaking updated every delta timestep.
I've added a function Graphics::lerp() which simply interpolates between
two values given a certain alpha value. It's just like drawing a
straight line between two points.
Also, Graphics now has an `alpha` attribute, and it is set on every
deltatime update to be used in linear interpolation.
Ok, and this is where the fun starts.
In an ideal world, this would be the end of this patch. However, of
course, there are many, MANY places in the game that update
fixed-timestep timers DIRECTLY inside the render function, which is not
ideal because it means those timers go super fast.
I'll have to fix those later.
Ok, NOW indent it. I didn't indent it previously because the diffs are
annoying to read if there's an indent that doesn't otherwise change
anything (and even now it's pretty annoying to read).
Alright, this is the start of the over-30-FPS patch!
First things first, we'll need to make it possible to have a separate
deltatime loop outside of the fixed timestep loop. And for that, we
can't be using SDL_Delay(), as SDL_Delay() (as you might imagine) blocks
the whole program.
Instead we'll be using this thing called an accumulator. It looks at how
long the previous poll took (the raw deltatime), and lets timesteps pass
accordingly.
On a side note, I've had to split the `time` and `timePrev` declaration
each onto their own separate line, otherwise there's undefined behavior
from `time` not being initialized.
I use `accumulator = fmodf(...)` instead of `accumulator -=
timesteplimit` because otherwise it'll fast-forward if it's behind,
which is a jarring thing to see.
Also in preparation for what's going to come down the over-30-FPS road,
I've also added `deltatime` and `alpha`. `deltatime` is going to be used
if the game is in slowdown mode, and `alpha` is going to be used for
linear interpolation of animations.
By the way, what was the main game loop previously (and is now the new
timestep loop) is now in an extra set of curly braces, but I haven't
indented it yet to reduce the noise in this commit.
A few months ago, I added ghosts to the VVVVVV: Community Edition editor. I was told recently I should think
about upstreaming it, and with Terry saying go ahead I finally ported them into VVVVVV. There's one slight
difference however--you can choose whether you have them or not in the editor's settings menu. They're off by
default, and this is saved to the save file.
Anyway, when you're playtesting, the game saves the players position, color, room coordinates and sprite every 3
frames. The max is 100, where if it tries to add more, the oldest one gets removed.
When you exit playtesting, the saved positions appear one at a time, and you can use the Z key to speed it up.
[Here's a video of them in action.](https://o.lol-sa.me/4H21zCv.mp4)
Main game would retain custom level assets, now fixed. Also, custom fonts load properly. Finally, levels can be stored as a zip and placed in the levels folder, with the .vvvvvv file at the root of the zip and custom asset folders (graphics, sounds etc) also at the root.
Blackout mode doesn't work properly, because the game doesn't actually
black out the screen, it merely stops drawing things. Oh and only some
things at that, some other things are still drawn. This results in a
freeze-frame effect, which is apparently fixed in the Switch version.
Custom levels utilize this freeze-frame effect, so it's a bit annoying
that the "Game paused" screen draws on top of it and makes it so that
the freeze-frame freezes on "Game paused" until blackout is turned off.
So I'm making it so that "Game paused" doesn't get drawn in blackout
mode. However it will still do graphics.render() because otherwise it'll
just result in a black screen.
The code to decrement the timers for flashing and shaking is now handled
outside the game-gamestate case-switch, instead of having to be
duplicated inside each render function.
As a bonus, I made it so the timer decrements even if screen effects are
disabled. This is to prevent any theoretical situation where the timer
can "pile up" due to disabled screen effects not letting it tick down.
This removes a lot of duplicate code, which towerrender() mostly
consisted of, even though the only difference is that it draws a
separate map and screen edge spikes are drawn.
Looks like I forgot to test that my music silencing patch didn't break
the music being silent during the "You have found a shiny trinket" and
"You have found a shiny crewmate" text boxes. So I've added a check for
game.completestop in the music handling in main.cpp.
