The release notes used to be an appendix in the manual. After
converting to markdown that appendix got lost. This commit
reintroduces the release notes into the manual.
Add the option sourceFirst to the hyprland module. When this option is
enabled source entries will be put near the top of the file, so that
the variables declared in other files can be used by the other
configuration entries.
Add "source" to the list of important prefixes when the former option
is enabled.
Resolves#4729
The `nixos-render-docs` tool outputs XHTML formatted content. In
order to convince browsers like `firefox` to treat the data as XHTML
the extension must be `.xhtml` and not `.html`.
Using the XHTML-formatted content as HTML is mainly an issue with
self-closing `<a />` tags.
Previously, users cannot enable boolean flags like `--show-all` in bat's
config since all options were expected to be either a string, or a list
of strings. With this commit boolean flags are simply appended to the
end of the config if they are set to `true`, and discarded otherwise.
For example, the config
{
theme = "TwoDark";
show-all = true;
lessopen = false;
}
would produce a config file that looks like
--theme='TwoDark'
--show-all
Fixes#4657
Occasionally, swayidle crashes with a failure to connect to the
Wayland session. Ideally, swayidle should automatically restart
instead of leaving the system in a vulnerable state.
Due to the defaults in `systemd.user.settings`, the default value when
there are no settings explicitly set is `{ Manager = { }; }`. This
means an empty file is created even when `systemd.user.settings` is
never used in home-manager configuration. Since user’s `user.conf` is
preferred to the global `/etc/systemd/user.conf`, this can cause any
values set in the latter to be discarded.
The `systemd.user.extraConfig` provides a way to generate a
`systemd-user.conf(5)` file for the user.
This is the home-manager equivalent of NixOS’s option of the same
name, with the difference that NixOS’s option generates a `user.conf`
file that is shared between all users.
This commit changes the config format of repositories to the
soon-be-expected `{ "path": "repository-path", }`. The Home Manager
configuration allows a simple string (which will get translated), the
new format by directly using the path attribute, and the one with the
optional label attribute. More information about the background can be
found here https://torsion.org/borgmatic/docs/reference/configuration/
* k9s: add hotkey option
This PR adds an option to customise k9s hotkeys.
The keyword `hotKey` must be in camel case on the user config.
* Update modules/programs/k9s.nix
Co-authored-by: Paul Meyer <49727155+katexochen@users.noreply.github.com>
* fix formatting
---------
Co-authored-by: Paul Meyer <49727155+katexochen@users.noreply.github.com>
When xdg.enable is set, aerc uses the $XDG_CONFIG_HOME variable instead
of the default $HOME/Library/Preferences. home-manager needs to check
this to make sure aerc can find the proper file in both cases.
When a process inside the sxhkd scope is OOM killed, if the OOM policy
is set to `stop` then the sxhkd scope itself will exit, terminating
every process launched from the keyboard.
This is undesirable, set it to `continue` instead to keep other
processes running.
The configuration file format of borgmatic has changed in version
1.8.0:
https://projects.torsion.org/borgmatic-collective/borgmatic/src/branch/main/NEWS
This commit makes Home Manager generate borgmatic's configuration file
using the new format.
Even though the NEWS file indicates that old configuration files are
compatible, this is not 100% the case: empty sections work fine in old
borgmatic but stop working in new ones. I've reported the bug upstream
by email as I couldn't create an account on the forge.
Specifically, allow variable expansion for the key codes by switching
from single to double quotes.
This also adds a helpful suggestion to descriptions. Taken from the
project's README, see
4abed97b6e/README.md (L71-L74))
Allows users to customize which environment variables to import in DBus
and SystemD user environments, and to specify which commands will be run
after the environment activation.
The way the `bat` module is currently written makes it essentially
impossible to use themes and syntaxes without IFD, since you must
provide the contents as string, instead of just giving a path to be
linked.
With this change, setting themes/syntaxes by-string will start issuing
warnings, and a new attribute model is added, lightly inspired by how
`programs.zsh.plugins` avoided this issue.
