Note that level dir listing still uses plenty of STL (including the end
product - the `LevelMetaData` struct - which, for the purposes of 2.3,
is okay enough (2.4 should remove STL usage entirely)); it's just that
the initial act of iterating over the levels directory no longer takes
four or SIX(!!!) heap allocations (not counting reallocations and other
heap allocations this patch does not remove), and no longer does any
data marshalling.
Like text splitting, and binary blob extra indice grabbing, the current
approach that FILESYSTEM_getLevelDirFileNames() uses is a temporary
std::vector of std::strings as a middleman to store all the filenames,
and the game iterates over that std::vector to grab each level metadata.
Except, it's even worse in this case, because PHYSFS_enumerateFiles()
ALREADY does a heap allocation. Oh, and
FILESYSTEM_getLevelDirFileNames() gets called two or three times. Yeah,
let me explain:
1. FILESYSTEM_getLevelDirFileNames() calls PHYSFS_enumerateFiles().
2. PHYSFS_enumerateFiles() allocates an array of pointers to arrays of
chars on the heap. For each filename, it will:
a. Allocate an array of chars for the filename.
b. Reallocate the array of pointers to add the pointer to the above
char array.
(In this step, it also inserts the filename in alphabetically -
without any further allocations, as far as I know - but this is a
COMPLETELY unnecessary step, because we are going to sort the list
of levels by ourselves via the metadata title in the end anyways.)
3. FILESYSTEM_getLevelDirFileNames() iterates over the PhysFS list, and
allocates an std::vector on the heap to shove the list into. Then,
for each filename, it will:
a. Allocate an std::string, initialized to "levels/".
b. Append the filename to the std::string above. This will most
likely require a re-allocation.
c. Duplicate the std::string - which requires allocating more memory
again - to put it into the std::vector.
(Compared to the PhysFS list above, the std::vector does less
reallocations; it however will still end up reallocating a certain
amount of times in the end.)
4. FILESYSTEM_getLevelDirFileNames() will free the PhysFS list.
5. Then to get the std::vector<std::string> back to the caller, we end
up having to reallocate the std::vector again - reallocating every
single std::string inside it, too - to give it back to the caller.
And to top it all off, FILESYSTEM_getLevelDirFileNames() is guaranteed
to either be called two times, or three times. This is because
editorclass::getDirectoryData() will call editorclass::loadZips(), which
will unconditionally call FILESYSTEM_getLevelDirFileNames(), then call
it AGAIN if a zip was found. Then once the function returns,
getDirectoryData() will still unconditionally call
FILESYSTEM_getLevelDirFileNames(). This smells like someone bolting
something on without regard for the whole picture of the system, but
whatever; I can clean up their mess just fine.
So, what do I do about this? Well, just like I did with text splitting
and binary blob extras, make the final for-loop - the one that does the
actual metadata parsing - more immediate.
So how do I do that? Well, PhysFS has a function named
PHYSFS_enumerate(). PHYSFS_enumerateFiles(), in fact, uses this function
internally, and is basically just a wrapper with some allocation and
alphabetization.
PHYSFS_enumerate() takes in a pointer to a function, which it will call
for every single entry that it iterates over. It also lets you pass in
another arbitrary pointer that it leaves alone, which I use to pass
through a function pointer that is the actual callback.
So to clarify, there are two callbacks - one callback is passed through
into another callback that gets passed through to PHYSFS_enumerate().
The callback that gets passed to PHYSFS_enumerate() is always the same,
but the callback that gets passed through the callback can be different
(if you look at the calling code, you can see that one caller passes
through a normal level metadata callback; the other passes through a zip
file callback).
Furthermore, I've also cleaned it up so that if editorclass::loadZips()
finds a zip file, it won't iterate over all the files in the levels
directory a third time. Instead, the level directory only gets iterated
over twice - once to check for zips, and another to load every level
plus all zips; the second time is when all the heap allocations happen.
And with that, level list loading now uses less STL templated stuff and
much less heap allocations.
Also, ed.directoryList basically has no reason to exist other than being
a temporary std::vector, so I've removed it. This further decreases
memory usage, depending on how many levels you have in your levels
folder (I know that I usually have a lot and don't really ever clean it
up, lol).
Lastly, in the callback passed to PhysFS, `builtLocation` is actually no
longer hardcoded to just the `levels` directory, since instead we now
use the `origdir` variable that PhysFS passes us. So that's good, too.
Wow, there are a lot of these. All of these exit paths now use
VVV_exit() instead, which attempts to save unlock.vvv and settings.vvv,
and also frees all resources so Valgrind is happy. This is a good thing,
because previously unlock.vvv/settings.vvv wouldn't be written to if we
decided to bail for a given reason.
This is just a function that calls the cleanup() in main.cpp, as well as
calls exit().
I would have liked to use SDL_ExitProcess() here, because that function
has ifdefs for different runtime environments. But alas, it's an
internal function and isn't exported. Ah well; exit() seems to be fine
anyway.
If there's a resource that doesn't otherwise need to be cleaned up and
is still alive upon program shutdown, then it should go in cleanup().
This cleans up Screen, GraphicsResources, Graphics buffers, Graphics
tiles, and musicclass audio upon program shutdown.
Even we technically don't NEED to clean these resources up ourselves
(the kernel is going to get rid of all of it anyway, else it'd be a
security problem), I'm doing this because otherwise Valgrind will
complain about these, and then it'd be difficult to see which memory
leaks are real and which are just "well this isn't really a leak but you
haven't freed this thing when the process exited, and that's technically
what a memory leak is".
These are all resources whose cleanup functions can be safely called
even if they haven't initialized anything yet.
It doesn't feel quite write leaving all the buffer creation code in
main(), even though it's perfectly okay to do so and it doesn't result
in any memory mismanagement that Valgrind can report; so I'm factoring
all of it out to a separate function, Graphics::create_buffers().
As a bonus, we no longer have to keep qualifying with `graphics.` in the
buffer creation code, which is nice.
