nixos-hardware/dell/xps/15-9550/README.wiki

= Dell XPS 15 9550 =

Most of this I presume also applies to the XPS 13 1530, the 13" variant.

== Tested Hardware ==

* CPU: Intel(R) Core(TM) i7-6700HQ CPU @ 2.60GHz
* RAM: 32 GB
* HDD: 512 GiB SSD
* Screen: 15" 4k (3840✕2160)
* Graphics: NVIDIA Corporation GM107M, with Intel Graphics too.
* Input: Touchscreen and trackpad.

== NVIDIA Offload ==

In order to run a program on the NVIDIA gpu, you can use the `nvidia-offload` function, for example:
```
nvidia-offload `nix-shell -p glxinfo --run 'glxgears'`
```
This is a short bash script that sets the proper environment variables and calls your command.

== Firmware Configuration ==

Not much tweaking of NixOS itself was needed. But we currently cannot automate the firmware setup, so this must be done by hand.

=== Before installation ===

These settings are needed both for booting the final install, and installer itself. Therefore, they must be done first.

* ''Disable Secure Boot (but keep UEFI Boot).'' Thakfully doing so is as easy as changing any other simple setting.

* ''Disable Intel hardware RAID and use AHCI instead.'' Intel doesn't seem to provide a working linux driver for this.  (If you just have SSD it's pointless and just slows things down needlessly anyways.)


=== After installation ===

* ''Add systemd-boot to UEFI boot list.'' The (uneditable anyways) settings mapping drive UUIDs to HD* work fine.

=== Optional ===

* ''Disable C-States.'' This is a processor idling thing. It seems to cause random crashes (Blank screen, no normal panic debug dump). Unfortunately, without it, the computer cannot be suspended. On the other hand, it doesn't seem to affect acpi's estimation of battery life when the computer is running with minimal load, but I haven't tested battery life in practice. I list it as optional as there's a tradeoff, and the crashes are rare enough one can probably get through installation just fine.

* ''Update BIOS.'' According to Reddit, this helps with battery life.

* ''Update Intel's Thunderbolt firmware.'' Without this, the Thunderbolt port will only work as power source, and not transfer data.

=== Troubleshooting ===

==== rcu_sched freezing problems ====

After a recent update my machine became unstable. X couldn't start and even running `lspci` would lock the machine. I'm not sure what the root cause was, but I found the fix here: https://wiki.archlinux.org/index.php/Dell_XPS_15_9560#Troubleshooting

TL;DR I added this line:

```
boot.kernelParams = [ "acpi_rev_override=1" "pcie_aspm=off" "nouveau.modeset=0" ];
```

Some more detail about the problem can be found here: https://bbs.archlinux.org/viewtopic.php?id=223056
Dell XPS 15 9550 2016-03-05 20:04:24 +01:00			`= Dell XPS 15 9550 =`

			`Most of this I presume also applies to the XPS 13 1530, the 13" variant.`

			`== Tested Hardware ==`

			`* CPU: Intel(R) Core(TM) i7-6700HQ CPU @ 2.60GHz`
Copy NVidia 9500 NVidia settings for 9550 2020-12-29 01:39:35 +01:00			`* RAM: 32 GB`
Dell XPS 15 9550 2016-03-05 20:04:24 +01:00			`* HDD: 512 GiB SSD`
			`* Screen: 15" 4k (3840✕2160)`
			`* Graphics: NVIDIA Corporation GM107M, with Intel Graphics too.`
			`* Input: Touchscreen and trackpad.`

Copy NVidia 9500 NVidia settings for 9550 2020-12-29 01:39:35 +01:00			`== NVIDIA Offload ==`

			In order to run a program on the NVIDIA gpu, you can use the `nvidia-offload` function, for example:
			```
			nvidia-offload `nix-shell -p glxinfo --run 'glxgears'`
			```
			`This is a short bash script that sets the proper environment variables and calls your command.`
Dell XPS 15 9550 2016-03-05 20:04:24 +01:00
			`== Firmware Configuration ==`

			`Not much tweaking of NixOS itself was needed. But we currently cannot automate the firmware setup, so this must be done by hand.`

			`=== Before installation ===`

			`These settings are needed both for booting the final install, and installer itself. Therefore, they must be done first.`

			`* ''Disable Secure Boot (but keep UEFI Boot).'' Thakfully doing so is as easy as changing any other simple setting.`

			`* ''Disable Intel hardware RAID and use AHCI instead.'' Intel doesn't seem to provide a working linux driver for this. (If you just have SSD it's pointless and just slows things down needlessly anyways.)`


			`=== After installation ===`

s/gummiboot/systemd-boot -- fixes warnings on unstable 2016-06-04 01:07:56 +02:00			`* ''Add systemd-boot to UEFI boot list.'' The (uneditable anyways) settings mapping drive UUIDs to HD* work fine.`
Dell XPS 15 9550 2016-03-05 20:04:24 +01:00
			`=== Optional ===`

			`* ''Disable C-States.'' This is a processor idling thing. It seems to cause random crashes (Blank screen, no normal panic debug dump). Unfortunately, without it, the computer cannot be suspended. On the other hand, it doesn't seem to affect acpi's estimation of battery life when the computer is running with minimal load, but I haven't tested battery life in practice. I list it as optional as there's a tradeoff, and the crashes are rare enough one can probably get through installation just fine.`

			`* ''Update BIOS.'' According to Reddit, this helps with battery life.`

			`* ''Update Intel's Thunderbolt firmware.'' Without this, the Thunderbolt port will only work as power source, and not transfer data.`
Add a note about rcu_sched problems How I fixed my XPS15 after it being dead for two months 2018-07-13 10:47:48 +02:00
			`=== Troubleshooting ===`

			`==== rcu_sched freezing problems ====`

			After a recent update my machine became unstable. X couldn't start and even running `lspci` would lock the machine. I'm not sure what the root cause was, but I found the fix here: https://wiki.archlinux.org/index.php/Dell_XPS_15_9560#Troubleshooting

			`TL;DR I added this line:`

			```
			`boot.kernelParams = [ "acpi_rev_override=1" "pcie_aspm=off" "nouveau.modeset=0" ];`
			```

Add a link to the other forum thread I found 2018-07-13 10:49:39 +02:00			`Some more detail about the problem can be found here: https://bbs.archlinux.org/viewtopic.php?id=223056`