If the user has enabled the XDG user directories module then we can
use the XDG music directory in the MPD module. Otherwise we'll leave
the option undefined so that the user is forced to define the
directory to use.
This applies to state version 22.11 and above.
Fixes#3225
The GNU Privacy Guard 2.3 man page for `gpg-agent` describes the
`--grab` and `--no-grab` options as follows:
> Tell the pinentry to grab the keyboard and mouse. This option should
> be used on X-Servers to avoid X-sniffing attacks. Any use of the
> option --grab overrides an used option --no-grab. The default is
> --no-grab.
Therefore Home Manager should explicitly output `grab` when
`cfg.grabKeyboardAndMouse` is true. Previously Home Manager emitted
`no-grab` when `cfg.grabKeyboardAndMouse` was false.
PR #3192
The `services.picom.opacityRule` option was renamed to
`services.picom.opacityRules`.
This was missed in #2939
Signed-off-by: Sumner Evans <me@sumnerevans.com>
swayidle executes commands using "sh -c" and so its PATH must contain
a shell. This adds such PATH entry to the environment of the systemd
service.
Fixes#2811.
This brings a few advantages:
- Use of float instead of strings to represent float values,
- Use of structure settings, and
- Better type checking for some settings
Also add thiagokokada as codeowner of picom.
Adds option settings, which writes settings to
.config/udiskie/config.yml.
Note, the option takes precedence against other options like notify,
automount or tray if they are configured in settings.program_options.
Add services.emacs.startWithUserSession boolean to indicate that Emacs
must be started with the systemd user session. This is true by default
unless socket activation is also true.
In the past, the user had to choose between socket activation (to get
the Emacs service started when the user uses emacsclient) and
immediate start with the user session. When choosing immediate start
over socket activation and if the Emacs service is stopped at some
point, using emacsclient would start a new Emacs daemon but the
service would still be turned off. This situation would prevent
`home-manager switch` from completing successfully because it wouldn't
be able to start the Emacs service as Emacs is already running.
This new setting makes it possible to have both socket activation and
immediate start at the same time. In this scenario, Emacs is started
with the user session and, after the Emacs service is stopped, using
emacsclient starts the service again.
This new settings also makes it possible to have neither socket
activation nor immediate start.
The `getmail` package will soon be removed from nixpkgs. The
`nixos-unstable` channel already has it removed and using the service
will result in:
error: getmail has been removed from nixpkgs, migrate to getmail6
Upgrade to the getmail6 package which is already available and backwards
compatible.
This is adapted from the `services.mopidy` NixOS module. The
difference is the setting can be configured with Nix language, taking
advantage of generators from nixpkgs. The module is also suited more
for user-specific configuration, removing the `extraConfigFiles` and
`dataDir` option.
In esoteric setups, automatically setting GPG_TTY to current tty is not
desired on every shell startup. This change adds configuration options
to allow user to disable that if desired.
Without this the journal will be filled by
xscreensaver[468297]: sh: line 1: xscreensaver-command: command not found
xscreensaver-systemd: 12:29:22: exec: "xscreensaver-command -quiet -deactivate" exited with status 127
Constrain the pgrep command to only return results for the current user.
Additionally, quote the socket variables to prevent splitting.
Previously, if multiple users on a system were running `sway`, the
`pgrep` used in finding `swaySocket` would return multiple results. As a
result, reloads of sway would fail.
Fixes#2912.
Removed by upstream since commit:
bcbc410c92
This commit is included since v9 release:
https://github.com/yshui/picom/releases/tag/v9https://github.com/yshui/picom/releases/tag/v9-rc1 (the actual changelog)
While this doesn't break the config per see, it results in the
following warning in the logs:
[ DD/MM/YYYY HH:MM:SS.mmm parse_config_libconfig WARN ] The
refresh-rate option has been deprecated. Please remove it from
your configuration file. If you encounter any problems without
this feature, please feel free to open a bug report
Beside the above change we also remove an old workaround and also
write the configuration file to a well-known location in the user's
home directory.
This would give the error "attempt to call something which is not a
function but a list" given that `optionals a b` returns a list. `indent`
is the one taking this empty set as second argument.
