- The `XDG_SESSION_TYPE` environment variable is used by some applications and frameworks to
detect wayland sessions (i.e qt5/6, electron/chromium). It is set by wlroots since version 0.13.0 [1].
- Propagating `XDG_SESSION_TYPE` to the systemd user environment is necessary when processes launched by
services (e.g emacs) need to inherit the environment variable.
[1] - 90c8452959
Update notification popups are annoying when vscode/vscodium is
managed by Home Manager. However, as these settings also require the
configuration to be managed via `userSettings`, they are disabled by
default.
With this change, it's now possible to configure the default search
engine in Firefox with
programs.firefox.profiles.<name>.search.default
and add custom engines with
programs.firefox.profiles.<name>.search.engines.
It's also recommended to enable
programs.firefox.profiles.<name>.search.force = true
since Firefox will replace the symlink for the search configuration on
every launch, but note that you'll loose any existing configuration by
enabling this.
This will cache the output of `passwordCommand` per authentication
realm.
Context: the `credentials` key in `sbt` is a `TaskKey[Seq[Credentials]]`.
In `sbt`, tasks are evaluated on-demand and their output is not cached.
This particular key is referenced by all submodules in a project. When
the command is relatively expensive (e.g.: `pass show foo`), this
results in several seconds of delay when doing basic things like
`compile` or `test` which makes this unusable without some kind of
caching.
sbt allows overriding the default repositories to use to resolve
dependencies. This is often used with proxies and/or private
repositories to host internal packages.
This change adds a `repositories` attribute to `sbt` to allow
specifying the values that will go in `~/.sbt/repositories` file.
To support the above change we also deprecate the `baseConfigPath`
option in favour of `baseUserConfigPath` which points one level higher
by default. This allows not using relative paths to refer to the
top-level configuration directory.
Also adds tests for the new option and the deprecation of the previous
one.
At commit [5666e6b9](5666e6b9fb),
broot refactored the content of the file `/resources/default-conf.hjson`
into multiple files under the directory `/resources/default-conf`, using
[`imports`](5666e6b9fb/resources/default-conf/conf.hjson (L152-L165))
to refer to other configurations.
This refactoring is effective since version 1.14.0 of broot.
After this refactoring, in `xdg.configFile.broot` (which defaults to
`~/.config/broot`):
- we need to copy all potentially referenced files (all files under
`resources/default-conf`),
- except we need to leave out `conf.hjson` which conflicts with the
`conf.toml` generated by home-manager (because broot [accepts both conf.toml and conf.hjson](https://dystroy.org/broot/conf_file/))
To implement this, we use `symlinkJoin` to create the content of
`xdg.configFile.broot` by merging multiple sources.
* broot: use freeformType for config
* broot: use defaults from upstream
closes#2395
* broot: generate shell function
* broot: add @dermetfan to CODEOWNERS
* broot: rename `config` option to `settings`
* broot: make example more idiomatic
Co-authored-by: Nicolas Berbiche <nic.berbiche@gmail.com>
Co-authored-by: Nicolas Berbiche <nic.berbiche@gmail.com>
We change the current logic: instead of writing an init.vim which loads
lua/init-home-manager.lua, we write an init.lua that sources init.vim
This commit also avoids writing any of these files if the plugins have
no config.
Some configuration options can take space separated strings; for
example `SSLVersions` can be configured with multiple allowed
versions.
SSLVersions TLSv1.3 TLSv1.2
This can now be represented in Home Manager.
SSLVersions = [ “TLSv1.3” “TLSv1.2” ];
In implementing this change, it uses oneOf for config type, as it is a
cleaner way to represent the union than the nested eithers
formulation.
Also add SSLVersions to test lists of strings in
`account.extraConfig`.
If the user has enabled the XDG user directories module then we can
use the XDG music directory in the MPD module. Otherwise we'll leave
the option undefined so that the user is forced to define the
directory to use.
This applies to state version 22.11 and above.
Fixes#3225
The `tag.gpgSign` config option was added in Git 2.23.0 and seems like
it should be set in addition to `commit.gpgSign` when
`programs.git.signing.signByDefault` is enabled
This adds support for configuring email accounts, with automatic smtp, imap,
sendmail (msmpt) and maildir (mbsync, offlineimap) setup in aerc,
via `accounts.email`.
swayidle executes commands using "sh -c" and so its PATH must contain
a shell. This adds such PATH entry to the environment of the systemd
service.
Fixes#2811.
Removes the `uniq` constraint on `after` and `before` so that we can
merge multiple definitions for the same DAG entry:
{
dag = mkMerge [
{
foo = lib.hm.dag.entryBefore [ "bar" ] {
# definition 1
};
}
{
foo = lib.hm.dag.entryBefore [ "qux" ] {
# definition 2
};
}
{
foo = {
# definition 3
};
}
];
}
In this example `foo` will come before `bar` and `qux`.
This brings a few advantages:
- Use of float instead of strings to represent float values,
- Use of structure settings, and
- Better type checking for some settings
Also add thiagokokada as codeowner of picom.
This simplifies the code a bit and avoids using experimental Flake
functionality. If Flakes become stable before NixOS 22.11 then we can
consider having nmd and nmt as Flake inputs. Maybe could then also
avoid the need for flake-compat.
mujmap is a tool that synchronizes mail between a mail server and
notmuch via JMAP. It's very similar to lieer, so I heavily based the
implementation of the notmuch module on lieer's. I did not include an
equivalent to lieer's periodic synchronization service, however,
because I plan to soon introduce a daemon mode to mujmap.
https://github.com/elizagamedev/mujmap
The user should always explicitly set the state version they wish to
use. Indeed, the configuration generated by the Home Manager install
script has set this option for a long time. This removal should
therefore not affect many users.
Add services.emacs.startWithUserSession boolean to indicate that Emacs
must be started with the systemd user session. This is true by default
unless socket activation is also true.
In the past, the user had to choose between socket activation (to get
the Emacs service started when the user uses emacsclient) and
immediate start with the user session. When choosing immediate start
over socket activation and if the Emacs service is stopped at some
point, using emacsclient would start a new Emacs daemon but the
service would still be turned off. This situation would prevent
`home-manager switch` from completing successfully because it wouldn't
be able to start the Emacs service as Emacs is already running.
This new setting makes it possible to have both socket activation and
immediate start at the same time. In this scenario, Emacs is started
with the user session and, after the Emacs service is stopped, using
emacsclient starts the service again.
This new settings also makes it possible to have neither socket
activation nor immediate start.
* Add flake.lock and clean up flake.nix
Add a lockfile to work around https://github.com/NixOS/nix/issues/6541
(and because it's a good idea anyway).
Also use flake-utils, and restrict ourselves to the five platforms
supported by nixpkgs. Otherwise, the IFD for nmd fails on weird
platforms. This fixes `nix flake check`.
