Introduces a new program called gradle for managing files stored in
the home directory by the [Gradle Build Tool](https://gradle.org).
Gradle uses the $HOME/.gradle folder for all it's configuration.
Features of the new program module are:
- Automatically setting programs.java.enable = true to make a Java
installation available for running Gradle.
- Specifying an alternate Gradle home directory
- Setting of abitrary values for gradle.properties stored inside the
Gradle home directory.
- Defining init scripts that will be linked into the init.d inside
the Gradle home directory.
Co-authored-by: Olli Helenius <liff@iki.fi>
Co-authored-by: Robert Helgesson <robert@rycee.net>
Adds a program module for [Sapling](https://sapling-scm.com/).
Since Sapling itself is very similar in nature to Mercurial,
`modules/programs/mercurial.nix` was copied to make this module with
the ignore pieces removed (Sapling respects gitignore).
The release notes used to be an appendix in the manual. After
converting to markdown that appendix got lost. This commit
reintroduces the release notes into the manual.
Add the option sourceFirst to the hyprland module. When this option is
enabled source entries will be put near the top of the file, so that
the variables declared in other files can be used by the other
configuration entries.
Add "source" to the list of important prefixes when the former option
is enabled.
Resolves#4729
The `nixos-render-docs` tool outputs XHTML formatted content. In
order to convince browsers like `firefox` to treat the data as XHTML
the extension must be `.xhtml` and not `.html`.
Using the XHTML-formatted content as HTML is mainly an issue with
self-closing `<a />` tags.
Previously, users cannot enable boolean flags like `--show-all` in bat's
config since all options were expected to be either a string, or a list
of strings. With this commit boolean flags are simply appended to the
end of the config if they are set to `true`, and discarded otherwise.
For example, the config
{
theme = "TwoDark";
show-all = true;
lessopen = false;
}
would produce a config file that looks like
--theme='TwoDark'
--show-all
Fixes#4657
Occasionally, swayidle crashes with a failure to connect to the
Wayland session. Ideally, swayidle should automatically restart
instead of leaving the system in a vulnerable state.
Due to the defaults in `systemd.user.settings`, the default value when
there are no settings explicitly set is `{ Manager = { }; }`. This
means an empty file is created even when `systemd.user.settings` is
never used in home-manager configuration. Since user’s `user.conf` is
preferred to the global `/etc/systemd/user.conf`, this can cause any
values set in the latter to be discarded.
The `systemd.user.extraConfig` provides a way to generate a
`systemd-user.conf(5)` file for the user.
This is the home-manager equivalent of NixOS’s option of the same
name, with the difference that NixOS’s option generates a `user.conf`
file that is shared between all users.
This commit changes the config format of repositories to the
soon-be-expected `{ "path": "repository-path", }`. The Home Manager
configuration allows a simple string (which will get translated), the
new format by directly using the path attribute, and the one with the
optional label attribute. More information about the background can be
found here https://torsion.org/borgmatic/docs/reference/configuration/
* k9s: add hotkey option
This PR adds an option to customise k9s hotkeys.
The keyword `hotKey` must be in camel case on the user config.
* Update modules/programs/k9s.nix
Co-authored-by: Paul Meyer <49727155+katexochen@users.noreply.github.com>
* fix formatting
---------
Co-authored-by: Paul Meyer <49727155+katexochen@users.noreply.github.com>
When xdg.enable is set, aerc uses the $XDG_CONFIG_HOME variable instead
of the default $HOME/Library/Preferences. home-manager needs to check
this to make sure aerc can find the proper file in both cases.
When a process inside the sxhkd scope is OOM killed, if the OOM policy
is set to `stop` then the sxhkd scope itself will exit, terminating
every process launched from the keyboard.
This is undesirable, set it to `continue` instead to keep other
processes running.
The configuration file format of borgmatic has changed in version
1.8.0:
https://projects.torsion.org/borgmatic-collective/borgmatic/src/branch/main/NEWS
This commit makes Home Manager generate borgmatic's configuration file
using the new format.
Even though the NEWS file indicates that old configuration files are
compatible, this is not 100% the case: empty sections work fine in old
borgmatic but stop working in new ones. I've reported the bug upstream
by email as I couldn't create an account on the forge.
Specifically, allow variable expansion for the key codes by switching
from single to double quotes.
This also adds a helpful suggestion to descriptions. Taken from the
project's README, see
4abed97b6e/README.md (L71-L74))
Allows users to customize which environment variables to import in DBus
and SystemD user environments, and to specify which commands will be run
after the environment activation.
The way the `bat` module is currently written makes it essentially
impossible to use themes and syntaxes without IFD, since you must
provide the contents as string, instead of just giving a path to be
linked.
With this change, setting themes/syntaxes by-string will start issuing
warnings, and a new attribute model is added, lightly inspired by how
`programs.zsh.plugins` avoided this issue.
For some reason, Firefox completely discards the ADD_DATE and
LAST_MODIFIED attributes if they are set to 0. This has been
confirmed by exporting a sample set of bookmarks generated by
Nix using home-manager and comparing it to the same sample of
bookmarks set manually and then exported.
Missing these attributes can cause problems for extensions and
other tools that try to read bookmarks. A known example is the
Tridactyl extension.
Fixesnix-community/home-manager#4488
The default config for sway generates a bar block with tray_output primary. But wayland (or sway, take your pick?) has no concept of a primary display so this just results in no tray anywhere.
