A minor gripe, but one thing I didn't notice with commit
b4579d88d3 is that it now results in two
dialogs if data.zip is missing: The first being the "data.zip is
missing" dialog, and the second is the generic "Unable to initialize
filesystem" dialog.
So just bail early if data.zip can't be found, it's going to take the
error path in main() and also bail regardless.
`/EHsc` does not actually disable exceptions on MSVC, it only makes the
compiler assume that `extern "C"` functions never throw C++ exceptions.
We had a discussion on Discord about actually disabling exceptions, and
from research, that requires defining `_HAS_EXCEPTIONS=0`, but it's
unsupported and undocumented so we deemed the benefits not worth it.
Thus, we will stay with `/EHsc`. But the comment still has to be
updated.
[skip ci]
lang/README-programmers.txt accidentally lists the name of the
font::print function twice, when the second one should've been
font::print_wrap instead. Oops.
[skip ci]
Commit 53d725f78a, intended to fix an
overzealous commit, was itself overzealous. This is because it applied
to all entities when it should only apply to entity-emitting entities.
To fix this, `entityclonefix` needs to no-op if the entity is not an
entity emitter.
Fixes#1176.
Commit 4f881b9e26 fixed a duplication bug
where enemy movement types 10 and 12 would keep duplicating itself on
every frame if it was spawned outside of the rooms they were supposed to
be used in the main game. The downside was that this was an overzealous
fix and unintentionally broke some cases that were working before.
As brought to my attention by Ally, you can no longer place an edentity
with a `p1` of 10 or 12 (translating to movement type 10 or 12) in the
proper rooms and have it spawn perfectly working entities (that don't
clone on themselves every frame), whereas you could in 2.2. This is
considered a regression from 2.3.
So the problem here is that the reason the two emitter entities were so
dangerous outside their respective rooms is because the entity they
spawned (`createentity` entry 1) checked if it was in the correct rooms,
and if so, it would call `setenemy`, and `setenemy` would set the
`behave` attribute (movement type) correctly, and so the new entity
would have a different `behave` that wouldn't be the exact same `behave`
as the previous one, so it wouldn't be a duplicate emitter entity.
The previous `entityclonefix` worked okay for entry 1, because it would
only be run if the room checks failed and `setenemy` wasn't called, but
it broke a previously-working case for entry 56, because it was always
run for entry 56.
So the best way to check if we have a dangerous entity is not by seeing
if it is still `behave` 10 or 12 at the end of entity creation - because
10 or 12 could be harmless under the right conditions - but by checking
if the right conditions were satisfied, and if not, then neutralize the
entity.
I considered making the emitter entities work everywhere - which would
be simpler - but I didn't want to go too far and add a new feature,
especially in a minor release.
This fixes a minor issue where if you had a zip in the levels list, but
then removed it, it would still show up in the levels list after
reloading it (if you also had a .vvvvvv file named the same as in the
zip) even though it shouldn't.
Thankfully, this didn't lead to a memory leak or duplicate zip mounts or
anything like that, because PhysFS ignores mounting a zip if it's
already mounted.
This also didn't result in a level entry from a zip persisting after
removal after reloading the levels list, because the entry would be gone
due to the .vvvvvv file not being found.
The intention of the `-console` argument was to enable seeing console
output on Windows without having to use workarounds. However, this
didn't actually work for arguments like `-addresses` and `-version`,
because the program would exit first before it could get the chance to
create the console.
The other issue is that the console closes too quickly before output can
be read by the user. So to fix that, we must hold it open and let the
user close it when they want to by waiting for an enter press from
STDIN.
This fixes a regression from 2.4 where the foreground wouldn't update
after using the G keybind to go to a room, requiring the user to touch a
tile to update the rendering.
This fixes a bug report from Elomavi that you could still softlock from
warping to ship and incrementing the gamestate by pressing ACTION, which
is diverging behavior from how it was in 2.3. Warping to ship and
incrementing by pressing ACTION is useful behavior for a couple niche
speedrun categories.
I had already fixed this earlier by ignoring state locking if
glitchrunner 2.2 or 2.0 was enabled, but softlocks could still happen
because having glitchrunner mode off still enabled you to increment the
gamestate when otherwise unintended. Softlocks shouldn't happen.
But without removing state locking entirely, I've chosen a middle ground
where it will only be disabled if you press ACTION. That signifies
intent that you still want to perform state incrementing glitches even
with glitchrunner mode off (but in the future it could be considered a
2.3/2.4 glitch that could be patched and made re-enable-able). That way,
casual players can't interrupt the warp to ship by accident (unless they
accidentally press ACTION) while softlocks will be removed.