This call to Makebfont() always existed, but ever since 2.3's per-level
custom assets were added, graphics.reloadresources() also calls
graphics.Makebfont(), meaning this call is unnecessary. Calling it twice
results in graphics.bfont and graphics.flipbfont having twice the number
of elements, until custom assets get mounted (or unmounted, technically).
During 2.3 development, there's been a gradual shift to using SDL stdlib
functions instead of libc functions, but there are still some libc
functions (or the same libc function but from the STL) in the code.
Well, this patch replaces all the rest of them in one fell swoop.
SDL's stdlib can replace most of these, but its SDL_min() and SDL_max()
are inadequate - they aren't really functions, they're more like macros
with a nasty penchant for double-evaluation. So I just made my own
VVV_min() and VVV_max() functions and placed them in Maths.h instead,
then replaced all the previous usages of min(), max(), std::min(),
std::max(), SDL_min(), and SDL_max() with VVV_min() and VVV_max().
Additionally, there's no SDL_isxdigit(), so I just implemented my own
VVV_isxdigit().
SDL has SDL_malloc() and SDL_free(), but they have some refcounting
built in to them, so in order to use them with LodePNG, I have to
replace the malloc() and free() that LodePNG uses. Which isn't too hard,
I did it in a new file called ThirdPartyDeps.c, and LodePNG is now
compiled with the LODEPNG_NO_COMPILE_ALLOCATORS definition.
Lastly, I also refactored the awful strcpy() and strcat() usages in
PLATFORM_migrateSaveData() to use SDL_snprintf() instead. I know save
migration is getting axed in 2.4, but it still bothers me to have
something like that in the codebase otherwise.
Without further ado, here is the full list of functions that the
codebase now uses:
- SDL_strlcpy() instead of strcpy()
- SDL_strlcat() instead of strcat()
- SDL_snprintf() instead of sprintf(), strcpy(), or strcat() (see above)
- VVV_min() instead of min(), std::min(), or SDL_min()
- VVV_max() instead of max(), std::max(), or SDL_max()
- VVV_isxdigit() instead of isxdigit()
- SDL_strcmp() instead of strcmp()
- SDL_strcasecmp() instead of strcasecmp() or Win32 strcmpi()
- SDL_strstr() instead of strstr()
- SDL_strlen() instead of strlen()
- SDL_sscanf() instead of sscanf()
- SDL_getenv() instead of getenv()
- SDL_malloc() instead of malloc() (replacing in LodePNG as well)
- SDL_free() instead of free() (replacing in LodePNG as well)
This variable seems to have been intended to make sure
game.savestatsandsettings() was called at the end of the frame, or make
sure that it didn't get called more than once per frame. I don't see any
frame ordering-related reason why it needs to be called specifically at
the end of the frame (the function doesn't modify any state), so it's
more plausible that it was added to make sure it didn't get called more
than one per frame.
However, upon further analysis, none of the code paths where
game.savemystats is used ever calls or sets game.savemystats more than
once, and a majority of the code directly calls
game.savestatsandsettings() anyway, so there's no reason for this
variable to exist. If we ever need to make sure it doesn't get called
more than once, and there's no way to change the code paths around to
prevent it otherwise, we can use the defer callbacks system that I added
to #535, when it gets merged.
This patch cleans up unnecessary exports from header files (there were
only a few), as well as adds the static keyword to all symbols that
aren't exported and are specific to a file. This helps the linker out in
not doing any unnecessary work, speeding it up and avoiding silent
symbol conflicts (otherwise two symbols with the same name (and
type/signature in C++) would quietly resolve as okay by the linker).
Line clipping and second-frame edge-flipping have been broken since #539
was merged (d910c5118d). The cause of this
is moving the onground/onroof code around.
A proper loop order fix is going to come once #535 gets finalized and
merged, so this is a stopgap measure just to make sure people don't
report that line clipping or second-frame edge-flipping are broken in
current builds of 2.3.
This fixes a bug where if you completed a custom level during
command-line playtesting, when returning to the title screen, the
background would be red and the text would be white.
This is because playtesting skips over the code path of pressing ACTION
to start the game and advance to the title screen, and the code path of
that ACTION press specifically initializes the title screen colors to
cyan.
This is also caused by the fact that completing a custom level doesn't
call map.nexttowercolour(), but my guess is that the intent there was
that the player would select a custom level, complete it, and return to
the title screen on the same screen with the same colors, so I decided
not to add a map.nexttowercolour() there.
Instead, I've moved the cyan color initialization to main(), so that it
is always executed no matter what, and doesn't require you to take a
specific code path to do it.
While I was working on #535, I noticed that all the call sites of
script.run() have the exact same code, namely:
if (script.running)
{
script.run();
}
I figured, why not move the script.running check into the function
itself? That way, we won't have to duplicate the check every single
time, and we don't risk forgetting to add the check and causing a bug
because of that.
The check was already duplicated once since 2.0 (it's used in both
GAMEMODE and TELEPORTERMODE), and with the fix of the two-frame delay in
2.3, it's now duplicated twice, leading to THREE instances of this check
in the code, when there should be only one.
In order to be able to fix the bug #556, I'm planning on adding
ScreenSettings* to the settings.vvv write function. However, that
entails adding another argument to Game::savesettings(), which is going
to be really messy given the default argument of Game::savestats().
That, combined with the fact that the code comment at the site of the
implementation of Game::savestats() being wrong (!!!), leads me to
believe that using default function arguments here isn't worth it.
Instead, what I've done is made it so callers are explicit about whether
or not they're calling savestats(), savesettings(), or both at the same
time. If they are calling both at the same time, then they will be using
a new function named savestatsandsettings().
