The service was never marked with a failed state with the previous
approach, which could lead broken synchronisation pair states to go
undetected.
The module now uses a timer instead of unlimited restarts, which does
not have this issue.
When using the previous approach I've always gotten errors that I can't
reload config on the .lock file that exists in /tmp when you run a
standard configured hyprland.
This commit improves this by using hyprctl to find instances to reload
instead.
We can remove the HYPRLAND_INSTANCE_SIGNATURE bogus assignment once
https://github.com/hyprwm/Hyprland/issues/4088 is resolved.
Co-authored-by: Carl Hjerpe <git@hjerpe.xyz>
Add the option sourceFirst to the hyprland module. When this option is
enabled source entries will be put near the top of the file, so that
the variables declared in other files can be used by the other
configuration entries.
Add "source" to the list of important prefixes when the former option
is enabled.
Resolves#4729
Occasionally, swayidle crashes with a failure to connect to the
Wayland session. Ideally, swayidle should automatically restart
instead of leaving the system in a vulnerable state.
When a process inside the sxhkd scope is OOM killed, if the OOM policy
is set to `stop` then the sxhkd scope itself will exit, terminating
every process launched from the keyboard.
This is undesirable, set it to `continue` instead to keep other
processes running.
For devices with more than one battery, cbatticon allows to set the
battery ID as optional positional argument. If this argument is not
given, it default to the first battery it would list with `cbatticon
-p`. This commit adds support for the batteryId option to the cbatticon
module.
Allows users to customize which environment variables to import in DBus
and SystemD user environments, and to specify which commands will be run
after the environment activation.
Fixesnix-community/home-manager#4488
The default config for sway generates a bar block with tray_output primary. But wayland (or sway, take your pick?) has no concept of a primary display so this just results in no tray anywhere.
A better default is "*" which puts the tray on every monitor, since sway can do so without issue.
Signed-off-by: Sefa Eyeoglu <contact@scrumplex.net>
Remove xwayland.hidpi option, since we're dropping HiDPI XWayland
patches support, opting to use the builtin xwayland:force_zero_scaling
option instead. It is described in more detail in
https://wiki.hyprland.org/ Configuring/XWayland.
- On darwin, creates a launch agent to run git-sync on an interval and
when the `path` changes.
- The `uri` option is not used on Darwin. The auto-creation of the
local git directory from the `uri` is a feature of the
git-sync-on-inotify [1] wrapper (which won't work on Darwin afaik)
and not `git-sync` itself.
[1] https://github.com/simonthum/git-sync/blob/master/contrib/git-sync-on-inotify
* hyprland: prioritize variables and beziers
The `settings` key now handles `$variables` and `bezier`s differently,
putting them at the top of the file.
Also, proper indentation has been implemented.
* Update modules/services/window-managers/hyprland.nix
Co-authored-by: Naïm Favier <n@monade.li>
* hyprland: add animations & beziers test
---------
Co-authored-by: Naïm Favier <n@monade.li>
These (and the `*MD` functions apart from `literalMD`) are now no-ops
in nixpkgs and serve no purpose other than to add additional noise and
potentially mislead people into thinking unmarked DocBook documentation
will still be accepted.
Note that if backporting changes including documentation to 23.05,
the `mdDoc` calls will need to be re-added.
To reproduce this commit, run:
$ NIX_PATH=nixpkgs=flake:nixpkgs/e7e69199f0372364a6106a1e735f68604f4c5a25 \
nix shell nixpkgs#coreutils \
-c find . -name '*.nix' \
-exec nix run -- github:emilazy/nix-doc-munge/98dadf1f77351c2ba5dcb709a2a171d655f15099 \
--strip {} +
$ ./format
This process was automated by [my fork of `nix-doc-munge`]. All
conversions were automatically checked to produce the same DocBook
result when converted back, modulo minor typographical/formatting
differences on the acceptable-to-desirable spectrum.
