I know earlier I removed the gameScreen extern in favor of using
screenbuffer, but that was only to be consistent. After further
consideration, I have found that it's actually really stupid.
There's no reason to be accessing it through screenbuffer, and it's
probably an artifact of 2.0-2.2 passing stack-allocated otherwise-global
classes everywhere through function arguments. Also, it leads to stupid
bugs where screenbuffer could potentially be NULL, which has already
resulted in various annoying crashes in the past. Although those could
be fixed by simply initializing screenbuffer at the very top of main(),
but, why not just scrap the whole thing anyway?
So that's what I'm doing.
As a nice side effect, I've removed the transitive include of Screen.h
from Graphics.h. This could've been done already since it only includes
it for the pointer anyway, but it's still good to do it now.
It's been long overdue that this variable be named properly. 2.2 added
integer scaling mode (thanks Ethan), 2.3 renamed it to scaling mode. Now
2.4 will properly call it what it is so people won't be confused by it.
The ScreenSettings struct member is renamed from stretch to scalingMode
along with the Screen class member being renamed, as well as the
toggleStretchMode function being renamed to toggleScalingMode as well.
Unfortunately, due to compatibility, we can't change the <stretch> XML
tag.
The reason why the wall stuck flipping behavior happened in the first
place was because the code went like this:
if (jumppressed)
{
if (onground && gravitycontrol == 0)
{
gravitycontrol = 1;
}
if (onroof && gravitycontrol == 1)
{
gravitycontrol = 0;
}
}
Basically, if you were both on ground and on a roof (i.e. stuck in a
wall), you would flip, but then due to code order and the fact that the
statement is not connected to the previous one, you would immediately
unflip afterwards. But if you were already flipped then the only path
that can be taken is to unflip you, since it's the statement that
appears last.
52fceb3f69 replaces the onground/onroof
conditionals with any_onground/any_onroof, so any player entity would
allow you to flip. But otherwise the code is the same. So is that the
problem?
No; tracing it through with GDB reveals that when you flip,
gravitycontrol is being set to 1, but never being set to 0. And it turns
out that's because any_onroof is not getting set. And that happens
because of another thing that 52fceb3f69
did - which was to set any_onground/any_onroof to true if indeed any
player entity was on ground or on a roof.
Unfortunately, the way Leo did it was to make the two statements
mutually exclusive - an 'if'-'else if' instead of two separate
statements. So a single entity could not mark both any_onground and
any_onroof as true (and the majority of the time, you will be a single
entity).
Thus, the solution is to just drop that 'else'.
Fixes#855.
The game will now assert if the main menu is created while
ingame_titlemode is true, or if we attempt to load into a mode while
it's true. And if assertions are disabled then it just stops doing it
anyway.
I don't think there's any way to get a glitched ingame_titlemode again,
ever since I removed save data deletion taking you back to the main
menu. But I've had enough bugs with the fact that we more-or-less use
the same state for main menu options and in-game options, and that
glitched ingame_titlemode bug DID just happen, so I'm taking
precautions.
The next commit will add logic that more-or-less quits the whole block
if ingame_titlemode, and instead of adding another layer of indentation
I will just pull this into its own function so we can use a return
statement.
Going back to the main menu allowed for glitchiness to occur if you
deleted your save data while in in-game options. This meant you could
then load back in to the game, and then quit to the menu, then open the
options and then jump back in-game, exploring the state of the game
after hardreset() had been called on it. Which is: pretty glitchy.
For example, this meant having your room coordinates be 0,0 (which is
different from 100,100, which is the actual 0,0, thanks for the
100-indexing Terry), which caused some of the room transitions to be
disabled because room transitions were disabled if the
game.door_up/down/left/right variables were -2 or less, and they were
computed based on room coordinates, which meant some of them went
negative if you were 0,0 and not 100,100. At least this was the case
until I removed those variables for, at best, doing nothing, and at
worst, being actively harmful.
Anyways, so deleting your save data now just takes you back to the
previous menu, much like deleting custom level data does. I don't know
why deleting save data put you back on the main menu in the first place.
It's not like the options menu needed to be reloaded or anything. I
checked and this was the behavior in 2.0 as well, so it was probably
added for a dumb reason.
I considered prohibiting data deletion if you were ingame_titlemode, but
as of the moment it seems to be okay (if albeit weird, e.g. returning to
menu while in Secret Lab doesn't place your cursor on the "play"
button), and I can always add such a prohibition later if it was really
causing problems. Can't think of anything bad off of the top of my head,
though.
Btw thanks to Elomavi for discovering that you could do this glitch.
SDL just got an API to toggle VSync without having to tear down the
renderer ( libsdl-org/SDL#4157 ). We can remove the workaround and use
that instead. For now, we are putting it behind an ifdef until SDL
2.0.18 officially releases in November.
