Implements a --flake options for build and switch, along with the usual
flake related optons (for lock-files etc).
Configurations in the flake are automatically discovered in the
following order:
1. `outputs.homeConfigurations."$flake-uri"` (the `--flake parameter`)
2. `outputs.homeConfigurations."$USERNAME@$HOSTNAME"`
3. `outputs.homeConfigurations."$USERNAME"`
Make home-manager use default configuration from
~/.config/nixpkgs/flake.nix, if it exists and nothing else is
specified.
Co-authored-by: Nicolas Berbiche <nicolas@normie.dev>
If the configuration is `null`, the compiled configuration
`xmonadBin` should not be used and instead the WM startup command
should be set to the bare `xmonad` binary.
* Git: Make signing key id be optional
Thus by default the signing key is selected by commit’s author.
* Git: Add tests for config with and without signing key id
* Git: Format tests for signing key
* Git: Remove default value (null) for signing key
* Git: Update description for signing key
* neomutt: support list in binds.map
Closes#1245
Adds support for specifying programs.neomutt.binds[].map as a list. If
specified as a list, then the binds will be concatenated with a ",".
* neomutt: add deprecation warning for (binds|macros).map as string
Added note that specifying 'programs.neomutt.(binds|macros).map' as a string is deprecated. Instead, use the list form.
* neomutt: note deprecation warning in release notes
Added note that specifying 'programs.neomutt.(binds|macros).map' as a
single string is deprecated in favor of specifying it as a list
* neomutt: add assertion that map is not empty
Added an assertion that each 'programs.neomutt.(binds|macros).map' list contains at least one element.
Resolves#1843. Allows aliases to be expanded in initExtra, and adds a
visible bashrcExtra option for commands that should be run in ~/.bashrc
even by non-interactive shells.
* neomutt: Fix eval error when primary account not enabled
If neomutt is enabled for an account, but not the primary account, the
configuration will fail with "list index 0 is out of bounds".
This adds the first neomutt-enabled account as a fallback.
* neomutt: add regression test/update tests
The `libFiles` option allows Home Manager to manage additional files
for xmonad.
Also compile xmonad during configuration build time. This avoids the
need to compile the configuration during activation.
Fixed the breakage for prezto introduced in #1778.
The previous method created issues where certain configuration files would get
replaced by prezto's variants instead of being merged as before. This led to
issues like no config being loaded if `home.zsh.dotDir` was set.
The old method of loading these files has been restored. This fixes the issue.
When installing plugins, Home Manager expects plugins (packages) to have
a `pname` attribute.
This is not always the case, so fallback to `name` if `pname` is unset.
This allows me to use offlineimap with passwordstore. I guess nobody
uses a newline in their password?
Co-authored-by: Kerstin Humm <kerstin@erictapen.name>
Set the systemd user service to use "mixed" killmode, which lets waybar
stop its module scripts. This fixes issues where waybar blocks shutdown
until systemd sends a SIGKILL to waybar child processes.
This allows you to set a theme for Qt applications. For example, if you
want to use `adwaita-qt` theme to have uniform look between Gtk and Qt
applications, you can use it like this:
```nix
{
qt = {
enable = true;
platformTheme = "gnome";
style = {
name = "adwaita";
package = pkgs.adwaita-qt;
};
};
}
```
This makes Home Manager respect the NO_COLOR environment variable to
disable coloring from output generated by Home Manager.
This initiative can be found more on https://no-color.org/
The mailboxes must be a tuple of string or the string "ALL".
The generated value was broken if the mailboxes configuration was a list
of only one string (but not "ALL"): the generated expression ( "str" )
was not a tuple but a string.
Now, we always generate a tuple (by adding a comma, even with a list of
size one). Getmail works with the special value "ALL" whether it is a
in tuple or not, so this case is not specifically handled.
If a user using msmtp to send all their email, it would be preferred if
git used it as well.
The only settings necessary are to set the smtp server to the msmtp
binary and set envelop sender to true, which makes git call msmtp with
the -f flag to set the from address from the email.
Alot uses the first email in the config as primary email. Because the
order in which the email.accounts were sorted was alphabetical, the account
set to `primary = true` was not put first in the alot config and thus
not considered as primary email for alot.
This was fixed by sorting the email accounts again such that accounts
with `primary = true` come first.
The environment variable FZF_CTRL_R_COMMAND has never existed
and been support by fzf according to
`git grep FZF_CTRL_R_COMMAND $(git rev-list --all)` and
`git log -G FZF_CTRL_R_COMMAND`.
Polybar's config format is a bit strange, and lists in particular are
annoying to handle. This enables using normal nix lists and nested
attrsets instead.
This change is not backwards-compatible, because the INI converter
converts lists of strings to space-separated values, and this does
something else. I expect that this is only relevant for the
`modules-left` etc bar setting, but that's enough to break things :(.
The `configure` option is not type checked and an artifact of how
nixpkgs is implemented.
We now have the equivalent options in home-manager and managing
interactions between the 2 systems complexifies maintainance of the
module.
Please use the other options at your disposal:
configure.packages.*.opt -> programs.neovim.plugins = [ { plugin = ...; optional = true; }]
configure.packages.*.start -> programs.neovim.plugins = [ { plugin = ...; }]
configure.customRC -> programs.neovim.extraConfig
The bash module always assigns a value to HISTFILE in the bashrc, even
when no value is explicitly set. This makes it impossible to tell bash
to use a different HISTFILE by setting the HISTFILE environment variable
HISTFILE=/tmp/bash_history bash
This changes the default value of programs.bash.historyFile to null, and
only writes the HISTFILE=... line to the bashrc if it is changed to
something else.
It was removed in nixpkgs and causes an error on rebuilds.
error: Your configuration mentions firefox.enableAdobeFlash. All plugin related options have been removed, since Firefox from version 52 onwards no longer supports npapi plugins (see https://support.mozilla.org/en-US/kb/npapi-plugins).
* zsh: update prezto path structure
The path structure was changed in Nixpkgs and this commit updates
the module to match.
Fixes#1773
* zsh-prezto: fix tests, small tidyup
Co-authored-by: Nick Hu <me@nickhu.co.uk>
Not every option is exposed by redshift/gammastep parameters, for
example gamma options are only exposed in configuration file. So this
PR refactors this module to generate a configuration file and pass it
to the redshift/gammastep using -c parameter.
This is a breaking change since there is no support for some of the
older options like `extraOptions`, but unless you use `extraOptions`
it should work without changes.
Not every option is exposed by redshift/gammastep parameters, for
example gamma options are only exposed in configuration file. So this
PR refactors this module to generate a configuration file and pass it
to the redshift/gammastep using -c parameter.
This is a breaking change since there is no support for some of the
older options like `extraOptions`, but unless you use `extraOptions`
it should work without changes.
The `SubFolders` option in mbsync controls the folder naming style in
the maildir. There are three different styles:
* Verbatim - <maildirPath>/top/sub/subsub
* Maildir++ - <inboxPath>/.top.sub.subsub (used by Dovecot)
* Legacy - <maildirPath>/top/.sub/.subsub
Previously, the `SubFolders` option was hardcoded to `Verbatim`. This
change allows configuration of the `SubFolders` option.
Add new options Darwin options:
- `targets.darwin.defaults`
This adds options for configuring macOS through the `defaults(1)` system.
This option can be used to manipulate a vast majority of user settings for macOS
and its applications.
This is implemented using freeform modules and includes additional descriptions
and type information for some useful options.
