This makes it easier to add bounds checks to all accesses of
map.explored. Also, all manually-written existing bounds checks have
been removed, because they're going to go into the new getters and
setters.
The getter is mapclass::isexplored() and the setter is
mapclass::setexplored().
It is no longer possible to cause Undefined Behavior via accessing
out-of-bounds room properties.
What happens instead is - if you attempt to fetch an out-of-bounds room
property, you get a "blank" room property that just has all of the
defaults, plus its tileset is 1 because all tilesets that are nonzero
use tiles2.png, and it closely emulates the previous behavior where it
was some bogus value but definitely not zero. Its Direct Mode is also 1,
because the tiles contained within it are just mishmashed repeats of
existing tiles on the map, and we shouldn't autotile that.
The roomname also gets cleared in case the user attempts to set the room
name of an out-of-bounds room property.
If you attempt to set the property of an out-of-bounds room property,
then nothing happens.
This replaces all raw ed.level accesses with new setter and getter
funcs, which makes it easier to add bounds checks later. And I've also
removed all the manually-written bounds checks, since they will go into
the new getter and setter.
To get the room properties of a specific room, you use
editorclass::getroomprop(), which returns a pointer to the room
properties - then you just read off of that pointer. To set a room
property, you use editorclass::setroom<PROP>(), where <PROP> is the name
of the property. These are maintained using X macros to avoid
copy-pasting. editorclass::getroompropidx() is a helper function and
shouldn't be used directly.
This removes all traces of Undefined Behavior from getting and placing
tiles.
This mimics the previous behavior (2.2 and below) as reasonably as
possible. `vmult` was previously a vector, there was a bunch of unused
space directly after the end of the usable space of the vector, which
was all filled with zeroes. The same goes for `contents`, having
previously been a vector, and so having a bunch of zeroes immediately
following the end of the in-bounds space. That's why both are 0 if you
index them out of bounds.
This makes it easier to add bounds checks to all accesses of
ed.contents.
To do this, I've added editorclass::gettile(), editorclass::settile(),
and editorclass::getabstile() (with a helper function of
editorclass::gettileidx() that really shouldn't be used directly), and
replaced all raw accesses of ed.contents with those functions
appropriately.
This also makes the code more readable, as a side effect.
The existing bounds checks were correct sometimes but other times were
not.
The bounds check for 2x2 and 2x1 sprites only covered the top-left
sprite drawn; the other sprites could still be out of bounds. But if the
top-left sprite was out of bounds, then none of the other sprites
wouldn't be drawn - although it ought to be that the other sprites still
get attempted to be drawn. So I've updated the bounds checks
accordingly, and now an out of bounds top-left sprite won't prevent the
drawing of the rest of the sprites.
Similarly, if the sprite of a Gravitron square was out of bounds, that
would prevent its indicators from being drawn. But the indicators
weren't being bounds-checked either (2.3 lets you have less than 1200
tiles in a given tilesheet). So the bounds check has been moved to only
cover the drawframe and the indicator indexes accordingly, and an out of
bounds sprite won't prevent attempting to draw the indicators.
It is possible for any of the QueryIntAttribute()s to fail, most
commonly if the attributes don't exist. If that happens, then that part
of the temporary edentity won't be initialized, and we'll end up having
a partially-uninitialized edentity - then doing much of anything with it
will result in undefined behavior.
To fix this, just initialize the temporary edentity.
If an XML tag doesn't contain anything inside, pText will be NULL. If
that happens without being checked, then NULL will be passed to
SDL_strcmp(). SDL_strcmp() will either call libc strcmp() or use its own
implementation; both implementations will still dereference the NULL
without checking it.
This is undefined behavior, so I'm fixing it. The solution is to do what
is done with all other XML parsing functions, and to make sure pText
gets set to a safe empty string (which is just a pointer to a null
terminator) if it happens to be NULL.
PR #279 added game.gametimer solely for the editor ghosts feature. It
seems that whoever originally wrote it (Leo for the now-dead VVVVVV:
Community Edition, I believe) forgot that the game already had its own
timer, that they could use.
The game timer does increment on unfocus pause (whereas this doesn't),
but that's a separate issue, and it ought to not do that.
So #434 didn't end up solving the deltaframe flashing fully, only
reduced the chances that it could happen.
I've had the Level Complete image flash a few times when the Game Saved
text box pops up. This seems to be because the Level Complete image is
based off of the text box being at y-position 12, and the Game Saved
text box is also at y-position 12. Level Complete only gets drawn if the
text box additionally has a red channel value of 165, and the Game Saved
text box has a red channel value of 174. However, there is a check that
the text box be fully opaque first before drawing special images. So
what went wrong?
Well, after thinking about it for a while, I realized that even though
there is indeed an opaqueness check, the alpha of the text box updates
BEFORE it gets drawn. And during the deltaframes immediately after it
gets updated, the text box is considered fully opaque. It's completely
possible for the linear interpolation to end up with a red channel value
of 165 during these deltaframes, while the text box is opaque as well.
As always, it helps if you have a high refresh rate, and run the game
under 40% slowdown.
Anyways, so what's the final fix for this issue? Well, use the text box
'target' RGB values instead - its tr/tg/tb attributes instead of its
r/g/b attributes. They are not subject to interpolation and so are
completely reliable. The opaqueness check should still be kept, though,
because the target values don't account for opaqueness. And this way, we
get no more deltaframe flashes during text box fades.
An even better fix would be to not use magic RGB values to draw special
images... but that'd be something to do later.
Clang warns on this. This doesn't fix anything but it does ensure that
whoever's reading it won't be focused as to whether or not omitting the
second set of braces is legal or not.
Previously, with the wrong loop order, this kludge needed to exist so
entities in finalmode didn't have wrong colors for 1 frame when entering
a room. But now the loop order has been fixed, and so this kludge is no
longer needed.
In 2.2, at render time, the game rendered screenshakes and flashes if
their timers were above 0, and then decremented them afterwards. The
game would also update the analogue filter right before rendering it,
too.
In 2.3, this was changed so the flash and screenshake timers were
unified, and also done at the end of the frame - right before rendering
happened. This resulted in 1-frame flashes and screenshakes not
rendering at all. The other changes in this patchset don't fix this
either. The analogue filter was also in the wrong order, but that is
less of an issue than flashes and screenshakes.
So, what I've done is made the flash and screenshake timers update right
before the loop switches over to rendering, and only decrements them
when we switch back to fixed functions (after rendering). The analogue
filter is also updated right before rendering as well. This restores
1-frame flashes and screenshakes, as well as restores the correct order
of analogue filter updates.
This reintroduces 2-frame edge-flipping after the 1-frame input delay
got removed. This is because along with processing input and moving
Viridian, logical onground/onroof assignments need to processed in the
same between-render sequence as well - otherwise Viridian only gets 1
frame of edge-flipping due to frame ordering.
I will need to separate these into two different variables because I
will need to move logical onground/onroof assignments to the start of
gamelogic() - if I kept them together, however, that would change the
visuals of onground/onroof, which I want to keep consistent with 2.2.
To do this, GAMEMODE input needs to be processed, and Viridian needs to
be moved, in the same sequence between render frames. So just move
gameinput to after gamerender. Yes, this is not 2.2 order, but gameinput
only handles player input and nothing else - plus a 1-frame input delay
feels really awful to play with in over-30-mode.
In order to re-remove the 1-frame input delay, we will have to poll
input right after rendering a frame - in other words, just before an
input function gets called.
To do this, I've added a new function enum type - Func_input - that is
the same as a fixed function, but before its function gets called,
key.Poll() gets called. And all input functions have been updated to use
this enum accordingly.
This once again fixes the facing directions of crewmates upon room load,
except now it covers more cases.
So, here is the saga so far:
- 2.0 (presumably) to 2.2: crewmate direction fix is special-cased at
the end of mapclass::loadlevel(). Only covers crewmates created during
the room load, does not cover crewmates created from scripts, only
covers state 18 of crewmates.
- 2.3 currently (after #220): crewmate direction fix is moved to
entityclass::createentity(), which covers every avenue of crewmate
creation (including from scripts), but still only covers state 18.
- This commit: crewmate direction fix now covers every possible state of
the crewmate, also does not copy-paste any code.
What I've done instead is to make it so createentity() will immediately
call updateentities() on the pushed-back entity. This is kludge-y, but
is completely okay to do, because unlike other entities, crewmate
entities never change their state or have any side-effects from
double-evaluation, meaning calling updateentities() on them is
idempotent and it's okay to call their updateentities() more than once.
This does have the slight danger that if the states of crewmates were to
change in the future to no longer be idempotent, this would end up
resulting in a somewhat hard-to-track-down double-evaluation bug, but
it's worth taking that risk.
This fix is not applied to entity 14 (the supercrewmate) because it is
possible that calling updateentities() on it will immediately remove the
entity, which is not idempotent (it's changing the state of something
outside the object). Supercrewmates are a bit difficult to work with
outside of the main game anyways, and if you spawn them you could
probably just use the changedir() script command to fix their direction,
so I'm not inclined to fix this for them anyway.
This copy-pasted code only existed because the previous loop order was
incorrect and rendered entities before they would get properly updated
by the fixed render function. Now, the fixed render function is
guaranteed to be called before the render function, so we can rely on
that to update the drawframe and realcol of entities instead of
duplicating the code ourselves in createentity().
The drawframe assignment is still kept to fix the case where dying while
completestop is active (i.e. during a trinket or crewmate rescue
cutscene) and respawning in a different room won't turn everything into
Viridian sprites.
The background would change for 1 frame before sending you back to the
pause menu or editor settings. The map.nexttowercolour() call needs to
be deferred until the end of the frame.
The new loop order introduces a glitch where the menu would display
whichever menu was saved to kludge_ingametemp for 1 frame right as the
user returned to the pause menu. This happened because the
game.returntomenu() happens in titleinput(), which comes before
titlerender(). To fix this, we just need to defer it to the end of the
frame.
game.shouldreturntoeditor was added to fix a frame ordering issue that
was causing a bug where if you started playtesting in a room with a
horizontal/vertical warp background, and exited playtesting in a
different room that also had a horizontal/vertical warp background and
which was different, then the background of the room you exited in would
slowly scroll offscreen, when you re-entered the editor, instead of the
background consisting entirely of the actual background of the room.
Namely, the issue was that the game would render one more frame of
GAMEMODE after graphics.backgrounddrawn got set to false, and re-set it
to true, thus negating the background redraw, so the editor background
would be incorrect.
With defer callbacks, we can now just use a couple lines of code,
instead of having to add an extra kludge variable and putting handling
for it all over the code.
Sometimes, there needs to be code that gets ran at the end of the game
loop, otherwise rendering issues might occur. Currently, we do this by
special-casing each deferred routine (e.g. shouldreturntoeditor), but it
would be better if we could generalize this deference instead.
Deferred callbacks can be added using the DEFER_CALLBACK macro. It takes
in one argument, which is the name of a function, and that function must
be a void function that takes in no arguments. Also, due to annoying C++
quirks, void functions taking no arguments cannot be attributes of
objects (because they have an implicit `this` parameter), so it's
recommended to create each callback separately before using the
DEFER_CALLBACK macro.
Otherwise, the player would appear to "zip" during the deltaframes
between their previous position and their new position. This did not
happen in the previous game loop order and only happens in the new one.
Previously, before the game loop order got fixed, going to the in-game
settings would switch over to the new render function too early, causing
a deltaframe glitch that had to be fixed. But now, the render function
only gets switched when the current gamestate's function list gets
finished executing, so the game won't suddenly switch to titlerender()
in the middle of the ACTION press to the in-game settings screen.
As a consequence, titleupdatetextcol() no longer needs to be exported to
Input.cpp.
The previous location of this loop was placed there because it happened
just after the end of the render function. Now that the loop order is
fixed, the first thing that happens after the render function is the
start of gamelogic(), so this loop should go there now, else entity
positions won't be interpolated.
Also it now preincrements instead of postincrements because I like
preincrements.
Okay, so the reason why all render functions were moved to the end of
the frame in #220 is because it's simpler to call two fixed functions
and then a delta function instead of one fixed function, then a delta
function, and then another fixed function.
This is because fixed functions need special handling inside
deltaloop(), and you can't simply duplicate this handling after calling
a delta function. Oh, and to make matters worse, it's not always
fixed-delta-fixed, sometimes (like in MAPMODE and TELEPORTERMODE) it's
delta-fixed-fixed, so we'd need to handle that somehow too.
The solution here is to generalize the game loop and factor out each
function, instead of hardcoding it. Instead of having hardcoded
case-switches directly in the loop, I made a function that returns an
array of functions for a given gamestate, along with the number of
functions, then the game loop processes it accordingly. In fixedloop(),
it iterates over the array and executes each function until it reaches a
delta function, at which point it stops. And when it reaches the end of
the array, it goes back to the start of the array.
But anyway, if it gets to a delta function, it'll stop the loop and
finish fixedloop(). Then deltaloop() will call the delta function. And
then on the next frame, the function index will be incremented again, so
fixedloop() will call the fixed functions again.
Actually, the previous game loop was actually made up of one big loop,
with a gamestate function loop nested inside it, flanked with code that
ran at the start and end of the "big loop". This would be easy to handle
with one loop (just include the beginning and end functions with the
gamestate functions in the array), except that the gamestate functions
could suddenly be swapped out with unfocused functions (the ones that
run when you unfocus the window) at any time (well, on frame boundaries,
since key.isActive only got checked once, guarding the entire "inner
loop" - and I made sure that changing key.isActive wouldn't immediately
apply, just like the previous game loop order) - so I had to add yet
another layer of indirection, where the gamestate functions could
immediately be swapped out with the unfocused functions (while still
running the beginning and end code, because that was how the previous
loop order worked, after all).
This also fixes a regression that the game loop that #220 introduced
had, where if the fixed functions switched the gamestate, the game would
prematurely start rendering the gamestate function of the new gamestate
in the deltaframes, which was a source of some deltaframe glitches. But
fixing this is likely to just as well cause deltaframe glitches, so it'd
be better to fix this along with fixing the loop order, and only have
one round of QA to do in the end, instead of doing one round after each
change separately.
Fixes #464... but this isn't the end of the patchset. There are bugs
that need to be fixed, and kludges that need to be reverted.
Y-position 180 would be the position of the Level Complete and Game
Complete special text boxes in Flip Mode. However, since the y-position
of flipme text boxes actually no longer change (because we have to
accomodate changing Flip Mode on-the-fly), these text boxes will never
actually be y-position 180 - so we should remove these checks for
clarity.
A-ha! I've spotted an inconsistency! The normal trinket collection text
boxes (gamestate 1000-1003) is aware of Flip Mode, and will position
themselves accordingly to read the correct way in Flip Mode. However,
foundtrinket() doesn't do this.
Well, now it does.
This is why the text box attribute was named flipme, after all.
You may have noticed that the flipme command inverts textflipme instead
of simply setting it to true. Well, that's because it should be the same
as the previous behavior, which was essentially to invert it instead of
setting it to true - i.e. calling flipme twice would keep the original
text box position in Flip Mode, which means it would be upside-down
(this is a lot of flipping to keep track of...) - because flipme added
to texty in-place instead of simply assigning to it. (It did the
calculation incorrectly in 2.2 and previous, but I digress.)
Similarly, textflipme is not reset in hardreset(), because none of the
other script text box variables are reset either.
This ensures that if the player decides to toggle Flip Mode while one of
these text boxes is up, they won't be oriented improperly. Additionally,
it also de-duplicates a bunch of Flip Mode check code, which is also a
win.
createtextboxreal() is the same as createtextbox(), but with a flipme
parameter added to create text boxes that have their flipme attribute
set to true. createtextbox() just calls createtextboxreal() with flipme
set to false, and createtextboxflipme() just calls createtextboxreal()
with flipme set to true; this is because I do not want to use C++
function overloading.
Instead of calculating the y-position of the text box when it's created,
we will store a flag that says whether or not the text box should be
flipped in Flip Mode (and thus stay right-side-up), and when it comes
time to draw the text box, we will check Flip Mode and calculate the
position then.
Instead of duplicating the same variables over and over again,
Graphics::drawgui() can just make its own SDL_Rect. It's not that hard.
As far as I can tell, textrect was always being properly kept up to date
by the time Graphics::drawgui() got around to rendering
(textboxclass::resize() keeps being called a LOT), so this shouldn't be
a noticeable change from the user perspective.
The "Game Saved" text box, along with its associated telesave() call,
exists in both Game.cpp and Script.cpp, so one of them is the copy-paste
of the other. Unfortunately this copy-paste resulted in an inconsistency
where both of them don't check for the same things when deciding whether
or not the telesave should actually happen (this is why you don't
copy-paste, kids... it's scary!).
Either way, de-duplicating this now is less work for me later.
Every Level Complete sequence is the same copy-pasted thing, but with
minor changes. To make my work easier, I'm de-duplicating them so I have
less text boxes to change later, and less grind to grind.
These default arguments are never used anywhere. And if they were used
anywhere, it'd be better to explicitly say 255,255,255 than make readers
have to look at the header file to see what these default to. Also, this
creates four different overloads of createtextbox(), instead of only
two - but we ought to not be using function overloading anyway.
These commented-out code blocks just get in the way of clarity when I'm
refactoring flipped textboxes created in the gamestate system. So I'm
getting rid of them. If we need them back, we always have Git history.
Since the only difference is the y-positions, I've decided to remove the
copy-pasted code. A better solution would be to have a function that
draws multiline text and handles it accordingly in Flip Mode, but that
could be done later.
The only difference between Flip Mode and normal mode is the y-position
and sprite used to draw the crewmates. Everything else is the same, so
I've removed the copy-pasted portion.
The diff might look a bit ugly due to the unindentation.
Since the only difference in Flip Mode is the positiveness/negativeness
of the iterator variable, plus the starting y-offset, I've removed the
copy-pasted code and did this instead.
The diff might look a bit ugly due to the unindentation.
Like cutscene bars, I've added Graphics::setfade(), to ensure that no
deltaframe rendering glitches happen due to oldfadeamount not being
updated properly.
And indeed, this fixes a deltaframe rendering glitch that happens if you
return to the editor from playtesting on a faded-out screen, then fade
out again (by either re-entering playtesting and then cause a fadeout to
happen again, or by quitting from the editor afterwards). The same
glitch also happens outside of in-editor playtesting if you exit to the
menu while the screen is faded out.
To do this, I've added Graphics::setbars(), to make sure
oldcutscenebarspos always gets assigned when cutscenebarspos is. This
fixes potential deltaframe rendering issues if these two mismatch.
While working on #535, I noticed that editormenuactionpress() still
didn't do the explicit void declaration. Then I ran `rg 'void.*\(\)'`
and found three other functions that I somehow missed in #628. Whoops.
Well, now they no longer are missed.
This is a small quality-of-life tweak that makes it so if you're in the
middle of editing a level, you don't have to save the level, exit to the
menu, change whatever setting you wanted, re-enter the editor, and type
in the level name, just to change one setting. This is the same as
adding Graphic Options and Game Options to the in-game pause menu,
except for the editor, too.
To do this, I'm reusing Game::returntopausemenu() (because all of its
callers are the same callers for returning to editor settings) and
renamed it to returntoingame(), then added a variable named
ingame_editormode to Game. When we're in the options menus but still in
the editor, BOTH ingame_titlemode and ingame_editormode will be true.
This is a small quality-of-life thing that makes it so you don't have to
move your menu selection all the way over to the "return" button in
order to return to the previous menu. You can just press Escape instead
to return to the previous menu. The previous behavior of pressing Escape
was to bring up the 'confirm quit' menu, or if you were in an options
menu in-game, return to the pause menu.
If you're on the main menu (and thus don't have any previous menu) and
press Escape, the game will instead bring up the 'confirm quit' menu.
For consistency, the "quit game" option on the main menu will also bring
up the 'confirm quit' menu as well, instead of immediately closing the
game.
Pressing the controller button mapped to Escape will also work as well.
The only menus that don't have return buttons are the 'countdown' menus
- so the game will not let you press Escape if there's a menu countdown
happening.
Now that pressing Escape in the 'continue' menu will just bring you back
to the 'play' menu, there's no need to specifically put
map.nexttowercolour() first when canceling the 'confirm quit' menu.
As part of my work in #535, I've noticed that 2.3 currently with 2.2
loop order doesn't have interpolated cutscene bars. This is because
cutscene bars in 2.3 get updated at the start of the frame, which
interpolates them correctly until the render functions are put in their
proper place.
There is, however, a somewhat bigger issue, outside the scope of #535,
where cutscene bars always get updated regardless of which gamemode you
are in. Previously in 2.2 and previous, cutscene bars only got updated
in GAMEMODE and TELEPORTERMODE; sometime during 2.3, the cutscene bars
timer got pulled out of all the individual game modes and moved to the
very start of the loop. (I was probably the one who did this change;
I've been caught in a trap of my own devising.)