To reproduce this commit, run:
$ NIX_PATH=nixpkgs=flake:nixpkgs/e7e69199f0372364a6106a1e735f68604f4c5a25 \
nix shell nixpkgs#coreutils \
-c find . -name '*.nix' \
-exec nix run -- github:emilazy/nix-doc-munge/98dadf1f77351c2ba5dcb709a2a171d655f15099 \
{} +
$ ./format
[my fork of `nix-doc-munge`]: https://github.com/emilazy/nix-doc-munge/tree/home-manager
The NixOS variant of Markdown doesn't make a distinction between
`<code>` and `<literal>` or `<quote>` and... quotes, and doesn't
support `<parameter>` or `<replaceable>`. These are infrequently used
(apart from `<code>`) and don't add much, so just convert them to
simpler forms to allow the options containing them to be converted
to Markdown automatically.
A few minor syntactic adjustments were also made to make
`nix-doc-munge`'s job easier.
The Markdown options processor cannot handle rendering tables
to DocBook. This could be fixed, but as we won't be using the
DocBook output for long I just removed them for now in the interest
of expediency; they were all well-suited to being description lists
showing option types anyway, apart from one awkward case in the form
of trayer, which also had ad-hoc syntax for enumerating acceptable
values in the documentation. Since the types aren't actually used for
option processing anyway, I changed them to use `enum` and similar to
give a single description of the acceptable values without a big table.
`nix-doc-munge` can't handle these, which is understandable as I can
barely handle them either. There are a few infelicities here: the
current processor can't handle multiple terms to one description in
a description list so they get comma-separated in one case, and one
case that should ideally render as a `<figure>` with a `<figcaption>`
in HTML is reduced to a paragraph with some `<strong>` text. (Which, in
fairness, is how it rendered in practice with the DocBook anyway.) The
docs generator has since been updated to handle figures, but we can't
use it until moving off DocBook output.
These files all have options that trip up the `nix-doc-munge`
conversion tool for one reason or another (syntax that clashes with
Markdown, options that were already using Markdown syntax despite not
being marked that way, output that differs slightly after conversion,
syntax too elaborate to convert with some cheap regular expressions,
...). Translate them manually and do a little copyediting to options
in the vicinity while we're at it.
Prior to this change, it was impossible to nest attrsets in
accounts.email.accounts.<name>.imapnotify.extraConfig. However,
goimapnotify's configuration is JSON-based, and the recommended
configuration has:
```
"tlsOptions": {
"rejectUnauthorized": true
},
```
This change changes the type from an attrset of str/int/bool to the
JSON type provided by nixpkg's `pkgs.formats.json`.
As pointed out in #3291, using the XDG symlink means the agent/unit
files don’t change when the contents of the config changes, and so the
service will not be restarted.
Unison supports the same option to be given several times as a command
line argument (e.g. unison -path xxx -path yyy).
This commit adds Home Manager support for this by allowing a list of
strings to be given to services.unison.pairs.<name>.commandOptions values.
# Veuillez saisir le message de validation pour vos modifications. Les lignes
* imapnotify: expose package (and exe) options
There are multiple packages that provide an imapnotify interface. Those
packages have differently named executables. This can now be customized.
This change also means test configurations can use stub packages.
* imapnotify: use/create config in configHome
Exposing the configuration file makes testing imapnotify configurations much
easier. It also allows for golden tests in home-manager.
* imapnotify: extend with launchd agent
Now that home-manager supports launchd agents, the imapnotify service
can be configured (and enabled) for darwin. The configuration matches
that of the linux/systemd version. In particular, by not setting a
`UserName`, this runs as the user whose configuration includes the
module.
Due to the launchd `Program` implementation (it must take an absolute
path) it is not possible to use that for the program and stub the path
in tests. Instead, this uses `ProgramArguments` for the program name.
The `ThrottleInterval` is equivalent to `RestartSec`. `KeepAlive` is
equivalent to `Restart`.
