Language folders can now have a graphics folder, with these files:
- sprites.png and flipsprites.png: spritesheets which contain
translated versions of the word enemies and checkpoints
- spritesmask.xml: an XML file containing all the sprites that should
be copied from the translated sprites and flipsprites images to
the original sprites/flipsprites.
This means that the translated spritesheets don't have to contain ALL
sprites - they only have to contain the translated ones. When loading
them, the game assembles a combined spritesheet with translated sprites
replacing English ones as needed, and this sheet is used to visually
substitute the normal sprites at rendering time.
It's important to note that even if 32x32 enemies have pixel-perfect
hitboxes, this is only a visual change. This has been discussed several
times on Discord - basically we don't want to give people unfair
advantages or disadvantages because of their language setting, or
change existing gameplay and speedruns tactics, which may depend on the
exact pixel arrangements of the enemies. Therefore, the hitboxes are
still based on the English sprites. This should be basically
unnoticeable for casual players, especially with some thought from
translators and artists, but there will be an option in the speedrunner
menu to display the original sprites all the time.
I removed the `VVV_freefunc(SDL_FreeSurface, *tilesheet)` in
make_array() in Graphics.cpp, which frees grphx.im_sprites_surf and
grphx.im_flipsprites_surf. Since GraphicsResources::destroy() already
frees these, it looks like the only purpose the one in make_array()
serves is to do it earlier. But now we need them again later (when
switching languages) so let's just not free them early.
The intention of the recent refactor was to make it so that the
temporary surfaces would be allocated only once, when the mode is
enabled, and be freed upon exit.
To do this, Graphics.cpp owns the pointers, and passes them to
ApplyFilter to modify. Except ApplyFilter doesn't actually modify the
pointers, because it's only a single pointer, not a pointer-to-pointer.
So every frame of rendering it would actually be creating a new surface
and leaking memory.
To fix this, they need to be pointer-to-pointer variables that get
modified.
I also added error logs in case the surface creation failed.
We had two separate cases for translators for this string (a
"TO UNLOCK:" one and a secret lab trophy one) but I forgot to use
the latter in the code, so both places in the game were using the
former. This is now fixed.
This fixes#1013 by axing the use of SDL_HINT_RENDER_SCALE_QUALITY and
instead using SDL_SetTextureScaleMode.
The hint is unwieldy to use, and since #923, has resulted in a
regression where starting the game in filtered mode then switching to
nearest results in scaled textures still being filtered.
The proper solution is to use SDL_SetTextureScaleMode on the two
textures that are drawn to the final screen: gameTexture and
tempShakeTexture.
This commit removes the `NO_EDITOR` and `NO_CUSTOM_LEVELS` defines,
which cleans up the code a lot, and they weren't really needed anyways.
This commit also disables the editor on the Steam Deck, and adds a
program argument to re-enable the editor, `-enable-editor`.
- ERROR/WARNING screen title was overlapping with message
- Crewmate screen names and rescued statuses were overlapping with each
other
- Textboxes on Level Complete screen were overlapping with each other
and the crewmate was not vertically centered in the box
- Some strings were running into each other in flip mode, instead of
being moved out of each other (PR_CJK_HIGH and PR_CJK_LOW worked the
wrong way around because of FLIP macros being applied to Y coords)
- In-game esc menu was "bouncy" with selected menu options because of a
hardcoded 16 pixel offset
- Bindings in the gamepad menu were overlapping with each other
- Some Super Gravitron "Best Time" labels and values were a little too
close
Turns out `graphics.drawrect` exists. Well, not anymore!
This was another function from before the renderer rewrite which tried
to draw a rectangle by using four filled rectangles. We can draw
outline rectangles properly now, so let's make sure everywhere does it!
As #974 states, the lab background only ever uses the first generated
value from `backboxint`, so let's change it to a normal variable
instead of an array. Also, stars don't need their width/height set to
2 constantly... they never change in the first place, Terry!
Some code still used rectangles to draw things like lines and pixels,
so this commit adds more draw functions to support drawing lines and
pixels without directly using the renderer.
Aside from making generated minimaps draw points instead of 1x1
rectangles, this commit also batches the point drawing for an
additional speed increase.
This replaces the swngame int variable with a named enum and enforces
strict typechecking on it.
Strict typechecking is okay here as the swngame variable is not part of
the API surface of the game in any way and is completely internal.
And just to make things clear, I've added a SWN_NONE enum to use for
initialization, because previously it was being initialized to 0, even
though 0 was the Gravitron.
The clock on the Game Saved quicksave screen has always been upside-down
in Flip Mode. And technically, the trinket was too, but this was
unnoticeable because the default trinket sprite is symmetrical.
To fix this, draw flipsprites.png if these sprites are being drawn in
Flip Mode instead of sprites.png.
This will actually do several things:
(1) Make the tile size checks apply to the appropriate graphics files
once again.
(2) Make the game print a fallback error message if the error message
hasn't been set on the levelDirError error screen.
(3) Use levelDirError for graphics errors too.
(4) Make the error message for tile size checks failing specify both
width and height, not just a square dimension.
