This can happen if you select an option in a menu that (A) returns to
the previous menu and (B) saves settings. If the settings save fails,
this will create another menu on the same frame that cycles the tower BG
after it's already been cycled for that frame. Examples are the slowdown
and glitchrunner menus.
I could fix this by creating a new function that copy-pastes all of
Game::savestatsandsettings_menu() except for the map.nexttowercolour()
at the end. But that's copy-pasting code.
Instead what I've done is added a variable to signal if the color has
already been cycled this frame, so we don't cycle it again. This also
covers cases of possible double-cycling in the future as well.
Tower backgrounds have a bypos and bscroll. bypos is just the y-position
of the background, and bscroll is the amount of pixels to scroll the
background by on each frame, which is used to scroll it (if it's not
being redrawn) and for linear interpolation.
For the tower background (and not the title background), bypos is
map.ypos / 2, and bscroll is (map.ypos - map.oldypos) / 2. However,
usually bscroll gets assigned at the same time bypos is incremented or
decremented, so you never see that calculation explicitly - except in
the previous commit, where I worked out the calculation because the
change in y-position isn't a known constant.
Having to do all these calculations every time introduces the
possibility of errors where you forget to do it, or you do it wrongly.
But that's not even the worst; you could cause a linear interpolation
glitch if you decide to overwrite bscroll without taking into account
map.oldypos and map.ypos.
So that's why I'm adding a function that automatically updates the tower
background, using the values of map.oldypos and map.ypos, that is used
every time map.ypos is assigned. That way, we have to write less code,
you can be sure that there's no place where we forget to do the
calculations (or at least it will be glaringly obvious) or we do it
wrongly, and it plays nicely with linear interpolation. This also
replaces every instance where the manual calculations are done with the
new function.
These places didn't assign map.oldypos when they assigned map.ypos. This
could have only resulted in visual glitches, but it's good to be
consistent and proactively fix these.
This fixes being able to make music fully fade in (or out) by unfocusing
the game, or making the fade bars fully fade in (or out) by unfocusing
the game, or racking up the timer while the game is unfocused.
This adds <musicvolume> and <soundvolume> tags to unlock.vvv and
settings.vvv, so users' volume preferences will be persistent across
game sessions. This does not add the user interface to change them from
in-game; the next commit will do that.
So it looks like facb079b35 (PR #316) had
a few issues.
The SDL performance counter doesn't really work that well. Testing
reveals that unfocusing and focusing the game again results in
the resumemusic() script command resuming the track at the wrong time.
Even when not unfocusing the game at all, stopping a track and resuming
it resumes it at the wrong time. (Only disabling the unfocus pause fixes
this.)
Furthermore, there's also the fact that the SDL performance counter
keeps incrementing when the game is paused under GDB. So... yeah.
Instead of dealing with the SDL performance counter, I'm just going to
pause and resume the music directly (so the stopmusic() script command
just pauses the music instead). As a result, we no longer can keep
constantly calling Mix_PauseMusic() or Mix_ResumeMusic() when focused or
unfocused, so I've moved those calls to happen directly when the
relevant SDL events are received (the constant calls were originally in
VCE, and whoever added them (I'm pretty sure it was Leo) was not the
sharpest tool in the shed...).
And we are going to switch over to using our own fade system instead of
the SDL mixer fade system. In fact, we were already using our own fade
system for fadeins after collecting a trinket or a custom level
crewmate, but we were still using the mixer system for the rest. This is
an inconsistency that I am glad to correct, so we're also doing our own
fadeouts now.
There is, however, an issue with the fade system where the length it
goes for is inaccurate, because it's based on a volume-per-frame second
calculation that gets truncated. But that's an issue to fix later - at
least what I'm doing right now makes resumemusic() and musicfadein()
work better than before.
This is an option for speedrunners whose muscle memory is precisely
trained and used to the 1-frame input delay that existed in 2.2 and
below. It is located in Game Options -> Advanced Options, and is off by
default.
To re-add the 1-frame input delay, we simply move the key.Poll() to the
start of the frame, instead of before an input function gets ran -
undoing what #535 did.
There is a frame ordering-sensitive issue here, where toggling
game.inputdelay at the wrong time could cause double-polling. However,
we only toggle it in an input function, which regardless is always
guaranteed to be ran after key.Poll() (it either happened at the start
of the frame or just before the input function got ran), so this is not
an issue. But, in case we ever need to toggle this variable in the
future, we can just use the defer callbacks system to defer the toggle
to the end of the frame - also added by #535.
Added at the request of Habeechee on the VVVVVV speedrunning Discord
server.
One of the solutions to the quit signal unfocus pause regression is to
add a no-op delta func to the unfocused func table. However, this
results in the game being stuck in unfocus pause forever, because when
it reaches the end of a list on a delta func, it won't reassign the
active functions - only when the end of a list is a fixed func will it
do so. A workaround is to then add a no-op fixed func afterwards, but
that's inelegant.
The solution in the end to the quit signal regression is to not bother
with adding a delta func, so the game as of right now actually never has
a delta func at the end of a list, and probably never will - but this is
one piece of technical debt I don't want to leave laying around. In case
we're ever going to put a delta function at the end of a list, I've made
it so that delta functions will now reassign the list of active funcs if
they happen to be at the end of the func list.
This fixes a regression introduced by #535 where a quit signal (e.g.
Ctrl-C) sent to the window while the game was in unfocus pause wouldn't
close the game.
One problem was that key.quitProgram would only be checked when control
flow switched back to the outer loop in main(), which would only happen
when the loop order state machine switched to a delta function. As the
unfocused func table didn't have any delta functions, this means
key.quitProgram would never be checked.
