From e2d46b5e48531622718f505cb94a3a07637d836c Mon Sep 17 00:00:00 2001 From: ignotus Date: Thu, 21 May 2020 15:21:44 +0200 Subject: [PATCH] Update clientsettingsdlg.cpp --- src/clientsettingsdlg.cpp | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/src/clientsettingsdlg.cpp b/src/clientsettingsdlg.cpp index 81af8ef6..c8957138 100755 --- a/src/clientsettingsdlg.cpp +++ b/src/clientsettingsdlg.cpp @@ -41,8 +41,8 @@ CClientSettingsDlg::CClientSettingsDlg ( CClient* pNCliP, QWidget* parent, "(the longer the buffer, the higher the delay)." ) + "
" + tr ( "The jitter buffer size can be manually chosen for the local client " "and the remote server. For the local jitter buffer, dropouts in the " - "audio stream are indicated by the light on the bottom " - "of the jitter buffer size faders. If the light turns to red, a buffer " + "audio stream are indicated by the light below the" + "jitter buffer size faders. If the light turns to red, a buffer " "overrun/underrun took place and the audio stream is interrupted." ) + "
" + tr ( "The jitter buffer setting is therefore a trade-off between audio " "quality and overall delay." ) + "
" + tr ( @@ -61,7 +61,7 @@ CClientSettingsDlg::CClientSettingsDlg ( CClient* pNCliP, QWidget* parent, "functionality and to lower the jitter buffer size manually by " "using the sliders until your personal acceptable limit of the amount " "of dropouts is reached. The LED indicator will visualize the audio " - "dropouts of the local jitter buffer by a red light." ) + + "dropouts of the local jitter buffer with a red light." ) + TOOLTIP_COM_END_TEXT; lblNetBuf->setWhatsThis ( strJitterBufferSize ); @@ -93,7 +93,7 @@ CClientSettingsDlg::CClientSettingsDlg ( CClient* pNCliP, QWidget* parent, #ifdef _WIN32 // set Windows specific tool tip - cbxSoundcard->setToolTip ( tr ( "In case the ASIO4ALL driver is used, " + cbxSoundcard->setToolTip ( tr ( "If the ASIO4ALL driver is used, " "please note that this driver usually introduces approx. 10-30 ms of " "additional audio delay. Using a sound card with a native ASIO driver " "is therefore recommended." ) + "
" + tr ( "If you are using the kX ASIO " @@ -126,7 +126,7 @@ CClientSettingsDlg::CClientSettingsDlg ( CClient* pNCliP, QWidget* parent, "If enabled, the support for very small network audio packets is activated. Very small " "network packets are only actually used if the sound card buffer delay is smaller than " ) + QString().setNum ( DOUBLE_SYSTEM_FRAME_SIZE_SAMPLES ) + tr ( " samples. The " - "smaller the network buffers, the smaller the audio latency. But at the same time " + "smaller the network buffers, the lower the audio latency. But at the same time " "the network load increases and the probability of audio dropouts also increases." ) ); chbEnableOPUS64->setAccessibleName ( tr ( "Enable small network buffers check box" ) ); @@ -138,14 +138,14 @@ CClientSettingsDlg::CClientSettingsDlg ( CClient* pNCliP, QWidget* parent, "connection properties." ) + "
" + tr ( "Three buffer sizes are supported" ) + ":" + tr ( - "Some sound card driver do not allow the buffer delay to be changed " + "Some sound card drivers do not allow the buffer delay to be changed " "from within the " ) + APP_NAME + tr ( " software. In this case the buffer delay setting " "is disabled. To change the actual buffer delay, this " @@ -158,7 +158,7 @@ CClientSettingsDlg::CClientSettingsDlg ( CClient* pNCliP, QWidget* parent, "performance." ) + "
" + tr ( "The actual buffer delay has influence on the connection status, the " "current upload rate and the overall delay. The lower the buffer size, " - "the higher the probability of red light in the status indicator (drop " + "the higher the probability of a red light in the status indicator (drop " "outs) and the higher the upload rate and the lower the overall " "delay." ) + "
" + tr ( "The buffer setting is therefore a trade-off between audio " @@ -200,10 +200,10 @@ CClientSettingsDlg::CClientSettingsDlg ( CClient* pNCliP, QWidget* parent, QString strAudioChannels = "" + tr ( "Audio Channels" ) + ": " + tr ( "Select the number of audio channels to be used. There are three " "modes available. The mono and stereo modes use one and two " - "audio channels respectively. In the mono-in/stereo-out mode " + "audio channels respectively. In mono-in/stereo-out mode " "the audio signal which is sent to the server is mono but the " - "return signal is stereo. This is useful for the case that the " - "sound card puts the instrument on one input channel and the " + "return signal is stereo. This is useful if the " + "sound card has the instrument on one input channel and the " "microphone on the other channel. In that case the two input signals " "can be mixed to one mono channel but the server mix can be heard in " "stereo." ) + "
" + tr ( @@ -259,7 +259,7 @@ CClientSettingsDlg::CClientSettingsDlg ( CClient* pNCliP, QWidget* parent, // current connection status parameter QString strConnStats = "" + tr ( "Current Connection Status " "Parameter" ) + ": " + tr ( "The ping time is the time required for the audio " - "stream to travel from the client to the server and backwards. This " + "stream to travel from the client to the server and back again. This " "delay is introduced by the network. This delay should be as low as " "20-30 ms. If this delay is higher (e.g., 50-60 ms), your distance to " "the server is too large or your internet connection is not "