eeva/jamulus
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity
jamulus/src/protocol.cpp
Volker Fischer 0c59a805fe small merge fix
2020-04-12 16:03:38 +02:00

2347 lines
73 KiB
C++
Executable file
Raw Blame History

/******************************************************************************\
* Copyright (c) 2004-2020
*
* Author(s):
* Volker Fischer
*
Protocol message definition
---------------------------
- All messages received need to be acknowledged by an acknowledge packet (except
of connection less messages)
MAIN FRAME
----------
+-------------+------------+------------+------------------+ ...
| 2 bytes TAG | 2 bytes ID | 1 byte cnt | 2 bytes length n | ...
+-------------+------------+------------+------------------+ ...
... --------------+-------------+
... n bytes data | 2 bytes CRC |
... --------------+-------------+
- TAG is an all zero bit word to identify protocol messages
- message ID defined by the defines PROTMESSID_x
- cnt: counter which is increment for each message and wraps around at 255
- length n in bytes of the data
- actual data, dependent on message type
- 16 bits CRC, calculated over the entire message and is transmitted inverted
Generator polynom: G_16(x) = x^16 + x^12 + x^5 + 1, initial state: all ones
MESSAGES (with connection)
--------------------------
- PROTMESSID_ACKN: Acknowledgement message
+------------------------------------------+
| 2 bytes ID of message to be acknowledged |
+------------------------------------------+
note: the cnt value is the same as of the message to be acknowledged
- PROTMESSID_JITT_BUF_SIZE: Jitter buffer size
+--------------------------+
| 2 bytes number of blocks |
+--------------------------+
- PROTMESSID_REQ_JITT_BUF_SIZE: Request jitter buffer size
note: does not have any data -> n = 0
- PROTMESSID_CHANNEL_GAIN: Gain of channel
+-------------------+--------------+
| 1 byte channel ID | 2 bytes gain |
+-------------------+--------------+
- PROTMESSID_CONN_CLIENTS_LIST: Information about connected clients
for each connected client append following data:
+-------------------+-----------------+--------------------+ ...
| 1 byte channel ID | 2 bytes country | 4 bytes instrument | ...
+-------------------+-----------------+--------------------+ ...
... --------------------+--------------------+ ...
... 1 byte skill level | 4 bytes IP address | ...
... --------------------+--------------------+ ...
... ------------------+---------------------------+
... 2 bytes number n | n bytes UTF-8 string name |
... ------------------+---------------------------+
... ------------------+---------------------------+
... 2 bytes number n | n bytes UTF-8 string city |
... ------------------+---------------------------+
- PROTMESSID_REQ_CONN_CLIENTS_LIST: Request connected clients list
note: does not have any data -> n = 0
- PROTMESSID_CHANNEL_INFOS: Information about the channel
+-----------------+--------------------+ ...
| 2 bytes country | 4 bytes instrument | ...
+-----------------+--------------------+ ...
... --------------------+ ...
... 1 byte skill level | ...
... --------------------+ ...
... ------------------+---------------------------+ ...
... 2 bytes number n | n bytes UTF-8 string name | ...
... ------------------+---------------------------+ ...
... ------------------+---------------------------+
... 2 bytes number n | n bytes UTF-8 string city |
... ------------------+---------------------------+
- PROTMESSID_REQ_CHANNEL_INFOS: Request infos of the channel
note: does not have any data -> n = 0
- PROTMESSID_CHAT_TEXT: Chat text
+------------------+----------------------+
| 2 bytes number n | n bytes UTF-8 string |
+------------------+----------------------+
- PROTMESSID_NETW_TRANSPORT_PROPS: Properties for network transport
+------------------------+-------------------------+-----------------+ ...
| 4 bytes base netw size | 2 bytes block size fact | 1 byte num chan | ...
+------------------------+-------------------------+-----------------+ ...
... ------------------+-----------------------+ ...
... 4 bytes sam rate | 2 bytes audiocod type | ...
... ------------------+-----------------------+ ...
... -----------------+----------------------+
... 2 bytes version | 4 bytes audiocod arg |
... -----------------+----------------------+
- "base netw size": length of the base network packet (frame) in bytes
- "block size fact": block size factor
- "num chan": number of channels of the audio signal, e.g. "2" is
stereo
- "sam rate": sample rate of the audio stream
- "audiocod type": audio coding type, the following types are supported:
- 0: none, no audio coding applied
- 1: CELT
- 2: OPUS
- "version": version of the audio coder, if not used this value
shall be set to 0
- "audiocod arg": argument for the audio coder, if not used this value
shall be set to 0
- PROTMESSID_REQ_NETW_TRANSPORT_PROPS: Request properties for network transport
note: does not have any data -> n = 0
- PROTMESSID_LICENCE_REQUIRED: Licence required to connect to the server
+---------------------+
| 1 byte licence type |
+---------------------+
- PROTMESSID_CLM_REQ_CHANNEL_LEVEL_LIST: Opt in or out of the channel level list
+---------------+
| 1 byte option |
+---------------+
option is boolean, true to opt in, false to opt out
// #### COMPATIBILITY OLD VERSION, TO BE REMOVED ####
- PROTMESSID_OPUS_SUPPORTED: Informs that OPUS codec is supported
note: does not have any data -> n = 0
CONNECTION LESS MESSAGES
------------------------
- PROTMESSID_CLM_PING_MS: Connection less ping message (for measuring the ping
time)
+-----------------------------+
| 4 bytes transmit time in ms |
+-----------------------------+
- PROTMESSID_CLM_PING_MS_WITHNUMCLIENTS: Connection less ping message (for
measuring the ping time) with the
info about the current number of
connected clients
+-----------------------------+---------------------------------+
| 4 bytes transmit time in ms | 1 byte number connected clients |
+-----------------------------+---------------------------------+
- PROTMESSID_CLM_SERVER_FULL: Connection less server full message
note: does not have any data -> n = 0
- PROTMESSID_CLM_REGISTER_SERVER: Register a server, providing server
information
+------------------------------+ ...
| 2 bytes server internal port | ...
+------------------------------+ ...
... -----------------+----------------------------------+ ...
... 2 bytes country | 1 byte maximum connected clients | ...
... -----------------+----------------------------------+ ...
... ---------------------+ ...
... 1 byte is permanent | ...
... ---------------------+ ...
... ------------------+----------------------------------+ ...
... 2 bytes number n | n bytes UTF-8 string server name | ...
... ------------------+----------------------------------+ ...
... ------------------+---------------------------------------------+ ...
... 2 bytes number n | n bytes UTF-8 string server interal address | ...
... ------------------+---------------------------------------------+ ...
... ------------------+---------------------------+
... 2 bytes number n | n bytes UTF-8 string city |
... ------------------+---------------------------+
- "country" is according to "Common Locale Data Repository" which is used in
the QLocale class
- "maximum connected clients" is the maximum number of clients which can
be connected to the server at the same time
- "is permanent" is a flag which indicates if the server is permanent
online or not. If this value is any value <> 0 indicates that the server
is permanent online.
- "server interal address" represents the IPv4 address as a dotted quad to
be used by clients with the same external IP address as the server.
NOTE: In the PROTMESSID_CLM_SERVER_LIST list, this field will be empty
as only the initial IP address should be used by the client. Where
necessary, that value will contain the server internal address.
- PROTMESSID_CLM_UNREGISTER_SERVER: Unregister a server
note: does not have any data -> n = 0
- PROTMESSID_CLM_SERVER_LIST: Server list message
for each registered server append following data:
+--------------------+--------------------------------+
| 4 bytes IP address | PROTMESSID_CLM_REGISTER_SERVER |
+--------------------+--------------------------------+
- "PROTMESSID_CLM_REGISTER_SERVER" means that exactly the same message body
of the PROTMESSID_CLM_REGISTER_SERVER message is used
- PROTMESSID_CLM_REQ_SERVER_LIST: Request server list
note: does not have any data -> n = 0
- PROTMESSID_CLM_SEND_EMPTY_MESSAGE: Send "empty message" message
+--------------------+--------------+
| 4 bytes IP address | 2 bytes port |
+--------------------+--------------+
- PROTMESSID_CLM_DISCONNECTION: Disconnect message
note: does not have any data -> n = 0
- PROTMESSID_CLM_VERSION_AND_OS: Version number and operating system
+-------------------------+------------------+------------------------------+
| 1 byte operating system | 2 bytes number n | n bytes UTF-8 string version |
+-------------------------+------------------+------------------------------+
- PROTMESSID_CLM_REQ_VERSION_AND_OS: Request version number and operating system
note: does not have any data -> n = 0
- PROTMESSID_CLM_CONN_CLIENTS_LIST: Information about connected clients
for each connected client append the PROTMESSID_CONN_CLIENTS_LIST:
+------------------------------+------------------------------+ ...
| PROTMESSID_CONN_CLIENTS_LIST | PROTMESSID_CONN_CLIENTS_LIST | ...