Thus, going to MAPMODE during the cutscene bars animation doesn't keep
their position paused like it would in 2.2. This is also categorically a
more-than-visual change, since the untilbars() script command depends
on the cutscene bars timer. I see no reason for the cutscene bars to
behave differently in this way than 2.2; #535 would also end up doing
the same fix more-or-less anyway.
Since TELEPORTERMODE currently uses the same renderfixed function as
MAPMODE, I've had to add a teleporterrenderfixed() that just calls
maprenderfixed(), but also does the cutscene bars timer.
As a partial fix for #618, adding the SDL2 version number to the README
will clarify that you need a specific version of SDL2 in order to
compile (and run) the current version of the game (2.3 at the time of
writing); in the future, the SDL2 dependency will be upgraded with each
SDL release.
This is to avoid error messages that complain about missing symbols like
SDL_zeroa() (added in SDL 2.0.14) not being present at the time of
compilation.
Closes#626.
This moves the responsibility of toggling fullscreen when any of the
three toggle fullscreen keybinds are pressed (F11, Alt+Enter, Alt+F)
directly into key.Poll() itself, and not its caller (which is main() -
more specifically, fixedloop()). Furthermore, the fullscreen toggle
itself has been moved to a separate function that key.Poll() just calls,
to prevent cluttering key.Poll() with more business logic (the function
is already quite big enough as it is).
As part of my work in re-removing the 1-frame input delay in #535, I'm
moving the callsite of key.Poll() around, and I don't want to have to
lug this block of code around with it. I'd rather refactor it upfront
than touch any more lines than necessary in that PR.
This fixes a bug where the resumemusic() script command would always
play MMMMMM track 15 (or, if you're using PPPPPP, just not work). This
is because musicclass::haltdasmusik() assigns resumesong AFTER calling
Mix_HaltMusic(), but the songend() callback fires before the resumesong
assignment, meaning resumesong gets set to -1 instead of whatever
currentsong was previously.
To fix this, just move the assignment into the callback itself (I don't
know why this wasn't done before). I could have moved it to before the
Mix_HaltMusic() call, but moving it into the callback itself fixes it
for all cases of the music stopping (such as when the music fades out).
This avoids the room name awkwardly moving back up if the cursor is at
the bottom of the screen in a room with a room name, then the user
switches to a room without a room name, then moves the cursor away from
the bottom, then switches to a named room - even though the cursor was
already away from the bottom of the screen.
Conversely, if the user moves their cursor to the bottom of the screen
in an unnamed room, then switches into a named room, the room name will
already have been hidden and they won't need to wait for it to hide.
This fixes the drawer suddenly popping up only to disappear, if the user
leaves a Direct Mode room into a non-Direct Mode room when the drawer
hasn't closed all the way, and then re-enters a Direct Mode room.
Gravity line correction no longer happens on every deltaframe. This
means less CPU time is wasted. Although, there's probably no need to
correct gravity lines on every single frame... hm... well, that's an
optimization for later (there's plenty of other stuff to cache, like
minimap drawing or editor foreground drawing).
Since it only ever gets assigned from FILESYSTEM_getUserSaveDirectory(),
and that function returns a C string, and the variable is only ever read
from again, this doesn't need to be an std::string.
In #553, when Dav999 added error messages to settings menus if the game
was unable to successfully save the changed settings, he seemed to have
forgotten the PPPPPP/MMMMMM toggle option.
However, I can fully blame him for only that miss. The Flip Mode options
were using game.savemystats (which was removed in #591), so if he
searched for all instances of game.savestats()
(game.savestatsandsettings() was only added in #557), he would've missed
the game.savemystats.
Later, when I did #591, I didn't realize that I should've replaced the
ones in the Flip Mode options with game.savestatsandsettings_menu(), so
part of the blame does fall on me.
Anyways, this is fixed now.
If there was absolutely no music playing, and you went to the in-game
options to switch between MMMMMM and PPPPPP, the behavior would be a bit
glitchy.
If you started with PPPPPP, switching once to MMMMMM wouldn't play
anything, but then switching back to PPPPPP would play MMMMMM track 15.
Then switching back to MMMMMM wouldn't do anything, but then switching
back to PPPPPP again would play PPPPPP track 15 - and from there, the
behavior is stable.
If you started with MMMMMM, switching once to PPPPPP would play MMMMMM
track 15. Then switching back to MMMMMM wouldn't do anything, but then
switching back to PPPPPP would play PPPPPP track 15 - and as above, the
behavior is stable after that.
Anyways, the point is, -1 shouldn't be passed to musicclass::play()
unless you want glitchy things. And I'm not patching -1 out of
musicclass::play() itself, because passing negative numbers results in a
useful glitch (that's existed since 2.2) where you can play MMMMMM
tracks while having PPPPPP selected, effectively doubling the amount of
usable music tracks within a custom level; it also seems like the game
does -1 checks elsewhere, so I'm just being consistent with the rest of
the game (although, yes, I am technically single-case patching this).
I ran Include What You Use on the file, and a BUNCH of transitive
includes showed up.
colourTransform is used in the file, so GraphicsUtil.h needs to be
included. libc floor() is used in the file, so math.h needs to be
included (I'm removing this next...). NULL is used, so stddef.h. And
stdlib.h is used because we use rand() directly instead of going through
fRandom(). Speaking of which, we use fRandom(), so Maths.h needs to be
included, too.
So, 2.3 added recoloring one-way tiles to no longer make them be always
yellow. However, custom levels that retexture the one-way tiles might
not want them to be recolored. So, if there are ANY custom assets
mounted, then the one-ways will not be recolored. However, if the XML
has a <onewaycol_override>1</onewaycol_override> tag, then the one-way
will be recolored again anyways.
When I added one-way recoloring, I didn't intend for any custom asset to
disable the recoloring; I only did it because I couldn't find a way to
check if a specific file was customized by the custom level or not.
However, I have figured out how to do so, and so now tiles.png one-way
recolors will only be disabled if there's a custom tiles.png, and
tiles2.png one-way recolors will only be disabled if there's a custom
tiles2.png.
In order to make sure we're not calling PhysFS functions on every single
deltaframe, I've added caching variables, tiles1_mounted and
tiles2_mounted, to Graphics; these get assigned every time
reloadresources() is called.
This function will check if a specific file is a mounted per-level
custom asset, instead of being a variable that's true if ANY file is a
mounted asset.
Now you only have to call one function (and pass it a tile number) to
figure out if you should recolor a one-way tile or not, and you don't
have to copy-paste.
It's only used in FileSystemUtils and never anywhere else, especially
not Graphics. Why is this on Graphics again?
It's now a static variable inside FileSystemUtils. It has also been
renamed to assetDir for consistency with saveDir and levelDir. Also,
it's a C string now, and is no longer an STL string.
There's no need to create an std::string for every single element just
to see if it's a key name.
At least in libstdc++, there's an optimization where std::strings that
are 16 characters or less don't allocate on the heap, and instead use
the internal 16-char buffer directly in the control structure of the
std::string. However, it's not guaranteed that all the element names
we'll get will always be 16 chars or less, and in case the std::string
does end up allocating on the heap, we have no reason for it to allocate
on the heap; so we should just convert these string comparisons to C
strings instead.
This bug is technically NOT a regression - the code responsible for it
has been around since the source release.
However, it hasn't been a problem until Graphic Options and Game Options
were added to the pause screen. Since then, if you opened the pause menu
in Flip Mode, pressing up would move to the menu option below, and
pressing down would move to the menu option above. Notably, left and
right still remain the same.
This is because the map screen input code assumes that the menu options
will be flipped around - however, this has never been the case. What
happens instead is that the menu options get flipped around time when in
Flip Mode - flipping what's already flipped - so it ends up the same
again.
(Incidentally enough, the up/down reversing code is present on the title
screen, and is correct - if you happen to set graphics.flipmode to true
on the title screen, the title screen doesn't negate the flipped menu
options, so pressing up SHOULD be treated like pressing down, and vice
versa. However, in 2.3, it's not really possible to set
graphics.flipmode to true on the title screen without using GDB or
modifying the game. In 2.2 and previous, you can just complete the game
in Flip Mode, and the variable won't be reset; 2.3 cleaned up all exit
paths to the menu to make sure everything got reset.)
This isn't a problem when there's only two options, but since 2.3 adds
two more options to the pause screen, it's pretty noticeable.
Anyway, this is fixed by simply removing the branch of the
graphics.flipmode if-else in mapinput(). The 'else' branch is now the
code that gets executed unconditionally. Don't get confused by the diff;
I decided to unindent in the same commit because it's not that many
lines of code.
This fixes a "root cause" bug (that's existed since 2.2 and below) where
recreated surfaces wouldn't preserve the blend mode of their original
surface.
The surface-level (pun genuinely unintended) bug that this root bug
fixes is the one where there's no background to the room name during the
map menu animation in Flip Mode.
This is because the room name background relies on graphics.backBuffer
being filled with complete black. This is achieved by a call to
ClearSurface() - however, ClearSurface() actually fills it with
transparent black (this is not a regression; in 2.2 and previous, this
was an "inlined" FillRect(backBuffer, 0x00000000)). This would be okay,
and indeed the room name background renders fine in unflipped mode - but
it suddenly breaks in Flip Mode.
Why? Because backBuffer gets fed through FlipSurfaceVerticle(), and
FlipSurfaceVerticle() creates a temporary surface with the same
dimensions and color masks as backBuffer - it, however, does NOT create
it with the same blend mode, and kind of sort of just forgets that the
original was SDL_BLENDMODE_NONE; the new surface is SDL_BLENDMODE_BLEND.
Thus, transparency applies on the new surface, and instead of the room
name being drawn against black, it gets drawn against transparency.
Here I'm using "surface recreation" to mean allocating a new surface
with almost the exact same properties as a given previous. As you can
see, GraphicsUtil likes to recreate surfaces all the time - copying the
masks and flags (unused lol) of an existing surface - and only varies it
by the dimensions of the new surface.
As you can see, this is a lot less wordy and a lot less repetitive than
copy-pasting it a bunch.
In normal mode, the room name is at the bottom of the screen. When you
bring up the map screen, it appears as if the room name is moving up
from the bottom of the screen, and the map screen is "pushing" it up.
The effect is pretty seamless, and when I first played the game (back in
2014), I thought it was pretty cool.
However, in Flip Mode, the room name is at the top of the screen. So one
would expect the menu animation to come from above the screen. Well, no,
it still goes from the bottom of screen; ruining the effect because it
seems like there are two room names on the screen, when there ought to
be only one.
To be fair, I only noticed this while fixing another bug now, but it's
one of those things you can't unsee (I have cursed you with knowledge!);
not to mention that I probably only didn't notice this because I don't
play in Flip Mode that often (and I'd wager almost no one does; Flip
Mode previous to 2.3 seems to have been really untested, like I said
in #165). It feels like a bit of an oversight that the direction of the
animation is the same direction as in unflipped mode. So I'm fixing
this.
If you stood in two activity zones at once, you'll automatically select
the one that got created first. And when you activated it, the activity
zone prompt would switch to fading out the prompt of the OTHER activity
zone, the one you didn't activate.
This wasn't a problem in 2.2 and previous, because the fading animation
was simply bugged and defaulted to being solid black. However, in 2.3,
the fading animation is fixed, so this is possible.
Also, this really only happens in the main game. Since there's only one
type of useful activity zone in custom levels - namely the terminal
activity zone - if two activity zones did happen to overlap, activating
one of them wouldn't result in visibly fading out a different activity
zone (because they both look the same); furthermore custom level makers
are careful to not overlap terminal activity zones, lest this result in
player confusion; furthermore the placed activity zones only cover a
small area, whereas in the main game, crewmates' activity zones are
pretty big.
(Technically, you CAN create main game activity zones in custom levels,
but those are hardcoded to call main game scripts, and basically nobody
uses them.)
So what's the solution? Simply adding game.hascontrol and script.running
checks to the updating of game.activity_last[prompt|r|g|b].
Why not add those checks to the assignment of game.activeactivity, just
above? Because that would introduce a frame ordering issue (that
would NOT be (automatically) fixed by #535) where the eligibility of
pressing Enter on an activity zone now checks if you were standing in an
activity zone LAST frame, and not THIS frame. (I tested this with
libTAS.) Better to fiddle with the rendering code than fiddle with the
actual physics code.
The specific spot I used to test this was standing in Violet's activity
zone and the activity zone of the ship radio terminals (the three
terminals on the ground in her room); the ship radio terminals are
first-placed, so if you're testing this (and you should!), make that the
prompt is of the ship radio activity zone before activation.
This probably should've been moved to RenderFixed a while ago, because
it's unnecessary to run this on every single deltaframe.
The only minor wrinkle here is that this means rendering of activity
zone fades will be delayed for 1 frame, but #535 will fix that.
Since you're now allowed to bring up the map screen during cutscenes,
you've also been able to activate activity zones and teleporter prompts
during cutscenes. This only really affects custom levels; nowhere in the
main game can you overlap with an activity zone while in a cutscene.
To fix this, I've just added a script.running check to Enter keybind
processing.
I was looking through all calls to game.returnmenu(), and I noticed that
the return option in the game pad screen didn't have a
map.nexttowercolour(). I tested it and, yep, returning from there
doesn't update the background color.
So that should be fixed now.
I'm... not sure why this was here? It's absolutely not needed.
I'm guessing maybe at one point during development, there might have
been wanted a special song to be played during the credits, or no song
at all (although the function being niceplay() instead of play() seems
to support the first possibility) - but there's no need for this to be
here.
Now that recreating the same menu keeps currentmenuoption, we can remove
all these superfluous assignments. This means repeating ourselves less;
in case the option numbers change in the future, we won't have to
remember to update these reassignments, too.
When recreating the same menu, there's basically no reason to reset the
currently-selected menu option. (Also, no need to worry about indexing
out of bounds or anything - the number gets checked while iterating over
all menu options; it's never used to actually index anything. At worst
there might be a 1-frame flicker as the bounds code in gameinput() kicks
in, but that shouldn't happen anyways.)
Zip files that have been successfully mounted in editorclass::loadZips()
will now be ignored when the game does its second pass over the levels
directory. Otherwise, this would produce a superfluous error message,
because the game would attempt to parse the zip file as a level file
(when it's not a level file and is in fact a binary file).
This returns if the file given is mounted or not. 2.3 added level zip
support, so whenever the game loads level metadata, it will mount any
zip files in the levels directory; this function can be used to check if
any of those files have been mounted, and ignore them if so.
Otherwise, this would produce a superfluous warning message in the
console. Directories are now ignored and never attempted to be opened;
so now any warning messages printed out are genuine file that something
has genuinely gone wrong with.
Well, there's still a warning message printed if there's a symlink to a
directory; this is rarer, but it's still a false positive.
This function will be used to differentiate files from directories.
Or at least that was the hope. Symlink support was added in 2.3, but it
doesn't seem like PHYSFS_stat() lets you follow the symlink to check if
what it points to is itself a file or directory. And there doesn't seem
to be any function to follow the symlink yourself...
So for now, this function considers symlinks to directories to be files.
PHYSFS_readBytes() returns a PHYSFS_sint64, but we forcefully shove it
into a 32-bit signed integer.
Fixing the type of this doesn't have any immediate consequences, but
it's good for the future in case we want to use the return value for
files bigger than 2 gigabytes; it doesn't harm us in any way, and it's
just better housekeeping.
PHYSFS_fileLength() returns -1 if the file size can't be determined. I'm
going to set it to 0 instead, because it seems like that's more
well-behaved with consumers.
Take lodepng_decode24() or lodepng_decode32(), for example - from a
quick glance at the source, it only takes in a size_t (an unsigned
integer) for the filesize, and one of the first things it does is malloc
with the given filesize. If the -1 turns into SIZE_MAX and LodePNG
attempts to allocate that many bytes... well, I don't know of any
systems that have 18 exabytes of memory. So that seems pretty bad.
The function returns a PHYSFS_sint64, but we forcefully shove it into a
PHYSFS_uint32. This means we throw away all the negative numbers, which
is bad because the function returns -1 if the size of the file can't be
determined; plus, we also throw away 32 bits of information, reducing
our range of supported file sizes from 9 exabytes to 4 gigabytes.
File size support is only as good as the weakeast link, and it looks
like one of the consumers of FILESYSTEM_loadFileToMemory(),
SDL_RWFromConstMem(), only takes in a signed 32-bit integer of size;
however, I would still like to do at least the bare minimum to support
as many file sizes as we can, and changing types around is one of those
bare minimums.
I had misread this line in #629 and thought that it was just clearing
the entire surface, when really it was filling the surface with opaque
black. ClearSurface() would instead make it transparent, which would
mean when it got drawn, it would get drawn against blue, and not black.
Whoops.
These float attributes are assigned to, and then never read again. The
coordinate systems of blocks are a bit of a mess - some use xp/yp, some
use xp/yp and rect.x/rect.y - but I can confidently say that these are
never used, because it compiles fine if I remove the attributes from the
class, plus remove all assignments to it.
Screen.cpp wasn't explicitly including SDL.h, instead relying on
Screen.h to include it.
It was also relying on SDL.h to include stdio.h on Linux, which breaks
because SDL.h doesn't include stdio.h on Windows. So stdio.h is now
explicitly included as well.
stdlib.h is not used in this file.
After reasoning about it for a bit, there's no reason for these checks
to be here. `zip_normal` will either be
/home/infoteddy/.local/share/VVVVVV/levels if the asset directory is a
directory, or levels/levelname.zip if the asset directory is inside the
same zip as the level is. I don't see how they could ever be data.zip.
My guess is because of the VCE bug where it messed up its search path,
and before that bug was fixed, it had to be worked around here by
explicitly blacklisting data.zip here. When the assets mounting stuff
was ported from VCE to vanilla, vanilla didn't have the problem, and so
this data.zip blacklisting stuff was unnecessary.
Either way, I see no reason for this, so I'm going to remove it.
There is no need to use heap-allocated strings here, so I've refactored
them out. I've also cleaned up both of the functions a bit, because the
line spacing of the previous version was completely non-existent, brace
style was same-line instead of next-line, and the variable names were a
bit misleading (in FILESYSTEM_mountassets(), there is a `zippath` AND a
`zip_path`, which are two completely different variables).
Also, FILESYSTEM_mount() now prints an error message and bails if
PHYSFS_getRealDir() returns NULL, whereas it didn't do that before.
The function is literally just an alias for PHYSFS_exists(), which does
not exclusively check for directories. Plus, the function is also used
to check if a non-directory file exists. Why is this function named
"directoryExists"?!
The info message when a .data.zip file is mounted is now differentiated
from the message when an actual directory is mounted (the .data.zip
message specifies ".data.zip").
The error message for an error occurring when loading or mounting a .zip
is now capitalized.
The "Custom asset directory does not exist" now uses puts(), because
there's no need to use printf() here.
I don't know why this is here; it's unused. I don't know why the
compiler doesn't warn about this being unused either - maybe it's
secretly being used? That also means I'm not sure if the compiler is
optimizing this away or not. Anyway, this is getting removed.
The STL here cannot be completely eliminated (because the custom entity
object uses std::string), but at least we can avoid unnecessarily making
std::strings until the very end.
There's not really any reason for this function to use heap-allocated
strings. So I've refactored it to not do that.
I would've used SDL_strrstr(), if it existed. It does not appear to
exist. But that's okay.
PhysFS by default just uses system malloc(), realloc(), and free(); it
provides a way to change them, with a struct named PHYSFS_Allocator and
a function named PHYSFS_setAllocator().
According to PhysFS docs, this function should be called before
PHYSFS_init(), which is why this allocator stuff is handled in
FileSystemUtils.cpp.
Also, I've had to make two "bridge" functions, because PHYSFS_Allocator
wants pointers to functions taking in `PHYSFS_uint64`s, not `size_t`s.
ClearSurface() is less verbose than doing it the old way, and also
conveys intent clearer. Plus, some of these FillRect()s had hardcoded
width and height values, whereas ClearSurface() doesn't - meaning this
change also has better future-proofing, in case the widths and heights
of the surfaces involved change in the future.
When you pass NULL in for the SDL_Rect* parameter to SDL_FillRect(), SDL
will automatically fill the entire surface with that color. There's no
need for us to create the SDL_Rect ourselves.
This is a function that does what it says - it clears the given surface.
This just means doing a FillRect(), but it's better to use this function
because it conveys intent better.
This is pretty old commented-out code from earlier versions of the game;
they are no longer useful, and are just distracting. If we need them, we
can always refer back to this commit (but I sincerely doubt that we'll
need them).
Apparently in C, if you have `void test();`, it's completely okay to do
`test(2);`. The function will take in the argument, but just discard it
and throw it away. It's like a trash can, and a rude one at that. If you
declare it like `void test(void);`, this is prevented.
This is not a problem in C++ - doing `void test();` and `test(2);` is
guaranteed to result in a compile error (this also means that right now,
at least in all `.cpp` files, nobody is ever calling a void parameter
function with arguments and having their arguments be thrown away).
However, we may not be using C++ in the future, so I just want to lay
down the precedent that if a function takes in no arguments, you must
explicitly declare it as such.
