* xdg-mime: allow overrides to shared-mime-info and desktop-file-utils
The `xdg-mime` module now exposes packages to determine what will be run
for update-mime-database and update-desktop-database. This allows users
to select a different version of these packages if the are incompatible.
This should, in combination with an override to the version of
`shared-mime-info` (can be found here notalltim/home-manager-config#4),
resolve#4955, #5102, #4682, and possibly #4941. The problem seems to stem
from a mismatch in the version of `shared-mime-info` with the host.
I also switched from using `buildPackages` to `pkgs` to improve
cross-compilation compatibility.
* xdg-mime: Add tests for xdg-mime module
The xdg-mime module was missing tests so I added basic test for all the
options and checked the basic behavior. It covers ensuring that the
proper files/folders are created and that the package overrides work.
* nix: add options 'nixPath' and 'keepOldNixPath'
By default, the system value for $NIX_PATH is kept as a fallback.
To completely override the system value for $NIX_PATH:
nix.keepOldNixPath = false;
* nix: add more tests
* nix: add a declarative alternative to Nix channels
This adds a new option, 'nix.channels'. It's the Nix channels equivalent
of the 'nix.registry' option, and compatible with pre-Flake Nix tooling
including nix-env and nix-shell. Like 'nix.registry', this option is
useful for pinning Nix channels.
Channels defined in the new option can coexist with channels introduced
through the nix-channel command. If the same channel exists in both, the
one from Home Manager will be prioritized.
* nix: add news entry
* nix: make channels respect use-xdg-base-directories
* nix: remove 'with lib;'
---------
Co-authored-by: Michael Hoang <enzime@users.noreply.github.com>
Nixpkgs has recently made a few major changes to its
xdg-desktop-portal package, which silently breaks our module here:
- The NIXOS_XDG_DESKTOP_PORTAL_CONFIG_DIR variable patch has been
removed (in favor of putting portal configurations in /etc or
XDG_CONFIG_HOME).
- A new variable, NIX_XDG_DESKTOP_PORTAL_DIR, was introduced in a
patch to avoid setting XDG_DESKTOP_PORTAL_DIR (which also affected
portal configuration reading, not only portal definitions)
I updated our module to match the changes, but this breakage also made
me revisit this module and look into some improvements.
Long story short, I think it's worth it to make it more similar to the
NixOS one, as it will make behavior more predictable and consistent.
The main change is relying on the upstream linked systemd
unit (instead of using systemd.user.services), and setting the
environment variables globally instead of scoping it to the unit, as
it's a very global thing anyway.
The release notes used to be an appendix in the manual. After
converting to markdown that appendix got lost. This commit
reintroduces the release notes into the manual.
The `nixos-render-docs` tool outputs XHTML formatted content. In
order to convince browsers like `firefox` to treat the data as XHTML
the extension must be `.xhtml` and not `.html`.
Using the XHTML-formatted content as HTML is mainly an issue with
self-closing `<a />` tags.
This will reduce the system closure size by about 200MB under NixOS by
sharing the glibcLocales package.
When home-manager is installed on Linux without the NixOS module, all
glibc locales are installed, as before.
Resolves: #2333
Previously, this module was all-or-nothing with its pre-defined user
dirs. This allows e.g. `xdg.userDirs.desktop = null;` to opt-out of
some configuration while still benefiting from the rest.
This module adds basic support for configuration specializations.
These allow the user to build multiple alternative configurations that
should be part of the same generation.
The conversion from `concatMapStrings` to `concatStringsSep` introduced in https://github.com/nix-community/home-manager/pull/2481
creates an unintended behavior change where the formatted config does not end in a newline.[1]
This is problematic for manipulation at the Nix level. In particular, this cause a regression in
the generation of gtk2 settings due to concatenated of the formatted config and `gtk2.extraConfig`
without a newline in between.
This commit restores `concatMapStrings` to match the previous behavior and adds a newline to
the final string for the generated gtk2 config. The test case for gtk2-basic-config
was also updated to check behavior at concatenation boundaries.