For some reason, Firefox completely discards the ADD_DATE and
LAST_MODIFIED attributes if they are set to 0. This has been
confirmed by exporting a sample set of bookmarks generated by
Nix using home-manager and comparing it to the same sample of
bookmarks set manually and then exported.
Missing these attributes can cause problems for extensions and
other tools that try to read bookmarks. A known example is the
Tridactyl extension.
Fixesnix-community/home-manager#4488
The default config for sway generates a bar block with tray_output primary. But wayland (or sway, take your pick?) has no concept of a primary display so this just results in no tray anywhere.
A better default is "*" which puts the tray on every monitor, since sway can do so without issue.
Signed-off-by: Sefa Eyeoglu <contact@scrumplex.net>
Adds a programs.rio module to control Rio installation and configuration, a gpu accelerated terminal
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Don't try to validate a limited set of hardcoded options, instead just
convert them as-is. Now, users can keep all their options in a single
attribute set, including arbitrary `user_{option}`s which was impossible
to express with a hard-coded submodule. As a plus, there is also less
maintainence burden.
* gh: option to enable helper for additional hosts
`gh` can also be used with github enterprise
hosts, for which there exists no easy option
to enable the credential helper except for
directly working with `programs.git.extraConfig`.
Not sure if this is a needed addition since it's
somewhat niche, at the same time it's not very
complex and makes the life of github enterprise
a little easier.
* gh: update credential-helper tests
* gh: refactor credential helper option
this moves from `enableGitCredentialHelper` to
`gitCredentialHelper.enable` and
`gitCredentialHelper.hosts`.
* gh: lib.mkIf -> mkIf
- On darwin, creates a launch agent to run git-sync on an interval and
when the `path` changes.
- The `uri` option is not used on Darwin. The auto-creation of the
local git directory from the `uri` is a feature of the
git-sync-on-inotify [1] wrapper (which won't work on Darwin afaik)
and not `git-sync` itself.
[1] https://github.com/simonthum/git-sync/blob/master/contrib/git-sync-on-inotify
* hyprland: prioritize variables and beziers
The `settings` key now handles `$variables` and `bezier`s differently,
putting them at the top of the file.
Also, proper indentation has been implemented.
* Update modules/services/window-managers/hyprland.nix
Co-authored-by: Naïm Favier <n@monade.li>
* hyprland: add animations & beziers test
---------
Co-authored-by: Naïm Favier <n@monade.li>
These (and the `*MD` functions apart from `literalMD`) are now no-ops
in nixpkgs and serve no purpose other than to add additional noise and
potentially mislead people into thinking unmarked DocBook documentation
will still be accepted.
Note that if backporting changes including documentation to 23.05,
the `mdDoc` calls will need to be re-added.
To reproduce this commit, run:
$ NIX_PATH=nixpkgs=flake:nixpkgs/e7e69199f0372364a6106a1e735f68604f4c5a25 \
nix shell nixpkgs#coreutils \
-c find . -name '*.nix' \
-exec nix run -- github:emilazy/nix-doc-munge/98dadf1f77351c2ba5dcb709a2a171d655f15099 \
--strip {} +
$ ./format
This process was automated by [my fork of `nix-doc-munge`]. All
conversions were automatically checked to produce the same DocBook
result when converted back, modulo minor typographical/formatting
differences on the acceptable-to-desirable spectrum.
To reproduce this commit, run:
$ NIX_PATH=nixpkgs=flake:nixpkgs/e7e69199f0372364a6106a1e735f68604f4c5a25 \
nix shell nixpkgs#coreutils \
-c find . -name '*.nix' \
-exec nix run -- github:emilazy/nix-doc-munge/98dadf1f77351c2ba5dcb709a2a171d655f15099 \
{} +
$ ./format
[my fork of `nix-doc-munge`]: https://github.com/emilazy/nix-doc-munge/tree/home-manager
The NixOS variant of Markdown doesn't make a distinction between
`<code>` and `<literal>` or `<quote>` and... quotes, and doesn't
support `<parameter>` or `<replaceable>`. These are infrequently used
(apart from `<code>`) and don't add much, so just convert them to
simpler forms to allow the options containing them to be converted
to Markdown automatically.