+------------------------------+------------------------------+ ...
- PROTMESSID_CLM_REQ_CONN_CLIENTS_LIST: Request the connected clients list
note: does not have any data -> n = 0
- PROTMESSID_CLM_CHANNEL_LEVEL_LIST: The channel level list
+----------------------------------+
| ( ( n + 1 ) / 2 ) * 4 bit values |
+----------------------------------+
n is number of connected clients
the values are the maximum channel levels for a client frame converted
to the range of CMultiColorLEDBar in 4 bits, two entries per byte
with the earlier channel in the lower half of the byte
where an odd number of clients is connected, there will be four unused
upper bits in the final byte, containing 0xF (which is out of range)
the server may compute them message when any client has used
PROTMESSID_CLM_REQ_CHANNEL_LEVEL_LIST to opt in
the server may issue to message only to a client that has used
PROTMESSID_CLM_REQ_CHANNEL_LEVEL_LIST to opt in
******************************************************************************
*
* This program is free software; you can redistribute it and/or modify it under
* the terms of the GNU General Public License as published by the Free Software
* Foundation; either version 2 of the License, or (at your option) any later
* version.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
* FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
\******************************************************************************/
#include "protocol.h"
/* Implementation *************************************************************/
CProtocol::CProtocol()
{
Reset();
// Connections -------------------------------------------------------------
QObject::connect ( &TimerSendMess, SIGNAL ( timeout() ),
this, SLOT ( OnTimerSendMess() ) );
}
void CProtocol::Reset()
{
QMutexLocker locker ( &Mutex );
// prepare internal variables for initial protocol transfer
iCounter = 0;
iOldRecID = PROTMESSID_ILLEGAL;
iOldRecCnt = 0;
// delete complete "send message queue"
SendMessQueue.clear();
}
void CProtocol::EnqueueMessage ( CVector<uint8_t>& vecMessage,
const int iCnt,
const int iID )
{
bool bListWasEmpty;
Mutex.lock();
{
// check if list is empty so that we have to initiate a send process
bListWasEmpty = SendMessQueue.empty();
// create send message object for the queue
CSendMessage SendMessageObj ( vecMessage, iCnt, iID );
// we want to have a FIFO: we add at the end and take from the beginning
SendMessQueue.push_back ( SendMessageObj );
}
Mutex.unlock();
// if list was empty, initiate send process
if ( bListWasEmpty )
{
SendMessage();
}
}
void CProtocol::SendMessage()
{
CVector<uint8_t> vecMessage;
bool bSendMess = false;
Mutex.lock();
{
// we have to check that list is not empty, since in another thread the
// last element of the list might have been erased
if ( !SendMessQueue.empty() )
{
vecMessage.Init ( SendMessQueue.front().vecMessage.Size() );
vecMessage = SendMessQueue.front().vecMessage;
bSendMess = true;
}
}
Mutex.unlock();
if ( bSendMess )
{
// send message
emit MessReadyForSending ( vecMessage );
// start time-out timer if not active
if ( !TimerSendMess.isActive() )
{
TimerSendMess.start ( SEND_MESS_TIMEOUT_MS );
}
}
else
{
// no message to send, stop timer
TimerSendMess.stop();
}
}
void CProtocol::CreateAndSendMessage ( const int iID,
const CVector<uint8_t>& vecData )
{
CVector<uint8_t> vecNewMessage;
int iCurCounter;
Mutex.lock();
{
// store current counter value
iCurCounter = iCounter;
// increase counter (wraps around automatically)
iCounter++;
}
Mutex.unlock();
// build complete message
GenMessageFrame ( vecNewMessage, iCurCounter, iID, vecData );
// enqueue message
EnqueueMessage ( vecNewMessage, iCurCounter, iID );
}
void CProtocol::CreateAndImmSendAcknMess ( const int& iID,
const int& iCnt )
{
CVector<uint8_t> vecAcknMessage;
CVector<uint8_t> vecData ( 2 ); // 2 bytes of data
int iPos = 0; // init position pointer
// build data vector
PutValOnStream ( vecData, iPos, static_cast<uint32_t> ( iID ), 2 );
// build complete message
GenMessageFrame ( vecAcknMessage, iCnt, PROTMESSID_ACKN, vecData );
// immediately send acknowledge message
emit MessReadyForSending ( vecAcknMessage );
}
void CProtocol::CreateAndImmSendConLessMessage ( const int iID,
const CVector<uint8_t>& vecData,
const CHostAddress& InetAddr )
{
CVector<uint8_t> vecNewMessage;
// build complete message (counter per definition=0 for connection less
// messages)
GenMessageFrame ( vecNewMessage, 0, iID, vecData );
// immediately send message
emit CLMessReadyForSending ( InetAddr, vecNewMessage );
}
bool CProtocol::ParseMessageBody ( const CVector<uint8_t>& vecbyMesBodyData,
const int iRecCounter,
const int iRecID )
{
/*
return code: false -> ok; true -> error
*/
bool bRet = false;
bool bSendNextMess;
/*
// TEST channel implementation: randomly delete protocol messages (50 % loss)
if ( rand() < ( RAND_MAX / 2 ) ) return false;
*/
// In case we received a message and returned an answer but our answer
// did not make it to the receiver, he will resend his message. We check
// here if the message is the same as the old one, and if this is the
// case, just resend our old answer again
if ( ( iOldRecID == iRecID ) && ( iOldRecCnt == iRecCounter ) )
{
// acknowledgments are not acknowledged
if ( iRecID != PROTMESSID_ACKN )
{
// resend acknowledgement
CreateAndImmSendAcknMess ( iRecID, iRecCounter );
}
}
else
{
// special treatment for acknowledge messages
if ( iRecID == PROTMESSID_ACKN )
{
// extract data from stream and emit signal for received value
int iPos = 0;
const int iData =
static_cast<int> ( GetValFromStream ( vecbyMesBodyData, iPos, 2 ) );
Mutex.lock();
{
// check if this is the correct acknowledgment
bSendNextMess = false;
if ( !SendMessQueue.empty() )
{
if ( ( SendMessQueue.front().iCnt == iRecCounter ) &&
( SendMessQueue.front().iID == iData ) )
{
// message acknowledged, remove from queue
SendMessQueue.pop_front();
// send next message in queue
bSendNextMess = true;
}
}
}
Mutex.unlock();
if ( bSendNextMess )
{
SendMessage();
}
}
else
{
// check which type of message we received and do action
switch ( iRecID )
{
case PROTMESSID_JITT_BUF_SIZE:
bRet = EvaluateJitBufMes ( vecbyMesBodyData );
break;
case PROTMESSID_REQ_JITT_BUF_SIZE:
bRet = EvaluateReqJitBufMes();
break;
case PROTMESSID_CHANNEL_GAIN:
bRet = EvaluateChanGainMes ( vecbyMesBodyData );
break;
case PROTMESSID_CONN_CLIENTS_LIST:
bRet = EvaluateConClientListMes ( vecbyMesBodyData );
break;
case PROTMESSID_REQ_CONN_CLIENTS_LIST:
bRet = EvaluateReqConnClientsList();
break;
case PROTMESSID_CHANNEL_INFOS:
bRet = EvaluateChanInfoMes ( vecbyMesBodyData );
break;
case PROTMESSID_REQ_CHANNEL_INFOS:
bRet = EvaluateReqChanInfoMes();
break;
case PROTMESSID_CHAT_TEXT:
bRet = EvaluateChatTextMes ( vecbyMesBodyData );
break;
case PROTMESSID_NETW_TRANSPORT_PROPS:
bRet = EvaluateNetwTranspPropsMes ( vecbyMesBodyData );
break;
case PROTMESSID_REQ_NETW_TRANSPORT_PROPS:
bRet = EvaluateReqNetwTranspPropsMes();
break;
case PROTMESSID_LICENCE_REQUIRED:
bRet = EvaluateLicenceRequiredMes ( vecbyMesBodyData );
break;
case PROTMESSID_REQ_CHANNEL_LEVEL_LIST:
