swayidle executes commands using "sh -c" and so its PATH must contain
a shell. This adds such PATH entry to the environment of the systemd
service.
Fixes#2811.
This brings a few advantages:
- Use of float instead of strings to represent float values,
- Use of structure settings, and
- Better type checking for some settings
Also add thiagokokada as codeowner of picom.
Adds option settings, which writes settings to
.config/udiskie/config.yml.
Note, the option takes precedence against other options like notify,
automount or tray if they are configured in settings.program_options.
Add services.emacs.startWithUserSession boolean to indicate that Emacs
must be started with the systemd user session. This is true by default
unless socket activation is also true.
In the past, the user had to choose between socket activation (to get
the Emacs service started when the user uses emacsclient) and
immediate start with the user session. When choosing immediate start
over socket activation and if the Emacs service is stopped at some
point, using emacsclient would start a new Emacs daemon but the
service would still be turned off. This situation would prevent
`home-manager switch` from completing successfully because it wouldn't
be able to start the Emacs service as Emacs is already running.
This new setting makes it possible to have both socket activation and
immediate start at the same time. In this scenario, Emacs is started
with the user session and, after the Emacs service is stopped, using
emacsclient starts the service again.
This new settings also makes it possible to have neither socket
activation nor immediate start.
The `getmail` package will soon be removed from nixpkgs. The
`nixos-unstable` channel already has it removed and using the service
will result in:
error: getmail has been removed from nixpkgs, migrate to getmail6
Upgrade to the getmail6 package which is already available and backwards
compatible.
This is adapted from the `services.mopidy` NixOS module. The
difference is the setting can be configured with Nix language, taking
advantage of generators from nixpkgs. The module is also suited more
for user-specific configuration, removing the `extraConfigFiles` and
`dataDir` option.
In esoteric setups, automatically setting GPG_TTY to current tty is not
desired on every shell startup. This change adds configuration options
to allow user to disable that if desired.
Without this the journal will be filled by
xscreensaver[468297]: sh: line 1: xscreensaver-command: command not found
xscreensaver-systemd: 12:29:22: exec: "xscreensaver-command -quiet -deactivate" exited with status 127
Constrain the pgrep command to only return results for the current user.
Additionally, quote the socket variables to prevent splitting.
Previously, if multiple users on a system were running `sway`, the
`pgrep` used in finding `swaySocket` would return multiple results. As a
result, reloads of sway would fail.
Fixes#2912.
Removed by upstream since commit:
bcbc410c92
This commit is included since v9 release:
https://github.com/yshui/picom/releases/tag/v9https://github.com/yshui/picom/releases/tag/v9-rc1 (the actual changelog)
While this doesn't break the config per see, it results in the
following warning in the logs:
[ DD/MM/YYYY HH:MM:SS.mmm parse_config_libconfig WARN ] The
refresh-rate option has been deprecated. Please remove it from
your configuration file. If you encounter any problems without
this feature, please feel free to open a bug report
Beside the above change we also remove an old workaround and also
write the configuration file to a well-known location in the user's
home directory.
This would give the error "attempt to call something which is not a
function but a list" given that `optionals a b` returns a list. `indent`
is the one taking this empty set as second argument.
If set to true, desktops configured in `monitors` will be reset every time
the config is run.
If set to false, desktops will only be configured the first time the config is run.
This is useful if you want to dynamically add desktops and you don't want them
to be destroyed if you re-run `bspwmrc`.
When an hook is defined, a side effect was the creation of the
${notmuchIni.database.path}/.notmuch/ directory by home-manager. If
the Xapian database does not exist yet but this .notmuch directory
exists, Notmuch is confused and throws an error when `notmuch new` is
run (while this should create the database the first time).
This commit changes the hooks paths to $XDG_CONFIG_HOME where Notmuch
expects them (see notmuch-config(1)) instead of inside the maildir
database directory.
It also moves the configuration where Notmuch expects it, but the
$NOTMUCH_CONFIG environment variable is kept for backward
compatibility.
Swayidle is an idle management daemon for Wayland. This modules adds support for
running swayidle as a SystemD user unit and makes it configurable through
home-manager.
Currently, dot directories and XDG base directories are used
inconsistently in the Home Manager option declarations. This creates
ambiguity for the user as to where the location of the file should be
albeit this is rarely encountered in practice as it is sufficient to
read upstream documentation. The rationale is to make declarations
consistent and make a clear distinction between hardcoded and modular
specifications.
References to ~/.config in relevant nixpkgs modules were untouched as
the location is hardcoded upstream[1]. Furthermore, modules of
programs which do not follow XDG specifications were also untouched.
Generalization of tilde(~) expansions to $HOME were also considered,
however there isn't sufficient rationale despite the use of $HOME
being more universal. The expansion is standardized in POSIX[2] and is
essentially portable across all shells, thus there is no pragmatic
value to introducing the change.