Remove the redundant `apps` output, see https://github.com/nix-community/home-manager/pull/2442#issuecomment-1133670487
* nixos,nix-darwin: factor out into a common module
* nixos,nix-darwin: make `home-managers.users` shallowly visible
Make sure the option is included in the NixOS/nix-darwin manual (but the
HM submodule options aren't).
Also add a static description to the HM submodule type so that we don't need to
evaluate the submodules just to build the option manual. This makes
nixos-search able to index the home-manager flake.
Also clean up some TODOs.
* flake: add nmd and nmt
This avoids having to use `pkgs.fetchFromGitLab` in an IFD, which causes
issues when indexing packages with nixos-search because `pkgs` is
instantiated with every platform.
M_SHARE is not a valid column on Darwin. It seems that previously htop
ignored unknown columns, but the current version does not display all
subsequent columns.
This is adapted from the `services.mopidy` NixOS module. The
difference is the setting can be configured with Nix language, taking
advantage of generators from nixpkgs. The module is also suited more
for user-specific configuration, removing the `extraConfigFiles` and
`dataDir` option.
This module adds basic support for configuration specializations.
These allow the user to build multiple alternative configurations that
should be part of the same generation.
Neomutt will run the given command (which can be a string or a path)
and take the output from stdout and use it as the signature for your
email.
Co-authored-by: Nicolas Berbiche <nicolas@normie.dev>
Removed by upstream since commit:
bcbc410c92
This commit is included since v9 release:
https://github.com/yshui/picom/releases/tag/v9https://github.com/yshui/picom/releases/tag/v9-rc1 (the actual changelog)
While this doesn't break the config per see, it results in the
following warning in the logs:
[ DD/MM/YYYY HH:MM:SS.mmm parse_config_libconfig WARN ] The
refresh-rate option has been deprecated. Please remove it from
your configuration file. If you encounter any problems without
this feature, please feel free to open a bug report
Beside the above change we also remove an old workaround and also
write the configuration file to a well-known location in the user's
home directory.
This is achieved by generating the Home Manager configuration
file as `~/.config/task/home-manager-taskrc`, and including that
file into ~/.config/task/taskrc.
Fixes#2360
Co-authored-by: mainrs <5113257+mainrs@users.noreply.github.com>
Co-authored-by: Nicolas Berbiche <nicolas@normie.dev>
* systemd: fix creation of user service unit files
* helix: fix failing test due to file output format change
Co-authored-by: Nicolas Berbiche <nicolas@normie.dev>
This makes definitions like
home.activation.foo = mkIf false "bar"
work, where previously they would complain about
`home.activation.foobar.data` being used but not defined.
The crucial part is that we don't call `convertAllToDags` in
`dagOf.merge`, because we need to process `mkIf`/`mkMerge` properties
first. So we let `attrEquivalent.merge` do its job normally, but give
it a type `dagEntryOf` that does the conversion.
Ideally this shouldn't require so much boilerplate; I'd like to
implement something like
types.changeInto dagContentType elemType dagEntryAnywhere
in Nixpkgs.
The conversion from `concatMapStrings` to `concatStringsSep` introduced in https://github.com/nix-community/home-manager/pull/2481
creates an unintended behavior change where the formatted config does not end in a newline.[1]
This is problematic for manipulation at the Nix level. In particular, this cause a regression in
the generation of gtk2 settings due to concatenated of the formatted config and `gtk2.extraConfig`
without a newline in between.
This commit restores `concatMapStrings` to match the previous behavior and adds a newline to
the final string for the generated gtk2 config. The test case for gtk2-basic-config
was also updated to check behavior at concatenation boundaries.
[1] - https://github.com/nix-community/home-manager/pull/2481#discussion_r830648706
If set to true, desktops configured in `monitors` will be reset every time
the config is run.
If set to false, desktops will only be configured the first time the config is run.
This is useful if you want to dynamically add desktops and you don't want them
to be destroyed if you re-run `bspwmrc`.
Nix permits user level configurations through ~/.config/nix/nix.conf that allow
customization of system-wide settings and behavior. This is beneficial in chroot
environments and for per-user configurations. System level Nix configurations in the
form of /etc/nix/nix.conf can be specified declaratively via the NixOS nix module but as
of currently no counter part exists in home-manager.
This PR is a port of the RFC42 implementation for the NixOS nix module[1]
to home-manager. Non-applicable options have been excluded and the config generation
backends have been tweaked to the backends offered by home-manager. A notable change
from the NixOS module is a mandatory option to specify the Nix binary corresponding
to the version "nix.conf" should be generated against. This is necessary because
the validation phase is dependent on the `nix show-config` subcommand on the host platform.
While it is possible to avoid validation entirely, the lack of type checking was deemed too significant.
In NixOs, the version information can be retrieved from the `package` option itself which
declares the Nix binary system-wide. However in home-manager, there is no pure way to
detect the system Nix version and what state version the "nix.conf" should be generated
against. Thus an option is used to overcome this limitation by forcing the user to
specify the Nix package. Note this interaction can still be automated by forwarding
the system-wide Nix package to the home-manager module if needed.
Three unit tests were added to test the module behavior for the empty settings, the example
settings and the example registry configurations respectively.
[1] - NixOS/nixpkgs#139075
* gtk: add cursor theme configuration
- Added the `cursorTheme` under the gtk module.
- Added tests for the gtk3 settings file generation, and renamed
the gtk2 unit test expected file for clarity.
- Added guard against generating a blank `gtk.css` when `cfg.extraCss`
is empty.
- Replaced `concatMapStrings` calls with `concatStringsSep`. The library function
`concatMapStrings` generates an intemediate list which is then passed to
`concatStringsSep`, As we are not performing other transformation except
the addition of newlines, a direct call to `concatStringsSep` is sufficient.
- Updated description of examples to be more general "~/.config" -> "$XDG_CONFIG_HOME".
- Update helper functions `toGtk3Ini` and `formatGtk2Option` to use the library
function `boolToString` and escape the separator in the key name.
* xcursor: delegate GTK cursor settings to gtk.cursorTheme
- Added deprecation warning for GTK settings in the `xsession.cursorTheme` module.
- Modified config section to use `gtk.cursorTheme` for GTK cursor settings.
This has no effect if the user does not have any aliases defined for
any accounts.
This will also only add `--my-address=` to only accounts that are
enabled to be tracked by mu.
Note, the pubs configuration file uses ConfigObj syntax, which is
similar to the INI files syntax but with extra functionalities like
nested sections. This prevents it from using Nix's INI format
generator. Here is an example of pubs configuration that cannot be
generated using Nix's INI format generator:
[plugins]
[[git]]
manual=False
For this reason, we opted for a stringly-typed configuration since the
use of a structured `settings` option would require a custom parser.
Previously, if a process inside a foot client triggered the OOM killer,
systemd would also kill the parent unit, namely the foot server.
This is not ideal if a user has a lot of clients attached, and it's
usually not the terminal emulator's fault that a process inside it has
ended up using all the available memory.
