Commit Graph

717 Commits

Author SHA1 Message Date
suigin
38af006b5e Changed type for UTF-32 codepoints from long to uint_least32_t 2015-05-06 08:15:41 +02:00
noname
c990abfedf Fix empty selection highlighting bug.
When user clicks LMB, one character is selected, but will not be copied
to selection until the user moves cursor a bit. Therefore, the character
should not be highlighted as selected yet.

Before the patch, the trick was not to mark line as dirty to avoid
highlighting it. However, if user has already selected something and
clicks in line that contains selection, selclear sets the line as dirty
and one character is highlighted when it should not.

This patch replaces dirty trick with explicit check for sel.mode inside
selected().
2015-05-04 12:06:43 +02:00
noname
3cb7f27afe Fix indentation. 2015-05-04 12:00:10 +02:00
noname
1811b6030c Add enumeration for sel.mode
This patch also prevents sel.mode from increasing beyond 2. It is almost
impossible, but sel.mode may overflow if mouse is moved around for too
long while selecting.
2015-05-04 11:57:17 +02:00
noname
22571ea4e8 selnormalize: make special case explicit
Special case is when regular selection spans multiple lines.
Otherwise, just sort sel.ob.x and sel.ob.y.
2015-05-04 11:47:53 +02:00
noname
8751809aff selsnap: simplify SNAP_LINE case
Also make sure y never exceeds term.row-1 even if ATTR_WRAP is set for
some reason.
2015-05-04 11:41:55 +02:00
noname
765bb0fd14 Remove first argument of selsnap. 2015-05-04 11:16:08 +02:00
Jochen Sprickerhof
07ce96a3a0 Fix sigchld
Only wait for termination of the shell.
2015-05-04 10:57:40 +02:00
mvdan@mvdan.cc
190b94c7a2 len assignment is never used
Signed-off-by: Daniel Martí <mvdan@mvdan.cc>
2015-04-27 10:10:30 +02:00
mvdan@mvdan.cc
4f21c41a1c Clarify calculation precedence for '&' and '?'
Signed-off-by: Daniel Martí <mvdan@mvdan.cc>
2015-04-27 10:09:49 +02:00
mvdan@mvdan.cc
3a5053f6c1 Use %u for uint
Signed-off-by: Daniel Martí <mvdan@mvdan.cc>
2015-04-27 10:09:15 +02:00
suigin
7ab6c92e18 Optimize memory footprint of line buffers 2015-04-27 10:05:14 +02:00
noname@inventati.org
0622ad9bad Make tputc, tsetchar and techo accept unicode 2015-04-27 09:50:40 +02:00
noname@inventati.org
21f765426c Change internal character representation. 2015-04-27 09:50:01 +02:00
noname@inventati.org
753fe862b1 Remove last parameter of utf8encode
This parameter was always UTF_SIZ, so it is better remove it and
use directly UTF_SIZ in it.
2015-04-27 08:59:45 +02:00
noname@inventati.org
61c35cd246 Use utf8len instead of utf8decode. 2015-04-27 08:58:37 +02:00
alp@alexpilon.ca
742a41d655 Make build shut up about system() without return value check.
st.c:1321:2: warning: ignoring return value of function declared with warn_unused_result attribute [-Wunused-result]
            system(cmd);
            ^~~~~~ ~~~

