The conversion from `concatMapStrings` to `concatStringsSep` introduced in https://github.com/nix-community/home-manager/pull/2481
creates an unintended behavior change where the formatted config does not end in a newline.[1]
This is problematic for manipulation at the Nix level. In particular, this cause a regression in
the generation of gtk2 settings due to concatenated of the formatted config and `gtk2.extraConfig`
without a newline in between.
This commit restores `concatMapStrings` to match the previous behavior and adds a newline to
the final string for the generated gtk2 config. The test case for gtk2-basic-config
was also updated to check behavior at concatenation boundaries.
[1] - https://github.com/nix-community/home-manager/pull/2481#discussion_r830648706
If set to true, desktops configured in `monitors` will be reset every time
the config is run.
If set to false, desktops will only be configured the first time the config is run.
This is useful if you want to dynamically add desktops and you don't want them
to be destroyed if you re-run `bspwmrc`.
Nix permits user level configurations through ~/.config/nix/nix.conf that allow
customization of system-wide settings and behavior. This is beneficial in chroot
environments and for per-user configurations. System level Nix configurations in the
form of /etc/nix/nix.conf can be specified declaratively via the NixOS nix module but as
of currently no counter part exists in home-manager.
This PR is a port of the RFC42 implementation for the NixOS nix module[1]
to home-manager. Non-applicable options have been excluded and the config generation
backends have been tweaked to the backends offered by home-manager. A notable change
from the NixOS module is a mandatory option to specify the Nix binary corresponding
to the version "nix.conf" should be generated against. This is necessary because
the validation phase is dependent on the `nix show-config` subcommand on the host platform.
While it is possible to avoid validation entirely, the lack of type checking was deemed too significant.
In NixOs, the version information can be retrieved from the `package` option itself which
declares the Nix binary system-wide. However in home-manager, there is no pure way to
detect the system Nix version and what state version the "nix.conf" should be generated
against. Thus an option is used to overcome this limitation by forcing the user to
specify the Nix package. Note this interaction can still be automated by forwarding
the system-wide Nix package to the home-manager module if needed.
Three unit tests were added to test the module behavior for the empty settings, the example
settings and the example registry configurations respectively.
[1] - NixOS/nixpkgs#139075
* gtk: add cursor theme configuration
- Added the `cursorTheme` under the gtk module.
- Added tests for the gtk3 settings file generation, and renamed
the gtk2 unit test expected file for clarity.
- Added guard against generating a blank `gtk.css` when `cfg.extraCss`
is empty.
- Replaced `concatMapStrings` calls with `concatStringsSep`. The library function
`concatMapStrings` generates an intemediate list which is then passed to
`concatStringsSep`, As we are not performing other transformation except
the addition of newlines, a direct call to `concatStringsSep` is sufficient.
- Updated description of examples to be more general "~/.config" -> "$XDG_CONFIG_HOME".
- Update helper functions `toGtk3Ini` and `formatGtk2Option` to use the library
function `boolToString` and escape the separator in the key name.
* xcursor: delegate GTK cursor settings to gtk.cursorTheme
- Added deprecation warning for GTK settings in the `xsession.cursorTheme` module.
- Modified config section to use `gtk.cursorTheme` for GTK cursor settings.
This has no effect if the user does not have any aliases defined for
any accounts.
This will also only add `--my-address=` to only accounts that are
enabled to be tracked by mu.
Note, the pubs configuration file uses ConfigObj syntax, which is
similar to the INI files syntax but with extra functionalities like
nested sections. This prevents it from using Nix's INI format
generator. Here is an example of pubs configuration that cannot be
generated using Nix's INI format generator:
[plugins]
[[git]]
manual=False
For this reason, we opted for a stringly-typed configuration since the
use of a structured `settings` option would require a custom parser.
Previously, if a process inside a foot client triggered the OOM killer,
systemd would also kill the parent unit, namely the foot server.
This is not ideal if a user has a lot of clients attached, and it's
usually not the terminal emulator's fault that a process inside it has
ended up using all the available memory.
This patch moves both home.sessionVariables and
programs.zsh.sessionVariables from .zshrc to .zshenv. Additionally,
these two kinds of session variables will not be sourced more than
once to allow user-customized ones to take effect.
Before, session variables are in .zshrc, which causes non-interactive
shells to not be able to get those variables. For example, running a
command through SSH is in a non-interactive and non-login shell, which
suffers from this. With this patch, all kinds of shells can get
session variables.
