When an activity zone is spawned through the
use of `createactivityzone`, and `i` is 35,
then it'll change the activity zone text to
"Press ENTER to interact".
On Emscripten, SDL_Delay is implemented as a busy loop. In addition,
everything happens on a single thread. This effectively means that
you have to let Emscripten manage the main loop, since if you do it
yourself the browser will just be frozen.
Otherwise, the new arguments to destroy(), which are 'moving' and
'disappear', would be thrown away by the simplified parser. Let's create
less work for ourselves to do and simply not have a hardcoded list of
allowed arguments for destroy() in the parser.
destroy(platforms) has been bugged since 2.0. The problem with it is
that it removes the platform entity, but doesn't remove its block. This
results in essentially turning the platorm invisible and stopping it
from moving.
This error should be fixed, but some levels (including my own) rely on
the invisible platform trick. So instead, the fixed version will be
implemented under a different name, destroy(moving).
There's also another problem with destroy(platforms), which is that the
name is misleading and it doesn't additionally destroy disappearing
platforms. I would also fix this, but in order to not run the risk of
breakage, it will have to be implemented under a different name, too. So
this will be destroy(disappear). As an added benefit, it's also more
granular to have platform-destroying functions under different names
than it is to consolidate them under the same name.
When I added the two-frame delay fix, I didn't realize that Game had a
roomchange variable that was being used as a temporary variable here.
Now that it's fully spelled out and obvious (just look at the top of
gamelogic()), I realize that the variable exists and is being used, and
other readers will realize it's being used too - so now that I know it
exists, I can axe the screen_transition variable I added in favor of
using roomchange instead.
The purpose of this variable was to keep track of if gamelogic() called
map.gotoroom() at any point during its execution. So map.gotoroom()
always unconditionally set it to true, and then gamelogic() would check
it later.
Well, there's no need to put that in a global variable and do it like
that! It makes it less clear when you do that.
So what I've done instead is made a temporary macro wrapper around
map.gotoroom() that also sets roomchange to true. I've also made it so
any attempt to use map.gotoroom() directly results in failure (and since
then using map.gotoroom() in the wrapper macro would also fail, I've had
to make a gotoroom wrapper function around map.gotoroom() so the wrapper
macro itself doesn't fail).
This is a temporary vector that only gets used in mapclass::gotoroom().
It's always guaranteed to be cleared, so it's safe to move it off.
I'm fine with using references here because, like, it's a C++ STL vector
anyway - when we switch away from the STL (which is a precondition for
moving to C), we'll be passing around raw pointers here instead, and
won't be using references here anyway.
This is a temporary variable that doesn't need to be on Game. It is
guaranteed to be initialized every time mapclass::gotoroom() gets
called, so it's safe to move it off.
Enemy/platform bounds are intended to not be drawn if they cover the
whole screen, since that's what their default bounds are.
However, the code inadvertently made it so if ANY of the bounds touched
a screen edge, the bounds wouldn't be drawn. This is because the
conditionals used "and"s instead of "or"s. The proper way to write the
positive conditional is "x1 is 0 and y1 is 0 and x2 is 320 and y2 is
240", and when you invert that conditional, you need to also invert all
"and"s to be "or"s. This is not the first time that the game developers
failed to properly negate conjunctional statements...
This is to make it so RNG is deterministic when played back with the
same inputs in a libTAS movie even if screen effects or backgrounds are
disabled.
That way, Gravitron RNG is on its own system (seeded in hardreset()),
separate from the constant fRandom() calls that go to visual systems and
don't do anything of actual consequence.
The seed is based off of SDL_GetTicks(), so RTA runners don't get the
same Gravitron RNG every time. This also paves the way for a future
in-built input-based recording system, which now only has to save the
seed for a given recording in order for it to play back
deterministically.
Otherwise, levels could leave stale arguments in the array, and then the
behavior of another level loaded right after might end up being
different because of that.
This is done for consistency with Terry's patrons, which are sorted by
first name and not last.
Also some people go with their usernames and so don't have a last name
to speak of, which ended up being pretty weird.
Kai is my last name. Elizabeth is my middle name. I went with my middle
name as last name for a while before figuring out what I wanted my last
name to be.
Third time's the charm.
The fundamental problem with the previous attempts was that they ended
up saying arguments existed due to stale `words` anyway. So to actually
know if an argument exists or not, we need to assign to `argexists` _as_
we parse the line.
And make sure to take care of that last argument too.
Also I thoroughly tested this this time around. I'm done pulling my hair
out over this.
Ever since tilesheets got expanded, custom levels could use as many
tiles as they wanted, as long as it fit under the 32-bit signed integer
limit.
Until 6c85fae339 happened and they were
reduced to 32,767 tiles.
So I'm being generous again and changing the type of the contents array
(in mapclass and editorclass) back to int. This won't affect the
existing tilemaps of the main game, they'll still stay short arrays. But
it means level makers can use 2 billion tiles once again.
This lets users place down tiles above 1199 in Direct Mode, if their
tilesheet has more than 1200 tiles.
I don't like the copy-pasted code here but it'll have to make do.
If you use Lab tilecol 6, you get the rainbow background. However, this
is unintended, because the associated autotiling is... not very good.
To combat that, Ved disallows using the Lab rainbow background outside
of Direct Mode. We will follow Ved here and only allow switching to the
rainbow background if you're in Direct Mode. Also make sure if someone
is disabling Direct Mode with the rainbow background that it gets reset
properly.
The main game used a set of copy-pasted code to set the music of each
area. There WAS some redundancy built-in, but only three rooms in each
direction from the entrance of a zone.
Given this, it's completely possible for players to mismatch the music
of the area and level. In fact, it's easy to do it even on accident,
especially since 2.3 now lets you quicksave and quit during cutscenes.
Just play a cutscene that has Pause music, then quicksave, quit, and
reload. Also some other accidental ways that I've forgotten about.
To fix this, I've done what mapclass has and made an areamap. Except for
music. This map is the map of the track number of every single room,
except for three special cases: -1 for do nothing and don't change music
(usually because multiple different tracks can be played in this room),
-2 for Tower music (needs to be track 2 or 9 depending on Flip Mode),
and -3 for the start of Space Station 2 (track 1 in time trials, track 4
otherwise).
I've thoroughly tested this areamap by playing through the game and
entering every single room. Additionally I've also thoroughly tested all
special cases (entering the Ship through the teleporter or main
entrance, using the Ship's jukebox, the Tower in Flip Mode and regular
mode, and the start of Space Station 2 in time trial and in regular
mode).
Closes#449.
2.3 has a regression where if you move back and forth between a zone,
you can get the wrong music playing in a zone. An example is the
Overworld and Lab. Just walk in to the Lab and immediately walk back
out, and you'll get Potential for Anything playing in the Overworld.
This regression was caused by facb079b35.
That commit removed assigning -1 to currentsong when a fadeout was
called.
Basically, the previous behavior was: currentsong is 4, we enter Lab and
nicechange gets queued to 3 but currentsong gets set to -1, then going
back nicechange gets queued to 4 again.
However, if we don't assign -1, then going back will keep nicechange at
3. Why? Because niceplay() checks for currentsong before assigning
nicechange. If currentsong is still the same then it doesn't assign
nicechange.
To fix this, just always unconditionally assign nicechange.
If spawned as a custom enemy (createentity entry 56), or spawned outside
of the rooms they spawn in in the main game, they will repeatedly clone
themselves every frame, which profusely leaks memory. In fact it quickly
causes a crash in 2.2 and previous, but 2.3 fixes that crash, so it just
keeps spawning enemies endlessly, which eventually lags the game, and
eventually can out-of-memory your system (bad!).
The problem is those movement types rely on entclass::setenemyroom() to
change their `behave` to be 11 or 13. Else, the new entity created will
still have `behave` 10 or 12, which will create ANOTHER entity in the
same way, and so on, and so forth.
So to fix this, just make it so if an enemy is still `behave` 10 or 12
by the end, then, just set it to -1. That way it'll stay still and won't
cause any harm.
I considered setting the `behave` to 11 or 13 respectively, but, that's
probably going farther than just fixing a memory leak, and anyways, it's
not that much useful for me as a custom level maker, and the entities
spawned aren't really controllable.
In order to let callers provide their OWN callback functions through the
callback function WE provide to PhysFS, we casted the function pointer
to a void pointer.
Unfortunately, this is apparently undefined behavior... if your compiler
doesn't have an extension for it. And most compilers on most
architectures do. (In fact compilers on POSIX systems most certainly
have it due to dlsym() returning a void* which could actually be a
pointer to a function sometimes.)
But imo, it's better to be safe than sorry in this regard. Especially
when given GCC's approach to optimizing int + 100 > int (spoilers: they
remove it entirely! It's faster, but also broken!).
I've decided to wrap it in a struct. And as a nice side effect, if we
ever need more data to be passed through... well we already have this
struct.
Technically, it's also standards-compliant to cast a _pointer to_ a
function pointer to a void pointer. But that extra layer of pointer
indirection would get real confusing to conceptualize real fast (or at
least is more confusing than just putting it in a struct).
Since you've been able to resume music stopped by stopmusic() with
resumemusic(), if a track was stopped by stopmusic(), the unfocus pause
itself would end up resuming the track when regaining focus.
The solution is to simply check for if music.currentsong is -1 or not.
So, platv is a room property that controls the speed of custom entity
platforms in the room (unless, of course, they're created with
createentity). Problem is, this is how 2.2-and-previous coding standards
were:
ed.level[game.roomx-100+((game.roomy-100)*ed.maxwidth)]
Overly long, verbose, not entirely clear unless you already know what it
means? Copy-pasted over and over due to all of the above? Surely a
recipe for not making any coding errors!
Ironically enough, copy-pasting is basically the best approach here
(short of refactoring the whole thing, like I did in
945d5f244a), since if you don't ACTUALLY
copy-paste and just re-type it on your own, you'll end up making more
mistakes. Like what happened here:
ed.level[game.roomx-100+((game.roomy-100)*ed.mapwidth)].platv
Do you see the mistake...? Yeah, mapwidth (with a P) instead of maxwidth
(with an X). You'd have to look closely to find it.
So what does this mean for platv? Well, it means that it multiples the
y-coordinate of the room by the map width instead of the max width (20),
like every other room property. So that means if your map width is less
than 20, like say, map width 10, the platv value for (2,2) will be
stored in (2,1)'s room properties instead of (2,2)'s. Because if you go
off of map width, the room index for (2,2) is 2 + 2 * 10 = 22, but if
you go off of max width, the room index for (2,1) is 2 + 1 * 20 = 22.
Now this wouldn't be bad, except for another 2.2-and-previous
standard... kind of just not exposing things directly to the end user.
Whether that's simply not documenting something (as in the case of
ifwarp and warpdir, which by all measures were completely intended to be
used in custom levels but just simply were never known properly until I
discovered how to use them in 2019), or in this case, not giving any way
for the user to fiddle with platv from the in-game editor. Because if
there was a way to do that, and someone decided to test to see if platv
worked okay, they would discover something was up.
So... since I refactored room properties in
945d5f244a, I kind of broke platv by
fixing it. Now levels that relied on platv being the broken way don't
work.
How do I fix it, and thus break it again? Well, I'll do what I did for
scripts - handle the scrambling when reading and writing the level, and
keep things sane at least internally.
Thus: editorclass::load() will unscramble platv data in the right way,
and editorclass::save() will re-scramble platv in the right way too.
To match the option to nuke all main game save data, there is also now
an option to nuke all custom level save data separately (which is just
all custom level quicksaves, along with stars for level completion). It
has its own confirmation menu too. It does not delete any levels from
the levels folder.
Custom level quicksaves are NOT affected by the clear data menu, so the
player should be able to delete quicksaves this way. The quicksave
confirmation menu now has an extra option to delete the save (and that
option also has its own confirmation menu before deleting).
This error case can happen, but if it does, non-console users get an
ERROR page with no further information. So use setLevelDirError if this
failure mode happens. And Menu::errorloadinglevel needs to be changed to
accomodate that.
Not sure why the original implementation decided to do things this way
instead of snprintf'ing a path to the .zip itself. Otherwise, if the
level is from data.zip, PHYSFS_getRealDir() will return the path of
data.zip, which then fails to mount for separate reasons.
Since createentity() started accepting p1/p2/p3/p4 arguments, it now
unconditionally passes in whatever arguments were present there
previously, when there weren't any before.
This can lead to unexpected behavior when selectively using and then
omitting p1/p2/p3/p4 arguments.
Also, plenty of existing levels already only use the 5-argument version
of createentity(). And createcrewman() can take up to 6 arguments at
once. It's not far-fetched that an existing level could createentity()
right after doing a 6-argument createcrewman(), which would lead to a
different behavior than in 2.2 and previous.
So instead, instead of checking if `words[index]` is an empty string (it
only sets the string to be empty if there are enough argument separators
on the line), ACTUALLY check if it's empty. I've added a static array
(no need for it to be exported) that keeps track of this. createentity()
now checks for that instead of `words`.
It's possible to get one page of levels by removing all the built-ins,
either by removing them directly from data.zip or by putting files with
the same filenames as them in your level folder that don't contain
nothing.
And hey, there's already a check for if no levels exist at all, so why
not check for this too?
Previously, you would only get the trinket completion star if you got
the exact same amount of trinkets as there are custom entity trinkets in
the level file. But if you got more (say, if the level spawned extra
"bonus trinkets"), you wouldn't be able to get the star.
This is true of the custom crewmate case as well, but I've decided to
not change that case, because there are still downsides to the resulting
behavior and it's better to just leave it alone because it's rare for it
to happen anyways.
Since custom levels have gained the functionality to show trinkets on
the minimap, it's nice to just save the showtrinkets variable directly
to the save file, without having to make level makers handle it
themselves.
If you have unfocus pause off, and unfocus audio pause off, then this command will go into effect.
When it's set to on, the audio will pause when you unfocus the game. When it's set to off, the
audio will not. This is different from the setting, and gets saved to the save file.
If a zip file is improperly structured, a message will be displayed when
the player loads the level list.
This will only display the last-displayed improper zip, because there
only needs to be one displayed at a time. Also because doing anything
more would most likely require heap allocation, and I don't want to do
that.
This will wrap text on-the-fly, since I will be introducing text that
needs to be wrapped whose length we can't know in advance. (Or we can,
but, that'd be stupid.)
I took the algorithm from Dav999's localization branch, but it's not
like it's a complicated algorithm in the first place. Plus I think it
actually handles words that get too long to fit on a single line better
than his localization branch. The only difference is that I removed all
the STL, and made it more memory efficient (unlike his localization
branch, it does not copy the entire string to make a version with
newline separator characters).
This macro needs to be used because Clang is stupid and doesn't let you
use /* fallthrough */ comments like GCC does. However, if GCC is too old
(as is the case on CentOS 7), then it won't recognize __has_attribute
either.
Some people prefer the 2.2 behavior where unfocusing pauses the game,
but the music still plays. One such person is Trinket9 on the VVVVVV
Discord server, who wanted it that way.
The reason audio pausing was added in the first place was to prevent
desyncing music in levels with cutscenes that synced to music. Rather
than reverting it, let's add this option instead.
Similar to disabling the elephant flashiness, at least one
photosensitive person has told me the flashy color animation makes their
eyes kind of hurt a little bit. Also it screws up the compression really
badly when they record (especially the green noisy tiles!).
The colors will still cycle, but the individual animations within each
color will be completely static.
It's quite rude to close the game. Especially if the user does not use
the console. They won't know why the game closed.
Instead, just return -1. All usages of font_idx() should be and are
bounds checked anyways. This will result in missing characters, but,
it's not like the characters had a font image in the first place,
otherwise we wouldn't be here. And if the user sees a bunch of
characters missing in their font, they'll probably work out what the
problem is even without having a console. And it's still far better than
abruptly closing the game.
And use WHINE_ONCE to prevent spamming the console.
Let's say you have a zip named LEVELNAME.zip, but the only .vvvvvv file
it contains is NOTLEVELNAME.vvvvvv. This zip would end up printing both
the 'LEVELNAME.vvvvvv is missing' and 'It has .vvvvvv file(s) other than
LEVELNAME.vvvvvv' messages, even though we already know there's
something wrong with the zip, and the 'other level files' message is
redundant, since in this case the problem here is simply just the
.vvvvvv file being named the wrong way.
The 'other level files' message is only intended to be printed when
LEVELNAME.vvvvvv *does* exist, but there's additional .vvvvvv files in
the zip on top of that, so don't print this message if LEVELNAME.vvvvvv
exists.
Since colors going into FillRect() need to be in BGR format, we need to
use getBGR instead. (Well, actually, it gets passed in RGB, but then at
some point the order gets switched around, and, really, this game's
masks are all over the place, I'm going to fix that in 2.4.)
This can happen if you select an option in a menu that (A) returns to
the previous menu and (B) saves settings. If the settings save fails,
this will create another menu on the same frame that cycles the tower BG
after it's already been cycled for that frame. Examples are the slowdown
and glitchrunner menus.
I could fix this by creating a new function that copy-pastes all of
Game::savestatsandsettings_menu() except for the map.nexttowercolour()
at the end. But that's copy-pasting code.
Instead what I've done is added a variable to signal if the color has
already been cycled this frame, so we don't cycle it again. This also
covers cases of possible double-cycling in the future as well.
This is because the fade delay did not last long enough.
I was under the mistaken impression that the fade animation lasts for 15
frames. However, this does not account for the fact that the offset of
each fade bar is dependent on RNG, and the worst case scenario is that
they have an offset of 96 pixels (in the opposite direction of the
fade).
The actual fade animation timer accounts for the worst case scenario, so
the fade animation actually lasts for (320 pixels plus 96 pixels is 416
pixels, 416 pixels divided by 24 pixels per frame equals 17.333...
frames, but since the actual timer keeps adding/subtracting 24 pixels
per frame until it passes the 416-pixel threshold, that gets rounded up
to...) 18 frames.
And an extra frame to make it so deltaframe interpolation doesn't
suddenly stop on the last deltaframes before the screen is completely
black.
I also need to draw the screen black on the map screen when glitchrunner
mode is off, if there's a fadeout going on. Else that would introduce
yet another frame flicker.
This fixes a bug where the player would always be facing right if they
were loading in for the first time. This essentially made them always
ignore the facing direction set in the save file if the facing direction
was leftwards.
The problem is facing direction only gets set in map.resetplayer(), but
if loading in for the first time, that path is never taken (unless you
are loading a main game quicksave that's inside a tower). The solution
is to always reset the player, even after creating them for the first
time.
This fixes being able to re-trigger the fadeout while a fadeout is
already happening. It also fixes being able to enter playtesting during
the fadeout, which means the level now has a fadeout you normally can't
do in actual gameplay.
There's nothing to interpolate. It moves at one pixel per frame. And
interpolating sometimes results in the box being short by 1 pixel to
cover the whole screen on deltaframes, so if you stand on the right edge
of the screen and have a translucent sprite, it will quickly draw over
itself many times, and it looks glitchy. This commit fixes that bug.
Previously, turning glitchrunner mode on essentially locked you to
emulating 2.0, and turning it off just meant normal 2.3 behavior. But
what if you wanted 2.2 behavior instead? Well, that's what I had to ask
when a TAS of mine would desync in 2.3 because of the two-frame delay
fix (glitchrunner off), but would also desync because of 2.0 warp lines
(glitchrunner on).
What I've done is made it so there are three states to glitchrunner mode
now: 2.0 (previously just the "on" state), 2.2 (previously a state you
couldn't use), and "off". Furthermore, I made it an enum, so in case
future versions of the game patch out more glitches, we can add them to
the enum (and the only other thing we have to update is a lookup table
in GlitchrunnerMode.c). Also, 2.2 glitches exist in 2.0, so you'll want
to use GlitchrunnerMode_less_than_or_equal() to check glitchrunner
version.
Two problems: the fRandom() range was from 0..36, but that's 37
characters, not 36. And the check to sort the lower 26 values into the
Latin alphabet used a 'lesser-than-or-equal-to 26' check, even though
that checks for the range of values of 0..26, which is 27 letters, even
though the alphabet only has 26 letters. So just drop the equals sign
from that check.
It was checking for .vvv-mnt-temp-XXXXXX/LEVELNAME.vvvvvv instead of
LEVELNAME.vvvvvv. When PhysFS enumerates the folder, it only gives us
LEVELNAME.vvvvvv, and not .vvv-mnt-temp-XXXXXX/LEVELNAME.vvvvvv.
This fixes a regression that desyncs my Nova TAS after re-removing the
1-frame input delay.
Quick stopping is simply holding left/right but for less than 5 frames.
Viridian doesn't decelerate when you let go and they immediately stop in
place. (The code calls this tapping, but "quick stopping" is a better
name because you can immediately counter-strafe to stop yourself from
decelrating in the first place, and that works because of this same
code.)
So, the sequence of events in 2.2 and previous looks like this:
- gameinput()
- If quick stopping, set vx to 0
- gamerender()
- Change drawframe depending on vx
- gamelogic()
- Use drawframe for collision (whyyyyyyyyyyyyyyyyyyyyyyyyyyy)
And now (ignoring the intermediate period where the whole loop order was
wrong), the sequence of events in 2.3 looks like this:
- gamerenderfixed()
- Change drawframe depending on vx
- gamerender()
- gameinput()
- If quick stopping, set vx to 0
- gamelogic()
- Use drawframe for collision (my mind has become numb to pain)
So, this means that all the player movement stuff is completely the
same. Except their drawframe is going to be different.
Unfortunately, I had overlooked that gameinput() sets vx and that
animateentities() (in gamerenderfixed()) checks vx. Although, to be
fair, it's a pretty dumb decision to make collision detection be based
on the actual sprites' pixels themselves, instead of a hitbox, in the
first place, so you'd expect THAT to be the end of the dumb parade. Or
maybe you shouldn't, I don't know.
So, what's the solution?
What I've done here is added duplicates of framedelay, drawframe, and
walkingframe, for collision use only. They get updated in gamelogic(),
after gameinput(), which is after when vx could be set to 0.
I've kept the original framedelay, drawframe, and walkingframe around,
to keep the same visuals as closely as possible.
However, due to the removal of the input delay, whenever you quick stop,
your sprite will be wrong for just 1 frame - because when you let go of
the direction key, the game will set your vx to 0 and the logical
drawframe will update to reflect that, but the previous frame cannot
know in advance that you'll release the key on the next frame, and so
the visual drawframe will assume that you keep holding the key.