(5) Make the error messages mentioned above translatable.
It turns out that (1) didn't happen after #923 was merged, since #923
removed needing to process a tilesheet into a vector of surfaces for all
graphics files except sprites.png and flipsprites.png. Thus, the game
ended up only checking the correct tile sizes for those files only.
In the process of fixing this, I also got rid of the PROCESS_TILESHEET
macros and turned them into two different functions: One to make the
array, and one to check the tile size of the tilesheet.
I also did (2) just in case FILESYSTEM_levelDirHasError() returns false
even though we know we have an error.
And (3) is needed so things are unified and we have one user-facing
error message system when users load levels. To facilitate this, I
removed the title string, since it's really not needed.
Unfortunately, (1) doesn't apply to font.png again, but that's because
of the new font stuff and I'm not sure what Dav999 has in store for
error checking. But that's also why I did (4), because it looks like
tile sizes in font.png files can be different (i.e. non-square).
For some reason, the accessibility option that was meant to disable
flashes doesn't disable ALL flashes, only screen flashes and screen
shaking. This commit disables a lot more, most importantly randomness
in colors, the player flashing on death/respawn, and teleporters
flashing.
Misa asked me if this should only work for non-transparent textboxes,
and it shouldn't - that was kind of an oversight.
To make it work for transparent textboxes as well, I made a little
restructuring to avoid duplicating the code - fill_buttons() is now
called textbox_line(), and it replaces the direct accessing of the
textbox lines in the printing loops. The code that checks the width
of the textbox does not need to be copied, since the text box is
naturally not drawn for transparent text boxes.
As reported by Lilithtreasure on the VVVVVV Discord server, it is
possible to get gray moving platforms and enemies in the main game.
This happens if you play the main game after loading a custom level with
a room that is gray at the same coordinates. E.g. if you play a custom
level with a gray room at (12, 4), then exit and go to Gantry and Dolly
in the main game which is also at (12, 4), then the platforms there
would be gray too.
This is because there is a missing map.custommode check.
There's a few places where textboxes are constructed through code, but
they pass in the color's RGB values in manually. This commit
unhardcodes most of them them, replacing them with a color lookup.
The ones that weren't changed are special cases, like `175, 174, 174`.
This adds mappings from SDL's Xbox-based SDL_GameControllerButton
constants, to glyphs for the following layouts:
- LAYOUT_NINTENDO_SWITCH_PRO,
- LAYOUT_NINTENDO_SWITCH_JOYCON_L,
- LAYOUT_NINTENDO_SWITCH_JOYCON_R,
- LAYOUT_DECK,
- LAYOUT_PLAYSTATION,
- LAYOUT_XBOX,
- LAYOUT_GENERIC,
There may still be errors in these, but they should be mostly correct.
I'm leaving it up to Ethan to make it show the correct button glyphs
for the correct controllers being connected (and possibly to fix these
mappings where needed).
Violet's dialogue now looks like this:
squeak(purple)
text(purple,0,0,2)
Remember that you can press {b_map}
to check where you are on the map!
position(purple,above)
textbuttons()
speak_active
The new textbuttons() command sets the next textbox to replace {b_map}
with the map button, and {b_int} with the interact button. The
remaining keys would be added as soon as they need to be added to
ActionSets.h as well.
Tools were a mess, spread all over the code with hundreds of `else-if`
statements. Instead of magic numbers denoting tools, an enum has been
created, and logic has been extracted into simple switch/cases, shared
logic being deduplicated.
The base of a state system for the editor has been created as well,
laying a good path for further organization improvements. Because of
this, the entire editor no longer gets drawn underneath the menus,
except for a few pieces which I haven't extracted yet. Either way,
this should be good for performance, if that was a concern.
It turns out this texture is only used as a temporary texture to draw
the screen with an offset before rendering it to the output target.
I thought it was used for drawing the map menu animation, but that was
only true of `tempBuffer`, and is no longer true of the new render
system.
The style we have here is that functions with no arguments are to have
explicit `void` arguments, even though this doesn't apply in C++,
because it does apply in C.
Unfortunately, some have slipped through the cracks. This commit fixes
them.
Because of how `blackout` works, screen shaking must clear the gameplay
buffer. `blackout` simply pauses rendering, so if the gameplay buffer
gets cleared, then the screen will just be black, otherwise it'll look
like the game is "frozen". VVVVVV only uses `blackout` during screen
shaking, so it works as intended. However, when reimplementing this
behavior in the move to using the SDL_Renderer system, I failed to
notice that since my implementation always clears the gameplay buffer
when shaking, if you open the menu during a shake, instead of seeing
gameplay during the transition animation, you only see black. This has
been fixed with a simple `game.blackout` check before clearing the
gameplay buffer.
See the previous two commits, a lot of the time we don't need
std::string objects to be passed to these functions because we already
have C strings.
Commit 1/3: font::print_wrap
Commit 2/3: font::print
-> Commit 3/3: font::len
This removes memory churn caused by using analogue mode.