The reason why these session variables are not moved to .zprofile is
that programs started by systemd user instances are not able to get
variables defined in that file. For example, GNOME
Terminal (gnome-terminal-server.service) is one of these programs and
doesn't get variables defined in .zprofile. As a result, the shells it
starts, which are interactive and non-login, do not get those
variables.
Fixes#2445
Related NixOS/nixpkgs#33219
Related NixOS/nixpkgs#45784
This file is not formatted before and is excluded by ./format, so I don't format it.
Currently translated at 78.5% (11 of 14 strings)
Translate using Weblate (Japanese)
Currently translated at 100.0% (32 of 32 strings)
Translate using Weblate (Japanese)
Currently translated at 35.7% (5 of 14 strings)
Translate using Weblate (Japanese)
Currently translated at 84.3% (27 of 32 strings)
Translate using Weblate (Japanese)
Currently translated at 25.0% (8 of 32 strings)
Co-authored-by: Narazaki Shuji <shujinarazaki@protonmail.com>
Translate-URL: https://hosted.weblate.org/projects/home-manager/cli/ja/
Translate-URL: https://hosted.weblate.org/projects/home-manager/modules/ja/
Translation: Home Manager/Home Manager CLI
Translation: Home Manager/Home Manager Modules
When an hook is defined, a side effect was the creation of the
${notmuchIni.database.path}/.notmuch/ directory by home-manager. If
the Xapian database does not exist yet but this .notmuch directory
exists, Notmuch is confused and throws an error when `notmuch new` is
run (while this should create the database the first time).
This commit changes the hooks paths to $XDG_CONFIG_HOME where Notmuch
expects them (see notmuch-config(1)) instead of inside the maildir
database directory.
It also moves the configuration where Notmuch expects it, but the
$NOTMUCH_CONFIG environment variable is kept for backward
compatibility.
Plugins now accept a "type" element describing the language (viml, lua
, teal, fennel, ...) in which
they are configured.
The configuration of the different plugins is aggregated per language
and made available as a key in the attribute set `programs.neovim.generatedConfigs`
For instance if you want to configure a lua package:
```
programs.neovim.plugins = [
{
plugin = packer-nvim;
type = "lua";
config = ''
require('packer').init({
luarocks = {
python_cmd = 'python' -- Set the python command to use for running hererocks
},
})
'';
}
]
```
and you can save the generated lua config to a file via
```
xdg.configFile = {
"nvim/init.generated.lua".text = config.programs.neovim.generatedConfigs.lua;
};
```
- Add support for command line arguments, this allows arguments to be
persistently set if needed (i.e workaround hardware bugs or enabling
certain flags).
- Document setting a custom package will nullify the `commandLineArgs`
option.
- Fix `mkRemovedOption` assertion from being apply even when the
`extensions` option is unused for google chrome modules.
Watson is a CLI for tracking your time.
Two unit tests were added to validate the module behavior for an empty
configuration and the example configuration.
- The check did not account the default value of `settings.modules` to be `{}`.
The default value was changed to null.
- The `settings.modules` option is now hidden from the docs.
Currently translated at 100.0% (14 of 14 strings)
Translate using Weblate (Spanish)
Currently translated at 100.0% (32 of 32 strings)
Translate using Weblate (Spanish)
Currently translated at 57.1% (8 of 14 strings)
Co-authored-by: Mauricio Scheffer <mauricioscheffer@gmail.com>
Translate-URL: https://hosted.weblate.org/projects/home-manager/cli/es/
Translate-URL: https://hosted.weblate.org/projects/home-manager/modules/es/
Translation: Home Manager/Home Manager CLI
Translation: Home Manager/Home Manager Modules
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Update translation files
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Co-authored-by: Hosted Weblate <hosted@weblate.org>
Translate-URL: https://hosted.weblate.org/projects/home-manager/cli/
Translate-URL: https://hosted.weblate.org/projects/home-manager/modules/
Translation: Home Manager/Home Manager CLI
Translation: Home Manager/Home Manager Modules
Based on nixpkgs commit c4b3aa62608d592d8a983be685f7e82000f4de30
stringBool is not needed because makeDesktopItem handles converting boolean parameters to string,
and noDisplay and prefersNonDefaultGPU parameters have been added.
Swayidle is an idle management daemon for Wayland. This modules adds support for
running swayidle as a SystemD user unit and makes it configurable through
home-manager.