Whereas in 2.2 and below, when you release a direction key, the player's
position will only update to reflect that on the next frame, but the
current frame can immediately recognize that and update the drawframe
now, instead of retconning it later.
Basically the visual drawframe assumes that you keep holding the key,
and if you don't, then it takes on the value of the collision drawframe
anyway, so it's okay. And it's only visual, anyway - the collision
drawframe of the next frame (when you release the key) will be the same
as the drawframe of the frame you release the key in 2.2 and below.
But I really don't care to try and fix this for if you re-enable the
input delay because it's minor and it'd be more complicated.
In the past, people have reported having glitched levels where they
can't get the trinket star or can't complete the level because the
number of trinkets or crewmates is one higher than what can be obtained
in the level.
How did this happen? Well, it turns out that if you place an entity, and
then resize the level to be smaller, that entity still exists. This is
inconsequential for most entities, but if the entity is a trinket or
crewmate, that entity is still counted towards the number of trinkets or
crewmates in the level.
One fix would be to just remove entities whenever the level is
downsized, but then if someone accidentally downsizes the level and
wants to go back, that entity will be gone. Plus, it would be
inconsistent with tiles, because tiles don't get removed when you
downsize the level. Also, it wouldn't fix existing levels where people
have managed to place trinkets or crewmates out of bounds.
So instead, ed.numtrinkets() and ed.numcrewmates() should simply ignore
trinkets and crewmates that are outside the playable area. That way,
levels with glitched trinkets and crewmates can still be completed, and
can still be completed with the trinket star.
This fixes a regression where you're unable to activate activity zones
in in-editor playtesting if your interact button is not separate from
the map button.
When I originally did #743, I didn't have an option to set the bind to
be non-separate, so I removed this logic without adding a
game.separate_interact check. But when I added the option, I overlooked
this code, and so this regression happened. Whoops.
Not every music path will trip the quick_fade bool that resets the timer to
500ms, so we need to do this as soon as it's asked of us. This fixes the fade
when quitting to the main menu.
Fixes#764
Without this you end up with two problems:
- Fades will start past their fade time, causing it to just not fade at all
- Fades will start in the middle of their fade time, causing dramatic changes
in volume that are unintentional
The fade system already preserves the volume that music is playing during a
previous fade, so we can always reset the timer and get a good result.
Part of #764
This fixes one of two desyncs in my Nova TAS.
The problem is that by adding two frames of edge-flipping to vertically
moving platforms, Viridian's framedelay is updated for one extra frame
after they step off of a vertically-moving platform. This then messes up
Viridian's drawframe for the rest of the TAS until they die in a
drawframe-sensitive trick.
The solution here is to only set the visual onroof/onground to 1
instead. The logical onroof/onground is still 2, so players still have
two frames of edge-flipping off of vertically-moving platforms - it just
won't really look like it (not that you could easily tell anyway).
- use fseeko and ftello like FreeBSD in tinyxml2
- use current directory as basePath if NULL (OpenBSD doesn't actually support this feature it is disabled via a patch in their ports)
In order to help players spot the difference between outlined text and
non-outlined text, we now outline the text outline text itself (if text
outline is enabled, of course). But drawing the outline alone doesn't
stand out enough, so we have to draw a solid backing against the text as
well, in order to properly show the contrast.
This fixes a regression where you're able to start flipped by restarting
and then holding ACTION.
This happens because when the game resets all variables, it turns
hascontrol back on (because of hardreset()). However, this is handled in
the input function, and it's handled before player input is handled, so
the player is able to get 1 frame of being able to flip after a time
trial resets.
Why didn't this happen in 2.2? Because resetplayer() in 2.2 would set
lifeseq to 10, as if the player had died. However, this is inconsistent,
because loading in to the game for the first time would not result in a
lifeseq of 10. So, in 2.2, restarting the time trial would remove that 1
frame of being able to flip because of lifeseq, while 2.3 doesn't set
lifeseq because the player hasn't died.
I could have fixed this by setting lifeseq in the time trial restart
code, but I decided to just set hascontrol to false instead.
Fixes#770.
In earlier 2.3, if the roomname was empty, Dimension VVVVVV was used
instead. However, instead of doing that, it's better to just use the
hiddenname instead. Both because it's less hardcoded, and some rooms
have hidden names that aren't Dimension VVVVVV.
This makes the text much more readable against certain backgrounds (if
you have text outline enabled), especially against the Warp Zone
background (when you start in "This is how it is").
If you enter the Secret Lab from the title screen, all rooms will be
explored. However, if you enter the Secret Lab via the Secret Lab
entrance cutscene (epilogue), not all rooms will be explored, which is
inconsistent.
To do this, just do an SDL_memset() for the entersecretlab script
command.
SDL_memset() conveys intent better and is snappier than using a
for-loop. Also, using SDL_memset() to explore all rooms is more
future-proof, in case the size of map.explored were to change in the
future, and it's more conducive to optimization.
However, the `i` variable has to be explicitly set because it was
previously used here, but it's much better that it's explicitly set here
rather than being subtlely hidden in the inner for-loop initialization.
This is more future-proofing than anything else. The position of the
indicators is just the x-position of the gravitron square divided by 10,
but the gravitron squares will always only ever move at 7 pixels per
frame - so the distance an indicator travels on each frame will only
ever be at most 1 pixel. But just in case in the future gravitron
squares become faster than 10 pixels per frame, their indicators will be
interpolated as well.
When rollcredits is ran during in-editor playtesting, all unsaved data
is lost. To prevent this, just return to the editor if rollcredits is
ran, with a note saying "Rolled credits".
The text box drawn at the bottom of the map screen isn't wide enough, so
it's possible to see the corners on the right side of the text box if
you have custom graphics like I do.
The solution is to increase the width of the text box by one tile.
The game automatically writes settings to disk after any other setting
is changed, so it should do the same whenever the user changes
controller keybinds.
For consistency, the Viridian squeak will now play whenever you start
editing a level description field, or finish editing it (either by
pressing Esc or Enter).
If a level zip is named LEVELNAME.zip, the level file inside it must
also be named LEVELNAME.vvvvvv, else custom assets won't work.
This is because when we mount the zip file, we simply add
LEVELNAME.vvvvvv to the levels directory. Then whenever we load
LEVELNAME.vvvvvv, we look at the filename, remove the extension, and
look for the assets inside the zip of the same name, LEVELNAME.zip.
As a result, if someone were to make a level zip with assets but
mismatch the filename, the assets wouldn't load. Furthermore, if someone
were to add extra levels in the same zip, they wouldn't have any assets
load for them as well, which could be confusing.
To make things crystal-clear to the user, we now filter out any zips
that have incorrect structures like that, and print a message to the
terminal. Unfortunately nothing gets shown for non-terminal users, but
at least doing this and filtering out the zips is less confusing than
letting them through but with the issues mentioned above.
FILESYSTEM_mountAssets() has a big comment describing the magic numbers
needed to grab FILENAME from a string that looks like
"levels/FILENAME.vvvvvv".
Instead of doing that (and having to write a comment every time the
similar happens), I've written a macro (and helper function) instead
that does the same thing, but clearly conveys the intent.
I mean, just look at the diff. Using VVV_between() is much better than
having to read that comment, and the corresponding SDL_strlcpy().
This is so it can be reused without having to copy-paste.
generateBase36() is guaranateed to completely initialize and
null-terminate the buffer that is passed in.
This fixes a bug where the player's y-position would be incorrect if
they loaded a save that was on a conveyor and it was their first time
loading in since the game was opened.
This is because on the first load, the game creates a new player entity,
but on subsequent loads, the game re-uses the player entity. Subsequent
loads use mapclass::resetplayer(), which already has the newxp/newyp
fix, but as for the first time, the game does not set newxp/newyp.
So just set newxp/newyp, like in mapclass::resetplayer().
Upon further discussion it was decided to keep the soundtrack as originally
shipped, instead of changing it after the fact.
This reverts commit cf51379097.
There is a pattern in the Super Gravitron that is meant to "staircase",
similar to the Gravitron in Intermission 2. Something like:
[]
[]
[]
[] []
[] []
Unfortunately, due to an oversight, this pattern can only ever produce 1
square or 4 squares, which look out of place.
Both gravitrons are state machines (of course). States 20 and 21 in the
Super Gravitron are this staircase pattern (state 20 spawns the squares
on the left, state 21 spawns the squares on the right).
The only way states 20 and 21 can be reached is through state 1, and the
only way state 1 can be reached is through state 3. The only way state 3
can be reached is through states 28, 29, 30, and 31.
In states 20 and 21, the variable used to keep track of the amount of
squares spawned is swnstate4. However, states 28, 29, 30, and 31 all end
up using swnstate4, and at the end of states 28 and 29, swnstate4 will
be 7, and at the end of states 30 and 31, swnstate4 will be 3. This
means if we go to states 20 and 21 after coming from states 28 and 29,
we will only get 1 square, and if we go to states 20 and 21 after coming
from states 30 and 31, we will only get 4 squares.
This can be clearly filed under a failure to reset appropriate state.
What's the solution here? Just reset swnstate4 in state 3, so there will
be 7 squares, as intended. This also fixes the bug for state 22 as well,
which is affected in the same manner.
This fixes an oversight that could lead to confusion by the player.
showtargets is the variable that shows all unexplored teleporters on the
map as a question mark, so players know where to head to to make
progress. However, it previously was not directly saved to the main game
file. Instead, it would be set to true if flag 12 was turned on in the
save file.
How well does flag 12 correlate with showtargets?
Well, the script that turns on showtargets (bigopenworld and
bigopenworldskip) doesn't turn it on. Neither does completing Space
Station 1.
This flag is only turned on when the player activates Violet's activity
zone for the first time.
Therefore, it's entirely possible that a new player could complete Space
Station 1, then save their game, and come back to resume playing later.
When they do come back, the question marks that Violet told them about
won't show up on the minimap, and they'll be confused. They may not know
where to go.
And it is completely unintuitive for them to know that in order to get
the question marks to show up again, they have to not only talk to
Violet, but then save the game again, and reload the save. Especially
since the question marks only show up after you reload the save, and not
when you talk to Violet (because flag 12 is only a proxy for
showtargets, not the actual variable itself).
So what's the solution? Just save showtargets to the save file directly.
If you have invincibility enabled, the tower camera behavior is
inconsistent.
In ascending towers, you can "push" the camera upwards; however you
cannot push it downwards; at least it stays still when it comes up to
you if you stay still. In descending towers, the camera moves quicker
when you're at the bottom of the screen, but it's slower than your
falling speed and quickly loses sight of you; the camera can be pushed
upwards; unfortunately it also does a "bumping" motion if you're
standing still when the camera reaches you, which gets real annoying and
isn't particularly pleasant to look at.
There are two problems, so this does two fixes:
1. Pushing the camera now applies the appropriate counter-offset
depending on the direction of the tower. You can now push the camera
downwards in ascending towers.
2. To fix the "bumping" when the camera reaches you if you stand still,
there are now a 8-pixel-high "gray areas" at the top and bottom of
the screen where the camera simply won't move if you're in them.
Doing these camera offsets instead of simply canceling the movement if
the player is offscreen is a bit ugly... but it works for now.
This is a lot of copy-pasted code, but a little bit of copy-pasting
never hurt anyone...
The keybind to interact with activity zones and teleporters is now
separate from the keybind to open the map, or return to the editor from
in-editor playtesting, or restart a time trial. The keybind is now E,
and the default controller bind is X. No controller button prompts, but
the game didn't have controller button prompts anyways, so whatever.
Doing this now because if people's muscle memory are going to be broken
by not being able to spam the map keybind anymore, at least we can help
a bit by changing the keybind so they can keep spamming it - their
muscle memory is going to be broken anyways.
This option has to be enabled by going to the speedrunner menu options
and selecting "interact button". It is disabled by default.
All prompt text needs to be string-interpolated every time they are
drawn, because it is possible for people to change which interact button
they use in the middle of gameplay, via the in-game options.
Closes#736.
Colors in over-30-FPS mode shouldn't be updating every deltaframe;
mostly to ensure determinism between switching 30-mode and over-30 mode.
I'm going to overhaul RNG in 2.4 anyway, but right now I'm going to fix
this because I missed it.
The RNG of each special text box is stored in a temporary variable on
the text box itself, and only updated if the color uses it (hence the
big if-statement). Lots of code duplication, but this is acceptable for
now.
After the dimension destabilizes, the song that plays is Positive Force.
Which has already been played twice in the game at that point (first in
Tower, then in the Gravitron). Since Piercing the Sky is unused, why not
play a song that the player hasn't heard before? It would also be
musically fitting for the scenario.
The song gets played in two places - one for if you have cutscenes
enabled, and one for if you don't - so we just need to change both of
them.
I asked Terry in Discord DMs if he wanted this change and he approved of
it.
If you have completed No Death Mode, and entered the Master of the
Universe trophy room in the Secret Lab in over-30-FPS mode, it would
appear to start at one position before quickly zipping to another during
the deltaframes.
This is because it updates its position after the initial assignments of
lerpoldxp/lerpoldyp in entityclass::createentity().
Other entities do this too, and what's been done for them is to
copy-paste the lerpoldxp/lerpoldyp updates alongside the xp/yp updates.
However, instead of single-case patching this deltaframe glitch, I've
opted to fix ALL cases by simply moving the lerpoldxp/lerpoldyp
assignments to the end of the function, guaranteeing that all entities
that update their position after the initial assignment in the function
will not have any deltaframe glitches.
Of course, there's still the duplicate lerpoldxp/lerpoldyp updates in
entityclass::updateentities()... I'm not sure what to do about those.
If you had Flip Mode enabled when exiting from in-game options, the game
would flash the in-game options menu as flipped for 1 frame before
returning to the pause menu.
To fix this, just defer the Flip Mode variable assignment to be done at
the end of the frame.
This is a small quality-of-life fix in the same vein as allowing the
player to press Esc in the teleporter menu (which they weren't able to
do in 2.2, either).
This fixes the finalstretch tile shifting persisting if you return to
the main dimension and final_colormode isn't reset properly.
It's possible to do so in the main game by using a teleporter in
finalmode while having the Intermission 1 or 2 companion active.
For custom levels, level makers can make a setup that automatically
turns on finalstretch, goes to finalmode, and then returns to the main
dimension. The only thing being... as a level maker myself, this tile
shifting REALLY doesn't seem useful (and no one has ever used it because
the setup to do so hadn't really been found or documented until this
year). For one, the exact shift is randomized every time (there's an
fRandom() call to cycle the colors). For two, it goes away after the
player saves and reloads the level. And for three, it doesn't animate
like it does in finalmode (this is the biggest reason IMO).
Nevertheless, I've decided to keep support for this in custom levels, in
case someone in the future does want to use it and is okay with the
limitations.
There's a bit of inconsistency with how long each color lasts for during
final stretch. Initially, each color lasts for 40 frames, but when you
enter either of the minitowers, the color switches to lasting for 15
frames only. This is because a final_colorframe of 1 makes it go for 40
frames, but a final_colorframe of 2 makes it go for 15 frames - and
final_colorframe gets set to 2 whenever you enter a minitower.
This seems like an oversight because (1) final_colorframe doesn't affect
anything inside the minitower, (2) final_colorframe doesn't get saved to
the save file and always gets set to 1 if your save file has
finalstretch set to true, so saving and reloading will set the colors
back to 40 frames each, and (3) final_colorframe doesn't get set back to
1 when leaving the minitowers.
When you enter the Super Gravitron, you have to wait until the Super
Gravitron actually starts before being able to press Enter to return to
the Secret Lab. This is annoying if you just want to get back to the
Secret Lab. So, I've made it so the press-Enter-to-return functionality
is enabled from the moment that the Super Gravitron starts.
It turns out, despite the game attempting to prevent you from using
invincibility or slowdown in the Super Gravitron by simply preventing
you from entering the Secret Lab from the menu, it's still possible to
enter the Super Gravitron with it anyways. Just have invincibility or
slowdown (or both!) enabled, enter the game normally, and talk to
Victoria when you have 20 trinkets, to start the epilogue cutscene.
Yeah, that's a pretty big gaping hole right there...
It's also possible to do a trick that speedrunners use called
telejumping to the Secret Lab to bypass the invincibility/slowdown
check, too.
So rather than single-case patch both of these, I'm going to fix it as
generally as possible, by moving the invincibility/slowdown check to the
gamestate that starts the Super Gravitron, gamestate 9. If you have
invincibility/slowdown enabled, you immediately get sent back to the
Secret Lab. However, this check is ignored in custom levels, because
custom levels may want to use the Super Gravitron and let players have
invincibility/slowdown while doing so (and there are in fact custom
levels out in the wild that use the Super Gravitron; it was like one of
the first things done when people discovered internal scripting).
No message pops up when the game sends you back to the Secret Lab, but
no message popped up when the Secret Lab menu option was disabled
previously in the first place, so I haven't made anything WORSE, per se.
A nice effect of this is that you can have invincibility/slowdown
enabled and still be able to go to the Secret Lab from the menu. This is
useful if you just want to check your trophies and leave, without having
to go out of your way to disable invincibility/slowdown just to go
inside.
This factors out the slowdown and invincibility conditionals to a
function. This means less copy-pasted code, and it also conveys intent
(that we don't want to allow competitive options if we have either of
these cheats enabled).
This function isn't implemented in the header because then we would have
to include Map.h for map.invincibility, and transitive includes are
evil. Although, map.invincibility ought to be on Game instead (it was
only mapclass due to 2.2-and-previous argument passing), but that's a
bunch of variable reshuffling that can be done later.
They are now factored out to an inline function named incompetitive().
This is so their usage can be changed without having to change each
individual one in every place. This also clarifies the intent of using
these conditionals (they are for when we're in a "competitive" mode).
Tower backgrounds have a bypos and bscroll. bypos is just the y-position
of the background, and bscroll is the amount of pixels to scroll the
background by on each frame, which is used to scroll it (if it's not
being redrawn) and for linear interpolation.
For the tower background (and not the title background), bypos is
map.ypos / 2, and bscroll is (map.ypos - map.oldypos) / 2. However,
usually bscroll gets assigned at the same time bypos is incremented or
decremented, so you never see that calculation explicitly - except in
the previous commit, where I worked out the calculation because the
change in y-position isn't a known constant.
Having to do all these calculations every time introduces the
possibility of errors where you forget to do it, or you do it wrongly.
But that's not even the worst; you could cause a linear interpolation
glitch if you decide to overwrite bscroll without taking into account
map.oldypos and map.ypos.
So that's why I'm adding a function that automatically updates the tower
background, using the values of map.oldypos and map.ypos, that is used
every time map.ypos is assigned. That way, we have to write less code,
you can be sure that there's no place where we forget to do the
calculations (or at least it will be glaringly obvious) or we do it
wrongly, and it plays nicely with linear interpolation. This also
replaces every instance where the manual calculations are done with the
new function.
If you have invincibility enabled and push the camera, the background
would smear. This is because the game doesn't calculate the proper
bscroll and bypos of the tower background, and also doesn't end up
redrawing it.
We do both these things now, so this is fixed.
These places didn't assign map.oldypos when they assigned map.ypos. This
could have only resulted in visual glitches, but it's good to be
consistent and proactively fix these.
This fixes issues where they would be silent for 1 frame due to frame
ordering, resulting in a weird-sounding beginning of these tracks due to
a lack of attack (in the musical sense).
This is similar to the issue where tracks fading in would suddenly be
loud for 1 frame, again due to frame ordering.
This fixes issues with music playing, only for it to fade out
afterwards. This happened if tracks 0 or 7 were played after fading out,
because playing other tracks reset the fade booleans (by calling a
fade-in), but not tracks 0 or 7.
The previous fade system used only one variable, the amount of volume to
fade per frame. However, this variable was an integer, meaning any
decimal portion would be truncated, and would lead to a longer fade
duration than intended.
The fade per volume is calculated by doing MIX_MAX_VOLUME / (fade_ms /
game.get_timestep()). MIX_MAX_VOLUME is 128, and game.get_timestep() is
usually 34, so a 3000 millisecond fade would be calculated as 128 /
(3000 / 34). 3000 / 34 is 88.235..., but that gets truncated to 88, and
then 128 / 88 becomes 1.454545..., which then gets truncated to 1. This
essentially means 1 is added to or subtracted from the volume every
frame, and given that the max volume is 128, this means that the fade
lasts for 128 frames. Now, instead of the fade duration lasting 3
seconds, the fade now lasts for 128 frames, which is 128 * 34 / 1000 =
4.352 seconds long.
This could be fixed using floats, but when you introduce floats, you now
have 1.9999998 problems. For instance, I'm concerned about
floating-point determinism issues.
What I've done instead is switch the system to use four different
variables instead: the start volume, the end volume, the total duration,
and the duration completed so far (called the "step"). For every frame,
the game interpolates which value should be used based on the step, the
total duration, and the start and end volumes, and then adds the
timestep to the step. This way, fades will be correctly timed, and we
don't have potential determinism issues.
Doing this also fixes inaccuracies with the game timestep changing
during the fade, since the timestep is only used in the calculation
once at the beginning in the previous system.
To exclude gravitron squares, the game excluded all entities whose
`size` was 12 or higher. The `size` of the player when they transform
into VVVVVV-Man is 13.
We have already inadvertently fixed VVVVVV-Man not warping vertically in
2.2. This was done with the previous room transition/warping code
refactors; the gravitron square conditionals were simply excluded from
the vertical warp code, because there's no situation where there would
ever be a gravitron square outside the screen vertically.
As with making rescuable crewmates warpable, I have yet to ever see
people use VVVVVV-Man in a custom level. It's not like they would want
to use it anyway; VVVVVV-Man is really, really buggy. And it's probably
better to make it less buggy, starting with this commit.
That being said, VVVVVV-Man's collision when warping horizontally is
really janky, so I still wouldn't use it.
The game excluded every entity whose `type` was 50 or higher. The `type`
of rescuable crewmates is 55.
Could some levels be broken by this behavior? Unlikely; without warping,
the crewmates would end up falling out of the room and would become
unrescuable. So this is more likely to fix than to break.
But more importantly, *no one knows that rescuable crewmates don't
warp*. If anyone would know, it would be me, because I've been in the
custom levels community for over 7 years - and yet, during that time, I
have not seen anyone run into this corner case. If they did, I would
remember! This implies that people simply have never thought about
putting rescuable crewmates in places where they would warp - or they
have, ran into this issue, and worked around it.
With those two reasons, I'm comfortable fixing this inconsistency.