So a naïve solution to this would just be to add a no-op delta func
entry to the unfocused func table. However, we then run into a separate
issue where a delta function at the end of a func list never reassigns
the active funcs, causing the game to be stuck in the unfocus pause
forever. Active func reassignment only happens after fixed funcs. So
then a naïve solution after that would be to simply add a no-op fixed
func entry after that. And indeed, that would fix the whole issue.
However, I want to do things the right way. And this does not seem like
the right way. Even putting aside the separate last-func-being-delta
issue, it mandates that every func list needs a delta function. Which
seems quite unnecessary to me.
Another solution I considered was copy-pasting the key.quitProgram check
to the inner loops, or adding some sort of signal propagation to
the inner loops - implemented by copy-pasting checks after each loop -
so we didn't need to copy-paste key.quitProgram... but that seems really
messy, too.
So, I realized that we could throw away key.quitProgram, and simply call
VVV_exit() directly when we receive an SDL_QUIT event. This fixes the
issue, this removes an unnecessary middleman variable, and it's pretty
cleanly and simply the right thing to do.
Flip Mode flips all the unfocus pause screen text upside-down, to make
it read in reverse order. This looks kind of strange to me, and I don't
think it was intended. So I'm flipping the text again so it's the right
way up in Flip Mode.
Since mainmenu is only ever used in Input.cpp, I might as well make it
clearer by moving it into a static global variable in Input.cpp. (The
same applies to fadetolab/fadetomenu, but I didn't think much about
those at the time... that'll be a refactor for later.)
PR #279 added game.gametimer solely for the editor ghosts feature. It
seems that whoever originally wrote it (Leo for the now-dead VVVVVV:
Community Edition, I believe) forgot that the game already had its own
timer, that they could use.
The game timer does increment on unfocus pause (whereas this doesn't),
but that's a separate issue, and it ought to not do that.
Clang warns on this. This doesn't fix anything but it does ensure that
whoever's reading it won't be focused as to whether or not omitting the
second set of braces is legal or not.
In 2.2, at render time, the game rendered screenshakes and flashes if
their timers were above 0, and then decremented them afterwards. The
game would also update the analogue filter right before rendering it,
too.
In 2.3, this was changed so the flash and screenshake timers were
unified, and also done at the end of the frame - right before rendering
happened. This resulted in 1-frame flashes and screenshakes not
rendering at all. The other changes in this patchset don't fix this
either. The analogue filter was also in the wrong order, but that is
less of an issue than flashes and screenshakes.
So, what I've done is made the flash and screenshake timers update right
before the loop switches over to rendering, and only decrements them
when we switch back to fixed functions (after rendering). The analogue
filter is also updated right before rendering as well. This restores
1-frame flashes and screenshakes, as well as restores the correct order
of analogue filter updates.
To do this, GAMEMODE input needs to be processed, and Viridian needs to
be moved, in the same sequence between render frames. So just move
gameinput to after gamerender. Yes, this is not 2.2 order, but gameinput
only handles player input and nothing else - plus a 1-frame input delay
feels really awful to play with in over-30-mode.
In order to re-remove the 1-frame input delay, we will have to poll
input right after rendering a frame - in other words, just before an
input function gets called.
To do this, I've added a new function enum type - Func_input - that is
the same as a fixed function, but before its function gets called,
key.Poll() gets called. And all input functions have been updated to use
this enum accordingly.
Sometimes, there needs to be code that gets ran at the end of the game
loop, otherwise rendering issues might occur. Currently, we do this by
special-casing each deferred routine (e.g. shouldreturntoeditor), but it
would be better if we could generalize this deference instead.
Deferred callbacks can be added using the DEFER_CALLBACK macro. It takes
in one argument, which is the name of a function, and that function must
be a void function that takes in no arguments. Also, due to annoying C++
quirks, void functions taking no arguments cannot be attributes of
objects (because they have an implicit `this` parameter), so it's
recommended to create each callback separately before using the
DEFER_CALLBACK macro.
The previous location of this loop was placed there because it happened
just after the end of the render function. Now that the loop order is
fixed, the first thing that happens after the render function is the
start of gamelogic(), so this loop should go there now, else entity
positions won't be interpolated.
Also it now preincrements instead of postincrements because I like
preincrements.
Okay, so the reason why all render functions were moved to the end of
the frame in #220 is because it's simpler to call two fixed functions
and then a delta function instead of one fixed function, then a delta
function, and then another fixed function.
This is because fixed functions need special handling inside
deltaloop(), and you can't simply duplicate this handling after calling
a delta function. Oh, and to make matters worse, it's not always
fixed-delta-fixed, sometimes (like in MAPMODE and TELEPORTERMODE) it's
delta-fixed-fixed, so we'd need to handle that somehow too.
The solution here is to generalize the game loop and factor out each
function, instead of hardcoding it. Instead of having hardcoded
case-switches directly in the loop, I made a function that returns an
array of functions for a given gamestate, along with the number of
functions, then the game loop processes it accordingly. In fixedloop(),
it iterates over the array and executes each function until it reaches a
delta function, at which point it stops. And when it reaches the end of
the array, it goes back to the start of the array.
But anyway, if it gets to a delta function, it'll stop the loop and
finish fixedloop(). Then deltaloop() will call the delta function. And
then on the next frame, the function index will be incremented again, so
fixedloop() will call the fixed functions again.
Actually, the previous game loop was actually made up of one big loop,
with a gamestate function loop nested inside it, flanked with code that
ran at the start and end of the "big loop". This would be easy to handle
with one loop (just include the beginning and end functions with the
gamestate functions in the array), except that the gamestate functions
could suddenly be swapped out with unfocused functions (the ones that
run when you unfocus the window) at any time (well, on frame boundaries,
since key.isActive only got checked once, guarding the entire "inner
loop" - and I made sure that changing key.isActive wouldn't immediately
apply, just like the previous game loop order) - so I had to add yet
another layer of indirection, where the gamestate functions could
immediately be swapped out with the unfocused functions (while still
running the beginning and end code, because that was how the previous
loop order worked, after all).