Debatable whether an error here should case exit(EXIT_FAILURE). Just
preserving the existing behaviour for now.
2015-04-27 08:57:51 +02:00
Roberto E. Vargas Caballero
f36dd277a2 Merge remote-tracking branch 'origin/master' 2015-04-23 17:59:39 +02:00
Roberto E. Vargas Caballero
0d7448dabc Fix segmentation fault in strhandle()
We cannot pass strescseq.args[0] to atoi when nargs is zero,
because in this case it will be null.
2015-04-23 17:59:10 +02:00
Roberto E. Vargas Caballero
b17aa18f7c Uses a &[] pointer loop instead of + pointer loop 2015-04-23 17:59:10 +02:00
noname@inventati.org
736685d641 Do not set terminal title based on stty arguments. 2015-04-23 17:59:10 +02:00
noname@inventati.org
89807ed453 Move common code to xloadcolor 2015-04-21 09:48:33 +02:00
noname@inventati.org
84c756b97e Use LEN(dc.col) instead of LEN(colorname).
LEN(colorname) may be below 256 for some configurations.
2015-04-21 08:13:46 +02:00
noname@inventati.org
2fdcc5e5f6 Remove WIN_REDRAW flag.
WIN_REDRAW flag was not used since introduction of Xdbe
in commit 94771d0588
2015-04-21 07:49:07 +02:00
noname@inventati.org
ab69ea89b7 Place memset arguments in the correct order. 2015-04-20 09:29:24 +02:00
noname@inventati.org
5528280fae Remove explicit 'return' from 'void' functions. 2015-04-20 09:28:14 +02:00
noname@inventati.org
6dc2b546ec Increment accuaracy in drawtime calculation
This way is a bit more accurate.
2015-04-20 09:20:35 +02:00
noname@inventati.org
c27c731b9f Monotonic clock cannot jump backwards.
The check was introduced back when st used gettimeofday.
The condition is also modified to increment the accuaracy of the
calculation.
2015-04-20 09:18:40 +02:00
noname@inventati.org
6ee56d6590 Place tlinelen type on separate line. 2015-04-20 08:30:49 +02:00
Roberto E. Vargas Caballero
215bdb2da3 Add tty line support
Not always is desirable to create a pseudo terminal, and some times
we want to open a terminal emulator over a tty line. With this new
patch is possible to do someting like:

	$ st -l /dev/ttyS0 115200

Without this option was needed to launch another terminal emulator
over st (for example minicom, picocom, cu, ...).
2015-04-15 10:52:44 +02:00
sin
56abffb4b6 Fix memmove() invocation with src/dst being NULL
This fixes a segmentation fault on some systems.
2015-04-15 10:51:00 +02:00
noname@inventati.org
aff35af275 Use as command arguments the remaining parameters
This change allows execute st as 'st mutt' while it keeps the
compability with xterm and urxt.
2015-04-14 09:55:15 +02:00
Roberto E. Vargas Caballero
83e73c6242 Merge branch 'master' of ssh://suckless.org/gitrepos/st 2015-04-14 09:47:19 +02:00
Markus Wichmann
42fa1f5ce4 Implement most ICCCM rules for selection handling.
ICCCM mandates the use of real timestamps to interact with the
selection, to rule out race conditions if the clients are run at
different speeds. I have implemented the low hanging fruit, putting the
timestamps into text selection. Also, ICCCM mandates a check for whether
XSetSelectionOwner() worked. Not sure my version is correct, though.
2015-04-13 22:18:45 +02:00
Roberto E. Vargas Caballero
23ed12857f Merge branch 'master' of ssh://suckless.org/gitrepos/st 2015-04-13 22:01:40 +02:00
noname@inventati.org
9eb70a2d3e Do not use tmoveto in tputtab.
tmoveto resets CURSOR_WRAPNEXT.

Simple testcase:

for i in $(seq 1 200); do
	printf '\t.';
	usleep 100000;
	printf '\t@';
	usleep 100000;
done