There seems to be some changes on how wrapped binaries are implemented
on nixpkgs. This broke the nnn tests since the tests were coupled with
the old implementation.
This commit fix the tests, and also make it less coupled by just testing
if the bookmarks/plugins/environment variables are available.
This patch moves both home.sessionVariables and
programs.zsh.sessionVariables from .zshrc to .zshenv. Additionally,
these two kinds of session variables will not be sourced more than
once to allow user-customized ones to take effect.
Before, session variables are in .zshrc, which causes non-interactive
shells to not be able to get those variables. For example, running a
command through SSH is in a non-interactive and non-login shell, which
suffers from this. With this patch, all kinds of shells can get
session variables.
The reason why these session variables are not moved to .zprofile is
that programs started by systemd user instances are not able to get
variables defined in that file. For example, GNOME
Terminal (gnome-terminal-server.service) is one of these programs and
doesn't get variables defined in .zprofile. As a result, the shells it
starts, which are interactive and non-login, do not get those
variables.
Fixes#2445
Related NixOS/nixpkgs#33219
Related NixOS/nixpkgs#45784
This file is not formatted before and is excluded by ./format, so I don't format it.
When an hook is defined, a side effect was the creation of the
${notmuchIni.database.path}/.notmuch/ directory by home-manager. If
the Xapian database does not exist yet but this .notmuch directory
exists, Notmuch is confused and throws an error when `notmuch new` is
run (while this should create the database the first time).
This commit changes the hooks paths to $XDG_CONFIG_HOME where Notmuch
expects them (see notmuch-config(1)) instead of inside the maildir
database directory.
It also moves the configuration where Notmuch expects it, but the
$NOTMUCH_CONFIG environment variable is kept for backward
compatibility.
Watson is a CLI for tracking your time.
Two unit tests were added to validate the module behavior for an empty
configuration and the example configuration.
Based on nixpkgs commit c4b3aa62608d592d8a983be685f7e82000f4de30
stringBool is not needed because makeDesktopItem handles converting boolean parameters to string,
and noDisplay and prefersNonDefaultGPU parameters have been added.
Swayidle is an idle management daemon for Wayland. This modules adds support for
running swayidle as a SystemD user unit and makes it configurable through
home-manager.
The empty configuration test for the bottom module introduced as of https://github.com/nix-community/home-manager/pull/2323
is not cross platform. Specifically, it silently fails under a darwin environment due to
the configuration file not being generated at $XDG_CONFIG_HOME. This PR add cross platform support
by specifying the platform-dependent configuration directories to check. The expected unit test data
was also extracted to a separate file to differentiate between test data changes and
changes to the test itself.
Write YubiKey token IDs in the format yubico_pam expects. See
https://developers.yubico.com/yubico-pam/ for details. Also refer to
the NixOS option security.pam.services.<name>.yubicoAuth.
Closes#2502
The `style` option now also accepts a path instead of a text
configuration.
Keeping up with new Waybar options is annoying, so make the module a
freeform module.
The `modules` option will be removed in release 22.05.
The logic to generate warnings for modules and everything was
removed. I don't want to maintain the code that generates these
warnings anymore.
Since Rofi 1.7.1 (specifically davatorium/rofi@0e70d8a), the deprecated
`theme` option in the `configuration` section no longer works. For 1.7.0
and up, `@theme "name"` is supposed to be used *after* the
`configuration` block.
Swaynag is a replacement of i3-nag for sway. Swaynag is embedded in
Sway's build process albeit it is not an integral part of Sway,
therefore it has been added under `wayland.windowManager.sway` instead
of `programs`. It can be moved at a later time if necessary.
Two unit tests were added validate the module behavior for an empty
configuration and the example configuration.
Add an option to set custom `$ZPLUG_HOME`. Changing it with
`home.sessionVariables` doesnt work, since it has to be exported
before Zplug is initialised
Rationale:
As of release 1.1.2[1], the configuration ini file supports
declaration of the `[main]` header as an alternative to global
properties by enumerating all sections and mapping each to the
respective parsing function. Global properties will still be parsed
correctly by fnott however generation adds unnecessary complexity to
the module. This commit removes the need for global properties
generation.
Changes:
- Fixed the FIXME at L118.
- Cleaned up unneeded let bindings.
- Changed the generation method to use the `pkgs.formats.ini` from
pkgs-lib instead of the raw `generators` library. This was done for
consistency and clarity as the `pkgs.formats.ini` is still required
for type declaration and uses `generators` internally.
- Removed `global-properties` testcase.
- Updated `example-settings` testcase.
[1] - https://codeberg.org/dnkl/fnott/releases/tag/1.1.2
nnn is a terminal file manager.
It is configured mostly using environment variables, so the way I
found it to avoid needing to write either shell specific code or
using `home.sessionVariables` (that would need to make the user
relogin at every configuration change) is to wrap the program using
`wrapProgram`.
This commit adds a module for configuring atuin, a replacement shell
history program.
The module adds options for generating atuin's `config.toml` from Nix,
and options to enable atuin's integration for bash and zsh
(which will rebind history keys to open the atuin history).
* screen-locker: Make xautolock optional, reorganize options
xautolock isn't really needed to trigger xss-lock on the basis of time
since the built-in screensaver functionality of X serves as one of the
event sources for xss-lock. Keeping it around and defaulting to
"enabled" to avoid unexpected breakage.
Also shuffled around the options to submodules for xss-lock and
xautolock to get rid of prefixes in option names and to make
enableDetectSleep a bit clearer.
* screen-locker: update maintainership
* tests/screen-locker: Stub i3lock and xss-lock
* screen-locker: add package options for xss-lock and xautolock
kanshi configurations can have more than one exec statement in a
profile. This change allows services.kanshi.profiles.<name>.exec to be
a list of strings rather than a single string.
This option provides a more convenient way to overlay dummy packages.
It also adds a function `config.lib.test.mkStubPackage` that can,
e.g., be used for `package` options.
Currently, when a custom path is set for any of the XDG base
directories (i.e XDG_DATA_HOME, XDG_CONFIG_HOME, ...), the path will
be coerced into a string when consumed by other options such as
xdg.configFile et al. This causes the the given path to be copied to
the nix store which in the case of xdg.configFile et al, translate to
the file being written there as it is a absolute path.
Interestingly, the default base directories all work as intended as
they are encoded as a string.
This commit converts the option to a string regardless of whether it
is a primitive path or a string encoded path. This allows downstream
consumers to use the base directories in arbitrary way without
accidentally copying the content of the directory to the store. It is
implemented in a similar manner as how home.homeDirectory undergoes
string conversion.
The existing file-attr-name test was modified to test also custom xdg
base directories, and the home.file generation test was removed as
there is a dedicated test for this case in the files module. The test
case was renamed to file-gen to better reflect the new scope.