I would've added `-Wstrict-prototypes`, but it produces an annoying
warning message saying it doesn't work in C++ mode if you're compiling
in C++ mode. So it can be added later.
One of these days, I need to get around to running Include What You Use
on this codebase. Until then, while I was working on #624, I noticed
these; I'm removing them now.
The recently released SDL 2.0.14 adds a native function for opening URIs
from the host system, superseding the OS-specific implementations of
FILESYSTEM_openDirectory.
This fixes a regression where moving platforms had no collision. Because
their width and height would be maintained, but their type would be -1.
(Also because I didn't test enough.)
In #565, I decided to set blocks' types to -1 when disabling them, to be
a bit safer in case there was some code that used block types but not
their width and heights. However, this means that when blocks get
disabled and re-created in the platform update loops, their types get
set to -1, which effectively also disables their collision.
In the end, I'll just have to compromise and remove setting blocks to
type -1. Because in a better world, we shouldn't be destroying and
creating blocks constantly just to move some platforms - however, fixing
such a fundamental problem is beyond the scope of at least 2.3 (there's
also the fact that this problem also results in some bugs that are a
part of compatibility, whether we like it or not). So I'll just remove
the -1.
next_split_s() could potentially commit out-of-bounds indexing if the
amount of source data was bigger than the destination data.
This is because the size of the source data passed in includes the null
terminator, so if 1 byte is not subtracted from it, then after it passes
through the VVV_min(), it will index 1 past the end of the passed buffer
when null-terminating it.
In contrast, the other argument of the VVV_min() does not need 1
subtracted from it, because that length does not include a null
terminator (next_split() returns the length of the substring, after all;
not the length of the substring plus 1).
(The VVV_min() here also shortens the range of values to the size of an
int, but we'll probably make size_t versions anyway; plus who really
cares about supporting massively-sized buffers bigger than 2 billion
bytes in length? That just doesn't make sense.)
If PHYSFS_enumerate() isn't successful, we now print that it wasn't
successful, and print the PhysFS error message. (We should get that
logging thing going sometime...)
Note that level dir listing still uses plenty of STL (including the end
product - the `LevelMetaData` struct - which, for the purposes of 2.3,
is okay enough (2.4 should remove STL usage entirely)); it's just that
the initial act of iterating over the levels directory no longer takes
four or SIX(!!!) heap allocations (not counting reallocations and other
heap allocations this patch does not remove), and no longer does any
data marshalling.
Like text splitting, and binary blob extra indice grabbing, the current
approach that FILESYSTEM_getLevelDirFileNames() uses is a temporary
std::vector of std::strings as a middleman to store all the filenames,
and the game iterates over that std::vector to grab each level metadata.
Except, it's even worse in this case, because PHYSFS_enumerateFiles()
ALREADY does a heap allocation. Oh, and
FILESYSTEM_getLevelDirFileNames() gets called two or three times. Yeah,
let me explain:
1. FILESYSTEM_getLevelDirFileNames() calls PHYSFS_enumerateFiles().
2. PHYSFS_enumerateFiles() allocates an array of pointers to arrays of
chars on the heap. For each filename, it will:
a. Allocate an array of chars for the filename.
b. Reallocate the array of pointers to add the pointer to the above
char array.
(In this step, it also inserts the filename in alphabetically -
without any further allocations, as far as I know - but this is a
COMPLETELY unnecessary step, because we are going to sort the list
of levels by ourselves via the metadata title in the end anyways.)
3. FILESYSTEM_getLevelDirFileNames() iterates over the PhysFS list, and
allocates an std::vector on the heap to shove the list into. Then,
for each filename, it will:
a. Allocate an std::string, initialized to "levels/".
b. Append the filename to the std::string above. This will most
likely require a re-allocation.
c. Duplicate the std::string - which requires allocating more memory
again - to put it into the std::vector.
(Compared to the PhysFS list above, the std::vector does less
reallocations; it however will still end up reallocating a certain
amount of times in the end.)
4. FILESYSTEM_getLevelDirFileNames() will free the PhysFS list.
5. Then to get the std::vector<std::string> back to the caller, we end
up having to reallocate the std::vector again - reallocating every
single std::string inside it, too - to give it back to the caller.
And to top it all off, FILESYSTEM_getLevelDirFileNames() is guaranteed
to either be called two times, or three times. This is because
editorclass::getDirectoryData() will call editorclass::loadZips(), which
will unconditionally call FILESYSTEM_getLevelDirFileNames(), then call
it AGAIN if a zip was found. Then once the function returns,
getDirectoryData() will still unconditionally call
FILESYSTEM_getLevelDirFileNames(). This smells like someone bolting
something on without regard for the whole picture of the system, but
whatever; I can clean up their mess just fine.
So, what do I do about this? Well, just like I did with text splitting
and binary blob extras, make the final for-loop - the one that does the
actual metadata parsing - more immediate.
So how do I do that? Well, PhysFS has a function named
PHYSFS_enumerate(). PHYSFS_enumerateFiles(), in fact, uses this function
internally, and is basically just a wrapper with some allocation and
alphabetization.
PHYSFS_enumerate() takes in a pointer to a function, which it will call
for every single entry that it iterates over. It also lets you pass in
another arbitrary pointer that it leaves alone, which I use to pass
through a function pointer that is the actual callback.
So to clarify, there are two callbacks - one callback is passed through
into another callback that gets passed through to PHYSFS_enumerate().
The callback that gets passed to PHYSFS_enumerate() is always the same,
but the callback that gets passed through the callback can be different
(if you look at the calling code, you can see that one caller passes
through a normal level metadata callback; the other passes through a zip
file callback).
Furthermore, I've also cleaned it up so that if editorclass::loadZips()
finds a zip file, it won't iterate over all the files in the levels
directory a third time. Instead, the level directory only gets iterated
over twice - once to check for zips, and another to load every level
plus all zips; the second time is when all the heap allocations happen.
And with that, level list loading now uses less STL templated stuff and
much less heap allocations.
Also, ed.directoryList basically has no reason to exist other than being
a temporary std::vector, so I've removed it. This further decreases
memory usage, depending on how many levels you have in your levels
folder (I know that I usually have a lot and don't really ever clean it
up, lol).
Lastly, in the callback passed to PhysFS, `builtLocation` is actually no
longer hardcoded to just the `levels` directory, since instead we now
use the `origdir` variable that PhysFS passes us. So that's good, too.
If PHYSFS_mountHandle() failed to mount a zip file, we would print
PhysFS's error message straight, without any surrounding context. This
seems a little weird, and doesn't maximize understanding for readers;
I've made it so now the error message is "Could not mount <zip file>:
<PhysFS error>".
When Ethan added PhysFS to the game, he put in a hardcoded check (marked
with a FIXME) that explicitly removed all filenames that were "data"
returned by PHYSFS_enumerateFiles(). Apparently this was due to a weird
bug with the function putting in "data" strings in its output in PhysFS
2.0.3; however, the game now uses PhysFS 3.0.2, and I could not
reproduce this bug on my system. (I also tested, and this also
straight-up ignores legitimate level filenames that just happen to be
"data" (without the .vvvvvv extension).)
After talking with Ethan in Discord DMs, I asked if we could remove this
check, and he said that we could. So I'm doing it now.
Just like I refactored text splitting to no longer use std::vectors,
std::strings, or temporary heap allocations, decreasing memory usage and
improving performance; there's no reason to use a temporary
heap-allocated std::vector to grab all extra binary blob indices, when
instead the iteration can just be more immediate.
Instead, what I've done is replaced binaryBlob::getExtra() with
binaryBlob::nextExtra(), which takes in a pointer to an index variable,
and will increment the index variable until it reaches an extra track.
After the caller processes the extra track, it is the caller's
responsibility to increment the variable again before passing it back to
getExtra().
This avoids all heap allocations and brings down the memory usage of
processing extra tracks.
If you configure the build with -DBUNDLE_DEPENDENCIES=OFF, then VVVVVV
will dynamically link with TinyXML-2 and PhysicsFS instead of using the
bundled source code in third_party/ and statically linking with them.
Unfortunately, it doesn't seem like distros package LodePNG, and LodePNG
isn't intended to be packaged, so we can't dynamically link with it, nor
can we use some system LodePNG header files somewhere else because those
don't exist.
UTF8-CPP is a special case, because no matter what, it's going to be
statically linked with the binary (it doesn't come as a shared object
file in any way). So with -DBUNDLE_DEPENDENCIES=OFF, we will use the
system UTF8-CPP header files instead of the bundled ones, but it will
still be statically linked in with the binary.
The main motivation for doing this is so if VVVVVV ever gets packaged in
distros, distro maintainers would be more likely to accept it if there
was an option to compile the game without bundled dependencies. Also, it
discourages modifying the third-party dependencies we have, because it's
always possible for someone to compile those dependencies without our
changes, with this CMake option.
This patch restores some 2.2 behavior, fixing a regression caused by the
refactor of properly using std::vectors.
In 2.2, the game allocated 200 items in obj.entities, but used a system
where each entity had an `active` attribute to signify if the entity
actually existed or not. When dealing with entities, you would have to
check this `active` flag, or else you'd be dealing with an entity that
didn't actually exist. (By the way, what I'm saying applies to blocks
and obj.blocks as well, except for some small differing details like the
game allocating 500 block slots versus obj.entities's 200.)
As a consequence, the game had to use a separate tracking variable,
obj.nentity, because obj.entities.size() would just report 200, instead
of the actual amount of entities. Needless to say, having to check for
`active` and use `obj.nentity` is a bit error-prone, and it's messier
than simply using the std::vector the way it was intended. Also, this
resulted in a hard limit of 200 entities, which custom level makers ran
into surprisingly quite often.
2.3 comes along, and removes the whole system. Now, std::vectors are
properly being used, and obj.entities.size() reports the actual number
of entities in the vector; you no longer have to check for `active` when
dealing with entities of any sort.
But there was one previous behavior of 2.2 that this system kind of
forgets about - namely, the ability to have holes in between entities.
You see, when an entity got disabled in 2.2 (which just meant turning
its `active` off), the indices of all other entities stayed the same;
the indice of the entity that got disabled stays there as a hole in the
array. But when an entity gets removed in 2.3 (previous to this patch),
the indices of every entity afterwards in the array get shifted down by
one. std::vector isn't really meant to be able to contain holes.
Do the indices of entities and blocks matter? Yes; they determine the
order in which entities and blocks get evaluated (the highest indice
gets evaluated first), and I had to fix some block evaluation order
stuff in previous PRs.
And in the case of entities, they matter hugely when using the
recently-discovered Arbitrary Entity Manipulation glitch (where crewmate
script commands are used on arbitrary entities by setting the `i`
attribute of `scriptclass` and passing invalid crewmate identifiers to
the commands). If you use Arbitrary Entity Manipulation after destroying
some entities, there is a chance that your script won't work between 2.2
and 2.3.
The indices also still determine the rendering order of entities
(highest indice gets drawn first, which means lowest indice gets drawn
in front of other entities). As an example: let's say we have the player
at 0, a gravity line at 1, and a checkpoint at 2; then we destroy the
gravity line and create a crewmate (let's do Violet).
If we're able to have holes, then after removing the gravity line, none
of the other indices shift. Then Violet will be created at indice 1, and
will be drawn in front of the checkpoint.
But if we can't have holes, then removing the gravity line results in
the indice of the checkpoint shifting down to indice 1. Then Violet is
created at indice 2, and gets drawn behind the checkpoint! This is a
clear illustration of changing the behavior that existed in 2.2.
However, I also don't want to go back to the `active` system of having
to check an attribute before operating on an entity. So... what do we
do to restore the holes?
Well, we don't need to have an `active` attribute, or modify any
existing code that operates on entities. Instead, we can just set the
attributes of the entities so that they naturally get ignored by
everything that comes into contact with it. For entities, we set their
invis to true, and their size, type, and rule to -1 (the game never uses
a size, type, or rule of -1 anywhere); for blocks, we set their type to
-1, and their width and height to 0.
obj.entities.size() will no longer necessarily equal the amount of
entities in the room; rather, it will be the amount of entity SLOTS that
have been allocated. But nothing that uses obj.entities.size() needs to
actually know the amount of entities; it's mostly used for iterating
over every entity in the vector.
Excess entity slots get cleaned up upon every call of
mapclass::gotoroom(), which will now deallocate entity slots starting
from the end until it hits a player, at which point it will switch to
disabling entity slots instead of removing them entirely.
The entclass::clear() and blockclass::clear() functions have been
restored because we need to call their initialization functions when
reusing a block/entity slot; it's possible to create an entity with an
invalid type number (it creates a glitchy Viridian), and without calling
the initialization function again, it would simply not create anything.
After this patch is applied, entity and block indices will be restored
to how they behaved in 2.2.
Just like is_positive_num(), an empty string is not a number.
I've also decided to unroll iteration 0 of the loop here so readability
is improved; this happens to also knock out the whole "accepting empty
string" thing, too.
To account for empty strings, we simply have to special-case them.
Simple as that.
This was also a problem with the previous std::string implementation of
this function; regardless, this is fixed now.
The current way "arrays" from XML files are loaded (before this commit
is applied) goes something like this:
1. Read the buffer of the contents of the tag using TinyXML-2.
2. Allocate a buffer on the heap of the same size, and copy the
existing buffer to it. (This is what the statement `std::string
TextString = pText;` does.)
3. For each delimiter in the heap-allocated buffer...
a. Allocate another buffer on the heap, and copy the characters from
the previous delimiter to the delimiter you just hit.
b. Then allocate the buffer AGAIN, to copy it into an std::vector.
4. Then re-allocate every single buffer YET AGAIN, because you need to
make a copy of the std::vector in split() to return it to the caller.
As you can see, the existing way uses a lot of memory allocations and
data marshalling, just to split some text.
The problem here is mostly making a temporary std::vector of split text,
before doing any actual useful work (most likely, putting it into an
array or ANOTHER std::vector - if the latter, then that's yet another
memory allocation on top of the memory allocation you already did; this
memory allocation is unavoidable, unlike the ones mentioned earlier,
which should be removed).
So I noticed that since we're iterating over the entire string once
(just to shove its contents into a temporary std::vector), and then
basically iterating over it again - why can't the whole thing just be
more immediate, and just be iterated over once?
So that's what I've done here. I've axed the split() function (both of
them, actually), and made next_split() and next_split_s().
next_split() will take an existing string and a starting index, and it
will find the next occurrence of the given delimiter in the string. Once
it does so, it will return the length from the previous starting index,
and modify your starting index as well. The price for immediateness is
that you're supposed to handle keeping the index of the previous
starting index around in order to be able to use the function; updating
it after each iteration is also your responsibility.
(By the way, next_split() doesn't use SDL_strchr(), because we can't get
the length of the substring for the last substring. We could handle this
special case specifically, but it'd be uglier; it also introduces
iterating over the last substring twice, when we only need to do it
once.)
next_split_s() does the same thing as next_split(), except it will copy
the resulting substring into a buffer that you provide (along with its
size). Useful if you don't particularly care about the length of the
substring.
All callers have been updated accordingly. This new system does not make
ANY heap allocations at all; at worst, it allocates a temporary buffer
on the stack, but that's only if you use next_split_s(); plus, it'd be a
fixed-size buffer, and stack allocations are negligible anyway.
This improves performance when loading any sort of XML file, especially
loading custom levels - which, on my system at least, I can noticeably
tell (there's less of a freeze when I load in to a custom level with
lots of scripts). It also decreases memory usage, because the heap isn't
being used just to iterate over some delimiters when XML files are
loaded.
These comments were probably remnants of some late-night coding session
or something. Anyway, they're not needed; there's nothing to do with SDL
here, and the "Init" is obvious because the function is a constructor.
Contents and scripts should be reset in editorclass::reset(); there's no
reason to reset them again right before you load them from an XML file
in editorclass::load().
Additionally, the resets now consistently use SDL_zeroa() (for contents)
and scriptclass::clearcustom() (for scripts).
I'm partial to slash-asterisk-style comments, so I'll use those here.
Also, having a space after the start of comments is good. I've also
removed the "Add the script if we have a preceding header" comments
since it can be inferred by reading the surrounding code.
Instead of checking the length() of an std::string, just check if
pText[0] is equal to '\0'.
This will have to be done anyway, because I'm going to get rid of the
std::string allocation here, and I noticed this inefficiency in the
indentation, so I'm going to remove it.
The actual unindent will be done in the next commit.
This now means every XML array loading is done with common,
re-duplicated code. The only exceptions to this are special cases other
than the the majority of cases; the majority being a simple matter of
reading an array of integers and putting it into another array.
Seems like the only reason I hadn't caught the <customlevelscore> tag
until now was because I was focused on de-duplicating all the array
loads in Game::loadstats() and below, forgetting about
Game::loadcustomlevelstats().
In order to be able to use the LOAD_ARRAY() and LOAD_ARRAY_RENAME()
macros in Game::loadcustomlevelstats(), they have to be moved to earlier
in the file.
Even if split() didn't use the STL, using this function here is a bit
unnecessary, because a simple SDL_strchr() suffices. Refactoring split()
to not use the STL will break this caller anyway, so I might as well
just refactor this to not use split() in the first place.
This refactor also properly checks if the inputs are valid integers. And
since split() is no longer used, it also rejects inputs ending with a
trailing comma as being invalid, too; this didn't happen previously.
It's intentional that I used is_number() here instead of
is_positive_num(), thus accepting negative numbers; in the future it
might be possible to have negative room coordinates.
Valgrind reported this.
The error here is that the buffer here is only guaranteed to be
initialized up until (and including) the null-terminator, by
SDL_snprintf(). Iterating over the entire allocated buffer is bad and I
should feel bad as the girl who wrote this code; doing that reads
uninitialized memory and passes it to SDL_tolower().
As a bonus, the iterator increment is now a preincrement instead of a
postincrement.
This fixes memory leaking every single time a file gets loaded(!) when
the list of custom levels gets loaded(!!!), which Valgrind reports. This
memory leak is completely my bad; 2.2 properly frees the loaded file,
and VCE uses an std::unique_ptr - which I decided to ignore and not
think about why it would be there.
It's safe to do this free after uMem gets copied into std::string;
although, in the future, I *am* thinking about refactoring this function
(and the tag finder function) to not use std::strings, and I'll have to
be careful to make sure that the memory management with the file is
correct when I do so.
This makes the freesrc argument of Mix_LoadMUS_RW() 1 instead of 0. If
the argument is nonzero, then the passed SDL_RWops will be automatically
freed when m_music is freed, too.
I don't know why this was 0 before. Setting it to 1 fixes a memory leak
that Valgrind reports (which turns into an actual leak every time custom
assets are mounted or unmounted).
This adds a check that the pointer passed to
FILESYSTEM_loadFileToMemory() isn't NULL, and if it is, just returns
early in the function, instead of continuing later and producing a
different, slightly-misleading error message.
Previously, it was guarded behind a check for the length, which is... I
guess still perfectly fine behavior, but there's no reason to have a
length check here; FILESYSTEM_freeMemory() uses SDL_free(), which does a
check that the pointer passed is non-NULL (the pointer that is passed
here, despite not being initialized upon declaration, is guaranteed to
be initialized by FILESYSTEM_loadFileToMemory() anyway, so).
Following Ethan's example of bailing (calling VVV_exit()) if
binaryBlob::unPackBinary() couldn't allocate memory, I've searched
through and found every SDL_malloc(), then made sure that if it returned
NULL, the caller would bail (because you can't do much when you're out
of memory).
There should probably be an error message printed when the process is
out of memory, but unPackBinary() doesn't print an error message for
being out of memory, so this can probably be added later. (Also we don't
really have a logging system, I'd like to have something like that added
in first before adding more messages.)
Also, this doesn't account for any allocators used by STL stuff, but
we're working on removing the STL, and allocation failure just results
in an abort anyway, so there's not really a problem there.
Wow, there are a lot of these. All of these exit paths now use
VVV_exit() instead, which attempts to save unlock.vvv and settings.vvv,
and also frees all resources so Valgrind is happy. This is a good thing,
because previously unlock.vvv/settings.vvv wouldn't be written to if we
decided to bail for a given reason.
It should be between the include of the corresponding header file for
the source file (Script.h) and the includes of other local header files
(the files that are specific to this codebase only); this is the
convention that includes in all other source files follow.
However, it seems like I misplaced this, so I'm fixing it now.
This is just a function that calls the cleanup() in main.cpp, as well as
calls exit().
I would have liked to use SDL_ExitProcess() here, because that function
has ifdefs for different runtime environments. But alas, it's an
internal function and isn't exported. Ah well; exit() seems to be fine
anyway.
If there's a resource that doesn't otherwise need to be cleaned up and
is still alive upon program shutdown, then it should go in cleanup().
This cleans up Screen, GraphicsResources, Graphics buffers, Graphics
tiles, and musicclass audio upon program shutdown.