- `targets.darwin.keybindings`
This adds options for configuring the default keybindings for macOS text fields.
- `targets.darwin.search`
This adds options for configuring the default search engine for macOS.
If this commit now it is possible to define a custom theme directly
using Nix, like this:
```nix
{
programs.rofi.theme = {
"*" = {
background-color = "#000000";
border-color = "FFFFFF";
width = 512;
};
listview = {
cycle = true;
};
};
}
```
And this will be converted to the proper rasi format to be used in
rofi.
Nowadays services.{redshift,gammastep} modules are really similar. They
should, since Gammastep is a fork of Redshift with the main objective is
to support Wayland.
So instead of trying to maintain two separate modules, this commit unify
the options in lib/options.nix file, making the implementation of the
module itself ends up being really simple (just calling the common
options with the necessary parameters to differentiate between them).
* rofi: migrate to rasi configuration format
The Xresources configuration format is deprecated in Rofi. For example,
using Rofi from unstable (1.6.1 as of now) you get the following
warnings when starting the application:
```
(process:9272): Rofi-WARNING **: 01:38:48.596: The old Xresources based configuration format is deprecated.
(process:9272): Rofi-WARNING **: 01:38:48.596: Please upgrade: rofi -upgrade-config.
``````
So this commit migrates it for its new configuration format, called rasi
instead.
This new implementation uses attrsets manipulation instead of using
strings, making the code clearer and also fixing some bugs found during
the way. To make sure everything is right, I also created some tests.
If someone wants to validate if the generated config is correct, just
run in terminal:
```
$ rofi -dump-config
```
And rofi will dump the current configuration file, including all
unsetted options.
* docs: document programs.rofi.extraConfig changes
* rofi: add thiagokokada as maintainer
* rofi: add toRasi function
Closes issue #1725.
This allows mpv module to be customized with support for more advanced
features than the `programs.mpv.scripts` current support. For example,
with this change now this is possible:
```nix
{
programs.mpv.package = (pkgs.wrapMpv (pkgs.mpv-unwrapped.override {
vapoursynthSupport = true;
}) {
extraMakeWrapperArgs = [
"--prefix" "LD_LIBRARY_PATH" ":" "${pkgs.vapoursynth-mvtools}/lib/vapoursynth"
];
});
}
```
Since `programs.mpv.package` doesn't necessary reflect the final
derivation anymore (see #1524), we introduce `programs.mpv.finalPackage`
that has the resulting derivation.
This includes 2 tests:
- One to check if everything is alright with mpv
- Other to validate our assertion that package and scripts can't be
passed both at the same time
* docs: document recent mpv module changes
* mpv: add thiagokokada as maintainer
We currently check `isPath` and `isString` on crxPath and version
respectively, which is
1. pointless because the module system already does such checks, and
2. wrong because isPath means path literal; a derivation therefore is
not a path.
mu-cfind is meant to search for contacts within your contacts database and the emails that you have sent/received. The use of the --personal flag in that command is meant to filter for only emails that use your email addresses (which are all the ones you specify with the ${myAddresses} variable. Disregard what I said in #1623 (comment).
--my-address=<my-email-address>
specifies that some e-mail addresses are 'my-address' (--my-address can be used multiple times).
This is used by mu cfind -- any e-mail address found in the address fields of a message which also
has <my-email-address> in one of its address fields is considered a personal e-mail address. This
allows you, for example, to filter out (mu cfind --personal) addresses which were merely seen in
mailing list messages.
To initialize the database with mu init, the ${myAddresses} is not required to be passed to successfully initialize the database, but it is heavily recommended to do so.
To see the difference, in a safe location, run mu init --maildir=<path>, then mu index. You'll notice that "personal addresses" returns <none>, although the database will still work. However, mu cfind --personal will fail (as the personal contacts don't exist). Then run mu init --maildir=<path> --my-address=<address>, then mu index. Then you'll be able to search for contacts using mu cfind --personal.
When setting `...sway.package = null`, the default bar configuration
would throw an error trying to use the bar from the null package.
Logic is added to use the bar from `pkgs.sway` instead of `cfg.package`
if it is null.
Fixes#1714
* neovim: write config in $XDG_CONFIG_HOME/init.vim
instead of wrapping the configuration, which has sideeffects
https://github.com/NixOS/nixpkgs/issues/55376
* fix: update test accordingly
I also made some modifications to the systemd service to match the [AUR version](https://aur.archlinux.org/cgit/aur.git/tree/goimapnotify@.service?h=goimapnotify) of `goimapnotify`. In particular, restarting is useful in case a network failure causes `imapnotify` to exit - that shouldn't mean that it stops trying when the network comes back up.
Previously, it was not possible to set an arbitrary tmux prefix since
CTRL was hardcoded in the module.
To avoid breaking existing configs, a new option was implemented that
conveniently uses the tmux terminology but defaults to null and does
not affect previous behavior when set to null.
The behavior for the shortcut option was not completely replicated,
i.e., it does not bind "b" to send-prefix but stick to the default of
the prefix binding sending prefix (C-b C-b instead of C-b b) and it
does not bind repetition of the prefix (C-b C-b) to `last-window`,
both of these bring the option closer to the default tmux
configuration.
Fixes#1237
Brave Browser is a chromium-based browser, too.
+ it use the same web store with Chromium and Google Chrome.
+ the machanism of installing extensions works, and it's verified on
my macOS box.
The current definition makes waybar wait for dbus.service, but that
never happens because dbus.service is started on demand by
dbus.socket.
Per systemd docs:
https://www.freedesktop.org/software/systemd/man/systemd.service.html#Implicit%20Dependencies
- Services with Type=dbus set automatically acquire dependencies of
type Requires= and After= on dbus.socket.
- Socket activated services are automatically ordered after their
activating .socket units via an automatic After= dependency.
Services also pull in all .socket units listed in Sockets= via
automatic Wants= and After= dependencies.
Removing Requisite/After makes the service properly start for me,
simply specifying Type=dbus is enough.
See #1370
- Change the `attrsOf unspecified` to `pkgs.formats.json`
- Add missing default modules
- Expand the `with lib` with every function used
- Add inline documentation about the generated warnings
Using the final package in the `onChange` block broke some use cases.
This restores the old behavior and instead solves the test
dependencies in a different way.
Fixes#1611
This reverts commit 7c3c64208e.
The `invocation` is an optional attribute, so it doesn't make sense to
use it as the key in an attribute set. See
https://dystroy.org/broot/documentation/configuration/#verb-definition-attributes
Actually, `invocation` should not be defined when one wants to rebind
a built-in verb to a different key.
Also added documentation for the `key` attribute.
There exist mpv configurations which cannot be expressed in
`programs.mpv.config` currently. For example, it is impossible to use
multiple 'profile' attributes. This commit changes the way config and
profiles are parsed, using `lib.generators.toKeyValue` and
`lib.generators.toINI`, to allow for these kinds of configurations
through the use of `listsAsDuplicateKeys`.
This causes list values to be emitted as a list of key-value pairs
instead of a single key-value pair where the value is space separated.
This is useful, e.g., for socket units that would like to specify more
than one `ListenStream=` address.
The `accounts.email.accounts.<name>.neomutt.extraConfig` option is
included twice in the resulting config file for the account. One time as
part of the `mraSection`, one time as part of `accountStr` (`accountStr`
includes the `mraSection`). This removes that duplication. I opted to
keep the one in `accounStr`, since `extraConfig` doesn't necessarily
have anything to do with the `mraSection`.