In st executing this script causes @ and . to overwrite each other in
the last column.
2015-04-13 21:33:36 +02:00
noname@inventati.org
9619760e12 tresize: remove unnecessary if 2015-04-13 17:12:49 +02:00
noname@inventati.org
b94ad75e5d Remove 'titles' variable.
We do not free it until exit anyway.
2015-04-13 17:00:08 +02:00
noname@inventati.org
e6dd0f825d Remove useless if in tstrsequence. 2015-04-13 15:17:24 +02:00
noname@inventati.org
b0310fba5d Simplify tmoveto.
LIMIT returns value. This fact is already used in x2col and y2row.
2015-04-13 15:15:47 +02:00
noname@inventati.org
9d1495f9ee Fix typo.
It seems that LICENSE files are more common than LICENCE files.
At least this patch makes spelling consistent.
2015-04-13 14:26:01 +02:00
noname@inventati.org
c569e3146e Remove 'slide' variable in tresize. 2015-04-13 10:18:08 +02:00
noname@inventati.org
39ae1a4de5 Move tresize comments around. 2015-04-13 09:26:03 +02:00
noname@inventati.org
6352502d64 tresize: move for loop outside if
There is no need to check that slide > 0 before executing loop.
If slide <= 0, loop stops immediately.
2015-04-13 09:21:03 +02:00
noname@inventati.org
b9390a5496 Simplify loop condition. 2015-04-13 09:20:00 +02:00
noname@inventati.org
d2937b05ae Remove unnecessary XFilterEvent call.
XFilterEvent usually filters KeyPress events according to input method.
At this point the window is not mapped. The only events that we process
are ConfigureNotify and MapNotify. They should not be filtered by input
method.
2015-04-13 09:17:06 +02:00
noname@inventati.org
d3e0f3444b Use do..while in window mapping loop. 2015-04-13 09:15:42 +02:00
Omar Sandoval
ecac5ee35e Make DECSCUSR thickness configurable 2015-04-10 23:43:05 +02:00
noname
93b54cfcc4 Use MAX macro where possible. 2015-04-10 23:34:06 +02:00
noname
6f5f770186 Remove 'xloadfontset' function.
It was used only once and its return value was ignored.
2015-04-10 23:31:53 +02:00
noname
6524f022f7 Remove keywords from function definitions. 2015-04-10 23:28:21 +02:00
noname
9305f3c184 Remove variable names from function declarations. 2015-04-10 23:28:16 +02:00
Roberto E. Vargas Caballero
5bb90125c8 Remove redundant control check
control was set, but it was not ever used because it was set
again some lines later.
2015-04-06 10:55:00 +02:00
noname
69d1fe06a9 Fixed STR sequence termination condition
ascii code may only be checked for characters that have length equal to
1, not width equal to 1
2015-04-06 10:52:47 +02:00
Roberto E. Vargas Caballero
288f80cb06 Remove strsep() call
strsep() is not a POSIX function, and it means that every system
needs different defines to expose it. If the prototype of strsep
is not exposed then an ugly int/pointer is done and it might mean
a crash. The best solution?, to remove the strsep and make a custom
loop. If C programmers cannot do this kind of loops without calling
a library function, then maybe we should move all the suckless
software to Java.
2015-03-20 07:29:28 +00:00
Roberto E. Vargas Caballero
c9357a8edf Merge remote-tracking branch 'origin/master' 2015-03-19 08:36:50 +00:00
LemonBoy
580302f317 Support the DECSCUSR CSI escape sequence 2015-03-19 05:36:54 +00:00
Alex Pilon
b341e51351 Handle pasting of empty selection.
Otherwise, pasting the X11 primary selection when empty results an
error and Xlib forcibly exits.

Signed-off-by: Christoph Lohmann <20h@r-36.net>
2015-03-16 20:31:15 +01:00
Roberto E. Vargas Caballero
86d1e432a8 Support XA_STRING in notify request
Some programs can only deal with XA_STRING, and it makes impossible st
be able of copying to them. This patch makes st answer also to XA_STRING,
althought it sends utf8 strings. It is not a problem because moderm
applications must support utf8.
2015-03-15 18:07:46 +00:00
Christoph Lohmann
2fcfea1bf1 Add Mod + Shift + c/v and no selclear.
Thanks to Alex Pilon <alp@alexpilon.ca>!