The `ExitTimeOut` default is 20 seconds, but goimapnotify should not
time out — this is achieved by setting the `ExitTimeout` to 0.
* imapnotify: add launchd plist test
This only tests the generated plist (which is new), not the original
systemd implementation, nor the json config file.
(Note the lack of a newline at the end of the plist file.)
PR #3747 renamed the option wayland.windowManager.sway.systemdIntegration
to wayland.windowManager.sway.systemd.enable.
This commit simply updates documentation to reference the new format.
* Add infrastructure for contacts and calendars
This also adds the modules
- programs.vdirsyncer,
- programs.khal, and
- services.vdirsyncer
that integrate with the new infrastructure.
Co-authored-by: Andrew Scott <3648487+ayyjayess@users.noreply.github.com>
Co-authored-by: Sebastian Zivota <sebastian.zivota@mailbox.org>
wip
* vdirsyncer: allow option userName, disallow userNameCommand
1. account option `userName` is now allowed by `programs.vdirsyncer`
2. The commented out account option `userNameCommand` was required to be set
by `programs.vdirsyncer` (e.g. as `null`).
It is now disallowed (commented out) by vdirsyncer.
* khal: added options 'color' and 'priority'
* Apply nixfmt
---------
Co-authored-by: Sebastian Zivota <sebastian.zivota@mailbox.org>
Co-authored-by: Johannes Rosenberger <johannes.rosenberger@jorsn.eu>
Co-authored-by: Johannes Rosenberger <johannes@jorsn.eu>
Co-authored-by: Robert Helgesson <robert@rycee.net>
* sway: add support for XDG autostart using systemd
Using the option wayland.windowManager.sway.systemd.xdgAutostart, users
can now choose to start applications present in
$XDG_CONFIG_HOME/autostart when starting their sway session.
This change also renames wayland.windowManager.sway.systemdIntegration
to wayland.windowManager.sway.systemd.enable;
Signed-off-by: Sefa Eyeoglu <contact@scrumplex.net>
* sway: add Scrumplex to maintainers
Signed-off-by: Sefa Eyeoglu <contact@scrumplex.net>
---------
Signed-off-by: Sefa Eyeoglu <contact@scrumplex.net>
* Fix espanso module to work with 2.x version
* espanso: fix espanso module
This module is currently broken. It does not create `config` and `match` folders which are required by espanso 2.x version.
This PR fixed this issue and support creating multiple files under `config` and
`match` folder.
* Espanso: fix espanso module
This module is currently broken. It does not create `config` and `match` folders which are required by espanso 2.x version.
This PR fixed this issue and support creating multiple files under `config` and `match` folder.
Add descriptions
* Add versionAtLeast and mkRemovedOptionModule
* Correct maintainers list
* remove config key from example
* format basic-configuration.nix
* Update modules/services/espanso.nix
Co-authored-by: Naïm Favier <n@monade.li>
* fix maintainers list
---------
Co-authored-by: Naïm Favier <n@monade.li>
* pass-secret-service: Add dbus file, assert
Add the dbus service file in the package folder to XDG_DATA_HOME, as
well as adding an assertion to ensure both it and `gnome-keyring` aren't
enabled at the same time.
* pass-secret-service: Add self to CODEOWNERS
* pass-secret-service: Call out conflicting module(s)
* pass-secret-service: Revert `storePath` change
Signed-off-by: Cynthia Fox <cyntheticfox@gh0st.sh>
* pass-secret-service: Add password-store module default changes info
* pass-secret-service: Fix default info, modularize conflict checks
Signed-off-by: Cynthia Fox <cyntheticfox@gh0st.sh>
* Revert "pass-secret-service: Fix default info, modularize conflict checks"
This reverts commit 851df4fe49.
* pass-secret-service: Fix default info
Signed-off-by: Cynthia Fox <cyntheticfox@gh0st.sh>
* pass-secret-service: Indent `storePath` description
---------
Signed-off-by: Cynthia Fox <cyntheticfox@gh0st.sh>
Without this, even if you configure a preference for Electron apps to
use Ozone by setting `NIXOS_OZONE_WL=1`, GUI apps launched through
systemd user services use XWayland, since the variable is not set in
their environment.