bRet = EvaluateReqChannelLevelListMes ( vecbyMesBodyData );
break;
}
// immediately send acknowledge message
CreateAndImmSendAcknMess ( iRecID, iRecCounter );
// save current message ID and counter to find out if message
// was resent
iOldRecID = iRecID;
iOldRecCnt = iRecCounter;
}
}
return bRet;
}
bool CProtocol::ParseConnectionLessMessageBody ( const CVector<uint8_t>& vecbyMesBodyData,
const int iRecID,
const CHostAddress& InetAddr )
{
/*
return code: false -> ok; true -> error
*/
bool bRet = false;
/*
// TEST channel implementation: randomly delete protocol messages (50 % loss)
if ( rand() < ( RAND_MAX / 2 ) ) return false;
*/
if ( IsConnectionLessMessageID ( iRecID ) )
{
// check which type of message we received and do action
switch ( iRecID )
{
case PROTMESSID_CLM_PING_MS:
bRet = EvaluateCLPingMes ( InetAddr, vecbyMesBodyData );
break;
case PROTMESSID_CLM_PING_MS_WITHNUMCLIENTS:
bRet = EvaluateCLPingWithNumClientsMes ( InetAddr, vecbyMesBodyData );
break;
case PROTMESSID_CLM_SERVER_FULL:
bRet = EvaluateCLServerFullMes();
break;
case PROTMESSID_CLM_SERVER_LIST:
bRet = EvaluateCLServerListMes ( InetAddr, vecbyMesBodyData );
break;
case PROTMESSID_CLM_REQ_SERVER_LIST:
bRet = EvaluateCLReqServerListMes ( InetAddr );
break;
case PROTMESSID_CLM_SEND_EMPTY_MESSAGE:
bRet = EvaluateCLSendEmptyMesMes ( vecbyMesBodyData );
break;
case PROTMESSID_CLM_REGISTER_SERVER:
bRet = EvaluateCLRegisterServerMes ( InetAddr, vecbyMesBodyData );
break;
case PROTMESSID_CLM_UNREGISTER_SERVER:
bRet = EvaluateCLUnregisterServerMes ( InetAddr );
break;
case PROTMESSID_CLM_DISCONNECTION:
bRet = EvaluateCLDisconnectionMes ( InetAddr );
break;
case PROTMESSID_CLM_VERSION_AND_OS:
bRet = EvaluateCLVersionAndOSMes ( InetAddr, vecbyMesBodyData );
break;
case PROTMESSID_CLM_REQ_VERSION_AND_OS:
bRet = EvaluateCLReqVersionAndOSMes ( InetAddr );
break;
case PROTMESSID_CLM_CONN_CLIENTS_LIST:
bRet = EvaluateCLConnClientsListMes ( InetAddr, vecbyMesBodyData );
break;
case PROTMESSID_CLM_REQ_CONN_CLIENTS_LIST:
bRet = EvaluateCLReqConnClientsListMes ( InetAddr );
break;
case PROTMESSID_CLM_CHANNEL_LEVEL_LIST:
bRet = EvaluateCLChannelLevelListMes ( InetAddr, vecbyMesBodyData );
break;
}
}
else
{
bRet = true; // return error code
}
return bRet;
}
/******************************************************************************\
* Access functions for creating and parsing messages *
\******************************************************************************/
void CProtocol::CreateJitBufMes ( const int iJitBufSize )
{
CVector<uint8_t> vecData ( 2 ); // 2 bytes of data
int iPos = 0; // init position pointer
// build data vector
PutValOnStream ( vecData, iPos, static_cast<uint32_t> ( iJitBufSize ), 2 );
CreateAndSendMessage ( PROTMESSID_JITT_BUF_SIZE, vecData );
}
bool CProtocol::EvaluateJitBufMes ( const CVector<uint8_t>& vecData )
{
int iPos = 0; // init position pointer
// check size
if ( vecData.Size() != 2 )
{
return true; // return error code
}
// extract jitter buffer size
const int iData =
static_cast<int> ( GetValFromStream ( vecData, iPos, 2 ) );
if ( ( ( iData < MIN_NET_BUF_SIZE_NUM_BL ) ||
( iData > MAX_NET_BUF_SIZE_NUM_BL ) ) &&
( iData != AUTO_NET_BUF_SIZE_FOR_PROTOCOL ) )
{
return true; // return error code
}
// invoke message action
emit ChangeJittBufSize ( iData );
return false; // no error
}
void CProtocol::CreateReqJitBufMes()
{
CreateAndSendMessage ( PROTMESSID_REQ_JITT_BUF_SIZE,
CVector<uint8_t> ( 0 ) );
}
bool CProtocol::EvaluateReqJitBufMes()
{
// invoke message action
emit ReqJittBufSize();
return false; // no error
}
void CProtocol::CreateChanGainMes ( const int iChanID, const double dGain )
{
CVector<uint8_t> vecData ( 3 ); // 3 bytes of data
int iPos = 0; // init position pointer
// build data vector
// channel ID
PutValOnStream ( vecData, iPos, static_cast<uint32_t> ( iChanID ), 1 );
// actual gain, we convert from double with range 0..1 to integer
const int iCurGain = static_cast<int> ( dGain * ( 1 << 15 ) );
PutValOnStream ( vecData, iPos, static_cast<uint32_t> ( iCurGain ), 2 );
CreateAndSendMessage ( PROTMESSID_CHANNEL_GAIN, vecData );
}
bool CProtocol::EvaluateChanGainMes ( const CVector<uint8_t>& vecData )
{
int iPos = 0; // init position pointer
// check size
if ( vecData.Size() != 3 )
{
return true; // return error code
}
// channel ID
const int iCurID =
static_cast<int> ( GetValFromStream ( vecData, iPos, 1 ) );
// gain (read integer value)
const int iData =
static_cast<int> ( GetValFromStream ( vecData, iPos, 2 ) );
// we convert the gain from integer to double with range 0..1
const double dNewGain = static_cast<double> ( iData ) / ( 1 << 15 );
// invoke message action
emit ChangeChanGain ( iCurID, dNewGain );
return false; // no error
}
void CProtocol::CreateConClientListMes ( const CVector<CChannelInfo>& vecChanInfo )
{
const int iNumClients = vecChanInfo.Size();
// build data vector
CVector<uint8_t> vecData ( 0 );
int iPos = 0; // init position pointer
for ( int i = 0; i < iNumClients; i++ )
{
// convert strings to utf-8
const QByteArray strUTF8Name = vecChanInfo[i].strName.toUtf8();
const QByteArray strUTF8City = vecChanInfo[i].strCity.toUtf8();
// size of current list entry
const int iCurListEntrLen =
1 /* chan ID */ + 2 /* country */ +
4 /* instrument */ + 1 /* skill level */ +
4 /* IP address */ +
2 /* utf-8 str. size */ + strUTF8Name.size() +
2 /* utf-8 str. size */ + strUTF8City.size();
// make space for new data
vecData.Enlarge ( iCurListEntrLen );
// channel ID (1 byte)
PutValOnStream ( vecData, iPos,
static_cast<uint32_t> ( vecChanInfo[i].iChanID ), 1 );
// country (2 bytes)
PutValOnStream ( vecData, iPos,
static_cast<uint32_t> ( vecChanInfo[i].eCountry ), 2 );
// instrument (4 bytes)
PutValOnStream ( vecData, iPos,
static_cast<uint32_t> ( vecChanInfo[i].iInstrument ), 4 );
// skill level (1 byte)
PutValOnStream ( vecData, iPos,
static_cast<uint32_t> ( vecChanInfo[i].eSkillLevel ), 1 );
// IP address (4 bytes)
PutValOnStream ( vecData, iPos,
static_cast<uint32_t> ( vecChanInfo[i].iIpAddr ), 4 );
// name
PutStringUTF8OnStream ( vecData, iPos, strUTF8Name );
// city
PutStringUTF8OnStream ( vecData, iPos, strUTF8City );
}
CreateAndSendMessage ( PROTMESSID_CONN_CLIENTS_LIST, vecData );
}
bool CProtocol::EvaluateConClientListMes ( const CVector<uint8_t>& vecData )
{
int iPos = 0; // init position pointer
const int iDataLen = vecData.Size();
CVector<CChannelInfo> vecChanInfo ( 0 );
while ( iPos < iDataLen )
{
// check size (the next 12 bytes)
if ( ( iDataLen - iPos ) < 12 )
{
return true; // return error code
}
// channel ID (1 byte)
const int iChanID =
static_cast<int> ( GetValFromStream ( vecData, iPos, 1 ) );
// country (2 bytes)
const QLocale::Country eCountry =
static_cast<QLocale::Country> ( GetValFromStream ( vecData, iPos, 2 ) );
// instrument (4 bytes)
const int iInstrument =
static_cast<int> ( GetValFromStream ( vecData, iPos, 4 ) );
// skill level (1 byte)
const ESkillLevel eSkillLevel =
static_cast<ESkillLevel> ( GetValFromStream ( vecData, iPos, 1 ) );
// IP address (4 bytes)
const int iIpAddr =
static_cast<int> ( GetValFromStream ( vecData, iPos, 4 ) );