The surfaces are only allocated if analogue mode is turned on, and kept
after they are initialized. Otherwise, if analogue mode is never turned
on (which will be the case for the vast majority of the time the game is
played), then no extra memory is used.
Drawing a texture onto itself seems to produce issues on Metal.
To fix this, use a temporary texture instead, that then gets drawn onto
the original texture.
Fixes#927.
For consistency, since they are created in create_buffers as well. I
checked with Valgrind (which is very noisy on Wayland, it turns out),
but I didn't see anything about them not being freed. It doesn't hurt to
use VVV_freefunc here anyway, though, since it does a NULL check and
nulls the pointer afterwards, which should prevent double-freeing and
use-after-frees.
I'm going to soon be creating an actually temporary texture, so having
two textures named "temp" would get confusing. This is also a good
chance to correct the name of this texture, because it's not really
temporary, but it's used for map menu animation rendering.
There used to be two ways of fading in/out text in VVVVVV:
- Local code that modifies the R, G and B values of the text
- Keeping the RGB values the same and using the alpha channel
The latter approach is only used once, for [Press ENTER to return to
editor]. The former approach causes problems with colored (button)
glyphs: there's no way for the print function to tell from the RGB
values whether a color is "full Viridian-cyan" or "Viridian-cyan faded
out 50%", so I added the flag PR_COLORGLYPH_BRI(value) to tell the
print function that the color brightness is reduced to match the
brightness of colored glyphs to the brightness of the rest of the text.
However, there were already plans to make the single use of alpha
consistent with the rest of the game and the style, so PR_ALPHA(value)
could be removed, as well as the bit signifying whether the brightness
or alpha value is used. For the editor text, I simply copied the "Press
{button} to teleport" behavior of hiding the text completely if it
becomes darker than 100/255.
Another simplification is to make the print function handle not just
the brightness of the color glyphs while local code handled the
brightness of the normal text color, but to make the print function
handle both. That way, the callsite can simply pass in the full colors
and the brightness flag, and the flag name can be made a lot simpler as
well: PR_BRIGHTNESS(value).
"by {author}" is a string that will cause a lot of localization-related
problems, which then become much worse when different languages and
levels can also need different fonts:
- If the author name is set to something in English instead of a name,
then it'll come out a bit weird if your VVVVVV is set to a different
language: "de various people", "por various people", etc. It's the
same problem with Discord bots completing "playing" or "watching" in
their statuses.
- Translators can't always fit "by" in two letters, and level creators
have understandably always assumed, and will continue to assume, that
"by" is two letters. So if you have your VVVVVV set to a language that
translates "by" as something long, then:
| by Various People and Others |
...may suddenly show up as something like:
|thorer Various People and Othe|
- "by" and author may need mutually incompatible fonts. For example, a
Japanese level in a Korean VVVVVV needs to be displayed with "by" in
Korean characters and the author name with Japanese characters, which
would need some very special code since languages may want to add
text both before and after the name.
- It's very possible that some languages can't translate "by" without
knowing the gender of the name, and I know some languages even
inflect names in really interesting ways (adding and even replacing
letters in first names, surnames, and anything in between, depending
on gender and what else is in the sentence).
So to solve all of this, the "by" is now replaced by a 10x10 face from
sprites.png, like a :viridian: emote. See it as a kind of avatar next
to a username, to clarify and assert that this line is for the author's
name. It should be a fairly obvious/recognizable icon, it fixes all the
above problems, and it's a bonus that we now have more happy faces in
VVVVVV.
They need to know how wide the text is going to be in a particular
font, so font::string_wordwrap and font::string_wordwrap_balanced now
take a flags argument like all the printing and dimensions-getting
functions. next_wrap and next_wrap_s take a Font* now, they're internal
to Font.cpp so they can take a Font and avoid double flag-parsing. But
if any non-Font.cpp code needs next_wrap/next_wrap_s in the future, I'd
just make a public wrapper that takes a uint32_t flags and passes the
Font* to the internal functions.
The last two deprecated functions are:
- Graphics::Print
- Graphics::PrintWrap
These are used a lot, but they're relatively easy to replace, since the
only flag I probably have to immediately worry about is PR_CEN. I do
often need to add PR_FONT_* flags but I don't need to add any
PR_2X/PR_3X/PR_4X anymore.
Only three deprecated functions remain:
- Graphics::Print
- Graphics::PrintWrap
- Graphics::bigprint
I also fixed multiline transparent textboxes having their outlines
overlap the text itself, and fixed textboxclass::padtowidth assuming
glyph widths of 8 (it made the hints at the start of intermission 1
run offscreen for example)
Only four deprecated functions remain:
- Graphics::Print
- Graphics::PrintWrap
- Graphics::bigprint
- Graphics::bprint
Graphics::bprint is the least-used one of them, and after that, the
other functions are used a LOT, but it'll be a lot faster to go through
them, since I have less and less flags to worry about. I'll probably
start using Vim macros again like I did for loc::gettext()ing strings,
or maybe I'll automate this completely.
I migrated all of them to font::print, so they can now be removed.
Six deprecated print functions left! (Of which some are used a whole
lot, it's simpler if the lesser-used ones are gone first.)