In short, these are the interface changes:
* bool Game::savestats(bool) has been removed
* bool Game::savestatsandsettings() has been added
* void Game::savestats_menu() has been renamed to
void Game::savestatsandsettings_menu()
* All previous callers of bool Game::savestats() are now using bool
Game::savestatsandsettings()
* The one caller of bool Game::savestats(bool) is now using bool
Game::savestats()
While there already exists an option to skip the fake loading screen
entirely (without requiring an ACTION press), there are several reasons
for including this option as well:
* So people upgrading from 2.2 won't have to sit through the fake
loading screen the first time they open 2.3.
* So if people are too lazy to use the existing option, they can use
this one instead.
* So tool-assisted speedruns (TASes) of this game can skip the fake
loading screen without requiring an existing settings.vvv beforehand.
This last one is the biggest reason for me, since I'm not sure what
TASVideos.org rules are regarding existing save files, but with this
change nobody has to worry about their rules and can safely just
press ACTION to skip the fake loading screen automatically.
As part of fixing #464, I'll need to move these pieces of code around
easily. In #220 I just kind of shoved them awkwardly in whatever
fixed function would be last called in the gamestate loop, which I
shouldn't have done as I've now had to make formal fixed-render
functions anyway. Because these fixed functions need to be called
directly before a render function, and I'm fixing the order to put
render functions in their proper place, so I need to be able to move
these around easily, and making them function calls instead of inlined
makes them easier to manipulate.
game.gameframerate seems to exist for converting the value of
game.slowdown into an actual timestep value, when really the timestep
value should just use game.slowdown directly with a fast lookup table.
Otherwise, there's a bunch of duplicated game.slowdown case-switches
everywhere, which adds up to a large, annoying pile should the values be
changed in the future. But now the duplicate variable has been removed,
and with it, all the copy-pasted case-switches.
Also, the game speed text rendering in Menu::accessibility and
Menu::setslowdown has been factored out to a function and de-duplicated
as well.
There were some duplicate Screen configuration variables that were on
Game, when there didn't need to be.
- game.fullScreenEffect_badSignal is a duplicate of
graphics.screenbuffer->badSignalEffect
- game.fullscreen is a duplicate of !graphics.screenbuffer->isWindowed
- game.stretchMode is a duplicate of graphics.screenbuffer->stretchMode
- game.useLinearFilter is a duplicate of
graphics.screenbuffer->isFiltered
These duplicate variables have been removed now.
I put indentation when handling the ScreenSettings struct in main() so
the local doesn't live for the entirety of main() (which is the entirety
of the program).
The game previously did this dumb thing where it lumped in all its
settings with its file that tracked your records and unlocks,
`unlock.vvv`. It wasn't really an issue, until 2.3 came along and added
a few settings, suddenly making a problem where 2.3 settings would be
reset by chance if you decided to touch 2.2.
The solution to this is to move all settings to a new file,
`settings.vvv`. However, for compatibility with 2.2, settings will still
be written to `unlock.vvv`.
The game will prioritize reading from `settings.vvv` instead of
`unlock.vvv`, so if there's a setting that's missing from `unlock.vvv`,
no worries there. But if `settings.vvv` is missing, then it'll read
settings from `unlock.vvv`. As well, if `unlock.vvv` is missing, then
`settings.vvv` will be read from instead (I explicitly tested for this,
and found that I had to write special code to handle this case,
otherwise the game would overwrite the existing `settings.vvv` before
reading from it; kids, make sure to always test your code!).
Closes#373 fully.
Instead of using the same tower buffer that gets used for towers, use a
separate buffer instead so there's no risk of stepping on the tower
buffer's toes at the wrong point in time.
This commit combined with the previous one fixes#369.
With the previous commit in place, we can now simply move some usages of
the previous towerbg to use a separate object instead. That way, we
don't have to mess with a monolithic state, or some better way to phrase
what I just said, and we instead have two separate objects that can
coexist side-by-side.
Previously, the tower background was controlled by a disparate set of
attributes on Graphics and mapclass, and wasn't really encapsulated. (If
that's what that word means, I don't particularly care about
object-oriented lingo.) But now, all relevant things that a tower
background has has been put into a TowerBG struct, so it will be easy to
make multiple copies without having to duplicate the code that handles
it.
I was investigating a desync in my Nova TAS, and it turns out that
the gravity line collision functions check for the `oldxp` and `oldyp`
of the player, i.e. their position on the previous frame, along with
their position on the current frame. So, if the player either collided
with the gravity line last frame or this frame, then the player collided
with the gravity line this frame.
Except, that's not actually true. It turns out that `oldxp` and `oldyp`
don't necessarily always correspond to the `xp` and `yp` of the player
on the previous frame. It turns out that your `oldyp` will be updated if
you stand on a vertically moving platform, before the gravity line
collision function gets ran. So, if you were colliding with a gravity
line on the previous frame, but you got moved out of there by a
vertically moving platform, then you just don't collide with the gravity
line at all.
However, this behavior changed in 2.3 after my over-30-FPS patch got
merged (#220). That patch took advantage of the existing `oldxp` and
`oldyp` entity attributes, and uses them to interpolate their positions
during rendering to make everything look real smooth.
Previously, `oldxp` and `oldyp` would both be updated in
`entityclass::updateentitylogic()`. However, I moved it in that patch to
update right before `gameinput()` in `main.cpp`.
As a result, `oldyp` no longer gets updated whenever the player stands
on a vertically moving platform. This ends up desyncing my TAS.
As expected, updating `oldyp` in `entityclass::movingplatformfix()` (the
function responsible for moving the player whenever they stand on a
vertically moving platform) makes it so that my TAS syncs, but the
visuals are glitchy when standing on a vertically moving platform. And
as much as I'd like to get rid of gravity lines checking for whether
you've collided with them on the previous frame, doing that desyncs my
TAS, too.
In the end, it seems like I should just leave `oldxp` and `oldyp` alone,
and switch to using dedicated variables that are never used in the
physics of the game. So I'm introducing `lerpoldxp` and `lerpoldyp`, and
replacing all instances of using `oldxp` and `oldyp` that my over-30-FPS
patch added, with `lerpoldxp` and `lerpoldyp` instead.
