Previously, IMAP was preferred over notmuch, even if notmuch was
configured, causing problems with setting account flavor (which
automatically sets IMAP settings). The new backend order is:
notmuch > IMAP > maildir
This also fixes the notmuch DB path being set to the wrong location.
The notmuch DB is located at the maildir base path, not in each
account's maildir.
* imapnotify: expose package (and exe) options
There are multiple packages that provide an imapnotify interface. Those
packages have differently named executables. This can now be customized.
This change also means test configurations can use stub packages.
* imapnotify: use/create config in configHome
Exposing the configuration file makes testing imapnotify configurations much
easier. It also allows for golden tests in home-manager.
* imapnotify: extend with launchd agent
Now that home-manager supports launchd agents, the imapnotify service
can be configured (and enabled) for darwin. The configuration matches
that of the linux/systemd version. In particular, by not setting a
`UserName`, this runs as the user whose configuration includes the
module.
Due to the launchd `Program` implementation (it must take an absolute
path) it is not possible to use that for the program and stub the path
in tests. Instead, this uses `ProgramArguments` for the program name.
The `ThrottleInterval` is equivalent to `RestartSec`. `KeepAlive` is
equivalent to `Restart`.
The `ExitTimeOut` default is 20 seconds, but goimapnotify should not
time out — this is achieved by setting the `ExitTimeout` to 0.
* imapnotify: add launchd plist test
This only tests the generated plist (which is new), not the original
systemd implementation, nor the json config file.
(Note the lack of a newline at the end of the plist file.)
We can't test for the whole contents of the config file because that is
out of our control and may change unexpectedly. Only check for the
settings we know should be set.
Starship has an advanced, experimental feature where fancy stuff in the
prompt can be replaced with something more simple after the command is
ran. This is very helpful for copy and pasting shell history somewhere
else.
docs: https://starship.rs/advanced-config/#transientprompt-and-transientrightprompt-in-fish
Fish is currently the only shell as far as I can tell that both
home-manager and starship support for this feature. Since the function
has to be called after starship is loaded, this seems like the best
place to put it.
format
* aerc: add space after definitions
* aerc: only generate files, if options were set
* aerc: improve file permission warning
* aerc: remove redundant access to builtins
* aerc: allow overwriting of derived values
the order of merging the config subsets did not allow the user to specify
outgoing, source and password command values,
if they were previously derived from the SMTP, IMAP, Maildir etc config.
The values from `account.<name>.extraAccounts` now have the highest precedence.
Appropriate tests were added as well.
* aerc: write primary account first
* boxxy: add module
* boxxy: added nikp123 to maintainers list
* boxxy: use mkPackageOption instead for the package
Co-authored-by: Naïm Favier <n@monade.li>
* boxxy: use yaml generator instead of json
Co-authored-by: Naïm Favier <n@monade.li>
* boxxy: various fixes
* boxxy: various fixes (part 2)
* boxxy: various fixes (part 3)
* boxxy: various fixes (part 4)
forgot to run ./format, whoops
* boxxy: use literalExpression for the rewrite example
Co-authored-by: Naïm Favier <n@monade.li>
* boxxy: add news entry
---------
Co-authored-by: Naïm Favier <n@monade.li>
Setting `outputSpecified` prevents `getOutput` from descending into
outputs, which don't have an overridden `outPath`.
Additionally, use `__spliced` to permit derivations to use the dummy as
an input.
Make use of the recently added nullable `mkPackageOption` feature
to disable installing an SSH client by default: most people should use
the client provided by their system.
Kitty provides integrations for bash, fish and zsh. The new
programs.kitty.shellIntegration options allow the configuration of
these integrations.
See <https://sw.kovidgoyal.net/kitty/shell-integration> for more details.
Signed-off-by: Sefa Eyeoglu <contact@scrumplex.net>
* zellij: adds options to integrate with zsh, bash and fish shells
* zellij: add tests for shell integration options
* zellij: eval setup auto start for fish integration
* zellij: use interactiveShellInit for fish integration
* zellij: fixes format issues
* zellij: enable shell integrations by default
* zellij: compresses shell integration test cases
* zellij: removes the disabled shell integration tests
* zellij: formats tests
* himalaya: add soywod to maintainers
* himalaya: make the config safer
Also added two services and more tests.
* himalaya: fix doc + typos
* himalaya: use freeform
* himalaya: run ./format
* himalaya: make use of mkPackageOption
It's pretty common to need multiple bindings to
history-substring-search, since different terminals will send different
keys for up/down.
This does not break back-compatibility, and introduces a new test
The current zplug nixpkgs puts everything under `$out/`. It pollutes the nix
profile dir.
