mirror of
https://github.com/NixOS/nixos-hardware
synced 2024-12-24 02:29:44 +01:00
146 lines
6.1 KiB
Markdown
146 lines
6.1 KiB
Markdown
# Purism Librem 5 revision 4
|
|
|
|
Purism's [Librem 5] is a privacy-oriented Linux-friendly smartphone.
|
|
|
|
[Librem 5]: https://puri.sm/products/librem-5/
|
|
|
|
## Installation procedure
|
|
|
|
> *Note*
|
|
>
|
|
> TODO: build a uuu-compatible installer.
|
|
|
|
Until there's a native installer, the easiest way to install NixOS on Librem 5 seems to be using [Jumpdrive].
|
|
|
|
[Jumpdrive]: https://github.com/dreemurrs-embedded/Jumpdrive
|
|
|
|
### Jumpdrive
|
|
|
|
Jumpdrive is a tiny Linux distribution which presents device's internal storage as USB mass storage when you connect it to a PC.
|
|
It also provides a shell session over telnet.
|
|
|
|
Follow the instructions in the repo to boot into Jumpdrive.
|
|
Note that `uuu` is part of `nxpmicro-mfgtools` package in nixpkgs.
|
|
|
|
Now, plug the device into your PC. A new block device representing Librem 5's internal MMC should appear in `/dev`.
|
|
Note down this device path.
|
|
|
|
### U-Boot
|
|
|
|
> **Note**
|
|
>
|
|
> While upstream u-boot does support Librem 5, it can only boot using `boot.scr`, for which NixOS has no native support.
|
|
>
|
|
> There's extlinux support in Librem 5's U-Boot here: https://source.puri.sm/Librem5/uboot-imx/
|
|
>
|
|
> This U-Boot version is packaged in the [`u-boot`] directory.
|
|
|
|
|
|
[`u-boot`]: ./u-boot
|
|
|
|
Provided you have a way to build Nix derivations for `aarch64-linux` (like a remote builder, [binfmt emulation], or you're building it on the phone itself), just run `nix-build u-boot/build.nix`.
|
|
|
|
[binfmt emulation]: https://search.nixos.org/options?channel=22.11&show=boot.binfmt.emulatedSystems&from=0&size=50&sort=relevance&type=packages&query=binfmt
|
|
|
|
> **Warning**
|
|
>
|
|
> Even though I've tested this myself, I can't guarantee that this will not render your device unbootable.
|
|
> Proceed with caution.
|
|
>
|
|
> If it does not work, your best bet is to follow the advice here, which will flash U-Boot build by upstream: https://forums.puri.sm/t/can-someone-with-serial-console-access-try-nixos-kernel-on-librem-5/19121/27
|
|
|
|
To flash u-boot to the device, use one of the following (assuming you've built u-boot to `./result`):
|
|
|
|
- if you're running an existing OS on the Librem 5, run `# result/bin/u-boot-install-librem5 /dev/mmcblk0` on the device itself
|
|
- if you've mounted the Librem 5's internal MMC via Jumpdrive, run `# TARGET="$(pwd)/result" result/bin/u-boot-install-librem5 <path to Librem 5's MMC>`
|
|
- if you want to flash u-boot manually (not recommended!), use `dd if=/dev/zero of=<path to MMC> bs=1024 count=1055 seek=2` and `dd if=result/uboot.imx conv=notrunc of=<path to MMC> bs=1024 seek=33`
|
|
|
|
At this point, if you have an OS installed on your Librem 5, it's best to reboot into it to check that the U-Boot was flashed correctly.
|
|
If that's the case, reboot back into Jumpdrive.
|
|
|
|
### Partitioning
|
|
|
|
Now, from your host system, partition the MMC.
|
|
|
|
> **Warning**
|
|
>
|
|
> Doing this wipes all data off the phone!
|
|
|
|
> **Warning**
|
|
>
|
|
> Make sure to keep 2MiB of free space before the first partition as this is where u-boot lives.
|
|
> If you accidentally create a file system in that space, you have to flash u-boot again.