In feh you can bind multiple keys to the same action, but Home Manager
only let you set a single key to an action. You can cheat and pass a
string with space-separated keys, but with this change you can pass a
list for each action to bind multiple keys to it.
Also adds a couple of tests.
Fixes#1366
* neovim: allow setting init.vim config alongside plugins
* neovim: add test for neovim plugins
* neovim: make pluginWithConfigType a have type submodule
`pgrep -x somecommand` exits with a non-zero status if it finds no
process running with the given name. When using home-manager as a
NixOS module, on boot (when sway isn't running) this script would
fail and then fail the unit since it seems the onChange scripts
are running with the -e switch.
This change ensures we're always returning a 0 exit status where we
attempt to get the pid of sway - we're only interested in either the
pid or an empty string, the exit status isn't important.
Adds a pet module without sync support as it makes no sense when
configuration is managed with Home Manager and the config would be
unwritable for pet anyway.
PR #1045
* mbsync: option for configuring a channel
A channel is a relationship between 2 directories/boxes/mailboxes
between the local machine (slave) and the remote mail server (master).
Each channel must be given at least:
* an account-unique name
* a pattern for which mailboxes to sync from master
* a pattern for what directory where that mail ends up on the
slave
Additional options can be added later.
* mbsync: option for configuring a group
A group is a grouping of channels together, so that many channels with
very different names can be handled as a single entity.
Groups are unique in mbsync because they will shadow channels that
have the same name on the command-line.
* mbsync: create groups configuration attribute
This is the end of the configuration that the end-user will use.
They will specify an attribute set that contains the name for the
group, so they can say
`accounts.email.accounts.<aname>.groups.<gname>` to access the
configuration for the group with the name `<gname>`.
* mbsync: write function to generate group-channel blocks
This function takes in a set of groups, and their consituent
channels and writes the appropriate .mbsyncrc block. The block is as
shown below:
Group groupName1
Channel channelName1
Channel channelName2
Group groupName2
Channel channelName3
Each group must have a unique name, no matter which account it is
declared under. The same holds true for channels. However, if there is
a group that shares the same name as the channel, the channel will
effectively be "shadowed" by the group, and mbsync will default to
working with the group in that case.
* mbsync: write function to generate channel configuration blocks
This function takes in a set of groups, which includes their
consituent channels and writes the appropriate .mbsyncrc block for the
channel. The block that is generated is shown below:
Channel groupName1-channelName1
Master :<accountName>-remote:<master-pattern>
Slave :<accountName>-local:<slave-pattern>
Channel groupName2-channelName2
Master :<accountName>-remote:<master-pattern>
Slave :<accountName>-local:<slave-pattern>
Each group must have a unique name, no matter which account it is
declared under. The same holds true for channels.
Using channels with the patterns set up this way allows one to specify
which maildir directories are to be synchronized FROM the master TO
the slave. In addition, it allows for these maildirs to be remapped,
between the master server and the local slave.
This is critical, because Gmail has a strange way of storing its mail
that makes using mbsync, mu, and mu4e more difficult.
There are additional channel parameters that are already present in
this codebase from the previous use of group-channel configuration,
which will be reused.
* mbsync: set the submodule's names field according to parameter
This is the same method as is used in creating an email account, named
`<name>` under `accounts.email.accounts.<name>`. This allows the user
to specify groups and channels, in a list-like format, but still gets
the "namespacing" to more easily handle the options available in each
of these locations.
* mbsync: provide examples of master/slave patterns for channels
* mbsync: create nested-let function to generate channel pattern
This pattern is required to either NOT be present, which means the
master pattern is used to match, or it has a list of patterns to use
beneath the master maildir to match against.
This function checks to ensure that if patterns is not empty, ONLY
then is the `Pattern` keyword printed. Otherwise, there are many, many
problems.
If there IS a list of patterns, then we use proper escaping methods to
ensure that the exact string is constructed.
* mbsync: per-account groups can have additional patterns
Gave the
`accounts.email.accounts.<name>.mbsync.groups.<gname>.channel.<cname>`
set a `patterns` option, which will allow for greater customization
and filtering of the master maildir to sync to the slave maildir.
* mbsync: add extraConfig option for easier-to-format options
These are options that can be handled by the `genSection` function in
the `genAccountFunction`, so they are left to the user to decide.
Most of these are made on a global basis anyways.
* mbsync: remove unneeded extraConfig.channel
This was originally placed here, seemingly, just to get this module
working. However, this field is actually more confusing now that a
separate per-channel configuration option for extra configurations has
been made available.
* mbsync: correct and improve comment in masterPattern description
* mbsync: switch channel/group generation to new functions
Changing this out is what moves us from the old system to the new one.
Instead of having a single channel manage a whole mailbox, we can now
specify an attribute set of groups that should correspond to an email
account.
Each of these groups contains an attribute set of channels that make
it up, and are grouped together for synchronization. In addition, each
of these channels can have additional IMAP4 parameters attached to
them to further refine synchronization.
Lastly, each of the channels is grouped together under the Group
section, ensuring that the channels' mailboxes synchronize as they
have been specified.
* mbsync: only generate group/channel configuration if channels present
Typically, when a group is specified, channels will be specified as
well. However, if due to error or mistake, the user forgets to specify
ANY channels for a group, we should not generate that group's
information.
This means that no channels are specified (which maps the remote
master to local slave). In addition, the `Group <gName>` block (which
brings the separate channels together) is also not generated.
Another thing to consider is that a user might specify a group and a
channel, but perform no additional configuration of the channel.
In a configuration, this would be realized by
`accounts.email.accounts.<aName>.mbsync.groups.<gName>.channels.<cName>;`
This creates the channel with the name `<cName>` and the
`masterPattern`, `slavePattern`, and `patterns` fields use their defaults.
By definitions set within mbsync, these defaults actually specify that
the remote master's `INBOX` mail directory is synchronized to the
local slave's `INBOX` directory.
So, if there is a channel that has no fields specified, then we DO
want to generate its configuration. But if there is a group that has
no channels, then we do NOT generate it.
* mbsync: acc comment explaining why groups attr set is never empty
* Revert "mbsync: remove unneeded extraConfig.channel"
This reverts commit 941c4771ca.
To support backwards compatibility, I need to leave this field/option
in the module, even if it will likely be more confusing to do it this way.
* mbsync: channel compatibility with previous iteration of mbsync
The previous version of mbsync used a single channel for an entire
account. This leads to issues when trying to change the mailbox
hierarchy on the local machine. The problem with this is that some
email providers (Gmail, among others) use a slightly different maildir
hierarchy, where the standard mailboxes (Inbox, Drafts, Trash, etc.)
are stored inside another directory (`[Gmail]/` in the case of Gmail).
This new version allows the user to specify any number of groups with
any number of channels within to reorder their mail however they wish.
However, to maintain backwards compatibility, I moved the original
channel-generating code to a function that will run ONLY when
there are no groups specified for THIS account.
* Revert "mbsync: channel compatibility with previous iteration of mbsync"
This reverts commit b1a241ff9f.
This function is in the wrong location and this was wrongly committed.
* mbsync: function for backwards compatibility with previous mbsync
NOTE THAT THIS IS THE CORRECT COMMIT FOR THIS CHUNK OF CODE!!
