home-manager/doc/installation.adoc

[[ch-installation]]
== Installing Home Manager

:nix-darwin: https://github.com/LnL7/nix-darwin/

Home Manager can be used in three primary ways:

1. Using the standalone `home-manager` tool. For platforms other than
NixOS and Darwin, this is the only available choice. It is also
recommended for people on NixOS or Darwin that want to manage their
home directory independent of the system as a whole. See
<<sec-install-standalone>> for instructions on how to perform this
installation.

2. As a module within a NixOS system configuration. This allows the
user profiles to be built together with the system when running
`nixos-rebuild`. See <<sec-install-nixos-module>> for a description of
this setup.

3. As a module within a {nix-darwin}[nix-darwin] system configuration.
This allows the user profiles to be built together with the system
when running `darwin-rebuild`. See <<sec-install-nix-darwin-module>>
for a description of this setup.

[[sec-install-standalone]]
=== Standalone installation

:nix-allowed-users: https://nixos.org/nix/manual/#conf-allowed-users
:nixos-allowed-users: https://nixos.org/nixos/manual/options.html#opt-nix.allowedUsers

1. Make sure you have a working Nix installation. Specifically, make
sure that your user is able to build and install Nix packages. For
example, you should be able to successfully run a command like
`nix-instantiate '<nixpkgs>' -A hello` without having to switch to the
root user. For a multi-user install of Nix this means that your user
must be covered by the {nix-allowed-users}[`allowed-users`] Nix
option. On NixOS you can control this option using the
{nixos-allowed-users}[`nix.allowedUsers`] system option.

2. Add the Home Manager channel that you wish to follow. This is done
by running
+
[source,console]
----
$ nix-channel --add https://github.com/nix-community/home-manager/archive/master.tar.gz home-manager
$ nix-channel --update
----
+
if you are following Nixpkgs master or an unstable channel and
+
[source,console]
----
$ nix-channel --add https://github.com/nix-community/home-manager/archive/release-20.09.tar.gz home-manager
$ nix-channel --update
----
+
if you follow a Nixpkgs version 20.09 channel.
+
On NixOS you may need to log out and back in for the channel to become
available. On non-NixOS you may have to add
+
[source,bash]
export NIX_PATH=$HOME/.nix-defexpr/channels${NIX_PATH:+:}$NIX_PATH
+
to your shell (see
https://github.com/NixOS/nix/issues/2033[nix#2033]).

3. Run the Home Manager installation command and create the first Home
Manager generation:
+
[source,console]
$ nix-shell '<home-manager>' -A install
+
Once finished, Home Manager should be active and available in your
user environment.

4. If you do not plan on having Home Manager manage your shell
configuration then you must source the
+
[source,bash]
$HOME/.nix-profile/etc/profile.d/hm-session-vars.sh
+
file in your shell configuration. Unfortunately, we currently only
support POSIX.2-like shells such as
https://www.gnu.org/software/bash/[Bash] or
http://zsh.sourceforge.net/[Z shell].
+
For example, if you use Bash then add
+
[source,bash]
----
. "$HOME/.nix-profile/etc/profile.d/hm-session-vars.sh"
----
+
to your `~/.profile` file.

If instead of using channels you want to run Home Manager from a Git
checkout of the repository then you can use the
<<opt-programs.home-manager.path>> option to specify the absolute path
to the repository.

[[sec-install-nixos-module]]
=== NixOS module

Home Manager provides a NixOS module that allows you to prepare user
environments directly from the system configuration file, which often
is more convenient than using the `home-manager` tool. It also opens
up additional possibilities, for example, to automatically configure
user environments in NixOS declarative containers or on systems
deployed through NixOps.

To make the NixOS module available for use you must `import` it into
your system configuration. This is most conveniently done by adding a
Home Manager channel, for example

[source,console]
----
# nix-channel --add https://github.com/nix-community/home-manager/archive/master.tar.gz home-manager
# nix-channel --update
----

if you are following Nixpkgs master or an unstable channel and

[source,console]
----
# nix-channel --add https://github.com/nix-community/home-manager/archive/release-20.09.tar.gz home-manager
# nix-channel --update
----

if you follow a Nixpkgs version 20.09 channel.

It is then possible to add

[source,nix]
imports = [ <home-manager/nixos> ];

to your system `configuration.nix` file, which will introduce a new
NixOS option called `home-manager.users` whose type is an attribute
set that maps user names to Home Manager configurations.

For example, a NixOS configuration may include the lines

[source,nix]
----
users.users.eve.isNormalUser = true;
home-manager.users.eve = { pkgs, ... }: {
  home.packages = [ pkgs.atool pkgs.httpie ];
  programs.bash.enable = true;
};
----

and after a `nixos-rebuild switch` the user eve's environment should
include a basic Bash configuration and the packages atool and httpie.

[NOTE]
====
By default packages will be installed to `$HOME/.nix-profile` but they
can be installed to `/etc/profiles` if

[source,nix]
home-manager.useUserPackages = true;

is added to the system configuration. This is necessary if, for
example, you wish to use `nixos-rebuild build-vm`. This option may
become the default value in the future.
====

[NOTE]
====
By default, Home Manager uses a private `pkgs` instance that is
configured via the `home-manager.users.<name>.nixpkgs` options. To
instead use the global `pkgs` that is configured via the system level
`nixpkgs` options, set

[source,nix]
home-manager.useGlobalPkgs = true;

This saves an extra Nixpkgs evaluation, adds consistency, and removes
the dependency on `NIX_PATH`, which is otherwise used for importing
Nixpkgs.
====

[[sec-install-nix-darwin-module]]
=== nix-darwin module

Home Manager provides a module that allows you to prepare user
environments directly from the {nix-darwin}[nix-darwin] configuration
file, which often is more convenient than using the `home-manager`
tool.

To make the NixOS module available for use you must `import` it into
your system configuration. This is most conveniently done by adding a
Home Manager channel, for example

[source,console]
----
# nix-channel --add https://github.com/nix-community/home-manager/archive/master.tar.gz home-manager
# nix-channel --update
----

if you are following Nixpkgs master or an unstable channel and

[source,console]
----
# nix-channel --add https://github.com/nix-community/home-manager/archive/release-20.09.tar.gz home-manager
# nix-channel --update
----

if you follow a Nixpkgs version 20.09 channel.

It is then possible to add

[source,nix]
imports = [ <home-manager/nix-darwin> ];

to your nix-darwin `configuration.nix` file, which will introduce a
new NixOS option called `home-manager` whose type is an attribute set
that maps user names to Home Manager configurations.

For example, a nix-darwin configuration may include the lines

[source,nix]
----
home-manager.users.eve = { pkgs, ... }: {
  home.packages = [ pkgs.atool pkgs.httpie ];
  programs.bash.enable = true;
};
----

and after a `darwin-rebuild --switch` the user eve's environment
should include a basic Bash configuration and the packages atool and
httpie.

[NOTE]
====
By default user packages will not be ignored in favor of
`environment.systemPackages`, but they will be intalled to
`/etc/profiles/per-user/$USERNAME` if

[source,nix]
home-manager.useUserPackages = true;

is added to the nix-darwin configuration. This option may become the
default value in the future.
====

[NOTE]
====
By default, Home Manager uses a private `pkgs` instance that is
configured via the `home-manager.users.<name>.nixpkgs` options. To
instead use the global `pkgs` that is configured via the system level
`nixpkgs` options, set

[source,nix]
home-manager.useGlobalPkgs = true;

This saves an extra Nixpkgs evaluation, adds consistency, and removes
the dependency on `NIX_PATH`, which is otherwise used for importing
Nixpkgs.
====