A few minor syntactic adjustments were also made to make
`nix-doc-munge`'s job easier.
Previously, lines in .zshrc were added with quotes in keys
(e.g. ZSH_HIGHLIGHT_STYLES['comment']='fg=#6c6c6c'). However, zsh
considered these quotes to be part of the key, so the "comment" key
remained unchanged.
* aerc: fix per-account extraConfig section names
The aerc configuration file `aerc.conf` can contain 10 different
sections, but only the UI section supports what the aerc manual calls
contextual configuration. This works by appending to the section heading
either `:account=name` or `:folder=bar`.
The aerc-accounts module, however, applied `mkAccountConfig` to each
section heading declared in
`config.accounts.email.accounts.<name>.aerc.extraConfig.*`. This means
home-manager will generate files with `[general:account=default]` and
the options will not be recognized by aerc.
To address this, and since it doesn't make sense for other sections to
only be under a single account's scope, an assertion has been added
to confirm that only sectons that support contextual config (i.e.,
only the UI section) is declared.
This also addresses confusions like declaring
`accounts.email.accounts.*.aerc.extraConfig.general.unsafe-accounts-conf
= true` and triggering a warning message because
`programs.aerc.extraConfig.general.unsafe-accounts-conf` was unset.
This commit also updated documentation throughout the aerc modules to
be in line with this change, and fixed minor typos/formatting therein.
Co-authored-by: Genevieve <genevieve@sunlashed.garden>
* aerc: make assertion plaintext and add test case
This commit adds a test case to check both the warning on unset
`unsafe-accounts-conf = true` when aerc accounts are configured
with Nix, and the new assertion when per-account configuration
contains unsupported subsections (i.e. general).
It also fixes minor formatting issues and typos.
As pointed out in #3291, using the XDG symlink means the agent/unit
files don’t change when the contents of the config changes, and so the
service will not be restarted.
Nushell has the option to source from the login.nu file in the case
that nushell is used as a login shell. This commit adds the login file
alongside the existing config and env files as another configuration
option.
Previously, IMAP was preferred over notmuch, even if notmuch was
configured, causing problems with setting account flavor (which
automatically sets IMAP settings). The new backend order is:
notmuch > IMAP > maildir
This also fixes the notmuch DB path being set to the wrong location.
The notmuch DB is located at the maildir base path, not in each
account's maildir.
* imapnotify: expose package (and exe) options
There are multiple packages that provide an imapnotify interface. Those
packages have differently named executables. This can now be customized.
This change also means test configurations can use stub packages.
* imapnotify: use/create config in configHome
Exposing the configuration file makes testing imapnotify configurations much
easier. It also allows for golden tests in home-manager.
* imapnotify: extend with launchd agent
Now that home-manager supports launchd agents, the imapnotify service
can be configured (and enabled) for darwin. The configuration matches
that of the linux/systemd version. In particular, by not setting a
`UserName`, this runs as the user whose configuration includes the
module.
Due to the launchd `Program` implementation (it must take an absolute
path) it is not possible to use that for the program and stub the path
in tests. Instead, this uses `ProgramArguments` for the program name.
The `ThrottleInterval` is equivalent to `RestartSec`. `KeepAlive` is
equivalent to `Restart`.
The `ExitTimeOut` default is 20 seconds, but goimapnotify should not
time out — this is achieved by setting the `ExitTimeout` to 0.
* imapnotify: add launchd plist test
This only tests the generated plist (which is new), not the original
systemd implementation, nor the json config file.
(Note the lack of a newline at the end of the plist file.)
This will reduce the system closure size by about 200MB under NixOS by
sharing the glibcLocales package.
When home-manager is installed on Linux without the NixOS module, all
glibc locales are installed, as before.
Resolves: #2333
We can't test for the whole contents of the config file because that is
out of our control and may change unexpectedly. Only check for the
settings we know should be set.