This is a breaking change. It depends on an change of the output path in the
nixpkgs zplug package.
Virtual mailboxes (described by Notmuch queries) can now configured for each account in NeoMutt.
Plus, it is possible to disable Notmuch section for a specific account.
The added extraConfig option allowes users to insert custom text at
the end of the generated profile `user.js` file. This allows the users
to import templates as part of their configuration.
* i3status-rust: update it to handle 0.30.x releases
0.30.0 is a major release that brings many breaking changes to the
configuration file. See:
https://github.com/greshake/i3status-rust/blob/master/NEWS.md#i3status-rust-0300
The only one that actually affects the module though is the change in
how the theme/icons are defined. Other changes are mostly on how to
specify formatting/blocks, and since we just generate the TOML as-is, it
needs changes in the user side.
So most changes in this commit are documentation updates, having
up-to-date examples from things that changed, e.g.: the new `click`
attribute that now can be applied to any block.
* i3status-rust: only use new format if i3status-rust >= 0.30.0
* news: document the i3status-rust changes
* i3status-rust: add thiagokokada as maintainer
This command adds the ability to specify lists of qutebrowser
commands as values for key bindings, which avoids the need for
concatenating commands with ` ;; `.
Firefox internally only supports bool, int, and string types for
preferences, but often stores objects, arrays and floats as strings.
This change makes it nicer to specify those type of preferences in
Nix, and it also makes it possible to merge objects & arrays across
multiple modules.
The default value of `programs.ncmpcpp.mpdMusicDir` is taken from
`services.mpd.musicDirectory` if the mpd module is enabled, which has
type `either path str`. `programs.ncmpcpp.mpdMusicDir` did not accept
`str` values, though, so an error was raised when the default value was
used and `services.mpd.musicDirectory` was set to a value of type `str`.
This commit changes the type of `programs.ncmpcpp.mpdMusicDir` to also
accept `str` to reflect the type of `services.mpd.musicDirectory`.
Fixes#3560
Assigning to `programs.neovim.extraLuaPackages` a function taking a lua package set as input
and returning a list of packages, as described in the documentation,
threw an error because the rest of the code assumed that the value was always a plain list.
Using `lib.types.coercedTo`, we can accept such functions, as per the documentation,
as well as plain lists, which we then convert to a function ignoring its input argument.
We print a warning when a plain list is assigned, since the function
form is preferred, as it ensures that the right lua package set is used.
For the lua packages, we also get the lua package set from the
finalPackage, to make sure that we are always using the same package set
as the actual unwrapped neovim package being built.
For `programs.neovim.extraPythonPackages` I did the same.
I updated the test case so that we test both ways of setting these options.
This enables nushell integration by default for direnv, similar to
bash/zsh/fish. The slightly verbose way of setting this is to ensure
that peoples' existing nushell configuration isn't overwritten, only
appended to, as would be the case if we just used the integration
example from the nushell docs:
https://www.nushell.sh/cookbook/direnv.htmlCloses#3520
Previously the nushell module did not differentiate between Linux and
Darwin when deciding where to place config files, whereas nushell
does. This commit fixes that.
The previous version linked the file into home, then sourced that. Since
nothing else expects that file to be there, this is unnecessary.
Additionally, doing so made it impossible to test a built config without
switching, e.g. using `XDG_CONFIG_HOME=… nvim` or `nvim -u`. This
remedies that, at least for this particular reference.
To test this, change from asserting contents of the config file to
actually starting nvim, outputting sentinel values, and then asserting
their values are present. This way it’s tested that nvim loaded the
config, rather than that some config is in a specific place.
This is all in one commit as the test, as written now, would not have
worked before since the previously hard-coded home path was not an
actual file in the test environment.
* ssh: add generic Match support for matchBlocks
Introduce conservative support for actual `Match`
blocks in ssh config.
"Conservative" means this PR doesn'tt try to process
the `match` expression and simply uses it as a string
provided by the user.
If set, `match` has precedence over `host` meaning
if both are set, `match` is used and `host` is ignored.
* Add news entry
* flake: Expose tests to allow running purely
The existing way to run tests with `nix-shell` relies on impure usage of
`<nixpkgs>`. This can lead to failures when the local nixpkgs is
incompatible with the locked one. I.e., where CI is passing but a
contributor may experience a failure.
So, expose tests as `devShells.tests` to use the locked nixpkgs and
allow easy invocation via `nix develop`.
* tests: Remove impure path
With Nix 2.10+ and pure evaluation mode e.g.
```
nix run nixpkgs/nixos-unstable#nixVersions.nix_2_10 -- develop -i .#tests.zplug-modules
```
this test would fail with:
> error: the path '~/.customZplugHome' can not be resolved in pure mode
Since the test only cares that it is a path, rather than anything about
its contents, use a dummy empty directory.