Even we technically don't NEED to clean these resources up ourselves
(the kernel is going to get rid of all of it anyway, else it'd be a
security problem), I'm doing this because otherwise Valgrind will
complain about these, and then it'd be difficult to see which memory
leaks are real and which are just "well this isn't really a leak but you
haven't freed this thing when the process exited, and that's technically
what a memory leak is".
These are all resources whose cleanup functions can be safely called
even if they haven't initialized anything yet.
This isn't a memory leak (not even Valgrind complains), because it gets
properly cleaned up in GraphicsResources::destroy(). Still, it's memory
that is just laying around not being used, and in the name of
deallocating things as soon as you no longer need them, we should
deallocate the base tilesheet images after we split all of them into
tiles.
This reduces the memory cost of all tilesheet images by half, since we
were essentially keeping around duplicates for nothing; this doesn't
really have much of an impact with conventional tilesheet sizes, since
they're usually small enough, but since 2.3 allowed for tilesheet images
of any size, this is a pretty big deal for really big tilesheet images.
It's okay to do this, even though they also get freed in
GraphicsResources::destroy(), because SDL_FreeSurface() does a NULL
check on the pointer passed to it, and we set the pointer to NULL after
freeing the surfaces.
A quick glance at PhysFS source code will show that PhysFS will bail if
PHYSFS_deinit() is called if it's not initialized.
"Bail" here just means setting an error code and returning early, so
it's not that bad. Still, it's the principle of the thing, and I just
want to ensure that FILESYSTEM_deinit() can be safely called no matter
if the filesystem hasn't initialized yet; having an error set by PhysFS
kind of taints the whole safety thing, even if it does nothing wrong,
no?
(although, speaking of which, we should be handling all errors by
PhysFS, but that's for later...)
These FIXME comments are still correct about code duplication, but
they're incorrect about where exactly the original code is after the
original code got moved around. So I've fixed them to refer to the
correct locations.
We really should get around to de-duplicating the code mentioned in
these comments...
Since musicWriteBlob is a temporary object that gets destroyed at the
end of musicclass::init(), in order to make sure we don't leak memory
and lose all the pointers to the blocks we just allocated in
musicWriteBlob, we need to call its clear() method after writing
BinaryMusic.vvv.
musicReadBlob was used for both MMMMMM and PPPPPP soundtracks. This
causes a memory leak if you have mmmmmm.vvv installed, because the
pointers holding each allocated block of MMMMMM would be lost when
PPPPPP got loaded. Valgrind complains about this memory leak.
This is in contrast to 2.2 and previous behavior, where musicReadBlob
was only a temporary object instead of being held in musicclass.
However, this wasn't really a memory leak (moreso something that just
didn't get cleaned up when closing the game), but it did get turned into
a leak when per-level assets mounting and unmounting got introduced in
2.3 (loading a level with custom assets after starting the game with an
mmmmmm.vvv, or exiting out of a level that had an mmmmmm.vvv, would
cause the game to leak memory). Leo recognized this, and moved
musicReadBlob onto musicclass in a separate 2.3 PR, but either he didn't
think about what was happening here too closely, or he didn't use
Valgrind, because he forgot about the memory leak caused by re-using the
same binaryBlob for PPPPPP and MMMMMM.
So instead, just use two different binaryBlob objects for MMMMMM and
PPPPPP. That way, no memory leaks happen.
I'm going to introduce another binaryBlob object in to the mix, and I
want to be able to re-use an existing FOREACH_TRACK #define without
having to copy-paste it again. So, TRACK_NAMES now takes in a blob
parameter, which will be passed to the temporary FOREACH_TRACK #define.
This removes the music cleanup code from musicclass::init(), and
requires that we also call destroy() in Graphics::reloadresources().
This is because we'll need to re-use the musicclass cleanup code
elsewhere, and we don't want to copy-paste the cleanup code. Or at
least, I don't (but I'm not a game dev, game devs copy-paste all the
friggin' time).
It doesn't feel quite write leaving all the buffer creation code in
main(), even though it's perfectly okay to do so and it doesn't result
in any memory mismanagement that Valgrind can report; so I'm factoring
all of it out to a separate function, Graphics::create_buffers().
As a bonus, we no longer have to keep qualifying with `graphics.` in the
buffer creation code, which is nice.
These destroy all the buffers that are created on the Graphics class.
Since these buffers can't be created at the same time as the rest of
Graphics is (due to the fact that they require knowing the pixel format
of the game screen), they can't be destroyed at the same as the rest of
Graphics is, either.
This is a very complicated way of zeroing out grphx (instead of using
SDL_zero()), which itself is completely unnecessary because grphx.init()
gets called immediately afterwards anyway.
It should be next-line brace, not same-line brace. Even in a codebase
that uses same-line braces everywhere, I still prefer having next-line
braces inside functions (because they're at the top level, and you can't
next them). But regardless, this should still be next-line brace like
(most of) the rest of the codebase.
The function previously conditionally freed a m_memblocks pointer if its
corresponding m_headers was valid. This makes me slightly worried about
the possibility that memory would be allocated, but the header would
still be marked as invalid.
I don't see how that could happen, but it's better to be safe than
sorry. SDL_free() does a guaranteed NULL pointer check (like most SDL
functions), so it's okay to pass NULL pointers to it.
Just to be sure, I'm also zeroing m_memblocks and m_headers after
freeing everything in the function.
MSVC complains about these, doesn't seem like GCC does. These can be
safely removed because they're unreachable, and they always follow a
case-switch or similar that has a default case which this code is a
duplicate of anyway. (Unless it isn't, in which case all the better to
remove it, becausee otherwise it looks misleading or confusing to casual
glances at the code.)
find_tag() would commit out-of-bounds indexing if someone made a level
file with malformed XML entity encodings in the metadata tags.
This would happen if the end of the string followed immediately after an
ampersand and hash, or if there wasn't a semicolon ending an XML entity.
Valgrind complains about these, so I've fixed it.
This fixes a bug where "12" gets properly evaluated as 12, but "148"
gets evaluated as 1408. It's because `place` gets multiplied by `radix`
again, so `retval` gets multipled by 100 instead of 10.
There's no reason to have a `place` variable, so I've removed it
entirely. This simplifies the function a little bit.
The previous person who wrote this (a girl named Misa) clearly didn't
understand the reason why you couldn't compare line[line.length()-1]
directly to a string literal. It's because the former is a char, and the
latter is a pointer to a char. Both are ints, so it compiles fine, but
it doesn't do what you want it to.
Why not just make the latter a char instead of a string literal? Well,
because you can, but also I clearly didn't think this through earlier,
so that's why I didn't do it in the first place.
But this is fixed now.
This avoids an unnecessary copy of the input std::vector, since we don't
need to modify it for anything. This cuts down on unnecessary memory
operations.
Apart from the std::string, this function no longer uses the STL.
ss_toi() is a simple function - it converts the input into an int,
taking as many digits as possible until it reaches a non-digit
character, at which point it stops. It's trivial to implement this
without the STL.
I could've used Int() here, but that would've required copying the
string to a temporary buffer to insert a null-terminator (we can't just
use a pointer-and-length data type either, the string functions don't
operate like that - one disadvantage of C strings!). Instead, I decided
to implement my own conversion to int here, because I don't think the
way we humans write our Arabic numerals is going to change anytime soon.
Also, the std::string input is now passed by const reference, instead of
making a copy - cutting down on unnecessary memory operations.
I personally like putting the asterisk with the type, because despite
the language parsing the asterisk as a part of the name, the pointer
part is clearly a part of the return type of the function. Also,
put constness here, to indicate that the input won't be modified inside
the function.
This comment indicates that the function is used by
UtilityClass::GCString(). Which is unnecessary, because the reader can
trivially search for usages of GCChar in the file itself (the 'static'
preceding the function should be a good enough hint) - and if there
aren't any, then the reader will know the function is unused, whereas if
they read the comment, they would have been under the assumption that it
wasn't used. (There might also a compiler warning about it being unused,
which would be more confusing if the comment was still there.)
Point is, comments can get outdated, so removing the comment here makes
the code more self-documenting.
This is a re-do of 942217f871 (#509), but
with a more conservative fix that only resets the player's newxp and
newyp when they respawn from a checkpoint or spawn in to the map.
Unlike the previous patch, if the player were to suddenly collide with a
conveyor or horizontally-moving platform during gameplay, their
y-position would revert back to the intended next y-position of the
previous frame. But this is the same behavior as before, I haven't ever
seen such a contrived situation come up, and this behavior is probably
more preferable for gameplay than actually going to the conveyor, so
it's fine.
I also decided to reset newxp here, and not just newyp, because while
resetting newyp seems to be enough, it's safer to also reset newxp (and
so future readers won't question why only newyp is reset but not newxp).
I tested this and it once again fixes the death loop issue from earlier,
while also still allowing for that Trench Warfare trick to be possible
(I tested it with the libTAS movie I mentioned in #606; it syncs fine).
There are no other known regressions resulting from this fix
(hopefully).
This reverts commit 942217f871.
This fix (of a regression of a fix) has a regression where immediately
flipping off of horizontally-moving platforms or conveyors will no
longer provide you with a "boost" given certain vertical pixel
alignments.
The regression that this fix fixed will be fixed another way.
Fixes#606.
This works on macOS, Wayland, and a few more esoteric platforms. X11
doesn't have a concept of DPI-awareness. Note that with this flag
SDL_GetWindowSize() isn't guaranteed to return the actual window size.
Retextured checkpoints have always been in the game, but clicking on
them in the editor would lead to them losing their retextured-ness. So,
checkpoints should be left alone if their p1 isn't either 0 or 1. Also,
they don't show up properly in the editor, so that's fixed, too.
Retextured and flipped terminals were added in 2.3, and show up properly
in-game, but don't properly show up in the editor, either. So now they
show up in the editor. Additionally, clicking on them will flip the
terminal as well, but only if its p1 is 0 or 1, just like checkpoints
now do.
This call to Makebfont() always existed, but ever since 2.3's per-level
custom assets were added, graphics.reloadresources() also calls
graphics.Makebfont(), meaning this call is unnecessary. Calling it twice
results in graphics.bfont and graphics.flipbfont having twice the number
of elements, until custom assets get mounted (or unmounted, technically).
This does the same thing as the last commit, but for No Death Mode
instead of Time Trials. Whenever you die in No Death Mode, or complete
it, all the relevant variables get copied to variables prefixed with
'ndmresult' that never get reset by script.hardreset(), and these
variables are what titlerender() use, instead of the "live" ones.
This makes it so when a Time Trial gets completed, all the relevant
variables get copied onto variables prefixed with 'timetrialresult',
which never get reset by script.hardreset(). Then titlerender() will use
those variables accordingly.
There are multiple different exit paths to the main menu. In 2.2, they
all had a bunch of copy-pasted code. In 2.3 currently, most of them use
game.quittomenu(), but there are some stragglers that still use
hand-copied code.
This is a bit of a problem, because all exit paths should consistently
have FILESYSTEM_unmountassets(), as part of the 2.3 feature of per-level
custom assets. Furthermore, most (but not all) of the paths call
script.hardreset() too, and some of the stragglers don't. So there could
be something persisting through to the title screen (like a really long
flash/shake timer) that could only persist if exiting to the title
screen through those paths.
But, actually, it seems like there's a good reason for some of those to
not call script.hardreset() - namely, dying or completing No Death Mode
and completing a Time Trial presents some information onscreen that
would get reset by script.hardreset(), so I'll fix that in a later
commit.
So what I've done for this commit is found every exit path that didn't
already use game.quittomenu(), and made them use game.quittomenu(). As
well, some of them had special handling that existed on top of them
already having a corresponding entry in game.quittomenu() (but the path
would take the special handling because it never did game.quittomenu()),
so I removed that special handling as well (e.g. exiting from a custom
level used returntomenu(Menu::levellist) when quittomenu() already had
that same returntomenu()).
The menu that exiting from the level editor returns to is now handled in
game.quittomenu() as well, where the map.custommode branch now also
checks for map.custommodeforreal. Unfortunately, it seems like entering
the level editor doesn't properly initialize map.custommode, so entering
the level editor now initializes map.custommode, too.
I've also taken the music.play(6) out of game.quittomenu(), because not
all exit paths immediately play Presenting VVVVVV, so all exit paths
that DO immediately play Presenting VVVVVV now have music.play(6)
special-cased for them, which is fine enough for me.
Here is the list of all exit paths to the menu:
- Exiting through the pause menu (without glitchrunner mode)
- Exiting through the pause menu (with glitchrunner mode)
- Completing a custom level
- Completing a Time Trial
- Dying in No Death Mode
- Completing No Death Mode
- Completing an Intermission replay
- Exiting from the level editor
- Completing the main game
Comments in general don't get verified by the compiler, but
commented-out code is even worse. Especially since this looks to be
outdated code.
As always, if we need some of this code, then we can just look back in
the Git history.
This fixes a segfault, because we would then pass compressed image data
to SDL_ConvertSurfaceFormat() in LoadImage(). I didn't test my previous
PR. Whoops.
Implicit conversion warnings happen all over the codebase, but there's
no reason to warn on all of them, and adding casts everywhere is
annoying to read and patently unnecessary.
MSVC is the only compiler that has this warning (GCC even on -Wall
-Wextra doesn't warn about implicit conversions), so disable it for
MSVC.
While compiling in release mode, GCC warns about these two potentially
being used uninitialized further down. The only way this could happen is
if the case-switches below didn't match up with a case, which would
require the game to be in an invalid state (and have invalid values for
rcol and spcol), but it's better to be safe than sorry.
The only thing we need LodePNG for is to decode a PNG that we've already
loaded into memory. We handle the filesystem part ourselves, so we don't
need LodePNG's filesystem functions; we don't encode images, and we
don't use the zlib functions. So disable all of those.
During 2.3 development, there's been a gradual shift to using SDL stdlib
functions instead of libc functions, but there are still some libc
functions (or the same libc function but from the STL) in the code.
Well, this patch replaces all the rest of them in one fell swoop.
SDL's stdlib can replace most of these, but its SDL_min() and SDL_max()
are inadequate - they aren't really functions, they're more like macros
with a nasty penchant for double-evaluation. So I just made my own
VVV_min() and VVV_max() functions and placed them in Maths.h instead,
then replaced all the previous usages of min(), max(), std::min(),
std::max(), SDL_min(), and SDL_max() with VVV_min() and VVV_max().
Additionally, there's no SDL_isxdigit(), so I just implemented my own
VVV_isxdigit().
SDL has SDL_malloc() and SDL_free(), but they have some refcounting
built in to them, so in order to use them with LodePNG, I have to
replace the malloc() and free() that LodePNG uses. Which isn't too hard,
I did it in a new file called ThirdPartyDeps.c, and LodePNG is now
compiled with the LODEPNG_NO_COMPILE_ALLOCATORS definition.
Lastly, I also refactored the awful strcpy() and strcat() usages in
PLATFORM_migrateSaveData() to use SDL_snprintf() instead. I know save
migration is getting axed in 2.4, but it still bothers me to have
something like that in the codebase otherwise.
Without further ado, here is the full list of functions that the
codebase now uses:
- SDL_strlcpy() instead of strcpy()
- SDL_strlcat() instead of strcat()
- SDL_snprintf() instead of sprintf(), strcpy(), or strcat() (see above)
- VVV_min() instead of min(), std::min(), or SDL_min()
- VVV_max() instead of max(), std::max(), or SDL_max()
- VVV_isxdigit() instead of isxdigit()
- SDL_strcmp() instead of strcmp()
- SDL_strcasecmp() instead of strcasecmp() or Win32 strcmpi()
- SDL_strstr() instead of strstr()
- SDL_strlen() instead of strlen()
- SDL_sscanf() instead of sscanf()
- SDL_getenv() instead of getenv()
- SDL_malloc() instead of malloc() (replacing in LodePNG as well)
- SDL_free() instead of free() (replacing in LodePNG as well)
This patch de-duplicates the tool drawing code a bit in the menu that
gets brought up when you press Space in the level editor, as well as
fixes several bugs related to the fact that the original author(s) of
the code decided to copy-paste everything. (It was most likely Terry,
judging by the distinct lack of whitespace between tokens in the code.)
There are two "pages" of tools that get shown when you open the tool
menu, according to your currently-selected tool.
1. On the first page, your currently-selected tool gets a brighter
outline. However, on the second page, the code to draw the outline over
your currently-selected tool is missing. So I've fixed that.
2. On the first page, the glyph indicator next to the tool icon also
gets brighter when you have that tool selected. However, on the
second page, the code that drew the brighter-colored indicator got
ran before the code that drew the normal-colored indicator, so this
was never shown. This is also fixed.
3. The glyph indicator of the gravity line tool didn't get brighter when
you had it selected, due to its special-cased copy-pasted code
drawing its brighter color before drawing its normal color. This has
also been fixed.
4. Lastly, the tool menu no longer draws the brighter-colored glyphs on
top of the normal-colored glyphs. Instead, the menu will simply draw
the brighter-colored glyphs and will not draw the normal-colored
glyphs in the first place. This is because double-drawing text like
this will look bad if the user has a custom font.png that has
translucent pixels, like I do.
All of these bugs have been fixed by paying off the technical debt of
copy-pasting code.
This variable seems to have been intended to make sure
game.savestatsandsettings() was called at the end of the frame, or make
sure that it didn't get called more than once per frame. I don't see any
frame ordering-related reason why it needs to be called specifically at
the end of the frame (the function doesn't modify any state), so it's
more plausible that it was added to make sure it didn't get called more
than one per frame.
However, upon further analysis, none of the code paths where
game.savemystats is used ever calls or sets game.savemystats more than
once, and a majority of the code directly calls
game.savestatsandsettings() anyway, so there's no reason for this
variable to exist. If we ever need to make sure it doesn't get called
more than once, and there's no way to change the code paths around to
prevent it otherwise, we can use the defer callbacks system that I added
to #535, when it gets merged.
These variables basically serve no purpose. map.customx and map.customy
are clearly never used. map.finalx and map.finaly, on the other hand,
are basically always game.roomx and game.roomy respectively if
map.finalmode is on, and if it's off, then they don't matter.
Also, there are some weird and redundant variable assignments going on
with these; most notably in map.gotoroom(), where rx/ry (local
variables) get assigned to finalx/finaly, then finalx/finaly get
assigned to game.roomx/game.roomy, then finalx/finaly get assigned to
rx/ry. If finalx/finaly made a difference, then there'd be no need to
assign finalx/finaly back to rx/ry. So it makes the code clearer to
remove these weird bits of code.
2.3's per-level assets feature also added a hotkey to reload the custom
assets of the level you're currently editing in the editor, so you
wouldn't have to re-load the level yourself. This hotkey is F9, but
however, it hasn't been documented in the hotkey list brought up by
pressing Shift, until now.
This patch cleans up unnecessary exports from header files (there were
only a few), as well as adds the static keyword to all symbols that
aren't exported and are specific to a file. This helps the linker out in
not doing any unnecessary work, speeding it up and avoiding silent
symbol conflicts (otherwise two symbols with the same name (and
type/signature in C++) would quietly resolve as okay by the linker).
Line clipping and second-frame edge-flipping have been broken since #539
was merged (d910c5118d). The cause of this
is moving the onground/onroof code around.
A proper loop order fix is going to come once #535 gets finalized and
merged, so this is a stopgap measure just to make sure people don't
report that line clipping or second-frame edge-flipping are broken in
current builds of 2.3.
There is a certain ordering of which corners you click on to place enemy
and platform boundaries, and script boxes. You must first click on the
top-left corner, then click on the bottom-right corner. The visual box
that is drawn after you've first clicked on the top-left corner clearly
shows this intended way of doing things.
However, it seems like despite the visuals, the game didn't properly
prevent you from clicking on the corners in the wrong way. If you placed
it from top-right to bottom-left, or bottom-left to top-right, then the
game would place the boxes accordingly, and they would have a weird
shape where two of its opposite sides would just be missing. But,
placing them from bottom-right to top-left is prevented accordingly.
The bug comes down to a simple use of "or", instead of the correct
"and". This isn't the first time the wrong conjunction was used in a
conditional... (8260bb2696, #136)
Since the code block that the if-statement guards is the code that will
execute if the corners placed were correct, the if-statement thus should
be written in the positive case and use a more restrictive "and",
instead of the negative case, which would use a more looser "or". There
are less cases that are correct than cases which are incorrect - in this
case, there is only 1 correct way of doing things (top-left to
bottom-right), compared to 3 incorrect ways of doing things (top-right
to bottom-left, bottom-left to top-right, bottom-right to top-left) - so
when thinking of positive cases, you should be using "and".
Or, you can always just test it. This bug has been in the game since
2.0, so it seems like no one just tested that incorrect input actually
didn't work.
Ever since 2.0, the colors of some of the Time Trial trophies in the
Secret Lab don't correspond to the crewmate of the given level. The
trophy for the Tower uses Victoria's color, and the Lab trophy uses
Vermilion's color. The Space Station 2 trophy uses Viridian's color, and
the Final Level trophy uses Vitellary's color.