This saves one indentation level. I also fixed the comments a bit
(multiline instead of single-line, "gravitron squares" instead of "SWN
enemies", also commented the player exclusion from horizontal wrapping
in vertically-wrapping rooms).
This fixes a bug where using the fullscreen toggle keybind (Alt+Enter,
Alt+F, or F11) wouldn't update the color of the "resize to nearest" menu
option. The color doesn't functionally change anything - the option
still won't work, and will still have the message telling you that you
need to be in windowed mode when you move your menu selection to it -
but it's an easy inconsistency to fix; just move the menu recreation in
to Screen::toggleFullScreen() itself.
The game dereferences graphics.screenbuffer without checking it first...
it's unlikely to happen, but the least we can to do be safe is to add a
check and assert here.
If there were two scripts with the same name, removing one of them would
only remove the other script from the script name list, and not also
remove the contents of said script - leading to a desync in state, which
is probably bad.
Fixing this isn't as simple as removing the break statement - I either
also have to decrement the loop variable when removing the script, or
iterate backwards. I chose to iterate backwards here because it
relocates less memory than iterating forwards.
No need to use it when good ol' loops work just fine.
Iterating backwards is correct here, in case there happen to be more
than one of the item in the vectors, and also to minimize the amount of
memory that needs to be relocated.
This is a simple change - we draw minimap.png, instead of the generated
custom map, if it is a per-level mounted custom asset.
Custom levels have already been able to utilize minimap.png, but it was
limited - they could do gamemode(teleporter) in a script, and that would
show their customized minimap.png, but it's not like the player could
look at it during gameplay.
I would have done this earlier if I had figured out how to check if a
specific asset was mounted or not.
Previously, if the game couldn't set the write dir to the base
directory, or couldn't make the base directory, or couldn't calculate
the base directory, it would probably dereference NULL or read from
uninitialized memory or murder your family or something. But now, I've
eliminated the potential Undefined Behavior from the code dealing with
the base path.
Previously, this function had a bug due to failing to account for array
decay. My solution was to just repeat the MAX_PATH again. But in
hindsight I realize that's bad because it hardcodes it, and introduces
the opportunity for an error where we update the size of the original
path but not the size in the function.
So instead, just pass the size through to the function.
I don't want to add too many asserts, because sometimes it's okay if a
file is missing (mmmmmm.vvv). But currently, the game basically expects
all images and sound effects to be present. That might change in the
future, but for now, these asserts are okay.
FILESYSTEM_loadFileToMemory() dereferenced pointers without checking if
they were valid... I don't know of any cases where they could have been
NULL, but better safe than sorry.
So, the codebase was kind of undecided about who is responsible for
initializing the parameters passed to FILESYSTEM_loadFileToMemory() - is
it the caller? Is it FILESYSTEM_loadFileToMemory()? Sometimes callers
would initialize one variable but not the other, and it was always a
toss-up whether or not FILESYSTEM_loadFileToMemory() would end up
initializing everything in the end.
All of this is to say that the game dereferences an uninitialized
pointer if it can't load a sound effect. Which is bad. Now, I could
either fix that single case, or fix every case. Judging by the title of
this commit, you can infer that I decided to fix every case - fixing
every case means not just all cases that currently exist (which, as far
as I know, is only the sound effect one), but all cases that could exist
in the future.
So, FILESYSTEM_loadFileToMemory() is now guaranteed to initialize its
parameters even if the file fails to be loaded. This is better than
passing the responsibility to the caller anyway, because if the caller
initialized it, then that would be wasted work if the file succeeds
anyway because FILESYSTEM_loadFileToMemory() will overwrite it, and if
the file fails to load, well that's when the variables get initialized
anyway.
My next commit will involve using goto to jump to the end of a function
to initialize the variables to NULL, but that results in a compiler
error if we have initializations in the middle of the function. We might
as well put all declarations at the top of each block anyway, to help
the move to C, so I'm doing this now.
Since the length variable in the STDIN block now overshadows the length
variable in the outer block, I've renamed the length variable in the
block to stdin_length.
These casts are sprinkled all throughout the graphics code when creating
and initializing an SDL_Rect on the same line. Unfortunately, most of
these are unnecessary, and at worst are wasteful because they result in
narrowing a 4-byte integer into a 2-byte one when they don't need to
(SDL_Rects are made up of 4-byte integers).
Now, removing them reveals why they were placed there in the first place
- a warning is raised (-Wnarrowing) that implicit narrowing conversions
are prohibited in initializer lists in C++11. (Notably, if the
conversion wasn't narrowing, or implicit, or done in an initializer
list, it would be fine. This is a really specific prohibition that
doesn't apply if any of its sub-cases are true.)
We don't use C++11, but this warning can be easily vanquished by a
simple explicit cast to int (similar to the error of implicitly
converting void* to any other pointer in C++, which works just fine in
C), and we only need to do it when the warning is raised (not every
single time we make an SDL_Rect), so there we go.
This fixes a bug where after loading in to the level editor, pressing
Esc and then switching your option to something other than the first
option, then pressing Esc again to close the menu, then pressing Esc
once more would not keep your menu option.
This is because the code that checks if Menu::ed_settings is already in
the stack doesn't account for if ed_settings is the current menu - the
current menu doesn't get put in to the stack.
In hindsight, maybe I could have designed the new menu system better so
the current menu IS on the stack, and/or should have used a
statically-allocated linked list for each menu name for the stack frames
(instead of an std::vector) and asserted if a menu that already existed
in the stack was created instead... that'll have to be done later,
though.
Pressing Esc to cancel the confirm quit menu didn't play the squeak, in
contrast to pressing ACTION to cancel it, so now it does; pressing Esc
to close the pause menu or pressing ACTION will also now play the
Viridian squeak too.
vx/vy mean x-velocity and y-velocity... except here, where it seems like
they're used as extra parameters that do different things depending on
the entity. But it seems like at one point they were actually meant to
be the speed of the entity (this is the case for the unused decorative
particle entities), and then just never got renamed when they weren't.
The custom levels community named these two parameters meta1 and meta2
in the reference list of entities for the createentity() script command,
so that's what I'm naming them here. This will avoid confusion (I know
that some people reading this function have genuinely mistaken the vx/vy
for actually meaning x-velocity and y-velocity, simply because they were
named that way).
I have spelled out each overloaded version instead, and only the
overloads that are actually used - which just happens to be everything
except the 8-argument one. I don't want to deal with callers right now
(there are too many of them), so I'm not going to change the names that
the callers use, nor do I want to change the amount of arguments any
existing callers use right now - but we will have to deal with them in
one way or another when we move to C.
The script command createentity() is always an int. But not only that,
every time createentity() is used, its arguments are always treated like
ints. Always. I knew that vx/vy were floats because of the int casts in
the function, but I didn't even realize that xp/yp were floats, too,
until I checked just now! That's how much they're treated like ints.
All int casts in createentity() have also been removed, due to being
unnecessary (either because of us suppressing MSVC implicit conversion
warnings, or because there are now no longer any conversions happening).
This boolean is assigned, and it is checked... but it's never assigned
to true, thus making it useless. I also checked 2.2 source and the same
thing happens there; to prevent any confusion, I'm removing this.
So... I did see that map.ypos was a float when I added over-30-FPS mode,
because map.oldypos wasn't there before... I'm guessing that I kind of
just ignored it at the time. But, c'mon, map.ypos and map.oldypos are
always treated as ints, so there's literally no reason for them to be
actually floats in reality. I didn't even know they were anything other
than ints until I checked Map.h.
This is quite simple - whenever the user uses their keyboard or
controller, we hide the mouse cursor. Whenever they move the mouse, we
show it again. This makes it so the cursor gets out of the way when they
play the game, but reappears when they need it.
There is also a timeout, to prevent strobing if the user decides to use
the keyboard/controller and mouse at the same time. There is no timeout
from hiding the mouse cursor, but there is a timeout from showing the
mouse cursor - this because it's okay if the mouse lingers for a few
frames when you start using the keyboard, but really annoying if the
mouse doesn't instantly appear when you move it.
The config option has been removed. I'm going to implement something
that automatically shows and hides the mouse cursor whenever
appropriate, which is better than a config option.
These are two C++ features that we don't need, don't use, and will never
use in the future. Apparently the best way of doing this in CMake is to
fiddle with the CXX_FLAGS using regex.
Now this is one less flag I need to supply myself when I invoke CMake...
This variable is not defined anywhere and never has been since the
source code release (which is when this CMake file was first created).
To make things clearer, I'm cleaning this variable up.
A function like add_definitions() adds definitions to ALL targets, not
just VVVVVV. This kind of namespace pollution is messy, and could result
in bugs if you pollute with the right kind of pollutant.
So instead of using add_definitions(), use target_compile_definitions().
And instead of using include_directories(), use
target_include_directories().
All the C third-party dependencies are C90, and all the C files we have
are also C90 (well, almost, but that's easily sorted). So we have
basically no reason to not go with C90 here.
The only wrinkle is, turning C extensions off for physfs-static results
in linker errors because PhysFS implicitly uses alloca() without
including it properly (on Linux). I am not the only one who has ran into
this - see https://icculus.org/pipermail/physfs/2020-April/001293.html -
and it's a bug with PhysFS. The workaround I've gone with is to enable C
extensions. (There might also be some funkiness with PhysFS's use of the
`inline` keyword, so enabling extensions will paper over that as well.)
So there were actually only two instances of C99-style end-of-line
comments in C files - and technically one of them was just a C file
including MakeAndPlay.h.
It seems like CMake 3.1.3 introduced the C/C++ standard properties,
while the minimum version of this CMake file is 2.8.12. So we do what
FAudio does, which is print a warning if the CMake version is too old
and otherwise use it if we have the feature.
They're the same thing, but using option() better conveys intent.
However this can't be done for anything that isn't a bool, which the
CUSTOM_LEVEL_SUPPORT option is not (it's a tri-state string).
These were introduced in 098fb77611 - did
Leo not know that they were already there at the top of the file? This
does the same thing, except it only sets it for VVVVVV instead of
everything (so this wouldn't set it for the third-party dependencies).
If a track was restarted after it faded out, then it wouldn't play. This
is because currentsong wasn't set to -1 after fading out, and that is
because the fade out calls pause() instead of haltdasmusik() when it
finishes.
Unlike f196fcd896, this fixes the time
trial music while keeping it to the same behavior as 2.2, and fixes
every single possible case that this music bug could have happened.
This reverts only a part of f196fcd896 -
as the original commit author did not do their changes atomically, they
also squashed in a de-duplication within the same commit. So I'm only
reverting the part of the commit that wasn't the de-duplication, which
is simply the changes to the music.fadeout() calls.
This is being (partially) reverted for several reasons:
1. It's not the correct behavior. What this does instead is persist the
track through after you restart the time trial, instead of fading it
out, then restarting it again. This is in contrast to behavior in
2.2, and I see no reason to not keep the same behavior.
2. It's a single-case patch. The time trials are not the only time in
the game a music track could fade out and then be restarted with the
same track - custom levels could do the same thing too. Instead of
fixing only one case, we should strive to fix EVERY case.
The original commit author (trelbutate) also didn't write anything in
the commit description of f196fcd896. What
you should write in the commit description is things like rationale,
analysis, and other good information that would be useful to anyone
looking at your commit to understand why you did what you did. Having no
commit description leaves readers in the dark as to why you did what you
did.
Thus, I don't know why trelbutate went with this solution, or if they
knew that it was only a single-case patching, or if they knew that it
wasn't 2.2 behavior.
By not writing the commit description, they miss a chance for
reflection; speaking from personal experience, I myself have gone back
and improved my commits countless times because I wrote commit
descriptions for every single one of them, and sometimes whenever I
write them, I think to myself "hang on a minute, that doesn't sound
quite right" and end up finding improvements.
If trelbutate wrote a commit description, they might have realized that
it wasn't 2.2 behavior, and gone back and fixed up their commit to be
correct. As it stands, though, they didn't have to think about it in the
first place because they never bothered to write a commit description.
edteleportent is a global variable that gets assigned whenever the
player collides with a warp token, and gets read from later down the
line in gamelogic(). While I don't know of any way to cause anything bad
with this (and I did try), storing a temporary indexing variable like
this is only bound to be a liability in the future - so we might as well
prevent badness now by adding a bounds check here.
This fixes a bug where quitting to the menu from command-line
playtesting with -playassets specified would always use those assets
when loading back in to any custom level. This also fixes loading in to
a custom level quicksave always using the command-line playtesting
arguments instead of using the actual quicksave.
In a vertically-warping room, the 'height' of the room becomes 232
pixels, regardless of if you have a room name or not. So the remaining 8
rows of pixels at the bottom of the screen corresponds with the first 8
rows of pixels at the top of the screen, and entities in the bottom 8
rows of pixels get teleported to the top of the screen.
The screen wrapping drawing code doesn't draw entities in the top 8 rows
of pixels at the bottom, leading to a discontinuous effect where it
looks like vertically-warping entities don't neatly change from the
bottom to the top or vice versa - this is especially noticeable with
enemies. To fix this, just increase the threshold for drawing top
entities at the bottom of the screen by 8 pixels.
When an entity vertically warps, it teleports upwards or downwards by
232 pixels. However, the graphics code draws them with an offset of 230
pixels. This is off by 2 pixels, but it's enough to make a
downwards-moving enemy look like it suddenly collides with the bottom of
the screen (in a room without a room name) before it warps, especially
if you go frame-by-frame.
It seems like for whatever reason that the frames portion of save files
is never read from, and always zeroed. Well, technically they get parsed
but the result is immediately discarded afterwards.
I see no reason to do this, so I'm removing these zeroes.
This fixes being able to make music fully fade in (or out) by unfocusing
the game, or making the fade bars fully fade in (or out) by unfocusing
the game, or racking up the timer while the game is unfocused.
In 2.2 and previous, the game would call resetgameclock() every frame
for the last 30 frames of the time trial countdown in order to make sure
it gets reset. This was in a render function, and didn't get brought out
in 2.3, so 2.3 resets the game clock *while rendering*, which is kinda
bad and is an oversight on my part for not noticing.
Instead of doing that, just add a conditional to the timer so that it
won't tick during the time trial countdown. This fixes#699 even further
by making it so the time trial par can't even be lost during the
countdown, because the timer won't tick up - so you can never get a sad
squeak to play by pausing the game or unfocus-pausing it during the
countdown.
For some reason, resetgameclock() is only ever used in gamerender(), and
everywhere else just zeroes the clock manually. This is weird to me, so
I've made it so everywhere that zeroes the clock uses the
resetgameclock() function to do so.
Otherwise, if the timer ticked up past the par (via using the unfocus
pause or pause menu), it would result in the sad squeak being played
every frame because the game would constantly be setting
timetrialparlost, then moving to the code block below, assuming that
since timetrialparlost that we haven't lost the par already, and playing
the squeak.
timetrialparlost gets reset in hardreset() and startgamemode() anyways,
so there's no need to be constantly resetting this variable.
Fixes#699.
It turns out this entire chunk of code is simply unneeded (and is
actively harmful) since when we're done with the time trial,
quittomenu() gets called, and that removes the previous stack frame
anyway.
I'm guessing that I added this code, then added quittomenu(), then
didn't consider how this code and quittomenu() would mix. But anyways,
this bug is fixed.
Fixes#714.
This seems to be a comment left by Ethan that he never got around to. So
I did it for him.
What I've done is made it so FileSystemUtils.cpp knows what a binary
blob is, and moved the binary blob loading code directly to
FileSystemUtils.cpp. To do this, I removed the private access modifier
from binaryBlob - I don't think we'll need it, and anyways when we move
to C we can't use it.
Along the way, I also cleaned up the style of the function a bit - the
null termination offset is no longer hardcoded, and the function no
longer mixes code and declarations together in the same block.
I also noticed that when printing all the filenames at the end, a single
invalid header would stop the whole loop instead of just being skipped
over... this seems to be a bug to me, so I've made it so invalid headers
just get skipped over instead of stopping the whole loop.
In FileSystemUtils.h, I used a forward declaration. In hindsight,
incomplete forward declarations should basically always be done in
header files if possible, otherwise this introduces the possibility of
transitive includes - if a file includes this header and it does a full
include, the file is silently able to use the full header, whereas if
it's a forward declaration, then the moment the file tries to use the
full header it fails, and then it's forced to include the full header
for itself. But uh, that's a code cleanup for later.
While fixing all the other music bugs, I discovered that starting
playtesting in the editor wouldn't play the level music.
The problem is that the editor playtesting start code calls
music.fadeout() before calling music.play(). This queues up the track
from the music.play() call. After that, what should happen is that
processmusic() processes the fade, the fade is then finished, and then
after that it sees that the music is halted so it can play the queued
track.
Instead what happens is that the function first attempts to play the
music before the fade is processed and finished, so play() will re-queue
the music again, but the queue gets cleared right after that (this is a
subtle bit of behavior - it means if the game fails to play a queued
track due to it fading, it's not going to re-queue it again and end up
in some sort of infinite loop).
This is a frame ordering issue - the function is tripping over itself
when it shouldn't be. To fix it, just put the queue processing code
after the fade processing code.
This fixes the 2.2-and-below music blocking workaround not working in
2.3.
The issue was that when the music got halted by the script, the fade
volume would still be processing, silently being decremented in the
background. So the script playing the track afterwards would make the
game queue it (as it was called during the fade), but then the music is
halted so the game would attempt to play it, but the fade is STILL
happening so it wouldn't actually play it and would attempt to queue the
track again.
However, that queue gets discarded immediately afterwards because the
music.play() call happened inside the code responsible for playing the
queued music, and that code unconditionally clears the queue variables
immediately after calling play(). So that's good to know - if the game
queues a song, but fails to play it because of a fade, it's not going to
immediately re-queue it and potentially get stuck in a loop of
infinitely queueing the same song over and over again each frame.
Anyways, the source of the problem is not resetting the fade booleans
when halting music, so I've reset them.
Fixes#701.
The problem here is that even though we start playing the music when the
volume is set to zero, mixer's state doesn't have volume zero, so
whatever it plays next will be the very first quanta of the track but at
the previous volume (in this case, the maximum volume). To fix this,
just update mixer when we update the volume here - it's okay to not
account for user volume because it ends up being zero anyway.
Fixes#710.
This fixes a bug where fading music in but not going through the
music.play() path wouldn't start the fade volume from zero. If this
happened, then the previous volume would persist, and if the previous
volume was the max volume, then that essentially canceled out the
fade-in and prevented it from happening at all. But now all paths to
fadeMusicVolumeIn() set the volume to zero first, instead of only the
caller of music.play().
When you pick up a trinket in the wild, the music gets silenced, so it
silently plays in the background until you advance the trinket text.
However, foundtrinket (used when Victoria or Vitellary give you a
trinket) is inconsistent with this, and halts the music instead of
silencing it.
This was probably due to the musicfadein script command not being
implemented, so Terry or Simon had to simply make do and halt the music
instead. But musicfadein is implemented and is being used in the trinket
cutscenes, so this is another inconsistency that I will fix.
When you pick up a trinket in the wild, the music will fade back in
afterwards. However, the special trinket cutscenes (where Victoria or
Vitellary will directly give you a trinket) are inconsistent with this,
and restart the music instead of fading it back in.
Looking at the scripts themselves, it immediately becomes obvious the
reason for this inconsistency - 2.2 and previous didn't implement the
musicfadein command, so it couldn't be used, and Terry or Simon simply
had to make do with simply restarting the music. However, 2.3 implements
musicfadein, so we can simply swap it out and remove the
trinketscriptmusic command.
This is 2.2 behavior, which I forgot to keep. Otherwise, if music has
halted and you try to play the same track, it simply won't work, because
the current song is the same as the song you're trying to play. This is
what happened with the trinket scripts - the game halted music, then
tried to play the same track.
Fixes#712.
It's not really used because CreateDirectory doesn't support setting
chmod values, but it does clarify intent of the argument.
Co-authored-by: Ethan Lee <flibitijibibo@gmail.com>
In #52 I fixed VVVVVV not being able to handle filepaths with non-ASCII
characters on Windows. 2f0a0bce4c and
aa5c2d9dc2 reintroduce this problem,
however, by reverting the definition of mkdir to how it was before the
fix and using the non-Unicode version of CreateDirectory. And I can
confirm that VVVVVV indeed doesn't make its folder anymore with a
Windows username of "тест". This commit fixes that issue.
This adds music and volume sliders to the audio options. To use the
sliders, you navigate to the given option, then press ACTION, and your
selection will be transferred to the slider. Pressing left or right will
move the slider accordingly. Then you can press ACTION to confirm the
volume is what you want and deselect it, or you can press Esc to cancel
the volume change, and it will revert to the previous volume; both
actions will write your settings to disk.
Most of this commit is just adding infrastructure to support having
sliders in menus (without copy-pasting code), which is a totally
completely new user interface that has never been used before in this
game. If we're going to be adding something new, I want to make sure
that it at least is done the RIGHT way.
Closes#706.
This adds <musicvolume> and <soundvolume> tags to unlock.vvv and
settings.vvv, so users' volume preferences will be persistent across
game sessions. This does not add the user interface to change them from
in-game; the next commit will do that.
This function is simple - it takes a given buffer and its size, fills it
with a certain character, and null-terminates it. It's meant to be used
with freshly-created buffers, so we don't copy-paste code.
Pressing return in gameplay options would send you back to the pause
menu instead of the general options menu, and pressing return in graphic
options would send you back to the pause menu instead of the general
options menu, too. Additionally, pressing Esc in graphic options would
also send you back to the pause menu instead of the general options
menu.
Like I said before, the menu system is still a bit hardcoded in some
places, and these happened because Terry forgot to update them when he
changed the menus around.
Fixes#711.
The in-game menu code is better than it was in 2.2 but still pretty
hardcoded, so to fix this just change each individual case around. This
bug happened because the "options" button was in the place where "quit
to menu" was previously, but Terry forgot to update it when changing all
the options around.
PhysFS requires a write dir to create a directory, so the first PHYSFS_mkdir
never could have worked. Because of that we need to go back to the old mkdir,
and since we're bringing that back we can reuse it for saves/levels, because we
know it works and we don't have to worry about middlewares ruining anything.
When a text box in the script system (not the gamestate system) is
displayed onscreen and "- Press ACTION to advance text -" is up, the
game sets pausescript to true, so the script system won't blare past the
text box and keep executing. Then it also sets advancetext to true.
Crucially, these two variables are different, so if you have pausescript
true but advancetext false, then what happens?
Well, you get softlocked. There's no way to continue the script.