The previous version of mbsync used a single channel for an entire
account. This leads to issues when trying to change the mailbox
hierarchy on the local machine. The problem with this is that some
email providers (Gmail, among others) use a slightly different maildir
hierarchy, where the standard mailboxes (Inbox, Drafts, Trash, etc.)
are stored inside another directory (`[Gmail]/` in the case of Gmail).
This new version allows the user to specify any number of groups with
any number of channels within to reorder their mail however they wish.
However, to maintain backwards compatibility, I moved the original
channel-generating code to a function that will run ONLY when
there are no groups specified for THIS account.
* mbsync: function to choose which style of group/channels to generate
This is a simple if-check. If the old style is used, then this
account's mbsync.groups attribute set is empty. If that is the case,
then the old-style single-channel per account is used.
If that is NOT the case, then the new style is used in preference of
the old. This means that ALL channel code that would be generated by
the old version is replaced by the new one.
* mbsync: switch per-account config generation to check channels
* mbsync: program-wide groups if no account-specific groups
At the end, we have to choose whether or not to generate the old style
of having program-wide groups to specify things, where the boxes on
the channel underneath the group specifies which mailboxes to sync.
Here, we only generate the old style of group IF there is ANY account
that does NOT have the new `accounts.mbsync.groups` defined. At that
point, it is up to the user to ensure that the accounts in
`programs.mbsync.groups.{}` align with the name chosen for the
account, as I have made no attempt to change this old code.
However, if ALL accounts have their `mbsync.groups` defined, even if
each of the groups has a single empty channel, it will generate the
groups in the new style.
* mbsync: ensure \n after hm-generated comment
This was a multi-part fix. First, the `# Generated by Home Manager.`
comment has been reworked to ensure that it will ALWAYS have a
newline, even if the program-wide extraConfiguration is empty.
Next, we switched to placing 2 newlines between every account, to
provide further visual distinction between each account, which can
have multiple channels and multiple groups defined at the same time.
Lastly, the groupsConfig was slightly reworked, so that both the old
and new version can be used, but the new one will take precedence.
Because of this, groupsConfig is now a list of strings, which will
have single newlines inserted between each element.
But if the old style is NOT used, then the groupsConfig list
contains one element, an empty string. A single element has nothing
added as a separator, and an empty string produces no output.
* mbsync: only generate new group/channels if channels present
Here, the problem was if the user created a group for an account, but
did not also include a set of channels. If no channels have been
specified, then the group should NOT have its group-channel mapping generated.
I also corrected and improved the comment regarding
`genGroupChannelString`'s function and intended behavior.
* mbsync: channel patterns generate their own newlines
This means that when a channel has extra `patterns` defined for it, it
will generate those, and a single newline will be appended to the end
of that newly constructed string.
The moving of the newline character is slightly important because
otherwise, every account would receive an extra newline after every
channel, leading to 2 newlines after every channel.
* mbsync: place newline between each channel in a group
* mbsync: ensure old group/channel has proper spacing
This ensures that if the old style of generating program-wide groups
that there is the proper spacing before the group and in between each
line within the group.
* mbsync: ensure no empty channels present
If the user specifies a group correctly, they must still specify an
attribute set of channels. However, if they do not, then we need to
ensure that a group with no channels does NOT have any channel
configurations generated for it.
If there is a channel string generated for a channel that is empty,
then the `mapAttrsToList` returns a singleton list that contains just
the empty string. Thus, we can filter out all those results, to ensure
that no empty channels are generated.
It is important to keep in mind the difference between an empty
channel and a channel that has received no configuration, but is
named.
* A named channel is technically configured to have a name.
While the `masterPattern`, `slavePattern`, and `patterns`
field have NOT been populated, mbsync assumes that if
master/slave-Pattern are empty that means match against
`INBOX`.
If `patterns` is empty, no patterns are printed.
* An empty channel set is a set that has no channels within
it, but `mbsync.groups.<gName>.channels` is defined.
* mbsync: filter empty groups and correct newlines
First thing, someone can specify that a group is empty. If this is
done, technically a group with channels would be generated at the end.
However, because they were empty and did not exist, whitespacing would
be generated, leading to a usable, but mangled config file.
The `filter` solves this problem by removing empty strings (which are
generated by groups that are empty) from the output strings to place
in the file.
Lastly, because the whitespacing was fixed elsewhere in the file, the
crazy double-newline at the end was changed to a single newline.
However, the double newline within the `concatStringsSep` is still
required, because the list that is being concatenated together is a
list of channel configurations. Each element corresponds to one of the
groups specified, whose contents are the channels specified within.
The double newline is needed because each string element is lacking a
trailing newline, because `concatStringsSep` does not add the
separator to the end of the last element in the list. So, the last
channel to be configured will not have that newline appended when the
channel-configuration list is created, thus, 2 are inserted here.
* mbsync: update test input to use per-account channels
* mbsync: comment how old/new style collision handled
This is left in the test input for now, because I think it is useful
to see why certain things are happening the way they are.
* mbsync: update test output pattern
The test output should now have the correct configuration according to
the way I have specified it in the input file.
* mbsync: use format script on new code
* mbsync: add KarlJoad as maintainer
Co-authored-by: Nick Hu <me@nickhu.co.uk>
The `ExecStart=` option of systemd must take arguments fully quoted.
That is,
"-sshargs=-i somekey"
and not
-ssargs="-i somekey"
Additionally, inside arguments passed to unison, `=` characters must
be quoted. After unquotation by systemd, one must have
-sshargs=-o Foo\=4
instead of
-sshargs=-o Foo=4
The apropos software is useful to get a list of manpages matching a
description or to get a list of all manpages. The latter feature is
used by Emacs to get manpage completion (`M-x man`).
To have apropos working, a database of all available manpages must be
built with mandb. This is what this commits does.
A similar change was done for NixOS:
edc6a76cc0
Running `zplug install` will always product output, even if there is
nothing to do.
Gating it behind a `zplug check` eliminates that output when there is
nothing to do, and is recommended in the zplug README.
Adds a new `keybindings` option to the `vscode` configuration.
It contains a list of key bindings, which will be written to
`%vscode-dir%/User/keybindings.json`.
PR #1351
The previous implementation would allow variables to sneak into the
file names. This commit makes sure the resulting target file path
exactly matches the expected path.
This removes the dependency on the `nixpkgs` channel within the
modules for state version ≥ 20.09. The default Nixpkgs source starting
from this state version is the path of the `pkgs` argument used to
bootstrap the Home Manager modeuls.
This is a prerequisite for using Home Manager withing Nix flakes.
PR #1420
Before the profile commands would not run if a single package is
installed since `buildEnv` will produce a symlink directly to that
package. By adding this dummy package we ensure that a real directory
will be generated.
Fixes#1392
The kakoune editor has a plugin mechanism and several plugins are
already packaged under `pkgs.kakounePlugins`. However, adding these
packages to `home.packages` is not enough: the `kakoune` package needs
to be configured with the list of plugins to include, so that they get
sourced on start-up.
We add a `programs.kakoune.plugins` option, analogous to
`programs.vim.plugins`.
The change is backwards compatible since `pkgs.kakoune` is defined as
wrapKakoune kakoune-unwrapped { };
and `wrapKakoune` defaults the list of plugins to empty.
PR #1356
The git-send-email [0] script uses StartTLS if `smtpEncryption` is set
to `tls`, which can break services that don't support StartTLS.