This fixes that issue by importing it, like we do other variables.
The previous implementation tried to rename the tag named "default" to
the first tag in `cfg.tags`. This was a wrong approach because if a
tag with the same name already existed, the renaming failed and the
default tag would continue to exist.
The looking up of the default tag also contained a bug because it
should have used `by-name` in the path.
Before this change, the default config provided by this module wrote
an empty file to `$HOME/.config/avizo/config.ini`, which caused a
bunch of errors, as Avizo tries to read a 'group' from the ini file,
which fails.
This commit also adds associated test cases.
PR #3871
This reflects a systemd service sample file change made in borgmatic
1.7.6, commit 2e9f70d49647d47fb4ca05f428c592b0e4319544:
When backing up a machine with a monitor using logind to control
idle timeout and things like DPMS, borgmatic can block the screen
from turning on/off with systemd-inhibit. This is because by
default systemd-inhibit will block
"idle:sleep:shutdown". Borgmatic does not need to care about idle,
only about suspend and shutdown. So, add an explicit `--what` flag
for what borgmatic should inhibit.
For more information see systemd-inhibit(1).
Allow setting the application package and storePath used by the
config. Since the `programs.password-store` Home Manager module sets
config values via global environment variables, the default behavior
of the module should continue to behave as before for the user.
Additionally,
- Adds a few tests.
- Use "escapeShellArg" function call to the path parameter call to
ensure paths with spaces work.
- Allow not setting storePath, which will cause `pass_secret_service`
to default to using `~/.password-store`.
- If `pass-secret-service` is enabled, set its store path to default
to the one defined in our password-store environment settings.
- Add myself (houstdav000) as maintainer.
The default value for `xsession.windowManager.herbstluftwm.tags` is an
empty list, but the config file uses `builtins.head` on it, which causes
an error upon evaluation. With this change the tags configuration is
skipped if the list is empty.
The old trigger would actually never cause a restart since the path
doesn't change. With this change the trigger is now using the actual
configuration path in the Nix store, which depends on the content.
`--experimental-backends` flag was removed in the recent released picom
v10. Using it now will result in the program exiting.
v10 also introduces its counter-part, `--legacy-backends`. However this
will be removed soon. Instead of adding this as an separate option, add
`extraArgs` option so for those that they want they can pass it manuall.
It is also more future proof.
- The `XDG_SESSION_TYPE` environment variable is used by some applications and frameworks to
detect wayland sessions (i.e qt5/6, electron/chromium). It is set by wlroots since version 0.13.0 [1].
- Propagating `XDG_SESSION_TYPE` to the systemd user environment is necessary when processes launched by
services (e.g emacs) need to inherit the environment variable.
[1] - 90c8452959
If the user has enabled the XDG user directories module then we can
use the XDG music directory in the MPD module. Otherwise we'll leave
the option undefined so that the user is forced to define the
directory to use.
This applies to state version 22.11 and above.
Fixes#3225
The GNU Privacy Guard 2.3 man page for `gpg-agent` describes the
`--grab` and `--no-grab` options as follows:
> Tell the pinentry to grab the keyboard and mouse. This option should
> be used on X-Servers to avoid X-sniffing attacks. Any use of the
> option --grab overrides an used option --no-grab. The default is
> --no-grab.
Therefore Home Manager should explicitly output `grab` when
`cfg.grabKeyboardAndMouse` is true. Previously Home Manager emitted
`no-grab` when `cfg.grabKeyboardAndMouse` was false.
PR #3192
The `services.picom.opacityRule` option was renamed to
`services.picom.opacityRules`.
This was missed in #2939
Signed-off-by: Sumner Evans <me@sumnerevans.com>
swayidle executes commands using "sh -c" and so its PATH must contain
a shell. This adds such PATH entry to the environment of the systemd
service.