This doesn't appear to be intentional, and it would be odd if it was,
since this game matches the colors everywhere else (each zone on the map
is colored with their respective crewmate in mind, for instance). Also,
the Lab trophy has the sad expression, which is Victoria's trait - it
would be weird if this was intended for Vermilion instead.
But the biggest piece of evidence that this was unintentional is the
corresponding comment for each color in Graphics::setcol(). It mislabels
yellow as cyan, cyan as yellow, blue as red, and red as blue.
To fix this, I simply have to set the correct color for each trophy in
case 25 of entityclass::createentity(). I could fix it in
Graphics::setcol() itself, but custom levels might depend on those
certain colors being the way they are, so it's a safer bet to just fix
it in the trophy creation case itself.
The diff of this might look weird. Even though all I'm doing is changing
some value assignments around, it looks like the "patience" algorithm
thinks I'm moving a whole case of the trophy switch-case around.
So... it looks like being able to switch through tilesets backwards has
been in 2.3 for a while, guess no one just uses 2.3 or the level editor
that much. It seems like it's always been broken, too.
If you were on the Space Station tileset (tileset 0), pressing Shift+F1
would keep you on the Space Station tileset instead of switching to the
Ship (tileset 4).
It looks like the problem here was mixing size_t and int together - so
the modulus operation promoted the left-hand side to size_t, which is
unsigned, so the -1 turned into SIZE_MAX, which is 18446744073709551615
on my system. You'll note that that ends in a 5, so the number is
divisible by 5, meaning taking it modulo 5 leads to 0. So the tileset
would be kept at 0.
At least unsigned integer underflow/overflow is properly defined, so
there's no UB here. Just careless type mixing going on.
The solution is to make the modulus an int instead of a size_t. This
introduces an implicit conversion, but I don't care because my compiler
doesn't warn about it, and implicit conversion warnings ought to be
disabled on MSVC anyway.
This fixes a bug where if you entered a tower before watching the
credits sequence, the credits sequence would have mismatched text and
background colors.
This bug happened because entering a tower modified the r/g/b attributes
of mapclass, and updated graphics.towerbg, without updating
graphics.titlebg too. Then gamecompleterender() uses the r/g/b
attributes of mapclass.
The solution is to put the r/g/b attributes on TowerBG instead. That
way, entering a tower will only modify the r/g/b attributes used to
render towers, and won't affect the r/g/b attributes used to render the
credits sequence.
Additionally, I also de-duplicated the case-switch that updated the
r/g/b attributes based off of the current colstate, because it got
copy-pasted twice, leading to three instances of one piece of code.
This fixes a bug where if you completed a custom level during
command-line playtesting, when returning to the title screen, the
background would be red and the text would be white.
This is because playtesting skips over the code path of pressing ACTION
to start the game and advance to the title screen, and the code path of
that ACTION press specifically initializes the title screen colors to
cyan.
This is also caused by the fact that completing a custom level doesn't
call map.nexttowercolour(), but my guess is that the intent there was
that the player would select a custom level, complete it, and return to
the title screen on the same screen with the same colors, so I decided
not to add a map.nexttowercolour() there.
Instead, I've moved the cyan color initialization to main(), so that it
is always executed no matter what, and doesn't require you to take a
specific code path to do it.
With commit 48313169b6 (PR #453),
AllyTally added a single-case patch for a regression, instead of fixing
it at its root cause.
In fact, that commit only fixes the music if Presenting VVVVVV is
playing while exiting to the menu, not if you enter a level that plays
Presenting VVVVVV - so it only fixes it going one way, and not going the
other way around; neither fixing also all the other cases this could
happen.
It doesn't, say, fix the case where you are exited to the menu
automatically after collecting the last crewmate in the level (or if the
level calls gamestate 1013 itself), which is what happens in my MIRA-VIU
TAS video at the end, and which I noted in the description of that video
( https://www.youtube.com/watch?v=OYQO4ePbYW4&t=111 ).
So, the problem here is that when musicclass::play() is called, it sees
that currentsong is the same as its input, and decides that since the
music is already playing, it shouldn't play the music again. Thus, the
music fades out, and we get silence instead of the music playing again.
But I said this was a regression. Why didn't this happen in 2.2? Well,
it's because of the fact that 2.2 sets currentsong to -1 (no music
playing at all) immediately when starting a fadeout, and not when the
fadeout completes (commit facb079b35,
PR #316). As you can imagine, this discrepancy could lead to bugs, given
that the game would think that music wasn't playing when in actuality it
was, but fixing this bug could also break code that expected this wrong
behavior. And in this case, it has.
So to properly fix the root cause of this, instead of naïvely
single-case patching out every case that comes up randomly, in
musicclass::play(), the function will now ignore if the input given is
the same as currentsong if the music is currently fading out.
This reverts commit 48313169b6, "Don't
fade music out when returning to the menu if it's Presenting VVVVVV".
This commit is being reverted because it is only a single-case patch -
that is, it fixes only a single symptom of the bug, and not its
underlying cause.
This is also another conditional where the rest of the function is
nested. Furthermore, in order to not repeat ourselves, I've also decided
to unconditionally assign currentsong to t, because if t is -1
currentsong gets assigned to -1 anyway - so it's the same thing, but
it's much easier to see and think about.
This removes an indentation level, and makes it easier to reason about
the function since you essentially now view it as the function returning
right there.
This prevents issues when calling std::abs with a float on some older
compilers. While it would normally be promoted to an int, std::abs is
special due to being overloaded despite being a C function. This can
cause errors due to the compiler being unable to find a float overload.
SDL_abs doesn't have this problem, since it's a normal C function.
When gamemode(teleporter) gets run in a script, it brings up a read-only
version of the teleporter screen, intended only for displaying rooms on
the minimap.
However, ever since 2.3 allowed bringing up the map screen during
cutscenes (in order to prevent softlocks), bringing up the map screen
during this mode would (1) do an unnecessary animation of suddenly
switching back to the game and bringing up the menu screen again (even
though the menu screen has already been brought up), and (2) would let
you close the menu entirely and go back to GAMEMODE, thus
unintentionally closing the teleporter screen and kind of ruining the
cutscene.
To fix this, when you bring up the map screen, it will instead instantly
transition to the map screen. And when you bring it down, it will also
instantly transition back to the teleporter screen.
But that's not all. The previous behavior was actually kind of a nice
failsafe, in that if you somehow got stuck in a state where a script ran
gamemode(teleporter), but stopped running before it could take you out
of that mode by running gamemode(game), then you could return to
GAMEMODE yourself by bringing up the map screen and then bringing it
back down. So I've made sure to keep that failsafe behavior, only as
long as there isn't a script running.
When bringing up the map screen, the game does a small menu animation
where the menu comes in from the bottom. The code to calculate the menu
offset is copy-pasted everywhere, so I thought I'd de-duplicate it to
make my life easier when working with it. I also included the
game.gamestate assignment in the de-duplicated function, so it would be
easier for a future bugfix.
At the same time, I'm also removing all the BlitSurfaceStandard()s that
copied menubuffer to backBuffer. The red flag is that this blit happened
for every single entry point to MAPMODE and TELEPORTERMODE, except for
the script command gamemode(teleporter). Pressing Enter to bring up the
map screen, pressing Enter to quit the Super Gravitron, pressing Esc to
bring up the pause screen, and pressing Enter to bring up the teleporter
screen all do this blit, so if this blit was there to fix a bug, then
there's a bug with using the script command gamemode(teleporter)... but,
as far as I can tell, there isn't.
That's because the blit basically does nothing. All the blit does is
copy menubuffer onto backBuffer. Then the next thing that happens is
that either maprender() or teleporterrender() will be called, and the
first thing that those functions will always do is fill backBuffer with
solid black, completely overriding the previous blit. So that's why
removing this blit won't have any effect, and it can be safely removed
for code clarity.
When I did #569, I forgot that taking out the code path that set the
player's invis to false meant that the player would still be invisible
upon loading back in to the game if they exited the game while
invisible. Taking out that code path also meant that if game.lifeseq was
nonzero, it wouldn't be reset properly, either. So this fixes those
things.
When I did #567, I didn't test it. And I should have tested it, because
it made the player invisible. This is because map.resetplayer() also
sets the invis attribute of the player to true as well, and I only undid
it setting game.lifeseq to 10.
So instead, I'll just add a flag to map.resetplayer() that by default
doesn't set game.lifeseq or the player's invis attribute. And I tested
it this time, and it works fine. I tested both respawning after death
and exiting to the menu and loading in the game again.
When exiting a level, music.init() gets called again, and every time it
gets called after the first time it gets called, it will free all music
tracks.
To do so, it calls Mix_FreeMusic(). Unfortunately, if there is music
fading, Mix_FreeMusic() will call SDL_Delay(), which will result in
annoying no-draw frames. Meaning, the screen freezes and doesn't draw
anything, and has to wait a bit before continuing.
Here's the relevant piece of code from SDL2_mixer's music.c:
if (music == music_playing) {
/* Wait for any fade out to finish */
while (music->fading == MIX_FADING_OUT) {
Mix_UnlockAudio();
SDL_Delay(100);
Mix_LockAudio();
}
if (music == music_playing) {
music_internal_halt();
}
}
This is especially annoying if you're a TASer, because no-draw frames in
a libTAS movie aren't guaranteed to last for a consistent number of
frames when you change your inputs around.
After this patch, as long as your computer can unmount and re-mount
assets fast enough (it doesn't seem like mine can, unfortunately), then
you won't get any freezes when exiting a level that has custom assets.
(This freeze didn't happen when loading a level because the title screen
music fadeout upon pressing ACTION had enough time to fully complete
before the level got loaded.)
There's a small inconsistency where the first time you load in to the
game, game.lifeseq is at 0, but when you exit to the menu and load in
again, game.lifeseq becomes 10. This is visible as Viridian blinking
when loading in only after the first time you load in, and this also
means that after the first time you load in, you also have to wait 5
frames before being able to move Viridian.
The reason for this inconsistency is because on the first time you load
in to the game, there are no entities loaded in obj.entities yet, so the
game creates a player entity, and doesn't mess with game.lifeseq. When
you exit and then load in for the second time, obj.entities contains at
least one entity (all the entities from the room you just exited out of
- map.gotoroom() hasn't even been called yet, so it doesn't even check
for only the player entity), so the game calls map.resetplayer()
instead, and map.resetplayer() sets game.lifeseq to 10.
There's even an inconsistency to this inconsistency - when you die in No
Death Mode, all entities will be removed from obj.entities, so the next
time you load in to the game, game.lifeseq will be 0.
This inconsistency is pretty minor in the grand scheme of things, but
it still bothers me, so I'm going to fix it.
CI builds were added to this repository on the first day it was
released, and haven't really been touched since then. And since then,
2.3 has added NO_CUSTOM_LEVELS, NO_EDITOR, and OFFICIAL_BUILD builds to
the CMake file.
On top of the MAKEANDPLAY define already existing, this means CI
coverage is a bit sparse - covering compile failures for changes made to
most of the codebase, except for Steam and GOG, and not covering compile
failures if certain parts of the code get stripped out. And people do
forget to check for those configurations as well.
These mess of configurations is kind of a wake-up call to refactor and
generalize the code a bit, because we would probably be able to get rid
of at least two of these (Make & Play, and no-custom-levels) by making
it so custom levels behave indistinguishably from the main game. But,
that's something to do in 2.4. At the very least, we should cover these
in CI right now.
On a small note, I had to add a MAKEANDPLAY configure option to the
CMake file to be able to easily configure a Make & Play build from the
CI runner. This option shouldn't really be used otherwise, so I added a
note to it telling people to consider modifying MakeAndPlay.h instead.
Since INTERIM_COMMIT is a char array whose size we know for sure at
compile time, and which we also know is an array (instead of being a
pointer), we can take the SDL_arraysize() of it. However,
SDL_arraysize() doesn't account for the null terminator unlike
SDL_strlen(), so we'll have to do it ourselves. But at least we are
guaranteed to get a constant value at compile time, unlike if we use
SDL_strlen(), which would be repeatedly evaluating a constant value at
runtime.
To my knowledge, there's no equivalent SDL_arraysize() for constant
strings, and a quick `rg` (ripgrep) for "sizeof" in the SDL include/
folder doesn't show anything like that. So we'll just have to use the
SDL_arraysize() - 1 and deal with it.
The commit hash is now properly updated every time it gets changed, and
not just when CMake gets re-ran.
For this to work, we need to use a few CMake tricks. We add a custom
target with ADD_CUSTOM_TARGET(), which is apparently always considered
out-of-date (but I had to add a BYPRODUCTS line to get it to actually
work), and we use the target to run a .cmake file every time we build.
Also, VVVVVV needs to depend on this custom target, to ensure that the
game gets built AFTER the version gets generated - otherwise there'll be
an error. So we do an ADD_DEPENDENCIES() after the ADD_EXECUTABLE() for
VVVVVV.
This file, version.cmake, is just the Version.h.out generation that I
added previously, but the important thing about all of this is that if
the contents of Version.h.out doesn't change, and thus if the commit
hash hasn't changed, then CMake will never recompile and relink anything
at all. (At least with the Ninja generator.)
On a small note, since the Version.h.out generation is now a separate
script that is guaranteed to get ran on every single build, while the
Git FIND_PACKAGE() gets ran only at configure time, it is possible for
the cached path of the Git executable to get out of date. Fixing this
requires a simple re-configure (ideally), but in case it wasn't fixed,
the INTERIM_COMMIT and COMMIT_DATE variables would get set to empty
strings instead of containing a value. To prevent this from happening,
I've removed ERROR_QUIET from the EXECUTE_PROCESS() calls in
version.cmake, because it's better to explicitly error if the Git
executable wasn't found than implicitly carry on like nothing happened.
The previous implementation of showing the commit hash on the title
screen used a preprocessor definition added at CMake time to pass the
hash and date. This was passed for every file compiled, so if the date
or hash changed, then every file would be recompiled. This is especially
annoying if you're working on the game and switching branches all the
time - the game has at least 50 source files to recompile!
To fix this, we'll switch to using a generated file, named
Version.h.out, that only gets included by the necessary files (which
there is only one of - Render.cpp). It will be autogenerated by CMake
(by using CONFIGURE_FILE(), which takes a templated file and does a
find-and-replace on it, not unlike C macros), and since there's only one
file that includes it, only one file will need to be recompiled when it
changes.
And also to prevent Version.h.out being a required file, it will only be
included if necessary (i.e. OFFICIAL_BUILD is off). Since the C
preprocessor can't ignore non-existing include files and will always
error on them, I wrapped the #include in an #ifdef VERSION_H_EXISTS, and
CMake will add the VERSION_H_OUT_EXISTS define when generating
Version.h.out. The wrapper is named Version.h, so any file
that #includes the commit hash and date should #include Version.h
instead of Version.h.out.
As an added bonus, I've also made it so CMake will print "This is
interim commit [HASH] (committed [DATE])" at configure time if the game
is going to be compiled with an interim commit hash.
Now, there is also the issue that the commit hash change will only be
noticed in the first place if CMake needs to be re-ran for anything, but
that's a less severe issue than requiring recompilation of 50(!) or so
files.
While working on #535, I noticed this bug.
When going to Graphic Options or Game Options from the pause menu,
kludge_ingametemp was intended to save the current menu stack frame
BEFORE either of those menus got created. However, it was actually
assigned afterwards, meaning kludge_ingametemp would always be either
Menu::graphicoptions or Menu::options.
This meant that the returntomenu() in returntopausemenu() would always
attempt to return to the current in-game menu, and seeing as it's the
same menu, would re-create the menu, instead of returning to the
previous menu before it.
This patch also fixes a potential source of a trivial memory leak, if
someone were to keep entering and exiting Graphic Options or Game
Options from the pause menu. It would keep piling up duplicate Graphic
Options or Game Options stack frames, which would never get removed.
However, they do get removed when you exit to the menu properly, by
returntomenu() again, so this doesn't seem like that serious of an
issue, but it's still good to fix.
While I was working on #535, I noticed that all the call sites of
script.run() have the exact same code, namely:
if (script.running)
{
script.run();
}
I figured, why not move the script.running check into the function
itself? That way, we won't have to duplicate the check every single
time, and we don't risk forgetting to add the check and causing a bug
because of that.
The check was already duplicated once since 2.0 (it's used in both
GAMEMODE and TELEPORTERMODE), and with the fix of the two-frame delay in
2.3, it's now duplicated twice, leading to THREE instances of this check
in the code, when there should be only one.
To fix this bug, all we have to do is just pass the existing
ScreenSettings* that we have in loadstats() to savestats(), and in
loadsettings() to savesettings().
Fixes#556. Depends on #558.
Another step to fix the bug #556 is to allow Game::savestats() to accept
a pointer to an existing ScreenSettings struct. This entails refactoring
Game::savesettings() and Game::serializesettings() to accept the
function as well, along with adding Screen::GetSettings() so the
settings of the current Screen can be easily grabbed.
In order to be able to fix the bug #556, I'm planning on adding
ScreenSettings* to the settings.vvv write function. However, that
entails adding another argument to Game::savesettings(), which is going
to be really messy given the default argument of Game::savestats().
That, combined with the fact that the code comment at the site of the
implementation of Game::savestats() being wrong (!!!), leads me to
believe that using default function arguments here isn't worth it.
Instead, what I've done is made it so callers are explicit about whether
or not they're calling savestats(), savesettings(), or both at the same
time. If they are calling both at the same time, then they will be using
a new function named savestatsandsettings().
In short, these are the interface changes:
* bool Game::savestats(bool) has been removed
* bool Game::savestatsandsettings() has been added
* void Game::savestats_menu() has been renamed to
void Game::savestatsandsettings_menu()
* All previous callers of bool Game::savestats() are now using bool
Game::savestatsandsettings()
* The one caller of bool Game::savestats(bool) is now using bool
Game::savestats()
While there already exists an option to skip the fake loading screen
entirely (without requiring an ACTION press), there are several reasons
for including this option as well:
* So people upgrading from 2.2 won't have to sit through the fake
loading screen the first time they open 2.3.
* So if people are too lazy to use the existing option, they can use
this one instead.
* So tool-assisted speedruns (TASes) of this game can skip the fake
loading screen without requiring an existing settings.vvv beforehand.
This last one is the biggest reason for me, since I'm not sure what
TASVideos.org rules are regarding existing save files, but with this
change nobody has to worry about their rules and can safely just
press ACTION to skip the fake loading screen automatically.
`success = success && savesettings();` is now changed to
`success &= savesettings();`. It's bitwise, and I think C++ should have
had a &&= for completeness, but it shouldn't matter here.
Changing settings would most of the time attempt to save unlock.vvv and
now also settings.vvv, but there would be no feedback whether the files
have been saved successfully or not. Now, if saving fails when changing
settings in the menu, a warning message will be shown. The setting will
still be applied of course, but the user will be informed it couldn't
be saved. This message can be silenced until the game is restarted,
because I can imagine this could get very annoying when someone already
knows their settings aren't writeable.
Also, some options didn't even save settings in the first place. These
are turning off invincibility, and by coincidence precisely all the
options in the advanced options menu. I made sure these options now do
so.
As part of fixing #464, I'll need to move these pieces of code around
easily. In #220 I just kind of shoved them awkwardly in whatever
fixed function would be last called in the gamestate loop, which I
shouldn't have done as I've now had to make formal fixed-render
functions anyway. Because these fixed functions need to be called
directly before a render function, and I'm fixing the order to put
render functions in their proper place, so I need to be able to move
these around easily, and making them function calls instead of inlined
makes them easier to manipulate.
Today, I saw a video posted by Chelito on the VVVVVV speedrunning
Discord where he died inside a gravitron square over and over after the
Gravitron in Intermission 2 ended.
https://cdn.discordapp.com/attachments/234787368522088448/779074864660480020/What.mp4
This is caused by the fact that after the Gravitron ends, the game no
longer considers you to be inside swnmode, so it won't move the enemies
offscreen when you die.
To fix this, after the Gravitron ends, the game will switch to swngame
8, where it will keep you inside swnmode until all gravitron squares are
offscreen. This means that gravitron squares that are onscreen after the
Gravitron ends will be moved offscreen if you die, preventing the above
death loop from happening.
PR #468 made it so you can use the menus while in a cutscene, in order
to counteract softlocks. However, this has resulted in more
unintentional behavior:
- `gamemode(teleporter)` breaks when opening the ENTER menu (Misa
mentioned this)
- The player can now interrupt shakes and walks, and have their timers
run out before resuming the cutscene
- After completing the game, the player can warp to the ship while a
dialogue is active, and prevent themselves from advancing text (plus
it's always rude to just teleport away while someone's talking)
- The player can peek at the map before hidecoordinates is run, and can
also peek at what the game does with missing/rescued crewmates during
cutscenes
This commit fixes the latter two issues. While a script is running,
only the SAVE tab is now available. Therefore the player can still get
themselves out of softlocks as intended, but they do things like
looking at the map or teleporting away during a cutscene.