Fixes#831.
This makes it so it's not even possible to stay on the TELEPORTERMODE
screen by opening the map while it's being brought down. It also makes
it so the map animation is able to be canceled when being brought up
just by opening the map and closing it.
Fixes#833.
This is a pretty hefty commit! But essentially, I made a new editorclass
object, and moved all functions and variables that only get used in the
in-game level editor to that class. This cleanly demarcates which things
are in the editor and which things are just general custom level stuff.
Then I fixed up all the callers. I also fixed up some NO_CUSTOM_LEVELS
and NO_EDITOR ifdefs, too, in several places.
This accompanies the editor.cpp -> CustomLevels.cpp change; I'll be
splitting out the editor functions in the next commit. The name of the
include guard has been changed as well, but not anything else.
The game will freeze the player immediately if they release a
directional button within 3 frames of pressing it. Similar to flipping,
this involves global state, and will only apply to the first player
entity.
Closes#484
Flipping only applies momentum to the player entity currently being
processed. This normally wouldn't be a problem. However, flipping
involves global state, and only one flip can occur per frame. This means
that additional player entities don't get this boost of momentum, which
feels somewhat unnatural during gameplay.
This commit fixes this by splitting flip logic out of the loop over
player entities, and applying the flip momentum to all player entities.
To match the option to nuke all main game save data, there is also now
an option to nuke all custom level save data separately (which is just
all custom level quicksaves, along with stars for level completion). It
has its own confirmation menu too. It does not delete any levels from
the levels folder.
Custom level quicksaves are NOT affected by the clear data menu, so the
player should be able to delete quicksaves this way. The quicksave
confirmation menu now has an extra option to delete the save (and that
option also has its own confirmation menu before deleting).
It's possible to get one page of levels by removing all the built-ins,
either by removing them directly from data.zip or by putting files with
the same filenames as them in your level folder that don't contain
nothing.
And hey, there's already a check for if no levels exist at all, so why
not check for this too?
If a zip file is improperly structured, a message will be displayed when
the player loads the level list.
This will only display the last-displayed improper zip, because there
only needs to be one displayed at a time. Also because doing anything
more would most likely require heap allocation, and I don't want to do
that.
Some people prefer the 2.2 behavior where unfocusing pauses the game,
but the music still plays. One such person is Trinket9 on the VVVVVV
Discord server, who wanted it that way.
The reason audio pausing was added in the first place was to prevent
desyncing music in levels with cutscenes that synced to music. Rather
than reverting it, let's add this option instead.
This is because the fade delay did not last long enough.
I was under the mistaken impression that the fade animation lasts for 15
frames. However, this does not account for the fact that the offset of
each fade bar is dependent on RNG, and the worst case scenario is that
they have an offset of 96 pixels (in the opposite direction of the
fade).
The actual fade animation timer accounts for the worst case scenario, so
the fade animation actually lasts for (320 pixels plus 96 pixels is 416
pixels, 416 pixels divided by 24 pixels per frame equals 17.333...
frames, but since the actual timer keeps adding/subtracting 24 pixels
per frame until it passes the 416-pixel threshold, that gets rounded up
to...) 18 frames.
And an extra frame to make it so deltaframe interpolation doesn't
suddenly stop on the last deltaframes before the screen is completely
black.
I also need to draw the screen black on the map screen when glitchrunner
mode is off, if there's a fadeout going on. Else that would introduce
yet another frame flicker.
Previously, turning glitchrunner mode on essentially locked you to
emulating 2.0, and turning it off just meant normal 2.3 behavior. But
what if you wanted 2.2 behavior instead? Well, that's what I had to ask
when a TAS of mine would desync in 2.3 because of the two-frame delay
fix (glitchrunner off), but would also desync because of 2.0 warp lines
(glitchrunner on).
What I've done is made it so there are three states to glitchrunner mode
now: 2.0 (previously just the "on" state), 2.2 (previously a state you
couldn't use), and "off". Furthermore, I made it an enum, so in case
future versions of the game patch out more glitches, we can add them to
the enum (and the only other thing we have to update is a lookup table
in GlitchrunnerMode.c). Also, 2.2 glitches exist in 2.0, so you'll want
to use GlitchrunnerMode_less_than_or_equal() to check glitchrunner
version.
This fixes a regression where you're unable to activate activity zones
in in-editor playtesting if your interact button is not separate from
the map button.
When I originally did #743, I didn't have an option to set the bind to
be non-separate, so I removed this logic without adding a
game.separate_interact check. But when I added the option, I overlooked
this code, and so this regression happened. Whoops.
This fixes a regression where you're able to start flipped by restarting
and then holding ACTION.
This happens because when the game resets all variables, it turns
hascontrol back on (because of hardreset()). However, this is handled in
the input function, and it's handled before player input is handled, so
the player is able to get 1 frame of being able to flip after a time
trial resets.