// name
QString strCurName;
if ( GetStringFromStream ( vecData,
iPos,
MAX_LEN_FADER_TAG,
strCurName ) )
{
return true; // return error code
}
// city
QString strCurCity;
if ( GetStringFromStream ( vecData,
iPos,
MAX_LEN_SERVER_CITY,
strCurCity ) )
{
return true; // return error code
}
// add channel information to vector
vecChanInfo.Add ( CChannelInfo ( iChanID,
iIpAddr,
strCurName,
eCountry,
strCurCity,
iInstrument,
eSkillLevel ) );
}
// check size: all data is read, the position must now be at the end
if ( iPos != iDataLen )
{
return true; // return error code
}
// invoke message action
emit ConClientListMesReceived ( vecChanInfo );
return false; // no error
}
void CProtocol::CreateReqConnClientsList()
{
CreateAndSendMessage ( PROTMESSID_REQ_CONN_CLIENTS_LIST, CVector<uint8_t> ( 0 ) );
}
bool CProtocol::EvaluateReqConnClientsList()
{
// invoke message action
emit ReqConnClientsList();
return false; // no error
}
void CProtocol::CreateChanInfoMes ( const CChannelCoreInfo ChanInfo )
{
int iPos = 0; // init position pointer
// convert strings to utf-8
const QByteArray strUTF8Name = ChanInfo.strName.toUtf8();
const QByteArray strUTF8City = ChanInfo.strCity.toUtf8();
// size of current list entry
const int iEntrLen =
2 /* country */ +
4 /* instrument */ + 1 /* skill level */ +
2 /* utf-8 str. size */ + strUTF8Name.size() +
2 /* utf-8 str. size */ + strUTF8City.size();
// build data vector
CVector<uint8_t> vecData ( iEntrLen );
// country (2 bytes)
PutValOnStream ( vecData, iPos,
static_cast<uint32_t> ( ChanInfo.eCountry ), 2 );
// instrument (4 bytes)
PutValOnStream ( vecData, iPos,
static_cast<uint32_t> ( ChanInfo.iInstrument ), 4 );
// skill level (1 byte)
PutValOnStream ( vecData, iPos,
static_cast<uint32_t> ( ChanInfo.eSkillLevel ), 1 );
// name
PutStringUTF8OnStream ( vecData, iPos, strUTF8Name );
// city
PutStringUTF8OnStream ( vecData, iPos, strUTF8City );
CreateAndSendMessage ( PROTMESSID_CHANNEL_INFOS, vecData );
}
bool CProtocol::EvaluateChanInfoMes ( const CVector<uint8_t>& vecData )
{
int iPos = 0; // init position pointer
const int iDataLen = vecData.Size();
CChannelCoreInfo ChanInfo;
// check size (the first 7 bytes)
if ( iDataLen < 7 )
{
return true; // return error code
}
// country (2 bytes)
ChanInfo.eCountry =
static_cast<QLocale::Country> ( GetValFromStream ( vecData, iPos, 2 ) );
// instrument (4 bytes)
ChanInfo.iInstrument =
static_cast<int> ( GetValFromStream ( vecData, iPos, 4 ) );
// skill level (1 byte)
ChanInfo.eSkillLevel =
static_cast<ESkillLevel> ( GetValFromStream ( vecData, iPos, 1 ) );
// name
if ( GetStringFromStream ( vecData,
iPos,
MAX_LEN_FADER_TAG,
ChanInfo.strName ) )
{
return true; // return error code
}
// city
if ( GetStringFromStream ( vecData,
iPos,
MAX_LEN_SERVER_CITY,
ChanInfo.strCity ) )
{
return true; // return error code
}
// check size: all data is read, the position must now be at the end
if ( iPos != iDataLen )
{
return true; // return error code
}
// invoke message action
emit ChangeChanInfo ( ChanInfo );
return false; // no error
}
void CProtocol::CreateReqChanInfoMes()
{
CreateAndSendMessage ( PROTMESSID_REQ_CHANNEL_INFOS, CVector<uint8_t> ( 0 ) );
}
bool CProtocol::EvaluateReqChanInfoMes()
{
// invoke message action
emit ReqChanInfo();
return false; // no error
}
void CProtocol::CreateChatTextMes ( const QString strChatText )
{
int iPos = 0; // init position pointer
// convert chat text string to utf-8
const QByteArray strUTF8ChatText = strChatText.toUtf8();
const int iStrUTF8Len = strUTF8ChatText.size(); // get utf-8 string size
// size of message body
const int iEntrLen = 2 /* utf-8 string size */ + iStrUTF8Len;
// build data vector
CVector<uint8_t> vecData ( iEntrLen );
// chat text
PutStringUTF8OnStream ( vecData, iPos, strUTF8ChatText );
CreateAndSendMessage ( PROTMESSID_CHAT_TEXT, vecData );
}
bool CProtocol::EvaluateChatTextMes ( const CVector<uint8_t>& vecData )
{
int iPos = 0; // init position pointer
// chat text
QString strChatText;
if ( GetStringFromStream ( vecData,
iPos,
MAX_LEN_CHAT_TEXT_PLUS_HTML,
strChatText ) )
{
return true; // return error code
}
// check size: all data is read, the position must now be at the end
if ( iPos != vecData.Size() )
{
return true; // return error code
}
// invoke message action
emit ChatTextReceived ( strChatText );
return false; // no error
}
void CProtocol::CreateNetwTranspPropsMes ( const CNetworkTransportProps& NetTrProps )
{
int iPos = 0; // init position pointer
// size of current message body
const int iEntrLen =
4 /* netw size */ +
2 /* block size fact */ +
1 /* num chan */ +
4 /* sam rate */ +
2 /* audiocod type */ +
2 /* version */ +
4 /* audiocod arg */;
// build data vector
CVector<uint8_t> vecData ( iEntrLen );
// length of the base network packet (frame) in bytes (4 bytes)
PutValOnStream ( vecData, iPos,
static_cast<uint32_t> ( NetTrProps.iBaseNetworkPacketSize ), 4 );
// block size factor (2 bytes)
PutValOnStream ( vecData, iPos,
static_cast<uint32_t> ( NetTrProps.iBlockSizeFact ), 2 );
// number of channels of the audio signal, e.g. "2" is stereo (1 byte)
PutValOnStream ( vecData, iPos,
static_cast<uint32_t> ( NetTrProps.iNumAudioChannels ), 1 );
// sample rate of the audio stream (4 bytes)
PutValOnStream ( vecData, iPos,
static_cast<uint32_t> ( NetTrProps.iSampleRate ), 4 );
// audio coding type (2 bytes)
PutValOnStream ( vecData, iPos,
static_cast<uint32_t> ( NetTrProps.eAudioCodingType ), 2 );
// version (2 bytes)
PutValOnStream ( vecData, iPos,
static_cast<uint32_t> ( NetTrProps.iVersion ), 2 );
// argument for the audio coder (4 bytes)
PutValOnStream ( vecData, iPos,
static_cast<uint32_t> ( NetTrProps.iAudioCodingArg ), 4 );
CreateAndSendMessage ( PROTMESSID_NETW_TRANSPORT_PROPS, vecData );
}
bool CProtocol::EvaluateNetwTranspPropsMes ( const CVector<uint8_t>& vecData )
{
int iPos = 0; // init position pointer
CNetworkTransportProps ReceivedNetwTranspProps;
// size of current message body
const int iEntrLen =
4 /* netw size */ +
2 /* block size fact */ +
1 /* num chan */ +
4 /* sam rate */ +
2 /* audiocod type */ +
2 /* version */ +
4 /* audiocod arg */;
// check size
if ( vecData.Size() != iEntrLen )
{
return true; // return error code
}
// length of the base network packet (frame) in bytes (4 bytes)
ReceivedNetwTranspProps.iBaseNetworkPacketSize =
static_cast<uint32_t> ( GetValFromStream ( vecData, iPos, 4 ) );
// at least CELT_MINIMUM_NUM_BYTES bytes are required for the CELC codec
if ( ( ReceivedNetwTranspProps.iBaseNetworkPacketSize < CELT_MINIMUM_NUM_BYTES ) ||
( ReceivedNetwTranspProps.iBaseNetworkPacketSize > MAX_SIZE_BYTES_NETW_BUF ) )
{
return true; // return error code
}
// block size factor (2 bytes)
ReceivedNetwTranspProps.iBlockSizeFact =
static_cast<uint16_t> ( GetValFromStream ( vecData, iPos, 2 ) );
if ( ( ReceivedNetwTranspProps.iBlockSizeFact != FRAME_SIZE_FACTOR_PREFERRED ) &&
( ReceivedNetwTranspProps.iBlockSizeFact != FRAME_SIZE_FACTOR_DEFAULT ) &&
( ReceivedNetwTranspProps.iBlockSizeFact != FRAME_SIZE_FACTOR_SAFE ) )
{
return true; // return error code
}
// number of channels of the audio signal, only mono (1 channel) or