This also fixes a regression that the game loop that #220 introduced
had, where if the fixed functions switched the gamestate, the game would
prematurely start rendering the gamestate function of the new gamestate
in the deltaframes, which was a source of some deltaframe glitches. But
fixing this is likely to just as well cause deltaframe glitches, so it'd
be better to fix this along with fixing the loop order, and only have
one round of QA to do in the end, instead of doing one round after each
change separately.
Fixes #464... but this isn't the end of the patchset. There are bugs
that need to be fixed, and kludges that need to be reverted.
As part of my work in #535, I've noticed that 2.3 currently with 2.2
loop order doesn't have interpolated cutscene bars. This is because
cutscene bars in 2.3 get updated at the start of the frame, which
interpolates them correctly until the render functions are put in their
proper place.
There is, however, a somewhat bigger issue, outside the scope of #535,
where cutscene bars always get updated regardless of which gamemode you
are in. Previously in 2.2 and previous, cutscene bars only got updated
in GAMEMODE and TELEPORTERMODE; sometime during 2.3, the cutscene bars
timer got pulled out of all the individual game modes and moved to the
very start of the loop. (I was probably the one who did this change;
I've been caught in a trap of my own devising.)
Thus, going to MAPMODE during the cutscene bars animation doesn't keep
their position paused like it would in 2.2. This is also categorically a
more-than-visual change, since the untilbars() script command depends
on the cutscene bars timer. I see no reason for the cutscene bars to
behave differently in this way than 2.2; #535 would also end up doing
the same fix more-or-less anyway.
Since TELEPORTERMODE currently uses the same renderfixed function as
MAPMODE, I've had to add a teleporterrenderfixed() that just calls
maprenderfixed(), but also does the cutscene bars timer.
This moves the responsibility of toggling fullscreen when any of the
three toggle fullscreen keybinds are pressed (F11, Alt+Enter, Alt+F)
directly into key.Poll() itself, and not its caller (which is main() -
more specifically, fixedloop()). Furthermore, the fullscreen toggle
itself has been moved to a separate function that key.Poll() just calls,
to prevent cluttering key.Poll() with more business logic (the function
is already quite big enough as it is).
As part of my work in re-removing the 1-frame input delay in #535, I'm
moving the callsite of key.Poll() around, and I don't want to have to
lug this block of code around with it. I'd rather refactor it upfront
than touch any more lines than necessary in that PR.
ClearSurface() is less verbose than doing it the old way, and also
conveys intent clearer. Plus, some of these FillRect()s had hardcoded
width and height values, whereas ClearSurface() doesn't - meaning this
change also has better future-proofing, in case the widths and heights
of the surfaces involved change in the future.
Apparently in C, if you have `void test();`, it's completely okay to do
`test(2);`. The function will take in the argument, but just discard it
and throw it away. It's like a trash can, and a rude one at that. If you
declare it like `void test(void);`, this is prevented.
This is not a problem in C++ - doing `void test();` and `test(2);` is
guaranteed to result in a compile error (this also means that right now,
at least in all `.cpp` files, nobody is ever calling a void parameter
function with arguments and having their arguments be thrown away).
However, we may not be using C++ in the future, so I just want to lay
down the precedent that if a function takes in no arguments, you must
explicitly declare it as such.
I would've added `-Wstrict-prototypes`, but it produces an annoying
warning message saying it doesn't work in C++ mode if you're compiling
in C++ mode. So it can be added later.
Note that level dir listing still uses plenty of STL (including the end
product - the `LevelMetaData` struct - which, for the purposes of 2.3,
is okay enough (2.4 should remove STL usage entirely)); it's just that
the initial act of iterating over the levels directory no longer takes
four or SIX(!!!) heap allocations (not counting reallocations and other
heap allocations this patch does not remove), and no longer does any
data marshalling.
Like text splitting, and binary blob extra indice grabbing, the current
approach that FILESYSTEM_getLevelDirFileNames() uses is a temporary
std::vector of std::strings as a middleman to store all the filenames,
and the game iterates over that std::vector to grab each level metadata.
Except, it's even worse in this case, because PHYSFS_enumerateFiles()
ALREADY does a heap allocation. Oh, and
FILESYSTEM_getLevelDirFileNames() gets called two or three times. Yeah,
let me explain:
1. FILESYSTEM_getLevelDirFileNames() calls PHYSFS_enumerateFiles().
2. PHYSFS_enumerateFiles() allocates an array of pointers to arrays of
chars on the heap. For each filename, it will:
a. Allocate an array of chars for the filename.
b. Reallocate the array of pointers to add the pointer to the above
char array.
(In this step, it also inserts the filename in alphabetically -
without any further allocations, as far as I know - but this is a
COMPLETELY unnecessary step, because we are going to sort the list
of levels by ourselves via the metadata title in the end anyways.)
3. FILESYSTEM_getLevelDirFileNames() iterates over the PhysFS list, and
allocates an std::vector on the heap to shove the list into. Then,
for each filename, it will:
a. Allocate an std::string, initialized to "levels/".
b. Append the filename to the std::string above. This will most
likely require a re-allocation.
c. Duplicate the std::string - which requires allocating more memory
again - to put it into the std::vector.
(Compared to the PhysFS list above, the std::vector does less
reallocations; it however will still end up reallocating a certain
amount of times in the end.)
4. FILESYSTEM_getLevelDirFileNames() will free the PhysFS list.
5. Then to get the std::vector<std::string> back to the caller, we end
up having to reallocate the std::vector again - reallocating every
single std::string inside it, too - to give it back to the caller.