After doing this, and applying #503 as well, my Nova TAS syncs after
some minor but acceptable fixes with Viridian's walkingframe.
Previously, setting the actual volume of the music was all over the
place. Which isn't bad, but when I added being able to press N to mute
the music specifically, I should've made it so that there would be a
volume variable somewhere that the game looks at if the music is
unmuted, and otherwise sets the actual volume to 0 if the game is muted.
This resulted in things like #400 and #505 and having to add a bunch of
special-cased checks like game.musicmuted and game.completestop. But
instead of adding a bunch of special-case code, just make it so there's
a central place where Mix_VolumeMusic() actually gets called, and if
some piece of code wants to set the music volume, they can set
music.musicVolume. But the music handling logic in main.cpp gets the
final say on whether to listen to music.musicVolume, or to mute the game
entirely.
This is how the music handling code should have been from the start
(when pressing N to mute the music was added).
Fixes#505.
After looking at pull request #446, I got a bit annoyed that we have TWO
variables, key.textentrymode and ed.textentry, that we rolled ourselves
to track the state of something SDL already provides us a function to
easily query: SDL_IsTextInputActive(). We don't need to have either of
these two variables, and we shouldn't.
So that's what I do in this patch. Both variables have been axed in
favor of using this function, and I just made a wrapper out of it, named
key.textentry().
For bonus points, this gets rid of the ugly NO_CUSTOM_LEVELS and
NO_EDITOR ifdef in main.cpp, since text entry is enabled when entering
the script list and disabled when exiting it. This makes the code there
easier to read, too.
Furthermore, apparently key.textentrymode was initialized to *true*
instead of false... for whatever reason. But that's gone now, too.
Now, you'd think there wouldn't be any downside to using
SDL_IsTextInputActive(). After all, it's a function that SDL itself
provides, right?
Wrong. For whatever reason, it seems like text input is active *from the
start of the program*, meaning that what would happen is I would go into
the editor, and find that I can't move around nor place tiles nor
anything else. Then I would press Esc, and then suddenly become able to
do those things I wanted to do before.
I have no idea why the above happens, but all I can do is to just insert
an SDL_StopTextInput() immediately after the SDL_Init() in main.cpp. Of
course, I have to surround it with an SDL_IsTextInputActive() check to
make sure I don't do anything extraneous by stopping input when it's
already stopped.
So, earlier in the development of 2.0, Simon Roth (I presume)
encountered a problem: Oh no, all my backgrounds aren't appearing! And
this is because my foregroundBuffer, which contains all the drawn tiles,
is drawing complete black over it!
So he had a solution that seems ingenius, but is actually really really
hacky and super 100% NOT the proper solution. Just, take the
foregroundBuffer, iterate over each pixel, and DON'T draw any pixel
that's 0xDEADBEEF. 0xDEADBEEF is a special signal meaning "don't draw
this pixel". It is called a 'key'.
Unfortunately, this causes a bug where translucent pixels on tiles
(pixels between 0% and 100% opacity) didn't get drawn correctly. They
would be drawn against this weird blue color.
Now, in #103, I came across this weird constant and decided "hey, this
looks awfully like that weird blue color I came across, maybe if I set
it to 0x00000000, i.e. complete and transparent black, the issue will be
fixed". And it DID appear to be fixed. However, I didn't look too
closely, nor did I test it that much, and all that ended up doing was
drawing the pixels against black, which more subtly disguised the
problem with translucent pixels.
So, after some investigation, I noticed that BlitSurfaceColoured() was
drawing translucent pixels just fine. And I thought at the time that
there was something wrong with BlitSurfaceStandard(), or something.
Further along later I realized that all drawn tiles were passing through
this weird OverlaySurfaceKeyed() function. And removing it in favor of a
straight SDL_BlitSurface() produced the bug I mentioned above: Oh no,
all the backgrounds don't show up, because my foregroundBuffer is
drawing pure black over them!
Well... just... set the proper blend mode for foregroundBuffer. It
should be SDL_BLENDMODE_BLEND instead of SDL_BLENDMODE_NONE.
Then you don't have to worry about your transparency at all. If you did
it right, you won't have to resort this hacky color-keying business.
*sigh*
For some reason, the cursor would be either disabled and re-enabled if
you switched to windowed mode, or it would be always enabled if you
switched to fullscreen mode. This only happened when you toggled
fullscreen using the Alt+Enter, Alt+F, or F11 keybinds, and the
fullscreen option in graphic options doesn't have this problem.
This cursor toggling business seems like an arcane incantation back in
the days of SDL1.2, now since no longer necessary with SDL2. However,
after some testing, it seems like removing these indecipherable runes
don't cause any harm, so I'm going to remove them.
Fixes#371.
Achievements could be unlocked in custom levels/make and play, so this adds the wrapper function `game.unlockAchievement` which calls `NETWORK_unlockAchievement` if `map.custommode` is false.
Also, this function and `Game::unlocknum` have both been `ifdef`ed to be empty if MAKEANDPLAY is defined.
Okay, so basically here's the include layout that this game now
consistently uses:
[The "main" header file, if any (e.g. Graphics.h for Graphics.cpp)]
[blank line]
[All system includes, such as tinyxml2/physfs/utfcpp/SDL]
[blank line]
[All project includes, such as Game.h/Entity.h/etc.]
And if applicable, another blank line, and then some special-case
include screwy stuff (take a look at editor.cpp or FileSystemUtils.cpp,
for example, they have ifdefs and defines with their includes).
Including a header file inside another header file means a bunch of
files are going to be unnecessarily recompiled whenever that inner
header file is changed. So I minimized the amount of header files
included in a header file, and only included the ones that were
necessary (system includes don't count, I'm only talking about includes
from within this project). Then the includes are only in the .cpp files
themselves.
This also minimizes problems such as a NO_CUSTOM_LEVELS build failing
because some file depended on an include that got included in editor.h,
which is another benefit of removing unnecessary includes from header
files.