[0]: bd42bbe1a4/git-send-email.perl (L1533)
PR #1395
Before this change,
```rust
fn main() {
println!("{:?}", glib::get_user_special_dir(glib::UserDirectory::Documents));
}
```
would return `None` even though `~/Documents` is available and
`xdg.userDirs.enable = true`. Checking the differences between
`xdg-user-dirs-update` shows that the latter has quotes around each
thing.
PR #1440
We were passing the separators for the `show-whitespaces` highlighter
verbatim. This was problematic in case one wanted to use, spaces,
quotes or `%` as separators since the resulting kakoune configuration
would be invalid.
According to kakoune's docs, the separator has to be one character
long, so we can use a simple rule for escaping them. It is possible
that people has been working this around by passing, e.g. `"' '"` as
separator in order to get a space (i.e., escaped explicitly by the
user), so we just let longer strings be used verbatim.
PR #1357
This makes the systemd module use the sd-switch application to perform
the unit switch during a generation activation.
Since the closure of sd-switch is relatively lightweight we
unconditionally pull it in as a dependency. We simultaneously remove
the `systemd.user.startServices` option and perform the switch action
automatically.
PR #1388
The previous fish integration for starship erroneously used parts of
POSIX-esque test syntax. It also used `-n` instead of `-z` to check
for an unset variable.
PR #1422
When running the service start script with `DISPLAY` set, a `gi`
import error is triggered. Blanking the variable will make the script
use a different code path that does not attempt to import `gi`.
Also moves activation script up into start of script instead.
PR #1415
The option to remove the default keybindings by setting the
`programs.qutebrowser.enableDefaultKeybindings` variable to `false`
had a list wrapped around the `config.py` line. This would cause a
type coercion error.
PR #1410
This option can be used to enable optional Spotifyd features, such as
looking up the Spotify password in the system keyring or enabling
MPRIS support.
PR #1390
Before the profile directory value would point directly to the build
output in the Nix store. Unfortunately this would cause an infinite
loop if the user's configuration directly or indirectly refers to the
profile directory value.
Fixes#1188
Emacs populates 'exec-path' at launch from the 'PATH' environment
variable. Likewise, the emacs derivation from nixpkgs populates
'load-path' from the 'NIX_PROFILES' variable. As neither of these are
available by default in the systemd user manager, revert to the
previous behavior of launching the Emacs daemon from a login shell.
Fixes#1354Fixes#1340
PR #1355
Add 'services.emacs.socketActivation.enable' for generating an
'emacs.socket' systemd unit.
Emacs since version 26 has supported socket activation, whereby an
external process manager such as systemd listens on a socket and passes
it to the Emacs daemon when the manager launches it. This improves
startup time of the user session and avoids launching the daemon when not
needed, for example when launching the user session via SSH.
This implementation hard-codes the socket path to the default for the
version of 'programs.emacs.finalPackage', because systemd does not
perform shell expansion in the socket unit's 'ListenStream' parameter
and it seems like an advanced use-case to change the socket path. Shell
expansion would be desirable as the socket path usually resides in
directories such as $XDG_RUNTIME_DIR or $TMPDIR.
Tests were added to verify behavior in the following cases:
- Emacs service with socket activation disabled
- Emacs 26 with socket activation enabled
- Emacs 27 with socket activation enabled
PR #1314
This change stops update-mime-database from running unless the
`share/mime/packages` directory is writable. For some reason it
appears to be read-only on WSL1.
Fixes#1192
This adds an empty `nix-build` command to verify that the user is
having a good Nix install. It also, as a side effect, will create the
necessary per-user `profiles` and `gcroots` directories.
Fixes#1246
Using the `nix-env` command is far more robust. It also has the
benefit that if the per-user `profiles` and `gcroots` directories do
not exist then they will be created with the correct permissions.
Because of the second point this commit also removes the `mkdir` step
of the installation instructions.
PR #1239Closes#474, #948, #1091
Add an option to enable a .desktop file for the Emacs client.
PR #1223
Co-authored-by: Michael Lingelbach <m.j.lbach@gmail.com>
Co-authored-by: Robert Helgesson <robert@rycee.net>
Using this function it is possible to make `home.file` create a
symlink to a path outside the Nix store. For example, a Home Manager
configuration containing
home.file."foo".source = config.lib.file.mkOutOfStoreSymlink ./bar;
would upon activation create a symlink `~/foo` that points to the
absolute path of the `bar` file relative the configuration file.
PR #1211
Otherwise, the pager (typically `less`) pauses execution of
`home-manager switch` until the pager is dismissed, if the content is
larger than would fit on the screen.
PR #1175
This switches the type of `matchBlocks` from `loaOf` to `listOrDagOf`.
The former has been deprecated in Nixpkgs. The latter allows
dependencies between entries to be expressed using the DAG functions.
Add a new 'bookmarks' option, for managing `~/.config/gtk3/bookmarks`,
a list of URIs to display as bookmarks in the sidebar of GTK file
browsers.
PR #1129
Nixpkgs no longer packages compton, and instead packages picom, a
(mostly) compatible fork of compton, providing an alias from compton
to picom. Because some configuration options have been changed, and
all references to "compton" have been made deprecated and replaced
with "picom", 'services.compton' has been deprecated in favor of the
new 'services.picom'.
Resolves#878
PR #1101
- Pass arguments verbatim to the `systemctl` subprocess, obviating the
need for shell escaping.
- Use open3 for capturing subprocess output.
- Fix printing of commands during dry run.
- Simplify `X-RestartIfChanged` regular expression.
1. Use \s to match whitespace, \b to match a word boundary.
2. Rename variable to conform to Ruby's underscore naming
conventions.
- Remove no-op set operation. Specifically, 'no_restart' and 'to_stop'
are disjunct since
1. After reloading the daemon with the new generation, units in
'to_stop' (i.e. units from the old gen that are missing in the
new gen) are not registered anymore in the systemd daemon.
2. Hence, 'systemctl cat' returns no output for these units.
3. Because this output is needed to detect 'no_restart' units,
'no_restart' includes no units from 'to_stop'.
So 'to_stop -= to_restart' is a no-op.
- Only notify about units that would otherwise be restarted. That is,
exclude units that are started but not restarted.
- Previously, all inactive units, like short-running services, were
handled as failed units.
Now systemd activation doesn't fail for oneshot services like
'setxkbmap' while 'servicesStartTimeoutMs' is set.
- Don't start unchanged oneshot services.
PR #1110
Enabling this flag for a `home.file` entry causes the target to be
unconditionally overwritten. The option is not visible in
documentation for now and shouldn't be relied on for general use.
Add 'services.lieer', which generates systemd timer and service units
to synchronize a Gmail account with lieer. Per-account configuration
lives in 'accounts.email.accounts.<name>.lieer.sync'.
Add 'programs.lieer', a tool for synchronizing a Gmail account with a
local maildir and notmuch database. Per-account configuration lives in
'accounts.email.accounts.<name>.lieer'.
This allows the ability to provide arguments to a function, such as
`--on-event` in order to trigger a function on the
`fish_command_not_found` event, for example.
PR #1063
When setting values using the `git config --set` command, git formats
the file a bit differently. This changes the output so it maps to that
format.
Differences:
* each `key = value` in a section is prefixed by a tab character
* the `=` between the key and the value is surrounded by spaces
PR #1069
Unfortunately the document generator is not smart enough to quote the
`..` alias in the documentation which is very misleading. By making it
a literal example the quotes stay.