And to top it all off, FILESYSTEM_getLevelDirFileNames() is guaranteed
to either be called two times, or three times. This is because
editorclass::getDirectoryData() will call editorclass::loadZips(), which
will unconditionally call FILESYSTEM_getLevelDirFileNames(), then call
it AGAIN if a zip was found. Then once the function returns,
getDirectoryData() will still unconditionally call
FILESYSTEM_getLevelDirFileNames(). This smells like someone bolting
something on without regard for the whole picture of the system, but
whatever; I can clean up their mess just fine.
So, what do I do about this? Well, just like I did with text splitting
and binary blob extras, make the final for-loop - the one that does the
actual metadata parsing - more immediate.
So how do I do that? Well, PhysFS has a function named
PHYSFS_enumerate(). PHYSFS_enumerateFiles(), in fact, uses this function
internally, and is basically just a wrapper with some allocation and
alphabetization.
PHYSFS_enumerate() takes in a pointer to a function, which it will call
for every single entry that it iterates over. It also lets you pass in
another arbitrary pointer that it leaves alone, which I use to pass
through a function pointer that is the actual callback.
So to clarify, there are two callbacks - one callback is passed through
into another callback that gets passed through to PHYSFS_enumerate().
The callback that gets passed to PHYSFS_enumerate() is always the same,
but the callback that gets passed through the callback can be different
(if you look at the calling code, you can see that one caller passes
through a normal level metadata callback; the other passes through a zip
file callback).
Furthermore, I've also cleaned it up so that if editorclass::loadZips()
finds a zip file, it won't iterate over all the files in the levels
directory a third time. Instead, the level directory only gets iterated
over twice - once to check for zips, and another to load every level
plus all zips; the second time is when all the heap allocations happen.
And with that, level list loading now uses less STL templated stuff and
much less heap allocations.
Also, ed.directoryList basically has no reason to exist other than being
a temporary std::vector, so I've removed it. This further decreases
memory usage, depending on how many levels you have in your levels
folder (I know that I usually have a lot and don't really ever clean it
up, lol).
Lastly, in the callback passed to PhysFS, `builtLocation` is actually no
longer hardcoded to just the `levels` directory, since instead we now
use the `origdir` variable that PhysFS passes us. So that's good, too.
Wow, there are a lot of these. All of these exit paths now use
VVV_exit() instead, which attempts to save unlock.vvv and settings.vvv,
and also frees all resources so Valgrind is happy. This is a good thing,
because previously unlock.vvv/settings.vvv wouldn't be written to if we
decided to bail for a given reason.
This is just a function that calls the cleanup() in main.cpp, as well as
calls exit().
I would have liked to use SDL_ExitProcess() here, because that function
has ifdefs for different runtime environments. But alas, it's an
internal function and isn't exported. Ah well; exit() seems to be fine
anyway.
If there's a resource that doesn't otherwise need to be cleaned up and
is still alive upon program shutdown, then it should go in cleanup().
This cleans up Screen, GraphicsResources, Graphics buffers, Graphics
tiles, and musicclass audio upon program shutdown.
Even we technically don't NEED to clean these resources up ourselves
(the kernel is going to get rid of all of it anyway, else it'd be a
security problem), I'm doing this because otherwise Valgrind will
complain about these, and then it'd be difficult to see which memory
leaks are real and which are just "well this isn't really a leak but you
haven't freed this thing when the process exited, and that's technically
what a memory leak is".
These are all resources whose cleanup functions can be safely called
even if they haven't initialized anything yet.
It doesn't feel quite write leaving all the buffer creation code in
main(), even though it's perfectly okay to do so and it doesn't result
in any memory mismanagement that Valgrind can report; so I'm factoring
all of it out to a separate function, Graphics::create_buffers().
As a bonus, we no longer have to keep qualifying with `graphics.` in the
buffer creation code, which is nice.
This call to Makebfont() always existed, but ever since 2.3's per-level
custom assets were added, graphics.reloadresources() also calls
graphics.Makebfont(), meaning this call is unnecessary. Calling it twice
results in graphics.bfont and graphics.flipbfont having twice the number
of elements, until custom assets get mounted (or unmounted, technically).
During 2.3 development, there's been a gradual shift to using SDL stdlib
functions instead of libc functions, but there are still some libc
functions (or the same libc function but from the STL) in the code.
Well, this patch replaces all the rest of them in one fell swoop.
SDL's stdlib can replace most of these, but its SDL_min() and SDL_max()
are inadequate - they aren't really functions, they're more like macros
with a nasty penchant for double-evaluation. So I just made my own
VVV_min() and VVV_max() functions and placed them in Maths.h instead,
then replaced all the previous usages of min(), max(), std::min(),
std::max(), SDL_min(), and SDL_max() with VVV_min() and VVV_max().
Additionally, there's no SDL_isxdigit(), so I just implemented my own
VVV_isxdigit().
SDL has SDL_malloc() and SDL_free(), but they have some refcounting
built in to them, so in order to use them with LodePNG, I have to
replace the malloc() and free() that LodePNG uses. Which isn't too hard,
I did it in a new file called ThirdPartyDeps.c, and LodePNG is now
compiled with the LODEPNG_NO_COMPILE_ALLOCATORS definition.
Lastly, I also refactored the awful strcpy() and strcat() usages in
PLATFORM_migrateSaveData() to use SDL_snprintf() instead. I know save
migration is getting axed in 2.4, but it still bothers me to have
something like that in the codebase otherwise.