How is this possible? Well, you can teleport to the (0,0) teleporter
(the teleporter in the very top-left of the map) and regain control
during the teleporter animation. To do that, in 2.2 and below, you have
to press R at the same time you press Enter on the teleporter, or in 2.3
you can simply press R during the cutscene. Then once you teleport to
the room, it's really precise and a bit difficult (especially if
Viridian is invisible), but you can quickly walk over to the terminal in
that room and press Enter on it.
Then what will happen is the terminal script will run, but the
teleporter gamestate sequence will finish and turn advancetext off in
the middle of it. And then you're softlocked.
To fix this, just add a check so if we're in gamestate 0 and there's a
script running, but we have pausescript on and advancetext off, just
turn pausescript off so the game automatically advances the script.
This softlock was reported by Tzann on the VVVVVV speedrunning Discord.
If you manage to get softlocked by being stuck in completestop, the next
thing you'll notice is that quitting to the menu or loading back in will
not reset this.
So you can actually softlock yourself in 2.3 by doing the trinket
cutscene, then quitting to the menu (because 2.3 lets you open the pause
menu during completestop). This is a bug, and should be fixed.
You can skip the "You have found a shiny trinket!" cutscene. The
conditions are that this can only be done in the main game, in the main
dimension (no Polar Dimension), the checkpoint that you last touched
must not be in the same room as the trinket, and you have to have
skipped the Comms Relay cutscene. To do the skip, you press R on the
exact frame (or previous frame, if input delay is enabled) that Viridian
touches the trinket. Then, the gamestate will be immediately set to 0
(because of the gotoroom) and the cutscene will be skipped.
Speedrunners of the main game, well, run the main game already, the
only trinket in the Polar Dimension is not one you want to do a death
warp at, and they have a habit of automatically skipping over the Comms
Relay cutscene because they press R at the beginning of the run when
Viridian teleports to Welcome Aboard, to warp back to the Ship and so
they can leave rescuing Violet for later.
So someone reported softlocking themselves by doing the trinket text
skip in 2.3. The softlock is because they're stuck in a state where
completestop is true but can't advance to a state that turns it off. How
does this happen? It's because they pressed R too late and interrupted
the gamestate sequence. In 2.2 and previous, if you're in the gamestate
sequence then you can't press R at all, but 2.3 removes this restriction
(on account of aiming to prevent softlocks). So only on the very first
frame can you death warp and interrupt the gamestate sequence before it
happens at all.
Anyways to fix this, just turn completestop off automatically if we're
in gamestate 0 and there's no script running.
This softlock was reported by Euni on the VVVVVV speedrunning Discord.
So some people reported the levels list crashing when they loaded it.
But this wasn't reproducible every time. They didn't provide any
debugging information, so I had to use my backup plan: doing a full
audit of the code path taken for loading the levels list.
And then I found this. It turns out this was because I used a
LOAD_ARRAY_RENAME() macro on an std::vector. You can't do that because
you need to use push_back() to resize a vector, so the macro will end up
indexing into nothing, causing a segfault. However, this code path would
only be taken if you have an old levelstats.vvv, from 2.2 and previous -
which explains why it wasn't 100% reproducible. But now that I know you
need an old levelstats.vvv, this bug happens 100% of the time.
Anyways, to fix this, just ditch the macro and expand it manually, while
replacing the indexing with a proper usage of push_back().
While the game does support playing levels with filenames that don't
have the .vvvvvv extension, it doesn't do it well.
Namely, those files can't be loaded or saved into the editor (because a
.vvvvvv always gets tacked on to your input when saving or loading). In
2.3, this gets worse because you can't load a level without a .vvvvvv
extension from command-line playtesting (because a .vvvvvv automatically
gets added) and you can't load per-level custom assets.
The only place where extensionless level files are supported is when
loading level metadata. But this makes it so they no longer work. This
is technically an API break, but it's easily fixed (just add the
.vvvvvv), plus there's nothing to be gained from not having an
extension, plus basically no one ever actually did this in the first
place (as far as I know, I am the only person to have ever done this,
and no one else ever has).
This fixes an issue where you would be able to mount things other than
custom assets in per-level custom asset directories and zips.
To be fair, the effects of this issue were fairly limited - about the
only thing I could do with it was to override a user-made quicksave of a
custom level with one of my own. However, since the quicksave check
happens before assets are mounted, if the user didn't have an existing
quicksave then they wouldn't be able load my quicksave. Furthermore,
mounting things like settings.vvv simply doesn't work because assets
only get mounted when the level gets loaded, but the game only reads
from settings.vvv on startup.
Still, this is an issue, and just because it only has one effect doesn't
mean we should single-case patch that one effect only. So what can we
do?
I was thinking that we should (1) mount custom assets in a dedicated
directory, and then from there (2) mount each specific asset directly -
namely, mount the graphics/ and sounds/ folders, and mount the
vvvvvvmusic.vvv and mmmmmm.vvv files. For (1), assets are now mounted at
a (non-existent) location named .vvv-mnt/assets/. However, (2) doesn't
fully work due to how PhysFS works.
What DOES work is being able to mount the graphics/ and sounds/ folders,
but only if the custom assets directory is a directory. And, you
actually have to use the real directory where those graphics/ and
sounds/ folders are located, and not the mounted directory, because
PHYSFS_mount() only accepts real directories. (In which case why bother
mounting the directory in the first place if we have to use real
directories anyway?) So already this seems like having different
directory and zip mounting paths, which I don't want...
I tried to unify the directory and zip paths and get around the real
directory limitation. So for mounting each individual asset (i.e.
graphics/, sounds/, but especially vvvvvvmusic.vvv and mmmmmm.vvv), I
tried doing PHYSFS_openRead() followed by PHYSFS_mountHandle() with that
PHYSFS_File, but this simply doesn't work, because PHYSFS_mountHandle()
will always create a PHYSFS_Io object, and pass it to a PhysFS internal
helper function named openDirectory() which will only attempt to treat
it as a directory if the PHYSFS_Io* passed is NULL. Since
PHYSFS_mountHandle() always passes a non-NULL PHYSFS_Io*,
openDirectory() will always treat it like a zip file and never as a
directory - in contrast, PHYSFS_mount() will always pass a NULL
PHYSFS_Io* to openDirectory(), so PHYSFS_mount() is the only function
that works for mounting directories.
(And even if this did work, having to keep the file open (because of the
PHYSFS_openRead()) results in the user being unable to touch the file on
Windows until it gets closed, which I also don't want.)
As for zip files, PHYSFS_mount() works just fine on them, but then we
run into the issue of accessing the individual assets inside it. As
covered above, PHYSFS_mount() only accepts real directories, so we can't
use it to access the assets inside, but then if we do the
PHYSFS_openRead() and PHYSFS_mountHandle() approach,
PHYSFS_mountHandle() will treat the assets inside as zip files instead
of just mounting them normally!
So in short, PhysFS only seems to be able to mount directories and zip
files, and not any loose individual files (like vvvvvvmusic.vvv and
mmmmmm.vvv). Furthermore, directories inside directories works, but
directories inside zip files doesn't (only zip files inside zip files
work).
It seems like our asset paths don't really work well with PhysFS's
design. Currently, graphics/, sounds/, vvvvvvmusic.vvv, and mmmmmm.vvv
all live at the root directory of the VVVVVV folder. But what would work
better is if all of those items were organized into a subfolder, for
example, a folder named assets/. So the previous assets mounting system
before this patch would just have mounted assets/ and be done with it,
and there would be no risk of mounting extraneous files that could do
bad things. However, due to our unorganized asset paths, the previous
system has to mount assets at the root of the VVVVVV folder, which
invites the possibility of those extraneous bad files being mounted.
Well, we can't change the asset paths now, that would be a pretty big
API break (maybe it should be a 2.4 thing). So what can we do?
What I've done is, after mounting the assets at .vvv-mnt/assets/, when
the game loads an asset, it checks if there's an override available
inside .vvv-mnt/assets/, and if so, the game will load that asset
instead of the regular one. This is basically reimplementing what PhysFS
SHOULD be able to do for us, but can't. This fixes the issue of being
able to mount a quicksave for a custom level inside its asset directory.
I should also note, the unorganized asset paths issue also means that
for .zip files (which contain the level file), the level file itself is
also technically mounted at .vvv-mnt/assets/. This is harmless (because
when we load a level file, we never load it as an asset) but it's still
a bit ugly. Changing the asset paths now seems more and more like a good
thing to do...
This will clarify which directory, exactly, failed to mount. I know it
gets printed earlier in the mounting process, but it can't hurt to print
it twice, just to be sure. Also this is for consistency.
Default function arguments are the devil, and it's better to be more
explicit about what you're passing into the function. Also because we
might become C-only in the future and to help faciliate that, we should
get rid of C++-isms like default function arguments now.
PHYSFS_getDirSeparator() already gets called and stored in pathSep at
the top of FILESYSTEM_init(). So clearly, two people worked on this
function and forgot that both pieces of code existed at the same time
(or it was one person independently forgetting both).
PhysFS uses platform-independent notation, so we really don't need to
care about getting the correct dir separator here. Especially since we
don't ever do so anywhere else (e.g. load/saveTiXml2Document()), either.
This is to make it clear that this is not a general-purpose mounting
function; it is a helper function for FILESYSTEM_mountAssets()
specifically for treating a directory or file as an assets directory,
and mounting assets from there.
There's no reason to handle mounting .zip files differently than
mounting a directory... we already mount .data.zip files using
FILESYSTEM_mount(), so why go through the trouble of opening a .zip
manually (which means on Windows the .zip can't be touched for the
duration of playing the custom level), making up a place to mount it at,
and then mount that made-up name, instead of just using
FILESYSTEM_mount()?
Whoever cobbled this asset mounting thing together really didn't fully
understand what they were doing.
This way, we avoid the unnecessary graphics.reloadresources() call - if
we can't mount assets, why bother reloading resources?
The return type of FILESYSTEM_mount() has been changed from void to bool
to indicate success, accomodating its callers accordingly.
I haven't been able to reproduce this old thing on any setup I have. The patch
from 2013 was originally for X11, and Wayland's fullscreen doesn't allow for
this sort of thing, so let's start scoping this down for eventual removal when
X11 is finally out of our minds forever.
So it looks like facb079b35 (PR #316) had
a few issues.
The SDL performance counter doesn't really work that well. Testing
reveals that unfocusing and focusing the game again results in
the resumemusic() script command resuming the track at the wrong time.
Even when not unfocusing the game at all, stopping a track and resuming
it resumes it at the wrong time. (Only disabling the unfocus pause fixes
this.)
Furthermore, there's also the fact that the SDL performance counter
keeps incrementing when the game is paused under GDB. So... yeah.
Instead of dealing with the SDL performance counter, I'm just going to
pause and resume the music directly (so the stopmusic() script command
just pauses the music instead). As a result, we no longer can keep
constantly calling Mix_PauseMusic() or Mix_ResumeMusic() when focused or
unfocused, so I've moved those calls to happen directly when the
relevant SDL events are received (the constant calls were originally in
VCE, and whoever added them (I'm pretty sure it was Leo) was not the
sharpest tool in the shed...).
And we are going to switch over to using our own fade system instead of
the SDL mixer fade system. In fact, we were already using our own fade
system for fadeins after collecting a trinket or a custom level
crewmate, but we were still using the mixer system for the rest. This is
an inconsistency that I am glad to correct, so we're also doing our own
fadeouts now.
There is, however, an issue with the fade system where the length it
goes for is inaccurate, because it's based on a volume-per-frame second
calculation that gets truncated. But that's an issue to fix later - at
least what I'm doing right now makes resumemusic() and musicfadein()
work better than before.
musicclass already had a resume() function for music.
These are just wrappers around the appropriate SDL_mixer functions, to
avoid direct function calls to the mixer API. So if we ever need to do
something with all callers of pausing and resuming in the future, or we
switch to a different audio backend, the work is already done for us.
Also it just looks cleaner to be calling our musicclass function instead
of doing a direct API call to the mixer.
This makes it so to reuse this code, we don't have to copy-paste it.
Additionally, I added a check for the milliseconds being 0, to avoid a
division by zero. Logically and mathematically, if the fade amount is 0
milliseconds, then that means the fade should happen instantly -
however, dividing by zero is undefined (both in math and in C/C++), so
this check needs to be added.
This is an option for speedrunners whose muscle memory is precisely
trained and used to the 1-frame input delay that existed in 2.2 and
below. It is located in Game Options -> Advanced Options, and is off by
default.
To re-add the 1-frame input delay, we simply move the key.Poll() to the
start of the frame, instead of before an input function gets ran -
undoing what #535 did.
There is a frame ordering-sensitive issue here, where toggling
game.inputdelay at the wrong time could cause double-polling. However,
we only toggle it in an input function, which regardless is always
guaranteed to be ran after key.Poll() (it either happened at the start
of the frame or just before the input function got ran), so this is not
an issue. But, in case we ever need to toggle this variable in the
future, we can just use the defer callbacks system to defer the toggle
to the end of the frame - also added by #535.
Added at the request of Habeechee on the VVVVVV speedrunning Discord
server.
This fixes being unable to use teleporters while the "- Press ACTION to
advance text -" prompt is up, which is used to perform credits warp.
In 2.2 and 2.0, this advancetext check was only in gamerender() for
rendering the "- Press ENTER to Teleport -" prompt and didn't affect any
logic. In 2.3, I moved the check (and the rest of the conditional it was
in) to gamelogic() - same as the activity zone prompt conditionals - so
if you gained control while being in a prompt zone, the prompt wouldn't
suddenly appear[1].
As a side effect, this ended up aligning rendering and logic together,
so if you couldn't see the teleporter prompt, you weren't able to
teleport - whereas in 2.2 and 2.0, you could still use the teleporter
even though the prompt wasn't up.
So by removing the advancetext check, you are now able to use the
teleporter again, AND the "- Press ENTER to Teleport -" prompt will also
show up as well.
Habeechee reported this regression on the VVVVVV speedrunning Discord
server.
[1]: f07a8d2143, PR #421
One of the solutions to the quit signal unfocus pause regression is to
add a no-op delta func to the unfocused func table. However, this
results in the game being stuck in unfocus pause forever, because when
it reaches the end of a list on a delta func, it won't reassign the
active functions - only when the end of a list is a fixed func will it
do so. A workaround is to then add a no-op fixed func afterwards, but
that's inelegant.
The solution in the end to the quit signal regression is to not bother
with adding a delta func, so the game as of right now actually never has
a delta func at the end of a list, and probably never will - but this is
one piece of technical debt I don't want to leave laying around. In case
we're ever going to put a delta function at the end of a list, I've made
it so that delta functions will now reassign the list of active funcs if
they happen to be at the end of the func list.
This fixes a regression introduced by #535 where a quit signal (e.g.
Ctrl-C) sent to the window while the game was in unfocus pause wouldn't
close the game.
One problem was that key.quitProgram would only be checked when control
flow switched back to the outer loop in main(), which would only happen
when the loop order state machine switched to a delta function. As the
unfocused func table didn't have any delta functions, this means
key.quitProgram would never be checked.
So a naïve solution to this would just be to add a no-op delta func
entry to the unfocused func table. However, we then run into a separate
issue where a delta function at the end of a func list never reassigns
the active funcs, causing the game to be stuck in the unfocus pause
forever. Active func reassignment only happens after fixed funcs. So
then a naïve solution after that would be to simply add a no-op fixed
func entry after that. And indeed, that would fix the whole issue.
However, I want to do things the right way. And this does not seem like
the right way. Even putting aside the separate last-func-being-delta
issue, it mandates that every func list needs a delta function. Which
seems quite unnecessary to me.
Another solution I considered was copy-pasting the key.quitProgram check
to the inner loops, or adding some sort of signal propagation to
the inner loops - implemented by copy-pasting checks after each loop -
so we didn't need to copy-paste key.quitProgram... but that seems really
messy, too.
So, I realized that we could throw away key.quitProgram, and simply call
VVV_exit() directly when we receive an SDL_QUIT event. This fixes the
issue, this removes an unnecessary middleman variable, and it's pretty
cleanly and simply the right thing to do.
This includes all text from the Gravitron and Super Gravitron.
This is to make the text more readable if they are placed in weird
situations - for example, in custom levels, where the background these
texts get placed on could be anything (custom level makers are crazy!).
It's just like bigprint() except it duplicates some of the calculations
because I didn't want to make a bigprintoff() function which would
duplicate even more code. I'm beginning to think these text printing
functions are completely horrible to work with...
In case they get drawn against a non-contrasting background, it's still
useful to keep them readable by outlining them. This could happen if
someone were to use the Game Complete gamestate sequence in a custom
level (or presses R during Game Complete).
Flip Mode flips all the unfocus pause screen text upside-down, to make
it read in reverse order. This looks kind of strange to me, and I don't
think it was intended. So I'm flipping the text again so it's the right
way up in Flip Mode.
During the final stretch, after Viridian turns off the Dimensional
Stability Generator, the map goes all psychedelic and changes colors
every 40 frames. Entities change their colors too, including conveyors,
moving platforms, and disappearing platforms.
But play around with the disappearing platforms for a bit and you'll
notice they seem a bit glitchy. If you run on them at the right time,
the tile they use while disappearing seems to abruptly change whenever
the color of the room changes. If there's a color change while they're
reappearing (when you die and respawn in the same room as them), they'll
have the wrong tile and look like a conveyor. And even if you've never
interacted with them at all, dying and respawning in the same room as
them will change their tile to something wrong and also look like a
conveyor.
So, what's the problem? Well, first off, the tile of every untouched
disappearing platform changing into a conveyor after you die and respawn
in the same room is caused by a block of code in gamelogic() that gets
run on each entity whenever you die. This block of code is the exact
same block of code that gets ran on a disappearing platform if it's in
the middle of disappearing.
As a quick primer, every entity in the game has a state, which is just a
number. You can view each entity's state in
entityclass::updateentities().
State 0 of disappearing platforms is doing nothing, and they start with
an onentity of 1, which means they turn to state 1 when they get
touched. State 1 moves to state 2. State 2 does some decrementing, then
moves to state 3 and sets the onentity to 4. State 3 also does nothing.
After being touched, state 4 makes the platform reappear and move to
state 5, but state 5 does the actual reappearing; state 5 then sets the
state back to 0 and onentity back to 1.
So, back to the copy-pasted block of code. The block of code was
originally intended to fast-forward disappearing platforms if they were
in the middle of disappearing, so the player respawn code would properly
respawn the disappearing platform, instead of leaving it disappeared.
What it does is keep updating the entity, while the state of the entity
is 2, until it is no longer in state 2, then sets it to state 4.
Crucially, the original block of code only ran if the disappearing
platform was in state 2. But the other block of code, which was
copy-pasted with slight modifications, runs on ALL disappearing
platforms in final stretch, regardless of if they are in state 2 or not.
Thus, all untouched platforms will be set to state 4, and state 4 will
do the animation of the platform reappearing, which is invalid given
that the platform never disappeared in the first place. So that's why
dying and respawning in the same room as some disappearing platforms
during final stretch will change their tiles to be conveyors.
It seems to me that doing anything with death is wrong, here. The root
cause is that map.changefinalcol() "resets" the tile of every
disappearing platform, which is a function that gets called on every
color change. The color change has nothing to do with dying, so why
fiddle with the death code?
Thus, I've deleted that entire block of code.
What I've done to fix the issue is to make it so the tile of
disappearing platforms aren't manually controlled. You see, unlike other
entities in the game, the tile of disappearing platforms gets manually
modified whenever it disappears or reappears. Other entities use the
tile as a base and store their tile offset in the separate walkingframe
attribute, which will be added to the tile attribute to produce the
drawframe, which is the final thing that gets rendered - but for
disappearing platforms, their tile gets directly incremented or
decremented whenever they disappear or reappear, so when
map.changefinalcol() gets ran to update the tile of every platform and
conveyor, it basically discards the tile offset that was manually added
in.
Instead, what I've done is make it so disappearing platforms now use
walkingframe, and thus their final drawframe will be their tile plus
their walkingframe. Whenever map.changefinalcol() gets called, it is now
free to modify the tile of disappearing platforms accordingly - after
all, the tile offset is now stored in walkingframe, so no weird
glitchiness can happen there.
Ethan, you forgot this other one.
I do have to rejiggle the control flow of the function a bit, so it
doesn't leak memory upon failure. (Although the SDL message box leaks
memory anyway because of X11 so... whatever.) Also, there's a NULL check
for if SDL_GetBasePath() fails now.
According to SDL documentation[1], the returned pointer needs to be
freed. A glance at the source code confirms that the function allocates,
and also Valgrind complains about it.
Also if it couldn't allocate, the game no longer segfaults (std::strings
do not check if the pointer is non-NULL for operator+=).
[1]: https://wiki.libsdl.org/SDL_GetClipboardText
Since mainmenu is only ever used in Input.cpp, I might as well make it
clearer by moving it into a static global variable in Input.cpp. (The
same applies to fadetolab/fadetomenu, but I didn't think much about
those at the time... that'll be a refactor for later.)
While I've decoupled fademode from gamemode starting, being faded out on
the title screen results in a black screen and you being unable to make
any input. So we'll need to store the current fademode in a temporary
variable when going to in-game options, then put it back when we return
to the pause menu. Yes, you can turn on glitchrunner mode during the
in-game options, and then immediately return to the pause menu to
instantly go back to the title screen; this is intended.
Due to frame ordering, putting the fademode back needs to be deferred to
the end of the frame to prevent a 1-frame flicker.
It's actually sufficient enough to do this temporary fademode storage to
fix the whole thing, but I also decided to decouple fademode and
gamemode starting just to be sure.
Assuming glitchrunner mode is off, if you open the pause menu while
fully faded-out and then go to Graphic Options or Game Options, then the
'mode' that you selected previously will kick in again and you'll be
suddenly warped back.
So if you previously started a new game in the main game (mode 0, also
the selected mode if you do this from command-line playtesting), and
then open the pause menu and go to in-game options, then you'll suddenly
go back to starting a new game again. If you had started a custom level,
doing this will warp you back to the start of the level again.
The problem is simple - when the title screen is fully faded out, it
calls startgamemode(). So the solution is simple as well - just decouple
the fademode from calling startgamemode(), and use a different variable
to know when to actually call startgamemode().
Custom levels can have warp lines. If you have a warp line and a warping
background in the same room, the warp line takes precedence over the
warp background.
However, whenever you enter a room with a warp line and warp background,
any entities on the warping edges will be drawn with screenwrapping for
one frame, even though they never wrapped at all.