[1] https://github.com/nixos/nixpkgs/blob/master/pkgs/top-level/impure.nix
[2] https://pubs.opengroup.org/onlinepubs/009695399/utilities/xcu_chap02.html#tag_02_06_01
Swaynag is a replacement of i3-nag for sway. Swaynag is embedded in
Sway's build process albeit it is not an integral part of Sway,
therefore it has been added under `wayland.windowManager.sway` instead
of `programs`. It can be moved at a later time if necessary.
Two unit tests were added validate the module behavior for an empty
configuration and the example configuration.
Rationale:
As of release 1.1.2[1], the configuration ini file supports
declaration of the `[main]` header as an alternative to global
properties by enumerating all sections and mapping each to the
respective parsing function. Global properties will still be parsed
correctly by fnott however generation adds unnecessary complexity to
the module. This commit removes the need for global properties
generation.
Changes:
- Fixed the FIXME at L118.
- Cleaned up unneeded let bindings.
- Changed the generation method to use the `pkgs.formats.ini` from
pkgs-lib instead of the raw `generators` library. This was done for
consistency and clarity as the `pkgs.formats.ini` is still required
for type declaration and uses `generators` internally.
- Removed `global-properties` testcase.
- Updated `example-settings` testcase.
[1] - https://codeberg.org/dnkl/fnott/releases/tag/1.1.2
* screen-locker: Make xautolock optional, reorganize options
xautolock isn't really needed to trigger xss-lock on the basis of time
since the built-in screensaver functionality of X serves as one of the
event sources for xss-lock. Keeping it around and defaulting to
"enabled" to avoid unexpected breakage.
Also shuffled around the options to submodules for xss-lock and
xautolock to get rid of prefixes in option names and to make
enableDetectSleep a bit clearer.
* screen-locker: update maintainership
* tests/screen-locker: Stub i3lock and xss-lock
* screen-locker: add package options for xss-lock and xautolock
kanshi configurations can have more than one exec statement in a
profile. This change allows services.kanshi.profiles.<name>.exec to be
a list of strings rather than a single string.
Specifically, instead of
services.dbus.packages = with pkgs; [ gnome.dconf ];
we now recommend
programs.dconf.enable = true;
which does the same and more.
Make `gpgconf` only perform an import from derivation when the GPG
`homedir` is set to a non-default value, which probably isn't the case
for most users.
- Change generation behavior to always generate a configuration file
and pass it explicitly to fnott, it enforces the module to be
hermetic instead of offloading the configuration selection to
heuristics.
- Various style changes.
- Fix issue where fnott would abort due to an invalid config file when
both the configFile and settings options are unset.
- Remove the empty-settings test as a configuration file is now
already generated.
Suggested-by: Robert Helgesson <robert@rycee.net>
Fnott is a keyboard driven and lightweight Wayland notification daemon
for wlroots-based compositors.
There are four unit test to validate behavior for an empty
configuration, the default configuration, global properties and
systemd service file generation.
* gpg-agent: local agent acting as ssh-agent should yield
This happens commonly if someone using home manager with gpg-agent
acting as ssh-agent on both machines.
@rycee brought up how gpg-itself has some support for agents on both
ends, but in that case one is forwarding the gpg-agent socket rather
than forwardning the gpg-agent-as-ssh-agent socket. There is no need to
forward both.
So I think this is a good default:
- Forward just gpg-agent socket and this doesn't matter.
- Forward just the ssh-agent socket and this does the right thing.
- Forward both sockets and now the ssh one takes priority instead, but
forwarding both was always a silly thing to do.
Fix#667
* Update modules/services/gpg-agent.nix
Co-authored-by: Nicolas Berbiche <nic.berbiche@gmail.com>
Co-authored-by: Nicolas Berbiche <nic.berbiche@gmail.com>
Fluidsynth's systemd unit currently has a hard dependency on the
pulseaudio systemd service. Since fluidsynth can use other sound
services (e.g., pipewire-pulse), this should be configurable. This
commit adds the relevant option.
PR #2238
* pulseeffects: change default example
pulseeffects-pw is now an alias to easyeffects, and the `pulseeffects` binary
that this module references is no longer in that package.
* easyeffects: add module
The easyeffects service is the PipeWire equivalent of the pulseeffects
service.
Before, loading a module would be guarded by an optional platform
condition. This made it possible to avoid loading and evaluating a
module if it did not support the host platform.
Unfortunately, this made it impossible to share a single configuration
between GNU/Linux and Darwin hosts, which some wish to do.
This removes the conditional load and instead inserts host platform
assertions in the modules that are platform specific.