Whoops.
Noticed this earlier when I was merging upstream back into VCE, and
interestingly enough, it doesn't look like cppcheck warns about
undeffing a non-existent define.
This patch optimizes the loop used to limit the framerate in 30-FPS-only
mode so that it uses SDL_Delay() instead of an accumulator. This means
that the game will take up less CPU power in 30-FPS-only mode. This also
means that the game loop code has been simplified, so there's only two
while-loops, and only two places where game.over30mode is checked, thus
leading to easier-to-understand logic.
Using an accumulator here would essentially mean busywaiting until the
34 millisecond timer was up. (The following is just what leo60228 told
me.) Busywaiting is bad because it's inefficient. The operating system
assumes that if you're busywaiting, you're performing a complex
calculation and handles your process accordingly. And this is why
sleeping was invented, so you could busywait without taking up
unnecessary CPU time.
There's a bug where playtesting from Ved doesn't properly play the music
of the level, due to no fault with Ved.
This was because the music was being faded out by
scriptclass::startgamemode() case 23 after main() called music.play().
To fix this, just call music.play() when all the other variables are
being set in Game::customloadquick().
The problem we're running into is entirely contained in the Screen - we need to
either decouple graphics context init from Screen::init or we need to take out
the screenbuffer interaction from loadstats (which I'm more in favor of since we
can just pull the config values and pass them to Screen::init later).
Now that you have a mini menu in MAPMODE, it's a bit annoying to have to
deal with the slowed-down timestep when pressing left/right/ACTION
inside it. Especially since going to an options menu restores the
timestep back to normal (because it's in TITLEMODE). Also removed it
from TELEPORTERMODE for consistency.
The Alt+Enter Glitch is a funny glitch where if you press any toggle
fullscreen keybind during a cutscene, Viridian will stop moving (if
they're being moved by a walk()) and ACTION will start being held down
for them. Meaning in most cases you can interrupt a walk and flip at the
same time.
This can obviously break cutscenes if a casual just wants to toggle
fullscreen, so I'm fixing it. But it will be unfixed in glitchrunner
mode in case you want to glitch out custom levels (I know I do).
More information on the Alt+Enter Glitch is available here:
https://gitgud.io/infoteddy/vvvvvv-knowledge/blob/master/bugs/bugs.md#the-altenter-glitch
(The page is a bit outdated, some bugs have been fixed in 2.3 already.)
This patch is very kludge-y, but at least it fixes a semi-noticeable
visual issue in custom levels that use internal scripts to spawn
entities when loading a room.
Basically, the problem here is that when the game checks for script
boxes and sets newscript, newscript has already been processed for that
frame, and when the game does load a script, script.run() has already
been processed for that frame.
That issue can be fixed, but it turns out that due to my over-30-FPS
game loop changes, there's now ANOTHER visible frame of delay between
room load and entity creation, because the render function gets called
in between the script being loaded at the end of gamelogic() and the
script actually getting run.
So... I have to temporary move script.run() to the end of gamelogic()
(in map.twoframedelayfix()), and make sure it doesn't get run next
frame, because double-evaluations are bad. To do that, I have to
introduce the kludge variable script.dontrunnextframe, which does
exactly as it says.
And with all that work, the two-frame (now three-frame) delay is fixed.
In my previous PR, I wrongly assumed that I could just replace the `i`
handling code of those options with an `i++;` at the beginning, and thus
I could put all blocks' `i++;` into ARG_INNER(). Well I was wrong,
because the code was written the original way for a reason, namely that
we still need `i` to point to the -playx/y/rx/ry/gc/music argv so we can
re-compare which argument led us into this code block.
Just to be helpful if someone has a failing FILESYSTEM_init(), but
doesn't know that's their issue and keeps wondering why VVVVVV just
exits with code 1.
The command-line argument parsing code has a lot of copy-paste. This
copy-paste would get even worse if I added safety checks to make sure
you couldn't index argv out-of-bounds by having an argument like
`-renderer` without having anything after it, i.e. you'd be doing the
command `./VVVVVV -renderer`.
Previously, only the playtest arguments (apart from the recently-added
`playassets`) had this safety check, but the message it printed whenever
the safety check failed was always "-playing option requires one
argument" regardless of whatever argument actually failed to be parsed.
So I fixed it so that all arguments actually output the correct
corresponding failed argument instead.
Also, `strcmp(argv[i], <name>) == 0` is really kind of noisy, even if
you understand what it does perfectly well.
So I refactored it with a bunch of macros. ARG() just does the strcmp()
char* comparison, and ARG_INNER() does the safety check and returns 1,
along with printing a message, if the safety check fails.
This is used if you're loading a level file from STDIN. The game needs
to know the actual level assets directory you're referring to, since
when it gets the level from STDIN, it doesn't know the actual filename
of the level.
Fixes#309.
Ugh, this is terrible and stupid and I hate myself for it.
Anyway, since the SDL2 VSync hint only applies when the renderer is
created, we have to re-create the renderer whenever VSync is toggled.
However, this also means we need to re-create m_screenTexture as well,
AND call ResizeScreen() after that or else the letterbox/integer modes
won't be applied.
Unfortunately, this means that in main(), gameScreen.init() will create
a renderer only to be destroyed later by graphics.processVsync().
There's not much we can do about this. Fixing this would require putting
graphics.processVsync() before gameScreen.init(). However, in order to
know whether the user has VSync set, we would have to call
game.loadstats() first, but wait, we can't, because game.loadstats()
mutates gameScreen! Gahhhhhh!!!!
@leo60228 suggested to fix that problem (
https://github.com/TerryCavanagh/VVVVVV/pull/220#issuecomment-624217939
) by adding NULL checks to game.loadstats() and then calling it twice,
but then you're trading wastefully creating a renderer only to be
destroyed, for wastefully opening and parsing unlock.vvv twice instead
of once. In either case, you're doing something twice and wasting work.
