1
0
Fork 0
mirror of https://github.com/NixOS/nixos-hardware synced 2024-11-01 00:29:40 +01:00
nixos-hardware/inversepath/usbarmory/usbarmory-dts.patch
2017-12-24 17:21:43 +00:00

418 lines
10 KiB
Diff

diff -Nru linux-4.4-orig/arch/arm/boot/dts/imx53-usbarmory-common.dtsi linux-4.4/arch/arm/boot/dts/imx53-usbarmory-common.dtsi
--- linux-4.4-orig/arch/arm/boot/dts/imx53-usbarmory-common.dtsi 1969-12-31 18:00:00.000000000 -0600
+++ linux-4.4/arch/arm/boot/dts/imx53-usbarmory-common.dtsi 2016-02-04 08:31:38.730794858 -0600
@@ -0,0 +1,241 @@
+/*
+ * USB armory MkI device tree include file
+ * https://inversepath.com/usbarmory
+ *
+ * Copyright (C) 2015, Inverse Path
+ * Andrej Rosano <andrej@inversepath.com>
+ *
+ * Licensed under GPLv2
+ */
+
+#include "imx53.dtsi"
+
+/ {
+ model = "Inverse Path USB armory";
+ compatible = "inversepath,imx53-usbarmory", "fsl,imx53";
+};
+
+/ {
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ memory {
+ reg = <0x70000000 0x20000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pin_gpio4_27>;
+
+ user {
+ label = "LED";
+ gpios = <&gpio4 27 0>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ soc {
+ aips@60000000 {
+ sahara: crypto@63ff8000 {
+ compatible = "fsl,imx53-sahara";
+ reg = <0x63ff8000 0x4000>;
+ interrupts = <19 20>;
+ clocks = <&clks IMX5_CLK_SAHARA_IPG_GATE>,
+ <&clks IMX5_CLK_SAHARA_IPG_GATE>;
+ clock-names = "ipg", "ahb";
+ };
+ };
+ };
+};
+
+&cpu0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a8";
+ reg = <0x0>;
+ clocks = <&clks IMX5_CLK_ARM>;
+ clock-latency = <61036>;
+ voltage-tolerance = <5>;
+ operating-points = <
+ /* kHz */
+ 166666 850000
+ 400000 900000
+ 800000 1050000
+ >;
+};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+
+ imx53-usbarmory {
+ led_pin_gpio4_27: led_gpio4_27@0 {
+ fsl,pins = <
+ MX53_PAD_DISP0_DAT6__GPIO4_27 0x80000000
+ >;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5
+ MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5
+ MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5
+ MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5
+ MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5
+ MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5
+ >;
+ };
+
+ pinctrl_i2c1_pmic: i2c1grp_pmic {
+ fsl,pins = <
+ MX53_PAD_EIM_D21__I2C1_SCL 0xc0000000
+ MX53_PAD_EIM_D28__I2C1_SDA 0xc0000000
+ >;
+ };
+
+ /*
+ UART mode pin header configration:
+ pin number: 1 2 3 4 5 6 7
+ function: GND 5V ? ? TX RX ?
+ */
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1e4
+ MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1e4
+ >;
+ };
+
+ /*
+ GPIO mode pin header configuration:
+ 1 2 3 4 5 6 7
+ GND 5V GPIO5[26] GPIO5[27] GPIO5[28] GPIO5[29] GPIO5[30]
+ */
+ pinctrl_gpio5: gpio5grp {
+ fsl,pins = <
+ MX53_PAD_CSI0_DAT8__GPIO5_26 0xc0
+ MX53_PAD_CSI0_DAT9__GPIO5_27 0xc0
+ MX53_PAD_CSI0_DAT10__GPIO5_28 0xc0
+ MX53_PAD_CSI0_DAT11__GPIO5_29 0xc0
+ MX53_PAD_CSI0_DAT12__GPIO5_30 0xc0
+ >;
+ };
+
+ /*
+ SPI mode pin header configuration:
+ 1 2 3 4 5 6 7
+ GND 5V SCLK MOSI MISO /SS0 /SS1
+ */
+ pinctrl_ecspi2: ecspi2grp {
+ fsl,pins = <
+ MX53_PAD_CSI0_DAT8__ECSPI2_SCLK 0x80000000
+ MX53_PAD_CSI0_DAT9__ECSPI2_MOSI 0x80000000
+ MX53_PAD_CSI0_DAT10__ECSPI2_MISO 0x80000000
+ MX53_PAD_CSI0_DAT11__GPIO5_29 0x80000000