// stereo (2 channels) allowed (1 byte)
ReceivedNetwTranspProps.iNumAudioChannels =
static_cast<uint32_t> ( GetValFromStream ( vecData, iPos, 1 ) );
if ( ( ReceivedNetwTranspProps.iNumAudioChannels != 1 ) &&
( ReceivedNetwTranspProps.iNumAudioChannels != 2 ) )
{
return true; // return error code
}
// sample rate of the audio stream (4 bytes)
ReceivedNetwTranspProps.iSampleRate =
static_cast<uint32_t> ( GetValFromStream ( vecData, iPos, 4 ) );
// audio coding type (2 bytes) with error check
const int iRecCodingType =
static_cast<int> ( GetValFromStream ( vecData, iPos, 2 ) );
// note that CT_NONE is not a valid setting but only used for server
// initialization
if ( ( iRecCodingType != CT_CELT ) &&
( iRecCodingType != CT_OPUS ) &&
( iRecCodingType != CT_OPUS64 ) )
{
return true;
}
ReceivedNetwTranspProps.eAudioCodingType =
static_cast<EAudComprType> ( iRecCodingType );
// version (2 bytes)
ReceivedNetwTranspProps.iVersion =
static_cast<uint32_t> ( GetValFromStream ( vecData, iPos, 2 ) );
// argument for the audio coder (4 bytes)
ReceivedNetwTranspProps.iAudioCodingArg =
static_cast<int32_t> ( GetValFromStream ( vecData, iPos, 4 ) );
// invoke message action
emit NetTranspPropsReceived ( ReceivedNetwTranspProps );
return false; // no error
}
void CProtocol::CreateReqNetwTranspPropsMes()
{
CreateAndSendMessage ( PROTMESSID_REQ_NETW_TRANSPORT_PROPS,
CVector<uint8_t> ( 0 ) );
}
bool CProtocol::EvaluateReqNetwTranspPropsMes()
{
// invoke message action
emit ReqNetTranspProps();
return false; // no error
}
void CProtocol::CreateLicenceRequiredMes ( const ELicenceType eLicenceType )
{
CVector<uint8_t> vecData ( 1 ); // 1 bytes of data
int iPos = 0; // init position pointer
// build data vector
PutValOnStream ( vecData, iPos, static_cast<uint32_t> ( eLicenceType ), 1 );
CreateAndSendMessage ( PROTMESSID_LICENCE_REQUIRED, vecData );
}
bool CProtocol::EvaluateLicenceRequiredMes ( const CVector<uint8_t>& vecData )
{
int iPos = 0; // init position pointer
// check size
if ( vecData.Size() != 1 )
{
return true; // return error code
}
// extract licence type
const ELicenceType eLicenceType =
static_cast<ELicenceType> ( GetValFromStream ( vecData, iPos, 1 ) );
if ( ( eLicenceType != LT_CREATIVECOMMONS ) &&
( eLicenceType != LT_NO_LICENCE ) )
{
return true; // return error code
}
// invoke message action
emit LicenceRequired ( eLicenceType );
return false; // no error
}
void CProtocol::CreateOpusSupportedMes()
{
CreateAndSendMessage ( PROTMESSID_OPUS_SUPPORTED,
CVector<uint8_t> ( 0 ) );
}
void CProtocol::CreateReqChannelLevelListMes ( const bool bRCL )
{
CVector<uint8_t> vecData ( 1 ); // 1 byte of data
int iPos = 0; // init position pointer
PutValOnStream ( vecData, iPos,
static_cast<uint32_t> ( bRCL ), 1 );
CreateAndSendMessage ( PROTMESSID_REQ_CHANNEL_LEVEL_LIST, vecData );
}
bool CProtocol::EvaluateReqChannelLevelListMes ( const CVector<uint8_t>& vecData )
{
int iPos = 0; // init position pointer
// check size
if ( vecData.Size() != 1 )
{
return true; // return error code
}
// extract opt in / out for channel levels
uint32_t val = GetValFromStream ( vecData, iPos, 1 );
if ( val != 0 && val != 1 )
{
return true; // return error code
}
// invoke message action
emit ReqChannelLevelList ( static_cast<bool> ( val ) );
return false; // no error
}
// Connection less messages ----------------------------------------------------
void CProtocol::CreateCLPingMes ( const CHostAddress& InetAddr, const int iMs )
{
int iPos = 0; // init position pointer
// build data vector (4 bytes long)
CVector<uint8_t> vecData ( 4 );
// transmit time (4 bytes)
PutValOnStream ( vecData, iPos, static_cast<uint32_t> ( iMs ), 4 );
CreateAndImmSendConLessMessage ( PROTMESSID_CLM_PING_MS,
vecData,
InetAddr );
}
bool CProtocol::EvaluateCLPingMes ( const CHostAddress& InetAddr,
const CVector<uint8_t>& vecData )
{
int iPos = 0; // init position pointer
// check size
if ( vecData.Size() != 4 )
{
return true; // return error code
}
// invoke message action
emit CLPingReceived ( InetAddr,
static_cast<int> ( GetValFromStream ( vecData, iPos, 4 ) ) );
return false; // no error
}
void CProtocol::CreateCLPingWithNumClientsMes ( const CHostAddress& InetAddr,
const int iMs,
const int iNumClients )
{
int iPos = 0; // init position pointer
// build data vector (5 bytes long)
CVector<uint8_t> vecData ( 5 );
// transmit time (4 bytes)
PutValOnStream ( vecData, iPos, static_cast<uint32_t> ( iMs ), 4 );
// current number of connected clients (1 byte)
PutValOnStream ( vecData, iPos, static_cast<uint32_t> ( iNumClients ), 1 );
CreateAndImmSendConLessMessage ( PROTMESSID_CLM_PING_MS_WITHNUMCLIENTS,
vecData,
InetAddr );
}
bool CProtocol::EvaluateCLPingWithNumClientsMes ( const CHostAddress& InetAddr,
const CVector<uint8_t>& vecData )
{
int iPos = 0; // init position pointer
// check size
if ( vecData.Size() != 5 )
{
return true; // return error code
}
// transmit time
const int iCurMs =
static_cast<int> ( GetValFromStream ( vecData, iPos, 4 ) );
// current number of connected clients
const int iCurNumClients =
static_cast<int> ( GetValFromStream ( vecData, iPos, 1 ) );
// invoke message action
emit CLPingWithNumClientsReceived ( InetAddr, iCurMs, iCurNumClients );
return false; // no error
}
void CProtocol::CreateCLServerFullMes ( const CHostAddress& InetAddr )
{
CreateAndImmSendConLessMessage ( PROTMESSID_CLM_SERVER_FULL,
CVector<uint8_t> ( 0 ),
InetAddr );
}
bool CProtocol::EvaluateCLServerFullMes()
{
// invoke message action
emit ServerFullMesReceived();
return false; // no error
}
void CProtocol::CreateCLRegisterServerMes ( const CHostAddress& InetAddr,
const CHostAddress& LInetAddr,
const CServerCoreInfo& ServerInfo )
{
int iPos = 0; // init position pointer
// convert server info strings to utf-8
const QByteArray strUTF8LInetAddr = LInetAddr.InetAddr.toString().toUtf8();
const QByteArray strUTF8Name = ServerInfo.strName.toUtf8();
const QByteArray strUTF8City = ServerInfo.strCity.toUtf8();
// size of current message body
const int iEntrLen =
2 /* server internal port number */ +
2 /* country */ +
1 /* maximum number of connected clients */ +
1 /* is permanent flag */ +
2 /* name utf-8 string size */ + strUTF8Name.size() +
2 /* server internal address utf-8 string size */ + strUTF8LInetAddr.size() +
2 /* city utf-8 string size */ + strUTF8City.size();
// build data vector
CVector<uint8_t> vecData ( iEntrLen );
// port number (2 bytes)
PutValOnStream ( vecData, iPos,
static_cast<uint32_t> ( LInetAddr.iPort ), 2 );
// country (2 bytes)
PutValOnStream ( vecData, iPos,
static_cast<uint32_t> ( ServerInfo.eCountry ), 2 );
// maximum number of connected clients (1 byte)
PutValOnStream ( vecData, iPos,
static_cast<uint32_t> ( ServerInfo.iMaxNumClients ), 1 );
// "is permanent" flag (1 byte)
PutValOnStream ( vecData, iPos,
static_cast<uint32_t> ( ServerInfo.bPermanentOnline ), 1 );
// name
PutStringUTF8OnStream ( vecData, iPos, strUTF8Name );
// server internal address (formerly unused topic)
PutStringUTF8OnStream ( vecData, iPos, strUTF8LInetAddr );
// city
PutStringUTF8OnStream ( vecData, iPos, strUTF8City );
