These (and the `*MD` functions apart from `literalMD`) are now no-ops
in nixpkgs and serve no purpose other than to add additional noise and
potentially mislead people into thinking unmarked DocBook documentation
will still be accepted.
Note that if backporting changes including documentation to 23.05,
the `mdDoc` calls will need to be re-added.
To reproduce this commit, run:
$ NIX_PATH=nixpkgs=flake:nixpkgs/e7e69199f0372364a6106a1e735f68604f4c5a25 \
nix shell nixpkgs#coreutils \
-c find . -name '*.nix' \
-exec nix run -- github:emilazy/nix-doc-munge/98dadf1f77351c2ba5dcb709a2a171d655f15099 \
--strip {} +
$ ./format
This process was automated by [my fork of `nix-doc-munge`]. All
conversions were automatically checked to produce the same DocBook
result when converted back, modulo minor typographical/formatting
differences on the acceptable-to-desirable spectrum.
To reproduce this commit, run:
$ NIX_PATH=nixpkgs=flake:nixpkgs/e7e69199f0372364a6106a1e735f68604f4c5a25 \
nix shell nixpkgs#coreutils \
-c find . -name '*.nix' \
-exec nix run -- github:emilazy/nix-doc-munge/98dadf1f77351c2ba5dcb709a2a171d655f15099 \
{} +
$ ./format
[my fork of `nix-doc-munge`]: https://github.com/emilazy/nix-doc-munge/tree/home-manager
The NixOS variant of Markdown doesn't make a distinction between
`<code>` and `<literal>` or `<quote>` and... quotes, and doesn't
support `<parameter>` or `<replaceable>`. These are infrequently used
(apart from `<code>`) and don't add much, so just convert them to
simpler forms to allow the options containing them to be converted
to Markdown automatically.
A few minor syntactic adjustments were also made to make
`nix-doc-munge`'s job easier.
The Markdown options processor cannot handle rendering tables
to DocBook. This could be fixed, but as we won't be using the
DocBook output for long I just removed them for now in the interest
of expediency; they were all well-suited to being description lists
showing option types anyway, apart from one awkward case in the form
of trayer, which also had ad-hoc syntax for enumerating acceptable
values in the documentation. Since the types aren't actually used for
option processing anyway, I changed them to use `enum` and similar to
give a single description of the acceptable values without a big table.
`nix-doc-munge` can't handle these, which is understandable as I can
barely handle them either. There are a few infelicities here: the
current processor can't handle multiple terms to one description in
a description list so they get comma-separated in one case, and one
case that should ideally render as a `<figure>` with a `<figcaption>`
in HTML is reduced to a paragraph with some `<strong>` text. (Which, in
fairness, is how it rendered in practice with the DocBook anyway.) The
docs generator has since been updated to handle figures, but we can't
use it until moving off DocBook output.
These files all have options that trip up the `nix-doc-munge`
conversion tool for one reason or another (syntax that clashes with
Markdown, options that were already using Markdown syntax despite not
being marked that way, output that differs slightly after conversion,
syntax too elaborate to convert with some cheap regular expressions,
...). Translate them manually and do a little copyediting to options
in the vicinity while we're at it.
Output is mostly unchanged aside from some minor typographical and
formatting changes, along with better source links.
We temporarily export `options.docBookForMigration` to allow
`nix-doc-munge` to check its conversions.
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Update translation files
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Co-authored-by: Hosted Weblate <hosted@weblate.org>
Translate-URL: https://hosted.weblate.org/projects/home-manager/cli/
Translate-URL: https://hosted.weblate.org/projects/home-manager/modules/
Translation: Home Manager/Home Manager CLI
Translation: Home Manager/Home Manager Modules
This removes the hard-coded fallback Home Manager paths. Specifically
${XDG_CONFIG_HOME:-$HOME/.config}/nixpkgs/home-manager
and
"$HOME/.nixpkgs/home-manager"
Use `@HOME_MANAGER_PATH@` if it has been provided and points to
something that exists. Warn the user if it does not point to
something.
If we have not been provided with a `@HOME_MANAGER_PATH@` that exists,
then for both hard-coded paths show a warning if something exists
where the paths are pointing.
This no longer attempts to use either of the hard-coded paths as
fallback for the Home Manager path.
Prior to this change, it was impossible to nest attrsets in
accounts.email.accounts.<name>.imapnotify.extraConfig. However,
goimapnotify's configuration is JSON-based, and the recommended
configuration has:
```
"tlsOptions": {
"rejectUnauthorized": true
},
```
This change changes the type from an attrset of str/int/bool to the
JSON type provided by nixpkg's `pkgs.formats.json`.
