- Default value is set to static '$HOME/.zsh_history' -- dotDir is not
prepended anymore
- $HOME is not prepended to the option value
- Ensure history path directory exists
Fixes#886, replaces #427.
The [throw-keyids](https://www.gnupg.org/gph/en/manual/r2110.html)
option "hides the receiver of the encrypted data as a countermeasure
against traffic analysis." However, it also slows down decryption, and
even breaks some applications; see e.g.
https://github.com/open-keychain/open-keychain/issues/626
I think the sane default would be to leave it off, just as it is off
by default in gpg. The typical user will probably not need this level
of security, and will probably prefer a better user experience (faster
decryption and compatibility with a wider range of applications).
Closes#838
This change allows to pass custom packages into the `vim.plugins`
option.
Additionally this adds a deprecation warning and an error message if a
vim plugin is not present. This is an improvement because the user
gets instant feedback, when a plugin is not found.
This makes the
programs.firefox.package
option take a pre-wrapped Firefox package as value if state version is
set to "19.09" or later. This should make the Firefox module work with
a wider range of Firefox packages.
enableCompletion option not only calls compinit but also adds
nix-zsh-completions package to home.packages which should still happen
even if oh-my-zsh is enabled.
The double compinit call will still be eliminated by moving guarding condition
down to the compinit call itself.
Fixes#771.
This patch started by addresssing the code review comments to close
https://github.com/rycee/home-manager/pull/290. However initiating a new
pull request it became clear, that home-manager changed significantly
since then.
This changes the initial pull request to be consistent with the email
account management in home-manager now. It also adds a simple test and support
for multiple accounts.
Because `extraPackages` and `overrides` expect functions as values it
has not been possible to perform merges. This adds suitable types for
these options that allow reasonable merging.
Unfortunately, using `attrsOf` is not possible since it results in too
eager evaluation. In particular, the
home.sessionVariables = {
FOO = "Hello";
BAR = "${config.home.sessionVariables.FOO} World!";
};
example will cause an infinite recursion.
This commit restores the option type of
- `home.sessionVariables`,
- `pam.sessionVariables`,
- `programs.bash.sessionVariables`, and
- `programs.zsh.sessionVariables`
to `attrs`. It also adds test cases for the above options to avoid
regressions.
Fixes#659
This removes the `nixosSubmodule` option in favor of a new option
`submoduleSupport.enable`. This name better indicates that the
submodule mode applies to both NixOS and nix-darwin.
Makes fish use global scope for abbreviations.
This makes it so that they don't stick across config changes.
Before, an abbreviation would still exist even if removed from the config.
This patch allow to define custom msmtp options per email account. For
example: to change the "auth" method from "on" to "login", add
`msmtp.extraConfig.auth="login"`.
Add option "extraLocalVars" for additional local variable definitions
in .zshrc, at the top of the file.
Some zsh plugins/themes expect configuration in local variables before they
are loaded (example: https://github.com/bhilburn/powerlevel9k). Exporting
those clutters the environment and is unnecessary.
Use the new module lib.zsh to generate export statements in zsh syntax, using
zsh arrays for lists.
Being a zsh script, this seems more intuitive for .zshrc
Instead of using the hostname `%h`, which can be changed by the
~/.ssh/config file, use the commandline-given hostname `%n`.
This allows to alias a host with different hostnames, which then point
to different configurations. A common use-case for this is if you have
multiple accounts on github with each access to different private repos:
Host github.com
IdentitiesOnly yes
User git
IdentityFile ~/.ssh/id_rsa
Host customer.github.com
IdentitiesOnly yes
User git
IdentityFile ~/.ssh/customer
HostName github.com
Without this change, if a connection was established with the first
github.com alias, then the user would try to pull a repo from the second
account, ssh would re-use the SSH connection which doesn't have access
to that repository.
This commit adds the tmux program to Home Manager.
In addition to configuring tmux, a user may specify tmux plugins from
Nixpkgs. These can be included in the list of `plugins` and can either
be a package (all tmux plugins live under `nixpkgs.tmuxPlugins.*`), or
an object which includes the plugin and an `extraConfig`, which will
be run immediately after sourcing the tmux plugin.
Finally, this commit introduces two nested programs which may be
enabled which depend on tmux: tmuxp and tmuxinator. These do not have
the ability to be configured, although this may be a future
contribution.
This reverts the commits
- "alot: change msmtp default command"
8e798e4c28
- "astroid: init"
736e340bde
because they include changes that break some configurations and some
options that are misplaced.
To allow supporting more advanced configurations. The local refers to
the "maildir store" configuration, remote to the "IMAP store", and
"channel" to the channel.
This allows you to specify your own custom commands
to be run when calling fzf. You might use tools like
fd to search faster and take `.gitignore` files into
consideration.