This is due to frame ordering: when the warp line gets created,
obj.customwarpmode gets set to true. Then when the screen edges and
warping logic gets ran, the very first thing that gets checked is this
exact variable, and map.warpx/map.warpy get set appropriately - so
there's no way the entity could legitimately screenwrap.
However, that happens in gamelogic(). gamelogic() is also the one
responsible for creating entities upon room load, but that happens after
the obj.customwarpmode check - so when the game gets around to rendering
in gamerender(), it sees that map.warpx or map.warpy is on, and draws
the screenwrapping, even though map.warpx/map.warpy aren't really on at
all. Only when gamelogic() is called in the frame later do map.warpx and
map.warpy finally get set to false.
To fix this, just set map.warpx and map.warpy to false when creating
warp lines.
I just spotted this one - if vy isn't bounds-checked, this causes bogus
input from the createentity() script command to commit Undefined
Behavior. Should've spotted this one when I was adding bounds checks to
the rest of createentity() earlier, but at least it's fixed now.
This makes it easier to add bounds checks to all accesses of
map.explored. Also, all manually-written existing bounds checks have
been removed, because they're going to go into the new getters and
setters.
The getter is mapclass::isexplored() and the setter is
mapclass::setexplored().
It is no longer possible to cause Undefined Behavior via accessing
out-of-bounds room properties.
What happens instead is - if you attempt to fetch an out-of-bounds room
property, you get a "blank" room property that just has all of the
defaults, plus its tileset is 1 because all tilesets that are nonzero
use tiles2.png, and it closely emulates the previous behavior where it
was some bogus value but definitely not zero. Its Direct Mode is also 1,
because the tiles contained within it are just mishmashed repeats of
existing tiles on the map, and we shouldn't autotile that.
The roomname also gets cleared in case the user attempts to set the room
name of an out-of-bounds room property.
If you attempt to set the property of an out-of-bounds room property,
then nothing happens.
This replaces all raw ed.level accesses with new setter and getter
funcs, which makes it easier to add bounds checks later. And I've also
removed all the manually-written bounds checks, since they will go into
the new getter and setter.
To get the room properties of a specific room, you use
editorclass::getroomprop(), which returns a pointer to the room
properties - then you just read off of that pointer. To set a room
property, you use editorclass::setroom<PROP>(), where <PROP> is the name
of the property. These are maintained using X macros to avoid
copy-pasting. editorclass::getroompropidx() is a helper function and
shouldn't be used directly.
This removes all traces of Undefined Behavior from getting and placing
tiles.
This mimics the previous behavior (2.2 and below) as reasonably as
possible. `vmult` was previously a vector, there was a bunch of unused
space directly after the end of the usable space of the vector, which
was all filled with zeroes. The same goes for `contents`, having
previously been a vector, and so having a bunch of zeroes immediately
following the end of the in-bounds space. That's why both are 0 if you
index them out of bounds.
This makes it easier to add bounds checks to all accesses of
ed.contents.
To do this, I've added editorclass::gettile(), editorclass::settile(),
and editorclass::getabstile() (with a helper function of
editorclass::gettileidx() that really shouldn't be used directly), and
replaced all raw accesses of ed.contents with those functions
appropriately.
This also makes the code more readable, as a side effect.
The existing bounds checks were correct sometimes but other times were
not.
The bounds check for 2x2 and 2x1 sprites only covered the top-left
sprite drawn; the other sprites could still be out of bounds. But if the
top-left sprite was out of bounds, then none of the other sprites
wouldn't be drawn - although it ought to be that the other sprites still
get attempted to be drawn. So I've updated the bounds checks
accordingly, and now an out of bounds top-left sprite won't prevent the
drawing of the rest of the sprites.
Similarly, if the sprite of a Gravitron square was out of bounds, that
would prevent its indicators from being drawn. But the indicators
weren't being bounds-checked either (2.3 lets you have less than 1200
tiles in a given tilesheet). So the bounds check has been moved to only
cover the drawframe and the indicator indexes accordingly, and an out of
bounds sprite won't prevent attempting to draw the indicators.
It is possible for any of the QueryIntAttribute()s to fail, most
commonly if the attributes don't exist. If that happens, then that part
of the temporary edentity won't be initialized, and we'll end up having
a partially-uninitialized edentity - then doing much of anything with it
will result in undefined behavior.
To fix this, just initialize the temporary edentity.
If an XML tag doesn't contain anything inside, pText will be NULL. If
that happens without being checked, then NULL will be passed to
SDL_strcmp(). SDL_strcmp() will either call libc strcmp() or use its own
implementation; both implementations will still dereference the NULL
without checking it.
This is undefined behavior, so I'm fixing it. The solution is to do what
is done with all other XML parsing functions, and to make sure pText
gets set to a safe empty string (which is just a pointer to a null
terminator) if it happens to be NULL.
PR #279 added game.gametimer solely for the editor ghosts feature. It
seems that whoever originally wrote it (Leo for the now-dead VVVVVV:
Community Edition, I believe) forgot that the game already had its own
timer, that they could use.
The game timer does increment on unfocus pause (whereas this doesn't),
but that's a separate issue, and it ought to not do that.
So #434 didn't end up solving the deltaframe flashing fully, only
reduced the chances that it could happen.
I've had the Level Complete image flash a few times when the Game Saved
text box pops up. This seems to be because the Level Complete image is
based off of the text box being at y-position 12, and the Game Saved
text box is also at y-position 12. Level Complete only gets drawn if the
text box additionally has a red channel value of 165, and the Game Saved
text box has a red channel value of 174. However, there is a check that
the text box be fully opaque first before drawing special images. So
what went wrong?
Well, after thinking about it for a while, I realized that even though
there is indeed an opaqueness check, the alpha of the text box updates
BEFORE it gets drawn. And during the deltaframes immediately after it
gets updated, the text box is considered fully opaque. It's completely
possible for the linear interpolation to end up with a red channel value
of 165 during these deltaframes, while the text box is opaque as well.
As always, it helps if you have a high refresh rate, and run the game
under 40% slowdown.
Anyways, so what's the final fix for this issue? Well, use the text box
'target' RGB values instead - its tr/tg/tb attributes instead of its
r/g/b attributes. They are not subject to interpolation and so are
completely reliable. The opaqueness check should still be kept, though,
because the target values don't account for opaqueness. And this way, we
get no more deltaframe flashes during text box fades.
An even better fix would be to not use magic RGB values to draw special
images... but that'd be something to do later.
Clang warns on this. This doesn't fix anything but it does ensure that
whoever's reading it won't be focused as to whether or not omitting the
second set of braces is legal or not.
Previously, with the wrong loop order, this kludge needed to exist so
entities in finalmode didn't have wrong colors for 1 frame when entering
a room. But now the loop order has been fixed, and so this kludge is no
longer needed.
In 2.2, at render time, the game rendered screenshakes and flashes if
their timers were above 0, and then decremented them afterwards. The
game would also update the analogue filter right before rendering it,
too.
In 2.3, this was changed so the flash and screenshake timers were
unified, and also done at the end of the frame - right before rendering
happened. This resulted in 1-frame flashes and screenshakes not
rendering at all. The other changes in this patchset don't fix this
either. The analogue filter was also in the wrong order, but that is
less of an issue than flashes and screenshakes.
So, what I've done is made the flash and screenshake timers update right
before the loop switches over to rendering, and only decrements them
when we switch back to fixed functions (after rendering). The analogue
filter is also updated right before rendering as well. This restores
1-frame flashes and screenshakes, as well as restores the correct order
of analogue filter updates.
This reintroduces 2-frame edge-flipping after the 1-frame input delay
got removed. This is because along with processing input and moving
Viridian, logical onground/onroof assignments need to processed in the
same between-render sequence as well - otherwise Viridian only gets 1
frame of edge-flipping due to frame ordering.
I will need to separate these into two different variables because I
will need to move logical onground/onroof assignments to the start of
gamelogic() - if I kept them together, however, that would change the
visuals of onground/onroof, which I want to keep consistent with 2.2.
To do this, GAMEMODE input needs to be processed, and Viridian needs to
be moved, in the same sequence between render frames. So just move
gameinput to after gamerender. Yes, this is not 2.2 order, but gameinput
only handles player input and nothing else - plus a 1-frame input delay
feels really awful to play with in over-30-mode.
In order to re-remove the 1-frame input delay, we will have to poll
input right after rendering a frame - in other words, just before an
input function gets called.
To do this, I've added a new function enum type - Func_input - that is
the same as a fixed function, but before its function gets called,
key.Poll() gets called. And all input functions have been updated to use
this enum accordingly.
This once again fixes the facing directions of crewmates upon room load,
except now it covers more cases.
So, here is the saga so far:
- 2.0 (presumably) to 2.2: crewmate direction fix is special-cased at
the end of mapclass::loadlevel(). Only covers crewmates created during
the room load, does not cover crewmates created from scripts, only
covers state 18 of crewmates.
- 2.3 currently (after #220): crewmate direction fix is moved to
entityclass::createentity(), which covers every avenue of crewmate
creation (including from scripts), but still only covers state 18.
- This commit: crewmate direction fix now covers every possible state of
the crewmate, also does not copy-paste any code.
What I've done instead is to make it so createentity() will immediately
call updateentities() on the pushed-back entity. This is kludge-y, but
is completely okay to do, because unlike other entities, crewmate
entities never change their state or have any side-effects from
double-evaluation, meaning calling updateentities() on them is
idempotent and it's okay to call their updateentities() more than once.
This does have the slight danger that if the states of crewmates were to
change in the future to no longer be idempotent, this would end up
resulting in a somewhat hard-to-track-down double-evaluation bug, but
it's worth taking that risk.
This fix is not applied to entity 14 (the supercrewmate) because it is
possible that calling updateentities() on it will immediately remove the
entity, which is not idempotent (it's changing the state of something
outside the object). Supercrewmates are a bit difficult to work with
outside of the main game anyways, and if you spawn them you could
probably just use the changedir() script command to fix their direction,
so I'm not inclined to fix this for them anyway.
This copy-pasted code only existed because the previous loop order was
incorrect and rendered entities before they would get properly updated
by the fixed render function. Now, the fixed render function is
guaranteed to be called before the render function, so we can rely on
that to update the drawframe and realcol of entities instead of
duplicating the code ourselves in createentity().
The drawframe assignment is still kept to fix the case where dying while
completestop is active (i.e. during a trinket or crewmate rescue
cutscene) and respawning in a different room won't turn everything into
Viridian sprites.
The background would change for 1 frame before sending you back to the
pause menu or editor settings. The map.nexttowercolour() call needs to
be deferred until the end of the frame.
The new loop order introduces a glitch where the menu would display
whichever menu was saved to kludge_ingametemp for 1 frame right as the
user returned to the pause menu. This happened because the
game.returntomenu() happens in titleinput(), which comes before
titlerender(). To fix this, we just need to defer it to the end of the
frame.
game.shouldreturntoeditor was added to fix a frame ordering issue that
was causing a bug where if you started playtesting in a room with a
horizontal/vertical warp background, and exited playtesting in a
different room that also had a horizontal/vertical warp background and
which was different, then the background of the room you exited in would
slowly scroll offscreen, when you re-entered the editor, instead of the
background consisting entirely of the actual background of the room.
Namely, the issue was that the game would render one more frame of
GAMEMODE after graphics.backgrounddrawn got set to false, and re-set it
to true, thus negating the background redraw, so the editor background
would be incorrect.
With defer callbacks, we can now just use a couple lines of code,
instead of having to add an extra kludge variable and putting handling
for it all over the code.
Sometimes, there needs to be code that gets ran at the end of the game
loop, otherwise rendering issues might occur. Currently, we do this by
special-casing each deferred routine (e.g. shouldreturntoeditor), but it
would be better if we could generalize this deference instead.
Deferred callbacks can be added using the DEFER_CALLBACK macro. It takes
in one argument, which is the name of a function, and that function must
be a void function that takes in no arguments. Also, due to annoying C++
quirks, void functions taking no arguments cannot be attributes of
objects (because they have an implicit `this` parameter), so it's
recommended to create each callback separately before using the
DEFER_CALLBACK macro.
Otherwise, the player would appear to "zip" during the deltaframes
between their previous position and their new position. This did not
happen in the previous game loop order and only happens in the new one.
Previously, before the game loop order got fixed, going to the in-game
settings would switch over to the new render function too early, causing
a deltaframe glitch that had to be fixed. But now, the render function
only gets switched when the current gamestate's function list gets
finished executing, so the game won't suddenly switch to titlerender()
in the middle of the ACTION press to the in-game settings screen.
As a consequence, titleupdatetextcol() no longer needs to be exported to
Input.cpp.
The previous location of this loop was placed there because it happened
just after the end of the render function. Now that the loop order is
fixed, the first thing that happens after the render function is the
start of gamelogic(), so this loop should go there now, else entity
positions won't be interpolated.
Also it now preincrements instead of postincrements because I like
preincrements.
Okay, so the reason why all render functions were moved to the end of
the frame in #220 is because it's simpler to call two fixed functions
and then a delta function instead of one fixed function, then a delta
function, and then another fixed function.
This is because fixed functions need special handling inside
deltaloop(), and you can't simply duplicate this handling after calling
a delta function. Oh, and to make matters worse, it's not always
fixed-delta-fixed, sometimes (like in MAPMODE and TELEPORTERMODE) it's
delta-fixed-fixed, so we'd need to handle that somehow too.
The solution here is to generalize the game loop and factor out each
function, instead of hardcoding it. Instead of having hardcoded
case-switches directly in the loop, I made a function that returns an
array of functions for a given gamestate, along with the number of
functions, then the game loop processes it accordingly. In fixedloop(),
it iterates over the array and executes each function until it reaches a
delta function, at which point it stops. And when it reaches the end of
the array, it goes back to the start of the array.
But anyway, if it gets to a delta function, it'll stop the loop and
finish fixedloop(). Then deltaloop() will call the delta function. And
then on the next frame, the function index will be incremented again, so
fixedloop() will call the fixed functions again.
Actually, the previous game loop was actually made up of one big loop,
with a gamestate function loop nested inside it, flanked with code that
ran at the start and end of the "big loop". This would be easy to handle
with one loop (just include the beginning and end functions with the
gamestate functions in the array), except that the gamestate functions
could suddenly be swapped out with unfocused functions (the ones that
run when you unfocus the window) at any time (well, on frame boundaries,
since key.isActive only got checked once, guarding the entire "inner
loop" - and I made sure that changing key.isActive wouldn't immediately
apply, just like the previous game loop order) - so I had to add yet
another layer of indirection, where the gamestate functions could
immediately be swapped out with the unfocused functions (while still
running the beginning and end code, because that was how the previous
loop order worked, after all).
This also fixes a regression that the game loop that #220 introduced
had, where if the fixed functions switched the gamestate, the game would
prematurely start rendering the gamestate function of the new gamestate
in the deltaframes, which was a source of some deltaframe glitches. But
fixing this is likely to just as well cause deltaframe glitches, so it'd
be better to fix this along with fixing the loop order, and only have
one round of QA to do in the end, instead of doing one round after each
change separately.
Fixes #464... but this isn't the end of the patchset. There are bugs
that need to be fixed, and kludges that need to be reverted.
Y-position 180 would be the position of the Level Complete and Game
Complete special text boxes in Flip Mode. However, since the y-position
of flipme text boxes actually no longer change (because we have to
accomodate changing Flip Mode on-the-fly), these text boxes will never
actually be y-position 180 - so we should remove these checks for
clarity.
A-ha! I've spotted an inconsistency! The normal trinket collection text
boxes (gamestate 1000-1003) is aware of Flip Mode, and will position
themselves accordingly to read the correct way in Flip Mode. However,
foundtrinket() doesn't do this.
Well, now it does.
This is why the text box attribute was named flipme, after all.
You may have noticed that the flipme command inverts textflipme instead
of simply setting it to true. Well, that's because it should be the same
as the previous behavior, which was essentially to invert it instead of
setting it to true - i.e. calling flipme twice would keep the original
text box position in Flip Mode, which means it would be upside-down
(this is a lot of flipping to keep track of...) - because flipme added
to texty in-place instead of simply assigning to it. (It did the
calculation incorrectly in 2.2 and previous, but I digress.)
Similarly, textflipme is not reset in hardreset(), because none of the
other script text box variables are reset either.
This ensures that if the player decides to toggle Flip Mode while one of
these text boxes is up, they won't be oriented improperly. Additionally,
it also de-duplicates a bunch of Flip Mode check code, which is also a
win.
createtextboxreal() is the same as createtextbox(), but with a flipme
parameter added to create text boxes that have their flipme attribute
set to true. createtextbox() just calls createtextboxreal() with flipme
set to false, and createtextboxflipme() just calls createtextboxreal()
with flipme set to true; this is because I do not want to use C++
function overloading.
Instead of calculating the y-position of the text box when it's created,
we will store a flag that says whether or not the text box should be
flipped in Flip Mode (and thus stay right-side-up), and when it comes
time to draw the text box, we will check Flip Mode and calculate the
position then.
Instead of duplicating the same variables over and over again,
Graphics::drawgui() can just make its own SDL_Rect. It's not that hard.
As far as I can tell, textrect was always being properly kept up to date
by the time Graphics::drawgui() got around to rendering
(textboxclass::resize() keeps being called a LOT), so this shouldn't be
a noticeable change from the user perspective.
The "Game Saved" text box, along with its associated telesave() call,
exists in both Game.cpp and Script.cpp, so one of them is the copy-paste
of the other. Unfortunately this copy-paste resulted in an inconsistency
where both of them don't check for the same things when deciding whether
or not the telesave should actually happen (this is why you don't
copy-paste, kids... it's scary!).
Either way, de-duplicating this now is less work for me later.
Every Level Complete sequence is the same copy-pasted thing, but with
minor changes. To make my work easier, I'm de-duplicating them so I have
less text boxes to change later, and less grind to grind.
These default arguments are never used anywhere. And if they were used
anywhere, it'd be better to explicitly say 255,255,255 than make readers
have to look at the header file to see what these default to. Also, this
creates four different overloads of createtextbox(), instead of only
two - but we ought to not be using function overloading anyway.
These commented-out code blocks just get in the way of clarity when I'm
refactoring flipped textboxes created in the gamestate system. So I'm
getting rid of them. If we need them back, we always have Git history.
Since the only difference is the y-positions, I've decided to remove the
copy-pasted code. A better solution would be to have a function that
draws multiline text and handles it accordingly in Flip Mode, but that
could be done later.
The only difference between Flip Mode and normal mode is the y-position
and sprite used to draw the crewmates. Everything else is the same, so
I've removed the copy-pasted portion.
The diff might look a bit ugly due to the unindentation.
Since the only difference in Flip Mode is the positiveness/negativeness
of the iterator variable, plus the starting y-offset, I've removed the
copy-pasted code and did this instead.
The diff might look a bit ugly due to the unindentation.
Like cutscene bars, I've added Graphics::setfade(), to ensure that no
deltaframe rendering glitches happen due to oldfadeamount not being
updated properly.
And indeed, this fixes a deltaframe rendering glitch that happens if you
return to the editor from playtesting on a faded-out screen, then fade
out again (by either re-entering playtesting and then cause a fadeout to
happen again, or by quitting from the editor afterwards). The same
glitch also happens outside of in-editor playtesting if you exit to the
menu while the screen is faded out.
To do this, I've added Graphics::setbars(), to make sure
oldcutscenebarspos always gets assigned when cutscenebarspos is. This
fixes potential deltaframe rendering issues if these two mismatch.
While working on #535, I noticed that editormenuactionpress() still
didn't do the explicit void declaration. Then I ran `rg 'void.*\(\)'`
and found three other functions that I somehow missed in #628. Whoops.
Well, now they no longer are missed.
This is a small quality-of-life tweak that makes it so if you're in the
middle of editing a level, you don't have to save the level, exit to the
menu, change whatever setting you wanted, re-enter the editor, and type
in the level name, just to change one setting. This is the same as
adding Graphic Options and Game Options to the in-game pause menu,
except for the editor, too.
To do this, I'm reusing Game::returntopausemenu() (because all of its
callers are the same callers for returning to editor settings) and
renamed it to returntoingame(), then added a variable named
ingame_editormode to Game. When we're in the options menus but still in
the editor, BOTH ingame_titlemode and ingame_editormode will be true.
This is a small quality-of-life thing that makes it so you don't have to
move your menu selection all the way over to the "return" button in
order to return to the previous menu. You can just press Escape instead
to return to the previous menu. The previous behavior of pressing Escape
was to bring up the 'confirm quit' menu, or if you were in an options
menu in-game, return to the pause menu.
If you're on the main menu (and thus don't have any previous menu) and
press Escape, the game will instead bring up the 'confirm quit' menu.
For consistency, the "quit game" option on the main menu will also bring
up the 'confirm quit' menu as well, instead of immediately closing the
game.
Pressing the controller button mapped to Escape will also work as well.
The only menus that don't have return buttons are the 'countdown' menus
- so the game will not let you press Escape if there's a menu countdown
happening.
Now that pressing Escape in the 'continue' menu will just bring you back
to the 'play' menu, there's no need to specifically put
map.nexttowercolour() first when canceling the 'confirm quit' menu.
As part of my work in #535, I've noticed that 2.3 currently with 2.2
loop order doesn't have interpolated cutscene bars. This is because
cutscene bars in 2.3 get updated at the start of the frame, which
interpolates them correctly until the render functions are put in their
proper place.
There is, however, a somewhat bigger issue, outside the scope of #535,
where cutscene bars always get updated regardless of which gamemode you
are in. Previously in 2.2 and previous, cutscene bars only got updated
in GAMEMODE and TELEPORTERMODE; sometime during 2.3, the cutscene bars
timer got pulled out of all the individual game modes and moved to the
very start of the loop. (I was probably the one who did this change;
I've been caught in a trap of my own devising.)
Thus, going to MAPMODE during the cutscene bars animation doesn't keep
their position paused like it would in 2.2. This is also categorically a
more-than-visual change, since the untilbars() script command depends
on the cutscene bars timer. I see no reason for the cutscene bars to
behave differently in this way than 2.2; #535 would also end up doing
the same fix more-or-less anyway.
Since TELEPORTERMODE currently uses the same renderfixed function as
MAPMODE, I've had to add a teleporterrenderfixed() that just calls
maprenderfixed(), but also does the cutscene bars timer.
As a partial fix for #618, adding the SDL2 version number to the README
will clarify that you need a specific version of SDL2 in order to
compile (and run) the current version of the game (2.3 at the time of
writing); in the future, the SDL2 dependency will be upgraded with each
SDL release.