Otherwise a NO_CUSTOM_LEVELS build would fail. Also I got rid of the
'graphics.flipmode = false;' in the fixed loop because I don't think it
does anything.
This is needed for the next step. I want to put all the loop stuff in
their own functions so the code isn't one huge blob, but to do that I'll
need to make 'time' a global variable, but I can't do that because
actually 'time' is already a function, apparently, and you're only
allowed to shadow variables when already inside a function.
This is to make sure no lerping occurs in 30-FPS mode, otherwise things
might look weird. A good case that this fixes is how entities look in a
double-gotoroom (they should be completely frozen in 30-FPS mode).
There is now an option in "graphic options" named "toggle fps", which
toggles whether the game visually runs at 1000/34 FPS or over 1000/34
FPS. It is off by default.
I've had to put the entire game loop in yet another set of braces, I'll
indent it next commit.
This is because otherwise, on my Linux system at least, the game will
take up a lot of CPU that it doesn't really need to (I only have a 60hz
monitor).
On Windows, it looks like Windows already enforces V-sync for
applications anyway, unless they have exclusive fullscreen control.
Linux doesn't enforce V-sync on apps and lets them take up as much CPU
as they want, so I'm putting this here to limit the framerate.
The game is already actually 30 FPS anyway, the nice smooth FPS is just
visual. V-sync won't introduce any more "input lag" than already exists.
As much as it looks cool to have a slowly-scrolling background on the
title screen, it's quite annoying that slowmode applying on the title
screen mean that your keypresses are less responsive.
To fix this, I draw another row/column of incoming textures. But of
course, I have to extend the size of the towerbuffer, otherwise the
incoming textures will just be gone.
This has to be done in order to fix rendering when on a conveyor or
moving platform and actively moving with or against it. Pretty sure this
shouldn't break anything, oldxp/oldyp is mostly visual after all (and by
the time it's used for gravity line collision checking,
updateentitylogic() would've already gotten around to it anyway).
Incidentally, this also fixes a jitter that would occur if you were
moving at the time you died or collected a trinket or custom crewmate,
due to the game temporarily freezing and either doing deathsequence or
completestop.
Otherwise the screen will shake too fast for my liking.
Also I'm planning to add an FPS limiting option later (because right
now, un-capping the FPS is pretty wasteful and eats up lots of
resources, especially since I have only a 60hz monitor), and it'd feel
weird if screen shaking updated every delta timestep.
I've added a function Graphics::lerp() which simply interpolates between
two values given a certain alpha value. It's just like drawing a
straight line between two points.
Also, Graphics now has an `alpha` attribute, and it is set on every
deltatime update to be used in linear interpolation.
Ok, and this is where the fun starts.
In an ideal world, this would be the end of this patch. However, of
course, there are many, MANY places in the game that update
fixed-timestep timers DIRECTLY inside the render function, which is not
ideal because it means those timers go super fast.
I'll have to fix those later.
Ok, NOW indent it. I didn't indent it previously because the diffs are
annoying to read if there's an indent that doesn't otherwise change
anything (and even now it's pretty annoying to read).
Alright, this is the start of the over-30-FPS patch!
First things first, we'll need to make it possible to have a separate
deltatime loop outside of the fixed timestep loop. And for that, we
can't be using SDL_Delay(), as SDL_Delay() (as you might imagine) blocks
the whole program.
Instead we'll be using this thing called an accumulator. It looks at how
long the previous poll took (the raw deltatime), and lets timesteps pass
accordingly.
On a side note, I've had to split the `time` and `timePrev` declaration
each onto their own separate line, otherwise there's undefined behavior
from `time` not being initialized.
I use `accumulator = fmodf(...)` instead of `accumulator -=
timesteplimit` because otherwise it'll fast-forward if it's behind,
which is a jarring thing to see.
Also in preparation for what's going to come down the over-30-FPS road,
I've also added `deltatime` and `alpha`. `deltatime` is going to be used
if the game is in slowdown mode, and `alpha` is going to be used for
linear interpolation of animations.
By the way, what was the main game loop previously (and is now the new
timestep loop) is now in an extra set of curly braces, but I haven't
indented it yet to reduce the noise in this commit.
A few months ago, I added ghosts to the VVVVVV: Community Edition editor. I was told recently I should think
about upstreaming it, and with Terry saying go ahead I finally ported them into VVVVVV. There's one slight
difference however--you can choose whether you have them or not in the editor's settings menu. They're off by
default, and this is saved to the save file.
Anyway, when you're playtesting, the game saves the players position, color, room coordinates and sprite every 3
frames. The max is 100, where if it tries to add more, the oldest one gets removed.
When you exit playtesting, the saved positions appear one at a time, and you can use the Z key to speed it up.
[Here's a video of them in action.](https://o.lol-sa.me/4H21zCv.mp4)
Main game would retain custom level assets, now fixed. Also, custom fonts load properly. Finally, levels can be stored as a zip and placed in the levels folder, with the .vvvvvv file at the root of the zip and custom asset folders (graphics, sounds etc) also at the root.
Blackout mode doesn't work properly, because the game doesn't actually
black out the screen, it merely stops drawing things. Oh and only some
things at that, some other things are still drawn. This results in a
freeze-frame effect, which is apparently fixed in the Switch version.
Custom levels utilize this freeze-frame effect, so it's a bit annoying
that the "Game paused" screen draws on top of it and makes it so that
the freeze-frame freezes on "Game paused" until blackout is turned off.
So I'm making it so that "Game paused" doesn't get drawn in blackout
mode. However it will still do graphics.render() because otherwise it'll
just result in a black screen.
The code to decrement the timers for flashing and shaking is now handled
outside the game-gamestate case-switch, instead of having to be
duplicated inside each render function.
As a bonus, I made it so the timer decrements even if screen effects are
disabled. This is to prevent any theoretical situation where the timer
can "pile up" due to disabled screen effects not letting it tick down.