It wasn't a direct duplicate of key.sensitivity, but it was still
basically the same thing. Although to be fair, at least the case-switch
conversion didn't get duplicated everywhere unlike game.slowdown.
So now key.sensitivity functions the same as game.controllerSensitivity,
and it only gets converted to its actual value whenever a joystick input
happens in key.Poll(), unlike previously where it got converted every
single frame on the title screen (there was even a comment that said
"TODO bit wasteful doing this every poll").
game.gameframerate seems to exist for converting the value of
game.slowdown into an actual timestep value, when really the timestep
value should just use game.slowdown directly with a fast lookup table.
Otherwise, there's a bunch of duplicated game.slowdown case-switches
everywhere, which adds up to a large, annoying pile should the values be
changed in the future. But now the duplicate variable has been removed,
and with it, all the copy-pasted case-switches.
Also, the game speed text rendering in Menu::accessibility and
Menu::setslowdown has been factored out to a function and de-duplicated
as well.
There were some duplicate Screen configuration variables that were on
Game, when there didn't need to be.
- game.fullScreenEffect_badSignal is a duplicate of
graphics.screenbuffer->badSignalEffect
- game.fullscreen is a duplicate of !graphics.screenbuffer->isWindowed
- game.stretchMode is a duplicate of graphics.screenbuffer->stretchMode
- game.useLinearFilter is a duplicate of
graphics.screenbuffer->isFiltered
These duplicate variables have been removed now.
I put indentation when handling the ScreenSettings struct in main() so
the local doesn't live for the entirety of main() (which is the entirety
of the program).
Apparently, the amount of digits in a commit hash that git will output
varies depending on how many objects are in the repository that the hash
gets pulled from. The more objects, the more digits needed to avoid a
hash collision.
Sources:
https://stackoverflow.com/q/18134627/#comment26560283_18134919https://stackoverflow.com/a/21015031/
So that means we'll have to dynamically account for the length of the
commit hash in order to get it properly right-aligned with the rest of
the text.
There are probably going to be situations where we'll want to compile in
release mode, but still want the hash and don't want Steam/GOG enabled.
So Ethan can use OFFICIAL_BUILD when tagging major versions of the game.
For some reason, music.usingmmmmmm automatically gets set to true in
musicclass::init(). I assume this was because it would get re-assigned
by game.usingmmmmmm in the game startup code anyway, but now that
musicclass::init() can be called more than once, this variable will just
get set to true when it shouldn't be, causing a confusing desync just
like the one I described in my previous commit, where you would have
PPPPPP or MMMMMM on the title screen, but closing the game and
re-launching it would play the other soundtrack instead.
Again, these duplicate variables should be removed, but that's going to
be a separate patch. In the meantime, I'm removing this variable
assignment.
musicclass::init() re-initializes every attribute of musicclass
unnecessarily, when initialization should be put in a constructor
instead. This is bad, because music.init() gets called whenever we enter
and exit a custom level that has assets.
Otherwise, this would result in a bug where music.usingmmmmmm would be
reset, causing you to revert to PPPPPP on the title screen whenever you
enter a level with MMMMMM selected and exit it.
This also causes a confusing desync between game.usingmmmmmm and
music.usingmmmmmm since the values of the two variables are now
different (these duplicate variables should probably be removed, too,
and a lot of other duplicate variables like these exist, too, which are
a real headache). Which means despite MMMMMM playing on the title
screen, exiting the game and re-launching it will play PPPPPP instead.
What's even more is that going to game options and switching to PPPPPP
will play PPPPPP, but afterwards launching and re-entering will play
MMMMMM. Again, having duplicate variables is very bad, and should
probably be fixed, but that's a separate patch.
...you die and the platform's x-coordinate is to the left of x=152.
Which means if you die and the platform isn't completely clear of the
space of its adjacent disappearing platform.
The block needs to be updated accordingly with calls to
obj.nocollisionat() and obj.moveblockto(), else the block will simply be
left behind and the platform will no longer have any collision. This is
in contrast to 2.2 behavior, where the platform would simply
unconditionally create a new block, which would actually end up with a
duplicate block since the previous block didn't get cleaned up, but this
didn't cause any problems because the room was carefully designed so you
would never be able to touch that previous block after you died and
respawned at the checkpoint. But it's still there.
I also added comments to document what this kludge code did, because
otherwise it would be mysterious to readers who are unfamiliar with it.
Fixes#543.
What's the difference between a slash sign and a percent sign? Well, a
percent sign is just a slash sign with two extra oranges in between, but
those two oranges make a huuuuge difference...
I can't really make the filter update only every timestep, because it's
per-pixel and operates on deltaframes too, so it TECHNICALLY runs faster
in over-30-FPS mode than not. That said, it's not really noticeable, the
filter doesn't look bad for updating more often or anything. However, I
can at least interpolate the scrolling, so it's smooth in over-30-FPS
mode.
Originally this function was made because it needed to be exported to
gameinput(), but this piece of code is actually also used in
gamecompletelogic(). So it's good to de-duplicate it here, too.
Assigning these variables is now wholly unnecessary ever since #522 got
merged, and in fact setting graphics.backgrounddrawn to false actually
causes the warp background to "skip" when the map screen gets closed. So
this fixes that bug, too.
This kludge variable was used to re-set the warp background after coming
back from the in-game settings menus. But since #522 got merged, this
has no longer been necessary.
This check is clearly meant for destroying the factory clouds in the
room "Level Complete!" in the main game, but it covers all rooms on row
8, instead of only (13,8). Adding an x-room check restricts this
behavior to only (13,8).
Trinket9 reported that this weird behavior of destroying specifically
above y-position 60 was undesirable, since they were creating an enemy
with this `behave` in a room on row 8 and it kept disappearing
instantly.
First, the variable has been inverted, because it's bad practice to have
booleans with negative names. Secondly, instead of magically setting a
signaling variable when calling fadeout(), fadeout() now has a parameter
to set the quick_fade attribute, which is much cleaner than doing the
magical assignment that could potentially look unrelated.
fadeoutqueuesong basically does the same thing as nicechange - they both
queue a song to be played when the current track is done fading out.
Except, for some reason, I decided to add fadeoutqueuesong instead of
using the existing nicechange/nicefade system.
This has consequences where fadeoutqueuesong would step on the toes of
nicechange. In the case of #390, nicechange would say "let's play
Potential for Anything" when entering the Super Gravitron, but
fadeoutqueuesong had previously said "let's play Pipe Dream" because of
the player having just exited the Super Gravitron. fadeoutqueuesong took
priority because it came first in musicclass::processfade(), and when it
called play(), the Mix_PlayingMusic() in the nicechange check afterwards
would say music would already be playing at that point, so the
nicechange wouldn't take effect.
In the end, the solution is to just merge the new system into the
already-existing system.
Fixes#390.
Just looked over this and had to do a double-take. It should be
num_mmmmmm_tracks, not num_pppppp_tracks, because MMMMMM comes first in
the vector of music tracks.
Here's what causes #401: After the fade to menu delay ticks down to 0,
the game calls game.quittomenu(), but the rest of mapinput() still
executes. This means that the block that detects your ACTION press gets
executed, because there's a check that fadetomenudelay is less than or
equal to 0, and, well, it is.
So if you've pressed ACTION on the exact frame that it counts down to 0,
then the game detects your ACTION press, then processes it accordingly,
and then sets the fadetomenudelay, which means it'll get reactivated the
next time you open the map screen. But at this point, you get sent to
TITLEMODE, because game.quittomenu() set game.gamestate accordingly.
(This is why resetting game.fadetomenu or game.fadetomenudelay in
game.quittomenu() or script.hardreset() won't fix this bug.)
The solution here is to add a game.fadetomenu check to the ACTION press
processing.
Same-frame state transition logic is hard... actually, any sort of thing
where two things happen on the same frame is really annoying.
This also applies to fadetolab and fadetolabdelay, too.
Fixes#401.
The game previously did this dumb thing where it lumped in all its
settings with its file that tracked your records and unlocks,
`unlock.vvv`. It wasn't really an issue, until 2.3 came along and added
a few settings, suddenly making a problem where 2.3 settings would be
reset by chance if you decided to touch 2.2.
The solution to this is to move all settings to a new file,
`settings.vvv`. However, for compatibility with 2.2, settings will still
be written to `unlock.vvv`.
The game will prioritize reading from `settings.vvv` instead of
`unlock.vvv`, so if there's a setting that's missing from `unlock.vvv`,
no worries there. But if `settings.vvv` is missing, then it'll read
settings from `unlock.vvv`. As well, if `unlock.vvv` is missing, then
`settings.vvv` will be read from instead (I explicitly tested for this,
and found that I had to write special code to handle this case,
otherwise the game would overwrite the existing `settings.vvv` before
reading from it; kids, make sure to always test your code!).
Closes#373 fully.
This fixes a deltaframe glitch where the "- Press ENTER to Teleport -"
prompt would show up for a split second if you exited the game while the
prompt was fully faded in, and then re-entered it.
cppcheck said: "Logical disjunction always evaluates to true".
Yes. Yes it does. Whoops. I learned how to specify ranges like this in
high school math and still screw it up...
In C++, when you have two variables in different scopes with the same
name, the inner scope wins. Except you have to be really careful because
sometimes they're not (#507). So it's better to just always have unique
variable names and make sure to never clash a name with a variable in an
outer scope - after all, the C++ compiler and standard might be fine
with it, but that doesn't mean humans can't make mistakes reading or
writing it.
Usually I just renamed the inner variables, but for tx/ty in editor.cpp,
I just got rid of the ridiculous overcomplicated modulo calculations and
replaced them with actual simple modulo calculations, because the
existing ones were just ridiculous. Actually, somebody ought to find
every instance of the overcomplicated modulos and replace them with the
actual good ones, because it's really stupid, quite frankly...
Whenever you delete all your save data, your settings aren't changed at
all, and you could resave them if you fiddled with a setting somewhere.
But the full game doesn't count Flip Mode as a setting, instead it
counts it as an unlock. This means deleting your save data would unset
Flip Mode in M&P, which would seem weird because in M&P it's just a
simple setting.
For consistency, Flip Mode shouldn't be unset when deleting save data in
M&P.
This commit fixes a bug that also sometimes occurred in 2.2, where the
teleporter sprite would randomly turn into a solid color and just be a
solid circle with no detail.
Why did this happen? The short answer is an incorrect lower bound when
clamping the teleporter sprite index in `Graphics::drawtele()`. The long
answer is bad RNG with the teleporter animation code. This commit fixes
the short answer, because I do not want to mess with the long answer.
So, here is what would happen: the teleporter's `tile` would be 6. The
teleporter code decrements its `framedelay` each frame. Then when it
reached a `framedelay` of 0, it would call `fRandom()` and essentially
ask for a random number between 0 and 6. If the RNG ended up being
greater than or equal to 4, then it would set its `walkingframe` to -5.
At the end of the routine, the teleporter's `drawframe` ends up being
its `tile` plus its `walkingframe`. So having a `walkingframe` of -5
here is fine, because its `tile` is 6.
Until it isn't. When its `tile` becomes 2, it still keeps its
`walkingframe` around. The code that runs when its `tile` is 2 does have
the possibility of completely resetting its `walkingframe` to be in
bounds (in bounds after its `tile` is added), but that only runs when
its `framedelay` is 0, and in the meantime it'll just use the previous
`walkingframe`.
So you could have a `walkingframe` of -5, plus a `tile` of 2, which
produces a `drawframe` of -3. Then `Graphics::drawtele()` will clamp
that to 0, which just means it'll draw the teleporter backing, and the
teleporter backing is a simple solid color, so the teleporter will end
up being completely and fully solid.
To fix this, I just made `Graphics::drawtele()` clamp to 1 on the lower
bound, instead of 0. So if it ever gets passed a negative teleporter
index, it'll just draw the normal teleporter sprite instead, which is
better.
This fixes the draw order by drawing all other entities first, before
then drawing all humanoids[1] after, including the player afterwards.
This is actually a regression fix from #191. When I was testing this, I
was thinking about where get a crewmate in front of another entity in
the main game, other than the checkpoints in Intermission 1. And then I
thought about the teleporters, because I remember the pre-Deep Space
cutscene in Dimension Open looking funny because Vita ended up being
behind the teleporter. (Actually, a lot of the cutscenes of Dimension
Open look funny because of crewmates standing behind terminals.)
So then I tried to get crewmates in front of teleporters. It actually
turns out that you can't do it for most of them... except for Verdigris.
And then that's what I realized why there was an oddity in WarpClass.cpp
when I was removing the `active` system from the game - for some reason,
the game put a hole in `obj.entities` between the teleporter and the
player when loading the room Murdering Twinmaker. In a violation of
Chesterton's Fence (the principle that you should understand something
before removing it), I shrugged it off and decided "there's no way to
support having holes with my new system, and having holes is probably
bad anyway, so I'm going to remove this and move on". The fact that
there wasn't any comments clarifying the mysterious code didn't help
(but, this *was* 2.2 code after all; have you *seen* 2.2 code?!).
And it turns out that this maneuver was done so Verdigris would fill
that hole when he got created, and Verdigris being first before the
teleporter would mean he would be drawn in front of the teleporter,
instead of being behind it. So ever since
b1b1474b7b got merged, there has actually
been a regression from 2.2 where Verdigris got drawn behind the
teleporter in Murdering Twinmaker, instead of properly being in front of
it like in 2.2 and previous.
This patch fixes that regression, but it actually properly fixes it
instead of hacking around with the `active` system.
Closes#426.
[1]: I'm going to go on a rant here, so hear me out. It's not explicitly
stated that the characters in VVVVVV are human. So, given this
information, what do we call them? Well, the VVVVVV community (at least
the custom levels one, I don't think the speedrunning community does
this or is preoccupied with lore in the first place) decided to call
them "villis", because of the roomname "The Villi People" - which is
only one blunder in a series of awful headcanons based off of the
assumption that the intent of Bennett Foddy (who named the roomnames)
was to decree some sort of lore to the game. Another one being
"Verdigris can't flip" because of "Green Dudes Can't Flip". Then an OC
(original character) got named based off of "The Voon Show" too. And so
on and so forth.
"Humanoid" is just a word for "crewmate or player" but without having to
say "crewmate or player". This is just to make it so humanoids get drawn
after all other entities get drawn, meaning humanoids will be drawn on
top.
I'm going to refactor drawing an entity out to a separate function, and
since I'm going to do that, I might as well make some things const to
clarify intent first and foremost and possibly improve performance or
compiler optimization.
My previous custom level forwards compatibility would only work if you
saved to the same filename as you read from. But what if you saved to a
new filename? Well, your extra XML is lost.
Not to worry, I've introduced a variable that remembers the filepath of
the currently-loaded level (the existing `filename` attribute is kind of
weird and not really suited for this purpose, so). I tried to make it a
simple `const char*`, but it turns out that's bad when you take the
`c_str()` of an `std::string` that then gets destroyed, so it's best to
use `std::string` in an `std::string` world.
So now when you save a level, it'll attempt to open the original file,
and if that doesn't exist then your extra XML gets lost anyway, but I
shouldn't be expected to keep your XML if you delete the original file.
Custom level files now have forwards compatibility - except that some
XML objects will simply discard contents and attributes they don't see
fit. For instance, edentities and level properties will not preserve
newer attributes or contents.
This is because preserving them would require having to track the XML
object as part of the edentity internally, because the edentity might
change places or even be deleted throughout the course of editing
someone's level.
I opted to not add support for preserving objects like these, because
frankly, the put-everything-in-one-file level format was and still is a
terrible idea, and we should probably switch to a new format in the
future that isn't single-file. So when that happens, there won't be a
need to preserve XML attributes on edentities.
When I encountered this function, I asked myself, why make a dedicated
function instead of casting to int?
Well, as it turns out, you can't just cast to int, because you have to
convert it to a string by doing help.String(number).c_str(), like all
the other ints. So it's actually more wasteful to do it the normal way
instead of using BoolToString().
That is, until my recent changes came along and made it so that you can
just provide an int and it'll automatically be converted to a string, no
questions asked. Now, it's more optimal to do a straight cast to int
instead of having to go through a middleman function. So this function
is getting axed in favor of casting to int instead.
This file is probably the biggest one, as there will be more settings
added in the future and we don't want people's settings to be erased. Of
course, this file will be migrated to a settings.vvv sometime later in
2.3 in order to prevent 2.2 from erasing 2.3 settings.
These XML functions will be useful for de-duplicating copy-pasted XML
handling code, while also making it so elements will get updated in
place instead of being thrown out and starting from scratch every time a
file is saved.
Now that tower, title, and horizontal/veritcal warp backgrounds all use
separate buffers, there's no longer any need to temporarily store
variables as a workaround for the buffers stepping on each other.
Instead of using the same tower buffer that gets used for towers, use a
separate buffer instead so there's no risk of stepping on the tower
buffer's toes at the wrong point in time.
This commit combined with the previous one fixes#369.
With the previous commit in place, we can now simply move some usages of
the previous towerbg to use a separate object instead. That way, we
don't have to mess with a monolithic state, or some better way to phrase
what I just said, and we instead have two separate objects that can
coexist side-by-side.
Previously, the tower background was controlled by a disparate set of
attributes on Graphics and mapclass, and wasn't really encapsulated. (If
that's what that word means, I don't particularly care about
object-oriented lingo.) But now, all relevant things that a tower
background has has been put into a TowerBG struct, so it will be easy to
make multiple copies without having to duplicate the code that handles
it.
Yet another set of temporary variables is on a global class when they
shouldn't be. These two are only used in tower background functions and
are never used anywhere else, so they're clearly temporaries.
For some reason, this `tl` is a `point`? But the only other time the
name `tl` is used elsewhere in the code is a float on a `textboxclass`.
Regardless, this is unused.
This function was only used in assigments to mapclass::towercol. But
that variable is unused, and has been removed, so after removing that
variable, this one is unused, too.
On the deltaframes of the tower background, there would be "pixel bleed"
if the tower background would be scrolling from the top. This is because
there wouldn't be any more pixels from above the screen to grab, because
the background rendering functions didn't draw any pixels above the
screen. But they couldn't draw any pixels above the screen, because that
was simply the end of the buffer. But now that the buffer is expanded,
we can now draw above the screen, and fix this glitchy interpolation
rendering.
In order to fix the weird title screen pixels at the top on deltaframes,
we'll need to have a bit more space at the top. Also to the left, in
case we need a background to scroll from the left in the future.
These commands now use the INBOUNDS_ARR() macro to convey intent, and to
make sure that if the size of the array changes in the future, that the
bounds check wouldn't end up being wrong. Also fixed some code style for
the flag() and ifcrewlost() commands.
Scripting crewmates apparently have a specific hardcoded rule in their
follow-player code that makes it so if they're in (10,5) and are to the
left of the line x=155, they will refuse to continue following the
player. This was clearly done to make it so Vitellary in the main game
wouldn't overlap the teleporter, and that was clearly done to make it so
it wouldn't look like he would go behind the teleporter, which would
look weird (I also noticed this in #513).
I stumbled across this code and thought that just like other weird
main-game code that shouldn't apply in custom levels (#136, #137, #144),
this should be fixed, too.
The window icon is simply another asset that can be customized by level
makers. And in fact, one of my levels changes the window icon. It's
simply named VVVVVV.png, but it doesn't sit in the graphics folder,
rather it sits in the root VVVVVV directory.
I noticed that this asset was missed when per-level assets loading was
added, so I decided to add it in.
There's a NULL check on screenbuffer because reloadresources() gets
called before screenbuffer's init() does.
The intent of #504 was to make it so oldxp/oldyp would never be messed
with for over-30-FPS stuff, but I forgot that I changed these
assignments in my over-30-FPS patch when I was doing #504. So these
assignments have been restored to the way they were in 2.2, and is
fixed now.
While my previous commit fixes the glitchy y-position when you get stuck
inside a conveyor, I noticed that getting inside a conveyor seems to
always push the player out, despite conveyors sharing the same code with
moving platforms, which has code to temporarily disable their own
collision when the player gets stuck inside them, so that the player
DOESN'T get pushed out.
Well, it turns out that the reason this happens is because conveyors in
a room that get placed during mapclass::loadlevel() get tile 1 placed
underneath them. This is mostly so moving platforms will collide with
them, because otherwise platforms don't collide with other platforms,
and a conveyor is considered a platform.
This means that a conveyor without any tiles behind it will simply get
the player stuck if they get inside it, and the player won't be pushed
out. This is bad, because conveyors don't move, so they'll be stuck
there forever until they press R (or save, quit, and load). This
situation doesn't come up in the main game, but it COULD come up in
custom levels that use the internal createentity() command to create
conveyors that don't have any tiles behind them.
It seems good to fix this as well, while we're at it fixing conveyor
physics, so I'm fixing this as well.
There is this issue with conveyors where if you collide with them, your
intended next y-position doesn't get updated to the position of the
conveyor, and then your y-position gets set to your intended next
y-position. This also applies to horizontally moving platforms.