Bottom is a cross-platform graphical process/system monitor with a
customizable interface and a multitude of features.
Two unit tests were added validate the module behavior for an empty
configuration and the example configuration.
- Change generation behavior to always generate a configuration file
and pass it explicitly to fnott, it enforces the module to be
hermetic instead of offloading the configuration selection to
heuristics.
- Various style changes.
- Fix issue where fnott would abort due to an invalid config file when
both the configFile and settings options are unset.
- Remove the empty-settings test as a configuration file is now
already generated.
Suggested-by: Robert Helgesson <robert@rycee.net>
Fnott is a keyboard driven and lightweight Wayland notification daemon
for wlroots-based compositors.
There are four unit test to validate behavior for an empty
configuration, the default configuration, global properties and
systemd service file generation.
At the moment, only the inbox of each mail account is added to neomutt.
This inbox is always called "Inbox", so if you configure multiple
accounts, it is hard to know which one is which.
This change allows the user to specify a display name per account that
uses `named-mailboxes` under the hood.
Additionally this change now allows to add other folders than the inbox,
for example the Trash, Spam or Drafts folders to be added on a per-account
basis. Using extraOptions is not possible here, as those are lazily
loaded on mailbox open and thus would appear at the bottom and not sorted
by account.
This commit also changes the default sidebar format string to use %D
instead of %B because %B will ignore named mailboxes and show the folder
name instead.
Fluidsynth's systemd unit currently has a hard dependency on the
pulseaudio systemd service. Since fluidsynth can use other sound
services (e.g., pipewire-pulse), this should be configurable. This
commit adds the relevant option.
PR #2238
When the 'fields' setting is not set in htoprc, the htop program won't read any
of the settings. Provide a default value for fields in case it's not explicitly
set by the user.
This adds two new options: 'programs.neovim.coc.{enable,settings}`.
These settings offer a simple interface over `xdg.configFile."nvim/coc-settings.json`,
using the standard Nix' syntax instead of a multiline string.
* bspwm: various improvements
- fixes shell escaping issues and general style issues
- allow reloading the config on-the-fly by exposing bspwmrc to the user
* bspwm: add configuration test
- Add support for showing bold as bright colors
- Add support to configure the background transparency
- Fix the scrollOnOutput, it was not being dumped to the config
- Add tests!
- Add myself as maintainer
NixOS/nixpkgs@03310df843 disabled flake
support by default, so we now need to build a custom package and use it
if the user wants to `use flake` successfully. This should fix#2087.
* irssi: add ssl_cert option for servers
I was following these instructions
https://www.oftc.net/NickServ/CertFP/
and found that the `/server add -ssl_cert` option was needed.
This patch therefore adds an optional
`programs.irssi.networks.<name>.server.ssl.certificateFile` path.
Perhaps this could also be done with a `settings` attribute, but that
would probably require most of this module to be reworked.
* irsii: Add example-settings test case
`rbw` is a stand-alone Bitwarden client, which makes use of a daemon to
cache your password and manage state.
Its configuration can be managed by `home-manager` or not, leaving the
user free to configure it through `rbw config`.
When running a socket-activated emacs service, we don't want emacs to
remove the socket file after exiting, because then subsequent
invocations of `emacsclient` won't be able to use the socket to start
emacs.service again.
Emacs 27 added Type=notify support and updated the service definition to
remove the use of `emacsclient' to kill the service. Emacs 28 changes
the `StartupWMClass' in emacsclient.desktop to `Emacsd'. Update our
emacs.service and emacsclient.desktop definitions to match upstream
changes.
When killing emacs.service, the socket is removed, and subsequently
starting the service manually results in a service without a socket.
Prevent this by adding `RefuseManualStart=true' to the service's Unit
definition.
Drop Emacs 26 support as it is no longer shipped in nixpkgs. Update the
tests to verify the following configuration scenarios:
- Emacs version: 27, 28
- Socket activation: disabled, enabled
* xdg-desktop-entries: add module
rebase
* xdg-desktop-entries: adapt to changes in makeDesktopItem
This package depends on the makeDesktopItem function in nixpkgs, which recently changed its syntax:
https://github.com/NixOS/nixpkgs/pull/91790
This commit makes the module compatible with the new syntax.
It also exposes the fileValidation option in makeDesktopItem.
Co-authored-by: cwyc <cwyc@users.noreply.github.com>
Co-authored-by: --get <--show>
Pass meters for formatting in a list of attrsets so that ordering can be
preserved. In addition provide some mode-specific functions to create these
attrsets, to make for a bit nicer config.
This fixes#2060.
* isync/mbsync: replace master/slave with far/near
isync/mbsync: update tests to match new changes
* isync/mbsync: use mkRenamedOptionModule to alert user to near/far change
* isync/mbsync: use warnings to alert about master/slave far/near change
Fix capitalization
isync/mbsync: fix nitpicks
* isync/mbsync: run format script
* isync/mbsync: include new test for expected master/slave warnings
* isync/mbsync: add news about changes
* htop: add some missing meters
* htop: replace individual options with 'settings'
Deprecate all options and introduce `settings` for setting htop configuration
values in Nix configuration.
Use `lib.htop` to provide `fields` and `modes` for easy access to htop's integer
configuration. And `leftMeters` and `rightMeters` functions for building the
separate `*_meters` and `*_meter_modes` attributes.
* htop: add release-notes 21.05 entry
* htop: improve deprecation warnings
Move default configuration into `settings` and make deprecated options default
to `null`. Print deprecation warnings for any option that is non-null --
i.e. only show warnings for explicitly specified deprecated options.
* htop: make self code owner of module
* release notes: fix invalid programs.htop xref
Foot is a fast terminal emulator for Wayland. It can optionally be run
in a client-server configuration.
There are three unit tests to handle an empty configuration, the
default configuration, and systemd service file generation.
There is a need to manage XDG Base Directory system directory
environment variables in Home Manager modules. There is an existing
mechanism in `targets.genericLinux.extraXdgDataDirs', but this does not
apply to NixOS systems.
Furthermore, it is important that `XDG_CONFIG_DIRS' and `XDG_DATA_DIRS'
are set in both login shells (to support getty and SSH sessions) as well
as the systemd user manager (to propagate them to user services and
desktop environments).
The first need is addressed by adding the `xdg.systemDirs' module, which
configures lists of directory names for both `config' and `data'
directories. These are then set in
`$XDG_CONFIG_DIR/environment.d/10-home-manager.conf' and picked up by
the systemd user manager.
To make these, and other variables set in
`systemd.user.sessionVariables', available in login shells, an
additional step is added to `etc/profile.d/hm-session-vars.sh' which
exports the result of
`user-environment-generators/30-systemd-environment-d-generator' which
is shipped with systemd. The effect of this generator is to print
variables set on the systemd user manager such that shells can import
these into their environment.
`nix-index` is a tool to quickly locate the package providing a certain
file in `nixpkgs`. It indexes built derivations found in binary caches.