CreateAndImmSendConLessMessage ( PROTMESSID_CLM_REGISTER_SERVER,
vecData,
InetAddr );
}
bool CProtocol::EvaluateCLRegisterServerMes ( const CHostAddress& InetAddr,
const CVector<uint8_t>& vecData )
{
int iPos = 0; // init position pointer
const int iDataLen = vecData.Size();
QString sLocHost; // temp string for server internal address
CHostAddress LInetAddr;
CServerCoreInfo RecServerInfo;
// check size (the first 6 bytes)
if ( iDataLen < 6 )
{
return true; // return error code
}
// port number (2 bytes)
LInetAddr.iPort =
static_cast<quint16> ( GetValFromStream ( vecData, iPos, 2 ) );
// country (2 bytes)
RecServerInfo.eCountry =
static_cast<QLocale::Country> ( GetValFromStream ( vecData, iPos, 2 ) );
// maximum number of connected clients (1 byte)
RecServerInfo.iMaxNumClients =
static_cast<int> ( GetValFromStream ( vecData, iPos, 1 ) );
// "is permanent" flag (1 byte)
RecServerInfo.bPermanentOnline =
static_cast<bool> ( GetValFromStream ( vecData, iPos, 1 ) );
// server name
if ( GetStringFromStream ( vecData,
iPos,
MAX_LEN_SERVER_NAME,
RecServerInfo.strName ) )
{
return true; // return error code
}
// server internal address
if ( GetStringFromStream ( vecData,
iPos,
MAX_LEN_IP_ADDRESS,
sLocHost ) )
{
return true; // return error code
}
if ( sLocHost.isEmpty() )
{
// old server, empty "topic", register as local host
LInetAddr.InetAddr.setAddress ( QHostAddress::LocalHost );
}
else if ( !LInetAddr.InetAddr.setAddress ( sLocHost ) )
{
return true; // return error code
}
// server city
if ( GetStringFromStream ( vecData,
iPos,
MAX_LEN_SERVER_CITY,
RecServerInfo.strCity ) )
{
return true; // return error code
}
// check size: all data is read, the position must now be at the end
if ( iPos != iDataLen )
{
return true; // return error code
}
// invoke message action
emit CLRegisterServerReceived ( InetAddr, LInetAddr, RecServerInfo );
return false; // no error
}
void CProtocol::CreateCLUnregisterServerMes ( const CHostAddress& InetAddr )
{
CreateAndImmSendConLessMessage ( PROTMESSID_CLM_UNREGISTER_SERVER,
CVector<uint8_t> ( 0 ),
InetAddr );
}
bool CProtocol::EvaluateCLUnregisterServerMes ( const CHostAddress& InetAddr )
{
// invoke message action
emit CLUnregisterServerReceived ( InetAddr );
return false; // no error
}
void CProtocol::CreateCLServerListMes ( const CHostAddress& InetAddr,
const CVector<CServerInfo> vecServerInfo )
{
const int iNumServers = vecServerInfo.Size();
// build data vector
CVector<uint8_t> vecData ( 0 );
int iPos = 0; // init position pointer
for ( int i = 0; i < iNumServers; i++ )
{
// convert server list strings to utf-8
const QByteArray strUTF8Name = vecServerInfo[i].strName.toUtf8();
const QByteArray strUTF8Empty = QString ( "" ).toUtf8();
const QByteArray strUTF8City = vecServerInfo[i].strCity.toUtf8();
// size of current list entry
const int iCurListEntrLen =
4 /* IP address */ +
2 /* port number */ +
2 /* country */ +
1 /* maximum number of connected clients */ +
1 /* is permanent flag */ +
2 /* name utf-8 string size */ + strUTF8Name.size() +
2 /* empty string */ +
2 /* city utf-8 string size */ + strUTF8City.size();
// make space for new data
vecData.Enlarge ( iCurListEntrLen );
// IP address (4 bytes)
// note the Server List manager has put the internal details in HostAddr where required
PutValOnStream ( vecData, iPos, static_cast<uint32_t> (
vecServerInfo[i].HostAddr.InetAddr.toIPv4Address() ), 4 );
// port number (2 bytes)
// note the Server List manager has put the internal details in HostAddr where required
PutValOnStream ( vecData, iPos,
static_cast<uint32_t> ( vecServerInfo[i].HostAddr.iPort ), 2 );
// country (2 bytes)
PutValOnStream ( vecData, iPos,
static_cast<uint32_t> ( vecServerInfo[i].eCountry ), 2 );
// maximum number of connected clients (1 byte)
PutValOnStream ( vecData, iPos,
static_cast<uint32_t> ( vecServerInfo[i].iMaxNumClients ), 1 );
// "is permanent" flag (1 byte)
PutValOnStream ( vecData, iPos,
static_cast<uint32_t> ( vecServerInfo[i].bPermanentOnline ), 1 );
// name
PutStringUTF8OnStream ( vecData, iPos, strUTF8Name );
// empty string
PutStringUTF8OnStream ( vecData, iPos, strUTF8Empty );
// city
PutStringUTF8OnStream ( vecData, iPos, strUTF8City );
}
CreateAndImmSendConLessMessage ( PROTMESSID_CLM_SERVER_LIST,
vecData,
InetAddr );
}
bool CProtocol::EvaluateCLServerListMes ( const CHostAddress& InetAddr,
const CVector<uint8_t>& vecData )
{
int iPos = 0; // init position pointer
const int iDataLen = vecData.Size();
CVector<CServerInfo> vecServerInfo ( 0 );
while ( iPos < iDataLen )
{
// check size (the next 10 bytes)
if ( ( iDataLen - iPos ) < 10 )
{
return true; // return error code
}
// IP address (4 bytes)
const quint32 iIpAddr =
static_cast<quint32> ( GetValFromStream ( vecData, iPos, 4 ) );
// port number (2 bytes)
const quint16 iPort =
static_cast<quint16> ( GetValFromStream ( vecData, iPos, 2 ) );
// country (2 bytes)
const QLocale::Country eCountry =
static_cast<QLocale::Country> ( GetValFromStream ( vecData, iPos, 2 ) );
// maximum number of connected clients (1 byte)
const int iMaxNumClients =
static_cast<int> ( GetValFromStream ( vecData, iPos, 1 ) );
// "is permanent" flag (1 byte)
const bool bPermanentOnline =
static_cast<bool> ( GetValFromStream ( vecData, iPos, 1 ) );
// server name
QString strName;
if ( GetStringFromStream ( vecData,
iPos,
MAX_LEN_SERVER_NAME,
strName ) )
{
return true; // return error code
}
// empty
QString strEmpty;
if ( GetStringFromStream ( vecData,
iPos,
MAX_LEN_IP_ADDRESS,
strEmpty ) )
{
return true; // return error code
}
// server city
QString strCity;
if ( GetStringFromStream ( vecData,
iPos,
MAX_LEN_SERVER_CITY,
strCity ) )
{
return true; // return error code
}
// add server information to vector
vecServerInfo.Add (
CServerInfo ( CHostAddress ( QHostAddress ( iIpAddr ), iPort ),
CHostAddress ( QHostAddress ( iIpAddr ), iPort ),
strName,
eCountry,
strCity,
iMaxNumClients,
bPermanentOnline ) );
}
// check size: all data is read, the position must now be at the end
if ( iPos != iDataLen )
{
return true; // return error code
}
// invoke message action
emit CLServerListReceived ( InetAddr, vecServerInfo );
return false; // no error
}
void CProtocol::CreateCLReqServerListMes ( const CHostAddress& InetAddr )
{
CreateAndImmSendConLessMessage ( PROTMESSID_CLM_REQ_SERVER_LIST,
CVector<uint8_t> ( 0 ),
InetAddr );
}
bool CProtocol::EvaluateCLReqServerListMes ( const CHostAddress& InetAddr )
{
// invoke message action
emit CLReqServerList ( InetAddr );
return false; // no error
}
void CProtocol::CreateCLSendEmptyMesMes ( const CHostAddress& InetAddr,
const CHostAddress& TargetInetAddr )
{
int iPos = 0; // init position pointer
// build data vector (6 bytes long)
CVector<uint8_t> vecData ( 6 );
// IP address (4 bytes)
PutValOnStream ( vecData, iPos, static_cast<uint32_t> (
TargetInetAddr.InetAddr.toIPv4Address() ), 4 );
// port number (2 bytes)
PutValOnStream ( vecData, iPos,
static_cast<uint32_t> ( TargetInetAddr.iPort ), 2 );
CreateAndImmSendConLessMessage ( PROTMESSID_CLM_SEND_EMPTY_MESSAGE,
vecData,
InetAddr );
}
bool CProtocol::EvaluateCLSendEmptyMesMes ( const CVector<uint8_t>& vecData )