This change allows the entire repo to be imported directly. Some plugins (such
as oh-my-fish's vi-mode) have extra files that are referenced by the plugin
itself. This means we cannot create a generic plugin file structure out of the
plugins that exist currently.
The section headers help show where each section came from when looking at the
generated config. Added a note about how the config was generated in the
generated file.
This resolves the error
The option `accounts.email.accounts.xyz.neomutt.sendMailCommand`
is defined both null and not null, in
`…/home-manager/modules/accounts/email.nix' and
`…/home-manager/modules/accounts/email.nix'.
that would occur previously when both neomutt and msmtp were enabled
for an account.
This adds a service module for [grobi](https://github.com/fd0/grobi),
which can be used to automatically configure monitors/outputs for Xorg
via RANDR.
This allows pkgs to be overridden in such a way that `<nixpkgs>` is
never imported, allowing home-manager to be used in environments where
`NIX_PATH` is not set.
PR #993
This change makes use of the `extend` function inside `lib` to inject
a new `hm` field containing the Home Manager library functions. This
simplifies use of the Home Manager library in the modules and reduces
the risk of accidental infinite recursion.
PR #994
Given an inner type, the former function generates a type that expect
DAG option values. The latter function is only present to temporarily
allow the `programs.ssh.matchBlocks` to keep accepting list values.
The `programs.neovim.configure` option is consistent with NixOS's
`wrapNeovim` and offers features not supported by the `extraConfig`
and `plugins` option pair.
Closes#971
The old method for hiding the error no longer works in NixOS 19.09,
and ends up breaking blueman-applet entirely. Enable the NixOS service
instead.
Pull request #950
On NixOS it is necessary to set `bgSupport = true` when creating a
Home Manager desktop manager session. Otherwise NixOS will add code
that sets the background, overriding the effort made by the
`random-background` module.
Fixes#955
Pull request #956
In the case where `/nix` is a link, for example, on macOS Catalina,
`builtins.storeDir` returns `/nix`, not the canonical location.
This causes tests on existing files to result in Home Manager thinking
those files are outside of the store.
This change uses `readlink` on the store path so that the tests work
as intended.
The Astroid program can work without this option,
which should be disabled when synchronising emails with muchsync for example.
This reverts commit fa3d1f98e0.
- Default value is set to static '$HOME/.zsh_history' -- dotDir is not
prepended anymore
- $HOME is not prepended to the option value
- Ensure history path directory exists
Fixes#886, replaces #427.
This allows specifying, for example, the music directory using path
literals without causing the directory to be copied to the Nix store.
Suggested-by: Silvan Mosberger <infinisil@icloud.com>
The [throw-keyids](https://www.gnupg.org/gph/en/manual/r2110.html)
option "hides the receiver of the encrypted data as a countermeasure
against traffic analysis." However, it also slows down decryption, and
even breaks some applications; see e.g.
https://github.com/open-keychain/open-keychain/issues/626
I think the sane default would be to leave it off, just as it is off
by default in gpg. The typical user will probably not need this level
of security, and will probably prefer a better user experience (faster
decryption and compatibility with a wider range of applications).
Closes#838
MPD is using syslog for its logging output, while it could directly
log to systemd's journal, as this daemon is primarily used as a
systemd user service. This change makes MPD log to standard output,
which is captured by systemd.
See https://github.com/NixOS/nixpkgs/pull/57608, which does the same
thing to NixOS's MPD service.
This change allows to pass custom packages into the `vim.plugins`
option.
Additionally this adds a deprecation warning and an error message if a
vim plugin is not present. This is an improvement because the user
gets instant feedback, when a plugin is not found.
This makes the
programs.firefox.package
option take a pre-wrapped Firefox package as value if state version is
set to "19.09" or later. This should make the Firefox module work with
a wider range of Firefox packages.
enableCompletion option not only calls compinit but also adds
nix-zsh-completions package to home.packages which should still happen
even if oh-my-zsh is enabled.
The double compinit call will still be eliminated by moving guarding condition
down to the compinit call itself.
Fixes#771.
This patch started by addresssing the code review comments to close
https://github.com/rycee/home-manager/pull/290. However initiating a new
pull request it became clear, that home-manager changed significantly
since then.
This changes the initial pull request to be consistent with the email
account management in home-manager now. It also adds a simple test and support
for multiple accounts.
Because `extraPackages` and `overrides` expect functions as values it
has not been possible to perform merges. This adds suitable types for
these options that allow reasonable merging.
When a configuration file would be written to an existing file, rather
than failing switch (and having the user have to move or delete those
files), move the files automatically to a new path.
Closes#585
In particular, don't add trailing backslashes introduced by
`xautolockExtraOptions`. Systemd's unit file parser seems to have
gotten a bit stricter and with systemd 242, the trailing backslash
caused the next non-empty line to be ignored.
In that case, this was `[Section]`, so all subsequent settings were
mistakenly added to `[Service]`, causing them to be ignored entirely.
Simplify and fix this by using `concatStringsSep` to build a single
`ExecStart` line.
This fixes a build error occurring when building a configuration
having fontconfig enabled and `home.packages` only containing one
package installing things to `/lib`.
Also adds a number of test cases to verify the fontconfig cache
generation functionality.
Fixes#703
Add parens to expression so the `-exec` includes files matching both.
Otherwise (before this change) the `-exec` is only invoked for
links (`-type l`):
file or (link -> doexec)
=>
(file or link) -> doexec
Also deprecates the `fonts.fontconfig.enableProfileFonts` option. The
configuration is now always generated if `fonts.fontconfig.enable` is
set.
Fixes#520
Unfortunately, using `attrsOf` is not possible since it results in too
eager evaluation. In particular, the
home.sessionVariables = {
FOO = "Hello";
BAR = "${config.home.sessionVariables.FOO} World!";
};
example will cause an infinite recursion.
This commit restores the option type of
- `home.sessionVariables`,
- `pam.sessionVariables`,
- `programs.bash.sessionVariables`, and
- `programs.zsh.sessionVariables`
to `attrs`. It also adds test cases for the above options to avoid
regressions.
Fixes#659
Having this in the unit file will prevent the file from being
restarted if a change is detected. This is useful if data loss may
occur if the unit is suddenly restarted. For example, restarting the
Emacs service may result in the loss of unsaved open buffers.
This should allow more sensible merging behavior. In particular, with
this change it is possible to use, for example, `mkForce` for greater
control of merging.
Fixes#543
When using the NixOS module we cannot guarantee that the Nix store
will be writable during startup. Installing the user packages through
`nix-env -i` will fail in these cases.
This commit adds a NixOS option `home-manager.useUserPackages` that,
when enabled, installs user packages through the NixOS
users.users.<name?>.packages
option.
Note, when submodule support and external package install is enabled
then the installed packages are not available in `~/.nix-profile`. We
therefore set `home.profileDirectory` directly to the HM profile
packages.
This removes the `nixosSubmodule` option in favor of a new option
`submoduleSupport.enable`. This name better indicates that the
submodule mode applies to both NixOS and nix-darwin.
On non-x86 architectures (for example, aarch64) the installation of
home-manager fails indicating that it is attempting to select i686
packages for Linux and those aren't available.
Solution: make the condition for choosing these packages stricter
Makes fish use global scope for abbreviations.
This makes it so that they don't stick across config changes.
Before, an abbreviation would still exist even if removed from the config.
In particular support source files whose name start with `.` or
contain characters not allowed in the nix store, such as spaces.
Also add some test cases for `home.file`.