A better default is "*" which puts the tray on every monitor, since sway can do so without issue.
Signed-off-by: Sefa Eyeoglu <contact@scrumplex.net>
Adds a programs.rio module to control Rio installation and configuration, a gpu accelerated terminal
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Don't try to validate a limited set of hardcoded options, instead just
convert them as-is. Now, users can keep all their options in a single
attribute set, including arbitrary `user_{option}`s which was impossible
to express with a hard-coded submodule. As a plus, there is also less
maintainence burden.
* gh: option to enable helper for additional hosts
`gh` can also be used with github enterprise
hosts, for which there exists no easy option
to enable the credential helper except for
directly working with `programs.git.extraConfig`.
Not sure if this is a needed addition since it's
somewhat niche, at the same time it's not very
complex and makes the life of github enterprise
a little easier.
* gh: update credential-helper tests
* gh: refactor credential helper option
this moves from `enableGitCredentialHelper` to
`gitCredentialHelper.enable` and
`gitCredentialHelper.hosts`.
* gh: lib.mkIf -> mkIf
- On darwin, creates a launch agent to run git-sync on an interval and
when the `path` changes.
- The `uri` option is not used on Darwin. The auto-creation of the
local git directory from the `uri` is a feature of the
git-sync-on-inotify [1] wrapper (which won't work on Darwin afaik)
and not `git-sync` itself.
[1] https://github.com/simonthum/git-sync/blob/master/contrib/git-sync-on-inotify
* hyprland: prioritize variables and beziers
The `settings` key now handles `$variables` and `bezier`s differently,
putting them at the top of the file.
Also, proper indentation has been implemented.
* Update modules/services/window-managers/hyprland.nix
Co-authored-by: Naïm Favier <n@monade.li>
* hyprland: add animations & beziers test
---------
Co-authored-by: Naïm Favier <n@monade.li>
These (and the `*MD` functions apart from `literalMD`) are now no-ops
in nixpkgs and serve no purpose other than to add additional noise and
potentially mislead people into thinking unmarked DocBook documentation
will still be accepted.
Note that if backporting changes including documentation to 23.05,
the `mdDoc` calls will need to be re-added.
To reproduce this commit, run:
$ NIX_PATH=nixpkgs=flake:nixpkgs/e7e69199f0372364a6106a1e735f68604f4c5a25 \
nix shell nixpkgs#coreutils \
-c find . -name '*.nix' \
-exec nix run -- github:emilazy/nix-doc-munge/98dadf1f77351c2ba5dcb709a2a171d655f15099 \
--strip {} +
$ ./format
This process was automated by [my fork of `nix-doc-munge`]. All
conversions were automatically checked to produce the same DocBook
result when converted back, modulo minor typographical/formatting
differences on the acceptable-to-desirable spectrum.
To reproduce this commit, run:
$ NIX_PATH=nixpkgs=flake:nixpkgs/e7e69199f0372364a6106a1e735f68604f4c5a25 \
nix shell nixpkgs#coreutils \
-c find . -name '*.nix' \
-exec nix run -- github:emilazy/nix-doc-munge/98dadf1f77351c2ba5dcb709a2a171d655f15099 \
{} +
$ ./format
[my fork of `nix-doc-munge`]: https://github.com/emilazy/nix-doc-munge/tree/home-manager
The NixOS variant of Markdown doesn't make a distinction between
`<code>` and `<literal>` or `<quote>` and... quotes, and doesn't
support `<parameter>` or `<replaceable>`. These are infrequently used
(apart from `<code>`) and don't add much, so just convert them to
simpler forms to allow the options containing them to be converted
to Markdown automatically.
A few minor syntactic adjustments were also made to make
`nix-doc-munge`'s job easier.
Previously, lines in .zshrc were added with quotes in keys
(e.g. ZSH_HIGHLIGHT_STYLES['comment']='fg=#6c6c6c'). However, zsh
considered these quotes to be part of the key, so the "comment" key
remained unchanged.
* aerc: fix per-account extraConfig section names
The aerc configuration file `aerc.conf` can contain 10 different
sections, but only the UI section supports what the aerc manual calls
contextual configuration. This works by appending to the section heading
either `:account=name` or `:folder=bar`.
The aerc-accounts module, however, applied `mkAccountConfig` to each
section heading declared in
`config.accounts.email.accounts.<name>.aerc.extraConfig.*`. This means
home-manager will generate files with `[general:account=default]` and
the options will not be recognized by aerc.
To address this, and since it doesn't make sense for other sections to
only be under a single account's scope, an assertion has been added
to confirm that only sectons that support contextual config (i.e.,
only the UI section) is declared.
This also addresses confusions like declaring
`accounts.email.accounts.*.aerc.extraConfig.general.unsafe-accounts-conf
= true` and triggering a warning message because
`programs.aerc.extraConfig.general.unsafe-accounts-conf` was unset.
This commit also updated documentation throughout the aerc modules to
be in line with this change, and fixed minor typos/formatting therein.
Co-authored-by: Genevieve <genevieve@sunlashed.garden>
* aerc: make assertion plaintext and add test case
This commit adds a test case to check both the warning on unset
`unsafe-accounts-conf = true` when aerc accounts are configured
with Nix, and the new assertion when per-account configuration
contains unsupported subsections (i.e. general).
It also fixes minor formatting issues and typos.