Write YubiKey token IDs in the format yubico_pam expects. See
https://developers.yubico.com/yubico-pam/ for details. Also refer to
the NixOS option security.pam.services.<name>.yubicoAuth.
Closes#2502
Currently, dot directories and XDG base directories are used
inconsistently in the Home Manager option declarations. This creates
ambiguity for the user as to where the location of the file should be
albeit this is rarely encountered in practice as it is sufficient to
read upstream documentation. The rationale is to make declarations
consistent and make a clear distinction between hardcoded and modular
specifications.
References to ~/.config in relevant nixpkgs modules were untouched as
the location is hardcoded upstream[1]. Furthermore, modules of
programs which do not follow XDG specifications were also untouched.
Generalization of tilde(~) expansions to $HOME were also considered,
however there isn't sufficient rationale despite the use of $HOME
being more universal. The expansion is standardized in POSIX[2] and is
essentially portable across all shells, thus there is no pragmatic
value to introducing the change.
[1] https://github.com/nixos/nixpkgs/blob/master/pkgs/top-level/impure.nix
[2] https://pubs.opengroup.org/onlinepubs/009695399/utilities/xcu_chap02.html#tag_02_06_01
Previously, home-manager would not create a user.js for a certain
profile if profile.bookmarks was not empty but
profile.settings was empty and profile.extraConfig was an
empty string.
The `style` option now also accepts a path instead of a text
configuration.
Keeping up with new Waybar options is annoying, so make the module a
freeform module.
The `modules` option will be removed in release 22.05.
The logic to generate warnings for modules and everything was
removed. I don't want to maintain the code that generates these
warnings anymore.
Since Rofi 1.7.1 (specifically davatorium/rofi@0e70d8a), the deprecated
`theme` option in the `configuration` section no longer works. For 1.7.0
and up, `@theme "name"` is supposed to be used *after* the
`configuration` block.
Swaynag is a replacement of i3-nag for sway. Swaynag is embedded in
Sway's build process albeit it is not an integral part of Sway,
therefore it has been added under `wayland.windowManager.sway` instead
of `programs`. It can be moved at a later time if necessary.
Two unit tests were added validate the module behavior for an empty
configuration and the example configuration.
Nixpkgs switched to OfflineIMAP version 8 which means that Python 3 is
now used instead of Python 2. As a result, get_pass() now returns a
byte array instead of a string and the argument to get_pass() must be
a byte array too. See
https://github.com/OfflineIMAP/offlineimap3/issues/103.
Add an option to set custom `$ZPLUG_HOME`. Changing it with
`home.sessionVariables` doesnt work, since it has to be exported
before Zplug is initialised
If the keyboard configuration is an empty set, don't run the setxkbmap
service.
The default values for all keyboard options are null or empty so long
as the state version is set to 19.09 or higher (21.05 being the latest
version).
Before this change, a warning would be printed to the console if you
tried to manage a file in a path containing a space. For example,
`vscodium`'s `userSettings` file on Darwin is at
`~/Library/Application Support/VSCodium/User/settings.json`.
Rationale:
As of release 1.1.2[1], the configuration ini file supports
declaration of the `[main]` header as an alternative to global
properties by enumerating all sections and mapping each to the
respective parsing function. Global properties will still be parsed
correctly by fnott however generation adds unnecessary complexity to
the module. This commit removes the need for global properties
generation.
Changes:
- Fixed the FIXME at L118.
- Cleaned up unneeded let bindings.
- Changed the generation method to use the `pkgs.formats.ini` from
pkgs-lib instead of the raw `generators` library. This was done for
consistency and clarity as the `pkgs.formats.ini` is still required
for type declaration and uses `generators` internally.
- Removed `global-properties` testcase.
- Updated `example-settings` testcase.
[1] - https://codeberg.org/dnkl/fnott/releases/tag/1.1.2
This commit introduces the `nixpkgs-disabled` module, that is
basically a mock of `nixpkgs` module where any value different from
`null` will cause an assertion error.
This is to help debugging cases where `home-manager.useGlobalPkgs` is
set to `true` and `nixpkgs.*` options are being used.
Nowadays this returns the following error:
```
error: The option `home-manager.users.<user>.nixpkgs` does not exist.
```
This will change too:
```
error: `nixpkgs` options are disabled when `home-manager.useGlobalPkgs` is enabled.
```
That will direct the user to the correct solution (either removing
`nixpkgs` or disable `home-manager.useGlobalPkgs`).
nnn is a terminal file manager.