This patch allow to define custom msmtp options per email account. For
example: to change the "auth" method from "on" to "login", add
`msmtp.extraConfig.auth="login"`.
Add option "extraLocalVars" for additional local variable definitions
in .zshrc, at the top of the file.
Some zsh plugins/themes expect configuration in local variables before they
are loaded (example: https://github.com/bhilburn/powerlevel9k). Exporting
those clutters the environment and is unnecessary.
Use the new module lib.zsh to generate export statements in zsh syntax, using
zsh arrays for lists.
Being a zsh script, this seems more intuitive for .zshrc
Added utilities to generate export statements and definitions for zsh scripts.
Currently, there is only lib.shell which generates export statements in bash
syntax. However, this does not allow to generate export statements for zsh
arrays (syntax: NAME=(elem1 elem2 ...) ), which would be the natural
representation of lists in the nix language.
All default keybindings should have a default priority attached to them.
This will allow users to redefine some of the default keybindings
without using mkForce. Fixes#485.
Instead of using the hostname `%h`, which can be changed by the
~/.ssh/config file, use the commandline-given hostname `%n`.
This allows to alias a host with different hostnames, which then point
to different configurations. A common use-case for this is if you have
multiple accounts on github with each access to different private repos:
Host github.com
IdentitiesOnly yes
User git
IdentityFile ~/.ssh/id_rsa
Host customer.github.com
IdentitiesOnly yes
User git
IdentityFile ~/.ssh/customer
HostName github.com
Without this change, if a connection was established with the first
github.com alias, then the user would try to pull a repo from the second
account, ssh would re-use the SSH connection which doesn't have access
to that repository.
This commit adds the tmux program to Home Manager.
In addition to configuring tmux, a user may specify tmux plugins from
Nixpkgs. These can be included in the list of `plugins` and can either
be a package (all tmux plugins live under `nixpkgs.tmuxPlugins.*`), or
an object which includes the plugin and an `extraConfig`, which will
be run immediately after sourcing the tmux plugin.
Finally, this commit introduces two nested programs which may be
enabled which depend on tmux: tmuxp and tmuxinator. These do not have
the ability to be configured, although this may be a future
contribution.
This reverts the commits
- "alot: change msmtp default command"
8e798e4c28
- "astroid: init"
736e340bde
because they include changes that break some configurations and some
options that are misplaced.
The current documentation does not provide guidance to users on how
systemd units are defined in Home Manager. A user may expect the
configuration to be similar to NixOS, when it actually differs.
Fixes#418
The ExecStartPost command is currently started when the mbsync is
invoked succesfully. However, we typically want to run something like
'mu index' or 'notmuch new' after mbsync completes. This changes the
unit type to oneshot, so that the ExecStartPost command is run after
mbsync finishes succesfully.
To allow supporting more advanced configurations. The local refers to
the "maildir store" configuration, remote to the "IMAP store", and
"channel" to the channel.
This option allows overriding the default script path `~/.xsession`.
On NixOS, this is needed to allow multiple possible graphical login
sessions.
Fixes#391.
This allows you to specify your own custom commands
to be run when calling fzf. You might use tools like
fd to search faster and take `.gitignore` files into
consideration.
This reverts commit d5bbbbd41d.
This was premature, the example will not emit a terminal newline and
it is not clear whether it is a good idea to force this limitation.
This reworks the way program specific email account options are
specified. In particular, we no longer use the deprecated `options`
field of `mkOption`. Instead submodules are used.
In particular, don't bother attempting to do substitution of the home
files and home generation derivations since these rarely, if ever,
could be substituted.
Fixes#330
This adds a general module infrastructure for configuring email
accounts. The intent is to specify high level information such as IMAP
and SMTP hostnames and login information so that more specific program
and service modules do not have to duplicate options for specifying
accounts.
It is allowed for modules to inject further options within this
namespace where relevant. For example, an MUA may wish add an option
to add per-account filter rules.
Co-authored-by: Matthieu Coudron <mattator@gmail.com>
By default, i3-msg gets socket from X11 property
which is not available when home manager is running
as nixos module.
This patch changes i3-msg command call by specifying
all i3 sockets found in $XDG_RUNTIME_DIR/i3 folder.
Fixes#252.
This removes the need for monolithic unit definitions and allows
users to modify existing units.
Example:
```
{
systemd.user.services.owncloud-client.Unit.OnFailure = "my-notify-service";
}
```
Unfortunately this duplicates some code from NixOS but it does allow
much more flexibility and, hopefully, stability in the Home Manager
documentation.
Fixes#254.
This is needed to support overriding these options inside match
blocks. A new option `programs.ssh.extraOptionOverrides` has been
added to allow global overrides.
This option enables a GPG Agent restricted socket (aka "extra-socket"), which
can be used to forward GPG Agent over SSH.
Additionally `verbose` option enables verbose output of an `gpg-agent.service`
unit for easier debugging.
See: https://wiki.gnupg.org/AgentForwarding
It is safest to use the system install of Nix since that will be
compatible with the running nix-daemon and/or databases.
Also add a printout of the used Nix version in the activation script
when running in verbose mode.
Fixes#218.
Curiously the `who` command sometimes does not list logged-in users,
resulting in systemd not being reloaded. Instead we use
systemctl --user is-system-running
to more directly detect whether systemd is running.
The preferred method of theming rofi is now to use "rasi" theme files.
This commit therefore downplays the colors option and introduces the
theme option.
This is a NixOS module that is intended to be imported into a NixOS
system configuration. It allows the system users to be set up directly
from the system configuration.
The actual profile switch is performed by a oneshot systemd unit per
configured user that acts much like the regular `home-manager switch`
command.
With this implementation, the NixOS module does not work properly with
the `nixos-rebuild build-vm` command. This can be solved by using the
`users.users.<name?>.packages` option to install packages but this
does not work flawlessly with certain Nixpkgs packages. In particular,
for programs using the Qt libraries.
Adds a service for the Stalonetray system tray.
Configured through a 'config' attribute set, which writes space
separated key value pairs on successive lines to `~/.stalonetrayrc`.
Very simple module for hg based on programs.git, and is intended to have
compatible options. For simple setups, a user should be able to write
something like:
{...}:
let vcsconfig = {
enable = true;
userName = "John Smith";
userEmail = "js@example.com";
ignores = [ "*.swp" "*~" ];
};
in
{
programs.git = vcsconfig // {...extra git config...};
programs.mercurial = vcsconfig // {...extra hg confg...};
}
For this reason, the ignore options are `ignores` for `syntax: glob`
and `ignoresRegexp` for `syntax: regexp` so that simple glob ignores
can (very likely) be shared with a git config, despite regular
expressions being the default for mercurial.
This variable adds some extra flexibility in constructing the
`~/.bashrc` file. Currently the option is hidden from public
documentation since the option name is provisional.
In certain cases it makes sense to override the target username and
home directory. In particular, if you're building a configuration for
a remote profile.
This adds the option `home.emptyActivationPath` that, when enabled,
will cause the activation script to ignore the calling user's `PATH`.
The option is disabled by default to match current behavior but the
intent is to change this in the future to reduce risk of accidental
dependencies of the environment.
This avoids a conflict for when the user has an xmonad package
installed through `haskellPackages.ghcWithPackages`, which is
necessary for wanting to load the xmonad config with ghc.
This adds a Parcellite service. It has no configuration options, since
the app has its own mutable preferences dialog, which unconditionally
replaces `~/.config/parcellite/parcelliterc` when preferences are
saved.