Previously, lines in .zshrc were added with quotes in keys
(e.g. ZSH_HIGHLIGHT_STYLES['comment']='fg=#6c6c6c'). However, zsh
considered these quotes to be part of the key, so the "comment" key
remained unchanged.
* home-cursor.nix: enable gtk module when enabling gtk config generation
The gtk configurations are not generated unless config.gtk is enabled.
This is a point of confusion because config.home.pointerCursor.gtk can essentially be disabled,
despite having it enabled.
* home-cursor.nix: Add note to gtk config generation description instead of enabling gtk module
* home-cursor.nix: Add note about applying pointerCursor configs to main submodule desc
* home-cursor.nix: Change tabs to spaces
* aerc: fix per-account extraConfig section names
The aerc configuration file `aerc.conf` can contain 10 different
sections, but only the UI section supports what the aerc manual calls
contextual configuration. This works by appending to the section heading
either `:account=name` or `:folder=bar`.
The aerc-accounts module, however, applied `mkAccountConfig` to each
section heading declared in
`config.accounts.email.accounts.<name>.aerc.extraConfig.*`. This means
home-manager will generate files with `[general:account=default]` and
the options will not be recognized by aerc.
To address this, and since it doesn't make sense for other sections to
only be under a single account's scope, an assertion has been added
to confirm that only sectons that support contextual config (i.e.,
only the UI section) is declared.
This also addresses confusions like declaring
`accounts.email.accounts.*.aerc.extraConfig.general.unsafe-accounts-conf
= true` and triggering a warning message because
`programs.aerc.extraConfig.general.unsafe-accounts-conf` was unset.
This commit also updated documentation throughout the aerc modules to
be in line with this change, and fixed minor typos/formatting therein.
Co-authored-by: Genevieve <genevieve@sunlashed.garden>
* aerc: make assertion plaintext and add test case
This commit adds a test case to check both the warning on unset
`unsafe-accounts-conf = true` when aerc accounts are configured
with Nix, and the new assertion when per-account configuration
contains unsupported subsections (i.e. general).
It also fixes minor formatting issues and typos.
As pointed out in #3291, using the XDG symlink means the agent/unit
files don’t change when the contents of the config changes, and so the
service will not be restarted.
Nushell has the option to source from the login.nu file in the case
that nushell is used as a login shell. This commit adds the login file
alongside the existing config and env files as another configuration
option.
Previously, IMAP was preferred over notmuch, even if notmuch was
configured, causing problems with setting account flavor (which
automatically sets IMAP settings). The new backend order is:
notmuch > IMAP > maildir
This also fixes the notmuch DB path being set to the wrong location.
The notmuch DB is located at the maildir base path, not in each
account's maildir.
Unison supports the same option to be given several times as a command
line argument (e.g. unison -path xxx -path yyy).
This commit adds Home Manager support for this by allowing a list of
strings to be given to services.unison.pairs.<name>.commandOptions values.
# Veuillez saisir le message de validation pour vos modifications. Les lignes
* imapnotify: expose package (and exe) options
There are multiple packages that provide an imapnotify interface. Those
packages have differently named executables. This can now be customized.
This change also means test configurations can use stub packages.
* imapnotify: use/create config in configHome
Exposing the configuration file makes testing imapnotify configurations much
easier. It also allows for golden tests in home-manager.
* imapnotify: extend with launchd agent
Now that home-manager supports launchd agents, the imapnotify service
can be configured (and enabled) for darwin. The configuration matches
that of the linux/systemd version. In particular, by not setting a
`UserName`, this runs as the user whose configuration includes the
module.
Due to the launchd `Program` implementation (it must take an absolute
path) it is not possible to use that for the program and stub the path
in tests. Instead, this uses `ProgramArguments` for the program name.
The `ThrottleInterval` is equivalent to `RestartSec`. `KeepAlive` is
equivalent to `Restart`.
The `ExitTimeOut` default is 20 seconds, but goimapnotify should not
time out — this is achieved by setting the `ExitTimeout` to 0.
* imapnotify: add launchd plist test
This only tests the generated plist (which is new), not the original
systemd implementation, nor the json config file.
(Note the lack of a newline at the end of the plist file.)
This will reduce the system closure size by about 200MB under NixOS by
sharing the glibcLocales package.
When home-manager is installed on Linux without the NixOS module, all
glibc locales are installed, as before.
Resolves: #2333
