jamulus/linux/sound.cpp

370 lines
11 KiB
C++
Executable file

/******************************************************************************\
* Copyright (c) 2004-2009
*
* Author(s):
* Volker Fischer, Alexander Kurpiers
*
* This code is based on the Open-Source sound interface implementation of
* the Dream DRM Receiver project.
*
\******************************************************************************/
#include "sound.h"
#ifdef WITH_SOUND
// Wave in *********************************************************************
void CSound::InitRecording()
{
int err;
// if recording device was already open, close it first
if ( rhandle != NULL )
{
snd_pcm_close ( rhandle );
}
/* record device: The most important ALSA interfaces to the PCM devices are
the "plughw" and the "hw" interface. If you use the "plughw" interface,
you need not care much about the sound hardware. If your soundcard does
not support the sample rate or sample format you specify, your data will
be automatically converted. This also applies to the access type and the
number of channels. With the "hw" interface, you have to check whether
your hardware supports the configuration you would like to use */
// either "hw:0,0" or "plughw:0,0"
if ( err = snd_pcm_open ( &rhandle, "hw:0,0", SND_PCM_STREAM_CAPTURE, 0 ) != 0 )
{
qDebug ( "open error: %s", snd_strerror ( err ) );
}
// recording should be blocking
if ( err = snd_pcm_nonblock ( rhandle, FALSE ) != 0 )
{
qDebug ( "cannot set blocking: %s", snd_strerror ( err ) );
}
// set hardware parameters
SetHWParams ( rhandle, iBufferSizeIn, iCurPeriodSizeIn );
// start record
snd_pcm_reset ( rhandle );
snd_pcm_start ( rhandle );
qDebug ( "alsa init record done" );
}
bool CSound::Read ( CVector<short>& psData )
{
int ret;
// check if device must be opened or reinitialized
if ( bChangParamIn == true )
{
InitRecording();
// reset flag
bChangParamIn = false;
}
ret = snd_pcm_readi ( rhandle, &psData[0], iBufferSizeIn );
if ( ret < 0 )
{
if ( ret == -EPIPE )
{
// under-run
qDebug ( "rprepare" );
ret = snd_pcm_prepare ( rhandle );
if ( ret < 0 )
{
qDebug ( "Can't recover from underrun, prepare failed: %s", snd_strerror ( ret ) );
}
ret = snd_pcm_start ( rhandle );
if ( ret < 0 )
{
qDebug ( "Can't recover from underrun, start failed: %s", snd_strerror ( ret ) );
}
return true;
}
else if ( ret == -ESTRPIPE )
{
qDebug ( "strpipe" );
// wait until the suspend flag is released
while ( ( ret = snd_pcm_resume ( rhandle ) ) == -EAGAIN )
{
sleep ( 1 );
}
if ( ret < 0 )
{
ret = snd_pcm_prepare ( rhandle );
if ( ret < 0 )
{
qDebug ( "Can't recover from suspend, prepare failed: %s", snd_strerror ( ret ) );
}
throw CGenErr ( "CSound:Read" );
}
return true;
}
else
{
qDebug ( "CSound::Read: %s", snd_strerror ( ret ) );
throw CGenErr ( "CSound:Read" );
}
}
else
{
return false;
}
}
// Wave out ********************************************************************
void CSound::InitPlayback()
{
int err;
// if playback device was already open, close it first
if ( phandle != NULL )
{
snd_pcm_close ( phandle );
}
// playback device (either "hw:0,0" or "plughw:0,0")
if ( err = snd_pcm_open ( &phandle, "hw:0,0",
SND_PCM_STREAM_PLAYBACK, SND_PCM_NONBLOCK ) != 0 )
{
qDebug ( "open error: %s", snd_strerror ( err ) );
}
// non-blocking playback
if ( err = snd_pcm_nonblock ( phandle, TRUE ) != 0 )
{
qDebug ( "cannot set blocking: %s", snd_strerror ( err ) );
}
// set hardware parameters
SetHWParams ( phandle, iBufferSizeOut, iCurPeriodSizeOut );
// start playback
snd_pcm_start ( phandle );
qDebug ( "alsa init playback done" );
}
bool CSound::Write ( CVector<short>& psData )
{
int size = iBufferSizeOut;
int start = 0;
int ret;
// check if device must be opened or reinitialized
if ( bChangParamOut == true )
{
InitPlayback();
// reset flag
bChangParamOut = false;
}
while ( size )
{
ret = snd_pcm_writei ( phandle, &psData[start], size );
if ( ret < 0 )
{
if ( ret == -EPIPE )
{
// under-run
qDebug ( "wunderrun" );
ret = snd_pcm_prepare ( phandle );
if ( ret < 0 )
{
qDebug ( "Can't recover from underrun, prepare failed: %s", snd_strerror ( ret ) );
}
continue;
}
else if ( ret == -EAGAIN )
{
if ( ( ret = snd_pcm_wait ( phandle, 1000 ) ) < 0 )