This is to avoid error messages that complain about missing symbols like
SDL_zeroa() (added in SDL 2.0.14) not being present at the time of
compilation.
Closes#626.
This moves the responsibility of toggling fullscreen when any of the
three toggle fullscreen keybinds are pressed (F11, Alt+Enter, Alt+F)
directly into key.Poll() itself, and not its caller (which is main() -
more specifically, fixedloop()). Furthermore, the fullscreen toggle
itself has been moved to a separate function that key.Poll() just calls,
to prevent cluttering key.Poll() with more business logic (the function
is already quite big enough as it is).
As part of my work in re-removing the 1-frame input delay in #535, I'm
moving the callsite of key.Poll() around, and I don't want to have to
lug this block of code around with it. I'd rather refactor it upfront
than touch any more lines than necessary in that PR.
This fixes a bug where the resumemusic() script command would always
play MMMMMM track 15 (or, if you're using PPPPPP, just not work). This
is because musicclass::haltdasmusik() assigns resumesong AFTER calling
Mix_HaltMusic(), but the songend() callback fires before the resumesong
assignment, meaning resumesong gets set to -1 instead of whatever
currentsong was previously.
To fix this, just move the assignment into the callback itself (I don't
know why this wasn't done before). I could have moved it to before the
Mix_HaltMusic() call, but moving it into the callback itself fixes it
for all cases of the music stopping (such as when the music fades out).
This avoids the room name awkwardly moving back up if the cursor is at
the bottom of the screen in a room with a room name, then the user
switches to a room without a room name, then moves the cursor away from
the bottom, then switches to a named room - even though the cursor was
already away from the bottom of the screen.
Conversely, if the user moves their cursor to the bottom of the screen
in an unnamed room, then switches into a named room, the room name will
already have been hidden and they won't need to wait for it to hide.
This fixes the drawer suddenly popping up only to disappear, if the user
leaves a Direct Mode room into a non-Direct Mode room when the drawer
hasn't closed all the way, and then re-enters a Direct Mode room.
Gravity line correction no longer happens on every deltaframe. This
means less CPU time is wasted. Although, there's probably no need to
correct gravity lines on every single frame... hm... well, that's an
optimization for later (there's plenty of other stuff to cache, like
minimap drawing or editor foreground drawing).
Since it only ever gets assigned from FILESYSTEM_getUserSaveDirectory(),
and that function returns a C string, and the variable is only ever read
from again, this doesn't need to be an std::string.
In #553, when Dav999 added error messages to settings menus if the game
was unable to successfully save the changed settings, he seemed to have
forgotten the PPPPPP/MMMMMM toggle option.
However, I can fully blame him for only that miss. The Flip Mode options
were using game.savemystats (which was removed in #591), so if he
searched for all instances of game.savestats()
(game.savestatsandsettings() was only added in #557), he would've missed
the game.savemystats.
Later, when I did #591, I didn't realize that I should've replaced the
ones in the Flip Mode options with game.savestatsandsettings_menu(), so
part of the blame does fall on me.
Anyways, this is fixed now.
If there was absolutely no music playing, and you went to the in-game
options to switch between MMMMMM and PPPPPP, the behavior would be a bit
glitchy.
If you started with PPPPPP, switching once to MMMMMM wouldn't play
anything, but then switching back to PPPPPP would play MMMMMM track 15.
Then switching back to MMMMMM wouldn't do anything, but then switching
back to PPPPPP again would play PPPPPP track 15 - and from there, the
behavior is stable.
If you started with MMMMMM, switching once to PPPPPP would play MMMMMM
track 15. Then switching back to MMMMMM wouldn't do anything, but then
switching back to PPPPPP would play PPPPPP track 15 - and as above, the
behavior is stable after that.
Anyways, the point is, -1 shouldn't be passed to musicclass::play()
unless you want glitchy things. And I'm not patching -1 out of
musicclass::play() itself, because passing negative numbers results in a
useful glitch (that's existed since 2.2) where you can play MMMMMM
tracks while having PPPPPP selected, effectively doubling the amount of
usable music tracks within a custom level; it also seems like the game
does -1 checks elsewhere, so I'm just being consistent with the rest of
the game (although, yes, I am technically single-case patching this).
I ran Include What You Use on the file, and a BUNCH of transitive
includes showed up.
colourTransform is used in the file, so GraphicsUtil.h needs to be
included. libc floor() is used in the file, so math.h needs to be
included (I'm removing this next...). NULL is used, so stddef.h. And
stdlib.h is used because we use rand() directly instead of going through
fRandom(). Speaking of which, we use fRandom(), so Maths.h needs to be
included, too.
So, 2.3 added recoloring one-way tiles to no longer make them be always
yellow. However, custom levels that retexture the one-way tiles might
not want them to be recolored. So, if there are ANY custom assets
mounted, then the one-ways will not be recolored. However, if the XML
has a <onewaycol_override>1</onewaycol_override> tag, then the one-way
will be recolored again anyways.
When I added one-way recoloring, I didn't intend for any custom asset to
disable the recoloring; I only did it because I couldn't find a way to
check if a specific file was customized by the custom level or not.
However, I have figured out how to do so, and so now tiles.png one-way
recolors will only be disabled if there's a custom tiles.png, and
tiles2.png one-way recolors will only be disabled if there's a custom
tiles2.png.
In order to make sure we're not calling PhysFS functions on every single
deltaframe, I've added caching variables, tiles1_mounted and
tiles2_mounted, to Graphics; these get assigned every time
reloadresources() is called.
This function will check if a specific file is a mounted per-level
custom asset, instead of being a variable that's true if ANY file is a
mounted asset.
Now you only have to call one function (and pass it a tile number) to
figure out if you should recolor a one-way tile or not, and you don't
have to copy-paste.
It's only used in FileSystemUtils and never anywhere else, especially
not Graphics. Why is this on Graphics again?
It's now a static variable inside FileSystemUtils. It has also been
renamed to assetDir for consistency with saveDir and levelDir. Also,
it's a C string now, and is no longer an STL string.
There's no need to create an std::string for every single element just
to see if it's a key name.
At least in libstdc++, there's an optimization where std::strings that
are 16 characters or less don't allocate on the heap, and instead use
the internal 16-char buffer directly in the control structure of the
std::string. However, it's not guaranteed that all the element names
we'll get will always be 16 chars or less, and in case the std::string
does end up allocating on the heap, we have no reason for it to allocate
on the heap; so we should just convert these string comparisons to C
strings instead.
This bug is technically NOT a regression - the code responsible for it
has been around since the source release.
However, it hasn't been a problem until Graphic Options and Game Options
were added to the pause screen. Since then, if you opened the pause menu
in Flip Mode, pressing up would move to the menu option below, and
pressing down would move to the menu option above. Notably, left and
right still remain the same.
This is because the map screen input code assumes that the menu options
will be flipped around - however, this has never been the case. What
happens instead is that the menu options get flipped around time when in
Flip Mode - flipping what's already flipped - so it ends up the same
again.
(Incidentally enough, the up/down reversing code is present on the title
screen, and is correct - if you happen to set graphics.flipmode to true
on the title screen, the title screen doesn't negate the flipped menu
options, so pressing up SHOULD be treated like pressing down, and vice
versa. However, in 2.3, it's not really possible to set
graphics.flipmode to true on the title screen without using GDB or
modifying the game. In 2.2 and previous, you can just complete the game
in Flip Mode, and the variable won't be reset; 2.3 cleaned up all exit
paths to the menu to make sure everything got reset.)
This isn't a problem when there's only two options, but since 2.3 adds
two more options to the pause screen, it's pretty noticeable.
Anyway, this is fixed by simply removing the branch of the
graphics.flipmode if-else in mapinput(). The 'else' branch is now the
code that gets executed unconditionally. Don't get confused by the diff;
I decided to unindent in the same commit because it's not that many
lines of code.
This fixes a "root cause" bug (that's existed since 2.2 and below) where
recreated surfaces wouldn't preserve the blend mode of their original
surface.
The surface-level (pun genuinely unintended) bug that this root bug
fixes is the one where there's no background to the room name during the
map menu animation in Flip Mode.
This is because the room name background relies on graphics.backBuffer
being filled with complete black. This is achieved by a call to
ClearSurface() - however, ClearSurface() actually fills it with
transparent black (this is not a regression; in 2.2 and previous, this
was an "inlined" FillRect(backBuffer, 0x00000000)). This would be okay,
and indeed the room name background renders fine in unflipped mode - but
it suddenly breaks in Flip Mode.
Why? Because backBuffer gets fed through FlipSurfaceVerticle(), and
FlipSurfaceVerticle() creates a temporary surface with the same
dimensions and color masks as backBuffer - it, however, does NOT create
it with the same blend mode, and kind of sort of just forgets that the
original was SDL_BLENDMODE_NONE; the new surface is SDL_BLENDMODE_BLEND.
Thus, transparency applies on the new surface, and instead of the room
name being drawn against black, it gets drawn against transparency.
Here I'm using "surface recreation" to mean allocating a new surface
with almost the exact same properties as a given previous. As you can
see, GraphicsUtil likes to recreate surfaces all the time - copying the
masks and flags (unused lol) of an existing surface - and only varies it
by the dimensions of the new surface.
As you can see, this is a lot less wordy and a lot less repetitive than
copy-pasting it a bunch.
In normal mode, the room name is at the bottom of the screen. When you
bring up the map screen, it appears as if the room name is moving up
from the bottom of the screen, and the map screen is "pushing" it up.
The effect is pretty seamless, and when I first played the game (back in
2014), I thought it was pretty cool.
However, in Flip Mode, the room name is at the top of the screen. So one
would expect the menu animation to come from above the screen. Well, no,
it still goes from the bottom of screen; ruining the effect because it
seems like there are two room names on the screen, when there ought to
be only one.
To be fair, I only noticed this while fixing another bug now, but it's
one of those things you can't unsee (I have cursed you with knowledge!);
not to mention that I probably only didn't notice this because I don't
play in Flip Mode that often (and I'd wager almost no one does; Flip
Mode previous to 2.3 seems to have been really untested, like I said
in #165). It feels like a bit of an oversight that the direction of the
animation is the same direction as in unflipped mode. So I'm fixing
this.
If you stood in two activity zones at once, you'll automatically select
the one that got created first. And when you activated it, the activity
zone prompt would switch to fading out the prompt of the OTHER activity
zone, the one you didn't activate.
This wasn't a problem in 2.2 and previous, because the fading animation
was simply bugged and defaulted to being solid black. However, in 2.3,
the fading animation is fixed, so this is possible.
Also, this really only happens in the main game. Since there's only one
type of useful activity zone in custom levels - namely the terminal
activity zone - if two activity zones did happen to overlap, activating
one of them wouldn't result in visibly fading out a different activity
zone (because they both look the same); furthermore custom level makers
are careful to not overlap terminal activity zones, lest this result in
player confusion; furthermore the placed activity zones only cover a
small area, whereas in the main game, crewmates' activity zones are
pretty big.
(Technically, you CAN create main game activity zones in custom levels,
but those are hardcoded to call main game scripts, and basically nobody
uses them.)
So what's the solution? Simply adding game.hascontrol and script.running
checks to the updating of game.activity_last[prompt|r|g|b].
Why not add those checks to the assignment of game.activeactivity, just
above? Because that would introduce a frame ordering issue (that
would NOT be (automatically) fixed by #535) where the eligibility of
pressing Enter on an activity zone now checks if you were standing in an
activity zone LAST frame, and not THIS frame. (I tested this with
libTAS.) Better to fiddle with the rendering code than fiddle with the
actual physics code.
The specific spot I used to test this was standing in Violet's activity
zone and the activity zone of the ship radio terminals (the three
terminals on the ground in her room); the ship radio terminals are
first-placed, so if you're testing this (and you should!), make that the
prompt is of the ship radio activity zone before activation.
This probably should've been moved to RenderFixed a while ago, because
it's unnecessary to run this on every single deltaframe.
The only minor wrinkle here is that this means rendering of activity
zone fades will be delayed for 1 frame, but #535 will fix that.
Since you're now allowed to bring up the map screen during cutscenes,
you've also been able to activate activity zones and teleporter prompts
during cutscenes. This only really affects custom levels; nowhere in the
main game can you overlap with an activity zone while in a cutscene.
To fix this, I've just added a script.running check to Enter keybind
processing.
I was looking through all calls to game.returnmenu(), and I noticed that
the return option in the game pad screen didn't have a
map.nexttowercolour(). I tested it and, yep, returning from there
doesn't update the background color.
So that should be fixed now.
I'm... not sure why this was here? It's absolutely not needed.
I'm guessing maybe at one point during development, there might have
been wanted a special song to be played during the credits, or no song
at all (although the function being niceplay() instead of play() seems
to support the first possibility) - but there's no need for this to be
here.
Now that recreating the same menu keeps currentmenuoption, we can remove
all these superfluous assignments. This means repeating ourselves less;
in case the option numbers change in the future, we won't have to
remember to update these reassignments, too.
When recreating the same menu, there's basically no reason to reset the
currently-selected menu option. (Also, no need to worry about indexing
out of bounds or anything - the number gets checked while iterating over
all menu options; it's never used to actually index anything. At worst
there might be a 1-frame flicker as the bounds code in gameinput() kicks
in, but that shouldn't happen anyways.)
Zip files that have been successfully mounted in editorclass::loadZips()
will now be ignored when the game does its second pass over the levels
directory. Otherwise, this would produce a superfluous error message,
because the game would attempt to parse the zip file as a level file
(when it's not a level file and is in fact a binary file).
This returns if the file given is mounted or not. 2.3 added level zip
support, so whenever the game loads level metadata, it will mount any
zip files in the levels directory; this function can be used to check if
any of those files have been mounted, and ignore them if so.
Otherwise, this would produce a superfluous warning message in the
console. Directories are now ignored and never attempted to be opened;
so now any warning messages printed out are genuine file that something
has genuinely gone wrong with.
Well, there's still a warning message printed if there's a symlink to a
directory; this is rarer, but it's still a false positive.
This function will be used to differentiate files from directories.
Or at least that was the hope. Symlink support was added in 2.3, but it
doesn't seem like PHYSFS_stat() lets you follow the symlink to check if
what it points to is itself a file or directory. And there doesn't seem
to be any function to follow the symlink yourself...
So for now, this function considers symlinks to directories to be files.
PHYSFS_readBytes() returns a PHYSFS_sint64, but we forcefully shove it
into a 32-bit signed integer.
Fixing the type of this doesn't have any immediate consequences, but
it's good for the future in case we want to use the return value for
files bigger than 2 gigabytes; it doesn't harm us in any way, and it's
just better housekeeping.
PHYSFS_fileLength() returns -1 if the file size can't be determined. I'm
going to set it to 0 instead, because it seems like that's more
well-behaved with consumers.
Take lodepng_decode24() or lodepng_decode32(), for example - from a
quick glance at the source, it only takes in a size_t (an unsigned
integer) for the filesize, and one of the first things it does is malloc
with the given filesize. If the -1 turns into SIZE_MAX and LodePNG
attempts to allocate that many bytes... well, I don't know of any
systems that have 18 exabytes of memory. So that seems pretty bad.
The function returns a PHYSFS_sint64, but we forcefully shove it into a
PHYSFS_uint32. This means we throw away all the negative numbers, which
is bad because the function returns -1 if the size of the file can't be
determined; plus, we also throw away 32 bits of information, reducing
our range of supported file sizes from 9 exabytes to 4 gigabytes.
File size support is only as good as the weakeast link, and it looks
like one of the consumers of FILESYSTEM_loadFileToMemory(),
SDL_RWFromConstMem(), only takes in a signed 32-bit integer of size;
however, I would still like to do at least the bare minimum to support
as many file sizes as we can, and changing types around is one of those
bare minimums.
I had misread this line in #629 and thought that it was just clearing
the entire surface, when really it was filling the surface with opaque
black. ClearSurface() would instead make it transparent, which would
mean when it got drawn, it would get drawn against blue, and not black.
Whoops.
These float attributes are assigned to, and then never read again. The
coordinate systems of blocks are a bit of a mess - some use xp/yp, some
use xp/yp and rect.x/rect.y - but I can confidently say that these are
never used, because it compiles fine if I remove the attributes from the
class, plus remove all assignments to it.
Screen.cpp wasn't explicitly including SDL.h, instead relying on
Screen.h to include it.
It was also relying on SDL.h to include stdio.h on Linux, which breaks
because SDL.h doesn't include stdio.h on Windows. So stdio.h is now
explicitly included as well.
stdlib.h is not used in this file.
After reasoning about it for a bit, there's no reason for these checks
to be here. `zip_normal` will either be
/home/infoteddy/.local/share/VVVVVV/levels if the asset directory is a
directory, or levels/levelname.zip if the asset directory is inside the
same zip as the level is. I don't see how they could ever be data.zip.
My guess is because of the VCE bug where it messed up its search path,
and before that bug was fixed, it had to be worked around here by
explicitly blacklisting data.zip here. When the assets mounting stuff
was ported from VCE to vanilla, vanilla didn't have the problem, and so
this data.zip blacklisting stuff was unnecessary.
Either way, I see no reason for this, so I'm going to remove it.
There is no need to use heap-allocated strings here, so I've refactored
them out. I've also cleaned up both of the functions a bit, because the
line spacing of the previous version was completely non-existent, brace
style was same-line instead of next-line, and the variable names were a
bit misleading (in FILESYSTEM_mountassets(), there is a `zippath` AND a
`zip_path`, which are two completely different variables).
Also, FILESYSTEM_mount() now prints an error message and bails if
PHYSFS_getRealDir() returns NULL, whereas it didn't do that before.
The function is literally just an alias for PHYSFS_exists(), which does
not exclusively check for directories. Plus, the function is also used
to check if a non-directory file exists. Why is this function named
"directoryExists"?!
The info message when a .data.zip file is mounted is now differentiated
from the message when an actual directory is mounted (the .data.zip
message specifies ".data.zip").
The error message for an error occurring when loading or mounting a .zip
is now capitalized.
The "Custom asset directory does not exist" now uses puts(), because
there's no need to use printf() here.
I don't know why this is here; it's unused. I don't know why the
compiler doesn't warn about this being unused either - maybe it's
secretly being used? That also means I'm not sure if the compiler is
optimizing this away or not. Anyway, this is getting removed.
The STL here cannot be completely eliminated (because the custom entity
object uses std::string), but at least we can avoid unnecessarily making
std::strings until the very end.
There's not really any reason for this function to use heap-allocated
strings. So I've refactored it to not do that.
I would've used SDL_strrstr(), if it existed. It does not appear to
exist. But that's okay.
PhysFS by default just uses system malloc(), realloc(), and free(); it
provides a way to change them, with a struct named PHYSFS_Allocator and
a function named PHYSFS_setAllocator().
According to PhysFS docs, this function should be called before
PHYSFS_init(), which is why this allocator stuff is handled in
FileSystemUtils.cpp.
Also, I've had to make two "bridge" functions, because PHYSFS_Allocator
wants pointers to functions taking in `PHYSFS_uint64`s, not `size_t`s.
ClearSurface() is less verbose than doing it the old way, and also
conveys intent clearer. Plus, some of these FillRect()s had hardcoded
width and height values, whereas ClearSurface() doesn't - meaning this
change also has better future-proofing, in case the widths and heights
of the surfaces involved change in the future.
When you pass NULL in for the SDL_Rect* parameter to SDL_FillRect(), SDL
will automatically fill the entire surface with that color. There's no
need for us to create the SDL_Rect ourselves.
This is a function that does what it says - it clears the given surface.
This just means doing a FillRect(), but it's better to use this function
because it conveys intent better.
This is pretty old commented-out code from earlier versions of the game;
they are no longer useful, and are just distracting. If we need them, we
can always refer back to this commit (but I sincerely doubt that we'll
need them).
Apparently in C, if you have `void test();`, it's completely okay to do
`test(2);`. The function will take in the argument, but just discard it
and throw it away. It's like a trash can, and a rude one at that. If you
declare it like `void test(void);`, this is prevented.
This is not a problem in C++ - doing `void test();` and `test(2);` is
guaranteed to result in a compile error (this also means that right now,
at least in all `.cpp` files, nobody is ever calling a void parameter
function with arguments and having their arguments be thrown away).
However, we may not be using C++ in the future, so I just want to lay
down the precedent that if a function takes in no arguments, you must
explicitly declare it as such.
I would've added `-Wstrict-prototypes`, but it produces an annoying
warning message saying it doesn't work in C++ mode if you're compiling
in C++ mode. So it can be added later.
One of these days, I need to get around to running Include What You Use
on this codebase. Until then, while I was working on #624, I noticed
these; I'm removing them now.
The recently released SDL 2.0.14 adds a native function for opening URIs
from the host system, superseding the OS-specific implementations of
FILESYSTEM_openDirectory.
This fixes a regression where moving platforms had no collision. Because
their width and height would be maintained, but their type would be -1.
(Also because I didn't test enough.)
In #565, I decided to set blocks' types to -1 when disabling them, to be
a bit safer in case there was some code that used block types but not
their width and heights. However, this means that when blocks get
disabled and re-created in the platform update loops, their types get
set to -1, which effectively also disables their collision.
In the end, I'll just have to compromise and remove setting blocks to
type -1. Because in a better world, we shouldn't be destroying and
creating blocks constantly just to move some platforms - however, fixing
such a fundamental problem is beyond the scope of at least 2.3 (there's
also the fact that this problem also results in some bugs that are a
part of compatibility, whether we like it or not). So I'll just remove
the -1.
next_split_s() could potentially commit out-of-bounds indexing if the
amount of source data was bigger than the destination data.
This is because the size of the source data passed in includes the null
terminator, so if 1 byte is not subtracted from it, then after it passes
through the VVV_min(), it will index 1 past the end of the passed buffer
when null-terminating it.
In contrast, the other argument of the VVV_min() does not need 1
subtracted from it, because that length does not include a null
terminator (next_split() returns the length of the substring, after all;
not the length of the substring plus 1).
(The VVV_min() here also shortens the range of values to the size of an
int, but we'll probably make size_t versions anyway; plus who really
cares about supporting massively-sized buffers bigger than 2 billion
bytes in length? That just doesn't make sense.)
If PHYSFS_enumerate() isn't successful, we now print that it wasn't
successful, and print the PhysFS error message. (We should get that
logging thing going sometime...)