It is configured mostly using environment variables, so the way I
found it to avoid needing to write either shell specific code or
using `home.sessionVariables` (that would need to make the user
relogin at every configuration change) is to wrap the program using
`wrapProgram`.
This is to better integrate with more advanced shell history managers
like McFly and Atuin. By initializing fzf first, we allow the history
managers to steal the C-r key binding from fzf.
This commit adds a module for configuring atuin, a replacement shell
history program.
The module adds options for generating atuin's `config.toml` from Nix,
and options to enable atuin's integration for bash and zsh
(which will rebind history keys to open the atuin history).
* screen-locker: Make xautolock optional, reorganize options
xautolock isn't really needed to trigger xss-lock on the basis of time
since the built-in screensaver functionality of X serves as one of the
event sources for xss-lock. Keeping it around and defaulting to
"enabled" to avoid unexpected breakage.
Also shuffled around the options to submodules for xss-lock and
xautolock to get rid of prefixes in option names and to make
enableDetectSleep a bit clearer.
* screen-locker: update maintainership
* tests/screen-locker: Stub i3lock and xss-lock
* screen-locker: add package options for xss-lock and xautolock
kanshi configurations can have more than one exec statement in a
profile. This change allows services.kanshi.profiles.<name>.exec to be
a list of strings rather than a single string.
Specifically, instead of
services.dbus.packages = with pkgs; [ gnome.dconf ];
we now recommend
programs.dconf.enable = true;
which does the same and more.
Currently, when a custom path is set for any of the XDG base
directories (i.e XDG_DATA_HOME, XDG_CONFIG_HOME, ...), the path will
be coerced into a string when consumed by other options such as
xdg.configFile et al. This causes the the given path to be copied to
the nix store which in the case of xdg.configFile et al, translate to
the file being written there as it is a absolute path.
Interestingly, the default base directories all work as intended as
they are encoded as a string.
This commit converts the option to a string regardless of whether it
is a primitive path or a string encoded path. This allows downstream
consumers to use the base directories in arbitrary way without
accidentally copying the content of the directory to the store. It is
implemented in a similar manner as how home.homeDirectory undergoes
string conversion.
The existing file-attr-name test was modified to test also custom xdg
base directories, and the home.file generation test was removed as
there is a dedicated test for this case in the files module. The test
case was renamed to file-gen to better reflect the new scope.
Make `gpgconf` only perform an import from derivation when the GPG
`homedir` is set to a non-default value, which probably isn't the case
for most users.
Bottom is a cross-platform graphical process/system monitor with a
customizable interface and a multitude of features.
Two unit tests were added validate the module behavior for an empty
configuration and the example configuration.
- Change generation behavior to always generate a configuration file
and pass it explicitly to fnott, it enforces the module to be
hermetic instead of offloading the configuration selection to
heuristics.
- Various style changes.
- Fix issue where fnott would abort due to an invalid config file when
both the configFile and settings options are unset.
- Remove the empty-settings test as a configuration file is now
already generated.
Suggested-by: Robert Helgesson <robert@rycee.net>
Fnott is a keyboard driven and lightweight Wayland notification daemon
for wlroots-based compositors.
There are four unit test to validate behavior for an empty
configuration, the default configuration, global properties and
systemd service file generation.
* gpg-agent: local agent acting as ssh-agent should yield
This happens commonly if someone using home manager with gpg-agent
acting as ssh-agent on both machines.
@rycee brought up how gpg-itself has some support for agents on both
ends, but in that case one is forwarding the gpg-agent socket rather
than forwardning the gpg-agent-as-ssh-agent socket. There is no need to
forward both.
So I think this is a good default:
- Forward just gpg-agent socket and this doesn't matter.
- Forward just the ssh-agent socket and this does the right thing.
- Forward both sockets and now the ssh one takes priority instead, but
forwarding both was always a silly thing to do.
Fix#667
* Update modules/services/gpg-agent.nix
Co-authored-by: Nicolas Berbiche <nic.berbiche@gmail.com>
Co-authored-by: Nicolas Berbiche <nic.berbiche@gmail.com>
At the moment, only the inbox of each mail account is added to neomutt.
This inbox is always called "Inbox", so if you configure multiple
accounts, it is hard to know which one is which.
This change allows the user to specify a display name per account that
uses `named-mailboxes` under the hood.
Additionally this change now allows to add other folders than the inbox,
for example the Trash, Spam or Drafts folders to be added on a per-account
basis. Using extraOptions is not possible here, as those are lazily
loaded on mailbox open and thus would appear at the bottom and not sorted
by account.