This module adds the shell integration for its `command-not-found`
script for interactive shells.
This change makes the services created via the lieer module aware of the notmuch config created by the home-mangager notmuch module (which is stored in a non-standard location).
Without this change all the lieer services created by the lieer module failed for me, as they were unable to find the notmuch config.
* i3, sway: extract border functionality to common function
Converted the i3 module to use default_border and
default_floating_border and extracted that functionality out to be
shared between the i3 and sway modules.
* i3: add sumnerevans as maintainer
* Git: Make signing key id be optional
Thus by default the signing key is selected by commit’s author.
* Git: Add tests for config with and without signing key id
* Git: Format tests for signing key
* Git: Remove default value (null) for signing key
* Git: Update description for signing key
* neomutt: support list in binds.map
Closes#1245
Adds support for specifying programs.neomutt.binds[].map as a list. If
specified as a list, then the binds will be concatenated with a ",".
* neomutt: add deprecation warning for (binds|macros).map as string
Added note that specifying 'programs.neomutt.(binds|macros).map' as a string is deprecated. Instead, use the list form.
* neomutt: note deprecation warning in release notes
Added note that specifying 'programs.neomutt.(binds|macros).map' as a
single string is deprecated in favor of specifying it as a list
* neomutt: add assertion that map is not empty
Added an assertion that each 'programs.neomutt.(binds|macros).map' list contains at least one element.
* neomutt: Fix eval error when primary account not enabled
If neomutt is enabled for an account, but not the primary account, the
configuration will fail with "list index 0 is out of bounds".
This adds the first neomutt-enabled account as a fallback.
* neomutt: add regression test/update tests
Set the systemd user service to use "mixed" killmode, which lets waybar
stop its module scripts. This fixes issues where waybar blocks shutdown
until systemd sends a SIGKILL to waybar child processes.
This allows you to set a theme for Qt applications. For example, if you
want to use `adwaita-qt` theme to have uniform look between Gtk and Qt
applications, you can use it like this:
```nix
{
qt = {
enable = true;
platformTheme = "gnome";
style = {
name = "adwaita";
package = pkgs.adwaita-qt;
};
};
}
```
The mailboxes must be a tuple of string or the string "ALL".
The generated value was broken if the mailboxes configuration was a list
of only one string (but not "ALL"): the generated expression ( "str" )
was not a tuple but a string.
Now, we always generate a tuple (by adding a comma, even with a list of
size one). Getmail works with the special value "ALL" whether it is a
in tuple or not, so this case is not specifically handled.
If a user using msmtp to send all their email, it would be preferred if
git used it as well.
The only settings necessary are to set the smtp server to the msmtp
binary and set envelop sender to true, which makes git call msmtp with
the -f flag to set the from address from the email.
Polybar's config format is a bit strange, and lists in particular are
annoying to handle. This enables using normal nix lists and nested
attrsets instead.
This change is not backwards-compatible, because the INI converter
converts lists of strings to space-separated values, and this does
something else. I expect that this is only relevant for the
`modules-left` etc bar setting, but that's enough to break things :(.
* zsh: update prezto path structure
The path structure was changed in Nixpkgs and this commit updates
the module to match.
Fixes#1773
* zsh-prezto: fix tests, small tidyup
Co-authored-by: Nick Hu <me@nickhu.co.uk>
Not every option is exposed by redshift/gammastep parameters, for
example gamma options are only exposed in configuration file. So this
PR refactors this module to generate a configuration file and pass it
to the redshift/gammastep using -c parameter.
This is a breaking change since there is no support for some of the
older options like `extraOptions`, but unless you use `extraOptions`
it should work without changes.
Not every option is exposed by redshift/gammastep parameters, for
example gamma options are only exposed in configuration file. So this
PR refactors this module to generate a configuration file and pass it
to the redshift/gammastep using -c parameter.
This is a breaking change since there is no support for some of the
older options like `extraOptions`, but unless you use `extraOptions`
it should work without changes.
If this commit now it is possible to define a custom theme directly
using Nix, like this:
```nix
{
programs.rofi.theme = {
"*" = {
background-color = "#000000";
border-color = "FFFFFF";
width = 512;
};
listview = {
cycle = true;
};
};
}
```
And this will be converted to the proper rasi format to be used in
rofi.
* rofi: migrate to rasi configuration format
The Xresources configuration format is deprecated in Rofi. For example,
using Rofi from unstable (1.6.1 as of now) you get the following
warnings when starting the application:
```
(process:9272): Rofi-WARNING **: 01:38:48.596: The old Xresources based configuration format is deprecated.
(process:9272): Rofi-WARNING **: 01:38:48.596: Please upgrade: rofi -upgrade-config.
``````
So this commit migrates it for its new configuration format, called rasi
instead.
This new implementation uses attrsets manipulation instead of using
strings, making the code clearer and also fixing some bugs found during
the way. To make sure everything is right, I also created some tests.
If someone wants to validate if the generated config is correct, just
run in terminal:
```
$ rofi -dump-config
```
And rofi will dump the current configuration file, including all
unsetted options.
* docs: document programs.rofi.extraConfig changes
* rofi: add thiagokokada as maintainer
* rofi: add toRasi function
Closes issue #1725.
This allows mpv module to be customized with support for more advanced
features than the `programs.mpv.scripts` current support. For example,
with this change now this is possible:
```nix
{
programs.mpv.package = (pkgs.wrapMpv (pkgs.mpv-unwrapped.override {
vapoursynthSupport = true;
}) {
extraMakeWrapperArgs = [
"--prefix" "LD_LIBRARY_PATH" ":" "${pkgs.vapoursynth-mvtools}/lib/vapoursynth"
];
});
}
```
Since `programs.mpv.package` doesn't necessary reflect the final
derivation anymore (see #1524), we introduce `programs.mpv.finalPackage`
that has the resulting derivation.
This includes 2 tests:
- One to check if everything is alright with mpv
- Other to validate our assertion that package and scripts can't be
passed both at the same time
* docs: document recent mpv module changes
* mpv: add thiagokokada as maintainer
When setting `...sway.package = null`, the default bar configuration
would throw an error trying to use the bar from the null package.
Logic is added to use the bar from `pkgs.sway` instead of `cfg.package`
if it is null.
Fixes#1714
This adds a "test.asserts" module that currently just provides a
convenient way to assert on the content of warnings. By default all
tests will assert that no warnings are given.
* neovim: write config in $XDG_CONFIG_HOME/init.vim
instead of wrapping the configuration, which has sideeffects
https://github.com/NixOS/nixpkgs/issues/55376
* fix: update test accordingly
Previously, it was not possible to set an arbitrary tmux prefix since
CTRL was hardcoded in the module.
To avoid breaking existing configs, a new option was implemented that
conveniently uses the tmux terminology but defaults to null and does
not affect previous behavior when set to null.