+ MX53_PAD_CSI0_DAT12__GPIO5_30 0x80000000
+ >;
+ };
+
+ /*
+ I2C mode pin header configuration:
+ 1 2 3 4 5 6 7
+ GND 5V SDA SCL GPIO5[28] GPIO5[29] GPIO5[30]
+ */
+ pinctrl_i2c1_pinheader: i2c1grp_pinheader {
+ fsl,pins = <
+ MX53_PAD_CSI0_DAT8__I2C1_SDA 0xc0000000
+ MX53_PAD_CSI0_DAT9__I2C1_SCL 0xc0000000
+ MX53_PAD_CSI0_DAT10__GPIO5_28 0x80000000
+ MX53_PAD_CSI0_DAT11__GPIO5_29 0x80000000
+ MX53_PAD_CSI0_DAT12__GPIO5_30 0x80000000
+ >;
+ };
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&vpu {
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-0 = <&pinctrl_i2c1_pmic>;
+ status = "okay";
+ ltc3589: pmic@34 {
+ compatible = "lltc,ltc3589-2";
+ reg = <0x34>;
+ regulators {
+ sw1_reg: sw1 {
+ regulator-min-microvolt = <591930>;
+ regulator-max-microvolt = <1224671>;
+ lltc,fb-voltage-divider = <100000 158000>;
+ regulator-ramp-delay = <7000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <704123>;
+ regulator-max-microvolt = <1456803>;
+ lltc,fb-voltage-divider = <180000 191000>;
+ regulator-ramp-delay = <7000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3_reg: sw3 {
+ regulator-min-microvolt = <1341250>;
+ regulator-max-microvolt = <2775000>;
+ lltc,fb-voltage-divider = <270000 100000>;
+ regulator-ramp-delay = <7000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ bb_out_reg: bb-out {
+ regulator-min-microvolt = <3387341>;
+ regulator-max-microvolt = <3387341>;
+ lltc,fb-voltage-divider = <511000 158000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ ldo1_reg: ldo1 {
+ regulator-min-microvolt = <1306329>;
+ regulator-max-microvolt = <1306329>;
+ lltc,fb-voltage-divider = <100000 158000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2_reg: ldo2 {
+ regulator-min-microvolt = <704123>;
+ regulator-max-microvolt = <1456806>;
+ lltc,fb-voltage-divider = <180000 191000>;
+ regulator-ramp-delay = <7000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo3_reg: ldo3 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-boot-on;
+ };
+
+ ldo4_reg: ldo4 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3200000>;
+ };
+ };
+ };
+};
diff -Nru linux-4.4-orig/arch/arm/boot/dts/imx53-usbarmory.dts linux-4.4/arch/arm/boot/dts/imx53-usbarmory.dts
--- linux-4.4-orig/arch/arm/boot/dts/imx53-usbarmory.dts 1969-12-31 18:00:00.000000000 -0600
+++ linux-4.4/arch/arm/boot/dts/imx53-usbarmory.dts 2016-02-04 08:31:38.730794858 -0600
@@ -0,0 +1,18 @@
+/*
+ * USB armory MkI device mode device tree file
+ * https://inversepath.com/usbarmory
+ *
+ * Copyright (C) 2015, Inverse Path
+ * Andrej Rosano <andrej@inversepath.com>
+ *
+ * Licensed under GPLv2
+ */
+
+/dts-v1/;
+
+#include "imx53-usbarmory-common.dtsi"
+
+&usbotg {
+ dr_mode = "peripheral";
+ status = "okay";
+};
diff -Nru linux-4.4-orig/arch/arm/boot/dts/imx53-usbarmory-gpio.dts linux-4.4/arch/arm/boot/dts/imx53-usbarmory-gpio.dts
--- linux-4.4-orig/arch/arm/boot/dts/imx53-usbarmory-gpio.dts 1969-12-31 18:00:00.000000000 -0600
+++ linux-4.4/arch/arm/boot/dts/imx53-usbarmory-gpio.dts 2016-02-04 08:31:38.730794858 -0600
@@ -0,0 +1,26 @@
+/*
+ * USB armory MkI device mode device tree file
+ * https://inversepath.com/usbarmory
+ *
+ * Copyright (C) 2015, Inverse Path
+ * Andrej Rosano <andrej@inversepath.com>