If set to true, desktops configured in `monitors` will be reset every time
the config is run.
If set to false, desktops will only be configured the first time the config is run.
This is useful if you want to dynamically add desktops and you don't want them
to be destroyed if you re-run `bspwmrc`.
When an hook is defined, a side effect was the creation of the
${notmuchIni.database.path}/.notmuch/ directory by home-manager. If
the Xapian database does not exist yet but this .notmuch directory
exists, Notmuch is confused and throws an error when `notmuch new` is
run (while this should create the database the first time).
This commit changes the hooks paths to $XDG_CONFIG_HOME where Notmuch
expects them (see notmuch-config(1)) instead of inside the maildir
database directory.
It also moves the configuration where Notmuch expects it, but the
$NOTMUCH_CONFIG environment variable is kept for backward
compatibility.
Swayidle is an idle management daemon for Wayland. This modules adds support for
running swayidle as a SystemD user unit and makes it configurable through
home-manager.
Currently, dot directories and XDG base directories are used
inconsistently in the Home Manager option declarations. This creates
ambiguity for the user as to where the location of the file should be
albeit this is rarely encountered in practice as it is sufficient to
read upstream documentation. The rationale is to make declarations
consistent and make a clear distinction between hardcoded and modular
specifications.
References to ~/.config in relevant nixpkgs modules were untouched as
the location is hardcoded upstream[1]. Furthermore, modules of
programs which do not follow XDG specifications were also untouched.
Generalization of tilde(~) expansions to $HOME were also considered,
however there isn't sufficient rationale despite the use of $HOME
being more universal. The expansion is standardized in POSIX[2] and is
essentially portable across all shells, thus there is no pragmatic
value to introducing the change.
[1] https://github.com/nixos/nixpkgs/blob/master/pkgs/top-level/impure.nix
[2] https://pubs.opengroup.org/onlinepubs/009695399/utilities/xcu_chap02.html#tag_02_06_01
Swaynag is a replacement of i3-nag for sway. Swaynag is embedded in
Sway's build process albeit it is not an integral part of Sway,
therefore it has been added under `wayland.windowManager.sway` instead
of `programs`. It can be moved at a later time if necessary.
Two unit tests were added validate the module behavior for an empty
configuration and the example configuration.
Rationale:
As of release 1.1.2[1], the configuration ini file supports
declaration of the `[main]` header as an alternative to global
properties by enumerating all sections and mapping each to the
respective parsing function. Global properties will still be parsed
correctly by fnott however generation adds unnecessary complexity to
the module. This commit removes the need for global properties
generation.
Changes:
- Fixed the FIXME at L118.
- Cleaned up unneeded let bindings.
- Changed the generation method to use the `pkgs.formats.ini` from
pkgs-lib instead of the raw `generators` library. This was done for
consistency and clarity as the `pkgs.formats.ini` is still required
for type declaration and uses `generators` internally.
- Removed `global-properties` testcase.
- Updated `example-settings` testcase.
[1] - https://codeberg.org/dnkl/fnott/releases/tag/1.1.2
* screen-locker: Make xautolock optional, reorganize options
xautolock isn't really needed to trigger xss-lock on the basis of time
since the built-in screensaver functionality of X serves as one of the
event sources for xss-lock. Keeping it around and defaulting to
"enabled" to avoid unexpected breakage.
Also shuffled around the options to submodules for xss-lock and
xautolock to get rid of prefixes in option names and to make
enableDetectSleep a bit clearer.
* screen-locker: update maintainership
* tests/screen-locker: Stub i3lock and xss-lock
* screen-locker: add package options for xss-lock and xautolock
kanshi configurations can have more than one exec statement in a
profile. This change allows services.kanshi.profiles.<name>.exec to be
a list of strings rather than a single string.
Specifically, instead of
services.dbus.packages = with pkgs; [ gnome.dconf ];
we now recommend
programs.dconf.enable = true;
which does the same and more.
Make `gpgconf` only perform an import from derivation when the GPG
`homedir` is set to a non-default value, which probably isn't the case
for most users.