Without further ado, here is the full list of functions that the
codebase now uses:
- SDL_strlcpy() instead of strcpy()
- SDL_strlcat() instead of strcat()
- SDL_snprintf() instead of sprintf(), strcpy(), or strcat() (see above)
- VVV_min() instead of min(), std::min(), or SDL_min()
- VVV_max() instead of max(), std::max(), or SDL_max()
- VVV_isxdigit() instead of isxdigit()
- SDL_strcmp() instead of strcmp()
- SDL_strcasecmp() instead of strcasecmp() or Win32 strcmpi()
- SDL_strstr() instead of strstr()
- SDL_strlen() instead of strlen()
- SDL_sscanf() instead of sscanf()
- SDL_getenv() instead of getenv()
- SDL_malloc() instead of malloc() (replacing in LodePNG as well)
- SDL_free() instead of free() (replacing in LodePNG as well)
This variable seems to have been intended to make sure
game.savestatsandsettings() was called at the end of the frame, or make
sure that it didn't get called more than once per frame. I don't see any
frame ordering-related reason why it needs to be called specifically at
the end of the frame (the function doesn't modify any state), so it's
more plausible that it was added to make sure it didn't get called more
than one per frame.
However, upon further analysis, none of the code paths where
game.savemystats is used ever calls or sets game.savemystats more than
once, and a majority of the code directly calls
game.savestatsandsettings() anyway, so there's no reason for this
variable to exist. If we ever need to make sure it doesn't get called
more than once, and there's no way to change the code paths around to
prevent it otherwise, we can use the defer callbacks system that I added
to #535, when it gets merged.
This patch cleans up unnecessary exports from header files (there were
only a few), as well as adds the static keyword to all symbols that
aren't exported and are specific to a file. This helps the linker out in
not doing any unnecessary work, speeding it up and avoiding silent
symbol conflicts (otherwise two symbols with the same name (and
type/signature in C++) would quietly resolve as okay by the linker).
Line clipping and second-frame edge-flipping have been broken since #539
was merged (d910c5118d). The cause of this
is moving the onground/onroof code around.
A proper loop order fix is going to come once #535 gets finalized and
merged, so this is a stopgap measure just to make sure people don't
report that line clipping or second-frame edge-flipping are broken in
current builds of 2.3.
This fixes a bug where if you completed a custom level during
command-line playtesting, when returning to the title screen, the
background would be red and the text would be white.
This is because playtesting skips over the code path of pressing ACTION
to start the game and advance to the title screen, and the code path of
that ACTION press specifically initializes the title screen colors to
cyan.
This is also caused by the fact that completing a custom level doesn't
call map.nexttowercolour(), but my guess is that the intent there was
that the player would select a custom level, complete it, and return to
the title screen on the same screen with the same colors, so I decided
not to add a map.nexttowercolour() there.
Instead, I've moved the cyan color initialization to main(), so that it
is always executed no matter what, and doesn't require you to take a
specific code path to do it.
While I was working on #535, I noticed that all the call sites of
script.run() have the exact same code, namely:
if (script.running)
{
script.run();
}
I figured, why not move the script.running check into the function
itself? That way, we won't have to duplicate the check every single
time, and we don't risk forgetting to add the check and causing a bug
because of that.
The check was already duplicated once since 2.0 (it's used in both
GAMEMODE and TELEPORTERMODE), and with the fix of the two-frame delay in
2.3, it's now duplicated twice, leading to THREE instances of this check
in the code, when there should be only one.
In order to be able to fix the bug #556, I'm planning on adding
ScreenSettings* to the settings.vvv write function. However, that
entails adding another argument to Game::savesettings(), which is going
to be really messy given the default argument of Game::savestats().
That, combined with the fact that the code comment at the site of the
implementation of Game::savestats() being wrong (!!!), leads me to
believe that using default function arguments here isn't worth it.
Instead, what I've done is made it so callers are explicit about whether
or not they're calling savestats(), savesettings(), or both at the same
time. If they are calling both at the same time, then they will be using
a new function named savestatsandsettings().
In short, these are the interface changes:
* bool Game::savestats(bool) has been removed
* bool Game::savestatsandsettings() has been added
* void Game::savestats_menu() has been renamed to
void Game::savestatsandsettings_menu()
* All previous callers of bool Game::savestats() are now using bool
Game::savestatsandsettings()
* The one caller of bool Game::savestats(bool) is now using bool
Game::savestats()
While there already exists an option to skip the fake loading screen
entirely (without requiring an ACTION press), there are several reasons
for including this option as well:
* So people upgrading from 2.2 won't have to sit through the fake
loading screen the first time they open 2.3.
* So if people are too lazy to use the existing option, they can use
this one instead.
* So tool-assisted speedruns (TASes) of this game can skip the fake
loading screen without requiring an existing settings.vvv beforehand.
This last one is the biggest reason for me, since I'm not sure what
TASVideos.org rules are regarding existing save files, but with this
change nobody has to worry about their rules and can safely just
press ACTION to skip the fake loading screen automatically.
As part of fixing #464, I'll need to move these pieces of code around
easily. In #220 I just kind of shoved them awkwardly in whatever
fixed function would be last called in the gamestate loop, which I
shouldn't have done as I've now had to make formal fixed-render
functions anyway. Because these fixed functions need to be called
directly before a render function, and I'm fixing the order to put
render functions in their proper place, so I need to be able to move
these around easily, and making them function calls instead of inlined
makes them easier to manipulate.
game.gameframerate seems to exist for converting the value of
game.slowdown into an actual timestep value, when really the timestep
value should just use game.slowdown directly with a fast lookup table.
Otherwise, there's a bunch of duplicated game.slowdown case-switches
everywhere, which adds up to a large, annoying pile should the values be
changed in the future. But now the duplicate variable has been removed,
and with it, all the copy-pasted case-switches.
Also, the game speed text rendering in Menu::accessibility and
Menu::setslowdown has been factored out to a function and de-duplicated
as well.
There were some duplicate Screen configuration variables that were on
Game, when there didn't need to be.