Found this bug while I was testing my towerlogic/gamelogic merge patch.
It looks like one bracket got out-of-place for whatever reason. This
doesn't affect the case-switch at all, due to how case-switches work,
but it's still weird to look at.
Indentation has been updated accordingly.
Some custom levels have their own custom music and sync that music to
scripted cutscenes, which is actually pretty impressive. However,
they've always run into a small thorn, which is that you can easily
desync the music by unfocusing the game, because the audio will keep
playing when the game is unfocused.
This should remove that thorn by pausing the audio on unfocus, and
resuming when focused, so that the music can no longer desync, but you
can still pause the game by unfocusing it.
This is yet another feature in VCE that hasn't been upstreamed until
now.
It looks like this variable was originally intended to keep track of th
volume of the game, but then it was used as a boolean in main.cpp to
make sure the game didn't call Mix_Volume() and Mix_VolumeMusic() every
frame.
However, it is now a problem, because I put the music mute handling code
in the very branch that game.globalsound protects against, but since
game.globalsound is here, if I mute the music, then mute the whole game,
then unmute the music, and then unmute the whole game, sound effects
will no longer be muted but the music will still be muted, until I mute
and unmute the whole game again. This is annoying and inconsistent, so
I'm removing this check from the 'if (!game.muted)' branch.
Plus, given that the Mix_VolumeMusic() and Mix_Volume() calls happen
every frame if the game is muted anyways, it doesn't seem to be a
problem to call these every frame.
These do basically nothing. The only time they're used is
getGlobalSound() in an if-statement in main.cpp, but all that
if-conditional does is call setGlobalSound() anyway, which is something
that doesn't really have any side effects. So I'm removing these vars to
simplify the code.
This is for people who want to use their own soundtrack while playing
the game, but who don't want to mute the sound effects as well.
This feature was added to VCE, but it was added in the strangest way. It
was made an option in "game options" instead of being a keybind, and I
don't know why.
Most of the code was already commented out, and those comments were
removed in earlier commits, but this removes all recording variables
from Game and simplifies the game-gamestate handling in main.cpp a
little bit.
This removes all global args in all functions in titlerender.cpp.
Additionally, all 'dwgfx' has been renamed to 'graphics' in that file
(there are a lot of them, as you might guess).
This commit removes the passing around of global args in the logic
functions. Additionally, all 'dwgfx' has been replaced with 'graphics'
in Logic.cpp.
This removes global arg passing from all functions on editorclass.
Callers have been updated correspondingly. Additionally, all 'dwgfx' has
been replaced with 'graphics' in editor.cpp.
This commit removes all global args from the parameters of each function
on the scriptclass object, and updates all places they are called
accordingly. It also changes all instances of 'dwgfx' to 'graphics' in
Script.cpp.
Interestingly enough, it looks like editor.h depended on Script.h's
class define of the musicclass. I've temporarily placed the class define
in editor.h, but by the end of this patchset it'll be gone.
I've decided to call dwgfx/game/map/obj/key/help/music the "global args".
Because they're essentially global variables that are being passed
around in args.
This commit removes global args from all functions on the Game class,
and deals with updating the callsites of said functions accordingly. It
also renames all usages of 'dwgfx' in Game.cpp to 'graphics', since the
global variable is called 'graphics' now.
Interesting to note, I was removing the class defines from Game.h, but
it turns out that Graphics.h depends on the mapclass and entityclass
defines from Game.h. And also Graphics.h spelled mapclass wrong (it
forgot the "class") so I just decided to use that existing line instead.
This is only temporary and after all is said and done, at the end of
this pull request those class defines will be gone.
Instead of passing the error codes out of the function, just handle the
errors directly as they happen, and fail gracefully if something goes
wrong instead of continuing.