For localization, the "Thanks for playing!" text was split into two
lines, when it was originally one line. Unfortunately, it was not
updated to account for Flip Mode, so in Flip Mode, it looked like
"playing! Thanks for".
This has been fixed.
If there was a scaling mode value (serialized in the XML as <stretch>
for legacy reasons) that was not 0 or 1 or 2, then the rectangle with
the stretch information would not be initialized by get_stretch_info,
which would lead to a crash, either from dividing by zero (most likely)
or from reading an uninitialized value.
To fix this, when reading <stretch>, normalize it to a sane default if
the value is otherwise bogus. And for good measure, an assertion is
added in get_stretch_info() if the value is still somehow bogus.
Fixes#1155.
This is just a small visual fix to an inconsistency with textbox
colors in simplified scripting. The `reply` command is meant to be
used for the player, and always correctly positions it above the
player, while the `say` command may be used to generate a cyan textbox
that's positioned above a cyan non-player crewmate. However, the color
for both textboxes is always `cyan`, so the `reply` command doesn't use
the (normally identical) `player` color even though all its other
behavior (squeak, position) does. Now that customized textbox colors
were added in 2.4 (#910), it's a shame that this distinction isn't
made between `cyan` and `player`, so this change addresses that (before
we're stuck with levels that change `cyan` but not `player`).
After some discussion about the previous commit, the usecase of
managing tons of basedirs and locking files in the filesystem might
mean it gets annoying to have the language screen show up again
whenever a new language is added, for a small group of people. The
solution to get the best of both worlds is to only re-ask for the
language in the default basedir. This means barely anyone will miss
their language having been newly added (especially since barely anyone
will use any custom basedirs, let alone ONLY custom ones).
Now that two new variants of Spanish have been added, it would be
a shame that many players from Latin-America/Argentina may stay on
Castilian or English because they don't realize the new versions
were added for them. So now, if you've set your language in 2.4.0,
the language screen will show up once more in 2.4.1. This is done by
simply incrementing the lang_set flag to 2 - so that if it's 0 or 1,
your language setting is considered to be possibly outdated.
This shouldn't inconvenience players who don't need to select a new
language - their existing language will still be pre-selected, so they
can just hit ACTION once.
Terry confirms he did the same thing with Dicey Dungeons and says
it's a good idea (and that nobody minds).
This fixes the possibility of the "resize to nearest" graphics option
resizing the game window to be bigger than the resolution of the user's
desktop monitor.
To fix this, just subtract multiples of 320x240 until the chosen
multiple is smaller than the dimensions of the desktop.
Discord user Dzhake discovered this issue.
All of them were changed except for the one in meta.xml. I think it's
safe to assume this is correct, because everywhere else, the same
"Oprime {button} para" pattern always became "Pulsa {button} para" too.
For future PRs, it'll be very nice to have full control over how VVVVVV
gets drawn to the window. This means we can use the entire window size
for things like touch input, drawing borders, or anything we want.
They were missing the latest strings and also still had strings that
had been deleted.
(Whoever commits the upcoming delivery should also sync that version)
This is so they will be updated when switching language with CTRL+F8.
Most of the editor notes are simple text that don't use any string
formatting. For the ones that aren't, some (saving and loading, changing
map size) reference variables that wouldn't change without initiating a
new note anyway. For the others, i.e. the ones that _do_ reference
variables that could easily be changed (tileset name, speed) by
switching the current room, we cache their values and use the cached
values when drawing the note. Unfortunately, this requires adding a
couple of ugly attributes to editorclass, but it'll be fine.
These are simple strings (no vformat), so we can just un-bake them to
make sure that cycling languages with one of them onscreen updates them
accordingly.
These weren't getting updated when cycling language with CTRL+F8. This
is because they would be already baked. Luckily, at least the bool
keeping track of whether or not to translate them in the first place
already exists, so we can just rely on that.
This makes it work pretty well. It basically just resets the state of
the limits check and starts from the first limit broken (if any), which
is behavior that makes sense to me.
Otherwise, without this, it seems to invalidate pointers and, on my
machine, start pulling strings from the language XML, which is
horrifying.
Not gonna lie, I am a bit disappointed at having to do this, because it
actually worked pretty well despite a few bugs depending on which
language you entered with. But that's only because I'm working with
the official translation files, which are in sync with each other.
With translation files that are completely arbitrary, it would be
apparent that switching languages during the cutscene test doesn't
really make sense. Like, at all. That's because the list of cutscenes is
populated entirely from language-specific XML and the cutscenes in them
are also from language-specific XML. So keeping the same position in the
menu doesn't really make sense, and keeping the same position in a
cutscene definitely doesn't make sense.