{
int iPos = 0; // init position pointer
// check size
if ( vecData.Size() != 6 )
{
return true; // return error code
}
// IP address (4 bytes)
const quint32 iIpAddr =
static_cast<int> ( GetValFromStream ( vecData, iPos, 4 ) );
// port number (2 bytes)
const quint16 iPort =
static_cast<int> ( GetValFromStream ( vecData, iPos, 2 ) );
// invoke message action
emit CLSendEmptyMes ( CHostAddress ( QHostAddress ( iIpAddr ), iPort ) );
return false; // no error
}
void CProtocol::CreateCLEmptyMes ( const CHostAddress& InetAddr )
{
// special message: for this message there exist no Evaluate
// function
CreateAndImmSendConLessMessage ( PROTMESSID_CLM_EMPTY_MESSAGE,
CVector<uint8_t> ( 0 ),
InetAddr );
}
void CProtocol::CreateCLDisconnection ( const CHostAddress& InetAddr )
{
CreateAndImmSendConLessMessage ( PROTMESSID_CLM_DISCONNECTION,
CVector<uint8_t> ( 0 ),
InetAddr );
}
bool CProtocol::EvaluateCLDisconnectionMes ( const CHostAddress& InetAddr )
{
// invoke message action
emit CLDisconnection ( InetAddr );
return false; // no error
}
void CProtocol::CreateCLVersionAndOSMes ( const CHostAddress& InetAddr )
{
int iPos = 0; // init position pointer
// get the version number string
const QString strVerion = VERSION;
// convert version string to utf-8
const QByteArray strUTF8Version = strVerion.toUtf8();
// size of current message body
const int iEntrLen =
1 /* operating system */ +
2 /* version utf-8 string size */ + strUTF8Version.size();
// build data vector
CVector<uint8_t> vecData ( iEntrLen );
// operating system (1 byte)
PutValOnStream ( vecData, iPos,
static_cast<uint32_t> ( COSUtil::GetOperatingSystem() ), 1 );
// version
PutStringUTF8OnStream ( vecData, iPos, strUTF8Version );
CreateAndImmSendConLessMessage ( PROTMESSID_CLM_VERSION_AND_OS,
vecData,
InetAddr );
}
bool CProtocol::EvaluateCLVersionAndOSMes ( const CHostAddress& InetAddr,
const CVector<uint8_t>& vecData )
{
int iPos = 0; // init position pointer
const int iDataLen = vecData.Size();
// check size (the first 1 byte)
if ( iDataLen < 1 )
{
return true; // return error code
}
// operating system (1 byte)
const COSUtil::EOpSystemType eOSType =
static_cast<COSUtil::EOpSystemType> ( GetValFromStream ( vecData, iPos, 1 ) );
// version text
QString strVersion;
if ( GetStringFromStream ( vecData,
iPos,
MAX_LEN_VERSION_TEXT,
strVersion ) )
{
return true; // return error code
}
// check size: all data is read, the position must now be at the end
if ( iPos != iDataLen )
{
return true; // return error code
}
// invoke message action
emit CLVersionAndOSReceived ( InetAddr, eOSType, strVersion );
return false; // no error
}
void CProtocol::CreateCLReqVersionAndOSMes ( const CHostAddress& InetAddr )
{
CreateAndImmSendConLessMessage ( PROTMESSID_CLM_REQ_VERSION_AND_OS,
CVector<uint8_t> ( 0 ),
InetAddr );
}
bool CProtocol::EvaluateCLReqVersionAndOSMes ( const CHostAddress& InetAddr )
{
// invoke message action
emit CLReqVersionAndOS ( InetAddr );
return false; // no error
}
void CProtocol::CreateCLConnClientsListMes ( const CHostAddress& InetAddr,
const CVector<CChannelInfo>& vecChanInfo )
{
const int iNumClients = vecChanInfo.Size();
// build data vector
CVector<uint8_t> vecData ( 0 );
int iPos = 0; // init position pointer
for ( int i = 0; i < iNumClients; i++ )
{
// convert strings to utf-8
const QByteArray strUTF8Name = vecChanInfo[i].strName.toUtf8();
const QByteArray strUTF8City = vecChanInfo[i].strCity.toUtf8();
// size of current list entry
const int iCurListEntrLen =
1 /* chan ID */ + 2 /* country */ +
4 /* instrument */ + 1 /* skill level */ +
4 /* IP address */ +
2 /* utf-8 str. size */ + strUTF8Name.size() +
2 /* utf-8 str. size */ + strUTF8City.size();
// make space for new data
vecData.Enlarge ( iCurListEntrLen );
// channel ID (1 byte)
PutValOnStream ( vecData, iPos,
static_cast<uint32_t> ( vecChanInfo[i].iChanID ), 1 );
// country (2 bytes)
PutValOnStream ( vecData, iPos,
static_cast<uint32_t> ( vecChanInfo[i].eCountry ), 2 );
// instrument (4 bytes)
PutValOnStream ( vecData, iPos,
static_cast<uint32_t> ( vecChanInfo[i].iInstrument ), 4 );
// skill level (1 byte)
PutValOnStream ( vecData, iPos,
static_cast<uint32_t> ( vecChanInfo[i].eSkillLevel ), 1 );
// IP address (4 bytes)
PutValOnStream ( vecData, iPos,
static_cast<uint32_t> ( vecChanInfo[i].iIpAddr ), 4 );
// name
PutStringUTF8OnStream ( vecData, iPos, strUTF8Name );
// city
PutStringUTF8OnStream ( vecData, iPos, strUTF8City );
}
CreateAndImmSendConLessMessage ( PROTMESSID_CLM_CONN_CLIENTS_LIST,
vecData,
InetAddr );
}
bool CProtocol::EvaluateCLConnClientsListMes ( const CHostAddress& InetAddr,
const CVector<uint8_t>& vecData )
{
int iPos = 0; // init position pointer
const int iDataLen = vecData.Size();
CVector<CChannelInfo> vecChanInfo ( 0 );
while ( iPos < iDataLen )
{
// check size (the next 12 bytes)
if ( ( iDataLen - iPos ) < 12 )
{
return true; // return error code
}
// channel ID (1 byte)
const int iChanID =
static_cast<int> ( GetValFromStream ( vecData, iPos, 1 ) );
// country (2 bytes)
const QLocale::Country eCountry =
static_cast<QLocale::Country> ( GetValFromStream ( vecData, iPos, 2 ) );
// instrument (4 bytes)
const int iInstrument =
static_cast<int> ( GetValFromStream ( vecData, iPos, 4 ) );
// skill level (1 byte)
const ESkillLevel eSkillLevel =
static_cast<ESkillLevel> ( GetValFromStream ( vecData, iPos, 1 ) );
// IP address (4 bytes)
const int iIpAddr =
static_cast<int> ( GetValFromStream ( vecData, iPos, 4 ) );
// name
QString strCurName;
if ( GetStringFromStream ( vecData,
iPos,
MAX_LEN_FADER_TAG,
strCurName ) )
{
return true; // return error code
}
// city
QString strCurCity;
if ( GetStringFromStream ( vecData,
iPos,
MAX_LEN_SERVER_CITY,
strCurCity ) )
{
return true; // return error code
}
// add channel information to vector
vecChanInfo.Add ( CChannelInfo ( iChanID,
iIpAddr,
strCurName,
eCountry,
strCurCity,
iInstrument,
eSkillLevel ) );
}
// check size: all data is read, the position must now be at the end
if ( iPos != iDataLen )
{
return true; // return error code
}
// invoke message action
emit CLConnClientsListMesReceived ( InetAddr, vecChanInfo );
return false; // no error
}
void CProtocol::CreateCLReqConnClientsListMes ( const CHostAddress& InetAddr )
{
CreateAndImmSendConLessMessage ( PROTMESSID_CLM_REQ_CONN_CLIENTS_LIST,
CVector<uint8_t> ( 0 ),
InetAddr );
}
bool CProtocol::EvaluateCLReqConnClientsListMes ( const CHostAddress& InetAddr )
{
// invoke message action
emit CLReqConnClientsList ( InetAddr );
return false; // no error
}
void CProtocol::CreateCLChannelLevelListMes ( const CHostAddress& InetAddr,
const CVector<uint16_t>& vecLevelList,
const int iNumClients )
{
// This must be a multiple of bytes at four bits per client
const int iNumBytes = ( iNumClients + 1 ) / 2;
CVector<uint8_t> vecData( iNumBytes );
int iPos = 0; // init position pointer
for ( int i = 0, j = 0; i < iNumClients; i += 2 /* pack two per byte */, j++ )
{
uint16_t levelLo = vecLevelList[i] & 0x0F;
uint16_t levelHi = ( i + 1 < iNumClients ) ? vecLevelList[i + 1] & 0x0F : 0x0F;
uint8_t byte = static_cast<uint8_t> ( levelLo | ( levelHi << 4 ) );