Now there is a distinction between the primary and clipboard selection. With
Mod + Shift + c/v the clipboard is handled. The old Insert behavious does
reside.
2015-03-14 07:41:59 +01:00
Christoph Lohmann
28259f5750 St now does only set PRIMARY on selection.
http://standards.freedesktop.org/clipboards-spec/clipboards-latest.txt
2015-03-10 21:58:32 +01:00
Christoph Lohmann
9494362d0b Fixing the C reading test.
This was a test to see if anyone actually reads what is submitted. The list of
people not contributing will be valuable in the future.
2015-03-10 21:11:04 +01:00
Christoph Lohmann
b0bddc694a Add a hack to handle unknown chars in fontconfig.
The unicode long is added to the cache. So when fontconfig does fall back to
the default font (where there is no easy way to find this out from the
pattern) it isn't reloaded.
2015-03-09 23:16:03 +01:00
Ivan Delalande
1b514048b2 Let curses do the dirty work for flash
Use the terminfo delay syntax ($<x>) in our flash capability to avoid
hardcoding a fixed delay in redraw() when called from tsetmode() with
DECSCNM.
We need to turn on the npc capability so that delays are made with
xon/xoff instead of padding characters.
2015-02-22 11:53:34 +00:00
Nils Reuße
c5f1d74fd8 Update year in usage() 2015-02-15 17:46:15 +01:00
Nils Reuße
7dd24bfb4c Fix crash on font resize resize
if you keep downsizing your fontsize until either xw.ch or xw.cw gets 0,
st crashes, because there is an unchecked division in cresize.
2015-02-15 17:12:36 +01:00
Rian Hunter
aba6c292af Correct shift amount on MODE_INSERT in tputc()
When MODE_INSERT is set we'd shift characters on the same
line forward before inserting our character in tputc().
This did not account for wide characters where width != 1.
This patch makes it so we shift the correct amount.
2015-02-05 20:28:00 +01:00
Rian Hunter
4d14d97547 Fix crash due to wide characters
In tputc(), when a character wasn't large enough to fit
on the current line, we would call tnewline() to place it on
the next line. Unfortunately, we weren't resetting our glyph
pointer and this caused memory corruption when a
wide character (width == 2) was being written. This patch
resets our glyph pointer after calls to tnewline().
2015-02-05 20:28:00 +01:00
Ivan Delalande
708b697ed7 Fix crash due to invalid timespec given to pselect
If blinktimeout is set to a value greater than 1000, pselect will
receive a timeout argument with tv_nsec greater than 1E9 (1 sec), and
fail, making st crash. This patch just ensures that the timespec
structure is correctly filled with a value properly decomposed between
tv_sec and tv_nsec.

Reported by JasonWoof on IRC. Thanks!
2014-12-23 16:20:59 +01:00
Ivan Delalande
09f5d98251 Trim trailing whitespaces in every selection case
Trailing whitespaces are trimmed when copying from normal selection and
rectangular selection on lines that have their last character included
or on the left of the selection. It leads to inconsistent behaviors when
copying the exact same text from the left and right window in
applications with vertical splits.
This patch solves this issue by always trimming the selection.
2014-11-19 18:53:17 +01:00
sin
4418939dd9 Call _exit() instead of exit() if exec*() fails
exit() will also unwind the atexit() functions.  This is bad
because if exec*() fails the process is in an inconsistent state.
2014-11-19 18:52:42 +01:00
Eric Pruitt
bafbba56cd Check for presence of SHELL environment variable
- POSIX states the SHELL environment variable "... shall represent a
  pathname of the user's preferred command language interpreter." As
  such, st should check for its presence when deciding what shell to
  use; just as HOME can be defined to override one's passwd-defined home
  directory, a user should also be able to override their passwd-defined
  shell using the SHELL environment variable.
2014-11-11 19:20:56 +01:00
czarkoff@gmail.com
11625c7166 Replace character with U+FFFD if wcwidth() is -1
Helpful when new Unicode codepoints are not recognized by libc.
2014-11-03 22:52:58 +01:00
Quentin Rameau
008aae541b Avoid failing when embedding with a Window id of 0
I'd like to let st run with its own window when trying to embed it to a window with id 0 instead of exiting with an error.
2014-10-21 18:18:26 +02:00
Roberto E. Vargas Caballero
f9fb620914 Do not set SHELL to utmp ever
SHELL must be set to the SHELL of the user, but it was possible set
it to utmp.
2014-10-15 19:42:20 +02:00
CustaiCo
86633ada91 patch for bell in st
The XBell() call currently used when a bell is recieved sends a message
to the X server, but if the X server doesn't know how to sound it,
it just gets ignored and I have not been able to find anywhere in x.org's
code a way to configure the action that the server does.