[1] - https://github.com/nix-community/home-manager/pull/2481#discussion_r830648706
Nix permits user level configurations through ~/.config/nix/nix.conf that allow
customization of system-wide settings and behavior. This is beneficial in chroot
environments and for per-user configurations. System level Nix configurations in the
form of /etc/nix/nix.conf can be specified declaratively via the NixOS nix module but as
of currently no counter part exists in home-manager.
This PR is a port of the RFC42 implementation for the NixOS nix module[1]
to home-manager. Non-applicable options have been excluded and the config generation
backends have been tweaked to the backends offered by home-manager. A notable change
from the NixOS module is a mandatory option to specify the Nix binary corresponding
to the version "nix.conf" should be generated against. This is necessary because
the validation phase is dependent on the `nix show-config` subcommand on the host platform.
While it is possible to avoid validation entirely, the lack of type checking was deemed too significant.
In NixOs, the version information can be retrieved from the `package` option itself which
declares the Nix binary system-wide. However in home-manager, there is no pure way to
detect the system Nix version and what state version the "nix.conf" should be generated
against. Thus an option is used to overcome this limitation by forcing the user to
specify the Nix package. Note this interaction can still be automated by forwarding
the system-wide Nix package to the home-manager module if needed.
Three unit tests were added to test the module behavior for the empty settings, the example
settings and the example registry configurations respectively.
[1] - NixOS/nixpkgs#139075
* gtk: add cursor theme configuration
- Added the `cursorTheme` under the gtk module.
- Added tests for the gtk3 settings file generation, and renamed
the gtk2 unit test expected file for clarity.
- Added guard against generating a blank `gtk.css` when `cfg.extraCss`
is empty.
- Replaced `concatMapStrings` calls with `concatStringsSep`. The library function
`concatMapStrings` generates an intemediate list which is then passed to
`concatStringsSep`, As we are not performing other transformation except
the addition of newlines, a direct call to `concatStringsSep` is sufficient.
- Updated description of examples to be more general "~/.config" -> "$XDG_CONFIG_HOME".
- Update helper functions `toGtk3Ini` and `formatGtk2Option` to use the library
function `boolToString` and escape the separator in the key name.
* xcursor: delegate GTK cursor settings to gtk.cursorTheme
- Added deprecation warning for GTK settings in the `xsession.cursorTheme` module.
- Modified config section to use `gtk.cursorTheme` for GTK cursor settings.
Based on nixpkgs commit c4b3aa62608d592d8a983be685f7e82000f4de30
stringBool is not needed because makeDesktopItem handles converting boolean parameters to string,
and noDisplay and prefersNonDefaultGPU parameters have been added.
Write YubiKey token IDs in the format yubico_pam expects. See
https://developers.yubico.com/yubico-pam/ for details. Also refer to
the NixOS option security.pam.services.<name>.yubicoAuth.
Closes#2502
This option provides a more convenient way to overlay dummy packages.
It also adds a function `config.lib.test.mkStubPackage` that can,
e.g., be used for `package` options.
Currently, when a custom path is set for any of the XDG base
directories (i.e XDG_DATA_HOME, XDG_CONFIG_HOME, ...), the path will
be coerced into a string when consumed by other options such as
xdg.configFile et al. This causes the the given path to be copied to
the nix store which in the case of xdg.configFile et al, translate to
the file being written there as it is a absolute path.
Interestingly, the default base directories all work as intended as
they are encoded as a string.
This commit converts the option to a string regardless of whether it
is a primitive path or a string encoded path. This allows downstream
consumers to use the base directories in arbitrary way without
accidentally copying the content of the directory to the store. It is
implemented in a similar manner as how home.homeDirectory undergoes
string conversion.
The existing file-attr-name test was modified to test also custom xdg
base directories, and the home.file generation test was removed as
there is a dedicated test for this case in the files module. The test
case was renamed to file-gen to better reflect the new scope.
* xdg-desktop-entries: add module
rebase
* xdg-desktop-entries: adapt to changes in makeDesktopItem
This package depends on the makeDesktopItem function in nixpkgs, which recently changed its syntax:
https://github.com/NixOS/nixpkgs/pull/91790
This commit makes the module compatible with the new syntax.
It also exposes the fileValidation option in makeDesktopItem.
Co-authored-by: cwyc <cwyc@users.noreply.github.com>
Co-authored-by: --get <--show>