PutValOnStream ( vecData, iPos,
static_cast<uint32_t> ( byte ), 1 );
}
CreateAndImmSendConLessMessage ( PROTMESSID_CLM_CHANNEL_LEVEL_LIST,
vecData,
InetAddr );
}
bool CProtocol::EvaluateCLChannelLevelListMes ( const CHostAddress& InetAddr,
const CVector<uint8_t>& vecData )
{
int iPos = 0; // init position pointer
const int iDataLen = vecData.Size(); // four bits per channel, 2 channels per byte
// may have one too many entries, last being 0xF
int iVecLen = iDataLen * 2; // one ushort per channel
if ( iVecLen > MAX_NUM_CHANNELS )
{
return true; // return error code
}
CVector<uint16_t> vecLevelList ( iVecLen );
for (int i = 0, j = 0; i < iDataLen; i++, j += 2 )
{
uint8_t byte = static_cast<uint8_t> ( GetValFromStream ( vecData, iPos, 1 ) );
uint16_t levelLo = byte & 0x0F;
uint16_t levelHi = ( byte >> 4 ) & 0x0F;
vecLevelList[j] = levelLo;
if ( levelHi != 0x0F )
{
vecLevelList[j + 1] = levelHi;
}
else
{
vecLevelList.resize ( iVecLen - 1 );
break;
}
}
// invoke message action
emit CLChannelLevelListReceived ( InetAddr, vecLevelList );
return false; // no error
}
/******************************************************************************\
* Message generation and parsing *
\******************************************************************************/
bool CProtocol::ParseMessageFrame ( const CVector<uint8_t>& vecbyData,
const int iNumBytesIn,
CVector<uint8_t>& vecbyMesBodyData,
int& iCnt,
int& iID )
{
int i;
int iCurPos;
// vector must be at least "MESS_LEN_WITHOUT_DATA_BYTE" bytes long
if ( iNumBytesIn < MESS_LEN_WITHOUT_DATA_BYTE )
{
return true; // return error code
}
// Decode header -----------------------------------------------------------
iCurPos = 0; // start from beginning
// 2 bytes TAG
const int iTag = static_cast<int> ( GetValFromStream ( vecbyData, iCurPos, 2 ) );
// check if tag is correct
if ( iTag != 0 )
{
return true; // return error code
}
// 2 bytes ID
iID = static_cast<int> ( GetValFromStream ( vecbyData, iCurPos, 2 ) );
// 1 byte cnt
iCnt = static_cast<int> ( GetValFromStream ( vecbyData, iCurPos, 1 ) );
// 2 bytes length
const int iLenBy = static_cast<int> ( GetValFromStream ( vecbyData, iCurPos, 2 ) );
// make sure the length is correct
if ( iLenBy != iNumBytesIn - MESS_LEN_WITHOUT_DATA_BYTE )
{
return true; // return error code
}
// Now check CRC -----------------------------------------------------------
CCRC CRCObj;
const int iLenCRCCalc = MESS_HEADER_LENGTH_BYTE + iLenBy;
iCurPos = 0; // start from the beginning
for ( i = 0; i < iLenCRCCalc; i++ )
{
CRCObj.AddByte ( static_cast<uint8_t> (
GetValFromStream ( vecbyData, iCurPos, 1 ) ) );
}
if ( CRCObj.GetCRC () != GetValFromStream ( vecbyData, iCurPos, 2 ) )
{
return true; // return error code
}
// Extract actual data -----------------------------------------------------
// TODO this memory allocation is done in the real time thread but should be
// done in the low priority protocol management thread
vecbyMesBodyData.Init ( iLenBy );
iCurPos = MESS_HEADER_LENGTH_BYTE; // start from beginning of data
for ( i = 0; i < iLenBy; i++ )
{
vecbyMesBodyData[i] = static_cast<uint8_t> (
GetValFromStream ( vecbyData, iCurPos, 1 ) );
}
return false; // no error
}
uint32_t CProtocol::GetValFromStream ( const CVector<uint8_t>& vecIn,
int& iPos,
const int iNumOfBytes )
{
/*
note: iPos is automatically incremented in this function
*/
// 4 bytes maximum since we return uint32
Q_ASSERT ( ( iNumOfBytes > 0 ) && ( iNumOfBytes <= 4 ) );
Q_ASSERT ( vecIn.Size() >= iPos + iNumOfBytes );
uint32_t iRet = 0;
for ( int i = 0; i < iNumOfBytes; i++ )
{
iRet |= vecIn[iPos] << ( i * 8 /* size of byte */ );
iPos++;
}
return iRet;
}
bool CProtocol::GetStringFromStream ( const CVector<uint8_t>& vecIn,
int& iPos,
const int iMaxStringLen,
QString& strOut )
{
/*
note: iPos is automatically incremented in this function
*/
const int iInLen = vecIn.Size();
// check if at least two bytes are available
if ( ( iInLen - iPos ) < 2 )
{
return true; // return error code
}
// number of bytes for utf-8 string (2 bytes)
const int iStrUTF8Len =
static_cast<int> ( GetValFromStream ( vecIn, iPos, 2 ) );
// (note that iPos was incremented by 2 in the above code!)
if ( ( iInLen - iPos ) < iStrUTF8Len )
{
return true; // return error code
}
// string (n bytes)
QByteArray sStringUTF8;
for ( int i = 0; i < iStrUTF8Len; i++ )
{
// byte-by-byte copying of the string data
sStringUTF8.append ( static_cast<char> ( GetValFromStream ( vecIn, iPos, 1 ) ) );
}
// convert utf-8 byte array in the return string
strOut = QString::fromUtf8 ( sStringUTF8 );
// check length of actual string
if ( strOut.size() > iMaxStringLen )
{
return true; // return error code
}
return false; // no error
}
void CProtocol::GenMessageFrame ( CVector<uint8_t>& vecOut,
const int iCnt,
const int iID,
const CVector<uint8_t>& vecData )
{
int i;
// query length of data vector
const int iDataLenByte = vecData.Size();
// total length of message
const int iTotLenByte = MESS_LEN_WITHOUT_DATA_BYTE + iDataLenByte;
// init message vector
vecOut.Init ( iTotLenByte );
// Encode header -----------------------------------------------------------
int iCurPos = 0; // init position pointer
// 2 bytes TAG (all zero bits)
PutValOnStream ( vecOut, iCurPos,
static_cast<uint32_t> ( 0 ), 2 );
// 2 bytes ID
PutValOnStream ( vecOut, iCurPos,
static_cast<uint32_t> ( iID ), 2 );
// 1 byte cnt
PutValOnStream ( vecOut, iCurPos,
static_cast<uint32_t> ( iCnt ), 1 );
// 2 bytes length
PutValOnStream ( vecOut, iCurPos,
static_cast<uint32_t> ( iDataLenByte ), 2 );
// encode data -----
for ( i = 0; i < iDataLenByte; i++ )
{
PutValOnStream ( vecOut, iCurPos,
static_cast<uint32_t> ( vecData[i] ), 1 );
}
// Encode CRC --------------------------------------------------------------
CCRC CRCObj;
iCurPos = 0; // start from beginning
const int iLenCRCCalc = MESS_HEADER_LENGTH_BYTE + iDataLenByte;
for ( i = 0; i < iLenCRCCalc; i++ )
{
CRCObj.AddByte ( static_cast<uint8_t> (
GetValFromStream ( vecOut, iCurPos, 1 ) ) );
}
PutValOnStream ( vecOut, iCurPos,
static_cast<uint32_t> ( CRCObj.GetCRC() ), 2 );
}
void CProtocol::PutValOnStream ( CVector<uint8_t>& vecIn,
int& iPos,
const uint32_t iVal,
const int iNumOfBytes )
{
/*
note: iPos is automatically incremented in this function
*/
// 4 bytes maximum since we use uint32
Q_ASSERT ( ( iNumOfBytes > 0 ) && ( iNumOfBytes <= 4 ) );
Q_ASSERT ( vecIn.Size() >= iPos + iNumOfBytes );
for ( int i = 0; i < iNumOfBytes; i++ )
{
vecIn[iPos] =
( iVal >> ( i * 8 /* size of byte */ ) ) & 255 /* 11111111 */;
iPos++;
}
}
void CProtocol::PutStringUTF8OnStream ( CVector<uint8_t>& vecIn,
int& iPos,
const QByteArray& sStringUTF8 )
{
// get the utf-8 string size
const int iStrUTF8Len = sStringUTF8.size();
// number of bytes for utf-8 string (2 bytes)
PutValOnStream ( vecIn, iPos,
static_cast<uint32_t> ( iStrUTF8Len ), 2 );
// actual utf-8 string (n bytes)
for ( int j = 0; j < iStrUTF8Len; j++ )
{
// byte-by-byte copying of the utf-8 string data
PutValOnStream ( vecIn, iPos,
static_cast<uint32_t> ( sStringUTF8[j] ), 1 );
}
}
Reference in a new issue View git blame Copy permalink