This reworks the way program specific email account options are
specified. In particular, we no longer use the deprecated `options`
field of `mkOption`. Instead submodules are used.
This is needed to support overriding these options inside match
blocks. A new option `programs.ssh.extraOptionOverrides` has been
added to allow global overrides.
The preferred method of theming rofi is now to use "rasi" theme files.
This commit therefore downplays the colors option and introduces the
theme option.
This is a NixOS module that is intended to be imported into a NixOS
system configuration. It allows the system users to be set up directly
from the system configuration.
The actual profile switch is performed by a oneshot systemd unit per
configured user that acts much like the regular `home-manager switch`
command.
With this implementation, the NixOS module does not work properly with
the `nixos-rebuild build-vm` command. This can be solved by using the
`users.users.<name?>.packages` option to install packages but this
does not work flawlessly with certain Nixpkgs packages. In particular,
for programs using the Qt libraries.
Very simple module for hg based on programs.git, and is intended to have
compatible options. For simple setups, a user should be able to write
something like:
{...}:
let vcsconfig = {
enable = true;
userName = "John Smith";
userEmail = "js@example.com";
ignores = [ "*.swp" "*~" ];
};
in
{
programs.git = vcsconfig // {...extra git config...};
programs.mercurial = vcsconfig // {...extra hg confg...};
}
For this reason, the ignore options are `ignores` for `syntax: glob`
and `ignoresRegexp` for `syntax: regexp` so that simple glob ignores
can (very likely) be shared with a git config, despite regular
expressions being the default for mercurial.
This variable adds some extra flexibility in constructing the
`~/.bashrc` file. Currently the option is hidden from public
documentation since the option name is provisional.
Forcing fpath to contain unique values increases startup speed by
eliminating extra work of processing duplicated folders.
In addition, it increases startup time when zsh is enabled in both
system and home configuration due to having the same fpath value
between different compinit calls.
Fixes https://github.com/rycee/home-manager/issues/108.
Fixes the error
error: syntax error, unexpected $undefined, expecting IND_STR or
DOLLAR_CURLY or IND_STRING_CLOSE, at
.../home-manager/modules/programs/home-manager.nix:70:47
Before this path would point to the modules path. Using the project
root instead makes it possible to set `<home-manager>` to point to a
downloadable archive of Home Manager. This should make it
significantly easier to install and keep Home Manager up to date.
To match this change we also deprecate the Home Manager option
programs.home-manager.modulesPath
and instead ask users to use
programs.home-manager.path
Note, we still pull in the user's `PATH` in case the user has defined
their own activation blocks that depend on additional tools.
Eventually this will be deprecated and removed.
See #99.
This option gathers basic Vim options into a single place. The idea is
to allow many options without making the Home Manager documentation
too verbose.
This also deprecates the options `programs.vim.lineNumbers` and
`programs.vim.tabSize`.
Fixes#69.
This adds a readonly package option which will be set to the resulting
configured vim package, so it can be refered to by other configuration.
An example would be home.sessionVariables.EDITOR =
config.programs.vim.package + "/bin/vim".
Same motivation as in https://github.com/NixOS/nixpkgs/pull/28378.
zsh.initExtra parameter can be used by external modules which can
redefine user aliases. This change will give user-defined aliases
the highest priority.
1. It slows down the initial start: it takes around 2s at first launch,
and around 0.25s for the following launches;
2. It seems to be redundant since just installing zsh package gives
working completions with correct $fpath set.
If the `home-manager` module is enabled then check if the
`home-manager` package is installed using `nix-env -i` and if so then
it is automatically uninstalled before the new package environment,
which includes home-manager, is installed.
This module is a module to install and configure the home-manager
tool. By managing the home-manager tool through the Home Manager
module system it will be installed/updated on configuration
activation.
This is a module for managing the GNU info directory for the user
profile. See comments at the top of `modules/programs/info.nix` for
further information.
This module generates a `.ssh/config` file. This doesn't embed _all_
options for the ssh client, but the most common ones should be there.
Example usage:
```nix
programs.ssh = {
enable = true;
forwardAgent = true;
controlMaster = "auto";
matchBlocks = [
{
host = "something.blah.edu";
port = 1024;
user = "cleague";
identitiesOnly = true;
}
{
host = "host1 host2 host2.net host2.com";
port = 7422;
hostname = "example.com";
serverAliveInterval = 60;
}
{
host = "lucian";
forwardX11 = true;
forwardX11Trusted = true;
checkHostIP = false;
};
};
};
```
Each entry in `programs.ssh.matchBlocks` must contain a `host` field,
which will be used for the block condition.
For example, with these settings Bash will complain if uninitialized
variables are used. Some code has been improved to run cleanly with
these settings.
If the dconf service hasn't been installed then the configuration
activation will fail. Thus, make sure the activation script is run after
packages have been installed.