Note that level dir listing still uses plenty of STL (including the end
product - the `LevelMetaData` struct - which, for the purposes of 2.3,
is okay enough (2.4 should remove STL usage entirely)); it's just that
the initial act of iterating over the levels directory no longer takes
four or SIX(!!!) heap allocations (not counting reallocations and other
heap allocations this patch does not remove), and no longer does any
data marshalling.
Like text splitting, and binary blob extra indice grabbing, the current
approach that FILESYSTEM_getLevelDirFileNames() uses is a temporary
std::vector of std::strings as a middleman to store all the filenames,
and the game iterates over that std::vector to grab each level metadata.
Except, it's even worse in this case, because PHYSFS_enumerateFiles()
ALREADY does a heap allocation. Oh, and
FILESYSTEM_getLevelDirFileNames() gets called two or three times. Yeah,
let me explain:
1. FILESYSTEM_getLevelDirFileNames() calls PHYSFS_enumerateFiles().
2. PHYSFS_enumerateFiles() allocates an array of pointers to arrays of
chars on the heap. For each filename, it will:
a. Allocate an array of chars for the filename.
b. Reallocate the array of pointers to add the pointer to the above
char array.
(In this step, it also inserts the filename in alphabetically -
without any further allocations, as far as I know - but this is a
COMPLETELY unnecessary step, because we are going to sort the list
of levels by ourselves via the metadata title in the end anyways.)
3. FILESYSTEM_getLevelDirFileNames() iterates over the PhysFS list, and
allocates an std::vector on the heap to shove the list into. Then,
for each filename, it will:
a. Allocate an std::string, initialized to "levels/".
b. Append the filename to the std::string above. This will most
likely require a re-allocation.
c. Duplicate the std::string - which requires allocating more memory
again - to put it into the std::vector.
(Compared to the PhysFS list above, the std::vector does less
reallocations; it however will still end up reallocating a certain
amount of times in the end.)
4. FILESYSTEM_getLevelDirFileNames() will free the PhysFS list.
5. Then to get the std::vector<std::string> back to the caller, we end
up having to reallocate the std::vector again - reallocating every
single std::string inside it, too - to give it back to the caller.
And to top it all off, FILESYSTEM_getLevelDirFileNames() is guaranteed
to either be called two times, or three times. This is because
editorclass::getDirectoryData() will call editorclass::loadZips(), which
will unconditionally call FILESYSTEM_getLevelDirFileNames(), then call
it AGAIN if a zip was found. Then once the function returns,
getDirectoryData() will still unconditionally call
FILESYSTEM_getLevelDirFileNames(). This smells like someone bolting
something on without regard for the whole picture of the system, but
whatever; I can clean up their mess just fine.
So, what do I do about this? Well, just like I did with text splitting
and binary blob extras, make the final for-loop - the one that does the
actual metadata parsing - more immediate.
So how do I do that? Well, PhysFS has a function named
PHYSFS_enumerate(). PHYSFS_enumerateFiles(), in fact, uses this function
internally, and is basically just a wrapper with some allocation and
alphabetization.
PHYSFS_enumerate() takes in a pointer to a function, which it will call
for every single entry that it iterates over. It also lets you pass in
another arbitrary pointer that it leaves alone, which I use to pass
through a function pointer that is the actual callback.
So to clarify, there are two callbacks - one callback is passed through
into another callback that gets passed through to PHYSFS_enumerate().
The callback that gets passed to PHYSFS_enumerate() is always the same,
but the callback that gets passed through the callback can be different
(if you look at the calling code, you can see that one caller passes
through a normal level metadata callback; the other passes through a zip
file callback).
Furthermore, I've also cleaned it up so that if editorclass::loadZips()
finds a zip file, it won't iterate over all the files in the levels
directory a third time. Instead, the level directory only gets iterated
over twice - once to check for zips, and another to load every level
plus all zips; the second time is when all the heap allocations happen.
And with that, level list loading now uses less STL templated stuff and
much less heap allocations.
Also, ed.directoryList basically has no reason to exist other than being
a temporary std::vector, so I've removed it. This further decreases
memory usage, depending on how many levels you have in your levels
folder (I know that I usually have a lot and don't really ever clean it
up, lol).
Lastly, in the callback passed to PhysFS, `builtLocation` is actually no
longer hardcoded to just the `levels` directory, since instead we now
use the `origdir` variable that PhysFS passes us. So that's good, too.
If PHYSFS_mountHandle() failed to mount a zip file, we would print
PhysFS's error message straight, without any surrounding context. This
seems a little weird, and doesn't maximize understanding for readers;
I've made it so now the error message is "Could not mount <zip file>:
<PhysFS error>".
When Ethan added PhysFS to the game, he put in a hardcoded check (marked
with a FIXME) that explicitly removed all filenames that were "data"
returned by PHYSFS_enumerateFiles(). Apparently this was due to a weird
bug with the function putting in "data" strings in its output in PhysFS
2.0.3; however, the game now uses PhysFS 3.0.2, and I could not
reproduce this bug on my system. (I also tested, and this also
straight-up ignores legitimate level filenames that just happen to be
"data" (without the .vvvvvv extension).)
After talking with Ethan in Discord DMs, I asked if we could remove this
check, and he said that we could. So I'm doing it now.
Just like I refactored text splitting to no longer use std::vectors,
std::strings, or temporary heap allocations, decreasing memory usage and
improving performance; there's no reason to use a temporary
heap-allocated std::vector to grab all extra binary blob indices, when
instead the iteration can just be more immediate.
Instead, what I've done is replaced binaryBlob::getExtra() with
binaryBlob::nextExtra(), which takes in a pointer to an index variable,
and will increment the index variable until it reaches an extra track.
After the caller processes the extra track, it is the caller's
responsibility to increment the variable again before passing it back to
getExtra().
This avoids all heap allocations and brings down the memory usage of
processing extra tracks.
If you configure the build with -DBUNDLE_DEPENDENCIES=OFF, then VVVVVV
will dynamically link with TinyXML-2 and PhysicsFS instead of using the
bundled source code in third_party/ and statically linking with them.
Unfortunately, it doesn't seem like distros package LodePNG, and LodePNG
isn't intended to be packaged, so we can't dynamically link with it, nor
can we use some system LodePNG header files somewhere else because those
don't exist.
UTF8-CPP is a special case, because no matter what, it's going to be
statically linked with the binary (it doesn't come as a shared object
file in any way). So with -DBUNDLE_DEPENDENCIES=OFF, we will use the
system UTF8-CPP header files instead of the bundled ones, but it will
still be statically linked in with the binary.
The main motivation for doing this is so if VVVVVV ever gets packaged in
distros, distro maintainers would be more likely to accept it if there
was an option to compile the game without bundled dependencies. Also, it
discourages modifying the third-party dependencies we have, because it's
always possible for someone to compile those dependencies without our
changes, with this CMake option.
This patch restores some 2.2 behavior, fixing a regression caused by the
refactor of properly using std::vectors.
In 2.2, the game allocated 200 items in obj.entities, but used a system
where each entity had an `active` attribute to signify if the entity
actually existed or not. When dealing with entities, you would have to
check this `active` flag, or else you'd be dealing with an entity that
didn't actually exist. (By the way, what I'm saying applies to blocks
and obj.blocks as well, except for some small differing details like the
game allocating 500 block slots versus obj.entities's 200.)
As a consequence, the game had to use a separate tracking variable,
obj.nentity, because obj.entities.size() would just report 200, instead
of the actual amount of entities. Needless to say, having to check for
`active` and use `obj.nentity` is a bit error-prone, and it's messier
than simply using the std::vector the way it was intended. Also, this
resulted in a hard limit of 200 entities, which custom level makers ran
into surprisingly quite often.
2.3 comes along, and removes the whole system. Now, std::vectors are
properly being used, and obj.entities.size() reports the actual number
of entities in the vector; you no longer have to check for `active` when
dealing with entities of any sort.
But there was one previous behavior of 2.2 that this system kind of
forgets about - namely, the ability to have holes in between entities.
You see, when an entity got disabled in 2.2 (which just meant turning
its `active` off), the indices of all other entities stayed the same;
the indice of the entity that got disabled stays there as a hole in the
array. But when an entity gets removed in 2.3 (previous to this patch),
the indices of every entity afterwards in the array get shifted down by
one. std::vector isn't really meant to be able to contain holes.
Do the indices of entities and blocks matter? Yes; they determine the
order in which entities and blocks get evaluated (the highest indice
gets evaluated first), and I had to fix some block evaluation order
stuff in previous PRs.
And in the case of entities, they matter hugely when using the
recently-discovered Arbitrary Entity Manipulation glitch (where crewmate
script commands are used on arbitrary entities by setting the `i`
attribute of `scriptclass` and passing invalid crewmate identifiers to
the commands). If you use Arbitrary Entity Manipulation after destroying
some entities, there is a chance that your script won't work between 2.2
and 2.3.
The indices also still determine the rendering order of entities
(highest indice gets drawn first, which means lowest indice gets drawn
in front of other entities). As an example: let's say we have the player
at 0, a gravity line at 1, and a checkpoint at 2; then we destroy the
gravity line and create a crewmate (let's do Violet).
If we're able to have holes, then after removing the gravity line, none
of the other indices shift. Then Violet will be created at indice 1, and
will be drawn in front of the checkpoint.
But if we can't have holes, then removing the gravity line results in
the indice of the checkpoint shifting down to indice 1. Then Violet is
created at indice 2, and gets drawn behind the checkpoint! This is a
clear illustration of changing the behavior that existed in 2.2.
However, I also don't want to go back to the `active` system of having
to check an attribute before operating on an entity. So... what do we
do to restore the holes?
Well, we don't need to have an `active` attribute, or modify any
existing code that operates on entities. Instead, we can just set the
attributes of the entities so that they naturally get ignored by
everything that comes into contact with it. For entities, we set their
invis to true, and their size, type, and rule to -1 (the game never uses
a size, type, or rule of -1 anywhere); for blocks, we set their type to
-1, and their width and height to 0.
obj.entities.size() will no longer necessarily equal the amount of
entities in the room; rather, it will be the amount of entity SLOTS that
have been allocated. But nothing that uses obj.entities.size() needs to
actually know the amount of entities; it's mostly used for iterating
over every entity in the vector.
Excess entity slots get cleaned up upon every call of
mapclass::gotoroom(), which will now deallocate entity slots starting
from the end until it hits a player, at which point it will switch to
disabling entity slots instead of removing them entirely.
The entclass::clear() and blockclass::clear() functions have been
restored because we need to call their initialization functions when
reusing a block/entity slot; it's possible to create an entity with an
invalid type number (it creates a glitchy Viridian), and without calling
the initialization function again, it would simply not create anything.
After this patch is applied, entity and block indices will be restored
to how they behaved in 2.2.
Just like is_positive_num(), an empty string is not a number.
I've also decided to unroll iteration 0 of the loop here so readability
is improved; this happens to also knock out the whole "accepting empty
string" thing, too.
To account for empty strings, we simply have to special-case them.
Simple as that.
This was also a problem with the previous std::string implementation of
this function; regardless, this is fixed now.
The current way "arrays" from XML files are loaded (before this commit
is applied) goes something like this:
1. Read the buffer of the contents of the tag using TinyXML-2.
2. Allocate a buffer on the heap of the same size, and copy the
existing buffer to it. (This is what the statement `std::string
TextString = pText;` does.)
3. For each delimiter in the heap-allocated buffer...
a. Allocate another buffer on the heap, and copy the characters from
the previous delimiter to the delimiter you just hit.
b. Then allocate the buffer AGAIN, to copy it into an std::vector.
4. Then re-allocate every single buffer YET AGAIN, because you need to
make a copy of the std::vector in split() to return it to the caller.
As you can see, the existing way uses a lot of memory allocations and
data marshalling, just to split some text.
The problem here is mostly making a temporary std::vector of split text,
before doing any actual useful work (most likely, putting it into an
array or ANOTHER std::vector - if the latter, then that's yet another
memory allocation on top of the memory allocation you already did; this
memory allocation is unavoidable, unlike the ones mentioned earlier,
which should be removed).
So I noticed that since we're iterating over the entire string once
(just to shove its contents into a temporary std::vector), and then
basically iterating over it again - why can't the whole thing just be
more immediate, and just be iterated over once?
So that's what I've done here. I've axed the split() function (both of
them, actually), and made next_split() and next_split_s().
next_split() will take an existing string and a starting index, and it
will find the next occurrence of the given delimiter in the string. Once
it does so, it will return the length from the previous starting index,
and modify your starting index as well. The price for immediateness is
that you're supposed to handle keeping the index of the previous
starting index around in order to be able to use the function; updating
it after each iteration is also your responsibility.
(By the way, next_split() doesn't use SDL_strchr(), because we can't get
the length of the substring for the last substring. We could handle this
special case specifically, but it'd be uglier; it also introduces
iterating over the last substring twice, when we only need to do it
once.)
next_split_s() does the same thing as next_split(), except it will copy
the resulting substring into a buffer that you provide (along with its
size). Useful if you don't particularly care about the length of the
substring.
All callers have been updated accordingly. This new system does not make
ANY heap allocations at all; at worst, it allocates a temporary buffer
on the stack, but that's only if you use next_split_s(); plus, it'd be a
fixed-size buffer, and stack allocations are negligible anyway.
This improves performance when loading any sort of XML file, especially
loading custom levels - which, on my system at least, I can noticeably
tell (there's less of a freeze when I load in to a custom level with
lots of scripts). It also decreases memory usage, because the heap isn't
being used just to iterate over some delimiters when XML files are
loaded.
These comments were probably remnants of some late-night coding session
or something. Anyway, they're not needed; there's nothing to do with SDL
here, and the "Init" is obvious because the function is a constructor.
Contents and scripts should be reset in editorclass::reset(); there's no
reason to reset them again right before you load them from an XML file
in editorclass::load().
Additionally, the resets now consistently use SDL_zeroa() (for contents)
and scriptclass::clearcustom() (for scripts).
I'm partial to slash-asterisk-style comments, so I'll use those here.
Also, having a space after the start of comments is good. I've also
removed the "Add the script if we have a preceding header" comments
since it can be inferred by reading the surrounding code.
Instead of checking the length() of an std::string, just check if
pText[0] is equal to '\0'.
This will have to be done anyway, because I'm going to get rid of the
std::string allocation here, and I noticed this inefficiency in the
indentation, so I'm going to remove it.
The actual unindent will be done in the next commit.
This now means every XML array loading is done with common,
re-duplicated code. The only exceptions to this are special cases other
than the the majority of cases; the majority being a simple matter of
reading an array of integers and putting it into another array.
Seems like the only reason I hadn't caught the <customlevelscore> tag
until now was because I was focused on de-duplicating all the array
loads in Game::loadstats() and below, forgetting about
Game::loadcustomlevelstats().
In order to be able to use the LOAD_ARRAY() and LOAD_ARRAY_RENAME()
macros in Game::loadcustomlevelstats(), they have to be moved to earlier
in the file.
Even if split() didn't use the STL, using this function here is a bit
unnecessary, because a simple SDL_strchr() suffices. Refactoring split()
to not use the STL will break this caller anyway, so I might as well
just refactor this to not use split() in the first place.
This refactor also properly checks if the inputs are valid integers. And
since split() is no longer used, it also rejects inputs ending with a
trailing comma as being invalid, too; this didn't happen previously.
It's intentional that I used is_number() here instead of
is_positive_num(), thus accepting negative numbers; in the future it
might be possible to have negative room coordinates.
Valgrind reported this.
The error here is that the buffer here is only guaranteed to be
initialized up until (and including) the null-terminator, by
SDL_snprintf(). Iterating over the entire allocated buffer is bad and I
should feel bad as the girl who wrote this code; doing that reads
uninitialized memory and passes it to SDL_tolower().
As a bonus, the iterator increment is now a preincrement instead of a
postincrement.
This fixes memory leaking every single time a file gets loaded(!) when
the list of custom levels gets loaded(!!!), which Valgrind reports. This
memory leak is completely my bad; 2.2 properly frees the loaded file,
and VCE uses an std::unique_ptr - which I decided to ignore and not
think about why it would be there.
It's safe to do this free after uMem gets copied into std::string;
although, in the future, I *am* thinking about refactoring this function
(and the tag finder function) to not use std::strings, and I'll have to
be careful to make sure that the memory management with the file is
correct when I do so.
This makes the freesrc argument of Mix_LoadMUS_RW() 1 instead of 0. If
the argument is nonzero, then the passed SDL_RWops will be automatically
freed when m_music is freed, too.
I don't know why this was 0 before. Setting it to 1 fixes a memory leak
that Valgrind reports (which turns into an actual leak every time custom
assets are mounted or unmounted).
This adds a check that the pointer passed to
FILESYSTEM_loadFileToMemory() isn't NULL, and if it is, just returns
early in the function, instead of continuing later and producing a
different, slightly-misleading error message.
Previously, it was guarded behind a check for the length, which is... I
guess still perfectly fine behavior, but there's no reason to have a
length check here; FILESYSTEM_freeMemory() uses SDL_free(), which does a
check that the pointer passed is non-NULL (the pointer that is passed
here, despite not being initialized upon declaration, is guaranteed to
be initialized by FILESYSTEM_loadFileToMemory() anyway, so).
Following Ethan's example of bailing (calling VVV_exit()) if
binaryBlob::unPackBinary() couldn't allocate memory, I've searched
through and found every SDL_malloc(), then made sure that if it returned
NULL, the caller would bail (because you can't do much when you're out
of memory).
There should probably be an error message printed when the process is
out of memory, but unPackBinary() doesn't print an error message for
being out of memory, so this can probably be added later. (Also we don't
really have a logging system, I'd like to have something like that added
in first before adding more messages.)
Also, this doesn't account for any allocators used by STL stuff, but
we're working on removing the STL, and allocation failure just results
in an abort anyway, so there's not really a problem there.
Wow, there are a lot of these. All of these exit paths now use
VVV_exit() instead, which attempts to save unlock.vvv and settings.vvv,
and also frees all resources so Valgrind is happy. This is a good thing,
because previously unlock.vvv/settings.vvv wouldn't be written to if we
decided to bail for a given reason.
It should be between the include of the corresponding header file for
the source file (Script.h) and the includes of other local header files
(the files that are specific to this codebase only); this is the
convention that includes in all other source files follow.
However, it seems like I misplaced this, so I'm fixing it now.
This is just a function that calls the cleanup() in main.cpp, as well as
calls exit().
I would have liked to use SDL_ExitProcess() here, because that function
has ifdefs for different runtime environments. But alas, it's an
internal function and isn't exported. Ah well; exit() seems to be fine
anyway.
If there's a resource that doesn't otherwise need to be cleaned up and
is still alive upon program shutdown, then it should go in cleanup().
This cleans up Screen, GraphicsResources, Graphics buffers, Graphics
tiles, and musicclass audio upon program shutdown.
Even we technically don't NEED to clean these resources up ourselves
(the kernel is going to get rid of all of it anyway, else it'd be a
security problem), I'm doing this because otherwise Valgrind will
complain about these, and then it'd be difficult to see which memory
leaks are real and which are just "well this isn't really a leak but you
haven't freed this thing when the process exited, and that's technically
what a memory leak is".
These are all resources whose cleanup functions can be safely called
even if they haven't initialized anything yet.
This isn't a memory leak (not even Valgrind complains), because it gets
properly cleaned up in GraphicsResources::destroy(). Still, it's memory
that is just laying around not being used, and in the name of
deallocating things as soon as you no longer need them, we should
deallocate the base tilesheet images after we split all of them into
tiles.
This reduces the memory cost of all tilesheet images by half, since we
were essentially keeping around duplicates for nothing; this doesn't
really have much of an impact with conventional tilesheet sizes, since
they're usually small enough, but since 2.3 allowed for tilesheet images
of any size, this is a pretty big deal for really big tilesheet images.
It's okay to do this, even though they also get freed in
GraphicsResources::destroy(), because SDL_FreeSurface() does a NULL
check on the pointer passed to it, and we set the pointer to NULL after
freeing the surfaces.
A quick glance at PhysFS source code will show that PhysFS will bail if
PHYSFS_deinit() is called if it's not initialized.
"Bail" here just means setting an error code and returning early, so
it's not that bad. Still, it's the principle of the thing, and I just
want to ensure that FILESYSTEM_deinit() can be safely called no matter
if the filesystem hasn't initialized yet; having an error set by PhysFS
kind of taints the whole safety thing, even if it does nothing wrong,
no?
(although, speaking of which, we should be handling all errors by
PhysFS, but that's for later...)
These FIXME comments are still correct about code duplication, but
they're incorrect about where exactly the original code is after the
original code got moved around. So I've fixed them to refer to the
correct locations.
We really should get around to de-duplicating the code mentioned in
these comments...
Since musicWriteBlob is a temporary object that gets destroyed at the
end of musicclass::init(), in order to make sure we don't leak memory
and lose all the pointers to the blocks we just allocated in
musicWriteBlob, we need to call its clear() method after writing
BinaryMusic.vvv.
musicReadBlob was used for both MMMMMM and PPPPPP soundtracks. This
causes a memory leak if you have mmmmmm.vvv installed, because the
pointers holding each allocated block of MMMMMM would be lost when
PPPPPP got loaded. Valgrind complains about this memory leak.
This is in contrast to 2.2 and previous behavior, where musicReadBlob
was only a temporary object instead of being held in musicclass.
However, this wasn't really a memory leak (moreso something that just
didn't get cleaned up when closing the game), but it did get turned into
a leak when per-level assets mounting and unmounting got introduced in
2.3 (loading a level with custom assets after starting the game with an
mmmmmm.vvv, or exiting out of a level that had an mmmmmm.vvv, would
cause the game to leak memory). Leo recognized this, and moved
musicReadBlob onto musicclass in a separate 2.3 PR, but either he didn't
think about what was happening here too closely, or he didn't use
Valgrind, because he forgot about the memory leak caused by re-using the
same binaryBlob for PPPPPP and MMMMMM.
So instead, just use two different binaryBlob objects for MMMMMM and
PPPPPP. That way, no memory leaks happen.
I'm going to introduce another binaryBlob object in to the mix, and I
want to be able to re-use an existing FOREACH_TRACK #define without
having to copy-paste it again. So, TRACK_NAMES now takes in a blob
parameter, which will be passed to the temporary FOREACH_TRACK #define.
This removes the music cleanup code from musicclass::init(), and
requires that we also call destroy() in Graphics::reloadresources().
This is because we'll need to re-use the musicclass cleanup code
elsewhere, and we don't want to copy-paste the cleanup code. Or at
least, I don't (but I'm not a game dev, game devs copy-paste all the
friggin' time).