This removes a lot of duplicate code, which towerrender() mostly
consisted of, even though the only difference is that it draws a
separate map and screen edge spikes are drawn.
Looks like I forgot to test that my music silencing patch didn't break
the music being silent during the "You have found a shiny trinket" and
"You have found a shiny crewmate" text boxes. So I've added a check for
game.completestop in the music handling in main.cpp.
Found this bug while I was testing my towerlogic/gamelogic merge patch.
It looks like one bracket got out-of-place for whatever reason. This
doesn't affect the case-switch at all, due to how case-switches work,
but it's still weird to look at.
Indentation has been updated accordingly.
Some custom levels have their own custom music and sync that music to
scripted cutscenes, which is actually pretty impressive. However,
they've always run into a small thorn, which is that you can easily
desync the music by unfocusing the game, because the audio will keep
playing when the game is unfocused.
This should remove that thorn by pausing the audio on unfocus, and
resuming when focused, so that the music can no longer desync, but you
can still pause the game by unfocusing it.
This is yet another feature in VCE that hasn't been upstreamed until
now.
It looks like this variable was originally intended to keep track of th
volume of the game, but then it was used as a boolean in main.cpp to
make sure the game didn't call Mix_Volume() and Mix_VolumeMusic() every
frame.
However, it is now a problem, because I put the music mute handling code
in the very branch that game.globalsound protects against, but since
game.globalsound is here, if I mute the music, then mute the whole game,
then unmute the music, and then unmute the whole game, sound effects
will no longer be muted but the music will still be muted, until I mute
and unmute the whole game again. This is annoying and inconsistent, so
I'm removing this check from the 'if (!game.muted)' branch.
Plus, given that the Mix_VolumeMusic() and Mix_Volume() calls happen
every frame if the game is muted anyways, it doesn't seem to be a
problem to call these every frame.
These do basically nothing. The only time they're used is
getGlobalSound() in an if-statement in main.cpp, but all that
if-conditional does is call setGlobalSound() anyway, which is something
that doesn't really have any side effects. So I'm removing these vars to
simplify the code.
This is for people who want to use their own soundtrack while playing
the game, but who don't want to mute the sound effects as well.
This feature was added to VCE, but it was added in the strangest way. It
was made an option in "game options" instead of being a keybind, and I
don't know why.
Most of the code was already commented out, and those comments were
removed in earlier commits, but this removes all recording variables
from Game and simplifies the game-gamestate handling in main.cpp a
little bit.
This removes all global args in all functions in titlerender.cpp.
Additionally, all 'dwgfx' has been renamed to 'graphics' in that file
(there are a lot of them, as you might guess).
This commit removes the passing around of global args in the logic
functions. Additionally, all 'dwgfx' has been replaced with 'graphics'
in Logic.cpp.
This removes global arg passing from all functions on editorclass.
Callers have been updated correspondingly. Additionally, all 'dwgfx' has
been replaced with 'graphics' in editor.cpp.
This commit removes all global args from the parameters of each function
on the scriptclass object, and updates all places they are called
accordingly. It also changes all instances of 'dwgfx' to 'graphics' in
Script.cpp.
Interestingly enough, it looks like editor.h depended on Script.h's
class define of the musicclass. I've temporarily placed the class define
in editor.h, but by the end of this patchset it'll be gone.
I've decided to call dwgfx/game/map/obj/key/help/music the "global args".
Because they're essentially global variables that are being passed
around in args.
This commit removes global args from all functions on the Game class,
and deals with updating the callsites of said functions accordingly. It
also renames all usages of 'dwgfx' in Game.cpp to 'graphics', since the
global variable is called 'graphics' now.
Interesting to note, I was removing the class defines from Game.h, but
it turns out that Graphics.h depends on the mapclass and entityclass
defines from Game.h. And also Graphics.h spelled mapclass wrong (it
forgot the "class") so I just decided to use that existing line instead.
This is only temporary and after all is said and done, at the end of
this pull request those class defines will be gone.
Instead of passing the error codes out of the function, just handle the
errors directly as they happen, and fail gracefully if something goes
wrong instead of continuing.
Whenever you would press Alt+Enter, or Alt+F, or on macOS Command+Enter,
or on macOS Command+F, or F11, the game would print this useless error
message to console, every single time: "Error: failed: " and it would
concatenate SDL_GetError() after it, but most of the time SDL_GetError()
is blank, so it would print just that.
Instead, what the fullscreen shortcut will now do is check the result of
the relevant SDL functions, BEFORE it decides to print an error message.
And when it DOES print an error message, it will be less vague and will
say instead "Error: toggling fullscreen failed: <output of
SDL_GetError()>".
This means Screen::ResizeScreen() and Screen::toggleFullScreen() are now
int-returning functions. Ideally, every function interfacing with SDL
would return an error code, but that's too much for this simple patch.
Additionally, I took the opportunity to clean up the surrounding
formatting of the code a bit, most notably dedenting the
keypress-clearing stuff by one tab level, converting the
shortcut-handling code to spaces, and removing commented-out code.
If you Alt+Tabbed while in fullscreen mode, the game would stay in
fullscreen instead of switching to windowed, but there was a chance it
would EITHER use the same internal resolution which would mismatch the
window resolution (don't know when exactly this happens, but still) and
stay being in an actual windowed mode, OR switch between
fullscreen/windowed every other time you re-focused the window, which is
annoying.
Now, whenever you Alt+Tab in fullscreen, the game will be in windowed
mode, and then when you re-focus it will go back to fullscreen.
Consistently.
Previously, the only way to guarantee that the game actually saved your
unlock.vvv after changing an option, was to ensure you pressed ACTION on
the "quit game" menu option.
This makes Alt+F4 graceful in that pressing it will also save
unlock.vvv, as it should. Now truly UN-graceful ways of exiting the
game, such as SIGSEGV, SIGABRT, or pkill -9 or pkill -15 will not save
unlock.vvv, as should be the case.
