3.4 KiB
NOTE: This is an attempt to port samueldr's wip-pinebookpro to nixos-hardware. Credit for the work done goes to the original authors.
Using in your configuration
To use this configuration simply add this module to your configuration.
{
imports = [
${nixos-hardware}/pine64/pinebook-pro
];
}
That entry point will try to maximize the hardware compatibility.
Current state
Currently everything seems to work but this is not guaranteed it will be forever.
Kernel
By default this uses the latest upstream kernel but the overlay makes available pinebookpro-unstable-manjaro-kernel
which is built from a pinned kernel version and makes available the DP alt mode over Type-C.
This kernel is unstable and some sporadic kernel panics may occur, use at your own risk.
Known issues
HDMI over Type-C
HDMI over Type-C works only for the custom kernel and the audio dosen't work (it's an upstream problem).
rockchipdrm and efifb
This can be worked around by booting with the efifb=off kernel command-line.
This is already handled for you by this configuration. If using the generic UEFI AArch64 iso, you will need to add the option yourself to the command-line using GRUB.
EFI and poweroff
When booted using EFI, the system will not power off. It will stay seemingly stuck with the LED and display turned off.
A workaround exists, and is built in recent Tow-Boot (make sure your release is 2021.10-004 or more recent).
Tow-Boot
We highly suggest installing Tow-Boot to the SPI Flash.
Having the firmware installed to SPI makes the device act basically like a normal computer. No need for weird incantations to setup the platform boot firmware.
Alternatively, starting from the Tow-Boot disk image on eMMC is easier to deal with and understand than having to deal with U-Boot manually.
Mainline U-Boot
Mainline U-Boot has full support for graphics since 2021.04. The current unstable relases of Nixpkgs are at 2021.04 at least.
$ nix-build -A pkgs.ubootPinebookPro
Note that the default U-Boot build does not do anything with LED on startup.
Keyboard firmware
WARNING: Some hardware batches for the Pinebook Pro ship with the wrong chip for the keyboard controller. While it will work with the firmware it ships with, it may brick while flashing the updated firmware. See this comment on the firmware repository.
It is unclear how to identify said hardware from a running system.
To determine which keyboard controller you have, you will need to disassemble the Pinebook Pro as per the Pine64 wiki, and make sure that the IC next to the U23 marking on the main board is an SH68F83.
$ nix-build -A pkgs.pinebookpro-keyboard-updater
$ sudo ./result/bin/updater step-1 <iso|ansi>
$ sudo poweroff
# ...
$ sudo ./result/bin/updater step-2 <iso|ansi>
$ sudo poweroff
# ...
$ sudo ./result/bin/updater flash-kb-revised <iso|ansi>
Note: poweroff must be used, reboot does not turn the hardware "off" enough.