This bug used to not produce any problems, if at all, until #502 got
merged. Since then, respawning from checkpoints that are on conveyors
would sometimes not update your y-position at all, making it possible to
get stuck inside a death loop that would require you to exit the game
and re-enter it.
But you can always reliably create this bug simply by going into the
editor and placing down a conveyor and checkpoint on top of each other.
Then enter and exit playtesting a bunch of times, and you'll notice the
glitchy y-position Viridian keeps taking on.
The root cause of this is how the game moves the player whenever they
stand on the top or bottom of a conveyor (or a horizontally moving
platform). The game sets their intended next x-position (newxp), then
calls obj.entitymapcollision() on them. This would be okay, except their
intended next y-position (newyp) doesn't get set along with their newxp,
so entitymapcollision() will use the wrong newyp, then find that there
is nothing that will collide with the player at that given newyp, then
update the yp of the player to the wrong newyp.
So, the platform logic simply doesn't set the player's newyp. Why does
the player have the wrong newyp? It's because moving platforms (and
conveyors) are updated first before all other entities are, and this
includes the code that checks the player for collisions with moving
platforms. That's right: the moving platform collision code gets ran
before the player properly gets updated. This means that the game will
use the newyp of the previous frame, which could be anything, really,
but it most likely just means the intended next y-position of the player
gets canceled, leaving the player with the same y-position they had
before.
Okay, but this bug only seems to happen when you put a checkpoint inside
a conveyor (or a moving platform that hasn't started moving yet) and
start playtesting from it, so why doesn't this bug happen more often,
then? Well, it's probably because of luck and coincidence. Most of the
time, if you're colliding with a conveyor or horizontally moving
platform, you probably have a correct newyp from the previous frame of
the game, so there'd be no problems. And before #502 got merged, this
previous frame would be provided by the player having to fall to the
surface due to the y-offset of their savepoint. However, if you make it
so that you immediately teleport on to a conveyor (because you died),
then this bug will rear its ugly head.
I got this warning during compilation because there were two nested for
loops both defining i. Better to have different names to make sure some
compilers won't overwrite the outer variable with the inner one.
I was investigating a desync in my Nova TAS, and it turns out that
the gravity line collision functions check for the `oldxp` and `oldyp`
of the player, i.e. their position on the previous frame, along with
their position on the current frame. So, if the player either collided
with the gravity line last frame or this frame, then the player collided
with the gravity line this frame.
Except, that's not actually true. It turns out that `oldxp` and `oldyp`
don't necessarily always correspond to the `xp` and `yp` of the player
on the previous frame. It turns out that your `oldyp` will be updated if
you stand on a vertically moving platform, before the gravity line
collision function gets ran. So, if you were colliding with a gravity
line on the previous frame, but you got moved out of there by a
vertically moving platform, then you just don't collide with the gravity
line at all.
However, this behavior changed in 2.3 after my over-30-FPS patch got
merged (#220). That patch took advantage of the existing `oldxp` and
`oldyp` entity attributes, and uses them to interpolate their positions
during rendering to make everything look real smooth.
Previously, `oldxp` and `oldyp` would both be updated in
`entityclass::updateentitylogic()`. However, I moved it in that patch to
update right before `gameinput()` in `main.cpp`.
As a result, `oldyp` no longer gets updated whenever the player stands
on a vertically moving platform. This ends up desyncing my TAS.
As expected, updating `oldyp` in `entityclass::movingplatformfix()` (the
function responsible for moving the player whenever they stand on a
vertically moving platform) makes it so that my TAS syncs, but the
visuals are glitchy when standing on a vertically moving platform. And
as much as I'd like to get rid of gravity lines checking for whether
you've collided with them on the previous frame, doing that desyncs my
TAS, too.
In the end, it seems like I should just leave `oldxp` and `oldyp` alone,
and switch to using dedicated variables that are never used in the
physics of the game. So I'm introducing `lerpoldxp` and `lerpoldyp`, and
replacing all instances of using `oldxp` and `oldyp` that my over-30-FPS
patch added, with `lerpoldxp` and `lerpoldyp` instead.
After doing this, and applying #503 as well, my Nova TAS syncs after
some minor but acceptable fixes with Viridian's walkingframe.
This commit restores the evaluation order of moving platforms and conveyors to
be what it was in 2.2. The evaluation order changed in 2.3 after the patchset
to improve the handling of the `obj.entities` and `obj.blocks` vectors (#191).
By evaluation order, I'm talking about the order in which platforms and
conveyors will be evaluated (and thus will take priority) if Viridian stands
on both a conveyor or platform at once, and they either have different speeds
or are pointing in different directions. Nowhere in the main game is there a
place where you can stand on two different conveyors/platforms at once, so
this is solely within the territory of custom levels, which is my specialty.
So what caused this evaluation order to change? Well, every moving platform
and conveyor in the game is actually made up of two objects: an entity, and a
block. The entity is the part that moves around, and the block is the part
that actually has the collision.
But if the entity is the part that moves around, and entities and blocks are
in entirely separate vectors, how is the block part going to move along with
it? Well, maybe you'd guess some sort of unique ID system, but spend some time
digging around the code and you won't find any trace of any (there's no
attribute on an entity to store such an ID, for starters).
Instead, what the game does is actually remove all blocks that coincide with
the exact top-left corner of the entity, and then create a new one. Destroying
and creating blocks like this all the time is hugely wasteful, but hey, it
worked.
So why did the evaluation order change in 2.3? Well, to understand that,
you'll need to understand 2.2's `active` system. Instead of having an object
be real simply by virtue of it existing, 2.2 had this system where the object
was only real if it had its `active` attribute set to true. In other words,
you would be looking at a fake object that didn't actually exist if its
`active` attribute was false.
On the surface, this doesn't seem that bad. But this can lead to "holes" in a
given vector of objects. A hole is simply an inactive object neighbored by
active objects (or the inactive object could be the first one in the vector,
but then have an active object immediately following it).
If you have a vector of 3 objects, all of them active, then removing the
second one will result in the vector containing an active object, followed by
an inactive object, followed by an active one. However, since the switch to
more properly use vectors instead of relying on this `active` system, there's
no longer any way for holes to exist in a vector. Properly removing an object
from a vector will just shift the rest of the objects down, so if we remove
the second object after the vector fix, then this will simply move the third
object into the slot of where the second object used to be.
So, what happens if you destroy a block and then create a new one in the
`active` system? Let's say that your `obj.blocks` looks like this, and here
I'm denoting each block by writing out its coordinates:
[30,60] [70,90] [80,100]
and that you want to update the position of the second one, because the entity
that that blocks belongs to has been updated. Okay, so, you delete that block,
which then makes things look like this:
[30,60] [-] [80,100]
and then afterwards, you create a new block with the updated position,
resulting in this:
[30,60] [74,90] [80,100]
Since `entityclass::createblock()` will find the first block slot that has a
false `active` attribute, it puts the new object in the same slot as the old
one. What has been essentially done here is that the slot of the block has
basically been reserved for the new block with the new position. Here, the
evaluation order of each block will stay the same.
But then 2.3 comes along and changes things up. So we start with an
`obj.blocks` like this again:
[30,60] [70,90] [80,100]
and we want to update the second block, like before. So we remove the second
block, resulting in this:
[30,60] [80,100]
It should be obvious that unlike before, where the third block stayed in the
third slot, the third block has now been moved to the second slot. But
continuing on; we are now going to create the new block with its updated
position, resulting in this:
[30,60] [80,100] [70,90]
At this point, we can see that the evaluation order of these blocks has been
changed due to the fact that the third block has now been moved to the slot
that was previously the slot of the second block.
So what can we do about this? Well, we can basically emulate what VVVVVV did
in 2.2, which is disable a block without actually removing it - except I'm not
going to reintroduce an `active` attribute or anything. I'll disable the
collision of all blocks at a certain position by setting their widths and
heights to 0, and then re-enable them later by finding the first block at that
same position, updating its position, and re-assigning its width and height
again.
The former is what `entityclass::nocollisionat()` does; the latter is what
`entityclass::moveblockto()` does. The former mimicks turning off the `active`
attribute of all blocks sharing a certain top-left corner; the latter mimicks
creating a new block - and it will only do this for one block, because
`entityclass::createblock()` in 2.2 only looked for the first block with a
false `active` attribute.
Now, some quirks relied on the previous behavior of destroying and creating
blocks, but all of these quirks have been preserved with the way I implemented
this fix.
The first quirk is that platforms passing through 0,0 will destroy all spike
hitboxes, script boxes, activity zones, and one-way hitboxes in the room. The
hitboxes of moving platforms, disappearing platforms, 1x1 quicksand, and
conveyors will not be affected.
This is a consequence of the fact that the former group uses the `x` and `y`
of their `rect`, while the latter group uses the `xp` and `yp` attributes. So
the `xp` and `yp` of the former are both 0. Meaning, a platform passing
through 0,0 destroys them all.
Having these separate coordinates seems like an artifact from the Flash days.
(And furthermore, there's an unused `x` and `y` attribute on all blocks,
making for technically three separate sets of coordinates! This should
probably be cleaned up, except for what I'm about to say...) But actually, if
you merge both sets of coordinates into one, this lets moving platforms
destroy script boxes and activity zones if it passes through the top-left
corner of them, which is probably far worse than the destruction being
localized to a specific coordinate that would never likely be reached
normally.
This quirk is preserved just fine without any special-casing, because instead
of destroying all blocks at 0,0, they just get disabled, which does the same
job. This quirk seems trivial to fix if I made it so that the position of a
platform's block was updated instantaneously instead of having one step to
disable it and another step to re-enable it, but I aim to preserve as much
quirks as possible.
The second quirk is that a moving platform passing through the top-left corner
of a disappearing platform or 1x1 quicksand will destroy the block of that
disappearing platform. This is because, again, when a moving platform updates,
it destroys all blocks at its previous position, not just only one block. This
is automatically preserved because this commit just disables the block of the
disappearing platform instead of removing it. Just like the last one, this
quirk seems extremely trivial to fix, and this time by simply making it so
`entityclass::nocollisionat()` would have a `break` statement, i.e. only
disabling the first block it finds instead of all blocks it finds, but I want
to keep all quirks that are possible to keep.
The last quirk is that, apparently, in order to prevent pushing the player
vertically out of a moving platform if they get inside of one, the game
destroys the block of the moving platform. If I had missed this edge case,
then the block would've been destroyed, leaving the moving platform with no
collision. But I caught it in my testing, so the block gets disabled instead
of destroyed. Also, it seems obtuse for those who don't understand why a
platform's block gets destroyed or disabled whenever the player collides with
it in `entityclass::collisioncheck()`, so I've put up a comment documenting it
as well.
The different platform evaluation order desyncs my Nova TAS, but after
applying this patchset and #504, my TAS syncs fine (save for the different
walkingframe from starting immediately on the ground instead of in the air
(#502), but that's minor and can be easily fixed).
I've attached a test level to the pull request for this commit (#503) to
demonstrate that this patchset not only fixes platform evaluation order, but
preserves some bugs and quirks with the existing block system.
The first room demonstrates the fixed platform evaluation order, by stepping
on the conveyors that both point into each other. In 2.2, Viridian will move
to the right of the background pillar, but in 2.3, Viridian will move to the
left of the pillar. However, after applying this patch, Viridian will now move
to the right of the pillar once again.
The second room demonstrates that the platform-passing-through-0,0 trick still
works (as explained above).
The last room demonstrates that platforms passing through the top-left corners
of disappearing platforms or 1x1 quicksand will remove the blocks of those
entities, causing Viridian to immediately pass through them. This trick is
still preserved after my patchset is applied.
Previously, setting the actual volume of the music was all over the
place. Which isn't bad, but when I added being able to press N to mute
the music specifically, I should've made it so that there would be a
volume variable somewhere that the game looks at if the music is
unmuted, and otherwise sets the actual volume to 0 if the game is muted.
This resulted in things like #400 and #505 and having to add a bunch of
special-cased checks like game.musicmuted and game.completestop. But
instead of adding a bunch of special-case code, just make it so there's
a central place where Mix_VolumeMusic() actually gets called, and if
some piece of code wants to set the music volume, they can set
music.musicVolume. But the music handling logic in main.cpp gets the
final say on whether to listen to music.musicVolume, or to mute the game
entirely.
This is how the music handling code should have been from the start
(when pressing N to mute the music was added).
Fixes#505.
The value of the macro might not change in the future, but it's there
for a reason. That reason being to improve code readability, because
otherwise 128 would just be a magic number that plopped in out of
nowhere. Sometimes the game uses MIX_MAX_VOLUME, other times it uses
128, so to be consistent I'm just going to enforce MIX_MAX_VOLUME
entirely.
This reverts commit cf5ad166e3.
My implementation will make it so single-case patches like this commit
won't be necessary anymore (there's no need to add a special-case check
for game.musicmuted, the way that I'm gonna do it). In fact, it's better
if I just revert the commit entirely.
It seems like the start point of a custom level and all checkpoints in
the game end up putting your spawn point one pixel away from the surface
it touches, which seems like an oversight. I'm going to enforce some
consistency here and make it so that all spawn points, whenever you
start from a start point or a checkpoint, will always be correctly
positioned flush with the surface they're standing on, and not one pixel
more or less than that.
An exotic checkpoint is a checkpoint with a sprite that is neither the
flipped checkpoint nor unflipped checkpoint. More specifically, it's a
checkpoint whose edentity p1 attribute is something other than 0 or 1.
Normally, whenever you touch an exotic checkpoint in-game, your
savepoint's y-position and gravitycontrol don't get touched. However, in
the editor, spawning from an exotic checkpoint means that your
gravitycontrol gets set to a value that is neither 0 nor 1. In this
invalid gravitycontrol state, Viridian is treated like they're flipped,
but they cannot unflip.
This is an inconsistency between the editor and in-game, so I'm fixing
it. Now, spawning from an exotic checkpoint in the editor will just set
your gravitycontrol to 0, i.e. unflipped.
So, 77a636509b fixed the fact that you
only got 1 frame of onground/onroof when standing on a vertical moving
platform, but removing those lines entirely means that it takes 1 frame
before the onground/onroof of 2 actually takes effect. This desyncs my
Nova TAS, so it seems important to fix.
The onroof/onground attributes are used to determine if the player is
standing on a surface and is eligible to flip. Most notably, it is an
integer and not a boolean, and it starts at 2, giving the player 2
frames to edge-flip, i.e. they can still flip 2 frames after walking off
an edge.
However, these attributes are unnecessarily reassigned in
movingplatformfix() (which is the function that deals exclusively with
vertically-moving platforms; horizontal moving platforms get their own
hormovingplatformfix()). Whoever wrote this misunderstood what
onroof/onground meant; they thought that they were booleans, and so set
them to true, instead of the proper value of 2. This ends up setting
onroof/onground to 1 instead of 2, causing a discrepancy with vertical
moving platforms and the rest of the surfaces in the game.
The bigger mistake here is duplicating code that never needed to be
duplicated. The onroof/onground assignment in gamelogic() works
perfectly fine for vertical moving platforms. Indeed, after testing it
with libTAS, I can confirm that removing the duplicate assignments
restores being able to edge-flip off of moving platforms with 2 frames
of leeway, instead of only 1 frame. It also doesn't change how long it
takes for the onroof/onground to get set when the player is recognized
as standing on a vertically-moving platform, either.
And so, it's better to not duplicate this code, because when you
duplicate it you run the risk of making a mistake, as I just
demonstrated.
By "unnecessary qualifiers to self", I mean something like using the
'game.' qualifier for a variable on the Game class when you're inside a
function on the Game class itself. This patch is to enforce consistency
as most of the code doesn't have these unnecessary qualifiers.
To prevent further unnecessary qualifiers to self, I made it so the
extern in each header file can be omitted by using a define. That way,
if someone writes something referring to 'game.' on a Game function,
there will be a compile error.
However, if you really need to have a reference to the global name, and
you're within the same .cpp file as the implementation of that object,
you can just do the extern at the function-level. A good example of this
is editorinput()/editorrender()/editorlogic() in editor.cpp. In my
opinion, they should probably be split off into their own separate file
because editor.cpp is getting way too big, but this will do for now.
This is a refactor that simply moves all temporary variables off of
entityclass, and makes it so they are no longer global variables. This
makes the resulting code easier to understand as it is less entangled
with global state.
These attributes were:
- colpoint1
- colpoint2
- tempx
- tempy
- tempw
- temph
- temp
- temp2
- tpx1
- tpy1
- tpx2
- tpy2
- temprect
- temprect2
- x (actually unused)
- dx
- dy
- dr
- px
- py
- linetemp
- activetrigger
- skipblocks
- skipdirblocks
Most of these attributes were assigned before any of the times they were
used, so it's easy to prove that ungloballing them won't change any
behaviors. However, dx, dy, dr, and skipblocks are a bit more tricky to
analyze. They relate to blocks, with dx, dy, and dr more specifically
relating to one-way tiles. So after some testing with the quirks of
one-way tiles, it seems that the jankiness of one-way tiles haven't
changed at all, either.
Unfortunately, the attribute k is clearly used without being assigned
beforehand, so I can't move it off of entityclass. It's the same story
with the attribute k that Graphics has, too.
This prevents users from being confused whenever they type a pipe in the
script editor, then save the level and load it again and see their
script lines unexpectedly splitting in two. Now if you attempt to type a
pipe, it simply won't happen at all.
Fixes#379.
It's possible that SDL_atoi() could call the libc atoi(), and if a
string is provided that's too large to fit into an integer, then that
would result in undefined behavior. To avoid this, use SDL_strtol()
instead.
Instead of copying to a temporary string, just use SDL_strncmp(). Also,
I checked the blame, and apparently I committed the line that used
strcmp() instead of SDL_strcmp(), for whatever reason. But that's fixed
now.
For some reason, the variable `k` is on entityclass and gets mutated in
createentity() and createblock(). Then updateentities() uses it without
checking if it's valid, because either `k` or the size of `entities`
could have changed in the meantime. To fix any potential undefined
behavior, these bounds checks should be added.
This fixes a bug where font_positions wouldn't get cleared after exiting
a custom level that had a font.txt if it didn't exist in the default
graphics, leading to messed-up-looking font rendering.
This bug was originally discovered by Ally.
You're intended to rescue Violet first, and not second, third, or
fourth, and especially not last.
If you rescue her second, third, or fourth, your crewmate progress will
be reset, but you won't be able to re-rescue them again. This is because
Vitellary, Verdigris, Victoria, and Vermilion will be temporarily marked
as rescued during the `bigopenworld` cutscene, so duplicate versions of
them don't spawn during the cutscene, and then will be marked as missing
later to undo it.
This first issue can be trivially fixed by simply toggling flags to
prevent duplicates of them from spawning during the cutscene instead of
fiddling with their rescue statuses.
However, there is still another issue. If you rescue Violet last, then
you won't be warped to the Final Level, meaning you can't properly
complete the game. This can be fixed by adding a `crewrescued() == 6`
check to the Space Station 1 Level Complete cutscene. There is
additionally a temporary unrescuing of Violet so she doesn't get
duplicated during the `bigopenworld` cutscene, and I've had to move that
to the start of the `bigopenworld` and `bigopenworldskip` scripts,
otherwise the `crewrescued() == 6` check won't work properly.
I haven't added hooks for Intermission 1 or 2 because you're not really
meant to play the intermissions with Violet (but you probably could
anyway, there'd just be no dialogue).
Oh, and the pre-Final Level cutscene expects the player to already be
hidden before it starts playing, but if you rescue Violet last the
player is still visible, so I've fixed that. But there still ends up
being two Violets, so I'll probably replace it with a special cutscene
later that's not so nonsensical.
I have no idea why neither conveyors and moving and disappearing
platforms rendered in the editor or in-game use
Graphics::drawentcolours(), but this needs to be bounds-checked just as
I did for the in-game rendering function.
The entity getters I'm referring to are entityclass::getscm(),
entityclass::getlineat(), entityclass::getcrewman(), and
entityclass::getcustomcrewman().
Even though the player should always exist, and the player should always
be indice 0, I wouldn't want to make that assumption. I've been wrong
before.
Also, these functions returning 0 lull you into a false sense of
security. If you assume that commands using these functions are fine,
you'll forget about the fact that `i` in those commands could be
potentially anything, given an invalid argument. In fact, it's possible
to index createactivityzone(), flipgravity(), and customposition()
out-of-bounds by setting `i` to anything! Well, WAS possible. I fixed it
so now they can't.
Furthermore, in the game.scmmoveme block in gamelogic(), obj.getplayer()
wasn't even checked, even though it's been checked in all other places.
I only caught it just now because I wanted to bounds-check all usages of
obj.getscm(), too, and that game.scmmove block also used obj.getscm()
without bounds-checking it as well.
When this is done, there is potential for a mistake to occur when
writing out the bounds check, which is eliminated when using the macro
instead. Luckily, this doesn't seem to have happened, but what's even
worse is I hardcoded 400 instead of using SDL_arraysize(ed.level), so if
the size of ed.level the bounds checks would all be wrong, which
wouldn't be good. But that's fixed now, too.