+ *
+ * Licensed under GPLv2
+ */
+
+/dts-v1/;
+
+#include "imx53-usbarmory-common.dtsi"
+
+&usbotg {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-0 = <&pinctrl_gpio5>;
+};
+
+&uart1 {
+ status = "disabled";
+};
diff -Nru linux-4.4-orig/arch/arm/boot/dts/imx53-usbarmory-host.dts linux-4.4/arch/arm/boot/dts/imx53-usbarmory-host.dts
--- linux-4.4-orig/arch/arm/boot/dts/imx53-usbarmory-host.dts 1969-12-31 18:00:00.000000000 -0600
+++ linux-4.4/arch/arm/boot/dts/imx53-usbarmory-host.dts 2016-02-04 08:31:38.730794858 -0600
@@ -0,0 +1,18 @@
+/*
+ * USB armory MkI host mode device tree file
+ * https://inversepath.com/usbarmory
+ *
+ * Copyright (C) 2015, Inverse Path
+ * Andrej Rosano <andrej@inversepath.com>
+ *
+ * Licensed under GPLv2
+ */
+
+/dts-v1/;
+
+#include "imx53-usbarmory-common.dtsi"
+
+&usbotg {
+ dr_mode = "host";
+ status = "okay";
+};
diff -Nru linux-4.4-orig/arch/arm/boot/dts/imx53-usbarmory-i2c.dts linux-4.4/arch/arm/boot/dts/imx53-usbarmory-i2c.dts
--- linux-4.4-orig/arch/arm/boot/dts/imx53-usbarmory-i2c.dts 1969-12-31 18:00:00.000000000 -0600
+++ linux-4.4/arch/arm/boot/dts/imx53-usbarmory-i2c.dts 2016-02-04 08:31:38.730794858 -0600
@@ -0,0 +1,32 @@
+/*
+ * USB armory MkI device mode device tree file
+ * https://inversepath.com/usbarmory
+ *
+ * Copyright (C) 2015, Inverse Path
+ * Andrej Rosano <andrej@inversepath.com>
+ *
+ * Licensed under GPLv2
+ */
+
+/dts-v1/;
+
+#include "imx53-usbarmory-common.dtsi"
+
+&usbotg {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&uart1 {
+ status = "disabled";
+};
+
+&iomuxc {
+ pinctrl-0 = <&pinctrl_i2c1_pinheader>;
+};
+
+&i2c1 {
+ ltc3589: pmic@34 {
+ status = "disabled";
+ };
+};
diff -Nru linux-4.4-orig/arch/arm/boot/dts/imx53-usbarmory-spi.dts linux-4.4/arch/arm/boot/dts/imx53-usbarmory-spi.dts
--- linux-4.4-orig/arch/arm/boot/dts/imx53-usbarmory-spi.dts 1969-12-31 18:00:00.000000000 -0600
+++ linux-4.4/arch/arm/boot/dts/imx53-usbarmory-spi.dts 2016-02-04 08:31:38.730794858 -0600
@@ -0,0 +1,45 @@
+/*
+ * USB armory MkI device mode device tree file
+ * https://inversepath.com/usbarmory
+ *
+ * Copyright (C) 2015, Inverse Path
+ * Andrej Rosano <andrej@inversepath.com>
+ *
+ * Licensed under GPLv2
+ */
+
+/dts-v1/;
+
+#include "imx53-usbarmory-common.dtsi"
+
+&usbotg {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&uart1 {
+ status = "disabled";
+};
+
+&iomuxc {
+ pinctrl-0 = <&pinctrl_ecspi2>;
+};
+
+&ecspi2 {
+ fsl,spi-num-chipselects = <2>;
+ cs-gpios = <&gpio5 29 0>, <&gpio5 30 0>;
+ status = "okay";
+
+ flash: m25p40@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p40", "st,m25p";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+
+ partition@0 {
+ label = "test-partition";
+ reg = <0x0 0x80000>;
+ };
+ };
+};
diff -Nru linux-4.4-orig/arch/arm/boot/dts/Makefile linux-4.4/arch/arm/boot/dts/Makefile
--- linux-4.4-orig/arch/arm/boot/dts/Makefile 2016-02-04 13:29:20.880919101 -0600
+++ linux-4.4/arch/arm/boot/dts/Makefile 2016-02-04 13:27:10.733849955 -0600
@@ -278,6 +278,10 @@
imx53-smd.dtb \
imx53-tx53-x03x.dtb \
imx53-tx53-x13x.dtb \
+ imx53-usbarmory.dtb \
+ imx53-usbarmory-host.dtb \
+ imx53-usbarmory-i2c.dtb \
+ imx53-usbarmory-gpio.dtb \
imx53-voipac-bsb.dtb
dtb-$(CONFIG_SOC_IMX6Q) += \
imx6dl-apf6dev.dtb \