It doesn't feel quite write leaving all the buffer creation code in
main(), even though it's perfectly okay to do so and it doesn't result
in any memory mismanagement that Valgrind can report; so I'm factoring
all of it out to a separate function, Graphics::create_buffers().
As a bonus, we no longer have to keep qualifying with `graphics.` in the
buffer creation code, which is nice.
These destroy all the buffers that are created on the Graphics class.
Since these buffers can't be created at the same time as the rest of
Graphics is (due to the fact that they require knowing the pixel format
of the game screen), they can't be destroyed at the same as the rest of
Graphics is, either.
This is a very complicated way of zeroing out grphx (instead of using
SDL_zero()), which itself is completely unnecessary because grphx.init()
gets called immediately afterwards anyway.
It should be next-line brace, not same-line brace. Even in a codebase
that uses same-line braces everywhere, I still prefer having next-line
braces inside functions (because they're at the top level, and you can't
next them). But regardless, this should still be next-line brace like
(most of) the rest of the codebase.
The function previously conditionally freed a m_memblocks pointer if its
corresponding m_headers was valid. This makes me slightly worried about
the possibility that memory would be allocated, but the header would
still be marked as invalid.
I don't see how that could happen, but it's better to be safe than
sorry. SDL_free() does a guaranteed NULL pointer check (like most SDL
functions), so it's okay to pass NULL pointers to it.
Just to be sure, I'm also zeroing m_memblocks and m_headers after
freeing everything in the function.
MSVC complains about these, doesn't seem like GCC does. These can be
safely removed because they're unreachable, and they always follow a
case-switch or similar that has a default case which this code is a
duplicate of anyway. (Unless it isn't, in which case all the better to
remove it, becausee otherwise it looks misleading or confusing to casual
glances at the code.)
find_tag() would commit out-of-bounds indexing if someone made a level
file with malformed XML entity encodings in the metadata tags.
This would happen if the end of the string followed immediately after an
ampersand and hash, or if there wasn't a semicolon ending an XML entity.
Valgrind complains about these, so I've fixed it.
This fixes a bug where "12" gets properly evaluated as 12, but "148"
gets evaluated as 1408. It's because `place` gets multiplied by `radix`
again, so `retval` gets multipled by 100 instead of 10.
There's no reason to have a `place` variable, so I've removed it
entirely. This simplifies the function a little bit.
The previous person who wrote this (a girl named Misa) clearly didn't
understand the reason why you couldn't compare line[line.length()-1]
directly to a string literal. It's because the former is a char, and the
latter is a pointer to a char. Both are ints, so it compiles fine, but
it doesn't do what you want it to.
Why not just make the latter a char instead of a string literal? Well,
because you can, but also I clearly didn't think this through earlier,
so that's why I didn't do it in the first place.
But this is fixed now.
This avoids an unnecessary copy of the input std::vector, since we don't
need to modify it for anything. This cuts down on unnecessary memory
operations.
Apart from the std::string, this function no longer uses the STL.
ss_toi() is a simple function - it converts the input into an int,
taking as many digits as possible until it reaches a non-digit
character, at which point it stops. It's trivial to implement this
without the STL.
I could've used Int() here, but that would've required copying the
string to a temporary buffer to insert a null-terminator (we can't just
use a pointer-and-length data type either, the string functions don't
operate like that - one disadvantage of C strings!). Instead, I decided
to implement my own conversion to int here, because I don't think the
way we humans write our Arabic numerals is going to change anytime soon.
Also, the std::string input is now passed by const reference, instead of
making a copy - cutting down on unnecessary memory operations.
I personally like putting the asterisk with the type, because despite
the language parsing the asterisk as a part of the name, the pointer
part is clearly a part of the return type of the function. Also,
put constness here, to indicate that the input won't be modified inside
the function.
This comment indicates that the function is used by
UtilityClass::GCString(). Which is unnecessary, because the reader can
trivially search for usages of GCChar in the file itself (the 'static'
preceding the function should be a good enough hint) - and if there
aren't any, then the reader will know the function is unused, whereas if
they read the comment, they would have been under the assumption that it
wasn't used. (There might also a compiler warning about it being unused,
which would be more confusing if the comment was still there.)
Point is, comments can get outdated, so removing the comment here makes
the code more self-documenting.
This is a re-do of 942217f871 (#509), but
with a more conservative fix that only resets the player's newxp and
newyp when they respawn from a checkpoint or spawn in to the map.
Unlike the previous patch, if the player were to suddenly collide with a
conveyor or horizontally-moving platform during gameplay, their
y-position would revert back to the intended next y-position of the
previous frame. But this is the same behavior as before, I haven't ever
seen such a contrived situation come up, and this behavior is probably
more preferable for gameplay than actually going to the conveyor, so
it's fine.
I also decided to reset newxp here, and not just newyp, because while
resetting newyp seems to be enough, it's safer to also reset newxp (and
so future readers won't question why only newyp is reset but not newxp).
I tested this and it once again fixes the death loop issue from earlier,
while also still allowing for that Trench Warfare trick to be possible
(I tested it with the libTAS movie I mentioned in #606; it syncs fine).
There are no other known regressions resulting from this fix
(hopefully).
This reverts commit 942217f871.
This fix (of a regression of a fix) has a regression where immediately
flipping off of horizontally-moving platforms or conveyors will no
longer provide you with a "boost" given certain vertical pixel
alignments.
The regression that this fix fixed will be fixed another way.
Fixes#606.
This works on macOS, Wayland, and a few more esoteric platforms. X11
doesn't have a concept of DPI-awareness. Note that with this flag
SDL_GetWindowSize() isn't guaranteed to return the actual window size.
Retextured checkpoints have always been in the game, but clicking on
them in the editor would lead to them losing their retextured-ness. So,
checkpoints should be left alone if their p1 isn't either 0 or 1. Also,
they don't show up properly in the editor, so that's fixed, too.
Retextured and flipped terminals were added in 2.3, and show up properly
in-game, but don't properly show up in the editor, either. So now they
show up in the editor. Additionally, clicking on them will flip the
terminal as well, but only if its p1 is 0 or 1, just like checkpoints
now do.
This call to Makebfont() always existed, but ever since 2.3's per-level
custom assets were added, graphics.reloadresources() also calls
graphics.Makebfont(), meaning this call is unnecessary. Calling it twice
results in graphics.bfont and graphics.flipbfont having twice the number
of elements, until custom assets get mounted (or unmounted, technically).
This does the same thing as the last commit, but for No Death Mode
instead of Time Trials. Whenever you die in No Death Mode, or complete
it, all the relevant variables get copied to variables prefixed with
'ndmresult' that never get reset by script.hardreset(), and these
variables are what titlerender() use, instead of the "live" ones.
This makes it so when a Time Trial gets completed, all the relevant
variables get copied onto variables prefixed with 'timetrialresult',
which never get reset by script.hardreset(). Then titlerender() will use
those variables accordingly.
There are multiple different exit paths to the main menu. In 2.2, they
all had a bunch of copy-pasted code. In 2.3 currently, most of them use
game.quittomenu(), but there are some stragglers that still use
hand-copied code.
This is a bit of a problem, because all exit paths should consistently
have FILESYSTEM_unmountassets(), as part of the 2.3 feature of per-level
custom assets. Furthermore, most (but not all) of the paths call
script.hardreset() too, and some of the stragglers don't. So there could
be something persisting through to the title screen (like a really long
flash/shake timer) that could only persist if exiting to the title
screen through those paths.
But, actually, it seems like there's a good reason for some of those to
not call script.hardreset() - namely, dying or completing No Death Mode
and completing a Time Trial presents some information onscreen that
would get reset by script.hardreset(), so I'll fix that in a later
commit.
So what I've done for this commit is found every exit path that didn't
already use game.quittomenu(), and made them use game.quittomenu(). As
well, some of them had special handling that existed on top of them
already having a corresponding entry in game.quittomenu() (but the path
would take the special handling because it never did game.quittomenu()),
so I removed that special handling as well (e.g. exiting from a custom
level used returntomenu(Menu::levellist) when quittomenu() already had
that same returntomenu()).
The menu that exiting from the level editor returns to is now handled in
game.quittomenu() as well, where the map.custommode branch now also
checks for map.custommodeforreal. Unfortunately, it seems like entering
the level editor doesn't properly initialize map.custommode, so entering
the level editor now initializes map.custommode, too.
I've also taken the music.play(6) out of game.quittomenu(), because not
all exit paths immediately play Presenting VVVVVV, so all exit paths
that DO immediately play Presenting VVVVVV now have music.play(6)
special-cased for them, which is fine enough for me.
Here is the list of all exit paths to the menu:
- Exiting through the pause menu (without glitchrunner mode)
- Exiting through the pause menu (with glitchrunner mode)
- Completing a custom level
- Completing a Time Trial
- Dying in No Death Mode
- Completing No Death Mode
- Completing an Intermission replay
- Exiting from the level editor
- Completing the main game
Comments in general don't get verified by the compiler, but
commented-out code is even worse. Especially since this looks to be
outdated code.
As always, if we need some of this code, then we can just look back in
the Git history.
This fixes a segfault, because we would then pass compressed image data
to SDL_ConvertSurfaceFormat() in LoadImage(). I didn't test my previous
PR. Whoops.
Implicit conversion warnings happen all over the codebase, but there's
no reason to warn on all of them, and adding casts everywhere is
annoying to read and patently unnecessary.
MSVC is the only compiler that has this warning (GCC even on -Wall
-Wextra doesn't warn about implicit conversions), so disable it for
MSVC.
While compiling in release mode, GCC warns about these two potentially
being used uninitialized further down. The only way this could happen is
if the case-switches below didn't match up with a case, which would
require the game to be in an invalid state (and have invalid values for
rcol and spcol), but it's better to be safe than sorry.
The only thing we need LodePNG for is to decode a PNG that we've already
loaded into memory. We handle the filesystem part ourselves, so we don't
need LodePNG's filesystem functions; we don't encode images, and we
don't use the zlib functions. So disable all of those.
During 2.3 development, there's been a gradual shift to using SDL stdlib
functions instead of libc functions, but there are still some libc
functions (or the same libc function but from the STL) in the code.
Well, this patch replaces all the rest of them in one fell swoop.
SDL's stdlib can replace most of these, but its SDL_min() and SDL_max()
are inadequate - they aren't really functions, they're more like macros
with a nasty penchant for double-evaluation. So I just made my own
VVV_min() and VVV_max() functions and placed them in Maths.h instead,
then replaced all the previous usages of min(), max(), std::min(),
std::max(), SDL_min(), and SDL_max() with VVV_min() and VVV_max().
Additionally, there's no SDL_isxdigit(), so I just implemented my own
VVV_isxdigit().
SDL has SDL_malloc() and SDL_free(), but they have some refcounting
built in to them, so in order to use them with LodePNG, I have to
replace the malloc() and free() that LodePNG uses. Which isn't too hard,
I did it in a new file called ThirdPartyDeps.c, and LodePNG is now
compiled with the LODEPNG_NO_COMPILE_ALLOCATORS definition.
Lastly, I also refactored the awful strcpy() and strcat() usages in
PLATFORM_migrateSaveData() to use SDL_snprintf() instead. I know save
migration is getting axed in 2.4, but it still bothers me to have
something like that in the codebase otherwise.
Without further ado, here is the full list of functions that the
codebase now uses:
- SDL_strlcpy() instead of strcpy()
- SDL_strlcat() instead of strcat()
- SDL_snprintf() instead of sprintf(), strcpy(), or strcat() (see above)
- VVV_min() instead of min(), std::min(), or SDL_min()
- VVV_max() instead of max(), std::max(), or SDL_max()
- VVV_isxdigit() instead of isxdigit()
- SDL_strcmp() instead of strcmp()
- SDL_strcasecmp() instead of strcasecmp() or Win32 strcmpi()
- SDL_strstr() instead of strstr()
- SDL_strlen() instead of strlen()
- SDL_sscanf() instead of sscanf()
- SDL_getenv() instead of getenv()
- SDL_malloc() instead of malloc() (replacing in LodePNG as well)
- SDL_free() instead of free() (replacing in LodePNG as well)
This patch de-duplicates the tool drawing code a bit in the menu that
gets brought up when you press Space in the level editor, as well as
fixes several bugs related to the fact that the original author(s) of
the code decided to copy-paste everything. (It was most likely Terry,
judging by the distinct lack of whitespace between tokens in the code.)
There are two "pages" of tools that get shown when you open the tool
menu, according to your currently-selected tool.
1. On the first page, your currently-selected tool gets a brighter
outline. However, on the second page, the code to draw the outline over
your currently-selected tool is missing. So I've fixed that.
2. On the first page, the glyph indicator next to the tool icon also
gets brighter when you have that tool selected. However, on the
second page, the code that drew the brighter-colored indicator got
ran before the code that drew the normal-colored indicator, so this
was never shown. This is also fixed.
3. The glyph indicator of the gravity line tool didn't get brighter when
you had it selected, due to its special-cased copy-pasted code
drawing its brighter color before drawing its normal color. This has
also been fixed.
4. Lastly, the tool menu no longer draws the brighter-colored glyphs on
top of the normal-colored glyphs. Instead, the menu will simply draw
the brighter-colored glyphs and will not draw the normal-colored
glyphs in the first place. This is because double-drawing text like
this will look bad if the user has a custom font.png that has
translucent pixels, like I do.
All of these bugs have been fixed by paying off the technical debt of
copy-pasting code.
This variable seems to have been intended to make sure
game.savestatsandsettings() was called at the end of the frame, or make
sure that it didn't get called more than once per frame. I don't see any
frame ordering-related reason why it needs to be called specifically at
the end of the frame (the function doesn't modify any state), so it's
more plausible that it was added to make sure it didn't get called more
than one per frame.
However, upon further analysis, none of the code paths where
game.savemystats is used ever calls or sets game.savemystats more than
once, and a majority of the code directly calls
game.savestatsandsettings() anyway, so there's no reason for this
variable to exist. If we ever need to make sure it doesn't get called
more than once, and there's no way to change the code paths around to
prevent it otherwise, we can use the defer callbacks system that I added
to #535, when it gets merged.
These variables basically serve no purpose. map.customx and map.customy
are clearly never used. map.finalx and map.finaly, on the other hand,
are basically always game.roomx and game.roomy respectively if
map.finalmode is on, and if it's off, then they don't matter.
Also, there are some weird and redundant variable assignments going on
with these; most notably in map.gotoroom(), where rx/ry (local
variables) get assigned to finalx/finaly, then finalx/finaly get
assigned to game.roomx/game.roomy, then finalx/finaly get assigned to
rx/ry. If finalx/finaly made a difference, then there'd be no need to
assign finalx/finaly back to rx/ry. So it makes the code clearer to
remove these weird bits of code.
2.3's per-level assets feature also added a hotkey to reload the custom
assets of the level you're currently editing in the editor, so you
wouldn't have to re-load the level yourself. This hotkey is F9, but
however, it hasn't been documented in the hotkey list brought up by
pressing Shift, until now.
This patch cleans up unnecessary exports from header files (there were
only a few), as well as adds the static keyword to all symbols that
aren't exported and are specific to a file. This helps the linker out in
not doing any unnecessary work, speeding it up and avoiding silent
symbol conflicts (otherwise two symbols with the same name (and
type/signature in C++) would quietly resolve as okay by the linker).
Line clipping and second-frame edge-flipping have been broken since #539
was merged (d910c5118d). The cause of this
is moving the onground/onroof code around.
A proper loop order fix is going to come once #535 gets finalized and
merged, so this is a stopgap measure just to make sure people don't
report that line clipping or second-frame edge-flipping are broken in
current builds of 2.3.
There is a certain ordering of which corners you click on to place enemy
and platform boundaries, and script boxes. You must first click on the
top-left corner, then click on the bottom-right corner. The visual box
that is drawn after you've first clicked on the top-left corner clearly
shows this intended way of doing things.
However, it seems like despite the visuals, the game didn't properly
prevent you from clicking on the corners in the wrong way. If you placed
it from top-right to bottom-left, or bottom-left to top-right, then the
game would place the boxes accordingly, and they would have a weird
shape where two of its opposite sides would just be missing. But,
placing them from bottom-right to top-left is prevented accordingly.
The bug comes down to a simple use of "or", instead of the correct
"and". This isn't the first time the wrong conjunction was used in a
conditional... (8260bb2696, #136)
Since the code block that the if-statement guards is the code that will
execute if the corners placed were correct, the if-statement thus should
be written in the positive case and use a more restrictive "and",
instead of the negative case, which would use a more looser "or". There
are less cases that are correct than cases which are incorrect - in this
case, there is only 1 correct way of doing things (top-left to
bottom-right), compared to 3 incorrect ways of doing things (top-right
to bottom-left, bottom-left to top-right, bottom-right to top-left) - so
when thinking of positive cases, you should be using "and".
Or, you can always just test it. This bug has been in the game since
2.0, so it seems like no one just tested that incorrect input actually
didn't work.
Ever since 2.0, the colors of some of the Time Trial trophies in the
Secret Lab don't correspond to the crewmate of the given level. The
trophy for the Tower uses Victoria's color, and the Lab trophy uses
Vermilion's color. The Space Station 2 trophy uses Viridian's color, and
the Final Level trophy uses Vitellary's color.
This doesn't appear to be intentional, and it would be odd if it was,
since this game matches the colors everywhere else (each zone on the map
is colored with their respective crewmate in mind, for instance). Also,
the Lab trophy has the sad expression, which is Victoria's trait - it
would be weird if this was intended for Vermilion instead.
But the biggest piece of evidence that this was unintentional is the
corresponding comment for each color in Graphics::setcol(). It mislabels
yellow as cyan, cyan as yellow, blue as red, and red as blue.
To fix this, I simply have to set the correct color for each trophy in
case 25 of entityclass::createentity(). I could fix it in
Graphics::setcol() itself, but custom levels might depend on those
certain colors being the way they are, so it's a safer bet to just fix
it in the trophy creation case itself.
The diff of this might look weird. Even though all I'm doing is changing
some value assignments around, it looks like the "patience" algorithm
thinks I'm moving a whole case of the trophy switch-case around.
So... it looks like being able to switch through tilesets backwards has
been in 2.3 for a while, guess no one just uses 2.3 or the level editor
that much. It seems like it's always been broken, too.
If you were on the Space Station tileset (tileset 0), pressing Shift+F1
would keep you on the Space Station tileset instead of switching to the
Ship (tileset 4).
It looks like the problem here was mixing size_t and int together - so
the modulus operation promoted the left-hand side to size_t, which is
unsigned, so the -1 turned into SIZE_MAX, which is 18446744073709551615
on my system. You'll note that that ends in a 5, so the number is
divisible by 5, meaning taking it modulo 5 leads to 0. So the tileset
would be kept at 0.
At least unsigned integer underflow/overflow is properly defined, so
there's no UB here. Just careless type mixing going on.
The solution is to make the modulus an int instead of a size_t. This
introduces an implicit conversion, but I don't care because my compiler
doesn't warn about it, and implicit conversion warnings ought to be
disabled on MSVC anyway.
This fixes a bug where if you entered a tower before watching the
credits sequence, the credits sequence would have mismatched text and
background colors.
This bug happened because entering a tower modified the r/g/b attributes
of mapclass, and updated graphics.towerbg, without updating
graphics.titlebg too. Then gamecompleterender() uses the r/g/b
attributes of mapclass.
The solution is to put the r/g/b attributes on TowerBG instead. That
way, entering a tower will only modify the r/g/b attributes used to
render towers, and won't affect the r/g/b attributes used to render the
credits sequence.
Additionally, I also de-duplicated the case-switch that updated the
r/g/b attributes based off of the current colstate, because it got
copy-pasted twice, leading to three instances of one piece of code.
This fixes a bug where if you completed a custom level during
command-line playtesting, when returning to the title screen, the
background would be red and the text would be white.
This is because playtesting skips over the code path of pressing ACTION
to start the game and advance to the title screen, and the code path of
that ACTION press specifically initializes the title screen colors to
cyan.
This is also caused by the fact that completing a custom level doesn't
call map.nexttowercolour(), but my guess is that the intent there was
that the player would select a custom level, complete it, and return to
the title screen on the same screen with the same colors, so I decided
not to add a map.nexttowercolour() there.
Instead, I've moved the cyan color initialization to main(), so that it
is always executed no matter what, and doesn't require you to take a
specific code path to do it.
With commit 48313169b6 (PR #453),
AllyTally added a single-case patch for a regression, instead of fixing
it at its root cause.
In fact, that commit only fixes the music if Presenting VVVVVV is
playing while exiting to the menu, not if you enter a level that plays
Presenting VVVVVV - so it only fixes it going one way, and not going the
other way around; neither fixing also all the other cases this could
happen.
It doesn't, say, fix the case where you are exited to the menu
automatically after collecting the last crewmate in the level (or if the
level calls gamestate 1013 itself), which is what happens in my MIRA-VIU
TAS video at the end, and which I noted in the description of that video
( https://www.youtube.com/watch?v=OYQO4ePbYW4&t=111 ).
So, the problem here is that when musicclass::play() is called, it sees
that currentsong is the same as its input, and decides that since the
music is already playing, it shouldn't play the music again. Thus, the
music fades out, and we get silence instead of the music playing again.
But I said this was a regression. Why didn't this happen in 2.2? Well,
it's because of the fact that 2.2 sets currentsong to -1 (no music
playing at all) immediately when starting a fadeout, and not when the
fadeout completes (commit facb079b35,
PR #316). As you can imagine, this discrepancy could lead to bugs, given
that the game would think that music wasn't playing when in actuality it
was, but fixing this bug could also break code that expected this wrong
behavior. And in this case, it has.
So to properly fix the root cause of this, instead of naïvely
single-case patching out every case that comes up randomly, in
musicclass::play(), the function will now ignore if the input given is
the same as currentsong if the music is currently fading out.
This reverts commit 48313169b6, "Don't
fade music out when returning to the menu if it's Presenting VVVVVV".
This commit is being reverted because it is only a single-case patch -
that is, it fixes only a single symptom of the bug, and not its
underlying cause.
This is also another conditional where the rest of the function is
nested. Furthermore, in order to not repeat ourselves, I've also decided
to unconditionally assign currentsong to t, because if t is -1
currentsong gets assigned to -1 anyway - so it's the same thing, but
it's much easier to see and think about.
This removes an indentation level, and makes it easier to reason about
the function since you essentially now view it as the function returning
right there.