The behavior for the shortcut option was not completely replicated,
i.e., it does not bind "b" to send-prefix but stick to the default of
the prefix binding sending prefix (C-b C-b instead of C-b b) and it
does not bind repetition of the prefix (C-b C-b) to `last-window`,
both of these bring the option closer to the default tmux
configuration.
Fixes#1237
The current definition makes waybar wait for dbus.service, but that
never happens because dbus.service is started on demand by
dbus.socket.
Per systemd docs:
https://www.freedesktop.org/software/systemd/man/systemd.service.html#Implicit%20Dependencies
- Services with Type=dbus set automatically acquire dependencies of
type Requires= and After= on dbus.socket.
- Socket activated services are automatically ordered after their
activating .socket units via an automatic After= dependency.
Services also pull in all .socket units listed in Sockets= via
automatic Wants= and After= dependencies.
Removing Requisite/After makes the service properly start for me,
simply specifying Type=dbus is enough.
See #1370
Using the final package in the `onChange` block broke some use cases.
This restores the old behavior and instead solves the test
dependencies in a different way.
Fixes#1611
This reverts commit 7c3c64208e.
This test requires copying the Home Manager checkout to the Nix store,
which seems to require too much memory for the CI jobs. Instead simply
run the format script directly.
This causes list values to be emitted as a list of key-value pairs
instead of a single key-value pair where the value is space separated.
This is useful, e.g., for socket units that would like to specify more
than one `ListenStream=` address.
The `accounts.email.accounts.<name>.neomutt.extraConfig` option is
included twice in the resulting config file for the account. One time as
part of the `mraSection`, one time as part of `accountStr` (`accountStr`
includes the `mraSection`). This removes that duplication. I opted to
keep the one in `accounStr`, since `extraConfig` doesn't necessarily
have anything to do with the `mraSection`.
In feh you can bind multiple keys to the same action, but Home Manager
only let you set a single key to an action. You can cheat and pass a
string with space-separated keys, but with this change you can pass a
list for each action to bind multiple keys to it.
Also adds a couple of tests.
Fixes#1366
* neovim: allow setting init.vim config alongside plugins
* neovim: add test for neovim plugins
* neovim: make pluginWithConfigType a have type submodule
* mbsync: option for configuring a channel
A channel is a relationship between 2 directories/boxes/mailboxes
between the local machine (slave) and the remote mail server (master).
Each channel must be given at least:
* an account-unique name
* a pattern for which mailboxes to sync from master
* a pattern for what directory where that mail ends up on the
slave
Additional options can be added later.
* mbsync: option for configuring a group
A group is a grouping of channels together, so that many channels with
very different names can be handled as a single entity.
Groups are unique in mbsync because they will shadow channels that
have the same name on the command-line.
* mbsync: create groups configuration attribute
This is the end of the configuration that the end-user will use.
They will specify an attribute set that contains the name for the
group, so they can say
`accounts.email.accounts.<aname>.groups.<gname>` to access the
configuration for the group with the name `<gname>`.
* mbsync: write function to generate group-channel blocks
This function takes in a set of groups, and their consituent
channels and writes the appropriate .mbsyncrc block. The block is as
shown below:
Group groupName1
Channel channelName1
Channel channelName2
Group groupName2
Channel channelName3
Each group must have a unique name, no matter which account it is
declared under. The same holds true for channels. However, if there is
a group that shares the same name as the channel, the channel will
effectively be "shadowed" by the group, and mbsync will default to
working with the group in that case.
* mbsync: write function to generate channel configuration blocks
This function takes in a set of groups, which includes their
consituent channels and writes the appropriate .mbsyncrc block for the
channel. The block that is generated is shown below:
Channel groupName1-channelName1
Master :<accountName>-remote:<master-pattern>
Slave :<accountName>-local:<slave-pattern>
Channel groupName2-channelName2
Master :<accountName>-remote:<master-pattern>
Slave :<accountName>-local:<slave-pattern>
Each group must have a unique name, no matter which account it is
declared under. The same holds true for channels.
Using channels with the patterns set up this way allows one to specify
which maildir directories are to be synchronized FROM the master TO
the slave. In addition, it allows for these maildirs to be remapped,
between the master server and the local slave.
This is critical, because Gmail has a strange way of storing its mail
that makes using mbsync, mu, and mu4e more difficult.
There are additional channel parameters that are already present in
this codebase from the previous use of group-channel configuration,
which will be reused.
* mbsync: set the submodule's names field according to parameter
This is the same method as is used in creating an email account, named
`<name>` under `accounts.email.accounts.<name>`. This allows the user
to specify groups and channels, in a list-like format, but still gets
the "namespacing" to more easily handle the options available in each
of these locations.
* mbsync: provide examples of master/slave patterns for channels
* mbsync: create nested-let function to generate channel pattern
This pattern is required to either NOT be present, which means the
master pattern is used to match, or it has a list of patterns to use
beneath the master maildir to match against.
This function checks to ensure that if patterns is not empty, ONLY
then is the `Pattern` keyword printed. Otherwise, there are many, many
problems.
If there IS a list of patterns, then we use proper escaping methods to
ensure that the exact string is constructed.
* mbsync: per-account groups can have additional patterns
Gave the
`accounts.email.accounts.<name>.mbsync.groups.<gname>.channel.<cname>`
set a `patterns` option, which will allow for greater customization
and filtering of the master maildir to sync to the slave maildir.
* mbsync: add extraConfig option for easier-to-format options
These are options that can be handled by the `genSection` function in
the `genAccountFunction`, so they are left to the user to decide.
Most of these are made on a global basis anyways.
* mbsync: remove unneeded extraConfig.channel
This was originally placed here, seemingly, just to get this module
working. However, this field is actually more confusing now that a
separate per-channel configuration option for extra configurations has
been made available.
* mbsync: correct and improve comment in masterPattern description
* mbsync: switch channel/group generation to new functions
Changing this out is what moves us from the old system to the new one.
Instead of having a single channel manage a whole mailbox, we can now
specify an attribute set of groups that should correspond to an email
account.
Each of these groups contains an attribute set of channels that make
it up, and are grouped together for synchronization. In addition, each
of these channels can have additional IMAP4 parameters attached to
them to further refine synchronization.
Lastly, each of the channels is grouped together under the Group
section, ensuring that the channels' mailboxes synchronize as they
have been specified.
* mbsync: only generate group/channel configuration if channels present
Typically, when a group is specified, channels will be specified as
well. However, if due to error or mistake, the user forgets to specify
ANY channels for a group, we should not generate that group's
information.
This means that no channels are specified (which maps the remote
master to local slave). In addition, the `Group <gName>` block (which
brings the separate channels together) is also not generated.
Another thing to consider is that a user might specify a group and a
channel, but perform no additional configuration of the channel.
In a configuration, this would be realized by
`accounts.email.accounts.<aName>.mbsync.groups.<gName>.channels.<cName>;`
This creates the channel with the name `<cName>` and the
`masterPattern`, `slavePattern`, and `patterns` fields use their defaults.