Add a new Thunderbird module that uses the configuration in
`accounts.email.accounts` to setup SMTP and IMAP accounts.
Multiple profiles are not supported at this point.
Update notification popups are annoying when vscode/vscodium is
managed by Home Manager. However, as these settings also require the
configuration to be managed via `userSettings`, they are disabled by
default.
With this change, it's now possible to configure the default search
engine in Firefox with
programs.firefox.profiles.<name>.search.default
and add custom engines with
programs.firefox.profiles.<name>.search.engines.
It's also recommended to enable
programs.firefox.profiles.<name>.search.force = true
since Firefox will replace the symlink for the search configuration on
every launch, but note that you'll loose any existing configuration by
enabling this.
This will cache the output of `passwordCommand` per authentication
realm.
Context: the `credentials` key in `sbt` is a `TaskKey[Seq[Credentials]]`.
In `sbt`, tasks are evaluated on-demand and their output is not cached.
This particular key is referenced by all submodules in a project. When
the command is relatively expensive (e.g.: `pass show foo`), this
results in several seconds of delay when doing basic things like
`compile` or `test` which makes this unusable without some kind of
caching.
sbt allows overriding the default repositories to use to resolve
dependencies. This is often used with proxies and/or private
repositories to host internal packages.
This change adds a `repositories` attribute to `sbt` to allow
specifying the values that will go in `~/.sbt/repositories` file.
To support the above change we also deprecate the `baseConfigPath`
option in favour of `baseUserConfigPath` which points one level higher
by default. This allows not using relative paths to refer to the
top-level configuration directory.
Also adds tests for the new option and the deprecation of the previous
one.
At commit [5666e6b9](5666e6b9fb),
broot refactored the content of the file `/resources/default-conf.hjson`
into multiple files under the directory `/resources/default-conf`, using
[`imports`](5666e6b9fb/resources/default-conf/conf.hjson (L152-L165))
to refer to other configurations.
This refactoring is effective since version 1.14.0 of broot.
After this refactoring, in `xdg.configFile.broot` (which defaults to
`~/.config/broot`):
- we need to copy all potentially referenced files (all files under
`resources/default-conf`),
- except we need to leave out `conf.hjson` which conflicts with the
`conf.toml` generated by home-manager (because broot [accepts both conf.toml and conf.hjson](https://dystroy.org/broot/conf_file/))
To implement this, we use `symlinkJoin` to create the content of
`xdg.configFile.broot` by merging multiple sources.
* broot: use freeformType for config
* broot: use defaults from upstream
closes#2395
* broot: generate shell function
* broot: add @dermetfan to CODEOWNERS
* broot: rename `config` option to `settings`
* broot: make example more idiomatic
Co-authored-by: Nicolas Berbiche <nic.berbiche@gmail.com>
Co-authored-by: Nicolas Berbiche <nic.berbiche@gmail.com>
We change the current logic: instead of writing an init.vim which loads
lua/init-home-manager.lua, we write an init.lua that sources init.vim
This commit also avoids writing any of these files if the plugins have
no config.
Some configuration options can take space separated strings; for
example `SSLVersions` can be configured with multiple allowed
versions.
SSLVersions TLSv1.3 TLSv1.2
This can now be represented in Home Manager.
SSLVersions = [ “TLSv1.3” “TLSv1.2” ];
In implementing this change, it uses oneOf for config type, as it is a
cleaner way to represent the union than the nested eithers
formulation.
Also add SSLVersions to test lists of strings in
`account.extraConfig`.
The `tag.gpgSign` config option was added in Git 2.23.0 and seems like
it should be set in addition to `commit.gpgSign` when
`programs.git.signing.signByDefault` is enabled
This adds support for configuring email accounts, with automatic smtp, imap,
sendmail (msmpt) and maildir (mbsync, offlineimap) setup in aerc,
via `accounts.email`.
mujmap is a tool that synchronizes mail between a mail server and
notmuch via JMAP. It's very similar to lieer, so I heavily based the
implementation of the notmuch module on lieer's. I did not include an
equivalent to lieer's periodic synchronization service, however,
because I plan to soon introduce a daemon mode to mujmap.
https://github.com/elizagamedev/mujmap
M_SHARE is not a valid column on Darwin. It seems that previously htop
ignored unknown columns, but the current version does not display all
subsequent columns.
Neomutt will run the given command (which can be a string or a path)
and take the output from stdout and use it as the signature for your
email.
Co-authored-by: Nicolas Berbiche <nicolas@normie.dev>