This is because if they are manually written out, they are more likely
to contain mistakes.
In fact, after further review, there are several functions with
incorrect manually-written bounds checks:
* entityclass::entitycollide()
* entityclass::removeentity()
* entityclass::removeblock()
* entityclass::copylinecross()
* entityclass::revertlinecross()
All of those functions forgot to do 'greater than or equal to' instead
of 'greater than' when comparing against the size of the vector. So they
were erroneous. But they are now fixed.
It's better to do INBOUNDS_VEC(i, obj.entities) instead of 'i > -1'.
'i > -1' is used in cases like obj.getplayer(), which COULD return a
sentinel value of -1 and so correct code will have to check that value.
However, I am now of the opinion that INBOUNDS_VEC() should be used and
isn't unnecessary.
Consider the case of the face() script command: it's not enough to check
i > -1, you should read the routine carefully. Because if you look
closely, you'll see that it's not guaranteed that 'i' will be initialized
at all in that command. Indeed, if you call face() with invalid
arguments, it won't be. And so, 'i' could be something like 215, and
that would index out-of-bounds, and that wouldn't be good. Therefore,
it's better to have the full bounds check instead of checking only one
bounds. Many commands are like this, after some searching I can also
name position(), changemood(), changetile(), changegravity(), etc.
It also makes the code more explicit. Now you don't have to wonder what
-1 means or why it's being checked, you can just read the 'INBOUNDS' and
go "oh, that checks if it's actually inbounds or not".
For some reason it called obj.getplayer() and did nothing with the
result. Weird. But it does say "Test script for space station" above.
Removing this fixes an 'unused variable' warning.
With the scope of these variables reduced, it makes analyzing this
function easier, as you can now clearly see all temporary variables are
actually initialized before they're used.
Since there's an INBOUNDS_ARR() macro, it's much better to specify the
macro for the vector is a macro for the vector, to avoid confusion.
All usages of this macro have been renamed accordingly.
Stuck prevention (pushing the player/supercrewmate out if they are
inside a wall) has been factored out into its own function, so it's no
longer copy-pasted but slightly tweaked just for the supercrewmate.
Instead of having two separate functions to move entities along vertical
moving platforms, one for the player and one for the supercrewmate, they
have been consolidated into one function.
In-level, they were made to be gray in #323. The editor does not reflect this however; they're still shown as
green. For the same reasons in #323, this adds special cases to draw the entities as gray.
Closes#372.
Also, I changed my name in contributors.txt to be my username as I didn't feel comfortable with it being my name.
Co-authored-by: Misa <ness.of.onett.earthbound@gmail.com>
The game has four different functions for the same XML schema:
Game::loadtele(), Game::savetele(), Game::loadquick(), and
Game::savequick(). This essentially means one XML schema has been
copy-pasted three different times.
I can at least trim that number down to being copy-pasted only one time
by de-duplicating the reading and writing part. So both Game::loadtele()
and Game::loadquick() now use Game::readmaingamesave(), and
Game::savetele() and Game::savequick() now use
Game::writemaingamesave().
This will make it take less work to add XML forwards compatibility
(#373).
Due to #464, standing inside a gravity line during a gotoroom that
occurs every frame will end up with the gravity line being gray instead
of being white. To temporarily fix this (until #464 is properly fixed),
I decided to add some kludge that colors it white if its onentity is 1.
I tested this patch with gravity lines in both constant-gotoroom and
normal environments, and it seems to be fine for both.
In 2.0, 2.1, and 2.2, calling flipgravity() on an entity that wasn't
rule 6 would change it to rule 7. In 2.3 currently, doing this will only
change it to rule 7 if it's already rule 6, starting with the
introduction of the change where if an entity was rule 7 it would be
changed to rule 6.
The crewmate conversion trick has been restored, but converting an
entity to a crewmate will change its rule to 6, not 7 like in pre-2.3.
If you want it to be changed to rule 7 instead of 6, you'd have to call
flipgravity() twice in 2.3 and only once in pre-2.3, which would make
maintaining compatibility between versions a bit harder.
So to fix this, I'm inverting it so that if you call flipgravity() on an
entity that isn't rule 7, it will be converted to rule 7, and only if
it's rule 7 will it be converted to rule 6.
This is a followup to b7cf6855b0 and
10ed0058fd.
In 2.2, if you had a duplicate player entity, there'd be no way to get
rid of it. Except for the recently-discovered Arbitrary Entity
Manipulation glitch, where you set `i` to the indice of the entity and
call flipgravity() on it, turning its rule to 7 and making it no longer
a player entity.
However, I patched this useful mechanic out when I made it so that you'd
no longer be able to convert entities with rule 0 to rule 6
(10ed0058fd, upheld in
b7cf6855b0), because doing so would mean
being able to softlock the game by not having any player entity.
So, in this patch, I'm making it so that you CAN convert duplicate
player entities to crewmates (and thus basically destroy them), but you
can't do that to the TRUE player entity (i.e. the first entity indice
that has rule 0, which is basically always indice 0).
This patch fixes a regression caused by commit
6b1a7ebce6.
When you spawn a crewmate with an invalid color, by doing something like
`createentity(100,100,18,-1,0)` (here the color is -1, which is
invalid), a white crewmate with the color of solid white (255, 255, 255)
would appear.
That is, until AllyTally came along and committed commit
6b1a7ebce6 (Make "[Press ENTER to
return to editor]" fade out after a bit) (PR #158). Then after that
commit, it would seem like the crewmate didn't appear, but in reality
they were just invisible, because they had an invisible color.
As part of Ally's changes, to properly support drawing text with a
certain amount of alpha, she made BlitSurfaceColoured() account for the
alpha of the color given instead of only caring about the RGB of the
color, discarding the alpha, and using the alpha of the surface it was
drawing instead. This effectively made it so the alpha of whatever it
was drawing would be 255 all the time, except for if you had custom
textures and your custom textures had translucent pixels.
However, the default color set by Graphics::setcol() if you didn't
provide a valid color index was 0xFFFFFF. Which is only (255, 255, 255)
but ends up having an alpha value of 0 (because it's actually
0x00FFFFFF). And all colors drawn with alpha 0 end up being drawn with
alpha 0 after 6b1a7ebce6. So
invalid-colored entities will end up being invisible.
To fix this, I just decided to add alpha to the default value instead.
In addition, I used getRGB() to be consistent with all the other colors
in the function.
This is a regression from 25779606b4
(PR #74).
On the one hand, I should've thought this through carefully when
implementing the fix for the lower-score overwrite bug. On the other
hand, flibit didn't seem to notice either. And on the third hand, no one
else seems to have noticed, when they have had over 8 months to do so.
Not even the person who originally reported the lower-score overwrite
bug and also reported other bugs I hadn't noticed (e.g. the "You have
rescued a crewmate!" in Flip Mode) noticed this bug, which I believe was
weee50. But to be fair, he does seem to be less active nowadays.
On the fourth hand, I only realized the cause of the duplicate bug after
stepping through it in GDB, instead of just looking at it and going "hey
wait a minute" earlier. I'm surprised it didn't take me longer to
realize the problem.
I'm not sure what all these hands mean anymore, or where I'm getting
extra hands from. Whatever. This regression is fixed now.
So, I was staring at VVVVVV code one day, as I usually do, and I noticed
that warp lines had this curious code in entityclass::updateentities()
that set their statedelay to 2, and I thought, hm, maybe the pre-2.1
warp line bypass is caused by this statedelay. And, it doesn't seem like
this is the primary code used to detect if the player collides with warp
lines, the actual code is commented with "Rewritten system for mobile
update" and bolted-on in gamelogic() instead of properly being in
entityclass::entitycollisioncheck().
So, after getting tripped up on the misleading indentation of that
"Rewritten system" block, I removed the rewritten system, re-added
collision detection for rule 7 (horizontal warp lines), and after
checking the resulting behavior, it appears to be nearly identical to
that of warp lines in 2.0.
You see, if you use warp lines to flip up from the top of the screen
onto the bottom of the screen, close to the edge of the bottom of the
screen, Viridian's head will display on the top of the screen in 2.0. In
2.1 and later, this doesn't happen, confirming that my theory is
correct. I also performed warp line bypass multiple times in 2.0 and
with my restored code, and it is pretty much the exact same behavior.
So now, the pre-2.1 warp line bypass glitch has been re-enabled in
glitchrunner mode.
This misleading indentation makes it really easy to misanalyze this
block as only containing the statements up to obj.customwarplinecheck(),
when in reality it contains everything up to the modifying of
map.warpx/map.warpy. I have made this misanalysis just now in my attempt
to figure out the pre-2.1 warp line bypass glitch, and I don't like it.
So I'm fixing this indentation now.
So there's this trick that I recently discovered, since many script
commands don't initialize `i` it's possible to use them to manipulate
arbitrary entities by specifying their indice.
This means in 2.2 you can convert entities to pseudo-crewmates by
changing their rule to 6. Except in 2.3, this was fixed when I fixed the
command to work on flipped crewmates as well. So I'm restoring this
functionality, but I recognize the protection that my previous change to
the command did in preventing levels from destroying the player entity
by changing the player's rule to something nonzero, so instead of
removing the if-conditional entirely, I'm making it so that it will only
set the rule if the entity's rule isn't 0.
For some reason, GetSubSurface() and ApplyFilter() were hardcoding the
bits-per-pixel and/or mask arguments to SDL_CreateRGBSurface(). I've
made them simply re-use the bits-per-pixel and masks of the input
surfaces they operate on, but the bits-per-pixel should always be 32 and
masks should always go first-byte alpha, second-byte red, third-byte
green, fourth-byte blue.
The game usually runs on little-endian anyways, but even if it did run
on big-endian, it doesn't check endianness everywhere so these checks
are useless. Furthermore, the code should be written so that endianness
doesn't matter in the first place.
Neither of these were used anywhere, so to simplify the code and prevent
having potentially broken code that's never shown to be broken because
it's never tested, I'm removing these.
For some reason, there's some color-clamping code in this function
directly after already-existing color-clamping code. This code dates
back to 2.2. And also, there's a smaller lower-bound of -1 for the red
channel, despite the fact that this smaller value doesn't matter because
the red would get clamped to 0 by the first code anyway.
So even if this was put here for some strange reason, it doesn't matter
because it doesn't do anything anyway.
It's trivially easy to send the scripting system into an infinite loop
on the same frame (i.e. without any script delay in between, i.e. within
the same execution of script.run()). Just take a look at these two
scripts:
a:
iftrinkets(0,b)
#
b:
iftrinkets(0,a)
#
The hashes are to prevent the scripting system from parsing iftrinkets()
using the internal version instead of the simplified version, because
after doing a simplified iftrinkets(), the parser will (to oversimplify)
execute the last line of the script as internal.
Anyway, sending the game into an infinite loop like this will cause the
Not Responding dialog on Windows.
So to prevent this from happening, I've added an execution counter to
scriptclass::run(). If it gets too high, we're in an infinite loop and
so we stop running the script.
I noticed that if I have a large amount of entities in the room, the
game starts to freeze and one frame would take a very long time. I
identified an obvious cause of this, which is that the entity collision
checking in entityclass::entitycollisioncheck() is O(n²), n being the
number of entities in the room.
But it doesn't need to be O(n²). The only entities you need to check
against all other entities are the player and the supercrewmate. You
don't need to "test entity to entity" if 99% of the pairs of entities
you're checking don't involve the player or supercrewmate.
How do we make it O(n)? Well, just hoist the rule 0 and type 14 checks
out of the inner for-loop. That way, the inner for-loop won't be
unconditionally ran, meaning that in most cases it will always be O(n).
However, if you start having large amounts of duplicate player or
supercrewmate entities (I don't know why you would), it would start
approaching O(n²), but I feel like that's fair in that case. But most of
the time, it will be O(n).
So that's how collision checking is now O(n) instead.
There's not really any good reason to prevent this action during a fade
animation. That just makes the fade timer one more potential contributor
to a softlock.
I'm leaving the fademode conditional on the Time Trial quick restart,
though - removing it would mean being able to quick restart during a
fade-in, and thus being able to spam Enter over and over to keep
re-starting the fade animation, which looks goofy.
The hooks to bring up the map screen, pause screen, quit from Super
Gravitron, restart Time Trial, and commit suicide have now been hoisted
out of the for-loop that checked for a player entity. None of these
actions require a player entity, and there's no good reason to take away
your control from any of these actions, especially being able to quit to
the menu. The only actions inside the for-loop now are activating a
terminal and activating a teleporter, both of which require a player
entity to be standing in front of a terminal or teleporter, and both of
which have good reasons to be temporarily disabled.
This makes it so the fix for crewmates' drawframes being wrong for
1-frame is fixed for all crewmates regardless of when they get created.
Sure, crewmates created in mapclass::loadlevel() have their drawframes
fixed there, but for crewmates that get created from scripting (such as
Violet when gotorooming to the Ship teleporter room after Space Station
1), this fix doesn't apply to them. But now it does, and Violet will no
longer be facing the wrong way for 1 frame when teleporting to the Ship
teleporter room in the Space Station 1 Level Complete cutscene.
If the player is stuck in a wall (which shouldn't happen in the first
place), their sprite would always default to being flipped, even if they
were unflipped.
Being stuck in a wall is characterized by having both positive onfloor
and onground.
It's perfectly acceptable to have both warp lines and a warping
background in the same room. Many levels do this exact thing, I would
say at least 30 or so levels, many of them popular and played by many,
and this has never caused any issues at all.
All that having both warp lines and warp BG does is make it so the
warping of the warping background gets overriden by the warp lines, but
make it so the background is still a warp background. So in effect, you
can have a warp background without any warping. This is perfectly
defined behavior. Except, for whatever reason, it's unintentional, and
the editor tries to prevent you from doing it.
Key word being "tries". The code to prevent having both warp types is
bugged (at least when you change the warp BG. The check when you place
warp lines seems to be solid). It compares the p1 and p2 attributes of
warp lines to the x-coordinate and y-coordinate of the room, despite p1
and p2 having nothing to do with room coordinates. p1 is the type of the
warp line and should be treated as an enum, and p2 is the offset of the
warp line from the top/left of the screen. This results in this check
sometimes working if you're unlucky, but never actually working properly
most of the time. This means people can first place warp lines, and then
change the warp background later, to have both warp lines and a warp
background.
Having these checks just further complicates the code, makes it more
error-prone, and just inconveniences people when they want to do
something that's perfectly fine to do. So it's best if we just remove
these checks.
Fixes#402 (Violet appearing 1 frame after the Ship teleporter room
appears).
The root cause of this bug is due to the game loop order changes made
with the over-30-FPS patch. 2.2's game loop order was gameinput(),
gamerender(), then gamelogic(). In 2.3, gamerender() was moved to the end
as it required special code to render more than 30 frames a second. So
2.3's game loop order is gameinput(), gamelogic(), then gamerender().
In hindsight, I could have preserved the game loop order, but this would
require some more complex code in the game loop than what is there
currently. Fixing it now would fix rendering glitches such as this one
(along with being able to remove script.dontrunnextframe with the
two-frame-delay fix), but it could also introduce new rendering glitches
we don't yet know about. After discussing this in Discord DMs with
flibit, we agreed that the game loop order should be fixed in 2.4
instead.
When the game teleports you, gamelogic() runs script.teleport(). This
function will gotoroom to the teleporter destination, then it loads the
teleport script. Some teleport scripts (such as levelonecomplete, which
creates Violet) expect that their entities will be created, and more
generally that their script will be ran, on the same frame that the
gotoroom happens, i.e. by the time that the next gamerender() happens,
i.e. script.run() should be ran before the next gamerender() happens.
This would be true on the old game loop order, but with the new game
loop order, gamerender() gets ran directly after gamelogic() with no
script.run() in between.
To fix this, I did the same thing I did with the two-frame-delay fix
(#317), where I ran the script for that frame, but in order to prevent
running it twice I set script.dontrunnextframe to true.
This is a follow-up to #421.
The game would draw the activity zone if there was one active at all,
and would ignore game.act_fade. Normally this wouldn't be a problem, but
since #421, it's possible that there could be an active activity zone
but game.act_fade would still be 5. This would happen if you entered a
new activity zone while a cutscene was running.
To fix this, just make it so that the prompt gets drawn on its own and
only depends on the state of game.act_fade (or game.prev_act_fade), and
won't be unconditionally drawn if there's an active activity zone. As a
bonus, this de-duplicates the drawing of the activity prompt, so it's no
longer copy-pasted.
This fixes a bug where opening a script, then closing the script but not
exiting the script list, then opening a script again (it can be the same
script as before) would result in you being unable to type in the
script. You would have to close the script, then close the script list,
then re-open the script list in order to be able to type properly.
This was caused by the fact that key.enabletextentry() was being called
when the script list was opened, but key.disabletextentry() was being
called when closing a script. So the fix for this is to simply move the
key.enabletextentry() to its proper place, which is when the script is
being opened, and not when the script list is.
Some levels rely specifically on the fact that certain script boxes are
loaded using gamestates, instead of directly loading the script and
bypassing the gamestate system. Then weird things could happen. This
restores compatibility with those levels.
mapclass::twoframedelayfix() doesn't need to be updated because the
point of that function is to bypass the gamestate system entirely
anyways.
There's not really any need for it to be there. It gets called when the
Time Trial restarts, as restarting the Time Trial calls
script.startgamemode(), which calls script.hardreset() anyway.
Furthermore, since script.hardreset() is removed, we can also remove two
lines that are meant to work around the fact that everything gets reset,
which is now no longer the case.
Fixes#367.
Previously, it was assuming that the number of PPPPPP/MMMMMM tracks
would always be 16, since if that wasn't the case... then the game would
rudely and abruptly segfault when attempting to load the file. Huh.
But now that the game properly deals with invalid headers, it's possible
for the number of tracks to be 0. So I'll need to remove this
assumption.
It's possible that musicReadBlob.getIndex() could return the sentinel
value of -1 in case the header with that name is invalid, in which case
we should simply not do anything. Otherwise it'll lead to segfaults. I
opted to do the full bounds check just to be safe, too.
For further safety, I hardcoded the max number of headers, 128, less, so
128 is copy-pasted less and in the future if it needs to be changed
it'll only have to be changed in one place.
The binary blob shouldn't return an index if it ends up being invalid.
That could cause a whole lot of issues if musicclass ends up parsing the
resulting struct.
With all that said, though, musicclass doesn't check the -1 sentinel
value anyway, even though it should, but that'll be fixed later.
This fixes the bug where in glitchrunner mode, quitting to the menu
would always put you back at the play menu on the first option, instead
of the menu you entered the game from.
The problem is the script.hardreset() that gets called before the game
actually quits to the menu, so when Game::quittomenu() gets called to
quit to the menu, all the variables that keep track of whether you're in
a certain gamemode, such as game.insecretlab and map.custommode, all get
prematurely reset before that function can read them and put you back to
the correct menu.
The solution here is to simply reset only what's needed when quitting to
the menu. Specifically, in order for credits warp to work,
script.running needs to be set to false and all the text boxes need to
be removed. Text boxes need to be gone so the "- Press ACTION to advance
text -" prompt will stay up without a text box, enabling the player to
increment the gamestate at will by pressing ACTION, and the script needs
to stop running so further text boxes don't spawn in.
Fixes#389.
After looking at pull request #446, I got a bit annoyed that we have TWO
variables, key.textentrymode and ed.textentry, that we rolled ourselves
to track the state of something SDL already provides us a function to
easily query: SDL_IsTextInputActive(). We don't need to have either of
these two variables, and we shouldn't.
So that's what I do in this patch. Both variables have been axed in
favor of using this function, and I just made a wrapper out of it, named
key.textentry().
For bonus points, this gets rid of the ugly NO_CUSTOM_LEVELS and
NO_EDITOR ifdef in main.cpp, since text entry is enabled when entering
the script list and disabled when exiting it. This makes the code there
easier to read, too.
Furthermore, apparently key.textentrymode was initialized to *true*
instead of false... for whatever reason. But that's gone now, too.
Now, you'd think there wouldn't be any downside to using
SDL_IsTextInputActive(). After all, it's a function that SDL itself
provides, right?
Wrong. For whatever reason, it seems like text input is active *from the
start of the program*, meaning that what would happen is I would go into
the editor, and find that I can't move around nor place tiles nor
anything else. Then I would press Esc, and then suddenly become able to
do those things I wanted to do before.
I have no idea why the above happens, but all I can do is to just insert
an SDL_StopTextInput() immediately after the SDL_Init() in main.cpp. Of
course, I have to surround it with an SDL_IsTextInputActive() check to
make sure I don't do anything extraneous by stopping input when it's
already stopped.
All that pressing R does in No Death Mode is end your run. As a result,
it'll only be pressed by accident, so it's better to just disable it
instead.
It's not even useful to quick-restart, because it's faster to quit and
go through the menu again than it is to wait through the Game Over
screen.
Additionally, I removed the `game.deathseq<=0` conditional because it's
unnecessary due to the if-statement already being inside a
`game.deathseq == -1` conditional.