By definitions set within mbsync, these defaults actually specify that
the remote master's `INBOX` mail directory is synchronized to the
local slave's `INBOX` directory.
So, if there is a channel that has no fields specified, then we DO
want to generate its configuration. But if there is a group that has
no channels, then we do NOT generate it.
* mbsync: acc comment explaining why groups attr set is never empty
* Revert "mbsync: remove unneeded extraConfig.channel"
This reverts commit 941c4771ca.
To support backwards compatibility, I need to leave this field/option
in the module, even if it will likely be more confusing to do it this way.
* mbsync: channel compatibility with previous iteration of mbsync
The previous version of mbsync used a single channel for an entire
account. This leads to issues when trying to change the mailbox
hierarchy on the local machine. The problem with this is that some
email providers (Gmail, among others) use a slightly different maildir
hierarchy, where the standard mailboxes (Inbox, Drafts, Trash, etc.)
are stored inside another directory (`[Gmail]/` in the case of Gmail).
This new version allows the user to specify any number of groups with
any number of channels within to reorder their mail however they wish.
However, to maintain backwards compatibility, I moved the original
channel-generating code to a function that will run ONLY when
there are no groups specified for THIS account.
* Revert "mbsync: channel compatibility with previous iteration of mbsync"
This reverts commit b1a241ff9f.
This function is in the wrong location and this was wrongly committed.
* mbsync: function for backwards compatibility with previous mbsync
NOTE THAT THIS IS THE CORRECT COMMIT FOR THIS CHUNK OF CODE!!
The previous version of mbsync used a single channel for an entire
account. This leads to issues when trying to change the mailbox
hierarchy on the local machine. The problem with this is that some
email providers (Gmail, among others) use a slightly different maildir
hierarchy, where the standard mailboxes (Inbox, Drafts, Trash, etc.)
are stored inside another directory (`[Gmail]/` in the case of Gmail).
This new version allows the user to specify any number of groups with
any number of channels within to reorder their mail however they wish.
However, to maintain backwards compatibility, I moved the original
channel-generating code to a function that will run ONLY when
there are no groups specified for THIS account.
* mbsync: function to choose which style of group/channels to generate
This is a simple if-check. If the old style is used, then this
account's mbsync.groups attribute set is empty. If that is the case,
then the old-style single-channel per account is used.
If that is NOT the case, then the new style is used in preference of
the old. This means that ALL channel code that would be generated by
the old version is replaced by the new one.
* mbsync: switch per-account config generation to check channels
* mbsync: program-wide groups if no account-specific groups
At the end, we have to choose whether or not to generate the old style
of having program-wide groups to specify things, where the boxes on
the channel underneath the group specifies which mailboxes to sync.
Here, we only generate the old style of group IF there is ANY account
that does NOT have the new `accounts.mbsync.groups` defined. At that
point, it is up to the user to ensure that the accounts in
`programs.mbsync.groups.{}` align with the name chosen for the
account, as I have made no attempt to change this old code.
However, if ALL accounts have their `mbsync.groups` defined, even if
each of the groups has a single empty channel, it will generate the
groups in the new style.
* mbsync: ensure \n after hm-generated comment
This was a multi-part fix. First, the `# Generated by Home Manager.`
comment has been reworked to ensure that it will ALWAYS have a
newline, even if the program-wide extraConfiguration is empty.
Next, we switched to placing 2 newlines between every account, to
provide further visual distinction between each account, which can
have multiple channels and multiple groups defined at the same time.
Lastly, the groupsConfig was slightly reworked, so that both the old
and new version can be used, but the new one will take precedence.
Because of this, groupsConfig is now a list of strings, which will
have single newlines inserted between each element.
But if the old style is NOT used, then the groupsConfig list
contains one element, an empty string. A single element has nothing
added as a separator, and an empty string produces no output.
* mbsync: only generate new group/channels if channels present
Here, the problem was if the user created a group for an account, but
did not also include a set of channels. If no channels have been
specified, then the group should NOT have its group-channel mapping generated.
I also corrected and improved the comment regarding
`genGroupChannelString`'s function and intended behavior.
* mbsync: channel patterns generate their own newlines
This means that when a channel has extra `patterns` defined for it, it
will generate those, and a single newline will be appended to the end
of that newly constructed string.
The moving of the newline character is slightly important because
otherwise, every account would receive an extra newline after every
channel, leading to 2 newlines after every channel.
* mbsync: place newline between each channel in a group
* mbsync: ensure old group/channel has proper spacing
This ensures that if the old style of generating program-wide groups
that there is the proper spacing before the group and in between each
line within the group.
* mbsync: ensure no empty channels present
If the user specifies a group correctly, they must still specify an
attribute set of channels. However, if they do not, then we need to
ensure that a group with no channels does NOT have any channel
configurations generated for it.
If there is a channel string generated for a channel that is empty,
then the `mapAttrsToList` returns a singleton list that contains just
the empty string. Thus, we can filter out all those results, to ensure
that no empty channels are generated.
It is important to keep in mind the difference between an empty
channel and a channel that has received no configuration, but is
named.
* A named channel is technically configured to have a name.
While the `masterPattern`, `slavePattern`, and `patterns`
field have NOT been populated, mbsync assumes that if
master/slave-Pattern are empty that means match against
`INBOX`.
If `patterns` is empty, no patterns are printed.
* An empty channel set is a set that has no channels within
it, but `mbsync.groups.<gName>.channels` is defined.
* mbsync: filter empty groups and correct newlines
First thing, someone can specify that a group is empty. If this is
done, technically a group with channels would be generated at the end.
However, because they were empty and did not exist, whitespacing would
be generated, leading to a usable, but mangled config file.
The `filter` solves this problem by removing empty strings (which are
generated by groups that are empty) from the output strings to place
in the file.
Lastly, because the whitespacing was fixed elsewhere in the file, the
crazy double-newline at the end was changed to a single newline.
However, the double newline within the `concatStringsSep` is still
required, because the list that is being concatenated together is a
list of channel configurations. Each element corresponds to one of the
groups specified, whose contents are the channels specified within.
The double newline is needed because each string element is lacking a
trailing newline, because `concatStringsSep` does not add the
separator to the end of the last element in the list. So, the last
channel to be configured will not have that newline appended when the
channel-configuration list is created, thus, 2 are inserted here.
* mbsync: update test input to use per-account channels
* mbsync: comment how old/new style collision handled
This is left in the test input for now, because I think it is useful
to see why certain things are happening the way they are.
* mbsync: update test output pattern
The test output should now have the correct configuration according to
the way I have specified it in the input file.
* mbsync: use format script on new code
* mbsync: add KarlJoad as maintainer
Co-authored-by: Nick Hu <me@nickhu.co.uk>
The apropos software is useful to get a list of manpages matching a
description or to get a list of all manpages. The latter feature is
used by Emacs to get manpage completion (`M-x man`).