- game.fullScreenEffect_badSignal is a duplicate of
graphics.screenbuffer->badSignalEffect
- game.fullscreen is a duplicate of !graphics.screenbuffer->isWindowed
- game.stretchMode is a duplicate of graphics.screenbuffer->stretchMode
- game.useLinearFilter is a duplicate of
graphics.screenbuffer->isFiltered
These duplicate variables have been removed now.
I put indentation when handling the ScreenSettings struct in main() so
the local doesn't live for the entirety of main() (which is the entirety
of the program).
The game previously did this dumb thing where it lumped in all its
settings with its file that tracked your records and unlocks,
`unlock.vvv`. It wasn't really an issue, until 2.3 came along and added
a few settings, suddenly making a problem where 2.3 settings would be
reset by chance if you decided to touch 2.2.
The solution to this is to move all settings to a new file,
`settings.vvv`. However, for compatibility with 2.2, settings will still
be written to `unlock.vvv`.
The game will prioritize reading from `settings.vvv` instead of
`unlock.vvv`, so if there's a setting that's missing from `unlock.vvv`,
no worries there. But if `settings.vvv` is missing, then it'll read
settings from `unlock.vvv`. As well, if `unlock.vvv` is missing, then
`settings.vvv` will be read from instead (I explicitly tested for this,
and found that I had to write special code to handle this case,
otherwise the game would overwrite the existing `settings.vvv` before
reading from it; kids, make sure to always test your code!).
Closes#373 fully.
Instead of using the same tower buffer that gets used for towers, use a
separate buffer instead so there's no risk of stepping on the tower
buffer's toes at the wrong point in time.
This commit combined with the previous one fixes#369.
With the previous commit in place, we can now simply move some usages of
the previous towerbg to use a separate object instead. That way, we
don't have to mess with a monolithic state, or some better way to phrase
what I just said, and we instead have two separate objects that can
coexist side-by-side.
Previously, the tower background was controlled by a disparate set of
attributes on Graphics and mapclass, and wasn't really encapsulated. (If
that's what that word means, I don't particularly care about
object-oriented lingo.) But now, all relevant things that a tower
background has has been put into a TowerBG struct, so it will be easy to
make multiple copies without having to duplicate the code that handles
it.
I was investigating a desync in my Nova TAS, and it turns out that
the gravity line collision functions check for the `oldxp` and `oldyp`
of the player, i.e. their position on the previous frame, along with
their position on the current frame. So, if the player either collided
with the gravity line last frame or this frame, then the player collided
with the gravity line this frame.
Except, that's not actually true. It turns out that `oldxp` and `oldyp`
don't necessarily always correspond to the `xp` and `yp` of the player
on the previous frame. It turns out that your `oldyp` will be updated if
you stand on a vertically moving platform, before the gravity line
collision function gets ran. So, if you were colliding with a gravity
line on the previous frame, but you got moved out of there by a
vertically moving platform, then you just don't collide with the gravity
line at all.
However, this behavior changed in 2.3 after my over-30-FPS patch got
merged (#220). That patch took advantage of the existing `oldxp` and
`oldyp` entity attributes, and uses them to interpolate their positions
during rendering to make everything look real smooth.
Previously, `oldxp` and `oldyp` would both be updated in
`entityclass::updateentitylogic()`. However, I moved it in that patch to
update right before `gameinput()` in `main.cpp`.
As a result, `oldyp` no longer gets updated whenever the player stands
on a vertically moving platform. This ends up desyncing my TAS.
As expected, updating `oldyp` in `entityclass::movingplatformfix()` (the
function responsible for moving the player whenever they stand on a
vertically moving platform) makes it so that my TAS syncs, but the
visuals are glitchy when standing on a vertically moving platform. And
as much as I'd like to get rid of gravity lines checking for whether
you've collided with them on the previous frame, doing that desyncs my
TAS, too.
In the end, it seems like I should just leave `oldxp` and `oldyp` alone,
and switch to using dedicated variables that are never used in the
physics of the game. So I'm introducing `lerpoldxp` and `lerpoldyp`, and
replacing all instances of using `oldxp` and `oldyp` that my over-30-FPS
patch added, with `lerpoldxp` and `lerpoldyp` instead.
After doing this, and applying #503 as well, my Nova TAS syncs after
some minor but acceptable fixes with Viridian's walkingframe.
Previously, setting the actual volume of the music was all over the
place. Which isn't bad, but when I added being able to press N to mute
the music specifically, I should've made it so that there would be a
volume variable somewhere that the game looks at if the music is
unmuted, and otherwise sets the actual volume to 0 if the game is muted.
This resulted in things like #400 and #505 and having to add a bunch of
special-cased checks like game.musicmuted and game.completestop. But
instead of adding a bunch of special-case code, just make it so there's
a central place where Mix_VolumeMusic() actually gets called, and if
some piece of code wants to set the music volume, they can set
music.musicVolume. But the music handling logic in main.cpp gets the
final say on whether to listen to music.musicVolume, or to mute the game
entirely.
This is how the music handling code should have been from the start
(when pressing N to mute the music was added).
Fixes#505.
After looking at pull request #446, I got a bit annoyed that we have TWO
variables, key.textentrymode and ed.textentry, that we rolled ourselves
to track the state of something SDL already provides us a function to
easily query: SDL_IsTextInputActive(). We don't need to have either of
these two variables, and we shouldn't.
So that's what I do in this patch. Both variables have been axed in
favor of using this function, and I just made a wrapper out of it, named
key.textentry().
For bonus points, this gets rid of the ugly NO_CUSTOM_LEVELS and
NO_EDITOR ifdef in main.cpp, since text entry is enabled when entering
the script list and disabled when exiting it. This makes the code there
easier to read, too.
Furthermore, apparently key.textentrymode was initialized to *true*
instead of false... for whatever reason. But that's gone now, too.
Now, you'd think there wouldn't be any downside to using
SDL_IsTextInputActive(). After all, it's a function that SDL itself
provides, right?
