This will cache the output of `passwordCommand` per authentication
realm.
Context: the `credentials` key in `sbt` is a `TaskKey[Seq[Credentials]]`.
In `sbt`, tasks are evaluated on-demand and their output is not cached.
This particular key is referenced by all submodules in a project. When
the command is relatively expensive (e.g.: `pass show foo`), this
results in several seconds of delay when doing basic things like
`compile` or `test` which makes this unusable without some kind of
caching.
sbt allows overriding the default repositories to use to resolve
dependencies. This is often used with proxies and/or private
repositories to host internal packages.
This change adds a `repositories` attribute to `sbt` to allow
specifying the values that will go in `~/.sbt/repositories` file.
To support the above change we also deprecate the `baseConfigPath`
option in favour of `baseUserConfigPath` which points one level higher
by default. This allows not using relative paths to refer to the
top-level configuration directory.
Also adds tests for the new option and the deprecation of the previous
one.
At commit [5666e6b9](5666e6b9fb),
broot refactored the content of the file `/resources/default-conf.hjson`
into multiple files under the directory `/resources/default-conf`, using
[`imports`](5666e6b9fb/resources/default-conf/conf.hjson (L152-L165))
to refer to other configurations.
This refactoring is effective since version 1.14.0 of broot.
After this refactoring, in `xdg.configFile.broot` (which defaults to
`~/.config/broot`):
- we need to copy all potentially referenced files (all files under
`resources/default-conf`),
- except we need to leave out `conf.hjson` which conflicts with the
`conf.toml` generated by home-manager (because broot [accepts both conf.toml and conf.hjson](https://dystroy.org/broot/conf_file/))
To implement this, we use `symlinkJoin` to create the content of
`xdg.configFile.broot` by merging multiple sources.
* broot: use freeformType for config
* broot: use defaults from upstream
closes#2395
* broot: generate shell function
* broot: add @dermetfan to CODEOWNERS
* broot: rename `config` option to `settings`
* broot: make example more idiomatic
Co-authored-by: Nicolas Berbiche <nic.berbiche@gmail.com>
Co-authored-by: Nicolas Berbiche <nic.berbiche@gmail.com>
We change the current logic: instead of writing an init.vim which loads
lua/init-home-manager.lua, we write an init.lua that sources init.vim
This commit also avoids writing any of these files if the plugins have
no config.
Some configuration options can take space separated strings; for
example `SSLVersions` can be configured with multiple allowed
versions.
SSLVersions TLSv1.3 TLSv1.2
This can now be represented in Home Manager.
SSLVersions = [ “TLSv1.3” “TLSv1.2” ];
In implementing this change, it uses oneOf for config type, as it is a
cleaner way to represent the union than the nested eithers
formulation.
Also add SSLVersions to test lists of strings in
`account.extraConfig`.
If the user has enabled the XDG user directories module then we can
use the XDG music directory in the MPD module. Otherwise we'll leave
the option undefined so that the user is forced to define the
directory to use.
This applies to state version 22.11 and above.
Fixes#3225
Instead of referencing the `HOME` environment variable, use the
`home.homeDirectory` option. This allows other modules to reference an
XDG user directory without having to support shell syntax.
Units with
Install.RequiredBy = [ target ]
set will now be linked in the
${target}.requires
directory. Similar to how `Install.WantedBy` already causes a link in
the
${target}.wants
directory.
The `tag.gpgSign` config option was added in Git 2.23.0 and seems like
it should be set in addition to `commit.gpgSign` when
`programs.git.signing.signByDefault` is enabled
The GNU Privacy Guard 2.3 man page for `gpg-agent` describes the
`--grab` and `--no-grab` options as follows:
> Tell the pinentry to grab the keyboard and mouse. This option should
> be used on X-Servers to avoid X-sniffing attacks. Any use of the
> option --grab overrides an used option --no-grab. The default is
> --no-grab.
Therefore Home Manager should explicitly output `grab` when
`cfg.grabKeyboardAndMouse` is true. Previously Home Manager emitted
`no-grab` when `cfg.grabKeyboardAndMouse` was false.
PR #3192
everything is now covered by other settings that are more user friendly
than this big opaque attrset.
Also 'configure' wont do anything with nixpkgs-unstable the way HM
configures neovim. so no need to keep it, the deprecation warning is > 1
year old.
This adds support for configuring email accounts, with automatic smtp, imap,
sendmail (msmpt) and maildir (mbsync, offlineimap) setup in aerc,
via `accounts.email`.
The XDG Desktop Entry spec mentions that multiple values per key may be
optionally terminated by a semicolon. An example for this is the Firefox
desktop file, which has no trailing semicolon. This breaks the sed regex
used in `mimeAssociations`.
Fix the regex by matching the end of string, optionally preceded by a
semicolon, or any other semicolon. This makes it work with both
semicolon-terminated and non-semicolon-terminated desktop files.
In the scenario where some XDG user directory is a symlink defined by
`home.file`, we want the symlink to be created before we try to
`mkdir -p` that directory, as it will then silently succeed. On the
other hand, if we create the directory first, creating the symlink
will fail.
We lose nothing by doing this as `linkGeneration` creates the
directories it needs.