Why didn't this happen in 2.2? Because resetplayer() in 2.2 would set
lifeseq to 10, as if the player had died. However, this is inconsistent,
because loading in to the game for the first time would not result in a
lifeseq of 10. So, in 2.2, restarting the time trial would remove that 1
frame of being able to flip because of lifeseq, while 2.3 doesn't set
lifeseq because the player hasn't died.
I could have fixed this by setting lifeseq in the time trial restart
code, but I decided to just set hascontrol to false instead.
Fixes#770.
The game automatically writes settings to disk after any other setting
is changed, so it should do the same whenever the user changes
controller keybinds.
This is a lot of copy-pasted code, but a little bit of copy-pasting
never hurt anyone...
The keybind to interact with activity zones and teleporters is now
separate from the keybind to open the map, or return to the editor from
in-editor playtesting, or restart a time trial. The keybind is now E,
and the default controller bind is X. No controller button prompts, but
the game didn't have controller button prompts anyways, so whatever.
Doing this now because if people's muscle memory are going to be broken
by not being able to spam the map keybind anymore, at least we can help
a bit by changing the keybind so they can keep spamming it - their
muscle memory is going to be broken anyways.
This option has to be enabled by going to the speedrunner menu options
and selecting "interact button". It is disabled by default.
All prompt text needs to be string-interpolated every time they are
drawn, because it is possible for people to change which interact button
they use in the middle of gameplay, via the in-game options.
Closes#736.
This is a small quality-of-life fix in the same vein as allowing the
player to press Esc in the teleporter menu (which they weren't able to
do in 2.2, either).
When you enter the Super Gravitron, you have to wait until the Super
Gravitron actually starts before being able to press Enter to return to
the Secret Lab. This is annoying if you just want to get back to the
Secret Lab. So, I've made it so the press-Enter-to-return functionality
is enabled from the moment that the Super Gravitron starts.
It turns out, despite the game attempting to prevent you from using
invincibility or slowdown in the Super Gravitron by simply preventing
you from entering the Secret Lab from the menu, it's still possible to
enter the Super Gravitron with it anyways. Just have invincibility or
slowdown (or both!) enabled, enter the game normally, and talk to
Victoria when you have 20 trinkets, to start the epilogue cutscene.
Yeah, that's a pretty big gaping hole right there...
It's also possible to do a trick that speedrunners use called
telejumping to the Secret Lab to bypass the invincibility/slowdown
check, too.
So rather than single-case patch both of these, I'm going to fix it as
generally as possible, by moving the invincibility/slowdown check to the
gamestate that starts the Super Gravitron, gamestate 9. If you have
invincibility/slowdown enabled, you immediately get sent back to the
Secret Lab. However, this check is ignored in custom levels, because
custom levels may want to use the Super Gravitron and let players have
invincibility/slowdown while doing so (and there are in fact custom
levels out in the wild that use the Super Gravitron; it was like one of
the first things done when people discovered internal scripting).
No message pops up when the game sends you back to the Secret Lab, but
no message popped up when the Secret Lab menu option was disabled
previously in the first place, so I haven't made anything WORSE, per se.
A nice effect of this is that you can have invincibility/slowdown
enabled and still be able to go to the Secret Lab from the menu. This is
useful if you just want to check your trophies and leave, without having
to go out of your way to disable invincibility/slowdown just to go
inside.
This factors out the slowdown and invincibility conditionals to a
function. This means less copy-pasted code, and it also conveys intent
(that we don't want to allow competitive options if we have either of
these cheats enabled).
This function isn't implemented in the header because then we would have
to include Map.h for map.invincibility, and transitive includes are
evil. Although, map.invincibility ought to be on Game instead (it was
only mapclass due to 2.2-and-previous argument passing), but that's a
bunch of variable reshuffling that can be done later.
They are now factored out to an inline function named incompetitive().
This is so their usage can be changed without having to change each
individual one in every place. This also clarifies the intent of using
these conditionals (they are for when we're in a "competitive" mode).
This fixes a bug where using the fullscreen toggle keybind (Alt+Enter,
Alt+F, or F11) wouldn't update the color of the "resize to nearest" menu
option. The color doesn't functionally change anything - the option
still won't work, and will still have the message telling you that you
need to be in windowed mode when you move your menu selection to it -
but it's an easy inconsistency to fix; just move the menu recreation in
to Screen::toggleFullScreen() itself.
The game dereferences graphics.screenbuffer without checking it first...
it's unlikely to happen, but the least we can to do be safe is to add a
check and assert here.
Pressing Esc to cancel the confirm quit menu didn't play the squeak, in
contrast to pressing ACTION to cancel it, so now it does; pressing Esc
to close the pause menu or pressing ACTION will also now play the
Viridian squeak too.