Wrong. For whatever reason, it seems like text input is active *from the
start of the program*, meaning that what would happen is I would go into
the editor, and find that I can't move around nor place tiles nor
anything else. Then I would press Esc, and then suddenly become able to
do those things I wanted to do before.
I have no idea why the above happens, but all I can do is to just insert
an SDL_StopTextInput() immediately after the SDL_Init() in main.cpp. Of
course, I have to surround it with an SDL_IsTextInputActive() check to
make sure I don't do anything extraneous by stopping input when it's
already stopped.
So, earlier in the development of 2.0, Simon Roth (I presume)
encountered a problem: Oh no, all my backgrounds aren't appearing! And
this is because my foregroundBuffer, which contains all the drawn tiles,
is drawing complete black over it!
So he had a solution that seems ingenius, but is actually really really
hacky and super 100% NOT the proper solution. Just, take the
foregroundBuffer, iterate over each pixel, and DON'T draw any pixel
that's 0xDEADBEEF. 0xDEADBEEF is a special signal meaning "don't draw
this pixel". It is called a 'key'.
Unfortunately, this causes a bug where translucent pixels on tiles
(pixels between 0% and 100% opacity) didn't get drawn correctly. They
would be drawn against this weird blue color.
Now, in #103, I came across this weird constant and decided "hey, this
looks awfully like that weird blue color I came across, maybe if I set
it to 0x00000000, i.e. complete and transparent black, the issue will be
fixed". And it DID appear to be fixed. However, I didn't look too
closely, nor did I test it that much, and all that ended up doing was
drawing the pixels against black, which more subtly disguised the
problem with translucent pixels.
So, after some investigation, I noticed that BlitSurfaceColoured() was
drawing translucent pixels just fine. And I thought at the time that
there was something wrong with BlitSurfaceStandard(), or something.
Further along later I realized that all drawn tiles were passing through
this weird OverlaySurfaceKeyed() function. And removing it in favor of a
straight SDL_BlitSurface() produced the bug I mentioned above: Oh no,
all the backgrounds don't show up, because my foregroundBuffer is
drawing pure black over them!
Well... just... set the proper blend mode for foregroundBuffer. It
should be SDL_BLENDMODE_BLEND instead of SDL_BLENDMODE_NONE.
Then you don't have to worry about your transparency at all. If you did
it right, you won't have to resort this hacky color-keying business.
*sigh*
For some reason, the cursor would be either disabled and re-enabled if
you switched to windowed mode, or it would be always enabled if you
switched to fullscreen mode. This only happened when you toggled
fullscreen using the Alt+Enter, Alt+F, or F11 keybinds, and the
fullscreen option in graphic options doesn't have this problem.
This cursor toggling business seems like an arcane incantation back in
the days of SDL1.2, now since no longer necessary with SDL2. However,
after some testing, it seems like removing these indecipherable runes
don't cause any harm, so I'm going to remove them.
Fixes#371.
Achievements could be unlocked in custom levels/make and play, so this adds the wrapper function `game.unlockAchievement` which calls `NETWORK_unlockAchievement` if `map.custommode` is false.
Also, this function and `Game::unlocknum` have both been `ifdef`ed to be empty if MAKEANDPLAY is defined.
Okay, so basically here's the include layout that this game now
consistently uses:
[The "main" header file, if any (e.g. Graphics.h for Graphics.cpp)]
[blank line]
[All system includes, such as tinyxml2/physfs/utfcpp/SDL]
[blank line]
[All project includes, such as Game.h/Entity.h/etc.]
And if applicable, another blank line, and then some special-case
include screwy stuff (take a look at editor.cpp or FileSystemUtils.cpp,
for example, they have ifdefs and defines with their includes).
Including a header file inside another header file means a bunch of
files are going to be unnecessarily recompiled whenever that inner
header file is changed. So I minimized the amount of header files
included in a header file, and only included the ones that were
necessary (system includes don't count, I'm only talking about includes
from within this project). Then the includes are only in the .cpp files
themselves.
This also minimizes problems such as a NO_CUSTOM_LEVELS build failing
because some file depended on an include that got included in editor.h,
which is another benefit of removing unnecessary includes from header
files.
Whoops.
Noticed this earlier when I was merging upstream back into VCE, and
interestingly enough, it doesn't look like cppcheck warns about
undeffing a non-existent define.
This patch optimizes the loop used to limit the framerate in 30-FPS-only
mode so that it uses SDL_Delay() instead of an accumulator. This means
that the game will take up less CPU power in 30-FPS-only mode. This also
means that the game loop code has been simplified, so there's only two
while-loops, and only two places where game.over30mode is checked, thus
leading to easier-to-understand logic.
Using an accumulator here would essentially mean busywaiting until the
34 millisecond timer was up. (The following is just what leo60228 told
me.) Busywaiting is bad because it's inefficient. The operating system
assumes that if you're busywaiting, you're performing a complex
calculation and handles your process accordingly. And this is why
sleeping was invented, so you could busywait without taking up
unnecessary CPU time.
There's a bug where playtesting from Ved doesn't properly play the music
of the level, due to no fault with Ved.
This was because the music was being faded out by
scriptclass::startgamemode() case 23 after main() called music.play().
To fix this, just call music.play() when all the other variables are
being set in Game::customloadquick().
The problem we're running into is entirely contained in the Screen - we need to
either decouple graphics context init from Screen::init or we need to take out
the screenbuffer interaction from loadstats (which I'm more in favor of since we
can just pull the config values and pass them to Screen::init later).
Now that you have a mini menu in MAPMODE, it's a bit annoying to have to
deal with the slowed-down timestep when pressing left/right/ACTION
inside it. Especially since going to an options menu restores the
timestep back to normal (because it's in TITLEMODE). Also removed it
from TELEPORTERMODE for consistency.