{
qDebug ( "poll failed (%s)", snd_strerror ( ret ) );
break;
}
continue;
}
else if ( ret == -ESTRPIPE )
{
qDebug ( "wstrpipe" );
// wait until the suspend flag is released
while ( ( ret = snd_pcm_resume ( phandle ) ) == -EAGAIN )
{
sleep ( 1 );
}
if ( ret < 0 )
{
ret = snd_pcm_prepare ( phandle );
if ( ret < 0 )
{
qDebug ( "Can't recover from suspend, prepare failed: %s", snd_strerror ( ret ) );
}
}
continue;
}
else
{
qDebug ( "Write error: %s", snd_strerror ( ret ) );
}
break; // skip one period
}
if ( ret > 0 )
{
size -= ret;
start += ret;
}
}
return false;
}
// Common ***********************************************************************
bool CSound::SetHWParams ( snd_pcm_t* handle, const int iDesiredBufferSize,
const int iNumPeriodBlocks )
{
int err;
snd_pcm_hw_params_t* hwparams;
// allocate an invalid snd_pcm_hw_params_t using standard malloc
if ( err = snd_pcm_hw_params_malloc ( &hwparams ) < 0 )
{
qDebug ( "cannot allocate hardware parameter structure (%s)\n", snd_strerror ( err ) );
return true;
}
// fill params with a full configuration space for a PCM
if ( err = snd_pcm_hw_params_any ( handle, hwparams ) < 0 )
{
qDebug ( "cannot initialize hardware parameter structure (%s)\n", snd_strerror ( err ) );
return true;
}
// restrict a configuration space to contain only one access type:
// set the interleaved read/write format
if ( err = snd_pcm_hw_params_set_access ( handle, hwparams, SND_PCM_ACCESS_RW_INTERLEAVED ) < 0 )
{
qDebug ( "Access type not available : %s", snd_strerror ( err ) );
return true;
}
// restrict a configuration space to contain only one format:
// set the sample format PCM, 16 bit
if ( err = snd_pcm_hw_params_set_format ( handle, hwparams, SND_PCM_FORMAT_S16 ) < 0 )
{
qDebug ( "Sample format not available : %s", snd_strerror ( err ) );
return true;
}
// restrict a configuration space to contain only one channels count:
// set the count of channels (usually stereo, 2 channels)
if ( err = snd_pcm_hw_params_set_channels ( handle, hwparams, NUM_IN_OUT_CHANNELS ) < 0 )
{
qDebug ( "Channels count (%i) not available s: %s", NUM_IN_OUT_CHANNELS, snd_strerror ( err ) );
return true;
}
// restrict a configuration space to have rate nearest to a target:
// set the sample-rate
unsigned int rrate = SND_CRD_SAMPLE_RATE;
if ( err = snd_pcm_hw_params_set_rate_near ( handle, hwparams, &rrate, 0 ) < 0 )
{
qDebug ( "Rate %iHz not available : %s", rrate, snd_strerror ( err ) );
return true;
}
if ( rrate != SND_CRD_SAMPLE_RATE ) // check if rate is possible
{
qDebug ( "Rate doesn't match (requested %iHz, get %iHz)", rrate, err );
return true;
}
// set the period size
snd_pcm_uframes_t PeriodSize = iDesiredBufferSize;
if ( err = snd_pcm_hw_params_set_period_size_near ( handle, hwparams, &PeriodSize, 0 ) < 0 )
{
qDebug ( "cannot set period size (%s)\n", snd_strerror ( err ) );
return true;
}
// set the buffer size and period size
snd_pcm_uframes_t BufferFrames = iDesiredBufferSize * iNumPeriodBlocks;
if ( err = snd_pcm_hw_params_set_buffer_size_near ( handle, hwparams, &BufferFrames ) < 0 )
{
qDebug ( "cannot set buffer size (%s)\n", snd_strerror ( err ) );
return true;
}
// check period and buffer size
snd_pcm_uframes_t period_size;
err = snd_pcm_hw_params_get_period_size ( hwparams, &period_size, 0 );
if ( err < 0 )
{
qDebug ( "Unable to get period size: %s\n", snd_strerror ( err ) );
}
qDebug ( "frame size: %d (desired: %d)", (int) period_size, iDesiredBufferSize );
snd_pcm_uframes_t buffer_size;
if ( err = snd_pcm_hw_params_get_buffer_size(hwparams, &buffer_size ) < 0 )
{
qDebug ( "Unable to get buffer size: %s\n", snd_strerror ( err ) );
}
qDebug ( "buffer size: %d (desired: %d)", (int) buffer_size, iDesiredBufferSize * iNumPeriodBlocks );
// write the parameters to device
if ( err = snd_pcm_hw_params ( handle, hwparams ) < 0 )
{
qDebug("Unable to set hw params : %s", snd_strerror(err));
return true;
}
// clean-up
snd_pcm_hw_params_free ( hwparams );
return false;
}
void CSound::Close()
{
// read
if ( rhandle != NULL )
{
snd_pcm_close ( rhandle );
}
rhandle = NULL;
// playback
if ( phandle != NULL )
{
snd_pcm_close ( phandle );
}
phandle = NULL;
}
#endif /* WITH_SOUND */