Starship has an advanced, experimental feature where fancy stuff in the
prompt can be replaced with something more simple after the command is
ran. This is very helpful for copy and pasting shell history somewhere
else.
docs: https://starship.rs/advanced-config/#transientprompt-and-transientrightprompt-in-fish
Fish is currently the only shell as far as I can tell that both
home-manager and starship support for this feature. Since the function
has to be called after starship is loaded, this seems like the best
place to put it.
format
* aerc: add space after definitions
* aerc: only generate files, if options were set
* aerc: improve file permission warning
* aerc: remove redundant access to builtins
* aerc: allow overwriting of derived values
the order of merging the config subsets did not allow the user to specify
outgoing, source and password command values,
if they were previously derived from the SMTP, IMAP, Maildir etc config.
The values from `account.<name>.extraAccounts` now have the highest precedence.
Appropriate tests were added as well.
* aerc: write primary account first
* sway: add support for XDG autostart using systemd
Using the option wayland.windowManager.sway.systemd.xdgAutostart, users
can now choose to start applications present in
$XDG_CONFIG_HOME/autostart when starting their sway session.
This change also renames wayland.windowManager.sway.systemdIntegration
to wayland.windowManager.sway.systemd.enable;
Signed-off-by: Sefa Eyeoglu <contact@scrumplex.net>
* sway: add Scrumplex to maintainers
Signed-off-by: Sefa Eyeoglu <contact@scrumplex.net>
---------
Signed-off-by: Sefa Eyeoglu <contact@scrumplex.net>
* boxxy: add module
* boxxy: added nikp123 to maintainers list
* boxxy: use mkPackageOption instead for the package
Co-authored-by: Naïm Favier <n@monade.li>
* boxxy: use yaml generator instead of json
Co-authored-by: Naïm Favier <n@monade.li>
* boxxy: various fixes
* boxxy: various fixes (part 2)
* boxxy: various fixes (part 3)
* boxxy: various fixes (part 4)
forgot to run ./format, whoops
* boxxy: use literalExpression for the rewrite example
Co-authored-by: Naïm Favier <n@monade.li>
* boxxy: add news entry
---------
Co-authored-by: Naïm Favier <n@monade.li>
* Fix espanso module to work with 2.x version
* espanso: fix espanso module
This module is currently broken. It does not create `config` and `match` folders which are required by espanso 2.x version.
This PR fixed this issue and support creating multiple files under `config` and
`match` folder.
* Espanso: fix espanso module
This module is currently broken. It does not create `config` and `match` folders which are required by espanso 2.x version.
This PR fixed this issue and support creating multiple files under `config` and `match` folder.
Add descriptions
* Add versionAtLeast and mkRemovedOptionModule
* Correct maintainers list
* remove config key from example
* format basic-configuration.nix
* Update modules/services/espanso.nix
Co-authored-by: Naïm Favier <n@monade.li>
* fix maintainers list
---------
Co-authored-by: Naïm Favier <n@monade.li>
Setting `outputSpecified` prevents `getOutput` from descending into
outputs, which don't have an overridden `outPath`.
Additionally, use `__spliced` to permit derivations to use the dummy as
an input.
Make use of the recently added nullable `mkPackageOption` feature
to disable installing an SSH client by default: most people should use
the client provided by their system.
Kitty provides integrations for bash, fish and zsh. The new
programs.kitty.shellIntegration options allow the configuration of
these integrations.
See <https://sw.kovidgoyal.net/kitty/shell-integration> for more details.
Signed-off-by: Sefa Eyeoglu <contact@scrumplex.net>
* zellij: adds options to integrate with zsh, bash and fish shells
* zellij: add tests for shell integration options
* zellij: eval setup auto start for fish integration
* zellij: use interactiveShellInit for fish integration
* zellij: fixes format issues
* zellij: enable shell integrations by default
* zellij: compresses shell integration test cases
* zellij: removes the disabled shell integration tests
* zellij: formats tests