Fixes#1906
* bspwm: various improvements
- fixes shell escaping issues and general style issues
- allow reloading the config on-the-fly by exposing bspwmrc to the user
* bspwm: add configuration test
When running a socket-activated emacs service, we don't want emacs to
remove the socket file after exiting, because then subsequent
invocations of `emacsclient` won't be able to use the socket to start
emacs.service again.
Emacs 27 added Type=notify support and updated the service definition to
remove the use of `emacsclient' to kill the service. Emacs 28 changes
the `StartupWMClass' in emacsclient.desktop to `Emacsd'. Update our
emacs.service and emacsclient.desktop definitions to match upstream
changes.
When killing emacs.service, the socket is removed, and subsequently
starting the service manually results in a service without a socket.
Prevent this by adding `RefuseManualStart=true' to the service's Unit
definition.
Drop Emacs 26 support as it is no longer shipped in nixpkgs. Update the
tests to verify the following configuration scenarios:
- Emacs version: 27, 28
- Socket activation: disabled, enabled
This target is for systemd units that require a system tray to be
running.
This also fixes taffybar.service: previously, systemd would consider it
to be active (running) before it was actually ready to accept tray
icons.
This change makes the services created via the lieer module aware of the notmuch config created by the home-mangager notmuch module (which is stored in a non-standard location).
Without this change all the lieer services created by the lieer module failed for me, as they were unable to find the notmuch config.
* i3, sway: extract border functionality to common function
Converted the i3 module to use default_border and
default_floating_border and extracted that functionality out to be
shared between the i3 and sway modules.
* i3: add sumnerevans as maintainer
* add service package option
* add waylandDisplay option dunst now supports wayland, and looks for WAYLAND_DISPLAY var to use it
Co-authored-by: @li:maisiliym.uniks <@li:maisiliym.uniks>
If the configuration is `null`, the compiled configuration
`xmonadBin` should not be used and instead the WM startup command
should be set to the bare `xmonad` binary.
The `libFiles` option allows Home Manager to manage additional files
for xmonad.
Also compile xmonad during configuration build time. This avoids the
need to compile the configuration during activation.
Polybar's config format is a bit strange, and lists in particular are
annoying to handle. This enables using normal nix lists and nested
attrsets instead.
This change is not backwards-compatible, because the INI converter
converts lists of strings to space-separated values, and this does
something else. I expect that this is only relevant for the
`modules-left` etc bar setting, but that's enough to break things :(.
Not every option is exposed by redshift/gammastep parameters, for
example gamma options are only exposed in configuration file. So this
PR refactors this module to generate a configuration file and pass it
to the redshift/gammastep using -c parameter.
This is a breaking change since there is no support for some of the
older options like `extraOptions`, but unless you use `extraOptions`
it should work without changes.
Not every option is exposed by redshift/gammastep parameters, for
example gamma options are only exposed in configuration file. So this
PR refactors this module to generate a configuration file and pass it
to the redshift/gammastep using -c parameter.
This is a breaking change since there is no support for some of the
older options like `extraOptions`, but unless you use `extraOptions`
it should work without changes.
Nowadays services.{redshift,gammastep} modules are really similar. They
should, since Gammastep is a fork of Redshift with the main objective is
to support Wayland.
So instead of trying to maintain two separate modules, this commit unify
the options in lib/options.nix file, making the implementation of the
module itself ends up being really simple (just calling the common
options with the necessary parameters to differentiate between them).
When setting `...sway.package = null`, the default bar configuration
would throw an error trying to use the bar from the null package.
Logic is added to use the bar from `pkgs.sway` instead of `cfg.package`
if it is null.
Fixes#1714
I also made some modifications to the systemd service to match the [AUR version](https://aur.archlinux.org/cgit/aur.git/tree/goimapnotify@.service?h=goimapnotify) of `goimapnotify`. In particular, restarting is useful in case a network failure causes `imapnotify` to exit - that shouldn't mean that it stops trying when the network comes back up.
Using the final package in the `onChange` block broke some use cases.
This restores the old behavior and instead solves the test
dependencies in a different way.
Fixes#1611
This reverts commit 7c3c64208e.
`pgrep -x somecommand` exits with a non-zero status if it finds no
process running with the given name. When using home-manager as a
NixOS module, on boot (when sway isn't running) this script would
fail and then fail the unit since it seems the onChange scripts
are running with the -e switch.
This change ensures we're always returning a 0 exit status where we
attempt to get the pid of sway - we're only interested in either the
pid or an empty string, the exit status isn't important.
The `ExecStart=` option of systemd must take arguments fully quoted.
That is,
"-sshargs=-i somekey"
and not
-ssargs="-i somekey"
Additionally, inside arguments passed to unison, `=` characters must
be quoted. After unquotation by systemd, one must have
-sshargs=-o Foo\=4
instead of
-sshargs=-o Foo=4