This patch follows a similar patch[1] in nixpkgs. With this patch,
fish can complete manpages for programs installed through
home-manager, e.g., using home.packages.
[1]: https://github.com/NixOS/nixpkgs/pull/91794
Specifically,
- directly export `modules/lib/dag.nix` instead of renaming
attributes,
- run through utilities to reuse code where possible,
- expose `lib.hm.dag.isEntry` and reuse it in
`modules/lib/types-dag.nix`,
- reuse utilities through `lib` set instead of passing imports to
functions, and
- eta reduction of `map`, `entryAnywhere`, `entryAfter` and
`entryBefore`.
bash and zsh apparently handle command substitution slightly differently
than fish. in bash/zsh:
$ export FOO=x
$ FOO=y echo $(sh -c 'echo $FOO')
x
whereas in fish:
$ export FOO=x
$ FOO=y echo $(sh -c 'echo $FOO')
y
so we have to assign $SHELL within the substitution for bash and zsh.
The `services.picom.opacityRule` option was renamed to
`services.picom.opacityRules`.
This was missed in #2939
Signed-off-by: Sumner Evans <me@sumnerevans.com>
swayidle executes commands using "sh -c" and so its PATH must contain
a shell. This adds such PATH entry to the environment of the systemd
service.
Fixes#2811.
Removes the `uniq` constraint on `after` and `before` so that we can
merge multiple definitions for the same DAG entry:
{
dag = mkMerge [
{
foo = lib.hm.dag.entryBefore [ "bar" ] {
# definition 1
};
}
{
foo = lib.hm.dag.entryBefore [ "qux" ] {
# definition 2
};
}
{
foo = {
# definition 3
};
}
];
}
In this example `foo` will come before `bar` and `qux`.
This brings a few advantages:
- Use of float instead of strings to represent float values,
- Use of structure settings, and
- Better type checking for some settings
Also add thiagokokada as codeowner of picom.
Adds option settings, which writes settings to
.config/udiskie/config.yml.
Note, the option takes precedence against other options like notify,
automount or tray if they are configured in settings.program_options.
Per the [docs], MCFLY_FUZZY is no longer a boolean, taking now a
positive integer that controls the fuzziness factor.
[docs]: https://github.com/cantino/mcfly#fuzzy-searching
Co-authored-by: Robert Helgesson <robert@rycee.net>
mujmap is a tool that synchronizes mail between a mail server and
notmuch via JMAP. It's very similar to lieer, so I heavily based the
implementation of the notmuch module on lieer's. I did not include an
equivalent to lieer's periodic synchronization service, however,
because I plan to soon introduce a daemon mode to mujmap.
https://github.com/elizagamedev/mujmap
The user should always explicitly set the state version they wish to
use. Indeed, the configuration generated by the Home Manager install
script has set this option for a long time. This removal should
therefore not affect many users.
Add services.emacs.startWithUserSession boolean to indicate that Emacs
must be started with the systemd user session. This is true by default
unless socket activation is also true.
In the past, the user had to choose between socket activation (to get
the Emacs service started when the user uses emacsclient) and
immediate start with the user session. When choosing immediate start
over socket activation and if the Emacs service is stopped at some
point, using emacsclient would start a new Emacs daemon but the
service would still be turned off. This situation would prevent
`home-manager switch` from completing successfully because it wouldn't
be able to start the Emacs service as Emacs is already running.
This new setting makes it possible to have both socket activation and
immediate start at the same time. In this scenario, Emacs is started
with the user session and, after the Emacs service is stopped, using
emacsclient starts the service again.
This new settings also makes it possible to have neither socket
activation nor immediate start.
Currently translated at 100.0% (14 of 14 strings)
Add translation using Weblate (Catalan)
Co-authored-by: Leix b <abone9999@gmail.com>
Translate-URL: https://hosted.weblate.org/projects/home-manager/modules/ca/
Translation: Home Manager/Home Manager Modules
* Add flake.lock and clean up flake.nix
Add a lockfile to work around https://github.com/NixOS/nix/issues/6541
(and because it's a good idea anyway).
Also use flake-utils, and restrict ourselves to the five platforms
supported by nixpkgs. Otherwise, the IFD for nmd fails on weird
platforms. This fixes `nix flake check`.
Remove the redundant `apps` output, see https://github.com/nix-community/home-manager/pull/2442#issuecomment-1133670487
* nixos,nix-darwin: factor out into a common module
* nixos,nix-darwin: make `home-managers.users` shallowly visible
Make sure the option is included in the NixOS/nix-darwin manual (but the
HM submodule options aren't).
Also add a static description to the HM submodule type so that we don't need to
evaluate the submodules just to build the option manual. This makes
nixos-search able to index the home-manager flake.
Also clean up some TODOs.
* flake: add nmd and nmt
This avoids having to use `pkgs.fetchFromGitLab` in an IFD, which causes
issues when indexing packages with nixos-search because `pkgs` is
instantiated with every platform.
The `getmail` package will soon be removed from nixpkgs. The
`nixos-unstable` channel already has it removed and using the service
will result in:
error: getmail has been removed from nixpkgs, migrate to getmail6
Upgrade to the getmail6 package which is already available and backwards
compatible.