Fixes#2811.
This brings a few advantages:
- Use of float instead of strings to represent float values,
- Use of structure settings, and
- Better type checking for some settings
Also add thiagokokada as codeowner of picom.
Adds option settings, which writes settings to
.config/udiskie/config.yml.
Note, the option takes precedence against other options like notify,
automount or tray if they are configured in settings.program_options.
Add services.emacs.startWithUserSession boolean to indicate that Emacs
must be started with the systemd user session. This is true by default
unless socket activation is also true.
In the past, the user had to choose between socket activation (to get
the Emacs service started when the user uses emacsclient) and
immediate start with the user session. When choosing immediate start
over socket activation and if the Emacs service is stopped at some
point, using emacsclient would start a new Emacs daemon but the
service would still be turned off. This situation would prevent
`home-manager switch` from completing successfully because it wouldn't
be able to start the Emacs service as Emacs is already running.
This new setting makes it possible to have both socket activation and
immediate start at the same time. In this scenario, Emacs is started
with the user session and, after the Emacs service is stopped, using
emacsclient starts the service again.
This new settings also makes it possible to have neither socket
activation nor immediate start.
The `getmail` package will soon be removed from nixpkgs. The
`nixos-unstable` channel already has it removed and using the service
will result in:
error: getmail has been removed from nixpkgs, migrate to getmail6
Upgrade to the getmail6 package which is already available and backwards
compatible.
This is adapted from the `services.mopidy` NixOS module. The
difference is the setting can be configured with Nix language, taking
advantage of generators from nixpkgs. The module is also suited more
for user-specific configuration, removing the `extraConfigFiles` and
`dataDir` option.
In esoteric setups, automatically setting GPG_TTY to current tty is not
desired on every shell startup. This change adds configuration options
to allow user to disable that if desired.
Without this the journal will be filled by
xscreensaver[468297]: sh: line 1: xscreensaver-command: command not found
xscreensaver-systemd: 12:29:22: exec: "xscreensaver-command -quiet -deactivate" exited with status 127
Constrain the pgrep command to only return results for the current user.
Additionally, quote the socket variables to prevent splitting.
Previously, if multiple users on a system were running `sway`, the
`pgrep` used in finding `swaySocket` would return multiple results. As a
result, reloads of sway would fail.
Fixes#2912.
Removed by upstream since commit:
bcbc410c92
This commit is included since v9 release:
https://github.com/yshui/picom/releases/tag/v9https://github.com/yshui/picom/releases/tag/v9-rc1 (the actual changelog)
While this doesn't break the config per see, it results in the
following warning in the logs:
[ DD/MM/YYYY HH:MM:SS.mmm parse_config_libconfig WARN ] The
refresh-rate option has been deprecated. Please remove it from
your configuration file. If you encounter any problems without
this feature, please feel free to open a bug report
Beside the above change we also remove an old workaround and also
write the configuration file to a well-known location in the user's
home directory.
This would give the error "attempt to call something which is not a
function but a list" given that `optionals a b` returns a list. `indent`
is the one taking this empty set as second argument.
If set to true, desktops configured in `monitors` will be reset every time
the config is run.
If set to false, desktops will only be configured the first time the config is run.
This is useful if you want to dynamically add desktops and you don't want them
to be destroyed if you re-run `bspwmrc`.
When an hook is defined, a side effect was the creation of the
${notmuchIni.database.path}/.notmuch/ directory by home-manager. If
the Xapian database does not exist yet but this .notmuch directory
exists, Notmuch is confused and throws an error when `notmuch new` is
run (while this should create the database the first time).
This commit changes the hooks paths to $XDG_CONFIG_HOME where Notmuch
expects them (see notmuch-config(1)) instead of inside the maildir
database directory.
It also moves the configuration where Notmuch expects it, but the
$NOTMUCH_CONFIG environment variable is kept for backward
compatibility.