This commit also changes the default sidebar format string to use %D
instead of %B because %B will ignore named mailboxes and show the folder
name instead.
Fluidsynth's systemd unit currently has a hard dependency on the
pulseaudio systemd service. Since fluidsynth can use other sound
services (e.g., pipewire-pulse), this should be configurable. This
commit adds the relevant option.
PR #2238
When the 'fields' setting is not set in htoprc, the htop program won't read any
of the settings. Provide a default value for fields in case it's not explicitly
set by the user.
* pulseeffects: change default example
pulseeffects-pw is now an alias to easyeffects, and the `pulseeffects` binary
that this module references is no longer in that package.
* easyeffects: add module
The easyeffects service is the PipeWire equivalent of the pulseeffects
service.
Expose the generated viml config, this has 2 advantages:
1/ user can choose to write the generated config to a file of its choice
2/ the user can prepend/append to the config before writing it
xdg.configFile."nvim/init.vim".text = ''
" prepend some config
${programs.neovim.generatedConfigViml}
" append some config
'';
NOTE: this was already possible with
xdg.configFile."nvim/init.vim" = mkMerge [
(mkBefore {
text = ''
" prepend some config
'';
})
(mkAfter {
text = ''
" append some config
'';
})
]
This adds two new options: 'programs.neovim.coc.{enable,settings}`.
These settings offer a simple interface over `xdg.configFile."nvim/coc-settings.json`,
using the standard Nix' syntax instead of a multiline string.
With
programs.taskwarrior.dataLocation = /absolute/path
(outside of $HOME) the current implementation wrongly creates
$HOME/absolute/path (due to how home.file is implemented).
Since taskwarrior creates the dataLocation automatically on first run,
there is actually no need for HM to create that directory.
Additional benefit, the .keep symlink that HM creates as a side-effect
no longer appears in the taskwarrior data directory.
Fixes#2207.
Before, loading a module would be guarded by an optional platform
condition. This made it possible to avoid loading and evaluating a
module if it did not support the host platform.
Unfortunately, this made it impossible to share a single configuration
between GNU/Linux and Darwin hosts, which some wish to do.
This removes the conditional load and instead inserts host platform
assertions in the modules that are platform specific.
Fixes#1906
* rofi: add support to plugins
* rofi: update package example
Co-authored-by: Sumner Evans <me@sumnerevans.com>
* rofi: Format package example
* rofi: Fix tests
Rofi will not try to install plugins using override when tests overlay
actual rofi package with empty scirpt
* rofi: Refactor
Co-authored-by: Sumner Evans <me@sumnerevans.com>
* xresources: Add path configuration option
This allows the user to move .Xresources somewhere else, which can help
with decluttering the home directory.
* xresources: Update xresources.path docs
* xresources: Fix formatting
The packaging in nixpkgs for obs plugins has changed and there's a
wrapOBS function.
The name of the plugins has also changed so the example needed updating
to reflect that.
Related: https://github.com/NixOS/nixpkgs/pull/125308
* bspwm: various improvements
- fixes shell escaping issues and general style issues
- allow reloading the config on-the-fly by exposing bspwmrc to the user
* bspwm: add configuration test
- Add support for showing bold as bright colors
- Add support to configure the background transparency
- Fix the scrollOnOutput, it was not being dumped to the config
- Add tests!
- Add myself as maintainer
NixOS/nixpkgs@03310df843 disabled flake
support by default, so we now need to build a custom package and use it
if the user wants to `use flake` successfully. This should fix#2087.
* irssi: add ssl_cert option for servers
I was following these instructions
https://www.oftc.net/NickServ/CertFP/
and found that the `/server add -ssl_cert` option was needed.
This patch therefore adds an optional
`programs.irssi.networks.<name>.server.ssl.certificateFile` path.
Perhaps this could also be done with a `settings` attribute, but that
would probably require most of this module to be reworked.
* irsii: Add example-settings test case
`rbw` is a stand-alone Bitwarden client, which makes use of a daemon to
cache your password and manage state.
Its configuration can be managed by `home-manager` or not, leaving the
user free to configure it through `rbw config`.
When running a socket-activated emacs service, we don't want emacs to
remove the socket file after exiting, because then subsequent
invocations of `emacsclient` won't be able to use the socket to start
emacs.service again.