This turns the array 'edentity' into a proper vector, and removes the need to
use a separate length-tracking variable and manually keep track of the actual
amount of edentities in the level by using the long-winded
'EditorData::GetInstance().numedentities'. This manual tracking was more
error-prone and much less maintainable.
editorclass::naddedentity() has been removed due to now functionally being the
same as editorclass::addedentity() (there's no more
'EditorData::GetInstance().numedentities' to not increment) and for also being
unused in the first place.
editorclass::copyedentity() has been removed because it was only used to shift
the rest of the edentities up manually, but now that we let C++ do all the
hard work it's no longer necessary.
This is useful for distributions, which may not want to put data.zip in
the same directory as the binary. This can't be distribution-specific
due to the license ("Altered source/binary versions must be plainly
marked as such, and must not be misrepresented as being the original
software.").
This commit makes `help`, `graphics`, `music`, `game`, `key`, `map`, and
`obj` essentially static global objects that can be used everywhere.
This is useful in case we ever need to add a new function in the future,
so we don't have to bother with passing a new argument in which means we
have to pass a new argument in to the function that calls that function
which means having to pass a new argument into the function that calls
THAT function, etc. which is a real headache when working on fan mods of
the source code.
Note that this changes NONE of the existing function signatures, it
merely just makes those variables accessible everywhere in the same way
`script` and `ed` are.
Also note that some classes had to be initialized after the filesystem
was initialized, but C++ would keep initializing them before the
filesystem got initialized, because I *had* to put them at the top of
`main.cpp`, or else they wouldn't be global variables.
The only way to work around this was to use entityclass's initialization
style (which I'm pretty sure entityclass of all things doesn't need to
be initialized this way), where you actually initialize the class in an
`init()` function, and so then you do `graphics.init()` after the
filesystem initialization, AFTER doing `Graphics graphics` up at the
top.
I've had to do this for `graphics` (but only because its child
GraphicsResources `grphx` needs to be initialized this way), `music`,
and `game`. I don't think this will affect anything. Other than that,
`help`, `key`, and `map` are still using the C++-intended method of
having ClassName::ClassName() functions.
FillRect() is similar enough to memset when blending isn't used, so the
game will take a fast path drawing the roomname background when the
background is opaque.
The roomname background used to just be a simple SDL_Rect that was drawn
using SDL_FillRect with a color of 0. Unfortunately, it seems that you
cannot use transparent colors with SDL_FillRect, it just defaults to
being fully opaque. However, you CAN draw surfaces with translucency,
which seems like the easiest thing to do. But the first step is to
convert the roomname background to an SDL_Surface.
This replaces the FillRect()s with SDL_BlitSurface() in the three places
roomnames are drawn: in towerrender, in gamerender, and in editorrender.
There is a long-standing bug with the script editor where if you delete
the last character of a line, it IMMEDIATELY deletes the line you're on,
and then moves your cursor back to the previous line. This is annoying,
to say the least.
The reason for this is that, in the sequence of events that happens in
one frame (known as frame ordering), the code that backspaces one
character from the line when you press Backspace is ran BEFORE the code
to remove an empty line if you backspace it is ran. The former is
located in key.Poll(), and the latter is located in editorinput().
Thus, when you press Backspace, the game first runs key.Poll(), sees
that you've pressed Backspace, and dutifully removes the last character
from a line. The line is now empty. Then, when the game gets around to
the "Are you pressing Backspace on an empty line?" check in
editorinput(), it thinks that you're pressing Backspace on an empty
line, and then does the usual line-removing stuff.
And actually, when it does the check in editorinput(), it ACTUALLY asks
"Are you pressing Backspace on THIS frame and was the line empty LAST
frame?" because it's checking against its own copy of the input buffer,
before copying the input buffer to its own local copy. So the problem
only happens if you press and hold Backspace for more than 1 frame.
It's a small consolation prize for this annoyance, getting to
tap-tap-tap Backspace in the hopes that you only press it for 1 frame,
while in the middle of something more important to do like, oh I don't
know, writing a script.
So there are two potential solutions here:
(1) Just change the frame ordering around.
This is risky to say the least, because I'm not sure what behavior
depends on exactly which frame order. It's not like it's key.Poll()
and then IMMEDIATELY afterwards editorinput() is run, it's more
like key.Poll(), some things that obviously depend on key.Poll()
running before them, and THEN editorinput(). Also, editorinput() is
only one possible thing that could be ran afterwards, on the next
frame we could be running something else entirely instead.
(2) Add a kludge variable to signal when the line is ALREADY empty so
the game doesn't re-check the already-empty line and conclude that
you're already immediately backspacing an empty line.
I went with (2) for this commit, and I've added the kludge variable
key.linealreadyemptykludge.
However, that by itself isn't enough to fix it. It only adds about a
frame or so of delay before the game goes right back to saying "Oh,
you're ALREADY somehow pressing backspace again? I'll just delete this
line real quick" and the behavior is basically the same as before,
except now you have to hit Backspace for TWO frames or less instead of
one in order to not have it happen.
What we need is to have a delay set as well, when the game deletes the
last line of a char. So I set ed.keydelay to 6 as well if editorinput()
sses that key.linealreadyemptykludge is on.
Hiding the mouse cursor does makes sense in a lot of situations I agree, but it's very much a preference thing, and I don't see a good reason to change the original behavour. Some people (i.e. me) don't like cursors disappearing in windowed mode when you move the cursor over the screen, but most importantly, it makes the editor much less pleasant to use (since you're relying on the 30fps editor cursor box).
I'd be happy to support, say, a setting that allowed you to disable the mouse cursor, or even a 15 second time-out which makes the cursor disappear if not moved (and reappear once moved), but just having it off by default feels wrong to me.
This disables being able to press M to mute while editing a script in
the script editor. It also disables it in the script list, too, but I'm
hoping no one thinks that's an issue, because I personally don't think
it is.