However, if you use XkbBell() then you can have a process listening for
the XkbBellNotifyEvent that is produced and either alert you visually or
play an audio file or whatever you want as your notification. You have
to include one more header file but the function seems to be compiled as
part of Xlib, at least on my installation.

CustaiCo
2014-10-13 19:15:52 +02:00
Roberto E. Vargas Caballero
88429cdcbf Add LS2 and LS3
These sequences are the equivalents of LS0 and LS1, but for G2 and
G3.
2014-10-08 11:33:36 +02:00
Roberto E. Vargas Caballero
0c8feecbf7 Fix SI and SO
SI (0x0F or ^O) means Shift In, and it selects G1 charset definition,
and SO (0x0E or ^N) means Shift Out, and it selects G0 charset
definition, but st was doing just the inverse.
2014-10-08 11:28:54 +02:00
Christoph Lohmann
63a07eb19c Minor style changes for the last patch. 2014-09-29 15:40:37 +02:00
Christoph Lohmann
dc8c5c82aa Implementing xzoomreset.
Thanks mvdan@mvdan.cc for proposing this.
2014-09-29 15:38:21 +02:00
Roberto E. Vargas Caballero
c7a945c408 Add missed names of charset sequences 2014-09-23 07:16:58 +02:00
Roberto E. Vargas Caballero
5afb3862ba Add support for utmp in st
St runs an interactive shell and not a login shell, and it means
that profile is not loaded. The default terminal configuration
in some system is not the correct for st, but since profile is
not loaded there is no way of getting a script configures the
correct values.

St doesn't update the utmp files, this is the job of another
suckless tool, utmp. Utmp also opens a login shell (it is the
logical behaviour when you create a new user record) it is a
good option execute utmp and then get a correct input in
utmp, wtmp and lastlog file, and execute the content of the
profile.
2014-09-23 07:12:41 +02:00
Roberto E. Vargas Caballero
0392d165d0 Remove indentation level in xdrawcursor 2014-09-09 05:51:36 +02:00
Ben Hendrickson
98a1085d0e Removing wrapping newlines from selection
When getting selected text, lines that were wrapped because of length
ought not include the wrapping newline in the selection.

This comes up, for example, when copying a bash command that is long
enough to wrap from the console and pasting it back into the console.
The extra newline breaks it.

Similiarly, changes behavior when trimming whitespace from the end of a
physical line to only do so if the line does not wrap. Otherwise we are
trimming whitespace from the middle of a logical line, which may change
its meaning.

Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
2014-08-23 09:52:18 +02:00
Ivan Delalande
51466e019a Change the behavior of word snapping on delimiters
This makes any sequence of identical delimiters be considered a single
word in word-snapping mode. This seems more coherent for this mode and
is similar to what xterm does.

Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
2014-08-21 17:50:31 +02:00
Ivan Delalande
c490a60b80 Move calls to selsnap into selnormalize
This simplifies getbuttoninfo() and bpress(), and fixes a bug which made word
snapping behave incorrectly when a delimiter was at the beginning or end of
line.

Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
2014-08-21 17:50:31 +02:00
Alexander Huemer
83dea7fd7b Improve readability of enum members
The 'left shift from one' notation of power of two integers is more
expressive than the result.

Signed-off-by: Alexander Huemer <alexander.huemer@xx.vu>
Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
2014-08-20 21:52:33 +02:00
Roberto E. Vargas Caballero
e5f6736ee0 Add eschandle()
We already have a csihandle() function, where is located code about
CSI sequences, so it is logical do the same with ESC sequences.
This change helps to simplify tcontrol(), which has a complex flow
and should be rewritten.
2014-08-20 21:52:33 +02:00
Roberto E. Vargas Caballero
a3549c2eec Improve execsh() and don't allow anonymous shells
This patch improves the shell selection on execsh and forbid
shell with users don't registered in the passwd file.
2014-08-20 09:03:44 +02:00
Roberto E. Vargas Caballero
8342036f98 Fix definition of CONTROLC0
DEL character is not thecnically talking a C0 control character,
although it has some common properties with them, so it is useful
for us consider it as C0. Before this patch DEL (\177), was not
ignored as it ought to be.
2014-08-19 12:57:44 +02:00
Quentin Carbonneaux
177d888dff reset the alt screen in treset
Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
2014-08-19 12:57:43 +02:00
Quentin Carbonneaux
fa04911c91 simplify loop in tresize
Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
2014-08-19 12:57:43 +02:00
Roberto E. Vargas Caballero
8f3e6a577d Fix man page and usage()
Man page was repeating -f option, the second time instead of -i,
and this option was lost in usage() message. This patch also indent
the output of usage().
2014-08-17 20:49:33 +02:00
Roberto E. Vargas Caballero
f8b4998b32 Convert VT102ID to a config variable
VT102ID is the sequence that the terminal returns when it is inquired
to identify itself. This value should be configurable in the same
way that another st parameters.
2014-08-15 15:00:48 +02:00
Roberto E. Vargas Caballero
6530025bca Fix portability problem in techo()
ISCONTROL chechks if a value is between 0 and 0x1f or
between 0x80 and 0x9f. Char signess depends of architecture
and compiler, so in some environment the second case is
always false (and wrong), Techo() calls ISCONTROL with a
char variable, whose type cannot be changed because tpuc()
expects a pointer to char, so the solution is to insert a
cast in the call to ISCONTROL.
2014-08-15 14:48:16 +02:00
noname
d4a17316d3 Don't set dirty all lines because tswapcreen do it
Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
2014-08-10 22:22:42 +02:00
noname
20c4f12254 tresize return value is not used
Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
2014-08-10 22:16:21 +02:00
Roberto E. Vargas Caballero
8de8ae3923 Unset mode when clearing regions
tclearregion() was clearing regions using spaces and the current
attributes of the terminal. It was correct with all the modes excepct
underline, because they didn't affect the space character, but in
the case of underline it was a problem. A easy way of seeing this
problem is writing this in the last line of the terminal:

	tput smul ; echo first; tput rmul; echo second; echo third

Fist was underlined, and second and third were not underlined, but
the spaces at the right of second was underlined becuause in the
previous scrool underline mode was set.
2014-08-07 10:11:38 +02:00
Roberto E. Vargas Caballero
ec3268961d Add error message when child exits whit error
Master proccess was not showing any error message when the child
died with an error, and it was very confusing for the user (for
example with incorrect -e command).
2014-08-04 22:07:04 +02:00
Roberto E. Vargas Caballero
769d481807 Remove difference between fast and slow blinking
One blinking mode is good enough, and two is too much. The best aproach
is emulate the fast blinking with the slow blinking, that it is more
used.
It is removed the flag ATTR_FASTBLINK because it has not a different
meaning of ATTR_BLINK, so it is not needed.

Signed-off-by: Roberto E. Vargas Caballero <k0ga@shike2.com>
2014-07-31 19:40:37 +02:00