|
|
|
|
It ended up looking like this (your device names will be different):
|
|
|
|
```console
|
|
$ sudo fdisk -l /dev/mmcblk0
|
|
Disk /dev/mmcblk0: 29,12 GiB, 31268536320 bytes, 61071360 sectors
|
|
Units: sectors of 1 * 512 = 512 bytes
|
|
Sector size (logical/physical): 512 bytes / 512 bytes
|
|
I/O size (minimum/optimal): 512 bytes / 512 bytes
|
|
Disklabel type: dos
|
|
Disk identifier: 0x15650736
|
|
|
|
Device Boot Start End Sectors Size Id Type
|
|
/dev/mmcblk0p1 * 4096 528383 524288 256M 83 Linux
|
|
/dev/mmcblk0p2 528384 61071359 60542976 28,9G 83 Linux
|
|
```
|
|
|
|
Now you can create filesystems on those partitions.
|
|
|
|
I went with a bootable `ext2` partition for `/boot`, and one `f2fs` partition for `/`. You can use any filesystem supported by NixOS (like `ext4` or `zfs`) for `/`, but `f2fs` might improve your eMMC lifespan as it supports wear leveling. Note that `f2fs` does not have a journal, so filesystem corruption can happen if the battery runs out for example.
|
|
|
|
Mount the partitions on your host system, e.g. to `/mnt` and `/mnt/boot`.
|
|
Remember that `/mnt` is the second partition, and `/mnt/boot` is the first.
|
|
|
|
### Installation
|
|
|
|
Now, write your NixOS config.
|
|
Use `/dev/mmcblk0p1` as `fileSystems."/boot"` and `/dev/mmcblk0p2` as `fileSystems."/"`.
|
|
Don't forget to import the [module from this directory](./default.nix).
|
|
If you plan to use the device as a smartphone, you have a choice of two "desktop" (?) environments packaged in nixpkgs: [phosh] and [Plasma Mobile].
|
|
|
|
[phosh]: https://search.nixos.org/options?channel=22.11&show=services.xserver.desktopManager.phosh.enable&from=0&size=50&sort=relevance&type=packages&query=phosh
|
|
[Plasma Mobile]: https://search.nixos.org/options?channel=22.11&show=services.xserver.desktopManager.plasma5.mobile.enable&from=0&size=50&sort=relevance&type=packages
|
|
|
|
Build the configuration (`nix build .#nixosConfigurations.<hostname>.config.system.build.toplevel` if you're using flakes).
|
|
|
|
Running `nixos-install --system ./result --root /mnt` will copy the system to the MMC.
|
|
Unless you're running on an aarch64 system, it will fail to activate or install the bootloader, however.
|
|
You must do this manually. Remember to `sync` and `umount` the MMC on your host before proceeding.
|
|
Get a shell on Jumpdrive, mount partitions there, and activate the system:
|
|
|
|
```console
|
|
$ nc 172.16.42.1 23
|
|
# mkdir /mnt
|
|
# mount /dev/mmcblk0p2 /mnt
|
|
# mkdir -p /mnt/boot
|
|
# mount /dev/mmcblk0p1 /mnt/boot
|
|
# chroot /mnt /nix/var/nix/profiles/system/activate
|
|
# chroot /mnt /nix/var/nix/profiles/system/bin/switch-to-configuration boot
|
|
```
|
|
|
|
Provided the last command succeeds, you now should have a bootable device.
|
|
|
|
Unmount:
|
|
|
|
```console
|
|
# sync
|
|
# umount /mnt/boot
|
|
# umount -l /mnt
|
|
# echo u > /proc/sysrq-trigger
|
|
# echo s > /proc/sysrq-trigger
|
|
```
|
|
|
|
And shut the phone down by holding the power key.
|
|
|
|
Start it up and you should be booting straight into your NixOS installation.
|
|
|
|
## Updating u-boot
|
|
|
|
Once you're running NixOS with this module, you can run `# u-boot-install-librem5 /dev/mmcblk0` any time to reflash the most recent version of u-boot from the running NixOS.
|
|
|
|
> **Warning**
|
|
>
|
|
> While I (@999eagle) will test u-boot updates on my own device before updating this repository, flashing u-boot may still render your device unbootable!
|