To have apropos working, a database of all available manpages must be
built with mandb. This is what this commits does.
A similar change was done for NixOS:
edc6a76cc0
Running `zplug install` will always product output, even if there is
nothing to do.
Gating it behind a `zplug check` eliminates that output when there is
nothing to do, and is recommended in the zplug README.
Adds a new `keybindings` option to the `vscode` configuration.
It contains a list of key bindings, which will be written to
`%vscode-dir%/User/keybindings.json`.
PR #1351
The previous implementation would allow variables to sneak into the
file names. This commit makes sure the resulting target file path
exactly matches the expected path.
The kakoune editor has a plugin mechanism and several plugins are
already packaged under `pkgs.kakounePlugins`. However, adding these
packages to `home.packages` is not enough: the `kakoune` package needs
to be configured with the list of plugins to include, so that they get
sourced on start-up.
We add a `programs.kakoune.plugins` option, analogous to
`programs.vim.plugins`.
The change is backwards compatible since `pkgs.kakoune` is defined as
wrapKakoune kakoune-unwrapped { };
and `wrapKakoune` defaults the list of plugins to empty.
PR #1356
The git-send-email [0] script uses StartTLS if `smtpEncryption` is set
to `tls`, which can break services that don't support StartTLS.
[0]: bd42bbe1a4/git-send-email.perl (L1533)
PR #1395
We were passing the separators for the `show-whitespaces` highlighter
verbatim. This was problematic in case one wanted to use, spaces,
quotes or `%` as separators since the resulting kakoune configuration
would be invalid.
According to kakoune's docs, the separator has to be one character
long, so we can use a simple rule for escaping them. It is possible
that people has been working this around by passing, e.g. `"' '"` as
separator in order to get a space (i.e., escaped explicitly by the
user), so we just let longer strings be used verbatim.
PR #1357
Instead of using several regex assertions, just state precisely what we
are producing. While the regex was technically more flexible, since it
would ignore differences in whitespace, it was also harder to read/edit.
This test started failing as described in the code comment. May be
related to Nixpkgs updating Fontconfig from version 2.12 to 2.13. See
https://github.com/NixOS/nixpkgs/pull/73795.
The option to remove the default keybindings by setting the
`programs.qutebrowser.enableDefaultKeybindings` variable to `false`
had a list wrapped around the `config.py` line. This would cause a
type coercion error.
PR #1410
Emacs populates 'exec-path' at launch from the 'PATH' environment
variable. Likewise, the emacs derivation from nixpkgs populates
'load-path' from the 'NIX_PROFILES' variable. As neither of these are
available by default in the systemd user manager, revert to the
previous behavior of launching the Emacs daemon from a login shell.
Fixes#1354Fixes#1340
PR #1355
Add 'services.emacs.socketActivation.enable' for generating an
'emacs.socket' systemd unit.
Emacs since version 26 has supported socket activation, whereby an
external process manager such as systemd listens on a socket and passes
it to the Emacs daemon when the manager launches it. This improves
startup time of the user session and avoids launching the daemon when not
needed, for example when launching the user session via SSH.
This implementation hard-codes the socket path to the default for the
version of 'programs.emacs.finalPackage', because systemd does not
perform shell expansion in the socket unit's 'ListenStream' parameter
and it seems like an advanced use-case to change the socket path. Shell
expansion would be desirable as the socket path usually resides in
directories such as $XDG_RUNTIME_DIR or $TMPDIR.
Tests were added to verify behavior in the following cases:
- Emacs service with socket activation disabled
- Emacs 26 with socket activation enabled
- Emacs 27 with socket activation enabled
PR #1314
Using this function it is possible to make `home.file` create a
symlink to a path outside the Nix store. For example, a Home Manager
configuration containing
home.file."foo".source = config.lib.file.mkOutOfStoreSymlink ./bar;
would upon activation create a symlink `~/foo` that points to the
absolute path of the `bar` file relative the configuration file.
PR #1211
Before the XDG variables would be set from the user's environment, if
available. This would break some tests.
With this change the tests should be fully deterministic.
Fixes#1190
This switches the type of `matchBlocks` from `loaOf` to `listOrDagOf`.
The former has been deprecated in Nixpkgs. The latter allows
dependencies between entries to be expressed using the DAG functions.
Add 'services.lieer', which generates systemd timer and service units
to synchronize a Gmail account with lieer. Per-account configuration
lives in 'accounts.email.accounts.<name>.lieer.sync'.
Add 'programs.lieer', a tool for synchronizing a Gmail account with a
local maildir and notmuch database. Per-account configuration lives in
'accounts.email.accounts.<name>.lieer'.
This allows the ability to provide arguments to a function, such as
`--on-event` in order to trigger a function on the
`fish_command_not_found` event, for example.
PR #1063
When setting values using the `git config --set` command, git formats
the file a bit differently. This changes the output so it maps to that
format.
Differences:
* each `key = value` in a section is prefixed by a tab character
* the `=` between the key and the value is surrounded by spaces
PR #1069
- If a function is defined, check that the function file exists and
that the contents matches a given string.
- If no functions exists, the functions folder should not exist.
- Verify plugin functionality.
This resolves the error
The option `accounts.email.accounts.xyz.neomutt.sendMailCommand`
is defined both null and not null, in
`…/home-manager/modules/accounts/email.nix' and
`…/home-manager/modules/accounts/email.nix'.
that would occur previously when both neomutt and msmtp were enabled
for an account.
This change makes use of the `extend` function inside `lib` to inject
a new `hm` field containing the Home Manager library functions. This
simplifies use of the Home Manager library in the modules and reduces
the risk of accidental infinite recursion.
PR #994
Given an inner type, the former function generates a type that expect
DAG option values. The latter function is only present to temporarily
allow the `programs.ssh.matchBlocks` to keep accepting list values.
- Default value is set to static '$HOME/.zsh_history' -- dotDir is not
prepended anymore
- $HOME is not prepended to the option value
- Ensure history path directory exists
Fixes#886, replaces #427.
This replaces some derivation outputs by simple strings rather than
full Nix store paths. This removes the need to download the whole
derivation when all we need is a static string.
The [throw-keyids](https://www.gnupg.org/gph/en/manual/r2110.html)
option "hides the receiver of the encrypted data as a countermeasure
against traffic analysis." However, it also slows down decryption, and
even breaks some applications; see e.g.
https://github.com/open-keychain/open-keychain/issues/626
I think the sane default would be to leave it off, just as it is off
by default in gpg. The typical user will probably not need this level
of security, and will probably prefer a better user experience (faster
decryption and compatibility with a wider range of applications).
Closes#838
This makes the
programs.firefox.package
option take a pre-wrapped Firefox package as value if state version is
set to "19.09" or later. This should make the Firefox module work with
a wider range of Firefox packages.