Unfortunately systemd derives nonsensical unit names when the unit
file is a link to a link to a file. This commit ensures that any file
whose target path matches the pattern `*/systemd/user/*` will be
reachable with only one link hop.
This also reverts f52ec0df7c, which
contained a temporary fix. This commit is an improvements in that it
is more explicit and also handles unit files given directly as a home
file source.
This is done by exploiting the fact that home files will be copied if
the executable bit of the source file and the target file is
different. This should be considered a hack until some nicer solution
is found.
By sanitizing the home file name in the derivation name, the home file
name is no longer exposed to the naming restrictions for nix store
paths.
For example, it is now possible to define home files with spaces in
their names without providing a target or source attribute.
This removes the deprecated use of `xsession.windowManager` as a
string.
This commit also adjusts the xmonad module to become a full module.
I.e., the backwards compatibility hack was removed.
Forcing fpath to contain unique values increases startup speed by
eliminating extra work of processing duplicated folders.
In addition, it increases startup time when zsh is enabled in both
system and home configuration due to having the same fpath value
between different compinit calls.
Fixes https://github.com/rycee/home-manager/issues/108.
Fixes the error
error: syntax error, unexpected $undefined, expecting IND_STR or
DOLLAR_CURLY or IND_STRING_CLOSE, at
.../home-manager/modules/programs/home-manager.nix:70:47
When enabled this module will cause Home Manager to manage the user
environment XDG variables. When disabled, then Home Manager will use
the XDG variables taken from the user environment.
Before this path would point to the modules path. Using the project
root instead makes it possible to set `<home-manager>` to point to a
downloadable archive of Home Manager. This should make it
significantly easier to install and keep Home Manager up to date.
To match this change we also deprecate the Home Manager option
programs.home-manager.modulesPath
and instead ask users to use
programs.home-manager.path
Note, we still pull in the user's `PATH` in case the user has defined
their own activation blocks that depend on additional tools.
Eventually this will be deprecated and removed.
See #99.
The new options allow some control over automounting, notifications,
and the tray icon.
This commit also changes the defaults to automatically mount new
devices, udiskie was previously told not to automount. The change in
behavior is to closer match the default options.
This option gathers basic Vim options into a single place. The idea is
to allow many options without making the Home Manager documentation
too verbose.
This also deprecates the options `programs.vim.lineNumbers` and
`programs.vim.tabSize`.
Fixes#69.
The intention is for the `xsession.windowManager` option to be
available for full modules in the future. The option
`xsession.windowManager.command` should now be used to specify the
window manager startup command.
This adds a readonly package option which will be set to the resulting
configured vim package, so it can be refered to by other configuration.
An example would be home.sessionVariables.EDITOR =
config.programs.vim.package + "/bin/vim".
Same motivation as in https://github.com/NixOS/nixpkgs/pull/28378.
zsh.initExtra parameter can be used by external modules which can
redefine user aliases. This change will give user-defined aliases
the highest priority.
This command allows the user to examine the news items generated by
the news module. See #52.
Many thanks to @nonsequitur and @uvNikita for suggestions and
improvements.
1. It slows down the initial start: it takes around 2s at first launch,
and around 0.25s for the following launches;
2. It seems to be redundant since just installing zsh package gives
working completions with correct $fpath set.
Technically not necessary but it was a bit silly to leave out this
important directory from the generation directory. This also makes it
more convenient to browse the installed packages after a
`home-manager build`.
With --ignore-fail-on-non-empty, non-emptiness is the only failure
that gets ignored by rmdir. In the case that rmdir reaches $HOME and
considers deleting it, it will detect insufficient permissions and
subsequently exit with an error, even if $HOME is not empty.
Prevent this by calling rmdir with a relative path that excludes
$HOME.
We must only follow the symbolic link once (i.e., not use the `-e`
option) since otherwise the pattern will not match when
`home.file.xyz.source` is a directory.
If the `home-manager` module is enabled then check if the
`home-manager` package is installed using `nix-env -i` and if so then
it is automatically uninstalled before the new package environment,
which includes home-manager, is installed.
This module is a module to install and configure the home-manager
tool. By managing the home-manager tool through the Home Manager
module system it will be installed/updated on configuration
activation.
Problem
-------
We resolve symlinks from inside `/nix/store/HASH-home-manager-files`
into the nix store as `/nix/store/HASH-DRVNAME` which does not match
the pattern.
This happened to me because I pull in some repos in via `home.file`.
The `home-manager-files` derivation links to the repo's derivation in
the nix store. For example:
let nanorcs = fetchFromGitHub {
owner = "scopatz";
repo = "nanorc";
…
}; in [
{
target = ".nano";
source = nanorcs;
}
{
target = ".nanorc";
source = "${nanorcs}/nanorc";
}
]
Solution
--------
Call `readlink` without `-e` to obtain only the first redirection from
`~` to `/nix/store/HASH-home-manager-files`.
When a file has disappeared between the previous and the next
generations then its symlink in `$HOME` is typically deleted. With
this commit we refuse to delete the path unless we are reasonably
certain it is a symlink into a Home Manager generation.
This is a module for managing the GNU info directory for the user
profile. See comments at the top of `modules/programs/info.nix` for
further information.
This commit causes an error to be printed if running under a non-Linux
system when a systemd service, target, or timer is active.
It will also prevent running systemd during activation if running
under a non-Linux system.
In the activation script we expect to use the tools provided by GNU
Core Utilities and GNU Bash. This commit therefore explicitly add
these first in the `PATH` environment variable.
This module generates a `.ssh/config` file. This doesn't embed _all_
options for the ssh client, but the most common ones should be there.
Example usage:
```nix
programs.ssh = {
enable = true;
forwardAgent = true;
controlMaster = "auto";
matchBlocks = [
{
host = "something.blah.edu";
port = 1024;
user = "cleague";
identitiesOnly = true;
}
{
host = "host1 host2 host2.net host2.com";
port = 7422;
hostname = "example.com";
serverAliveInterval = 60;
}
{
host = "lucian";
forwardX11 = true;
forwardX11Trusted = true;
checkHostIP = false;
};
};
};
```
Each entry in `programs.ssh.matchBlocks` must contain a `host` field,
which will be used for the block condition.
This should reduce the risk of overwriting an existing file in the
user's home directory. A file will only be replaced if it is a link
pointing to a home-manager tree inside the Nix store.
If an existing file is detected an error is written indicating the
file's path and the activation will terminate before any mutation
occurs.
Fixes#6
Previously the home files were not linked if the generation hadn't
changed. Unfortunately, this would mean that, if a file link was
removed for some reason it would not be recreated by running a switch
command.
For example, with these settings Bash will complain if uninitialized
variables are used. Some code has been improved to run cleanly with
these settings.
Nix does not allow files whose name start with a '.' in the Nix store.
This commit makes a not of this fact in the `home.file.source` option
and also adds an assertion verifying that no such file is given.
Closes#4
If the dconf service hasn't been installed then the configuration
activation will fail. Thus, make sure the activation script is run after
packages have been installed.
If no files should be installed into the home directory then an error
would occur since the directory holding the files would never be
created. With this change the directory is unconditionally created.
This adds a `graphical-session-pre` target for things that need to run
just before the main session starts. Also adds a loop during shutdown
that waits until all deactivating units are gone. Inspired by
<https://youtu.be/hq18daxTkLA>.