Emacs 27 added Type=notify support and updated the service definition to
remove the use of `emacsclient' to kill the service. Emacs 28 changes
the `StartupWMClass' in emacsclient.desktop to `Emacsd'. Update our
emacs.service and emacsclient.desktop definitions to match upstream
changes.
When killing emacs.service, the socket is removed, and subsequently
starting the service manually results in a service without a socket.
Prevent this by adding `RefuseManualStart=true' to the service's Unit
definition.
Drop Emacs 26 support as it is no longer shipped in nixpkgs. Update the
tests to verify the following configuration scenarios:
- Emacs version: 27, 28
- Socket activation: disabled, enabled
* xdg-desktop-entries: add module
rebase
* xdg-desktop-entries: adapt to changes in makeDesktopItem
This package depends on the makeDesktopItem function in nixpkgs, which recently changed its syntax:
https://github.com/NixOS/nixpkgs/pull/91790
This commit makes the module compatible with the new syntax.
It also exposes the fileValidation option in makeDesktopItem.
Co-authored-by: cwyc <cwyc@users.noreply.github.com>
Co-authored-by: --get <--show>
Pass meters for formatting in a list of attrsets so that ordering can be
preserved. In addition provide some mode-specific functions to create these
attrsets, to make for a bit nicer config.
This fixes#2060.
Previously, the comparison would not handle directory comparison
correctly, always finding that the source and target differed. This
would trigger the `onChange` script on each activation.
Fixes#2004
* isync/mbsync: replace master/slave with far/near
isync/mbsync: update tests to match new changes
* isync/mbsync: use mkRenamedOptionModule to alert user to near/far change
* isync/mbsync: use warnings to alert about master/slave far/near change
Fix capitalization
isync/mbsync: fix nitpicks
* isync/mbsync: run format script
* isync/mbsync: include new test for expected master/slave warnings
* isync/mbsync: add news about changes
This target is for systemd units that require a system tray to be
running.
This also fixes taffybar.service: previously, systemd would consider it
to be active (running) before it was actually ready to accept tray
icons.
Previous patch on deprecation warnings broke use of old options due to function
call with too many arguments. This fixes the arguments so deprecation warnings
are properly traced while preserving old configuration options.
* htop: add some missing meters
* htop: replace individual options with 'settings'
Deprecate all options and introduce `settings` for setting htop configuration
values in Nix configuration.
Use `lib.htop` to provide `fields` and `modes` for easy access to htop's integer
configuration. And `leftMeters` and `rightMeters` functions for building the
separate `*_meters` and `*_meter_modes` attributes.
* htop: add release-notes 21.05 entry
* htop: improve deprecation warnings
Move default configuration into `settings` and make deprecated options default
to `null`. Print deprecation warnings for any option that is non-null --
i.e. only show warnings for explicitly specified deprecated options.
* htop: make self code owner of module
* release notes: fix invalid programs.htop xref
Foot is a fast terminal emulator for Wayland. It can optionally be run
in a client-server configuration.
There are three unit tests to handle an empty configuration, the
default configuration, and systemd service file generation.
There is a need to manage XDG Base Directory system directory
environment variables in Home Manager modules. There is an existing
mechanism in `targets.genericLinux.extraXdgDataDirs', but this does not
apply to NixOS systems.
Furthermore, it is important that `XDG_CONFIG_DIRS' and `XDG_DATA_DIRS'
are set in both login shells (to support getty and SSH sessions) as well
as the systemd user manager (to propagate them to user services and
desktop environments).
The first need is addressed by adding the `xdg.systemDirs' module, which
configures lists of directory names for both `config' and `data'
directories. These are then set in
`$XDG_CONFIG_DIR/environment.d/10-home-manager.conf' and picked up by
the systemd user manager.
To make these, and other variables set in
`systemd.user.sessionVariables', available in login shells, an
additional step is added to `etc/profile.d/hm-session-vars.sh' which
exports the result of
`user-environment-generators/30-systemd-environment-d-generator' which
is shipped with systemd. The effect of this generator is to print
variables set on the systemd user manager such that shells can import
these into their environment.
`nix-index` is a tool to quickly locate the package providing a certain
file in `nixpkgs`. It indexes built derivations found in binary caches.
This module adds the shell integration for its `command-not-found`
script for interactive shells.
This change makes the services created via the lieer module aware of the notmuch config created by the home-mangager notmuch module (which is stored in a non-standard location).
Without this change all the lieer services created by the lieer module failed for me, as they were unable to find the notmuch config.