The Alt+Enter Glitch is a funny glitch where if you press any toggle
fullscreen keybind during a cutscene, Viridian will stop moving (if
they're being moved by a walk()) and ACTION will start being held down
for them. Meaning in most cases you can interrupt a walk and flip at the
same time.
This can obviously break cutscenes if a casual just wants to toggle
fullscreen, so I'm fixing it. But it will be unfixed in glitchrunner
mode in case you want to glitch out custom levels (I know I do).
More information on the Alt+Enter Glitch is available here:
https://gitgud.io/infoteddy/vvvvvv-knowledge/blob/master/bugs/bugs.md#the-altenter-glitch
(The page is a bit outdated, some bugs have been fixed in 2.3 already.)
This patch is very kludge-y, but at least it fixes a semi-noticeable
visual issue in custom levels that use internal scripts to spawn
entities when loading a room.
Basically, the problem here is that when the game checks for script
boxes and sets newscript, newscript has already been processed for that
frame, and when the game does load a script, script.run() has already
been processed for that frame.
That issue can be fixed, but it turns out that due to my over-30-FPS
game loop changes, there's now ANOTHER visible frame of delay between
room load and entity creation, because the render function gets called
in between the script being loaded at the end of gamelogic() and the
script actually getting run.
So... I have to temporary move script.run() to the end of gamelogic()
(in map.twoframedelayfix()), and make sure it doesn't get run next
frame, because double-evaluations are bad. To do that, I have to
introduce the kludge variable script.dontrunnextframe, which does
exactly as it says.
And with all that work, the two-frame (now three-frame) delay is fixed.
In my previous PR, I wrongly assumed that I could just replace the `i`
handling code of those options with an `i++;` at the beginning, and thus
I could put all blocks' `i++;` into ARG_INNER(). Well I was wrong,
because the code was written the original way for a reason, namely that
we still need `i` to point to the -playx/y/rx/ry/gc/music argv so we can
re-compare which argument led us into this code block.
Just to be helpful if someone has a failing FILESYSTEM_init(), but
doesn't know that's their issue and keeps wondering why VVVVVV just
exits with code 1.
The command-line argument parsing code has a lot of copy-paste. This
copy-paste would get even worse if I added safety checks to make sure
you couldn't index argv out-of-bounds by having an argument like
`-renderer` without having anything after it, i.e. you'd be doing the
command `./VVVVVV -renderer`.
Previously, only the playtest arguments (apart from the recently-added
`playassets`) had this safety check, but the message it printed whenever
the safety check failed was always "-playing option requires one
argument" regardless of whatever argument actually failed to be parsed.
So I fixed it so that all arguments actually output the correct
corresponding failed argument instead.
Also, `strcmp(argv[i], <name>) == 0` is really kind of noisy, even if
you understand what it does perfectly well.
So I refactored it with a bunch of macros. ARG() just does the strcmp()
char* comparison, and ARG_INNER() does the safety check and returns 1,
along with printing a message, if the safety check fails.
This is used if you're loading a level file from STDIN. The game needs
to know the actual level assets directory you're referring to, since
when it gets the level from STDIN, it doesn't know the actual filename
of the level.
Fixes#309.
Ugh, this is terrible and stupid and I hate myself for it.
Anyway, since the SDL2 VSync hint only applies when the renderer is
created, we have to re-create the renderer whenever VSync is toggled.
However, this also means we need to re-create m_screenTexture as well,
AND call ResizeScreen() after that or else the letterbox/integer modes
won't be applied.
Unfortunately, this means that in main(), gameScreen.init() will create
a renderer only to be destroyed later by graphics.processVsync().
There's not much we can do about this. Fixing this would require putting
graphics.processVsync() before gameScreen.init(). However, in order to
know whether the user has VSync set, we would have to call
game.loadstats() first, but wait, we can't, because game.loadstats()
mutates gameScreen! Gahhhhhh!!!!
@leo60228 suggested to fix that problem (
https://github.com/TerryCavanagh/VVVVVV/pull/220#issuecomment-624217939
) by adding NULL checks to game.loadstats() and then calling it twice,
but then you're trading wastefully creating a renderer only to be
destroyed, for wastefully opening and parsing unlock.vvv twice instead
of once. In either case, you're doing something twice and wasting work.
Otherwise a NO_CUSTOM_LEVELS build would fail. Also I got rid of the
'graphics.flipmode = false;' in the fixed loop because I don't think it
does anything.
This is needed for the next step. I want to put all the loop stuff in
their own functions so the code isn't one huge blob, but to do that I'll
need to make 'time' a global variable, but I can't do that because
actually 'time' is already a function, apparently, and you're only
allowed to shadow variables when already inside a function.
This is to make sure no lerping occurs in 30-FPS mode, otherwise things
might look weird. A good case that this fixes is how entities look in a
double-gotoroom (they should be completely frozen in 30-FPS mode).
There is now an option in "graphic options" named "toggle fps", which
toggles whether the game visually runs at 1000/34 FPS or over 1000/34
FPS. It is off by default.
I've had to put the entire game loop in yet another set of braces, I'll
indent it next commit.
This is because otherwise, on my Linux system at least, the game will
take up a lot of CPU that it doesn't really need to (I only have a 60hz
monitor).
On Windows, it looks like Windows already enforces V-sync for
applications anyway, unless they have exclusive fullscreen control.
Linux doesn't enforce V-sync on apps and lets them take up as much CPU
as they want, so I'm putting this here to limit the framerate.
The game is already actually 30 FPS anyway, the nice smooth FPS is just
visual. V-sync won't introduce any more "input lag" than already exists.
As much as it looks cool to have a slowly-scrolling background on the
title screen, it's quite annoying that slowmode applying on the title
screen mean that your keypresses are less responsive.