Whenever you would press Alt+Enter, or Alt+F, or on macOS Command+Enter,
or on macOS Command+F, or F11, the game would print this useless error
message to console, every single time: "Error: failed: " and it would
concatenate SDL_GetError() after it, but most of the time SDL_GetError()
is blank, so it would print just that.
Instead, what the fullscreen shortcut will now do is check the result of
the relevant SDL functions, BEFORE it decides to print an error message.
And when it DOES print an error message, it will be less vague and will
say instead "Error: toggling fullscreen failed: <output of
SDL_GetError()>".
This means Screen::ResizeScreen() and Screen::toggleFullScreen() are now
int-returning functions. Ideally, every function interfacing with SDL
would return an error code, but that's too much for this simple patch.
Additionally, I took the opportunity to clean up the surrounding
formatting of the code a bit, most notably dedenting the
keypress-clearing stuff by one tab level, converting the
shortcut-handling code to spaces, and removing commented-out code.
If you Alt+Tabbed while in fullscreen mode, the game would stay in
fullscreen instead of switching to windowed, but there was a chance it
would EITHER use the same internal resolution which would mismatch the
window resolution (don't know when exactly this happens, but still) and
stay being in an actual windowed mode, OR switch between
fullscreen/windowed every other time you re-focused the window, which is
annoying.
Now, whenever you Alt+Tab in fullscreen, the game will be in windowed
mode, and then when you re-focus it will go back to fullscreen.
Consistently.
Previously, the only way to guarantee that the game actually saved your
unlock.vvv after changing an option, was to ensure you pressed ACTION on
the "quit game" menu option.
This makes Alt+F4 graceful in that pressing it will also save
unlock.vvv, as it should. Now truly UN-graceful ways of exiting the
game, such as SIGSEGV, SIGABRT, or pkill -9 or pkill -15 will not save
unlock.vvv, as should be the case.
This turns the array 'edentity' into a proper vector, and removes the need to
use a separate length-tracking variable and manually keep track of the actual
amount of edentities in the level by using the long-winded
'EditorData::GetInstance().numedentities'. This manual tracking was more
error-prone and much less maintainable.
editorclass::naddedentity() has been removed due to now functionally being the
same as editorclass::addedentity() (there's no more
'EditorData::GetInstance().numedentities' to not increment) and for also being
unused in the first place.
editorclass::copyedentity() has been removed because it was only used to shift
the rest of the edentities up manually, but now that we let C++ do all the
hard work it's no longer necessary.
This is useful for distributions, which may not want to put data.zip in
the same directory as the binary. This can't be distribution-specific
due to the license ("Altered source/binary versions must be plainly
marked as such, and must not be misrepresented as being the original
software.").
This commit makes `help`, `graphics`, `music`, `game`, `key`, `map`, and
`obj` essentially static global objects that can be used everywhere.
This is useful in case we ever need to add a new function in the future,
so we don't have to bother with passing a new argument in which means we
have to pass a new argument in to the function that calls that function
which means having to pass a new argument into the function that calls
THAT function, etc. which is a real headache when working on fan mods of
the source code.
Note that this changes NONE of the existing function signatures, it
merely just makes those variables accessible everywhere in the same way
`script` and `ed` are.
Also note that some classes had to be initialized after the filesystem
was initialized, but C++ would keep initializing them before the
filesystem got initialized, because I *had* to put them at the top of
`main.cpp`, or else they wouldn't be global variables.
The only way to work around this was to use entityclass's initialization
style (which I'm pretty sure entityclass of all things doesn't need to
be initialized this way), where you actually initialize the class in an
`init()` function, and so then you do `graphics.init()` after the
filesystem initialization, AFTER doing `Graphics graphics` up at the
top.
I've had to do this for `graphics` (but only because its child
GraphicsResources `grphx` needs to be initialized this way), `music`,
and `game`. I don't think this will affect anything. Other than that,
`help`, `key`, and `map` are still using the C++-intended method of
having ClassName::ClassName() functions.
